From 8f6429c7cb59f28433253575cc8e3262eed63592 Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Thu, 16 Jul 2015 19:40:12 +0100 Subject: iommu/iova: Avoid over-allocating when size-aligned Currently, allocating a size-aligned IOVA region quietly adjusts the actual allocation size in the process, returning a rounded-up power-of-two-sized allocation. This results in mismatched behaviour in the IOMMU driver if the original size was not a power of two, where the original size is mapped, but the rounded-up IOVA size is unmapped. Whilst some IOMMUs will happily unmap already-unmapped pages, others consider this an error, so fix it by computing the necessary alignment padding without altering the actual allocation size. Also clean up by making pad_size unsigned, since its callers always pass unsigned values and negative padding makes little sense here anyway. Signed-off-by: Robin Murphy Signed-off-by: David Woodhouse --- drivers/iommu/intel-iommu.c | 2 ++ drivers/iommu/iova.c | 23 ++++++----------------- 2 files changed, 8 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index a98a7b27aca1..92101597cede 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -3233,6 +3233,8 @@ static struct iova *intel_alloc_iova(struct device *dev, /* Restrict dma_mask to the width that the iommu can handle */ dma_mask = min_t(uint64_t, DOMAIN_MAX_ADDR(domain->gaw), dma_mask); + /* Ensure we reserve the whole size-aligned region */ + nrpages = __roundup_pow_of_two(nrpages); if (!dmar_forcedac && dma_mask > DMA_BIT_MASK(32)) { /* diff --git a/drivers/iommu/iova.c b/drivers/iommu/iova.c index b7c3d923f3e1..29f2efcf668e 100644 --- a/drivers/iommu/iova.c +++ b/drivers/iommu/iova.c @@ -120,19 +120,14 @@ __cached_rbnode_delete_update(struct iova_domain *iovad, struct iova *free) } } -/* Computes the padding size required, to make the - * the start address naturally aligned on its size +/* + * Computes the padding size required, to make the start address + * naturally aligned on the power-of-two order of its size */ -static int -iova_get_pad_size(int size, unsigned int limit_pfn) +static unsigned int +iova_get_pad_size(unsigned int size, unsigned int limit_pfn) { - unsigned int pad_size = 0; - unsigned int order = ilog2(size); - - if (order) - pad_size = (limit_pfn + 1) % (1 << order); - - return pad_size; + return (limit_pfn + 1 - size) & (__roundup_pow_of_two(size) - 1); } static int __alloc_and_insert_iova_range(struct iova_domain *iovad, @@ -265,12 +260,6 @@ alloc_iova(struct iova_domain *iovad, unsigned long size, if (!new_iova) return NULL; - /* If size aligned is set then round the size to - * to next power of two. - */ - if (size_aligned) - size = __roundup_pow_of_two(size); - ret = __alloc_and_insert_iova_range(iovad, size, limit_pfn, new_iova, size_aligned); -- cgit v1.2.3 From ae1ff3d623905947158fd3394854c23026337810 Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Mon, 13 Jul 2015 14:31:28 +0300 Subject: iommu: iova: Move iova cache management to the iova library This is necessary to separate intel-iommu from the iova library. Signed-off-by: Sakari Ailus Signed-off-by: David Woodhouse --- drivers/iommu/intel-iommu.c | 6 ++-- drivers/iommu/iova.c | 83 ++++++++++++++++++++++++++------------------- 2 files changed, 52 insertions(+), 37 deletions(-) (limited to 'drivers') diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index 92101597cede..2d5cf39e1053 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -3743,7 +3743,7 @@ static inline int iommu_devinfo_cache_init(void) static int __init iommu_init_mempool(void) { int ret; - ret = iommu_iova_cache_init(); + ret = iova_cache_get(); if (ret) return ret; @@ -3757,7 +3757,7 @@ static int __init iommu_init_mempool(void) kmem_cache_destroy(iommu_domain_cache); domain_error: - iommu_iova_cache_destroy(); + iova_cache_put(); return -ENOMEM; } @@ -3766,7 +3766,7 @@ static void __init iommu_exit_mempool(void) { kmem_cache_destroy(iommu_devinfo_cache); kmem_cache_destroy(iommu_domain_cache); - iommu_iova_cache_destroy(); + iova_cache_put(); } static void quirk_ioat_snb_local_iommu(struct pci_dev *pdev) diff --git a/drivers/iommu/iova.c b/drivers/iommu/iova.c index 29f2efcf668e..ed95f7a0fad3 100644 --- a/drivers/iommu/iova.c +++ b/drivers/iommu/iova.c @@ -20,40 +20,6 @@ #include #include -static struct kmem_cache *iommu_iova_cache; - -int iommu_iova_cache_init(void) -{ - int ret = 0; - - iommu_iova_cache = kmem_cache_create("iommu_iova", - sizeof(struct iova), - 0, - SLAB_HWCACHE_ALIGN, - NULL); - if (!iommu_iova_cache) { - pr_err("Couldn't create iova cache\n"); - ret = -ENOMEM; - } - - return ret; -} - -void iommu_iova_cache_destroy(void) -{ - kmem_cache_destroy(iommu_iova_cache); -} - -struct iova *alloc_iova_mem(void) -{ - return kmem_cache_alloc(iommu_iova_cache, GFP_ATOMIC); -} - -void free_iova_mem(struct iova *iova) -{ - kmem_cache_free(iommu_iova_cache, iova); -} - void init_iova_domain(struct iova_domain *iovad, unsigned long granule, unsigned long start_pfn, unsigned long pfn_32bit) @@ -237,6 +203,55 @@ iova_insert_rbtree(struct rb_root *root, struct iova *iova) rb_insert_color(&iova->node, root); } +static struct kmem_cache *iova_cache; +static unsigned int iova_cache_users; +static DEFINE_MUTEX(iova_cache_mutex); + +struct iova *alloc_iova_mem(void) +{ + return kmem_cache_alloc(iova_cache, GFP_ATOMIC); +} +EXPORT_SYMBOL(alloc_iova_mem); + +void free_iova_mem(struct iova *iova) +{ + kmem_cache_free(iova_cache, iova); +} +EXPORT_SYMBOL(free_iova_mem); + +int iova_cache_get(void) +{ + mutex_lock(&iova_cache_mutex); + if (!iova_cache_users) { + iova_cache = kmem_cache_create( + "iommu_iova", sizeof(struct iova), 0, + SLAB_HWCACHE_ALIGN, NULL); + if (!iova_cache) { + mutex_unlock(&iova_cache_mutex); + printk(KERN_ERR "Couldn't create iova cache\n"); + return -ENOMEM; + } + } + + iova_cache_users++; + mutex_unlock(&iova_cache_mutex); + + return 0; +} + +void iova_cache_put(void) +{ + mutex_lock(&iova_cache_mutex); + if (WARN_ON(!iova_cache_users)) { + mutex_unlock(&iova_cache_mutex); + return; + } + iova_cache_users--; + if (!iova_cache_users) + kmem_cache_destroy(iova_cache); + mutex_unlock(&iova_cache_mutex); +} + /** * alloc_iova - allocates an iova * @iovad: - iova domain in question -- cgit v1.2.3 From 9b41760b03816b34f4c9eee2cbb8fda8439920fc Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Mon, 13 Jul 2015 14:31:29 +0300 Subject: iommu: iova: Export symbols Use EXPORT_SYMBOL_GPL() to export the iova library symbols. The symbols include: init_iova_domain(); iova_cache_get(); iova_cache_put(); iova_cache_init(); alloc_iova(); find_iova(); __free_iova(); free_iova(); put_iova_domain(); reserve_iova(); copy_reserved_iova(); Signed-off-by: Sakari Ailus Signed-off-by: David Woodhouse --- drivers/iommu/iova.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/iommu/iova.c b/drivers/iommu/iova.c index ed95f7a0fad3..cbd74c79b212 100644 --- a/drivers/iommu/iova.c +++ b/drivers/iommu/iova.c @@ -38,6 +38,7 @@ init_iova_domain(struct iova_domain *iovad, unsigned long granule, iovad->start_pfn = start_pfn; iovad->dma_32bit_pfn = pfn_32bit; } +EXPORT_SYMBOL_GPL(init_iova_domain); static struct rb_node * __get_cached_rbnode(struct iova_domain *iovad, unsigned long *limit_pfn) @@ -238,6 +239,7 @@ int iova_cache_get(void) return 0; } +EXPORT_SYMBOL_GPL(iova_cache_get); void iova_cache_put(void) { @@ -251,6 +253,7 @@ void iova_cache_put(void) kmem_cache_destroy(iova_cache); mutex_unlock(&iova_cache_mutex); } +EXPORT_SYMBOL_GPL(iova_cache_put); /** * alloc_iova - allocates an iova @@ -285,6 +288,7 @@ alloc_iova(struct iova_domain *iovad, unsigned long size, return new_iova; } +EXPORT_SYMBOL_GPL(alloc_iova); /** * find_iova - find's an iova for a given pfn @@ -325,6 +329,7 @@ struct iova *find_iova(struct iova_domain *iovad, unsigned long pfn) spin_unlock_irqrestore(&iovad->iova_rbtree_lock, flags); return NULL; } +EXPORT_SYMBOL_GPL(find_iova); /** * __free_iova - frees the given iova @@ -343,6 +348,7 @@ __free_iova(struct iova_domain *iovad, struct iova *iova) spin_unlock_irqrestore(&iovad->iova_rbtree_lock, flags); free_iova_mem(iova); } +EXPORT_SYMBOL_GPL(__free_iova); /** * free_iova - finds and frees the iova for a given pfn @@ -360,6 +366,7 @@ free_iova(struct iova_domain *iovad, unsigned long pfn) __free_iova(iovad, iova); } +EXPORT_SYMBOL_GPL(free_iova); /** * put_iova_domain - destroys the iova doamin @@ -382,6 +389,7 @@ void put_iova_domain(struct iova_domain *iovad) } spin_unlock_irqrestore(&iovad->iova_rbtree_lock, flags); } +EXPORT_SYMBOL_GPL(put_iova_domain); static int __is_range_overlap(struct rb_node *node, @@ -471,6 +479,7 @@ finish: spin_unlock_irqrestore(&iovad->iova_rbtree_lock, flags); return iova; } +EXPORT_SYMBOL_GPL(reserve_iova); /** * copy_reserved_iova - copies the reserved between domains @@ -497,6 +506,7 @@ copy_reserved_iova(struct iova_domain *from, struct iova_domain *to) } spin_unlock_irqrestore(&from->iova_rbtree_lock, flags); } +EXPORT_SYMBOL_GPL(copy_reserved_iova); struct iova * split_and_remove_iova(struct iova_domain *iovad, struct iova *iova, -- cgit v1.2.3 From 15bbdec3931e617231c12b0920e497e87ec8c2c6 Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Mon, 13 Jul 2015 14:31:30 +0300 Subject: iommu: Make the iova library a module The iova library has use outside the intel-iommu driver, thus make it a module. Signed-off-by: Sakari Ailus Signed-off-by: David Woodhouse --- drivers/iommu/Kconfig | 2 +- drivers/iommu/iova.c | 4 ++++ 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig index f1fb1d3ccc56..0a141cd44ddd 100644 --- a/drivers/iommu/Kconfig +++ b/drivers/iommu/Kconfig @@ -42,7 +42,7 @@ config IOMMU_IO_PGTABLE_LPAE_SELFTEST endmenu config IOMMU_IOVA - bool + tristate config OF_IOMMU def_bool y diff --git a/drivers/iommu/iova.c b/drivers/iommu/iova.c index cbd74c79b212..fa0adef32bd6 100644 --- a/drivers/iommu/iova.c +++ b/drivers/iommu/iova.c @@ -18,6 +18,7 @@ */ #include +#include #include void @@ -548,3 +549,6 @@ error: free_iova_mem(prev); return NULL; } + +MODULE_AUTHOR("Anil S Keshavamurthy "); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 135919a3a80565070b9645009e65f73e72c661c0 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 9 Sep 2015 13:35:05 -0400 Subject: intel_idle: Skylake Client Support - updated Addition of PC9 state, and minor tweaks to existing PC6 and PC8 states. Signed-off-by: Len Brown --- drivers/idle/intel_idle.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index 3a3738fe016b..cd4510a63375 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -620,7 +620,7 @@ static struct cpuidle_state skl_cstates[] = { .name = "C6-SKL", .desc = "MWAIT 0x20", .flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED, - .exit_latency = 75, + .exit_latency = 85, .target_residency = 200, .enter = &intel_idle, .enter_freeze = intel_idle_freeze, }, @@ -636,10 +636,18 @@ static struct cpuidle_state skl_cstates[] = { .name = "C8-SKL", .desc = "MWAIT 0x40", .flags = MWAIT2flg(0x40) | CPUIDLE_FLAG_TLB_FLUSHED, - .exit_latency = 174, + .exit_latency = 200, .target_residency = 800, .enter = &intel_idle, .enter_freeze = intel_idle_freeze, }, + { + .name = "C9-SKL", + .desc = "MWAIT 0x50", + .flags = MWAIT2flg(0x50) | CPUIDLE_FLAG_TLB_FLUSHED, + .exit_latency = 480, + .target_residency = 5000, + .enter = &intel_idle, + .enter_freeze = intel_idle_freeze, }, { .name = "C10-SKL", .desc = "MWAIT 0x60", -- cgit v1.2.3 From 52f5664a87474894e7da44f3b778dbe4e4c740b7 Mon Sep 17 00:00:00 2001 From: Ariel Nahum Date: Thu, 3 Sep 2015 19:49:55 +0300 Subject: libiscsi: Fix iscsi_check_transport_timeouts possible infinite loop Connection last_ping is not being updated when iscsi_send_nopout fails. Not updating the last_ping will cause firing a timer to a past time (last_ping + ping_tmo < current_time) which triggers an infinite loop of iscsi_check_transport_timeouts() and hogs the cpu. Fix this issue by checking the return value of iscsi_send_nopout. If it fails set the next_timeout to one second later. Signed-off-by: Ariel Nahum Signed-off-by: Sagi Grimberg Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/libiscsi.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 33c74d3436c9..6bffd91b973a 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -976,13 +976,13 @@ static void iscsi_tmf_rsp(struct iscsi_conn *conn, struct iscsi_hdr *hdr) wake_up(&conn->ehwait); } -static void iscsi_send_nopout(struct iscsi_conn *conn, struct iscsi_nopin *rhdr) +static int iscsi_send_nopout(struct iscsi_conn *conn, struct iscsi_nopin *rhdr) { struct iscsi_nopout hdr; struct iscsi_task *task; if (!rhdr && conn->ping_task) - return; + return -EINVAL; memset(&hdr, 0, sizeof(struct iscsi_nopout)); hdr.opcode = ISCSI_OP_NOOP_OUT | ISCSI_OP_IMMEDIATE; @@ -996,13 +996,16 @@ static void iscsi_send_nopout(struct iscsi_conn *conn, struct iscsi_nopin *rhdr) hdr.ttt = RESERVED_ITT; task = __iscsi_conn_send_pdu(conn, (struct iscsi_hdr *)&hdr, NULL, 0); - if (!task) + if (!task) { iscsi_conn_printk(KERN_ERR, conn, "Could not send nopout\n"); - else if (!rhdr) { + return -EIO; + } else if (!rhdr) { /* only track our nops */ conn->ping_task = task; conn->last_ping = jiffies; } + + return 0; } static int iscsi_nop_out_rsp(struct iscsi_task *task, @@ -2092,8 +2095,10 @@ static void iscsi_check_transport_timeouts(unsigned long data) if (time_before_eq(last_recv + recv_timeout, jiffies)) { /* send a ping to try to provoke some traffic */ ISCSI_DBG_CONN(conn, "Sending nopout as ping\n"); - iscsi_send_nopout(conn, NULL); - next_timeout = conn->last_ping + (conn->ping_timeout * HZ); + if (iscsi_send_nopout(conn, NULL)) + next_timeout = jiffies + (1 * HZ); + else + next_timeout = conn->last_ping + (conn->ping_timeout * HZ); } else next_timeout = last_recv + recv_timeout; -- cgit v1.2.3 From b763ec17ac762470eec5be8ebcc43e4f8b2c2b82 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 19 Sep 2015 07:00:18 -0700 Subject: regmap: debugfs: Ensure we don't underflow when printing access masks If a read is attempted which is smaller than the line length then we may underflow the subtraction we're doing with the unsigned size_t type so move some of the calculation to be additions on the right hand side instead in order to avoid this. Reported-by: Rasmus Villemoes Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/base/regmap/regmap-debugfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/base/regmap/regmap-debugfs.c b/drivers/base/regmap/regmap-debugfs.c index f42f2bac6466..1f327898e53d 100644 --- a/drivers/base/regmap/regmap-debugfs.c +++ b/drivers/base/regmap/regmap-debugfs.c @@ -432,7 +432,7 @@ static ssize_t regmap_access_read_file(struct file *file, /* If we're in the region the user is trying to read */ if (p >= *ppos) { /* ...but not beyond it */ - if (buf_pos >= count - 1 - tot_len) + if (buf_pos + tot_len + 1 >= count) break; /* Format the register */ -- cgit v1.2.3 From 176fc2d5770a0990eebff903ba680d2edd32e718 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 19 Sep 2015 07:12:34 -0700 Subject: regmap: debugfs: Don't bother actually printing when calculating max length The in kernel snprintf() will conveniently return the actual length of the printed string even if not given an output beffer at all so just do that rather than relying on the user to pass in a suitable buffer, ensuring that we don't need to worry if the buffer was truncated due to the size of the buffer passed in. Reported-by: Rasmus Villemoes Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/base/regmap/regmap-debugfs.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/base/regmap/regmap-debugfs.c b/drivers/base/regmap/regmap-debugfs.c index 1f327898e53d..4c55cfbad19e 100644 --- a/drivers/base/regmap/regmap-debugfs.c +++ b/drivers/base/regmap/regmap-debugfs.c @@ -32,8 +32,7 @@ static DEFINE_MUTEX(regmap_debugfs_early_lock); /* Calculate the length of a fixed format */ static size_t regmap_calc_reg_len(int max_val, char *buf, size_t buf_size) { - snprintf(buf, buf_size, "%x", max_val); - return strlen(buf); + return snprintf(NULL, 0, "%x", max_val); } static ssize_t regmap_name_read_file(struct file *file, -- cgit v1.2.3 From b9ab471b71900ca8a670ecf4f1cc65b626953655 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Mon, 14 Sep 2015 10:38:31 -0700 Subject: Input: pm8941-pwrkey - remove unneded semicolon It's not needed and is just creating a null statement so remove it. Signed-off-by: Javier Martinez Canillas Signed-off-by: Dmitry Torokhov --- drivers/input/misc/pm8941-pwrkey.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/misc/pm8941-pwrkey.c b/drivers/input/misc/pm8941-pwrkey.c index 867db8a91372..e317b75357a0 100644 --- a/drivers/input/misc/pm8941-pwrkey.c +++ b/drivers/input/misc/pm8941-pwrkey.c @@ -93,7 +93,7 @@ static int pm8941_reboot_notify(struct notifier_block *nb, default: reset_type = PON_PS_HOLD_TYPE_HARD_RESET; break; - }; + } error = regmap_update_bits(pwrkey->regmap, pwrkey->baseaddr + PON_PS_HOLD_RST_CTL, -- cgit v1.2.3 From 86a39bffc4e94f80527c14fe00a3acb432910ef3 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Mon, 14 Sep 2015 10:38:39 -0700 Subject: Input: mms114 - remove unneded semicolons They aren't needed and are just creating null statements so remove it. Signed-off-by: Javier Martinez Canillas Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/mms114.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/mms114.c b/drivers/input/touchscreen/mms114.c index 7cce87650fc8..1fafc9f57af6 100644 --- a/drivers/input/touchscreen/mms114.c +++ b/drivers/input/touchscreen/mms114.c @@ -394,12 +394,12 @@ static struct mms114_platform_data *mms114_parse_dt(struct device *dev) if (of_property_read_u32(np, "x-size", &pdata->x_size)) { dev_err(dev, "failed to get x-size property\n"); return NULL; - }; + } if (of_property_read_u32(np, "y-size", &pdata->y_size)) { dev_err(dev, "failed to get y-size property\n"); return NULL; - }; + } of_property_read_u32(np, "contact-threshold", &pdata->contact_threshold); -- cgit v1.2.3 From 46b018fa95003f8159f5fcf9b8cd89acaea34e31 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sat, 5 Sep 2015 10:19:38 -0700 Subject: Input: walkera0701 - fix abs() calculations on 64 bit values abs() function can not be used with 64 bit values, so let's switch to abs64(). From include/linux/kernel.h: /* * abs() handles unsigned and signed longs, ints, shorts and chars. * For all input types abs() returns a signed long. * abs() should not be used for 64-bit types (s64, u64, long long) * - use abs64() for those. */ Reported-by: Joe Perches Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/walkera0701.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/input/joystick/walkera0701.c b/drivers/input/joystick/walkera0701.c index b76ac580703c..a8bc2fe170dd 100644 --- a/drivers/input/joystick/walkera0701.c +++ b/drivers/input/joystick/walkera0701.c @@ -150,7 +150,7 @@ static void walkera0701_irq_handler(void *handler_data) if (w->counter == 24) { /* full frame */ walkera0701_parse_frame(w); w->counter = NO_SYNC; - if (abs(pulse_time - SYNC_PULSE) < RESERVE) /* new frame sync */ + if (abs64(pulse_time - SYNC_PULSE) < RESERVE) /* new frame sync */ w->counter = 0; } else { if ((pulse_time > (ANALOG_MIN_PULSE - RESERVE) @@ -161,7 +161,7 @@ static void walkera0701_irq_handler(void *handler_data) } else w->counter = NO_SYNC; } - } else if (abs(pulse_time - SYNC_PULSE - BIN0_PULSE) < + } else if (abs64(pulse_time - SYNC_PULSE - BIN0_PULSE) < RESERVE + BIN1_PULSE - BIN0_PULSE) /* frame sync .. */ w->counter = 0; -- cgit v1.2.3 From 6cc527b05847984990a09ef028b2f670bbc72c46 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 14 Sep 2015 10:36:35 -0700 Subject: Input: imx6ul_tsc - propagate the errors imx6ul_adc_init() may fail in two cases, so we should better propagate the errors and make sure that the callers of this function also check and propagate the errors accordingly. Signed-off-by: Fabio Estevam Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/imx6ul_tsc.c | 28 +++++++++++++++++++--------- 1 file changed, 19 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/imx6ul_tsc.c b/drivers/input/touchscreen/imx6ul_tsc.c index ff0b75813daa..0a96b76f6021 100644 --- a/drivers/input/touchscreen/imx6ul_tsc.c +++ b/drivers/input/touchscreen/imx6ul_tsc.c @@ -94,7 +94,7 @@ struct imx6ul_tsc { * TSC module need ADC to get the measure value. So * before config TSC, we should initialize ADC module. */ -static void imx6ul_adc_init(struct imx6ul_tsc *tsc) +static int imx6ul_adc_init(struct imx6ul_tsc *tsc) { int adc_hc = 0; int adc_gc; @@ -122,17 +122,23 @@ static void imx6ul_adc_init(struct imx6ul_tsc *tsc) timeout = wait_for_completion_timeout (&tsc->completion, ADC_TIMEOUT); - if (timeout == 0) + if (timeout == 0) { dev_err(tsc->dev, "Timeout for adc calibration\n"); + return -ETIMEDOUT; + } adc_gs = readl(tsc->adc_regs + REG_ADC_GS); - if (adc_gs & ADC_CALF) + if (adc_gs & ADC_CALF) { dev_err(tsc->dev, "ADC calibration failed\n"); + return -EINVAL; + } /* TSC need the ADC work in hardware trigger */ adc_cfg = readl(tsc->adc_regs + REG_ADC_CFG); adc_cfg |= ADC_HARDWARE_TRIGGER; writel(adc_cfg, tsc->adc_regs + REG_ADC_CFG); + + return 0; } /* @@ -188,11 +194,17 @@ static void imx6ul_tsc_set(struct imx6ul_tsc *tsc) writel(start, tsc->tsc_regs + REG_TSC_FLOW_CONTROL); } -static void imx6ul_tsc_init(struct imx6ul_tsc *tsc) +static int imx6ul_tsc_init(struct imx6ul_tsc *tsc) { - imx6ul_adc_init(tsc); + int err; + + err = imx6ul_adc_init(tsc); + if (err) + return err; imx6ul_tsc_channel_config(tsc); imx6ul_tsc_set(tsc); + + return 0; } static void imx6ul_tsc_disable(struct imx6ul_tsc *tsc) @@ -311,9 +323,7 @@ static int imx6ul_tsc_open(struct input_dev *input_dev) return err; } - imx6ul_tsc_init(tsc); - - return 0; + return imx6ul_tsc_init(tsc); } static void imx6ul_tsc_close(struct input_dev *input_dev) @@ -491,7 +501,7 @@ static int __maybe_unused imx6ul_tsc_resume(struct device *dev) goto out; } - imx6ul_tsc_init(tsc); + retval = imx6ul_tsc_init(tsc); } out: -- cgit v1.2.3 From 3905de62b2624a4574776b3b7ddfa97758b75edc Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 14 Sep 2015 10:37:08 -0700 Subject: Input: imx6ul_tsc - check for negative return value We should check for negative values returned by platform_get_irq(). Signed-off-by: Fabio Estevam Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/imx6ul_tsc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/imx6ul_tsc.c b/drivers/input/touchscreen/imx6ul_tsc.c index 0a96b76f6021..4957d8b6ca59 100644 --- a/drivers/input/touchscreen/imx6ul_tsc.c +++ b/drivers/input/touchscreen/imx6ul_tsc.c @@ -416,7 +416,7 @@ static int imx6ul_tsc_probe(struct platform_device *pdev) } adc_irq = platform_get_irq(pdev, 1); - if (adc_irq <= 0) { + if (adc_irq < 0) { dev_err(&pdev->dev, "no adc irq resource?\n"); return adc_irq; } -- cgit v1.2.3 From 5eab3cf3e48cf658f3432e8ba31436d5a4f6a219 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 14 Sep 2015 10:37:31 -0700 Subject: Input: imx6ul_tsc - use the preferred method for kzalloc() According to Documentation/CodingStyle: "The preferred form for passing a size of a struct is the following: p = kmalloc(sizeof(*p), ...);" so do as suggested. Signed-off-by: Fabio Estevam Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/imx6ul_tsc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/imx6ul_tsc.c b/drivers/input/touchscreen/imx6ul_tsc.c index 4957d8b6ca59..67c73f2e7e3a 100644 --- a/drivers/input/touchscreen/imx6ul_tsc.c +++ b/drivers/input/touchscreen/imx6ul_tsc.c @@ -347,7 +347,7 @@ static int imx6ul_tsc_probe(struct platform_device *pdev) int tsc_irq; int adc_irq; - tsc = devm_kzalloc(&pdev->dev, sizeof(struct imx6ul_tsc), GFP_KERNEL); + tsc = devm_kzalloc(&pdev->dev, sizeof(*tsc), GFP_KERNEL); if (!tsc) return -ENOMEM; -- cgit v1.2.3 From 002801fc5372ecb725f0d7939f88ca752ce1d499 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 14 Sep 2015 10:37:55 -0700 Subject: Input: imx6ul_tsc - fix controller name We should better write "Touchscreen". Signed-off-by: Fabio Estevam Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/imx6ul_tsc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/imx6ul_tsc.c b/drivers/input/touchscreen/imx6ul_tsc.c index 67c73f2e7e3a..8275267eac25 100644 --- a/drivers/input/touchscreen/imx6ul_tsc.c +++ b/drivers/input/touchscreen/imx6ul_tsc.c @@ -355,7 +355,7 @@ static int imx6ul_tsc_probe(struct platform_device *pdev) if (!input_dev) return -ENOMEM; - input_dev->name = "iMX6UL TouchScreen Controller"; + input_dev->name = "iMX6UL Touchscreen Controller"; input_dev->id.bustype = BUS_HOST; input_dev->open = imx6ul_tsc_open; -- cgit v1.2.3 From 3245acbce952cda75b2fafa8e40452ef0c4756c1 Mon Sep 17 00:00:00 2001 From: Luis de Bethencourt Date: Thu, 17 Sep 2015 18:09:11 +0200 Subject: hwmon: (abx500) Fix module autoload for OF platform driver This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt Signed-off-by: Guenter Roeck --- drivers/hwmon/abx500.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/hwmon/abx500.c b/drivers/hwmon/abx500.c index 6cb89c0ebab6..1fd46859ed29 100644 --- a/drivers/hwmon/abx500.c +++ b/drivers/hwmon/abx500.c @@ -470,6 +470,7 @@ static const struct of_device_id abx500_temp_match[] = { { .compatible = "stericsson,abx500-temp" }, {}, }; +MODULE_DEVICE_TABLE(of, abx500_temp_match); #endif static struct platform_driver abx500_temp_driver = { -- cgit v1.2.3 From fe5152882a45a2545d44d39fe29badc8e4f66ad3 Mon Sep 17 00:00:00 2001 From: Luis de Bethencourt Date: Thu, 17 Sep 2015 18:09:28 +0200 Subject: hwmon: (gpio-fan) Fix module autoload for OF platform driver This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt Signed-off-by: Guenter Roeck --- drivers/hwmon/gpio-fan.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c index a3dae6d0082a..82de3deeb18a 100644 --- a/drivers/hwmon/gpio-fan.c +++ b/drivers/hwmon/gpio-fan.c @@ -539,6 +539,7 @@ static const struct of_device_id of_gpio_fan_match[] = { { .compatible = "gpio-fan", }, {}, }; +MODULE_DEVICE_TABLE(of, of_gpio_fan_match); #endif /* CONFIG_OF_GPIO */ static int gpio_fan_probe(struct platform_device *pdev) -- cgit v1.2.3 From f491e70ccffa5d19aa51c958909320fa1f3905ed Mon Sep 17 00:00:00 2001 From: Luis de Bethencourt Date: Thu, 17 Sep 2015 18:09:55 +0200 Subject: hwmon: (pwm-fan) Fix module autoload for OF platform driver This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt Signed-off-by: Guenter Roeck --- drivers/hwmon/pwm-fan.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c index 2d9a712699ff..3e23003f78b0 100644 --- a/drivers/hwmon/pwm-fan.c +++ b/drivers/hwmon/pwm-fan.c @@ -323,6 +323,7 @@ static const struct of_device_id of_pwm_fan_match[] = { { .compatible = "pwm-fan", }, {}, }; +MODULE_DEVICE_TABLE(of, of_pwm_fan_match); static struct platform_driver pwm_fan_driver = { .probe = pwm_fan_probe, -- cgit v1.2.3 From 9d7b03f863f2fc8bd80e83d3a2d7e521094d290e Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Sat, 19 Sep 2015 09:49:45 -0700 Subject: Input: elan_i2c - don't require known iap version The Asus X456UA has an ELAN1000 touchpad with IAP version 0xe. This is unknown to elan_get_fwinfo() so driver probe fails and I am left with an unusable touchpad. However, the fwinfo is not required for general driver usage, it is only needed if the user decides to upload new firmware. Adjust the driver so that we do not abort probe when we encounter unexpected IAP version, but rather warn user that firmware update feature of the driver will not work. Signed-off-by: Daniel Drake Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elan_i2c_core.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c index fa945304b9a5..7cad81942b8c 100644 --- a/drivers/input/mouse/elan_i2c_core.c +++ b/drivers/input/mouse/elan_i2c_core.c @@ -266,11 +266,10 @@ static int elan_query_device_info(struct elan_tp_data *data) error = elan_get_fwinfo(data->iap_version, &data->fw_validpage_count, &data->fw_signature_address); - if (error) { - dev_err(&data->client->dev, - "unknown iap version %d\n", data->iap_version); - return error; - } + if (error) + dev_warn(&data->client->dev, + "unexpected iap version %#04x (ic type: %#04x), firmware update will not work\n", + data->iap_version, data->ic_type); return 0; } @@ -486,6 +485,9 @@ static ssize_t elan_sysfs_update_fw(struct device *dev, const u8 *fw_signature; static const u8 signature[] = {0xAA, 0x55, 0xCC, 0x33, 0xFF, 0xFF}; + if (data->fw_validpage_count == 0) + return -EINVAL; + /* Look for a firmware with the product id appended. */ fw_name = kasprintf(GFP_KERNEL, ETP_FW_NAME, data->product_id); if (!fw_name) { -- cgit v1.2.3 From c84333a1c55a2d3329e8b472f59e9d1ccf5ddc1b Mon Sep 17 00:00:00 2001 From: Duson Lin Date: Mon, 21 Sep 2015 09:24:46 -0700 Subject: Input: elan_i2c - add ic type 0x03 The 0x03 is valid 3000 serial ic type too. Signed-off-by: Duson Lin Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elan_i2c_core.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c index 7cad81942b8c..0f8ab3170055 100644 --- a/drivers/input/mouse/elan_i2c_core.c +++ b/drivers/input/mouse/elan_i2c_core.c @@ -102,6 +102,7 @@ static int elan_get_fwinfo(u8 iap_version, u16 *validpage_count, *validpage_count = 512; break; case 0x09: + case 0x03: *validpage_count = 768; break; case 0x0D: -- cgit v1.2.3 From ed75a14eb554995c522a3b861d4c86a7eddb2ad7 Mon Sep 17 00:00:00 2001 From: Duson Lin Date: Mon, 21 Sep 2015 09:26:46 -0700 Subject: Input: elan_i2c - expand maximum product_id form 0xFF to 0xFFFF In order to support more projects in the future, we expand the maximum product_id value form 0xFF to 0xFFFF. Signed-off by: Duson Lin Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elan_i2c.h | 2 +- drivers/input/mouse/elan_i2c_core.c | 4 ++-- drivers/input/mouse/elan_i2c_i2c.c | 4 ++-- drivers/input/mouse/elan_i2c_smbus.c | 4 ++-- 4 files changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/input/mouse/elan_i2c.h b/drivers/input/mouse/elan_i2c.h index 73670f2aebfd..c0ec26118732 100644 --- a/drivers/input/mouse/elan_i2c.h +++ b/drivers/input/mouse/elan_i2c.h @@ -60,7 +60,7 @@ struct elan_transport_ops { int (*get_sm_version)(struct i2c_client *client, u8* ic_type, u8 *version); int (*get_checksum)(struct i2c_client *client, bool iap, u16 *csum); - int (*get_product_id)(struct i2c_client *client, u8 *id); + int (*get_product_id)(struct i2c_client *client, u16 *id); int (*get_max)(struct i2c_client *client, unsigned int *max_x, unsigned int *max_y); diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c index 0f8ab3170055..b51062622050 100644 --- a/drivers/input/mouse/elan_i2c_core.c +++ b/drivers/input/mouse/elan_i2c_core.c @@ -40,7 +40,7 @@ #include "elan_i2c.h" #define DRIVER_NAME "elan_i2c" -#define ELAN_DRIVER_VERSION "1.6.0" +#define ELAN_DRIVER_VERSION "1.6.1" #define ETP_MAX_PRESSURE 255 #define ETP_FWIDTH_REDUCE 90 #define ETP_FINGER_WIDTH 15 @@ -76,7 +76,7 @@ struct elan_tp_data { unsigned int x_res; unsigned int y_res; - u8 product_id; + u16 product_id; u8 fw_version; u8 sm_version; u8 iap_version; diff --git a/drivers/input/mouse/elan_i2c_i2c.c b/drivers/input/mouse/elan_i2c_i2c.c index 683c840c9dd7..a679e56c44cd 100644 --- a/drivers/input/mouse/elan_i2c_i2c.c +++ b/drivers/input/mouse/elan_i2c_i2c.c @@ -276,7 +276,7 @@ static int elan_i2c_get_sm_version(struct i2c_client *client, return 0; } -static int elan_i2c_get_product_id(struct i2c_client *client, u8 *id) +static int elan_i2c_get_product_id(struct i2c_client *client, u16 *id) { int error; u8 val[3]; @@ -287,7 +287,7 @@ static int elan_i2c_get_product_id(struct i2c_client *client, u8 *id) return error; } - *id = val[0]; + *id = le16_to_cpup((__le16 *)val); return 0; } diff --git a/drivers/input/mouse/elan_i2c_smbus.c b/drivers/input/mouse/elan_i2c_smbus.c index ff36a366b2aa..cb6aecbc1dc2 100644 --- a/drivers/input/mouse/elan_i2c_smbus.c +++ b/drivers/input/mouse/elan_i2c_smbus.c @@ -183,7 +183,7 @@ static int elan_smbus_get_sm_version(struct i2c_client *client, return 0; } -static int elan_smbus_get_product_id(struct i2c_client *client, u8 *id) +static int elan_smbus_get_product_id(struct i2c_client *client, u16 *id) { int error; u8 val[3]; @@ -195,7 +195,7 @@ static int elan_smbus_get_product_id(struct i2c_client *client, u8 *id) return error; } - *id = val[1]; + *id = be16_to_cpup((__be16 *)val); return 0; } -- cgit v1.2.3 From 72d4736253af74147b1fa68145b2f4c61d1f37e1 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sat, 19 Sep 2015 11:22:57 -0700 Subject: Input: uinput - fix crash when using ABS events Commit b6d30968d86c45a7bb599eaca13ff048d3fa576c (Input: uinput - switch to using for_each_set_bit()) switched driver to use for_each_set_bit(). However during initial write of the uinput structure that contains min/max data for all possible axes none of them are reflected in dev->absbit yet and so we were skipping over all of them and were not allocating absinfo memory which caused crash later when driver tried to sens EV_ABS events: <1>[ 15.064330] BUG: unable to handle kernel NULL pointer dereference at 0000000000000024 <1>[ 15.064336] IP: [] input_handle_event+0x232/0x4e0 <4>[ 15.064343] PGD 0 <4>[ 15.064345] Oops: 0000 [#1] SMP Fixes: b6d30968d86c45a7bb599eaca13ff048d3fa576c Cc: stable@vger.kernel.org Reported-by: Stephen Chandler Paul Tested-by: Stephen Chandler Paul Signed-off-by: Dmitry Torokhov --- drivers/input/misc/uinput.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c index 345df9b03aed..5adbcedcb81c 100644 --- a/drivers/input/misc/uinput.c +++ b/drivers/input/misc/uinput.c @@ -414,7 +414,7 @@ static int uinput_setup_device(struct uinput_device *udev, dev->id.product = user_dev->id.product; dev->id.version = user_dev->id.version; - for_each_set_bit(i, dev->absbit, ABS_CNT) { + for (i = 0; i < ABS_CNT; i++) { input_abs_set_max(dev, i, user_dev->absmax[i]); input_abs_set_min(dev, i, user_dev->absmin[i]); input_abs_set_fuzz(dev, i, user_dev->absfuzz[i]); -- cgit v1.2.3 From 03a0e8a7c5ea29b5c4e72dfd64900b47a8fb6f2d Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Mon, 14 Sep 2015 10:41:03 +0200 Subject: mtd: nand: sunxi: fix OOB handling in ->write_xxx() functions The USER_DATA register cannot be accessed using byte accessors on A13 SoCs, thus triggering a bug when using memcpy_toio on this register. Declare an helper macros to convert an OOB buffer into a suitable USER_DATA value and vice-versa. This patch also fixes an error in the oob_required logic (some OOB data are not written even if the user required it) by removing the oob_required condition, which is perfectly valid since the core already fill ->oob_poi with FFs when oob_required is false. Signed-off-by: Boris Brezillon Cc: # 3.19+ Fixes: 1fef62c1423b ("mtd: nand: add sunxi NAND flash controller support") Signed-off-by: Brian Norris --- drivers/mtd/nand/sunxi_nand.c | 26 +++++++++----------------- 1 file changed, 9 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c index f97a58d6aae1..279cafd9d7f7 100644 --- a/drivers/mtd/nand/sunxi_nand.c +++ b/drivers/mtd/nand/sunxi_nand.c @@ -147,6 +147,10 @@ #define NFC_ECC_MODE GENMASK(15, 12) #define NFC_RANDOM_SEED GENMASK(30, 16) +/* NFC_USER_DATA helper macros */ +#define NFC_BUF_TO_USER_DATA(buf) ((buf)[0] | ((buf)[1] << 8) | \ + ((buf)[2] << 16) | ((buf)[3] << 24)) + #define NFC_DEFAULT_TIMEOUT_MS 1000 #define NFC_SRAM_SIZE 1024 @@ -646,15 +650,9 @@ static int sunxi_nfc_hw_ecc_write_page(struct mtd_info *mtd, offset = layout->eccpos[i * ecc->bytes] - 4 + mtd->writesize; /* Fill OOB data in */ - if (oob_required) { - tmp = 0xffffffff; - memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, &tmp, - 4); - } else { - memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, - chip->oob_poi + offset - mtd->writesize, - 4); - } + writel(NFC_BUF_TO_USER_DATA(chip->oob_poi + + layout->oobfree[i].offset), + nfc->regs + NFC_REG_USER_DATA_BASE); chip->cmdfunc(mtd, NAND_CMD_RNDIN, offset, -1); @@ -784,14 +782,8 @@ static int sunxi_nfc_hw_syndrome_ecc_write_page(struct mtd_info *mtd, offset += ecc->size; /* Fill OOB data in */ - if (oob_required) { - tmp = 0xffffffff; - memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, &tmp, - 4); - } else { - memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, oob, - 4); - } + writel(NFC_BUF_TO_USER_DATA(oob), + nfc->regs + NFC_REG_USER_DATA_BASE); tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | NFC_ACCESS_DIR | (1 << 30); -- cgit v1.2.3 From 8e375ccda31ccc73b087134e263c48d2114534f4 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Sun, 13 Sep 2015 18:14:43 +0200 Subject: mtd: nand: sunxi: fix sunxi_nand_chips_cleanup() The sunxi_nand_chips_cleanup() function is missing a call to list_del() which generates a double free error. Reported-by: Priit Laes Signed-off-by: Boris Brezillon Cc: # 3.19+ Fixes: 1fef62c1423b ("mtd: nand: add sunxi NAND flash controller support") Tested-by: Priit Laes Signed-off-by: Brian Norris --- drivers/mtd/nand/sunxi_nand.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c index 279cafd9d7f7..e7d333c162be 100644 --- a/drivers/mtd/nand/sunxi_nand.c +++ b/drivers/mtd/nand/sunxi_nand.c @@ -1381,6 +1381,7 @@ static void sunxi_nand_chips_cleanup(struct sunxi_nfc *nfc) node); nand_release(&chip->mtd); sunxi_nand_ecc_cleanup(&chip->nand.ecc); + list_del(&chip->node); } } -- cgit v1.2.3 From 9e294bf88a583825a413df408b9fe9e658fb93ac Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 28 Aug 2015 13:49:35 +0200 Subject: clk: samsung: fix cpu clock's flags checking CLK_CPU_HAS_DIV1 and CLK_CPU_NEEDS_DEBUG_ALT_DIV masks were incorrectly used as a bit numbers. Fix it. Tested on Exynos4210 based Origen board and on Exynos5250 based Arndale board. Cc: Tomasz Figa Cc: Michael Turquette Cc: Thomas Abraham Fixes: ddeac8d96 ("clk: samsung: add infrastructure to register cpu clocks") Reported-by: Dan Carpenter Reviewed-by: Krzysztof Kozlowski Reviewed-by: Javier Martinez Canillas Acked-by: Sylwester Nawrocki Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Stephen Boyd --- drivers/clk/samsung/clk-cpu.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/samsung/clk-cpu.c b/drivers/clk/samsung/clk-cpu.c index 7c1e1f58e2da..2fe37f708dc7 100644 --- a/drivers/clk/samsung/clk-cpu.c +++ b/drivers/clk/samsung/clk-cpu.c @@ -164,7 +164,7 @@ static int exynos_cpuclk_pre_rate_change(struct clk_notifier_data *ndata, * the values for DIV_COPY and DIV_HPM dividers need not be set. */ div0 = cfg_data->div0; - if (test_bit(CLK_CPU_HAS_DIV1, &cpuclk->flags)) { + if (cpuclk->flags & CLK_CPU_HAS_DIV1) { div1 = cfg_data->div1; if (readl(base + E4210_SRC_CPU) & E4210_MUX_HPM_MASK) div1 = readl(base + E4210_DIV_CPU1) & @@ -185,7 +185,7 @@ static int exynos_cpuclk_pre_rate_change(struct clk_notifier_data *ndata, alt_div = DIV_ROUND_UP(alt_prate, tmp_rate) - 1; WARN_ON(alt_div >= MAX_DIV); - if (test_bit(CLK_CPU_NEEDS_DEBUG_ALT_DIV, &cpuclk->flags)) { + if (cpuclk->flags & CLK_CPU_NEEDS_DEBUG_ALT_DIV) { /* * In Exynos4210, ATB clock parent is also mout_core. So * ATB clock also needs to be mantained at safe speed. @@ -206,7 +206,7 @@ static int exynos_cpuclk_pre_rate_change(struct clk_notifier_data *ndata, writel(div0, base + E4210_DIV_CPU0); wait_until_divider_stable(base + E4210_DIV_STAT_CPU0, DIV_MASK_ALL); - if (test_bit(CLK_CPU_HAS_DIV1, &cpuclk->flags)) { + if (cpuclk->flags & CLK_CPU_HAS_DIV1) { writel(div1, base + E4210_DIV_CPU1); wait_until_divider_stable(base + E4210_DIV_STAT_CPU1, DIV_MASK_ALL); @@ -225,7 +225,7 @@ static int exynos_cpuclk_post_rate_change(struct clk_notifier_data *ndata, unsigned long mux_reg; /* find out the divider values to use for clock data */ - if (test_bit(CLK_CPU_NEEDS_DEBUG_ALT_DIV, &cpuclk->flags)) { + if (cpuclk->flags & CLK_CPU_NEEDS_DEBUG_ALT_DIV) { while ((cfg_data->prate * 1000) != ndata->new_rate) { if (cfg_data->prate == 0) return -EINVAL; @@ -240,7 +240,7 @@ static int exynos_cpuclk_post_rate_change(struct clk_notifier_data *ndata, writel(mux_reg & ~(1 << 16), base + E4210_SRC_CPU); wait_until_mux_stable(base + E4210_STAT_CPU, 16, 1); - if (test_bit(CLK_CPU_NEEDS_DEBUG_ALT_DIV, &cpuclk->flags)) { + if (cpuclk->flags & CLK_CPU_NEEDS_DEBUG_ALT_DIV) { div |= (cfg_data->div0 & E4210_DIV0_ATB_MASK); div_mask |= E4210_DIV0_ATB_MASK; } -- cgit v1.2.3 From f929d42ceb18a8acfd47e0e7b7d90b5d49bd9258 Mon Sep 17 00:00:00 2001 From: Roger Pau Monne Date: Fri, 4 Sep 2015 12:08:07 +0200 Subject: xen/blkback: free requests on disconnection MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is due to commit 86839c56dee28c315a4c19b7bfee450ccd84cd25 "xen/block: add multi-page ring support" When using an guest under UEFI - after the domain is destroyed the following warning comes from blkback. ------------[ cut here ]------------ WARNING: CPU: 2 PID: 95 at /home/julien/works/linux/drivers/block/xen-blkback/xenbus.c:274 xen_blkif_deferred_free+0x1f4/0x1f8() Modules linked in: CPU: 2 PID: 95 Comm: kworker/2:1 Tainted: G W 4.2.0 #85 Hardware name: APM X-Gene Mustang board (DT) Workqueue: events xen_blkif_deferred_free Call trace: [] dump_backtrace+0x0/0x124 [] show_stack+0x10/0x1c [] dump_stack+0x78/0x98 [] warn_slowpath_common+0x9c/0xd4 [] warn_slowpath_null+0x14/0x20 [] xen_blkif_deferred_free+0x1f0/0x1f8 [] process_one_work+0x160/0x3b4 [] worker_thread+0x140/0x494 [] kthread+0xd8/0xf0 ---[ end trace 6f859b7883c88cdd ]--- Request allocation has been moved to connect_ring, which is called every time blkback connects to the frontend (this can happen multiple times during a blkback instance life cycle). On the other hand, request freeing has not been moved, so it's only called when destroying the backend instance. Due to this mismatch, blkback can allocate the request pool multiple times, without freeing it. In order to fix it, move the freeing of requests to xen_blkif_disconnect to restore the symmetry between request allocation and freeing. Reported-by: Julien Grall Signed-off-by: Roger Pau Monné Tested-by: Julien Grall Cc: Konrad Rzeszutek Wilk Cc: Boris Ostrovsky Cc: David Vrabel Cc: xen-devel@lists.xenproject.org CC: stable@vger.kernel.org # 4.2 Signed-off-by: Konrad Rzeszutek Wilk --- drivers/block/xen-blkback/xenbus.c | 38 ++++++++++++++++++++------------------ 1 file changed, 20 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c index deb3f001791f..767657565de6 100644 --- a/drivers/block/xen-blkback/xenbus.c +++ b/drivers/block/xen-blkback/xenbus.c @@ -212,6 +212,9 @@ static int xen_blkif_map(struct xen_blkif *blkif, grant_ref_t *gref, static int xen_blkif_disconnect(struct xen_blkif *blkif) { + struct pending_req *req, *n; + int i = 0, j; + if (blkif->xenblkd) { kthread_stop(blkif->xenblkd); wake_up(&blkif->shutdown_wq); @@ -238,13 +241,28 @@ static int xen_blkif_disconnect(struct xen_blkif *blkif) /* Remove all persistent grants and the cache of ballooned pages. */ xen_blkbk_free_caches(blkif); + /* Check that there is no request in use */ + list_for_each_entry_safe(req, n, &blkif->pending_free, free_list) { + list_del(&req->free_list); + + for (j = 0; j < MAX_INDIRECT_SEGMENTS; j++) + kfree(req->segments[j]); + + for (j = 0; j < MAX_INDIRECT_PAGES; j++) + kfree(req->indirect_pages[j]); + + kfree(req); + i++; + } + + WARN_ON(i != (XEN_BLKIF_REQS_PER_PAGE * blkif->nr_ring_pages)); + blkif->nr_ring_pages = 0; + return 0; } static void xen_blkif_free(struct xen_blkif *blkif) { - struct pending_req *req, *n; - int i = 0, j; xen_blkif_disconnect(blkif); xen_vbd_free(&blkif->vbd); @@ -257,22 +275,6 @@ static void xen_blkif_free(struct xen_blkif *blkif) BUG_ON(!list_empty(&blkif->free_pages)); BUG_ON(!RB_EMPTY_ROOT(&blkif->persistent_gnts)); - /* Check that there is no request in use */ - list_for_each_entry_safe(req, n, &blkif->pending_free, free_list) { - list_del(&req->free_list); - - for (j = 0; j < MAX_INDIRECT_SEGMENTS; j++) - kfree(req->segments[j]); - - for (j = 0; j < MAX_INDIRECT_PAGES; j++) - kfree(req->indirect_pages[j]); - - kfree(req); - i++; - } - - WARN_ON(i != (XEN_BLKIF_REQS_PER_PAGE * blkif->nr_ring_pages)); - kmem_cache_free(xen_blkif_cachep, blkif); } -- cgit v1.2.3 From bda4e0fb3126aca15586d165b5a15a37edc0a984 Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Thu, 3 Sep 2015 08:18:17 -0600 Subject: NVMe: Set affinity after allocating request queues MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The asynchronous namespace scanning caused affinity hints to be set before its tagset initialized, so there was no cpu mask to set the hint. This patch moves the affinity hint setting to after namespaces are scanned. Reported-by: 김경산 Signed-off-by: Keith Busch Signed-off-by: Jens Axboe --- drivers/block/nvme-core.c | 36 +++++++++++++++++------------------- 1 file changed, 17 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/block/nvme-core.c b/drivers/block/nvme-core.c index b97fc3fe0916..30758bdf69ea 100644 --- a/drivers/block/nvme-core.c +++ b/drivers/block/nvme-core.c @@ -2439,6 +2439,22 @@ static void nvme_scan_namespaces(struct nvme_dev *dev, unsigned nn) list_sort(NULL, &dev->namespaces, ns_cmp); } +static void nvme_set_irq_hints(struct nvme_dev *dev) +{ + struct nvme_queue *nvmeq; + int i; + + for (i = 0; i < dev->online_queues; i++) { + nvmeq = dev->queues[i]; + + if (!nvmeq->tags || !(*nvmeq->tags)) + continue; + + irq_set_affinity_hint(dev->entry[nvmeq->cq_vector].vector, + blk_mq_tags_cpumask(*nvmeq->tags)); + } +} + static void nvme_dev_scan(struct work_struct *work) { struct nvme_dev *dev = container_of(work, struct nvme_dev, scan_work); @@ -2450,6 +2466,7 @@ static void nvme_dev_scan(struct work_struct *work) return; nvme_scan_namespaces(dev, le32_to_cpup(&ctrl->nn)); kfree(ctrl); + nvme_set_irq_hints(dev); } /* @@ -2953,22 +2970,6 @@ static const struct file_operations nvme_dev_fops = { .compat_ioctl = nvme_dev_ioctl, }; -static void nvme_set_irq_hints(struct nvme_dev *dev) -{ - struct nvme_queue *nvmeq; - int i; - - for (i = 0; i < dev->online_queues; i++) { - nvmeq = dev->queues[i]; - - if (!nvmeq->tags || !(*nvmeq->tags)) - continue; - - irq_set_affinity_hint(dev->entry[nvmeq->cq_vector].vector, - blk_mq_tags_cpumask(*nvmeq->tags)); - } -} - static int nvme_dev_start(struct nvme_dev *dev) { int result; @@ -3010,8 +3011,6 @@ static int nvme_dev_start(struct nvme_dev *dev) if (result) goto free_tags; - nvme_set_irq_hints(dev); - dev->event_limit = 1; return result; @@ -3062,7 +3061,6 @@ static int nvme_dev_resume(struct nvme_dev *dev) } else { nvme_unfreeze_queues(dev); nvme_dev_add(dev); - nvme_set_irq_hints(dev); } return 0; } -- cgit v1.2.3 From e03dc19ba9c7ebc48cedc9cb797fa42dff302565 Mon Sep 17 00:00:00 2001 From: Jason Jin Date: Fri, 14 Aug 2015 13:54:09 +0800 Subject: video: fbdev: fsl: Fix the sleep function for FSL DIU module For deep sleep, the diu module will power off, when wake up from the deep sleep, the registers need to be reinitialized. Signed-off-by: Jason Jin Signed-off-by: Wang Dongsheng Acked-by: Timur Tabi Signed-off-by: Tomi Valkeinen --- drivers/video/fbdev/fsl-diu-fb.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/fbdev/fsl-diu-fb.c b/drivers/video/fbdev/fsl-diu-fb.c index 7fa2e6f9e322..b335c1ae8625 100644 --- a/drivers/video/fbdev/fsl-diu-fb.c +++ b/drivers/video/fbdev/fsl-diu-fb.c @@ -1628,9 +1628,16 @@ static int fsl_diu_suspend(struct platform_device *ofdev, pm_message_t state) static int fsl_diu_resume(struct platform_device *ofdev) { struct fsl_diu_data *data; + unsigned int i; data = dev_get_drvdata(&ofdev->dev); - enable_lcdc(data->fsl_diu_info); + + fsl_diu_enable_interrupts(data); + update_lcdc(data->fsl_diu_info); + for (i = 0; i < NUM_AOIS; i++) { + if (data->mfb[i].count) + fsl_diu_enable_panel(&data->fsl_diu_info[i]); + } return 0; } -- cgit v1.2.3 From 8e9191ac7b29a250b2baab7069ea9cc614c5133c Mon Sep 17 00:00:00 2001 From: Luis de Bethencourt Date: Fri, 18 Sep 2015 20:46:09 +0200 Subject: video: fbdev: mb862xx: Fix module autoload for OF platform driver This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt Signed-off-by: Tomi Valkeinen --- drivers/video/fbdev/mb862xx/mb862xxfbdrv.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/video/fbdev/mb862xx/mb862xxfbdrv.c b/drivers/video/fbdev/mb862xx/mb862xxfbdrv.c index 9b8bebdf8f86..f9ec5c0484fa 100644 --- a/drivers/video/fbdev/mb862xx/mb862xxfbdrv.c +++ b/drivers/video/fbdev/mb862xx/mb862xxfbdrv.c @@ -831,6 +831,7 @@ static struct of_device_id of_platform_mb862xx_tbl[] = { { .compatible = "fujitsu,coral", }, { /* end */ } }; +MODULE_DEVICE_TABLE(of, of_platform_mb862xx_tbl); static struct platform_driver of_platform_mb862xxfb_driver = { .driver = { -- cgit v1.2.3 From 7f2ea957c1152a7b57c22af2ae603bf66965c06e Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Mon, 24 Aug 2015 21:37:25 +0200 Subject: tridentfb: fix hang on Blade3D with CONFIG_CC_OPTIMIZE_FOR_SIZE When the kernel is compiled with -Os (CONFIG_CC_OPTIMIZE_FOR_SIZE), tridentfb hangs the machine upon load with Blade3D cards unless acceleration is disabled. This is caused by memcpy() which copies data byte-by-byte (rep movsb) when compiled with -Os. The card does not like that - it requires 32-bit access. Use iowrite_32() instead. Signed-off-by: Ondrej Zary Acked-by: Krzysztof Helt Signed-off-by: Tomi Valkeinen --- drivers/video/fbdev/tridentfb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/fbdev/tridentfb.c b/drivers/video/fbdev/tridentfb.c index 7ed9a227f5ea..742971304717 100644 --- a/drivers/video/fbdev/tridentfb.c +++ b/drivers/video/fbdev/tridentfb.c @@ -226,7 +226,7 @@ static void blade_image_blit(struct tridentfb_par *par, const char *data, writemmr(par, DST1, point(x, y)); writemmr(par, DST2, point(x + w - 1, y + h - 1)); - memcpy(par->io_virt + 0x10000, data, 4 * size); + iowrite32_rep(par->io_virt + 0x10000, data, size); } static void blade_copy_rect(struct tridentfb_par *par, -- cgit v1.2.3 From 23aa4db78aa7da994ae12d85acf7413ba2517946 Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Mon, 24 Aug 2015 21:37:26 +0200 Subject: tridentfb: Fix set_lwidth on TGUI9440 and CYBER9320 According to X.Org driver, chips older than TGUI9660 have only 1 width bit in AddColReg. Touching the 2nd one causes I2C/DDC to fail on TGUI9440. Set only 1 bit of width in AddColReg on TGUI9440 and CYBER9320. Signed-off-by: Ondrej Zary Signed-off-by: Tomi Valkeinen --- drivers/video/fbdev/tridentfb.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/video/fbdev/tridentfb.c b/drivers/video/fbdev/tridentfb.c index 742971304717..01b43e9ce941 100644 --- a/drivers/video/fbdev/tridentfb.c +++ b/drivers/video/fbdev/tridentfb.c @@ -673,8 +673,14 @@ static int get_nativex(struct tridentfb_par *par) static inline void set_lwidth(struct tridentfb_par *par, int width) { write3X4(par, VGA_CRTC_OFFSET, width & 0xFF); - write3X4(par, AddColReg, - (read3X4(par, AddColReg) & 0xCF) | ((width & 0x300) >> 4)); + /* chips older than TGUI9660 have only 1 width bit in AddColReg */ + /* touching the other one breaks I2C/DDC */ + if (par->chip_id == TGUI9440 || par->chip_id == CYBER9320) + write3X4(par, AddColReg, + (read3X4(par, AddColReg) & 0xEF) | ((width & 0x100) >> 4)); + else + write3X4(par, AddColReg, + (read3X4(par, AddColReg) & 0xCF) | ((width & 0x300) >> 4)); } /* For resolutions smaller than FP resolution stretch */ -- cgit v1.2.3 From ad38cc5f6d4f2c74ed69e2c017691e428549b2bd Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Tue, 15 Sep 2015 16:12:33 +0300 Subject: fbdev: omap2: connector-dvi: use of_get_i2c_adapter_by_node interface This change is needed to properly lock I2C bus driver, which serves DDC. Prior to this change i2c_put_adapter() is misused, which may lead to an overflow over zero of I2C bus driver user counter. Signed-off-by: Vladimir Zapolskiy Signed-off-by: Tomi Valkeinen --- drivers/video/fbdev/omap2/displays-new/connector-dvi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/fbdev/omap2/displays-new/connector-dvi.c b/drivers/video/fbdev/omap2/displays-new/connector-dvi.c index a8ce920fa797..d811e6dcaef7 100644 --- a/drivers/video/fbdev/omap2/displays-new/connector-dvi.c +++ b/drivers/video/fbdev/omap2/displays-new/connector-dvi.c @@ -294,7 +294,7 @@ static int dvic_probe_of(struct platform_device *pdev) adapter_node = of_parse_phandle(node, "ddc-i2c-bus", 0); if (adapter_node) { - adapter = of_find_i2c_adapter_by_node(adapter_node); + adapter = of_get_i2c_adapter_by_node(adapter_node); if (adapter == NULL) { dev_err(&pdev->dev, "failed to parse ddc-i2c-bus\n"); omap_dss_put_device(ddata->in); -- cgit v1.2.3 From 4bdb4629867babb7a3d93548aa69a4ef07fc36c0 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Wed, 16 Sep 2015 11:12:34 +0200 Subject: OMAPDSS: panel-sony-acx565akm: Export OF module alias information Drivers needs to export the OF id table and this be built into the module or udev won't have the necessary information to autoload the driver module when the device is registered via OF. Signed-off-by: Javier Martinez Canillas Signed-off-by: Tomi Valkeinen --- drivers/video/fbdev/omap2/displays-new/panel-sony-acx565akm.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/video/fbdev/omap2/displays-new/panel-sony-acx565akm.c b/drivers/video/fbdev/omap2/displays-new/panel-sony-acx565akm.c index 90cbc4c3406c..c581231c74a5 100644 --- a/drivers/video/fbdev/omap2/displays-new/panel-sony-acx565akm.c +++ b/drivers/video/fbdev/omap2/displays-new/panel-sony-acx565akm.c @@ -898,6 +898,7 @@ static const struct of_device_id acx565akm_of_match[] = { { .compatible = "omapdss,sony,acx565akm", }, {}, }; +MODULE_DEVICE_TABLE(of, acx565akm_of_match); static struct spi_driver acx565akm_driver = { .driver = { -- cgit v1.2.3 From 680168a58a9315e1301f4ebb062244470d4919b0 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Tue, 22 Sep 2015 09:35:31 -0700 Subject: PM / OPP: of_property_count_u32_elems() can return errors of_property_count_u32_elems() will never return 0, but a -ve error value of a positive count. And so the current !count check is wrong. Also, a missing "opp-microvolt" property isn't a problem and so we need to do of_find_property() separately to confirm that. Fixes: 274659029c9d (PM / OPP: Add support to parse "operating-points-v2" bindings) Signed-off-by: Viresh Kumar Reviewed-by: Stephen Boyd Signed-off-by: Rafael J. Wysocki --- drivers/base/power/opp.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index 28cd75c535b0..1194669c2bb5 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -892,10 +892,17 @@ static int opp_get_microvolt(struct dev_pm_opp *opp, struct device *dev) u32 microvolt[3] = {0}; int count, ret; - count = of_property_count_u32_elems(opp->np, "opp-microvolt"); - if (!count) + /* Missing property isn't a problem, but an invalid entry is */ + if (!of_find_property(opp->np, "opp-microvolt", NULL)) return 0; + count = of_property_count_u32_elems(opp->np, "opp-microvolt"); + if (count < 0) { + dev_err(dev, "%s: Invalid opp-microvolt property (%d)\n", + __func__, count); + return count; + } + /* There can be one or three elements here */ if (count != 1 && count != 3) { dev_err(dev, "%s: Invalid number of elements in opp-microvolt property (%d)\n", -- cgit v1.2.3 From a8360062ccfb4b891d3013d0e55826c8bcb02bfb Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 18 Sep 2015 03:08:40 +0200 Subject: PCI / PM: Update runtime PM documentation for PCI devices Section 3.2 "Device Runtime Power Management" of pci.txt has become outdated, so update it to correctly reflect the current code flow. Also update the comment in local_pci_probe() to document the fact that pm_runtime_put_noidle() is not the only runtime PM helper function that can be used to decrement the device's runtime PM usage counter in .probe(). Signed-off-by: Rafael J. Wysocki Acked-by: Alan Stern --- drivers/pci/pci-driver.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index dd652f2ae03d..108a3118ace7 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -299,9 +299,10 @@ static long local_pci_probe(void *_ddi) * Unbound PCI devices are always put in D0, regardless of * runtime PM status. During probe, the device is set to * active and the usage count is incremented. If the driver - * supports runtime PM, it should call pm_runtime_put_noidle() - * in its probe routine and pm_runtime_get_noresume() in its - * remove routine. + * supports runtime PM, it should call pm_runtime_put_noidle(), + * or any other runtime PM helper function decrementing the usage + * count, in its probe routine and pm_runtime_get_noresume() in + * its remove routine. */ pm_runtime_get_sync(dev); pci_dev->driver = pci_drv; -- cgit v1.2.3 From aebf5a67db8dbacbc624b9c652b81f5460b15eff Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Mon, 21 Sep 2015 11:06:32 +0200 Subject: dmaengine: pxa_dma: fix initial list move Since the commit to have an allocated list of virtual descriptors was reverted, the pxa_dma driver is broken, as it assumes the descriptor is placed on the a