From 6efaaf33bece53a842cb1cc71971a05216d81473 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 1 Sep 2014 10:03:21 +0300 Subject: iwlwifi: mvm: enable scheduled scan on newest firmware Scheduled scan was disabled because of a bug in the firmware. The firmware reported support for this feature, but enabling it led to assertions. The bugs have been fixes in latest firmware versions, so that we can re-enable the feature on latest firmwares only. Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 7c8796584c25..c4000a1ea81a 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -396,12 +396,14 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) else hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; - /* TODO: enable that only for firmwares that don't crash */ - /* hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN; */ - hw->wiphy->max_sched_scan_ssids = PROBE_OPTION_MAX; - hw->wiphy->max_match_sets = IWL_SCAN_MAX_PROFILES; - /* we create the 802.11 header and zero length SSID IE. */ - hw->wiphy->max_sched_scan_ie_len = SCAN_OFFLOAD_PROBE_REQ_SIZE - 24 - 2; + if (IWL_UCODE_API(mvm->fw->ucode_ver) >= 10) { + hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN; + hw->wiphy->max_sched_scan_ssids = PROBE_OPTION_MAX; + hw->wiphy->max_match_sets = IWL_SCAN_MAX_PROFILES; + /* we create the 802.11 header and zero length SSID IE. */ + hw->wiphy->max_sched_scan_ie_len = + SCAN_OFFLOAD_PROBE_REQ_SIZE - 24 - 2; + } hw->wiphy->features |= NL80211_FEATURE_P2P_GO_CTWIN | NL80211_FEATURE_LOW_PRIORITY_SCAN | -- cgit v1.2.3 From 787d6c1f17eae41429d35eb0f1b38f44659f5f1d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 25 Jul 2014 14:49:59 +0200 Subject: iwlwifi: mvm: BT Coex - remove shadowing variable The variable 'u32 mode' exists twice, the latter shadowing the former - remove the latter since there's no need for two variables. Signed-off-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/coex.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/coex.c b/drivers/net/wireless/iwlwifi/mvm/coex.c index 2291bbcaaeab..75178f35f042 100644 --- a/drivers/net/wireless/iwlwifi/mvm/coex.c +++ b/drivers/net/wireless/iwlwifi/mvm/coex.c @@ -585,8 +585,6 @@ int iwl_send_bt_init_conf(struct iwl_mvm *mvm) lockdep_assert_held(&mvm->mutex); if (unlikely(mvm->bt_force_ant_mode != BT_FORCE_ANT_DIS)) { - u32 mode; - switch (mvm->bt_force_ant_mode) { case BT_FORCE_ANT_BT: mode = BT_COEX_BT; -- cgit v1.2.3 From 7c8b3bc688bdcfd7789efbd17da4d85b104ad351 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Wed, 30 Jul 2014 15:04:08 +0300 Subject: iwlwifi: mvm: set MAC_FILTER_IN_BEACON correctly for STA/P2P client In commit cad3f08c (iwlwifi: mvm: enable MAC_FILTER_IN_BEACON when forced_assoc_off is set) the code to set the MAC_FILTER_IN_BEACON flag was accidentally moved to the main block of the if statement, while it should be in the else block instead. Move it to the right place. Fixes: cad3f08c23de ("iwlwifi: mvm: enable MAC_FILTER_IN_BEACON when forced_assoc_off is set") Reviewed-by: Johannes Berg Signed-off-by: Luciano Coelho Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c index 0e523e28cabf..8242e689ddb1 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c @@ -721,11 +721,6 @@ static int iwl_mvm_mac_ctxt_cmd_sta(struct iwl_mvm *mvm, !force_assoc_off) { u32 dtim_offs; - /* Allow beacons to pass through as long as we are not - * associated, or we do not have dtim period information. - */ - cmd.filter_flags |= cpu_to_le32(MAC_FILTER_IN_BEACON); - /* * The DTIM count counts down, so when it is N that means N * more beacon intervals happen until the DTIM TBTT. Therefore @@ -759,6 +754,11 @@ static int iwl_mvm_mac_ctxt_cmd_sta(struct iwl_mvm *mvm, ctxt_sta->is_assoc = cpu_to_le32(1); } else { ctxt_sta->is_assoc = cpu_to_le32(0); + + /* Allow beacons to pass through as long as we are not + * associated, or we do not have dtim period information. + */ + cmd.filter_flags |= cpu_to_le32(MAC_FILTER_IN_BEACON); } ctxt_sta->bi = cpu_to_le32(vif->bss_conf.beacon_int); -- cgit v1.2.3 From 86974bff066dd8b98be46d7c7d3aba89034f0833 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 31 Jul 2014 14:32:37 +0300 Subject: iwlwifi: mvm: fix endianity issues with Smart Fifo commands This code was broken on big endian systems. Sparse didn't catch the bug since the firmware command was not tagged as little endian. Fix the bug for big endian systems and tag the field in the firmware command to prevent such issues in the future. Cc: stable@vger.kernel.org [3.14+] Fixes: 1f3b0ff8ec ("iwlwifi: mvm: Add Smart FIFO support") Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/fw-api.h | 4 ++-- drivers/net/wireless/iwlwifi/mvm/sf.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h index 95f5b3274efb..9a922f3bd16b 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h @@ -1563,14 +1563,14 @@ enum iwl_sf_scenario { /** * Smart Fifo configuration command. - * @state: smart fifo state, types listed in iwl_sf_sate. + * @state: smart fifo state, types listed in enum %iwl_sf_sate. * @watermark: Minimum allowed availabe free space in RXF for transient state. * @long_delay_timeouts: aging and idle timer values for each scenario * in long delay state. * @full_on_timeouts: timer values for each scenario in full on state. */ struct iwl_sf_cfg_cmd { - enum iwl_sf_state state; + __le32 state; __le32 watermark[SF_TRANSIENT_STATES_NUMBER]; __le32 long_delay_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES]; __le32 full_on_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES]; diff --git a/drivers/net/wireless/iwlwifi/mvm/sf.c b/drivers/net/wireless/iwlwifi/mvm/sf.c index 7edfd15efc9d..e843b67f2201 100644 --- a/drivers/net/wireless/iwlwifi/mvm/sf.c +++ b/drivers/net/wireless/iwlwifi/mvm/sf.c @@ -172,7 +172,7 @@ static int iwl_mvm_sf_config(struct iwl_mvm *mvm, u8 sta_id, enum iwl_sf_state new_state) { struct iwl_sf_cfg_cmd sf_cmd = { - .state = new_state, + .state = cpu_to_le32(new_state), }; struct ieee80211_sta *sta; int ret = 0; -- cgit v1.2.3 From 22d059a5c7c5de61e53c88e30b65e55fbfd91e91 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Tue, 26 Aug 2014 11:23:11 +0300 Subject: iwlwifi: increase DEFAULT_MAX_TX_POWER The chip is able to transmit up to 22dBm, so set the constant appropriately. CC: [3.13+] Signed-off-by: Eliad Peller Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/iwl-config.h | 2 ++ drivers/net/wireless/iwlwifi/iwl-nvm-parse.c | 4 +--- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-config.h b/drivers/net/wireless/iwlwifi/iwl-config.h index 8da596db9abe..942c99bc403d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-config.h +++ b/drivers/net/wireless/iwlwifi/iwl-config.h @@ -120,6 +120,8 @@ enum iwl_led_mode { #define IWL_LONG_WD_TIMEOUT 10000 #define IWL_MAX_WD_TIMEOUT 120000 +#define IWL_DEFAULT_MAX_TX_POWER 22 + /* Antenna presence definitions */ #define ANT_NONE 0x0 #define ANT_A BIT(0) diff --git a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c index 018af2957d3b..354255f08754 100644 --- a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c +++ b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c @@ -146,8 +146,6 @@ static const u8 iwl_nvm_channels_family_8000[] = { #define LAST_2GHZ_HT_PLUS 9 #define LAST_5GHZ_HT 161 -#define DEFAULT_MAX_TX_POWER 16 - /* rate data (static) */ static struct ieee80211_rate iwl_cfg80211_rates[] = { { .bitrate = 1 * 10, .hw_value = 0, .hw_value_short = 0, }, @@ -295,7 +293,7 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg, * Default value - highest tx power value. max_power * is not used in mvm, and is used for backwards compatibility */ - channel->max_power = DEFAULT_MAX_TX_POWER; + channel->max_power = IWL_DEFAULT_MAX_TX_POWER; is_5ghz = channel->band == IEEE80211_BAND_5GHZ; IWL_DEBUG_EEPROM(dev, "Ch. %d [%sGHz] %s%s%s%s%s%s%s(0x%02x %ddBm): Ad-Hoc %ssupported\n", -- cgit v1.2.3 From 1bc10d3b509cf9f55a516c1e6dd0716f5e8fefd7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 26 Aug 2014 14:25:46 +0200 Subject: iwlwifi: mvm: correctly handle PM/QoS changes from mac80211 When mac80211 requests multiple BSS config changes, as for example while associating, we ignore power management and QoS changes and only apply them later. Fix that by removing the "else" and making the conditions independent. Also move it after (potential) beacon filter enablement to have that already enabled when going into power management code. Signed-off-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index c4000a1ea81a..cdc272d776e7 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -1526,11 +1526,6 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm, */ iwl_mvm_remove_time_event(mvm, mvmvif, &mvmvif->time_event_data); - } else if (changes & (BSS_CHANGED_PS | BSS_CHANGED_P2P_PS | - BSS_CHANGED_QOS)) { - ret = iwl_mvm_power_update_mac(mvm); - if (ret) - IWL_ERR(mvm, "failed to update power mode\n"); } if (changes & BSS_CHANGED_BEACON_INFO) { @@ -1538,6 +1533,12 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm, WARN_ON(iwl_mvm_enable_beacon_filter(mvm, vif, 0)); } + if (changes & (BSS_CHANGED_PS | BSS_CHANGED_P2P_PS | BSS_CHANGED_QOS)) { + ret = iwl_mvm_power_update_mac(mvm); + if (ret) + IWL_ERR(mvm, "failed to update power mode\n"); + } + if (changes & BSS_CHANGED_TXPOWER) { IWL_DEBUG_CALIB(mvm, "Changing TX Power to %d\n", bss_conf->txpower); -- cgit v1.2.3 From aa11bbf3df026d6b1c6b528bef634fd9de7c2619 Mon Sep 17 00:00:00 2001 From: Eyal Shapira Date: Tue, 2 Sep 2014 18:39:21 +0300 Subject: iwlwifi: mvm: treat EAPOLs like mgmt frames wrt rate Using the LQ table which is initially set according to the rssi could lead to EAPOLs being sent in high legacy rates like 54mbps. It's better to avoid sending EAPOLs in high rates as it reduces the chances of a successful 4-Way handshake. Avoid this and treat them like other mgmt frames which would initially get sent at the basic rate. Cc: [3.13+] Signed-off-by: Eyal Shapira Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/tx.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c index dbc870713882..9ee410bf6da2 100644 --- a/drivers/net/wireless/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/iwlwifi/mvm/tx.c @@ -168,10 +168,14 @@ static void iwl_mvm_set_tx_cmd_rate(struct iwl_mvm *mvm, /* * for data packets, rate info comes from the table inside the fw. This - * table is controlled by LINK_QUALITY commands + * table is controlled by LINK_QUALITY commands. Exclude ctrl port + * frames like EAPOLs which should be treated as mgmt frames. This + * avoids them being sent initially in high rates which increases the + * chances for completion of the 4-Way handshake. */ - if (ieee80211_is_data(fc) && sta) { + if (ieee80211_is_data(fc) && sta && + !(info->control.flags & IEEE80211_TX_CTRL_PORT_CTRL_PROTO)) { tx_cmd->initial_rate_index = 0; tx_cmd->tx_flags |= cpu_to_le32(TX_CMD_FLG_STA_RATE); return; -- cgit v1.2.3 From 717e2390dc72e87380d6ccf62134b0ab84ee43d2 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 31 Jul 2014 14:39:40 +0300 Subject: iwlwiwi: mvm: use bss_conf->dtim_period instead of conf.ps_dtim_period The latter is meant for software implementation of power save and is not per-virtual interface. Since our driver supports multiple virtual interfaces, we need to use vif->bss_conf.dtim_period. Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c | 3 +-- drivers/net/wireless/iwlwifi/mvm/power.c | 5 ++--- 2 files changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c b/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c index 2e90ff795c13..87e517bffedc 100644 --- a/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c +++ b/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c @@ -74,8 +74,7 @@ static void iwl_dbgfs_update_pm(struct iwl_mvm *mvm, switch (param) { case MVM_DEBUGFS_PM_KEEP_ALIVE: { - struct ieee80211_hw *hw = mvm->hw; - int dtimper = hw->conf.ps_dtim_period ?: 1; + int dtimper = vif->bss_conf.dtim_period ?: 1; int dtimper_msec = dtimper * vif->bss_conf.beacon_int; IWL_DEBUG_POWER(mvm, "debugfs: set keep_alive= %d sec\n", val); diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c index 2b2d10800a55..d9769a23c68b 100644 --- a/drivers/net/wireless/iwlwifi/mvm/power.c +++ b/drivers/net/wireless/iwlwifi/mvm/power.c @@ -281,7 +281,6 @@ static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct iwl_mac_power_cmd *cmd) { - struct ieee80211_hw *hw = mvm->hw; struct ieee80211_chanctx_conf *chanctx_conf; struct ieee80211_channel *chan; int dtimper, dtimper_msec; @@ -292,7 +291,7 @@ static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm, cmd->id_and_color = cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->id, mvmvif->color)); - dtimper = hw->conf.ps_dtim_period ?: 1; + dtimper = vif->bss_conf.dtim_period; /* * Regardless of power management state the driver must set @@ -885,7 +884,7 @@ int iwl_mvm_update_d0i3_power_mode(struct iwl_mvm *mvm, iwl_mvm_power_build_cmd(mvm, vif, &cmd); if (enable) { /* configure skip over dtim up to 300 msec */ - int dtimper = mvm->hw->conf.ps_dtim_period ?: 1; + int dtimper = vif->bss_conf.dtim_period ?: 1; int dtimper_msec = dtimper * vif->bss_conf.beacon_int; if (WARN_ON(!dtimper_msec)) -- cgit v1.2.3 From 582de30afa13dbc20c8b654ac8f93d32dbef99ce Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 21 Aug 2014 19:08:44 +0200 Subject: iwlwifi: mvm: BT Coex - always initialize smps_mode smps_mode is used uninitialized in a debug statement in AP mode, so always initialize it. While at it, fix a typo. Signed-off-by: Johannes Berg Reviewed-by: Luciano Coelho Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/coex.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/coex.c b/drivers/net/wireless/iwlwifi/mvm/coex.c index 75178f35f042..ce71625f497f 100644 --- a/drivers/net/wireless/iwlwifi/mvm/coex.c +++ b/drivers/net/wireless/iwlwifi/mvm/coex.c @@ -754,7 +754,8 @@ static void iwl_mvm_bt_notif_iterator(void *_data, u8 *mac, struct iwl_bt_iterator_data *data = _data; struct iwl_mvm *mvm = data->mvm; struct ieee80211_chanctx_conf *chanctx_conf; - enum ieee80211_smps_mode smps_mode; + /* default smps_mode is AUTOMATIC - only used for client modes */ + enum ieee80211_smps_mode smps_mode = IEEE80211_SMPS_AUTOMATIC; u32 bt_activity_grading; int ave_rssi; @@ -762,8 +763,6 @@ static void iwl_mvm_bt_notif_iterator(void *_data, u8 *mac, switch (vif->type) { case NL80211_IFTYPE_STATION: - /* default smps_mode for BSS / P2P client is AUTOMATIC */ - smps_mode = IEEE80211_SMPS_AUTOMATIC; break; case NL80211_IFTYPE_AP: if (!mvmvif->ap_ibss_active) @@ -795,7 +794,7 @@ static void iwl_mvm_bt_notif_iterator(void *_data, u8 *mac, else if (bt_activity_grading >= BT_LOW_TRAFFIC) smps_mode = IEEE80211_SMPS_DYNAMIC; - /* relax SMPS contraints for next association */ + /* relax SMPS constraints for next association */ if (!vif->bss_conf.assoc) smps_mode = IEEE80211_SMPS_AUTOMATIC; -- cgit v1.2.3 From f8dfc607b2b460e8e8adfdfb3c5f5bba3a4ad01b Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 7 Sep 2014 21:33:53 +0300 Subject: iwlwifi: dvm: disable power save by default In https://bugzilla.kernel.org/show_bug.cgi?id=84031, the submitter said that disabling power saving helped, do just that. Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/dvm/power.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/dvm/power.c b/drivers/net/wireless/iwlwifi/dvm/power.c index 760c45c34ef3..1513dbc79c14 100644 --- a/drivers/net/wireless/iwlwifi/dvm/power.c +++ b/drivers/net/wireless/iwlwifi/dvm/power.c @@ -40,7 +40,7 @@ #include "commands.h" #include "power.h" -static bool force_cam; +static bool force_cam = true; module_param(force_cam, bool, 0644); MODULE_PARM_DESC(force_cam, "force continuously aware mode (no power saving at all)"); -- cgit v1.2.3 From 498abba6a0b2bc7ed0b57772d664a549dcabc4d7 Mon Sep 17 00:00:00 2001 From: Oren Givon Date: Mon, 8 Sep 2014 08:57:05 +0300 Subject: iwlwifi: add PCI IDs and add then new 3165 series This change does the following: 1) Add a new 7265 series PCI ID 2) Add two new 3160 series PCI IDs 3) Add the new 3165 series PCI IDs and configurations Signed-off-by: Oren Givon Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/iwl-7000.c | 16 ++++++++++++++++ drivers/net/wireless/iwlwifi/iwl-config.h | 1 + drivers/net/wireless/iwlwifi/pcie/drv.c | 7 +++++++ 3 files changed, 24 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-7000.c b/drivers/net/wireless/iwlwifi/iwl-7000.c index d67a37a786aa..d53adc245497 100644 --- a/drivers/net/wireless/iwlwifi/iwl-7000.c +++ b/drivers/net/wireless/iwlwifi/iwl-7000.c @@ -83,6 +83,8 @@ #define IWL7260_TX_POWER_VERSION 0xffff /* meaningless */ #define IWL3160_NVM_VERSION 0x709 #define IWL3160_TX_POWER_VERSION 0xffff /* meaningless */ +#define IWL3165_NVM_VERSION 0x709 +#define IWL3165_TX_POWER_VERSION 0xffff /* meaningless */ #define IWL7265_NVM_VERSION 0x0a1d #define IWL7265_TX_POWER_VERSION 0xffff /* meaningless */ @@ -92,6 +94,9 @@ #define IWL3160_FW_PRE "iwlwifi-3160-" #define IWL3160_MODULE_FIRMWARE(api) IWL3160_FW_PRE __stringify(api) ".ucode" +#define IWL3165_FW_PRE "iwlwifi-3165-" +#define IWL3165_MODULE_FIRMWARE(api) IWL3165_FW_PRE __stringify(api) ".ucode" + #define IWL7265_FW_PRE "iwlwifi-7265-" #define IWL7265_MODULE_FIRMWARE(api) IWL7265_FW_PRE __stringify(api) ".ucode" @@ -213,6 +218,16 @@ static const struct iwl_pwr_tx_backoff iwl7265_pwr_tx_backoffs[] = { {0}, }; +const struct iwl_cfg iwl3165_2ac_cfg = { + .name = "Intel(R) Dual Band Wireless AC 3165", + .fw_name_pre = IWL3165_FW_PRE, + IWL_DEVICE_7000, + .ht_params = &iwl7000_ht_params, + .nvm_ver = IWL3165_NVM_VERSION, + .nvm_calib_ver = IWL3165_TX_POWER_VERSION, + .pwr_tx_backoffs = iwl7265_pwr_tx_backoffs, +}; + const struct iwl_cfg iwl7265_2ac_cfg = { .name = "Intel(R) Dual Band Wireless AC 7265", .fw_name_pre = IWL7265_FW_PRE, @@ -245,4 +260,5 @@ const struct iwl_cfg iwl7265_n_cfg = { MODULE_FIRMWARE(IWL7260_MODULE_FIRMWARE(IWL7260_UCODE_API_OK)); MODULE_FIRMWARE(IWL3160_MODULE_FIRMWARE(IWL3160_UCODE_API_OK)); +MODULE_FIRMWARE(IWL3165_MODULE_FIRMWARE(IWL3160_UCODE_API_OK)); MODULE_FIRMWARE(IWL7265_MODULE_FIRMWARE(IWL7260_UCODE_API_OK)); diff --git a/drivers/net/wireless/iwlwifi/iwl-config.h b/drivers/net/wireless/iwlwifi/iwl-config.h index 942c99bc403d..3d7cc37420ae 100644 --- a/drivers/net/wireless/iwlwifi/iwl-config.h +++ b/drivers/net/wireless/iwlwifi/iwl-config.h @@ -337,6 +337,7 @@ extern const struct iwl_cfg iwl7260_n_cfg; extern const struct iwl_cfg iwl3160_2ac_cfg; extern const struct iwl_cfg iwl3160_2n_cfg; extern const struct iwl_cfg iwl3160_n_cfg; +extern const struct iwl_cfg iwl3165_2ac_cfg; extern const struct iwl_cfg iwl7265_2ac_cfg; extern const struct iwl_cfg iwl7265_2n_cfg; extern const struct iwl_cfg iwl7265_n_cfg; diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c index 98950e45c7b0..8bb8305fc2ce 100644 --- a/drivers/net/wireless/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/iwlwifi/pcie/drv.c @@ -352,11 +352,17 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = { {IWL_PCI_DEVICE(0x08B3, 0x8060, iwl3160_2n_cfg)}, {IWL_PCI_DEVICE(0x08B3, 0x8062, iwl3160_n_cfg)}, {IWL_PCI_DEVICE(0x08B4, 0x8270, iwl3160_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B4, 0x8370, iwl3160_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B4, 0x8272, iwl3160_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B3, 0x8470, iwl3160_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B3, 0x8570, iwl3160_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B3, 0x1070, iwl3160_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B3, 0x1170, iwl3160_2ac_cfg)}, +/* 3165 Series */ + {IWL_PCI_DEVICE(0x3165, 0x4010, iwl3165_2ac_cfg)}, + {IWL_PCI_DEVICE(0x3165, 0x4210, iwl3165_2ac_cfg)}, + /* 7265 Series */ {IWL_PCI_DEVICE(0x095A, 0x5010, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x5110, iwl7265_2ac_cfg)}, @@ -378,6 +384,7 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = { {IWL_PCI_DEVICE(0x095B, 0x5202, iwl7265_n_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x9010, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x9012, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x900A, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x9110, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x9112, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x9210, iwl7265_2ac_cfg)}, -- cgit v1.2.3 From 2cddddc56a1179aa71b460ad616176c237d4a243 Mon Sep 17 00:00:00 2001 From: Eyal Shapira Date: Wed, 13 Aug 2014 00:26:17 +0300 Subject: iwlwifi: mvm: fix an overflow in iwl_mvm_get_signal_strength The idea here is to translate a value of 0 received from the firmware to the lowest rssi figure. As rx_status->chain_signal is a signed byte the lowest possible value is -128 and not -256. -256 was causing 0 to get stored in the signed byte. Signed-off-by: Eyal Shapira Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/rx.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/rx.c b/drivers/net/wireless/iwlwifi/mvm/rx.c index 4b98987fc413..bf5cd8c8b0f7 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rx.c +++ b/drivers/net/wireless/iwlwifi/mvm/rx.c @@ -149,13 +149,13 @@ static void iwl_mvm_get_signal_strength(struct iwl_mvm *mvm, le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_ENERGY_ANT_ABC_IDX]); energy_a = (val & IWL_RX_INFO_ENERGY_ANT_A_MSK) >> IWL_RX_INFO_ENERGY_ANT_A_POS; - energy_a = energy_a ? -energy_a : -256; + energy_a = energy_a ? -energy_a : S8_MIN; energy_b = (val & IWL_RX_INFO_ENERGY_ANT_B_MSK) >> IWL_RX_INFO_ENERGY_ANT_B_POS; - energy_b = energy_b ? -energy_b : -256; + energy_b = energy_b ? -energy_b : S8_MIN; energy_c = (val & IWL_RX_INFO_ENERGY_ANT_C_MSK) >> IWL_RX_INFO_ENERGY_ANT_C_POS; - energy_c = energy_c ? -energy_c : -256; + energy_c = energy_c ? -energy_c : S8_MIN; max_energy = max(energy_a, energy_b); max_energy = max(max_energy, energy_c); -- cgit v1.2.3 From 78dcff7b73ad1c9052f0b5999f9aaab7648ba2ef Mon Sep 17 00:00:00 2001 From: David L Stevens Date: Mon, 8 Sep 2014 16:23:01 -0400 Subject: sunvnet - add missing rmb() for sunvnet driver The sunvnet driver does not have an rmb() in the ring consumer corresponding to the wmb() in the producer. According to Documentation/memory-barriers.txt: "When dealing with CPU-CPU interactions, certain types of memory barrier should always be paired. A lack of appropriate pairing is almost certainly an error." In cases where an rmb() is not a no-op and a consumer is removing data from the ring while a producer is adding new entries, a load reorder would allow CPU1 CPU2 ---- ---- LOAD desc.size [e.g] STORE desc.size set desc.hdr.state = VIO_DESC_READY LOAD desc.hdr.state [because VIO_DESC_READY, use old desc.size, already loaded out of order] [CPU2 has reordered apparently unrelated LOADs] To ensure other desc fields are not loaded before checking VIO_DESC_READY, we need an rmb() between the check and desc data accesses. I've also moved the viodbg() call to after the rmb() so that it, too, has current descriptor data even with reordering, which has the side effect that it won't print anything for descriptors that are not VIO_DESC_READY as before. That's a) probably a good thing, since the fields are not necessarily set and, b) better than adding another rmb() just for viodbg(). This would not be possible if strict-ordering is enforced, but then the memory barriers should be no-ops in that case. Signed-off-by: David L Stevens Signed-off-by: David S. Miller --- drivers/net/ethernet/sun/sunvnet.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/sun/sunvnet.c b/drivers/net/ethernet/sun/sunvnet.c index 23c89ab5a6ad..f67539650c38 100644 --- a/drivers/net/ethernet/sun/sunvnet.c +++ b/drivers/net/ethernet/sun/sunvnet.c @@ -350,14 +350,17 @@ static int vnet_walk_rx_one(struct vnet_port *port, if (IS_ERR(desc)) return PTR_ERR(desc); + if (desc->hdr.state != VIO_DESC_READY) + return 1; + + rmb(); + viodbg(DATA, "vio_walk_rx_one desc[%02x:%02x:%08x:%08x:%llx:%llx]\n", desc->hdr.state, desc->hdr.ack, desc->size, desc->ncookies, desc->cookies[0].cookie_addr, desc->cookies[0].cookie_size); - if (desc->hdr.state != VIO_DESC_READY) - return 1; err = vnet_rx_one(port, desc->size, desc->cookies, desc->ncookies); if (err == -ECONNRESET) return err; -- cgit v1.2.3 From 208f7ca4d4a6886256763c9c073775c5fdaf47eb Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Mon, 8 Sep 2014 18:01:53 +0300 Subject: drivers: net: ethernet: octeon_mgmt: fix a compiler warning Fix the following compiler warning: drivers/net/ethernet/octeon/octeon_mgmt.c: In function 'octeon_mgmt_clean_tx_buffers': drivers/net/ethernet/octeon/octeon_mgmt.c:295:4: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] u64 ns = cvmx_read_csr(CVMX_MIXX_TSTAMP(p->port)); ^ Signed-off-by: Aaro Koskinen Acked-by: David Daney Signed-off-by: David S. Miller --- drivers/net/ethernet/octeon/octeon_mgmt.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/octeon/octeon_mgmt.c b/drivers/net/ethernet/octeon/octeon_mgmt.c index 979c6980639f..a42293092ea4 100644 --- a/drivers/net/ethernet/octeon/octeon_mgmt.c +++ b/drivers/net/ethernet/octeon/octeon_mgmt.c @@ -290,9 +290,11 @@ static void octeon_mgmt_clean_tx_buffers(struct octeon_mgmt *p) /* Read the hardware TX timestamp if one was recorded */ if (unlikely(re.s.tstamp)) { struct skb_shared_hwtstamps ts; + u64 ns; + memset(&ts, 0, sizeof(ts)); /* Read the timestamp */ - u64 ns = cvmx_read_csr(CVMX_MIXX_TSTAMP(p->port)); + ns = cvmx_read_csr(CVMX_MIXX_TSTAMP(p->port)); /* Remove the timestamp from the FIFO */ cvmx_write_csr(CVMX_MIXX_TSCTL(p->port), 0); /* Tell the kernel about the timestamp */ -- cgit v1.2.3 From 278d436a476f69fc95d5c82bf61b6c2d02f4d44e Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Mon, 8 Sep 2014 18:46:53 +0200 Subject: net/mlx4_en: do not ignore autoneg in mlx4_en_set_pauseparam() The driver does not support pause autonegotiation so it should return -EINVAL when the function is called with non-zero autoneg. Cc: Amir Vadai Signed-off-by: Ivan Vecera Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c index e22f24f784fc..35ff2925110a 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c @@ -487,6 +487,9 @@ static int mlx4_en_set_pauseparam(struct net_device *dev, struct mlx4_en_dev *mdev = priv->mdev; int err; + if (pause->autoneg) + return -EINVAL; + priv->prof->tx_pause = pause->tx_pause != 0; priv->prof->rx_pause = pause->rx_pause != 0; err = mlx4_SET_PORT_general(mdev->dev, priv->port, -- cgit v1.2.3 From fe24ba082b8483c81f546d24e40a55624295b85d Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 8 Sep 2014 11:37:51 -0700 Subject: net: systemport: check harder for out of memory conditions There is a potential case where we might be failing to refill a control block, leaving it with both a NULL skb pointer *and* a NULL dma_unmap_addr. The way we process incoming packets, by first calling dma_unmap_single(), and then only checking for a potential NULL skb can lead to situations where do pass a NULL dma_unmap_addr() to dma_unmap_single(), resulting in an oops. Fix this my moving the NULL skb check earlier, since no backing skb also means no corresponding DMA mapping for this packet. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bcmsysport.c | 31 ++++++++++++++++++------------ 1 file changed, 19 insertions(+), 12 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c index 6f4e18644bd4..d9b9170ed2fc 100644 --- a/drivers/net/ethernet/broadcom/bcmsysport.c +++ b/drivers/net/ethernet/broadcom/bcmsysport.c @@ -534,6 +534,25 @@ static unsigned int bcm_sysport_desc_rx(struct bcm_sysport_priv *priv, while ((processed < to_process) && (processed < budget)) { cb = &priv->rx_cbs[priv->rx_read_ptr]; skb = cb->skb; + + processed++; + priv->rx_read_ptr++; + + if (priv->rx_read_ptr == priv->num_rx_bds) + priv->rx_read_ptr = 0; + + /* We do not have a backing SKB, so we do not a corresponding + * DMA mapping for this incoming packet since + * bcm_sysport_rx_refill always either has both skb and mapping + * or none. + */ + if (unlikely(!skb)) { + netif_err(priv, rx_err, ndev, "out of memory!\n"); + ndev->stats.rx_dropped++; + ndev->stats.rx_errors++; + goto refill; + } + dma_unmap_single(kdev, dma_unmap_addr(cb, dma_addr), RX_BUF_LENGTH, DMA_FROM_DEVICE); @@ -543,23 +562,11 @@ static unsigned int bcm_sysport_desc_rx(struct bcm_sysport_priv *priv, status = (rsb->rx_status_len >> DESC_STATUS_SHIFT) & DESC_STATUS_MASK; - processed++; - priv->rx_read_ptr++; - if (priv->rx_read_ptr == priv->num_rx_bds) - priv->rx_read_ptr = 0; - netif_dbg(priv, rx_status, ndev, "p=%d, c=%d, rd_ptr=%d, len=%d, flag=0x%04x\n", p_index, priv->rx_c_index, priv->rx_read_ptr, len, status); - if (unlikely(!skb)) { - netif_err(priv, rx_err, ndev, "out of memory!\n"); - ndev->stats.rx_dropped++; - ndev->stats.rx_errors++; - goto refill; - } - if (unlikely(!(status & DESC_EOP) || !(status & DESC_SOP))) { netif_err(priv, rx_status, ndev, "fragmented packet!\n"); ndev->stats.rx_dropped++; -- cgit v1.2.3 From b629be5c8399d7c423b92135eb43a86c924d1cbc Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 8 Sep 2014 11:37:52 -0700 Subject: net: bcmgenet: check harder for out of memory conditions There is a potential case where we might be failing to refill a control block, leaving it with both a NULL skb pointer *and* a NULL dma_unmap_addr. The way we process incoming packets, by first calling dma_unmap_single(), and then only checking for a potential NULL skb can lead to situations where do pass a NULL dma_unmap_addr() to dma_unmap_single(), resulting in an oops. Fix this my moving the NULL skb check earlier, since no backing skb also means no corresponding DMA mapping for this packet. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 33 +++++++++++++++----------- 1 file changed, 19 insertions(+), 14 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index 3f9d4de8173c..cdef86a03862 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -1274,12 +1274,29 @@ static unsigned int bcmgenet_desc_rx(struct bcmgenet_priv *priv, while ((rxpktprocessed < rxpkttoprocess) && (rxpktprocessed < budget)) { + cb = &priv->rx_cbs[priv->rx_read_ptr]; + skb = cb->skb; + + rxpktprocessed++; + + priv->rx_read_ptr++; + priv->rx_read_ptr &= (priv->num_rx_bds - 1); + + /* We do not have a backing SKB, so we do not have a + * corresponding DMA mapping for this incoming packet since + * bcmgenet_rx_refill always either has both skb and mapping or + * none. + */ + if (unlikely(!skb)) { + dev->stats.rx_dropped++; + dev->stats.rx_errors++; + goto refill; + } + /* Unmap the packet contents such that we can use the * RSV from the 64 bytes descriptor when enabled and save * a 32-bits register read */ - cb = &priv->rx_cbs[priv->rx_read_ptr]; - skb = cb->skb; dma_unmap_single(&dev->dev, dma_unmap_addr(cb, dma_addr), priv->rx_buf_len, DMA_FROM_DEVICE); @@ -1307,18 +1324,6 @@ static unsigned int bcmgenet_desc_rx(struct bcmgenet_priv *priv, __func__, p_index, priv->rx_c_index, priv->rx_read_ptr, dma_length_status); - rxpktprocessed++; - - priv->rx_read_ptr++; - priv->rx_read_ptr &= (priv->num_rx_bds - 1); - - /* out of memory, just drop packets at the hardware level */ - if (unlikely(!skb)) { - dev->stats.rx_dropped++; - dev->stats.rx_errors++; - goto refill; - } - if (unlikely(!(dma_flag & DMA_EOP) || !(dma_flag & DMA_SOP))) { netif_err(priv, rx_status, dev, "dropping fragmented packet!\n"); -- cgit v1.2.3 From 37b7021d9d713964482faeb9e0935f458a1a4016 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Tue, 9 Sep 2014 18:07:55 +0900 Subject: net:bonding: Add missing space in bonding driver parameter description This patch adds missing space between "interface" and "by" in bonding module parameter description. Signed-off-by: Masanari Iida Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index f0f5eab0fab1..57912ee231cb 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -175,7 +175,7 @@ MODULE_PARM_DESC(fail_over_mac, "For active-backup, do not set all slaves to " "the same MAC; 0 for none (default), " "1 for active, 2 for follow"); module_param(all_slaves_active, int, 0); -MODULE_PARM_DESC(all_slaves_active, "Keep all frames received on an interface" +MODULE_PARM_DESC(all_slaves_active, "Keep all frames received on an interface " "by setting active flag for all slaves; " "0 for never (default), 1 for always."); module_param(resend_igmp, int, 0); -- cgit v1.2.3 From a0e2c822bf0a1095dc250b5875e39ac0662a5df6 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Wed, 10 Sep 2014 16:38:09 +0530 Subject: drivers: net: cpsw: dual_emac: fix reducing of rx descriptor during ifdown In Dual EMAC, when both interface are up and while doing ifdown with heavy traffic then skbs already processed by DMA from that slave emac has to be requeued as still the other interface is up and running. Signed-off-by: Mugunthan V N Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 999fb72688d2..411232f07c3f 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -699,6 +699,28 @@ static void cpsw_rx_handler(void *token, int len, int status) cpsw_dual_emac_src_port_detect(status, priv, ndev, skb); if (unlikely(status < 0) || unlikely(!netif_running(ndev))) { + bool ndev_status = false; + struct cpsw_slave *slave = priv->slaves; + int n; + + if (priv->data.dual_emac) { + /* In dual emac mode check for all interfaces */ + for (n = priv->data.slaves; n; n--, slave++) + if (netif_running(slave->ndev)) + ndev_status = true; + } + + if (ndev_status && (status >= 0)) { + /* The packet received is for the interface which + * is already down and the other interface is up + * and running, intead of freeing which results + * in reducing of the number of rx descriptor in + * DMA engine, requeue skb back to cpdma. + */ + new_skb = skb; + goto requeue; + } + /* the interface is going down, skbs are purged */ dev_kfree_skb_any(skb); return; @@ -717,6 +739,7 @@ static void cpsw_rx_handler(void *token, int len, int status) new_skb = skb; } +requeue: ret = cpdma_chan_submit(priv->rxch, new_skb, new_skb->data, skb_tailroom(new_skb), 0); if (WARN_ON(ret < 0)) -- cgit v1.2.3 From a91c772fa0275163508e1078ff6d474d423244fb Mon Sep 17 00:00:00 2001 From: Matan Barak Date: Wed, 10 Sep 2014 16:41:53 +0300 Subject: net/mlx4: Correctly configure single ported VFs from the host Single port VFs are seen PCI wise on both ports of the PF (we don't have single port PFs with ConnectX). With this in mind, it's possible for virtualization tools to try and configure a single ported VF through the "wrong" PF port. To handle that, we use the PF driver mapping of single port VFs to NIC ports and adjust the port value before calling into the low level code that does the actual VF configuration Fixes: 449fc48 ('net/mlx4: Adapt code for N-Port VF') Signed-off-by: Matan Barak Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/cmd.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c index 65a4a0f88ea0..02a2e90d581a 100644 --- a/drivers/net/ethernet/mellanox/mlx4/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c @@ -2389,6 +2389,22 @@ struct mlx4_slaves_pport mlx4_phys_to_slaves_pport_actv( } EXPORT_SYMBOL_GPL(mlx4_phys_to_slaves_pport_actv); +static int mlx4_slaves_closest_port(struct mlx4_dev *dev, int slave, int port) +{ + struct mlx4_active_ports actv_ports = mlx4_get_active_ports(dev, slave); + int min_port = find_first_bit(actv_ports.ports, dev->caps.num_ports) + + 1; + int max_port = min_port + + bitmap_weight(actv_ports.ports, dev->caps.num_ports); + + if (port < min_port) + port = min_port; + else if (port >= max_port) + port = max_port - 1; + + return port; +} + int mlx4_set_vf_mac(struct mlx4_dev *dev, int port, int vf, u64 mac) { struct mlx4_priv *priv = mlx4_priv(dev); @@ -2402,6 +2418,7 @@ int mlx4_set_vf_mac(struct mlx4_dev *dev, int port, int vf, u64 mac) if (slave < 0) return -EINVAL; + port = mlx4_slaves_closest_port(dev, slave, port); s_info = &priv->mfunc.master.vf_admin[slave].vport[port]; s_info->mac = mac; mlx4_info(dev, "default mac on vf %d port %d to %llX will take afect only after vf restart\n", @@ -2428,6 +2445,7 @@ int mlx4_set_vf_vlan(struct mlx4_dev *dev, int port, int vf, u16 vlan, u8 qos) if (slave < 0) return -EINVAL; + port = mlx4_slaves_closest_port(dev, slave, port); vf_admin = &priv->mfunc.master.vf_admin[slave].vport[port]; if ((0 == vlan) && (0 == qos)) @@ -2455,6 +2473,7 @@ bool mlx4_get_slave_default_vlan(struct mlx4_dev *dev, int port, int slave, struct mlx4_priv *priv; priv = mlx4_priv(dev); + port = mlx4_slaves_closest_port(dev, slave, port); vp_oper = &priv->mfunc.master.vf_oper[slave].vport[port]; if (MLX4_VGT != vp_oper->state.default_vlan) { @@ -2482,6 +2501,7 @@ int mlx4_set_vf_spoofchk(struct mlx4_dev *dev, int port, int vf, bool setting) if (slave < 0) return -EINVAL; + port = mlx4_slaves_closest_port(dev, slave, port); s_info = &priv->mfunc.master.vf_admin[slave].vport[port]; s_info->spoofchk = setting; @@ -2535,6 +2555,7 @@ int mlx4_set_vf_link_state(struct mlx4_dev *dev, int port, int vf, int link_stat if (slave < 0) return -EINVAL; + port = mlx4_slaves_closest_port(dev, slave, port); switch (link_state) { case IFLA_VF_LINK_STATE_AUTO: /* get current link state */ -- cgit v1.2.3 From 311be98a3cca6469adf369714d689f9bbf286190 Mon Sep 17 00:00:00 2001 From: Matan Barak Date: Wed, 10 Sep 2014 16:41:54 +0300 Subject: net/mlx4: Use the correct VSD mask in UPDATE_QP When doing VGT->VST->VGT state changes, we used an incorrect mask for the vlan-stripping-disable (VSD) flag, hence the vlan related policy for user-space Raw Ethernet QPs open by VFs wasn't really applied. Fix that, by using the correct mask. Fixes: f0f829b ('net/mlx4_core: Add immediate activate for VGT->VST->VGT') Signed-off-by: Matan Barak Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/resource_tracker.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index 1089367fed22..f87a4a38575f 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -4818,7 +4818,7 @@ void mlx4_vf_immed_vlan_work_handler(struct work_struct *_work) MLX4_VLAN_CTRL_ETH_RX_BLOCK_UNTAGGED; upd_context = mailbox->buf; - upd_context->qp_mask = cpu_to_be64(MLX4_UPD_QP_MASK_VSD); + upd_context->qp_mask = cpu_to_be64(1ULL << MLX4_UPD_QP_MASK_VSD); spin_lock_irq(mlx4_tlock(dev)); list_for_each_entry_safe(qp, tmp, qp_list, com.list) { -- cgit v1.2.3 From b7834758e6f33da401f584035f1b6b62d0672aab Mon Sep 17 00:00:00 2001 From: Matan Barak Date: Wed, 10 Sep 2014 16:41:55 +0300 Subject: net/mlx4: Avoid dealing with MAC index in UPDATE_QP wrapper if not needed The current wrapper implementation of the UPDATE_QP command tries to get the MAC index, even if MAC wasn't set by the VF. Fix it up to only handle the MAC field if it's valid. Fixes: ce8d9e0 ('net/mlx4_core: Add UPDATE_QP SRIOV wrapper support') Signed-off-by: Matan Barak Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/resource_tracker.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index f87a4a38575f..2fe61b6a8e37 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -3998,13 +3998,17 @@ int mlx4_UPDATE_QP_wrapper(struct mlx4_dev *dev, int slave, } port = (rqp->sched_queue >> 6 & 1) + 1; - smac_index = cmd->qp_context.pri_path.grh_mylmc; - err = mac_find_smac_ix_in_slave(dev, slave, port, - smac_index, &mac); - if (err) { - mlx4_err(dev, "Failed to update qpn 0x%x, MAC is invalid. smac_ix: %d\n", - qpn, smac_index); - goto err_mac; + + if (pri_addr_path_mask & (1ULL << MLX4_UPD_QP_PATH_MASK_MAC_INDEX)) { + smac_index = cmd->qp_context.pri_path.grh_mylmc; + err = mac_find_smac_ix_in_slave(dev, slave, port, + smac_index, &mac); + + if (err) { + mlx4_err(dev, "Failed to update qpn 0x%x, MAC is invalid. smac_ix: %d\n", + qpn, smac_index); + goto err_mac; + } } err = mlx4_cmd(dev, inbox->dma, -- cgit v1.2.3 From 09e05c3f78e9e82bda5958eb95bbf719f7a0ed6b Mon Sep 17 00:00:00 2001 From: Matan Barak Date: Wed, 10 Sep 2014 16:41:56 +0300 Subject: net/mlx4: Set vlan stripping policy by the right command Changing the vlan stripping policy of the QP isn't supported by older firmware versions for the INIT2RTR command. Nevertheless, we've used it. Fix that by doing this policy change using INIT2RTR only if the firmware supports it, otherwise, we call UPDATE_QP command to do the task. Fixes: 7677fc9 ('net/mlx4: Strengthen VLAN tags/priorities enforcement in VST mode') Signed-off-by: Matan Barak Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/qp.c | 12 ++++++++++-- drivers/net/ethernet/mellanox/mlx4/resource_tracker.c | 18 ++++++++++++++++-- 2 files changed, 26 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx4/qp.c b/drivers/net/ethernet/mellanox/mlx4/qp.c index 0dc31d85fc3b..2301365c79c7 100644 --- a/drivers/net/ethernet/mellanox/mlx4/qp.c +++ b/drivers/net/ethernet/mellanox/mlx4/qp.c @@ -390,13 +390,14 @@ err_icm: EXPORT_SYMBOL_GPL(mlx4_qp_alloc); #define MLX4_UPDATE_QP_SUPPORTED_ATTRS MLX4_UPDATE_QP_SMAC -int mlx4_update_qp(struct mlx4_dev *dev, struct mlx4_qp *qp, +int mlx4_update_qp(struct mlx4_dev *dev, u32 qpn, enum mlx4_update_qp_attr attr, struct mlx4_update_qp_params *params) { struct mlx4_cmd_mailbox *mailbox; struct mlx4_update_qp_context *cmd; u64 pri_addr_path_mask = 0; + u64 qp_mask = 0; int err = 0; mailbox = mlx4_alloc_cmd_mailbox(dev); @@ -413,9 +414,16 @@ int mlx4_update_qp(struct mlx4_dev *dev, struct mlx4_qp *qp, cmd->qp_context.pri_path.grh_mylmc = params->smac_index; } + if (attr & MLX4_UPDATE_QP_VSD) { + qp_mask |= 1ULL << MLX4_UPD_QP_MASK_VSD; + if (params->flags & MLX4_UPDATE_QP_PARAMS_FLAGS_VSD_ENABLE) + cmd->qp_context.param3 |= cpu_to_be32(MLX4_STRIP_VLAN); + } + cmd->primary_addr_path_mask = cpu_to_be64(pri_addr_path_mask); + cmd->qp_mask = cpu_to_be64(qp_mask); - err = mlx4_cmd(dev, mailbox->dma, qp->qpn & 0xffffff, 0, + err = mlx4_cmd(dev, mailbox->dma, qpn & 0xffffff, 0, MLX4_CMD_UPDATE_QP, MLX4_CMD_TIME_CLASS_A, MLX4_CMD_NATIVE); diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index 2fe61b6a8e37..5d2498dcf536 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -702,11 +702,13 @@ static int update_vport_qp_param(struct mlx4_dev *dev, struct mlx4_qp_context *qpc = inbox->buf + 8; struct mlx4_vport_oper_state *vp_oper; struct mlx4_priv *priv; + u32 qp_type; int port; port = (qpc->pri_path.sched_queue & 0x40) ? 2 : 1; priv = mlx4_priv(dev); vp_oper = &priv->mfunc.master.vf_oper[slave].vport[port]; + qp_type = (be32_to_cpu(qpc->flags) >> 16) & 0xff; if (MLX4_VGT != vp_oper->state.default_vlan) { /* the reserved QPs (special, proxy, tunnel) @@ -715,8 +717,20 @@ static int update_vport_qp_param(struct mlx4_dev *dev, if (mlx4_is_qp_reserved(dev, qpn)) return 0; - /* force strip vlan by clear vsd */ - qpc->param3 &= ~cpu_to_be32(MLX4_STRIP_VLAN); + /* force strip vlan by clear vsd, MLX QP refers to Raw Ethernet */ + if (qp_type == MLX4_QP_ST_UD || + (qp_type == MLX4_QP_ST_MLX && mlx4_is_eth(dev, port))) { + if (dev->caps.bmme_flags & MLX4_BMME_FLAG_VSD_INIT2RTR) { + *(__be32 *)inbox->buf = + cpu_to_be32(be32_to_cpu(*(__be32 *)inbox->buf) | + MLX4_QP_OPTPAR_VLAN_STRIPPING); + qpc->param3 &= ~cpu_to_be32(MLX4_STRIP_VLAN); + } else { + struct mlx4_update_qp_params params = {.flags = 0}; + + mlx4_update_qp(dev, qpn, MLX4_UPDATE_QP_VSD, ¶ms); + } + } if (vp_oper->state.link_state == IFLA_VF_LINK_STATE_DISABLE && dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_UPDATE_QP) { -- cgit v1.2.3 From 8badd65e48c90d66587359d5329c2813088c0f50 Mon Sep 17 00:00:00 2001 From: David Jander Date: Wed, 27 Aug 2014 12:02:16 +0200 Subject: can: flexcan: avoid calling usleep_range from interrupt context Apparently can_restart() runs from a (timer-) interrupt and can call flexcan_chip_[en|dis]able(), so avoid using usleep_range() Signed-off-by: David Jander Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/flexcan.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 944aa5d3af6e..630c7bf032a8 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -298,7 +298,7 @@ static int flexcan_chip_enable(struct flexcan_priv *priv) flexcan_write(reg, ®s->mcr); while (timeout-- && (flexcan_read(®s->mcr) & FLEXCAN_MCR_LPM_ACK)) - usleep_range(10, 20); + udelay(10); if (flexcan_read(®s->mcr) & FLEXCAN_MCR_LPM_ACK) return -ETIMEDOUT; @@ -317,7 +317,7 @@ static int flexcan_chip_disable(struct flexcan_priv *priv) flexcan_write(reg, ®s->mcr); while (timeout-- && !(flexcan_read(®s->mcr) & FLEXCAN_MCR_LPM_ACK)) - usleep_range(10, 20); + udelay(10); if (!(flexcan_read(®s->mcr) & FLEXCAN_MCR_LPM_ACK)) return -ETIMEDOUT; @@ -336,7 +336,7 @@ static int flexcan_chip_freeze(struct flexcan_priv *priv) flexcan_write(reg, ®s->mcr); while (timeout-- && !(flexcan_read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK)) - usleep_range(100, 200); + udelay(100); if (!(flexcan_read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK)) return -ETIMEDOUT; @@ -355,7 +355,7 @@ static int flexcan_chip_unfreeze(struct flexcan_priv *priv) flexcan_write(reg, ®s->mcr); while (timeout-- && (flexcan_read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK)) - usleep_range(10, 20); + udelay(10); if (flexcan_read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK) return -ETIMEDOUT; @@ -370,7 +370,7 @@ static int flexcan_chip_softreset(struct flexcan_priv *priv) flexcan_write(FLEXCAN_MCR_SOFTRST, ®s->mcr); while (timeout-- && (flexcan_read(®s->mcr) & FLEXCAN_MCR_SOFTRST)) - usleep_range(10, 20); + udelay(10); if (flexcan_read(®s->mcr) & FLEXCAN_MCR_SOFTRST) return -ETIMEDOUT; -- cgit v1.2.3 From ae0fd6354134e63aa3e62456e2080c430287144d Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Thu, 11 Sep 2014 19:05:48 +0530 Subject: Revert "ath9k: Calculate sleep duration" This reverts commit 09ebb810927a110e4c354beb20308830d108a54b. ath9k_hw_set_sta_beacon_timers() configures AR_TIM_PERIOD with the beacon interval. Before this commit, the sleepduration was never greater than the beacon interval. But now, the behavior has changed. For example, with an AP that uses a beacon interval of 100: ath: phy9: next beacon 61128704 ath: phy9: beacon period 204800 ath: phy9: DTIM period 204800 If the sleepduration is calculated based on the listen time, then the bmiss threshold should also be changed since the HW would be in sleep state for a longer time, but that is not done currently. To avoid configuring a higher beacon interval based on the sleepduration, revert to the original behavior. Power consumption is not a problem since PS is disabled in ath9k anyway. Cc: stable@vger.kernel.org Cc: Rajkumar Manoharan Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/common-beacon.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/common-beacon.c b/drivers/net/wireless/ath/ath9k/common-beacon.c index 733be5178481..6ad44470d0f2 100644 --- a/drivers/net/wireless/ath/ath9k/common-beacon.c +++ b/drivers/net/wireless/ath/ath9k/common-beacon.c @@ -57,7 +57,7 @@ int ath9k_cmn_beacon_config_sta(struct ath_hw *ah, struct ath9k_beacon_state *bs) { struct ath_common *common = ath9k_hw_common(ah); - int dtim_intval, sleepduration; + int dtim_intval; u64 tsf; /* No need to configure beacon if we are not associated */ @@ -75,7 +75,6 @@ int ath9k_cmn_beacon_config_sta(struct ath_hw *ah, * last beacon we received (which may be none). */ dtim_intval = conf->intval * conf->dtim_period; - sleepduration = ah->hw->conf.listen_interval * conf->intval; /* * Pull nexttbtt forward to reflect the current @@ -113,7 +112,7 @@ int ath9k_cmn_beacon_config_sta(struct ath_hw *ah, */ bs->bs_sleepduration = TU_TO_USEC(roundup(IEEE80211_MS_TO_TU(100), - sleepduration)); + conf->intval)); if (bs->bs_sleepduration > bs->bs_dtimperiod) bs->bs_sleepduration = bs->bs_dtimperiod; -- cgit v1.2.3 From 7ce7679d6bbd1715799a9cf17b9b558bc2d962b7 Mon Sep 17 00:00:00 2001 From: Beniamino Galvani Date: Wed, 10 Sep 2014 22:50:02 +0200 Subject: net: arc_emac: enable tx interrupts In the current implementation the cleaning of tx ring is done by the NAPI poll handler, which is scheduled after rx interrupts. Thus, in absence of received packets the reclaim of used tx buffers is never executed, blocking further transmission. This can be easily reproduced starting the transmission of a UDP flow with iperf, which blocks almost immediately because skbs are not returned to the stack and the socket send buffer becomes full. The patch enables tx interrupts so that the tx reclaim is scheduled after completed transmissions. Signed-off-by: Beniamino Galvani Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/arc/emac_main.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/arc/emac_main.c b/drivers/net/ethernet/arc/emac_main.c index fe5cfeace6e3..f7ab90d9cd7e 100644 --- a/drivers/net/ethernet/arc/emac_main.c +++ b/drivers/net/ethernet/arc/emac_main.c @@ -298,7 +298,7 @@ static int arc_emac_poll(struct napi_struct *napi, int budget) work_done = arc_emac_rx(ndev, budget); if (work_done < budget) { napi_complete(napi); - arc_reg_or(priv, R_ENABLE, RXINT_MASK); + arc_reg_or(priv, R_ENABLE, RXINT_MASK | TXINT_MASK); } return work_done; @@ -327,9 +327,9 @@ static irqreturn_t arc_emac_intr(int irq, void *dev_instance) /* Reset all flags except "MDIO complete" */ arc_reg_set(priv, R_STATUS, status); - if (status & RXINT_MASK) { + if (status & (RXINT_MASK | TXINT_MASK)) { if (likely(napi_schedule_prep(&priv->napi))) { - arc_reg_clr(priv, R_ENABLE, RXINT_MASK); + arc_reg_clr(priv, R_ENABLE, RXINT_MASK | TXINT_MASK); __napi_schedule(&priv->napi); } } @@ -440,7 +440,7 @@ static int arc_emac_open(struct net_device *ndev) arc_reg_set(priv, R_TX_RING, (unsigned int)priv->txbd_dma); /* Enable interrupts */ - arc_reg_set(priv, R_ENABLE, RXINT_MASK | ERR_MASK); + arc_reg_set(priv, R_ENABLE, RXINT_MASK | TXINT_MASK | ERR_MASK); /* Set CONTROL */ arc_reg_set(priv, R_CTRL, @@ -511,7 +511,7 @@ static int arc_emac_stop(struct net_device *ndev) netif_stop_queue(ndev); /* Disable interrupts */ - arc_reg_clr(priv, R_ENABLE, RXINT_MASK | ERR_MASK); + arc_reg_clr(priv, R_ENABLE, RXINT_MASK | TXINT_MASK | ERR_MASK); /* Disable EMAC */ arc_reg_clr(priv, R_CTRL, EN_MASK); -- cgit v1.2.3 From 74dd40bca95f9968e368751ea81f3b98471109ce Mon Sep 17 00:00:00 2001 From: Beniamino Galvani Date: Wed, 10 Sep 2014 22:50:03 +0200 Subject: net: arc_emac: prevent reuse of unreclaimed tx descriptors This patch changes the logic in tx path to ensure that tx descriptors are reused for transmission only after they have been reclaimed by arc_emac_tx_clean(). Signed-off-by: Beniamino Galvani Signed-off-by: David S. Miller --- drivers/net/ethernet/arc/emac_main.c | 43 +++++++++++++++++++++++++++--------- 1 file changed, 32 insertions(+), 11 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/arc/emac_main.c b/drivers/net/ethernet/arc/emac_main.c index f7ab90d9cd7e..5919394d9f58 100644 --- a/drivers/net/ethernet/arc/emac_main.c +++ b/drivers/net/ethernet/arc/emac_main.c @@ -29,6 +29,17 @@ #define DRV_NAME "arc_emac" #define DRV_VERSION "1.0" +/** + * arc_emac_tx_avail - Return the number of available slots in the tx ring. + * @priv: Pointer to ARC EMAC private data structure. + * + * returns: the number of slots available for transmission in tx the ring. + */ +static inline int arc_emac_tx_avail(struct arc_emac_priv *priv) +{ + return (priv->txbd_dirty + TX_BD_NUM - priv->txbd_curr - 1) % TX_BD_NUM; +} + /** * arc_emac_adjust_link - Adjust the PHY link duplex. * @ndev: Pointer to the net_device structure. @@ -180,10 +191,15 @@ static void arc_emac_tx_clean(struct net_device *ndev) txbd->info = 0; *txbd_dirty = (*txbd_dirty + 1) % TX_BD_NUM; - - if (netif_queue_stopped(ndev)) - netif_wake_queue(ndev); } + + /* Ensure that txbd_dirty is visible to tx() before checking + * for queue stopped. + */ + smp_mb(); + + if (netif_queue_stopped(ndev) && arc_emac_tx_avail(priv)) + netif_wake_queue(ndev); } /** @@ -574,11 +590,9 @@ static int arc_emac_tx(struct sk_buff *skb, struct net_device *ndev) len = max_t(unsigned int, ETH_ZLEN, skb->len); - /* EMAC still holds this buffer in its possession. - * CPU must not modify this buffer descriptor - */ - if (unlikely((le32_to_cpu(*info) & OWN_MASK) == FOR_EMAC)) { + if (unlikely(!arc_emac_tx_avail(priv))) { netif_stop_queue(ndev); + netdev_err(ndev, "BUG! Tx Ring full when queue awake!\n"); return NETDEV_TX_BUSY; } @@ -607,12 +621,19 @@ static int arc_emac_tx(struct sk_buff *skb, struct net_device *ndev) /* Increment index to point to the next BD */ *txbd_curr = (*txbd_curr + 1) % TX_BD_NUM; - /* Get "info" of the next BD */ - info = &priv->txbd[*txbd_curr].info; + /* Ensure that tx_clean() sees the new txbd_curr before + * checking the queue status. This prevents an unneeded wake + * of the queue in tx_clean(). + */ + smp_mb(); - /* Check if if Tx BD ring is full - next BD is still owned by EMAC */ - if (unlikely((le32_to_cpu(*info) & OWN_MASK) == FOR_EMAC)) + if (!arc_emac_tx_avail(priv)) { netif_stop_queue(ndev); + /* Refresh tx_dirty */ + smp_mb(); + if (arc_emac_tx_avail(priv)) + netif_start_queue(ndev); + } arc_reg_set(priv, R_STATUS, TXPL_MASK); -- cgit v1.2.3 From 0bc9b73be43b21838973e80ddeb5250f0310ebf7 Mon Sep 17 00:00:00 2001 From: Mark Einon Date: Thu, 11 Sep 2014 23:19:49 +0100 Subject: drivers: net: b44: Fix typo in returning multicast stats nstat->multicast refers to received packets, not transmitted as is returned here. Change it so that received packet stats are given. Signed-off-by: Mark Einon Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/b44.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c index 4a7028d65912..d588136b23b9 100644 --- a/drivers/net/ethernet/broadcom/b44.c +++ b/drivers/net/ethernet/broadcom/b44.c @@ -1697,7 +1697,7 @@ static struct rtnl_link_stats64 *b44_get_stats64(struct net_device *dev, hwstat->tx_underruns + hwstat->tx_excessive_cols + hwstat->tx_late_cols); - nstat->multicast = hwstat->tx_multicast_pkts; + nstat->multicast = hwstat->rx_multicast_pkts; nstat->collisions = hwstat->tx_total_cols; nstat->rx_length_errors = (hwstat->rx_oversize_pkts + -- cgit v1.2.3 From 618073e30c225ddaef086c030a5f0a3c7ef2d323 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Thu, 11 Sep 2014 22:52:38 +0530 Subject: drivers: net: cpsw: dual_emac: in suspend/resume bring down/up all the netdev During suspend and resume in Dual EMAC, second port is not working as in suspend/resume only the first slave netdev is closed and opened. So bring down and up all the interfaces that are up during suspend/resume. Signed-off-by: Mugunthan V N Tested-by: Nishanth Menon Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 29 ++++++++++++++++++++++++----- 1 file changed, 24 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 411232f07c3f..e2a00287f8eb 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -2334,10 +2334,19 @@ static int cpsw_suspend(struct device *dev) struct net_device *ndev = platform_get_drvdata(pdev); struct cpsw_priv *priv = netdev_priv(ndev); - if (netif_running(ndev)) - cpsw_ndo_stop(ndev); + if (priv->data.dual_emac) { + int i; - for_each_slave(priv, soft_reset_slave); + for (i = 0; i < priv->data.slaves; i++) { + if (netif_running(priv->slaves[i].ndev)) + cpsw_ndo_stop(priv->slaves[i].ndev); + soft_reset_slave(priv->slaves + i); + } + } else { + if (netif_running(ndev)) + cpsw_ndo_stop(ndev); + for_each_slave(priv, soft_reset_slave); + } pm_runtime_put_sync(&pdev->dev); @@ -2351,14 +2360,24 @@ static int cpsw_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct net_device *ndev = platform_get_drvdata(pdev); + struct cpsw_priv *priv = netdev_priv(ndev); pm_runtime_get_sync(&pdev->dev); /* Select default pin state */ pinctrl_pm_select_default_state(&pdev->dev); - if (netif_running(ndev)) - cpsw_ndo_open(ndev); + if (priv->data.dual_emac) { + int i; + + for (i = 0; i < priv->data.slaves; i++) { + if (netif_running(priv->slaves[i].ndev)) + cpsw_ndo_open(priv->slaves[i].ndev); + } + } else { + if (netif_running(ndev)) + cpsw_ndo_open(ndev); + } return 0; } -- cgit v1.2.3 From 48c20407f49039d8da155ca00877ec5f057799e6 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Fri, 12 Sep 2014 11:35:11 +0800 Subject: r8169: fix the default setting of rx vlan If the parameter "features" of __rtl8169_set_features() is equal to dev->features, the variable "changed" is alwayes 0, and nothing would be changed. Signed-off-by: Hayes Wang Signed-off-b