From 2aba76f014a7b56ab4fe75845c5fd57b5590acc2 Mon Sep 17 00:00:00 2001
From: Michael Williamson <michael.williamson@criticallink.com>
Date: Fri, 20 May 2011 10:26:06 -0400
Subject: audio: tlv320aic26: fix PLL register configuration

The current PLL configuration code for the tlc320aic26 codec appears to assume a
hardcoded system clock of 12 MHz.  Use the clock value provided by the DAI_OPS
API for the calculation.

Tested using a MityDSP-L138 platform providing a 24.576 MHz clock.

Signed-off-by: Michael Williamson <michael.williamson@criticallink.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@ti.com>
---
 sound/soc/codecs/tlv320aic26.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/sound/soc/codecs/tlv320aic26.c b/sound/soc/codecs/tlv320aic26.c
index e2a7608d3944..7859bdcc93db 100644
--- a/sound/soc/codecs/tlv320aic26.c
+++ b/sound/soc/codecs/tlv320aic26.c
@@ -161,10 +161,18 @@ static int aic26_hw_params(struct snd_pcm_substream *substream,
 		dev_dbg(&aic26->spi->dev, "bad format\n"); return -EINVAL;
 	}
 
-	/* Configure PLL */
+	/**
+	 * Configure PLL
+	 * fsref = (mclk * PLLM) / 2048
+	 * where PLLM = J.DDDD (DDDD register ranges from 0 to 9999, decimal)
+	 */
 	pval = 1;
-	jval = (fsref == 44100) ? 7 : 8;
-	dval = (fsref == 44100) ? 5264 : 1920;
+	/* compute J portion of multiplier */
+	jval = fsref / (aic26->mclk / 2048);
+	/* compute fractional DDDD component of multiplier */
+	dval = fsref - (jval * (aic26->mclk / 2048));
+	dval = (10000 * dval) / (aic26->mclk / 2048);
+	dev_dbg(&aic26->spi->dev, "Setting PLLM to %d.%04d\n", jval, dval);
 	qval = 0;
 	reg = 0x8000 | qval << 11 | pval << 8 | jval << 2;
 	aic26_reg_write(codec, AIC26_REG_PLL_PROG1, reg);
-- 
cgit v1.2.3


From 508b76864c18f34f8d6ba08d192f5817f8dc8ead Mon Sep 17 00:00:00 2001
From: Jarkko Nikula <jhnikula@gmail.com>
Date: Fri, 20 May 2011 16:52:37 +0300
Subject: ASoC: tlv320aic3x: Don't sync first two registers from register cache

There is no need to sync first two registers from cache to hw after a reset.
First one is used to select page for register access and this driver is
normally accessing page 0 only. Second one does a software reset which is
obviously unneeded after hardware or previous software reset command.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@ti.com>
---
 sound/soc/codecs/tlv320aic3x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index c3d96fc8c267..9047bb173c6b 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -1114,7 +1114,7 @@ static int aic3x_set_power(struct snd_soc_codec *codec, int power)
 
 		/* Sync reg_cache with the hardware */
 		codec->cache_only = 0;
-		for (i = 0; i < ARRAY_SIZE(aic3x_reg); i++)
+		for (i = AIC3X_SAMPLE_RATE_SEL_REG; i < ARRAY_SIZE(aic3x_reg); i++)
 			snd_soc_write(codec, i, cache[i]);
 		if (aic3x->model == AIC3X_MODEL_3007)
 			aic3x_init_3007(codec);
-- 
cgit v1.2.3


From 9fb352b18b11124ed1ddebc0d74ebbd7ba8defd7 Mon Sep 17 00:00:00 2001
From: Jarkko Nikula <jhnikula@gmail.com>
Date: Fri, 20 May 2011 16:52:38 +0300
Subject: ASoC: tlv320aic3x: Do soft reset to codec when going to bias off
 state

TLV320AIC33, TLV320AIC34 and I believe others too in this family have some
hw bugs that cause that analogue and digital VDD supplies remain leaking
up to a few mA of current after certain use cases even the hw blocks inside
codec are driven to off.

Highest leakages occur after using the bypass paths inside codec but it
is possible to get smaller leakages just by toggling mute switches in
unused audio paths (i.e. no DAPM changes) while codec is on due another
active audio path.

While some cases are able to workaroud by making sure that e.g. output mixer
switches are muted before powering down the output stage this doesn't help
all the cases.

Therefore use the software reset command to clear possible leakage currents
since that works in every cases and affects only this codec instance. Only
drawback is that now cache sync is required everytime when codec bias comes
out from bias off state, not only when supply regulators were off.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@ti.com>
---
 sound/soc/codecs/tlv320aic3x.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index 9047bb173c6b..789453d44ec5 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -1120,6 +1120,13 @@ static int aic3x_set_power(struct snd_soc_codec *codec, int power)
 			aic3x_init_3007(codec);
 		codec->cache_sync = 0;
 	} else {
+		/*
+		 * Do soft reset to this codec instance in order to clear
+		 * possible VDD leakage currents in case the supply regulators
+		 * remain on
+		 */
+		snd_soc_write(codec, AIC3X_RESET, SOFT_RESET);
+		codec->cache_sync = 1;
 		aic3x->power = 0;
 		/* HW writes are needless when bias is off */
 		codec->cache_only = 1;
-- 
cgit v1.2.3


From 5ae8f9a3757e4010c7ea9c07c047088fb812335e Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Thu, 26 May 2011 15:51:11 -0300
Subject: [media] mceusb: add and use mce_dbg printk macro

Using dev_dbg is more complexity than many users are able to deal with.
Make it easier to get debug spew feedback from them by adding an mce_dbg
printk macro that spews using dev_info when debug=1 is set for the
mceusb module.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/mceusb.c | 44 +++++++++++++++++++++++++-------------------
 1 file changed, 25 insertions(+), 19 deletions(-)

diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index ad927fcaa020..10ec54b93d26 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -108,6 +108,12 @@ static int debug = 1;
 static int debug;
 #endif
 
+#define mce_dbg(dev, fmt, ...)					\
+	do {							\
+		if (debug)					\
+			dev_info(dev, fmt, ## __VA_ARGS__);	\
+	} while (0)
+
 /* general constants */
 #define SEND_FLAG_IN_PROGRESS	1
 #define SEND_FLAG_COMPLETE	2
@@ -606,7 +612,7 @@ static void mce_async_callback(struct urb *urb, struct pt_regs *regs)
 	if (ir) {
 		len = urb->actual_length;
 
-		dev_dbg(ir->dev, "callback called (status=%d len=%d)\n",
+		mce_dbg(ir->dev, "callback called (status=%d len=%d)\n",
 			urb->status, len);
 
 		mceusb_dev_printdata(ir, urb->transfer_buffer, 0, len, true);
@@ -655,17 +661,17 @@ static void mce_request_packet(struct mceusb_dev *ir, unsigned char *data,
 		return;
 	}
 
-	dev_dbg(dev, "receive request called (size=%#x)\n", size);
+	mce_dbg(dev, "receive request called (size=%#x)\n", size);
 
 	async_urb->transfer_buffer_length = size;
 	async_urb->dev = ir->usbdev;
 
 	res = usb_submit_urb(async_urb, GFP_ATOMIC);
 	if (res) {
-		dev_dbg(dev, "receive request FAILED! (res=%d)\n", res);
+		mce_dbg(dev, "receive request FAILED! (res=%d)\n", res);
 		return;
 	}
-	dev_dbg(dev, "receive request complete (res=%d)\n", res);
+	mce_dbg(dev, "receive request complete (res=%d)\n", res);
 }
 
 static void mce_async_out(struct mceusb_dev *ir, unsigned char *data, int size)
@@ -794,7 +800,7 @@ static int mceusb_set_tx_carrier(struct rc_dev *dev, u32 carrier)
 			ir->carrier = carrier;
 			cmdbuf[2] = MCE_CMD_SIG_END;
 			cmdbuf[3] = MCE_IRDATA_TRAILER;
-			dev_dbg(ir->dev, "%s: disabling carrier "
+			mce_dbg(ir->dev, "%s: disabling carrier "
 				"modulation\n", __func__);
 			mce_async_out(ir, cmdbuf, sizeof(cmdbuf));
 			return carrier;
@@ -806,7 +812,7 @@ static int mceusb_set_tx_carrier(struct rc_dev *dev, u32 carrier)
 				ir->carrier = carrier;
 				cmdbuf[2] = prescaler;
 				cmdbuf[3] = divisor;
-				dev_dbg(ir->dev, "%s: requesting %u HZ "
+				mce_dbg(ir->dev, "%s: requesting %u HZ "
 					"carrier\n", __func__, carrier);
 
 				/* Transmit new carrier to mce device */
@@ -879,7 +885,7 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
 			rawir.duration = (ir->buf_in[i] & MCE_PULSE_MASK)
 					 * US_TO_NS(MCE_TIME_UNIT);
 
-			dev_dbg(ir->dev, "Storing %s with duration %d\n",
+			mce_dbg(ir->dev, "Storing %s with duration %d\n",
 				rawir.pulse ? "pulse" : "space",
 				rawir.duration);
 
@@ -911,7 +917,7 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
 		if (ir->parser_state != CMD_HEADER && !ir->rem)
 			ir->parser_state = CMD_HEADER;
 	}
-	dev_dbg(ir->dev, "processed IR data, calling ir_raw_event_handle\n");
+	mce_dbg(ir->dev, "processed IR data, calling ir_raw_event_handle\n");
 	ir_raw_event_handle(ir->rc);
 }
 
@@ -933,7 +939,7 @@ static void mceusb_dev_recv(struct urb *urb, struct pt_regs *regs)
 
 	if (ir->send_flags == RECV_FLAG_IN_PROGRESS) {
 		ir->send_flags = SEND_FLAG_COMPLETE;
-		dev_dbg(ir->dev, "setup answer received %d bytes\n",
+		mce_dbg(ir->dev, "setup answer received %d bytes\n",
 			buf_len);
 	}
 
@@ -951,7 +957,7 @@ static void mceusb_dev_recv(struct urb *urb, struct pt_regs *regs)
 
 	case -EPIPE:
 	default:
-		dev_dbg(ir->dev, "Error: urb status = %d\n", urb->status);
+		mce_dbg(ir->dev, "Error: urb status = %d\n", urb->status);
 		break;
 	}
 
@@ -978,8 +984,8 @@ static void mceusb_gen1_init(struct mceusb_dev *ir)
 	ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
 			      USB_REQ_SET_ADDRESS, USB_TYPE_VENDOR, 0, 0,
 			      data, USB_CTRL_MSG_SZ, HZ * 3);
-	dev_dbg(dev, "%s - ret = %d\n", __func__, ret);
-	dev_dbg(dev, "%s - data[0] = %d, data[1] = %d\n",
+	mce_dbg(dev, "%s - ret = %d\n", __func__, ret);
+	mce_dbg(dev, "%s - data[0] = %d, data[1] = %d\n",
 		__func__, data[0], data[1]);
 
 	/* set feature: bit rate 38400 bps */
@@ -987,19 +993,19 @@ static void mceusb_gen1_init(struct mceusb_dev *ir)
 			      USB_REQ_SET_FEATURE, USB_TYPE_VENDOR,
 			      0xc04e, 0x0000, NULL, 0, HZ * 3);
 
-	dev_dbg(dev, "%s - ret = %d\n", __func__, ret);
+	mce_dbg(dev, "%s - ret = %d\n", __func__, ret);
 
 	/* bRequest 4: set char length to 8 bits */
 	ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
 			      4, USB_TYPE_VENDOR,
 			      0x0808, 0x0000, NULL, 0, HZ * 3);
-	dev_dbg(dev, "%s - retB = %d\n", __func__, ret);
+	mce_dbg(dev, "%s - retB = %d\n", __func__, ret);
 
 	/* bRequest 2: set handshaking to use DTR/DSR */
 	ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
 			      2, USB_TYPE_VENDOR,
 			      0x0000, 0x0100, NULL, 0, HZ * 3);
-	dev_dbg(dev, "%s - retC = %d\n", __func__, ret);
+	mce_dbg(dev, "%s - retC = %d\n", __func__, ret);
 
 	/* device reset */
 	mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET));
@@ -1122,7 +1128,7 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
 	bool tx_mask_normal;
 	int ir_intfnum;
 
-	dev_dbg(&intf->dev, "%s called\n", __func__);
+	mce_dbg(&intf->dev, "%s called\n", __func__);
 
 	idesc  = intf->cur_altsetting;
 
@@ -1150,7 +1156,7 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
 			ep_in = ep;
 			ep_in->bmAttributes = USB_ENDPOINT_XFER_INT;
 			ep_in->bInterval = 1;
-			dev_dbg(&intf->dev, "acceptable inbound endpoint "
+			mce_dbg(&intf->dev, "acceptable inbound endpoint "
 				"found\n");
 		}
 
@@ -1165,12 +1171,12 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
 			ep_out = ep;
 			ep_out->bmAttributes = USB_ENDPOINT_XFER_INT;
 			ep_out->bInterval = 1;
-			dev_dbg(&intf->dev, "acceptable outbound endpoint "
+			mce_dbg(&intf->dev, "acceptable outbound endpoint "
 				"found\n");
 		}
 	}
 	if (ep_in == NULL) {
-		dev_dbg(&intf->dev, "inbound and/or endpoint not found\n");
+		mce_dbg(&intf->dev, "inbound and/or endpoint not found\n");
 		return -ENODEV;
 	}
 
-- 
cgit v1.2.3


From b825fe1b1bb5927402c3d3084641355946ef05f8 Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Thu, 26 May 2011 16:03:17 -0300
Subject: [media] mceusb: support I-O Data GV-MC7/RCKIT

There's an SMK-device-id remote kit from I-O Data avaiable primarily in
Japan, which appears to have no tx hardware, but has rx functionality
that works with the mceusb driver by simply adding its device ID.

Reported-by: Jeremy Kwok <jeremykwok@desu.ca>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/mceusb.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index 10ec54b93d26..650b2f479519 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -252,6 +252,9 @@ static struct usb_device_id mceusb_dev_table[] = {
 	  .driver_info = MCE_GEN2_TX_INV },
 	/* SMK eHome Infrared Transceiver */
 	{ USB_DEVICE(VENDOR_SMK, 0x0338) },
+	/* SMK/I-O Data GV-MC7/RCKIT Receiver */
+	{ USB_DEVICE(VENDOR_SMK, 0x0353),
+	  .driver_info = MCE_GEN2_NO_TX },
 	/* Tatung eHome Infrared Transceiver */
 	{ USB_DEVICE(VENDOR_TATUNG, 0x9150) },
 	/* Shuttle eHome Infrared Transceiver */
-- 
cgit v1.2.3


From 3a918aa69daf001910640cc910ea4053ba840a6e Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Thu, 26 May 2011 14:23:18 -0300
Subject: [media] mceusb: mce_sync_in is brain-dead

Aside from the initial "hey, lets make sure we've flushed any
pre-existing data on the device" call to mce_sync_in, every other one of
the calls was entirely superfluous. Ergo, remove them all, and rename
the one and only (questionably) useful one to reflect what it really
does. Verified on both gen2 and gen3 hardware to make zero difference.
Well, except that you no longer get a bunch of urb submit failures from
the unneeded mce_sync_in calls. Oh. And move that flush to a point
*after* we've wired up the inbound urb, or it won't do squat. I have
half a mind to just remove it entirely, but someone thought it was
necessary at some point, and it doesn't seem to hurt, so lets leave it
for the time being.

This excercise took place due to insightful questions asked by Hans
Petter Selasky, about the possible reuse of the inbound urb before it
was actually availble by mce_sync_in, so thanks to him for motivating
this cleanup.

Reported-by: Hans Petter Selasky <hselasky@c2i.net>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/mceusb.c | 30 +++++++-----------------------
 1 file changed, 7 insertions(+), 23 deletions(-)

diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index 650b2f479519..6cf22012079a 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -682,9 +682,9 @@ static void mce_async_out(struct mceusb_dev *ir, unsigned char *data, int size)
 	mce_request_packet(ir, data, size, MCEUSB_TX);
 }
 
-static void mce_sync_in(struct mceusb_dev *ir, unsigned char *data, int size)
+static void mce_flush_rx_buffer(struct mceusb_dev *ir, int size)
 {
-	mce_request_packet(ir, data, size, MCEUSB_RX);
+	mce_request_packet(ir, NULL, size, MCEUSB_RX);
 }
 
 /* Send data out the IR blaster port(s) */
@@ -970,7 +970,6 @@ static void mceusb_dev_recv(struct urb *urb, struct pt_regs *regs)
 static void mceusb_gen1_init(struct mceusb_dev *ir)
 {
 	int ret;
-	int maxp = ir->len_in;
 	struct device *dev = ir->dev;
 	char *data;
 
@@ -1012,55 +1011,40 @@ static void mceusb_gen1_init(struct mceusb_dev *ir)
 
 	/* device reset */
 	mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET));
-	mce_sync_in(ir, NULL, maxp);
 
 	/* get hw/sw revision? */
 	mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION));
-	mce_sync_in(ir, NULL, maxp);
 
 	kfree(data);
 };
 
 static void mceusb_gen2_init(struct mceusb_dev *ir)
 {
-	int maxp = ir->len_in;
-
 	/* device reset */
 	mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET));
-	mce_sync_in(ir, NULL, maxp);
 
 	/* get hw/sw revision? */
 	mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION));
-	mce_sync_in(ir, NULL, maxp);
 
 	/* unknown what the next two actually return... */
 	mce_async_out(ir, GET_UNKNOWN, sizeof(GET_UNKNOWN));
-	mce_sync_in(ir, NULL, maxp);
 	mce_async_out(ir, GET_UNKNOWN2, sizeof(GET_UNKNOWN2));
-	mce_sync_in(ir, NULL, maxp);
 }
 
 static void mceusb_get_parameters(struct mceusb_dev *ir)
 {
-	int maxp = ir->len_in;
-
 	/* get the carrier and frequency */
 	mce_async_out(ir, GET_CARRIER_FREQ, sizeof(GET_CARRIER_FREQ));
-	mce_sync_in(ir, NULL, maxp);
 
-	if (!ir->flags.no_tx) {
+	if (!ir->flags.no_tx)
 		/* get the transmitter bitmask */
 		mce_async_out(ir, GET_TX_BITMASK, sizeof(GET_TX_BITMASK));
-		mce_sync_in(ir, NULL, maxp);
-	}
 
 	/* get receiver timeout value */
 	mce_async_out(ir, GET_RX_TIMEOUT, sizeof(GET_RX_TIMEOUT));
-	mce_sync_in(ir, NULL, maxp);
 
 	/* get receiver sensor setting */
 	mce_async_out(ir, GET_RX_SENSOR, sizeof(GET_RX_SENSOR));
-	mce_sync_in(ir, NULL, maxp);
 }
 
 static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir)
@@ -1224,16 +1208,16 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
 	if (!ir->rc)
 		goto rc_dev_fail;
 
-	/* flush buffers on the device */
-	mce_sync_in(ir, NULL, maxp);
-	mce_sync_in(ir, NULL, maxp);
-
 	/* wire up inbound data handler */
 	usb_fill_int_urb(ir->urb_in, dev, pipe, ir->buf_in,
 		maxp, (usb_complete_t) mceusb_dev_recv, ir, ep_in->bInterval);
 	ir->urb_in->transfer_dma = ir->dma_in;
 	ir->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 
+	/* flush buffers on the device */
+	mce_dbg(&intf->dev, "Flushing receive buffers\n");
+	mce_flush_rx_buffer(ir, maxp);
+
 	/* initialize device */
 	if (ir->flags.microsoft_gen1)
 		mceusb_gen1_init(ir);
-- 
cgit v1.2.3


From e5fd0f7db3c3ba127dc1c51f0a0fe31d89db27cc Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Fri, 27 May 2011 15:37:23 -0300
Subject: [media] [staging] lirc_imon: fix unused-but-set warnings

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/staging/lirc/lirc_imon.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/drivers/staging/lirc/lirc_imon.c b/drivers/staging/lirc/lirc_imon.c
index 4039eda2a15b..4a9e563f40fa 100644
--- a/drivers/staging/lirc/lirc_imon.c
+++ b/drivers/staging/lirc/lirc_imon.c
@@ -672,8 +672,6 @@ static void imon_incoming_packet(struct imon_context *context,
 static void usb_rx_callback(struct urb *urb)
 {
 	struct imon_context *context;
-	unsigned char *buf;
-	int len;
 	int intfnum = 0;
 
 	if (!urb)
@@ -683,9 +681,6 @@ static void usb_rx_callback(struct urb *urb)
 	if (!context)
 		return;
 
-	buf = urb->transfer_buffer;
-	len = urb->actual_length;
-
 	switch (urb->status) {
 	case -ENOENT:		/* usbcore unlink successful! */
 		return;
@@ -728,7 +723,6 @@ static int imon_probe(struct usb_interface *interface,
 	int ir_ep_found = 0;
 	int alloc_status = 0;
 	int vfd_proto_6p = 0;
-	int code_length;
 	struct imon_context *context = NULL;
 	int i;
 	u16 vendor, product;
@@ -749,8 +743,6 @@ static int imon_probe(struct usb_interface *interface,
 	else
 		context->display = 1;
 
-	code_length = BUF_CHUNK_SIZE * 8;
-
 	usbdev     = usb_get_dev(interface_to_usbdev(interface));
 	iface_desc = interface->cur_altsetting;
 	num_endpts = iface_desc->desc.bNumEndpoints;
@@ -856,7 +848,7 @@ static int imon_probe(struct usb_interface *interface,
 
 	strcpy(driver->name, MOD_NAME);
 	driver->minor = -1;
-	driver->code_length = sizeof(int) * 8;
+	driver->code_length = BUF_CHUNK_SIZE * 8;
 	driver->sample_rate = 0;
 	driver->features = LIRC_CAN_REC_MODE2;
 	driver->data = context;
-- 
cgit v1.2.3


From 04f561ff8714c89733dcf1d178b64d100d5a084a Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Fri, 27 May 2011 15:46:19 -0300
Subject: [media] [staging] lirc_sir: fix unused-but-set warnings

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/staging/lirc/lirc_sir.c | 11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

diff --git a/drivers/staging/lirc/lirc_sir.c b/drivers/staging/lirc/lirc_sir.c
index a7b46f24f24e..0d3864594b12 100644
--- a/drivers/staging/lirc/lirc_sir.c
+++ b/drivers/staging/lirc/lirc_sir.c
@@ -739,23 +739,16 @@ static void send_space(unsigned long len)
 static void send_pulse(unsigned long len)
 {
 	long bytes_out = len / TIME_CONST;
-	long time_left;
 
-	time_left = (long)len - (long)bytes_out * (long)TIME_CONST;
-	if (bytes_out == 0) {
+	if (bytes_out == 0)
 		bytes_out++;
-		time_left = 0;
-	}
+
 	while (bytes_out--) {
 		outb(PULSE, io + UART_TX);
 		/* FIXME treba seriozne cakanie z char/serial.c */
 		while (!(inb(io + UART_LSR) & UART_LSR_THRE))
 			;
 	}
-#if 0
-	if (time_left > 0)
-		safe_udelay(time_left);
-#endif
 }
 #endif
 
-- 
cgit v1.2.3


From 8de111e27688798623b9e9062235bb0cac29f599 Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Fri, 27 May 2011 16:56:50 -0300
Subject: [media] lirc_dev: store cdev in irctl, up maxdevs

Store the cdev pointer in struct irctl, allocated dynamically as needed,
rather than having a static array. At the same time, recycle some of the
saved memory to nudge the maximum number of lirc devices supported up a
ways -- its not that uncommon these days, now that we have the rc-core
lirc bridge driver, to see a system with at least 4 raw IR receivers.
(consider a mythtv backend with several video capture devices and the
possible need for IR transmit hardware).

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/lirc_dev.c | 37 +++++++++++++++++++++++++++----------
 include/media/lirc_dev.h    |  2 +-
 2 files changed, 28 insertions(+), 11 deletions(-)

diff --git a/drivers/media/rc/lirc_dev.c b/drivers/media/rc/lirc_dev.c
index fd237ab120bb..27997a9ceb0d 100644
--- a/drivers/media/rc/lirc_dev.c
+++ b/drivers/media/rc/lirc_dev.c
@@ -55,6 +55,8 @@ struct irctl {
 	struct lirc_buffer *buf;
 	unsigned int chunk_size;
 
+	struct cdev *cdev;
+
 	struct task_struct *task;
 	long jiffies_to_wait;
 };
@@ -62,7 +64,6 @@ struct irctl {
 static DEFINE_MUTEX(lirc_dev_lock);
 
 static struct irctl *irctls[MAX_IRCTL_DEVICES];
-static struct cdev cdevs[MAX_IRCTL_DEVICES];
 
 /* Only used for sysfs but defined to void otherwise */
 static struct class *lirc_class;
@@ -167,9 +168,13 @@ static struct file_operations lirc_dev_fops = {
 
 static int lirc_cdev_add(struct irctl *ir)
 {
-	int retval;
+	int retval = -ENOMEM;
 	struct lirc_driver *d = &ir->d;
-	struct cdev *cdev = &cdevs[d->minor];
+	struct cdev *cdev;
+
+	cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
+	if (!cdev)
+		goto err_out;
 
 	if (d->fops) {
 		cdev_init(cdev, d->fops);
@@ -180,12 +185,20 @@ static int lirc_cdev_add(struct irctl *ir)
 	}
 	retval = kobject_set_name(&cdev->kobj, "lirc%d", d->minor);
 	if (retval)
-		return retval;
+		goto err_out;
 
 	retval = cdev_add(cdev, MKDEV(MAJOR(lirc_base_dev), d->minor), 1);
-	if (retval)
+	if (retval) {
 		kobject_put(&cdev->kobj);
+		goto err_out;
+	}
+
+	ir->cdev = cdev;
+
+	return 0;
 
+err_out:
+	kfree(cdev);
 	return retval;
 }
 
@@ -214,7 +227,7 @@ int lirc_register_driver(struct lirc_driver *d)
 	if (MAX_IRCTL_DEVICES <= d->minor) {
 		dev_err(d->dev, "lirc_dev: lirc_register_driver: "
 			"\"minor\" must be between 0 and %d (%d)!\n",
-			MAX_IRCTL_DEVICES-1, d->minor);
+			MAX_IRCTL_DEVICES - 1, d->minor);
 		err = -EBADRQC;
 		goto out;
 	}
@@ -369,7 +382,7 @@ int lirc_unregister_driver(int minor)
 
 	if (minor < 0 || minor >= MAX_IRCTL_DEVICES) {
 		printk(KERN_ERR "lirc_dev: %s: minor (%d) must be between "
-		       "0 and %d!\n", __func__, minor, MAX_IRCTL_DEVICES-1);
+		       "0 and %d!\n", __func__, minor, MAX_IRCTL_DEVICES - 1);
 		return -EBADRQC;
 	}
 
@@ -380,7 +393,7 @@ int lirc_unregister_driver(int minor)
 		return -ENOENT;
 	}
 
-	cdev = &cdevs[minor];
+	cdev = ir->cdev;
 
 	mutex_lock(&lirc_dev_lock);
 
@@ -410,6 +423,7 @@ int lirc_unregister_driver(int minor)
 	} else {
 		lirc_irctl_cleanup(ir);
 		cdev_del(cdev);
+		kfree(cdev);
 		kfree(ir);
 		irctls[minor] = NULL;
 	}
@@ -453,7 +467,7 @@ int lirc_dev_fop_open(struct inode *inode, struct file *file)
 		goto error;
 	}
 
-	cdev = &cdevs[iminor(inode)];
+	cdev = ir->cdev;
 	if (try_module_get(cdev->owner)) {
 		ir->open++;
 		retval = ir->d.set_use_inc(ir->d.data);
@@ -484,13 +498,15 @@ EXPORT_SYMBOL(lirc_dev_fop_open);
 int lirc_dev_fop_close(struct inode *inode, struct file *file)
 {
 	struct irctl *ir = irctls[iminor(inode)];
-	struct cdev *cdev = &cdevs[iminor(inode)];
+	struct cdev *cdev;
 
 	if (!ir) {
 		printk(KERN_ERR "%s: called with invalid irctl\n", __func__);
 		return -EINVAL;
 	}
 
+	cdev = ir->cdev;
+
 	dev_dbg(ir->d.dev, LOGHEAD "close called\n", ir->d.name, ir->d.minor);
 
 	WARN_ON(mutex_lock_killable(&lirc_dev_lock));
@@ -503,6 +519,7 @@ int lirc_dev_fop_close(struct inode *inode, struct file *file)
 		lirc_irctl_cleanup(ir);
 		cdev_del(cdev);
 		irctls[ir->d.minor] = NULL;
+		kfree(cdev);
 		kfree(ir);
 	}
 
diff --git a/include/media/lirc_dev.h b/include/media/lirc_dev.h
index 630e702c9511..168dd0b1bae2 100644
--- a/include/media/lirc_dev.h
+++ b/include/media/lirc_dev.h
@@ -9,7 +9,7 @@
 #ifndef _LINUX_LIRC_DEV_H
 #define _LINUX_LIRC_DEV_H
 
-#define MAX_IRCTL_DEVICES 4
+#define MAX_IRCTL_DEVICES 8
 #define BUFLEN            16
 
 #define mod(n, div) ((n) % (div))
-- 
cgit v1.2.3


From 0ae90252d0b28265bc16cf272e72d62281f7baf1 Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Fri, 27 May 2011 17:14:51 -0300
Subject: [media] fintek-cir: make suspend with active IR more reliable

There was a missing lock in fintek_suspend. Without the lock, its
possible the system will be in the middle of receiving IR (draining the
RX buffer) when we try to disable CIR interrupts.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/fintek-cir.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/media/rc/fintek-cir.c b/drivers/media/rc/fintek-cir.c
index 8fa539dde1b4..7f7079b12f23 100644
--- a/drivers/media/rc/fintek-cir.c
+++ b/drivers/media/rc/fintek-cir.c
@@ -597,12 +597,17 @@ static void __devexit fintek_remove(struct pnp_dev *pdev)
 static int fintek_suspend(struct pnp_dev *pdev, pm_message_t state)
 {
 	struct fintek_dev *fintek = pnp_get_drvdata(pdev);
+	unsigned long flags;
 
 	fit_dbg("%s called", __func__);
 
+	spin_lock_irqsave(&fintek->fintek_lock, flags);
+
 	/* disable all CIR interrupts */
 	fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS);
 
+	spin_unlock_irqrestore(&fintek->fintek_lock, flags);
+
 	fintek_config_mode_enable(fintek);
 
 	/* disable cir logical dev */
-- 
cgit v1.2.3


From 589e116062d8b5fd1809dfff4c9b7694ce6c2318 Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Tue, 24 May 2011 14:19:23 -0300
Subject: [media] nuvoton-cir: in_use isn't actually in use, remove it

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/nuvoton-cir.c | 2 --
 drivers/media/rc/nuvoton-cir.h | 1 -
 2 files changed, 3 deletions(-)

diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c
index bf3060ea6107..565f24c20d77 100644
--- a/drivers/media/rc/nuvoton-cir.c
+++ b/drivers/media/rc/nuvoton-cir.c
@@ -991,7 +991,6 @@ static int nvt_open(struct rc_dev *dev)
 	unsigned long flags;
 
 	spin_lock_irqsave(&nvt->nvt_lock, flags);
-	nvt->in_use = true;
 	nvt_enable_cir(nvt);
 	spin_unlock_irqrestore(&nvt->nvt_lock, flags);
 
@@ -1004,7 +1003,6 @@ static void nvt_close(struct rc_dev *dev)
 	unsigned long flags;
 
 	spin_lock_irqsave(&nvt->nvt_lock, flags);
-	nvt->in_use = false;
 	nvt_disable_cir(nvt);
 	spin_unlock_irqrestore(&nvt->nvt_lock, flags);
 }
diff --git a/drivers/media/rc/nuvoton-cir.h b/drivers/media/rc/nuvoton-cir.h
index 379795d61ea7..1241fc89a36c 100644
--- a/drivers/media/rc/nuvoton-cir.h
+++ b/drivers/media/rc/nuvoton-cir.h
@@ -70,7 +70,6 @@ struct nvt_dev {
 	struct ir_raw_event rawir;
 
 	spinlock_t nvt_lock;
-	bool in_use;
 
 	/* for rx */
 	u8 buf[RX_BUF_LEN];
-- 
cgit v1.2.3


From 0b43fcdff6495958c39e3575848edef4b685ddef Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Tue, 24 May 2011 16:44:54 -0300
Subject: [media] mceusb: plug memory leak on data transmit

Hans Petter Selasky pointed out to me that we're leaking urbs when
mce_async_out is called. Its used both for configuring the hardware and
for transmitting IR data. In the tx case, mce_request_packet actually
allocates both a urb and the transfer buffer, neither of which was being
torn down. Do that in the tx callback.

CC: Hans Petter Selasky <hselasky@c2i.net>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/mceusb.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index 6cf22012079a..06dfe0957b5e 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -621,6 +621,9 @@ static void mce_async_callback(struct urb *urb, struct pt_regs *regs)
 		mceusb_dev_printdata(ir, urb->transfer_buffer, 0, len, true);
 	}
 
+	/* the transfer buffer and urb were allocated in mce_request_packet */
+	kfree(urb->transfer_buffer);
+	usb_free_urb(urb);
 }
 
 /* request incoming or send outgoing usb packet - used to initialize remote */
-- 
cgit v1.2.3


From 443b391900469f2c5ec5a354ce305000096a94b7 Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Sat, 4 Jun 2011 14:00:54 -0300
Subject: [media] imon: support for 0x46 0xffdc imon vfd

Courtesy of information from Andreas Dick on the lirc list.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/imon.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index 3f3c70716268..43344fd67130 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -307,6 +307,14 @@ static const struct {
 	/* 0xffdc iMON MCE VFD */
 	{ 0x00010000ffffffeell, KEY_VOLUMEUP },
 	{ 0x01000000ffffffeell, KEY_VOLUMEDOWN },
+	{ 0x00000001ffffffeell, KEY_MUTE },
+	{ 0x0000000fffffffeell, KEY_MEDIA },
+	{ 0x00000012ffffffeell, KEY_UP },
+	{ 0x00000013ffffffeell, KEY_DOWN },
+	{ 0x00000014ffffffeell, KEY_LEFT },
+	{ 0x00000015ffffffeell, KEY_RIGHT },
+	{ 0x00000016ffffffeell, KEY_ENTER },
+	{ 0x00000017ffffffeell, KEY_ESC },
 	/* iMON Knob values */
 	{ 0x000100ffffffffeell, KEY_VOLUMEUP },
 	{ 0x010000ffffffffeell, KEY_VOLUMEDOWN },
@@ -1740,6 +1748,7 @@ static void imon_get_ffdc_type(struct imon_context *ictx)
 		detected_display_type = IMON_DISPLAY_TYPE_VFD;
 		break;
 	/* iMON VFD, MCE IR */
+	case 0x46:
 	case 0x9e:
 		dev_info(ictx->dev, "0xffdc iMON VFD, MCE IR");
 		detected_display_type = IMON_DISPLAY_TYPE_VFD;
-- 
cgit v1.2.3


From 94215ccd99eb6e3c8a035c06984630bd7479d963 Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Sat, 4 Jun 2011 14:14:41 -0300
Subject: [media] imon: fix initial panel key repeat suppression

As pointed out on the lirc list by Andreas Dick, initial panel key
repeat suppression wasn't working, as we had no timevals accumulated
until after the first repeat. Also add a missing locking call.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/imon.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index 43344fd67130..7136582a8573 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -1590,16 +1590,16 @@ static void imon_incoming_packet(struct imon_context *ictx,
 	/* Only panel type events left to process now */
 	spin_lock_irqsave(&ictx->kc_lock, flags);
 
+	do_gettimeofday(&t);
 	/* KEY_MUTE repeats from knob need to be suppressed */
 	if (ictx->kc == KEY_MUTE && ictx->kc == ictx->last_keycode) {
-		do_gettimeofday(&t);
 		msec = tv2int(&t, &prev_time);
-		prev_time = t;
 		if (msec < ictx->idev->rep[REP_DELAY]) {
 			spin_unlock_irqrestore(&ictx->kc_lock, flags);
 			return;
 		}
 	}
+	prev_time = t;
 	kc = ictx->kc;
 
 	spin_unlock_irqrestore(&ictx->kc_lock, flags);
@@ -1611,7 +1611,9 @@ static void imon_incoming_packet(struct imon_context *ictx,
 	input_report_key(ictx->idev, kc, 0);
 	input_sync(ictx->idev);
 
+	spin_lock_irqsave(&ictx->kc_lock, flags);
 	ictx->last_keycode = kc;
+	spin_unlock_irqrestore(&ictx->kc_lock, flags);
 
 	return;
 
-- 
cgit v1.2.3


From cfd77310a93aac6de7077335b2b73c19531043e4 Mon Sep 17 00:00:00 2001
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Thu, 2 Jun 2011 06:18:34 -0300
Subject: [media] s5p-fimc: Fix possible memory leak during capture devnode
 registration

Add missing kfree on the error path.

Reported-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/s5p-fimc/fimc-capture.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c
index d142b40ea64e..7e66455be0da 100644
--- a/drivers/media/video/s5p-fimc/fimc-capture.c
+++ b/drivers/media/video/s5p-fimc/fimc-capture.c
@@ -903,6 +903,7 @@ err_vd_reg:
 err_v4l2_reg:
 	v4l2_device_unregister(v4l2_dev);
 err_info:
+	kfree(ctx);
 	dev_err(&fimc->pdev->dev, "failed to install\n");
 	return ret;
 }
-- 
cgit v1.2.3


From 6ba8d13b0cff80ea6da18563fc2aa2cde2771be4 Mon Sep 17 00:00:00 2001
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Wed, 18 May 2011 14:14:56 -0300
Subject: [media] s5p-fimc: Fix V4L2_PIX_FMT_RGB565X description

Remove V4L2_MBUS_FMT_RGB565_2X8_BE media code entry as
camera interface supports only packed YUYV formats.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/s5p-fimc/fimc-core.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c
index dc91a8511af6..f1c7119c0977 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.c
+++ b/drivers/media/video/s5p-fimc/fimc-core.c
@@ -42,7 +42,6 @@ static struct fimc_fmt fimc_formats[] = {
 		.color		= S5P_FIMC_RGB565,
 		.memplanes	= 1,
 		.colplanes	= 1,
-		.mbus_code	= V4L2_MBUS_FMT_RGB565_2X8_BE,
 		.flags		= FMT_FLAGS_M2M,
 	}, {
 		.name		= "BGR666",
-- 
cgit v1.2.3


From 3495dcefeb3b5ab825788206d5b696be14f4de19 Mon Sep 17 00:00:00 2001
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Fri, 20 May 2011 06:14:59 -0300
Subject: [media] s5p-fimc: Fix data structures documentation and cleanup debug
 trace

Correct inconsistencies in data structures' documentation.
Remove meaningless debug traces.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/s5p-fimc/fimc-capture.c |  9 ---------
 drivers/media/video/s5p-fimc/fimc-core.c    |  6 ------
 drivers/media/video/s5p-fimc/fimc-core.h    | 25 ++++++++++++-------------
 3 files changed, 12 insertions(+), 28 deletions(-)

diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c
index 7e66455be0da..44fc26f5b05a 100644
--- a/drivers/media/video/s5p-fimc/fimc-capture.c
+++ b/drivers/media/video/s5p-fimc/fimc-capture.c
@@ -262,12 +262,7 @@ static unsigned int get_plane_size(struct fimc_frame *fr, unsigned int plane)
 {
 	if (!fr || plane >= fr->fmt->memplanes)
 		return 0;
-
-	dbg("%s: w: %d. h: %d. depth[%d]: %d",
-	    __func__, fr->width, fr->height, plane, fr->fmt->depth[plane]);
-
 	return fr->f_width * fr->f_height * fr->fmt->depth[plane] / 8;
-
 }
 
 static int queue_setup(struct vb2_queue *vq, unsigned int *num_buffers,
@@ -283,12 +278,8 @@ static int queue_setup(struct vb2_queue *vq, unsigned int *num_buffers,
 
 	*num_planes = fmt->memplanes;
 
-	dbg("%s, buffer count=%d, plane count=%d",
-	    __func__, *num_buffers, *num_planes);
-
 	for (i = 0; i < fmt->memplanes; i++) {
 		sizes[i] = get_plane_size(&ctx->d_frame, i);
-		dbg("plane: %u, plane_size: %lu", i, sizes[i]);
 		allocators[i] = ctx->fimc_dev->alloc_ctx;
 	}
 
diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c
index f1c7119c0977..c427edd3cd5e 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.c
+++ b/drivers/media/video/s5p-fimc/fimc-core.c
@@ -231,11 +231,7 @@ static int fimc_get_scaler_factor(u32 src, u32 tar, u32 *ratio, u32 *shift)
 			return 0;
 		}
 	}
-
 	*shift = 0, *ratio = 1;
-
-	dbg("s: %d, t: %d, shift: %d, ratio: %d",
-	    src, tar, *shift, *ratio);
 	return 0;
 }
 
@@ -267,10 +263,8 @@ int fimc_set_scaler_info(struct fimc_ctx *ctx)
 		err("invalid source size: %d x %d", sx, sy);
 		return -EINVAL;
 	}
-
 	sc->real_width = sx;
 	sc->real_height = sy;
-	dbg("sx= %d, sy= %d, tx= %d, ty= %d", sx, sy, tx, ty);
 
 	ret = fimc_get_scaler_factor(sx, tx, &sc->pre_hratio, &sc->hfactor);
 	if (ret)
diff --git a/drivers/media/video/s5p-fimc/fimc-core.h b/drivers/media/video/s5p-fimc/fimc-core.h
index 3beb1e5320ce..8f0f168a9ac3 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.h
+++ b/drivers/media/video/s5p-fimc/fimc-core.h
@@ -135,9 +135,10 @@ enum fimc_color_fmt {
  * @name: format description
  * @fourcc: the fourcc code for this format, 0 if not applicable
  * @color: the corresponding fimc_color_fmt
- * @depth: per plane driver's private 'number of bits per pixel'
  * @memplanes: number of physically non-contiguous data planes
  * @colplanes: number of physically contiguous data planes
+ * @depth: per plane driver's private 'number of bits per pixel'
+ * @flags: flags indicating which operation mode format applies to
  */
 struct fimc_fmt {
 	enum v4l2_mbus_pixelcode mbus_code;
@@ -171,7 +172,7 @@ struct fimc_dma_offset {
 };
 
 /**
- * struct fimc_effect - the configuration data for the "Arbitrary" image effect
+ * struct fimc_effect - color effect information
  * @type:	effect type
  * @pat_cb:	cr value when type is "arbitrary"
  * @pat_cr:	cr value when type is "arbitrary"
@@ -184,7 +185,6 @@ struct fimc_effect {
 
 /**
  * struct fimc_scaler - the configuration data for FIMC inetrnal scaler
- *
  * @scaleup_h:		flag indicating scaling up horizontally
  * @scaleup_v:		flag indicating scaling up vertically
  * @copy_mode:		flag indicating transparent DMA transfer (no scaling
@@ -220,7 +220,6 @@ struct fimc_scaler {
 
 /**
  * struct fimc_addr - the FIMC physical address set for DMA
- *
  * @y:	 luminance plane physical address
  * @cb:	 Cb plane physical address
  * @cr:	 Cr plane physical address
@@ -234,6 +233,7 @@ struct fimc_addr {
 /**
  * struct fimc_vid_buffer - the driver's video buffer
  * @vb:    v4l videobuf buffer
+ * @list:  linked list structure for buffer queue
  * @paddr: precalculated physical address set
  * @index: buffer index for the output DMA engine
  */
@@ -254,11 +254,10 @@ struct fimc_vid_buffer {
  * @offs_v:	image vertical pixel offset
  * @width:	image pixel width
  * @height:	image pixel weight
- * @paddr:	image frame buffer physical addresses
- * @buf_cnt:	number of buffers depending on a color format
  * @payload:	image size in bytes (w x h x bpp)
- * @color:	color format
+ * @paddr:	image frame buffer physical addresses
  * @dma_offset:	DMA offset in bytes
+ * @fmt:	fimc color format pointer
  */
 struct fimc_frame {
 	u32	f_width;
@@ -390,21 +389,22 @@ struct fimc_ctx;
 
 /**
  * struct fimc_dev - abstraction for FIMC entity
- *
  * @slock:	the spinlock protecting this data structure
  * @lock:	the mutex protecting this data structure
  * @pdev:	pointer to the FIMC platform device
  * @pdata:	pointer to the device platform data
+ * @variant:	the IP variant information
  * @id:		FIMC device index (0..FIMC_MAX_DEVS)
  * @num_clocks: the number of clocks managed by this device instance
- * @clock[]:	the clocks required for FIMC operation
+ * @clock:	clocks required for FIMC operation
  * @regs:	the mapped hardware registers
  * @regs_res:	the resource claimed for IO registers
- * @irq:	interrupt number of the FIMC subdevice
- * @irq_queue:
+ * @irq:	FIMC interrupt number
+ * @irq_queue:	interrupt handler waitqueue
  * @m2m:	memory-to-memory V4L2 device information
  * @vid_cap:	camera capture device information
  * @state:	flags used to synchronize m2m and capture mode operation
+ * @alloc_ctx:	videobuf2 memory allocator context
  */
 struct fimc_dev {
 	spinlock_t			slock;
@@ -427,8 +427,7 @@ struct fimc_dev {
 
 /**
  * fimc_ctx - the device context data
- *
- * @lock:		mutex protecting this data structure
+ * @slock:		spinlock protecting this data structure
  * @s_frame:		source frame properties
  * @d_frame:		destination frame properties
  * @out_order_1p:	output 1-plane YCBCR order
-- 
cgit v1.2.3


From a629f86b4aa1669ddf2afaa3ded66d5a59d60b77 Mon Sep 17 00:00:00 2001
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Mon, 23 May 2011 09:15:05 -0300
Subject: [media] s5p-fimc: Fix wrong buffer size in queue_setup

Avoid dereferencing of NULL f->fmt. Correct size of the allocated
buffer in case the crop rectangle is smaller than the bounds
rectangle (configured with S_FMT). Also remove redundant check
for *num_buffer == 0 as this case is handled in videobuf2.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/s5p-fimc/fimc-core.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c
index c427edd3cd5e..85b47a328a5d 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.c
+++ b/drivers/media/video/s5p-fimc/fimc-core.c
@@ -704,22 +704,18 @@ static int fimc_queue_setup(struct vb2_queue *vq, unsigned int *num_buffers,
 	f = ctx_get_frame(ctx, vq->type);
 	if (IS_ERR(f))
 		return PTR_ERR(f);
-
 	/*
 	 * Return number of non-contigous planes (plane buffers)
 	 * depending on the configured color format.
 	 */
-	if (f->fmt)
-		*num_planes = f->fmt->memplanes;
+	if (!f->fmt)
+		return -EINVAL;
 
+	*num_planes = f->fmt->memplanes;
 	for (i = 0; i < f->fmt->memplanes; i++) {
-		sizes[i] = (f->width * f->height * f->fmt->depth[i]) >> 3;
+		sizes[i] = (f->f_width * f->f_height * f->fmt->depth[i]) / 8;
 		allocators[i] = ctx->fimc_dev->alloc_ctx;
 	}
-
-	if (*num_buffers == 0)
-		*num_buffers = 1;
-
 	return 0;
 }
 
-- 
cgit v1.2.3


From dbdd0dfb89ca45895f2063db8b31085cf32aa81d Mon Sep 17 00:00:00 2001
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Mon, 23 May 2011 09:15:17 -0300
Subject: [media] s5p-fimc: Remove empty buf_init operation

The buf_init buffer queue operation is optional and
buffer_init() does nothing, remove it.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/s5p-fimc/fimc-capture.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c
index 44fc26f5b05a..69016436fffc 100644
--- a/drivers/media/video/s5p-fimc/fimc-capture.c
+++ b/drivers/media/video/s5p-fimc/fimc-capture.c
@@ -286,12 +286,6 @@ static int queue_setup(struct vb2_queue *vq, unsigned int *num_buffers,
 	return 0;
 }
 
-static int buffer_init(struct vb2_buffer *vb)
-{
-	/* TODO: */
-	return 0;
-}
-
 static int buffer_prepare(struct vb2_buffer *vb)
 {
 	struct vb2_queue *vq = vb->vb2_queue;
@@ -371,7 +365,6 @@ static struct vb2_ops fimc_capture_qops = {
 	.queue_setup		= queue_setup,
 	.buf_prepare		= buffer_prepare,
 	.buf_queue		= buffer_queue,
-	.buf_init		= buffer_init,
 	.wait_prepare		= fimc_unlock,
 	.wait_finish		= fimc_lock,
 	.start_streaming	= start_streaming,
-- 
cgit v1.2.3


From ba0545e328390b9e5589c14876b3940fbe647d0c Mon Sep 17 00:00:00 2001
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Fri, 20 May 2011 14:02:11 -0300
Subject: [media] s5p-fimc: Use pix_mp for the color format lookup

With multi-planar formats fmt.pix_mp member of struct v4l2_format
should be used rather than fmt.pix. Fix find_fmt() function to do
the right thing.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/s5p-fimc/fimc-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c
index 85b47a328a5d..873a879dc770 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.c
+++ b/drivers/media/video/s5p-fimc/fimc-core.c
@@ -841,7 +841,7 @@ struct fimc_fmt *find_format(struct v4l2_format *f, unsigned int mask)
 
 	for (i = 0; i < ARRAY_SIZE(fimc_formats); ++i) {
 		fmt = &fimc_formats[i];
-		if (fmt->fourcc == f->fmt.pix.pixelformat &&
+		if (fmt->fourcc == f->fmt.pix_mp.pixelformat &&
 		   (fmt->flags & mask))
 			break;
 	}
-- 
cgit v1.2.3


From 3a3f94497aa236d9a4f47f0f4f8dc84e531ffa22 Mon Sep 17 00:00:00 2001
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Thu, 28 Apr 2011 09:06:19 -0300
Subject: [media] s5p-fimc: Update copyright notices

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/s5p-fimc/fimc-capture.c | 4 ++--
 drivers/media/video/s5p-fimc/fimc-core.c    | 7 +++----
 drivers/media/video/s5p-fimc/fimc-core.h    | 4 +---
 3 files changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c
index 69016436fffc..81b4a826ee5e 100644
--- a/drivers/media/video/s5p-fimc/fimc-capture.c
+++ b/drivers/media/video/s5p-fimc/fimc-capture.c
@@ -1,7 +1,7 @@
 /*
- * Samsung S5P SoC series camera interface (camera capture) driver
+ * Samsung S5P/EXYNOS4 SoC series camera interface (camera capture) driver
  *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd
+ * Copyright (C) 2010 - 2011 Samsung Electronics Co., Ltd.
  * Author: Sylwester Nawrocki, <s.nawrocki@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c
index 873a879dc770..bdf19ada9172 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.c
+++ b/drivers/media/video/s5p-fimc/fimc-core.c
@@ -1,9 +1,8 @@
 /*
- * S5P camera interface (video postprocessor) driver
+ * Samsung S5P/EXYNOS4 SoC series camera interface (video postprocessor) driver
  *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd
- *
- * Sylwester Nawrocki, <s.nawrocki@samsung.com>
+ * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd.
+ * Contact: Sylwester Nawrocki, <s.nawrocki@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published
diff --git a/drivers/media/video/s5p-fimc/fimc-core.h b/drivers/media/video/s5p-fimc/fimc-core.h
index 8f0f168a9ac3..1f70772daaf0 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.h
+++ b/drivers/media/video/s5p-fimc/fimc-core.h
@@ -1,7 +1,5 @@
 /*
- * Copyright (c) 2010 Samsung Electronics
- *
- * Sylwester Nawrocki, <s.nawrocki@samsung.com>
+ * Copyright (C) 2010 - 2011 Samsung Electronics Co., Ltd.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
-- 
cgit v1.2.3


From bbe66edc607425acc47d7ad69ba7ad7193ec05b4 Mon Sep 17 00:00:00 2001
From: "HeungJun, Kim" <riverful.kim@samsung.com>
Date: Tue, 31 May 2011 02:27:53 -0300
Subject: [media] m5mols: Fix capture image size register definition

The main capture and the thumbnail image size registers were
erroneously defined to have 1 byte width, resulting in wrong
reported image size. Fix this by changing the registers width
to correct value.

Reported-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/m5mols/m5mols_reg.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/video/m5mols/m5mols_reg.h b/drivers/media/video/m5mols/m5mols_reg.h
index b83e36fc6ac6..8260f5030c7e 100644
--- a/drivers/media/video/m5mols/m5mols_reg.h
+++ b/drivers/media/video/m5mols/m5mols_reg.h
@@ -382,8 +382,8 @@
 #define REG_CAP_START_MAIN	0x01
 #define REG_CAP_START_THUMB	0x03
 
-#define CAPC_IMAGE_SIZE		I2C_REG(CAT_CAPT_CTRL, CATC_CAP_IMAGE_SIZE, 1)
-#define CAPC_THUMB_SIZE		I2C_REG(CAT_CAPT_CTRL, CATC_CAP_THUMB_SIZE, 1)
+#define CAPC_IMAGE_SIZE		I2C_REG(CAT_CAPT_CTRL, CATC_CAP_IMAGE_SIZE, 4)
+#define CAPC_THUMB_SIZE		I2C_REG(CAT_CAPT_CTRL, CATC_CAP_THUMB_SIZE, 4)
 
 /*
  * Category F - Flash
-- 
cgit v1.2.3


From 57644f56234a154afffd0f4d53becf8ff4a55b41 Mon Sep 17 00:00:00 2001
From: "HeungJun, Kim" <riverful.kim@samsung.com>
Date: Tue, 31 May 2011 03:44:19 -0300
Subject: [media] m5mols: add m5mols_read_u8/u16/u32() according to I2C byte
 width

For now, the m5mols_read() share in case of I2C packet 1, 2, 4 byte(s) width.
So, this commit adds 3 functions - m5mols_read_u8/u16/u32() according to byte
width of I2C packet. And, the u32 variables in spite of u8 or u16 for fitting
to m5mols_read() having no choice, is replaced to have original byte width
like u8, u16, u32 as same reason.

Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/m5mols/m5mols.h          | 52 +++++++--------
 drivers/media/video/m5mols/m5mols_capture.c  | 18 +++---
 drivers/media/video/m5mols/m5mols_controls.c |  2 +-
 drivers/media/video/m5mols/m5mols_core.c     | 96 +++++++++++++++++++---------
 4 files changed, 104 insertions(+), 64 deletions(-)

diff --git a/drivers/media/video/m5mols/m5mols.h b/drivers/media/video/m5mols/m5mols.h
index 10b55c854487..dbe8928855de 100644
--- a/drivers/media/video/m5mols/m5mols.h
+++ b/drivers/media/video/m5mols/m5mols.h
@@ -106,23 +106,23 @@ struct m5mols_capture {
  * The each value according to each scenemode is recommended in the documents.
  */
 struct m5mols_scenemode {
-	u32 metering;
-	u32 ev_bias;
-	u32 wb_mode;
-	u32 wb_preset;
-	u32 chroma_en;
-	u32 chroma_lvl;
-	u32 edge_en;
-	u32 edge_lvl;
-	u32 af_range;
-	u32 fd_mode;
-	u32 mcc;
-	u32 light;
-	u32 flash;
-	u32 tone;
-	u32 iso;
-	u32 capt_mode;
-	u32 wdr;
+	u8 metering;
+	u8 ev_bias;
+	u8 wb_mode;
+	u8 wb_preset;
+	u8 chroma_en;
+	u8 chroma_lvl;
+	u8 edge_en;
+	u8 edge_lvl;
+	u8 af_range;
+	u8 fd_mode;
+	u8 mcc;
+	u8 light;
+	u8 flash;
+	u8 tone;
+	u8 iso;
+	u8 capt_mode;
+	u8 wdr;
 };
 
 /**
@@ -216,9 +216,9 @@ struct m5mols_info {
 	bool lock_ae;
 	bool lock_awb;
 	u8 resolution;
-	u32 interrupt;
-	u32 mode;
-	u32 mode_save;
+	u8 interrupt;
+	u8 mode;
+	u8 mode_save;
 	int (*set_power)(struct device *dev, int on);
 };
 
@@ -256,9 +256,11 @@ struct m5mols_info {
  *   +-------+---+----------+-----+------+------+------+------+
  *   - d[0..3]: according to size1
  */
-int m5mols_read(struct v4l2_subdev *sd, u32 reg_comb, u32 *val);
+int m5mols_read_u8(struct v4l2_subdev *sd, u32 reg_comb, u8 *val);
+int m5mols_read_u16(struct v4l2_subdev *sd, u32 reg_comb, u16 *val);
+int m5mols_read_u32(struct v4l2_subdev *sd, u32 reg_comb, u32 *val);
 int m5mols_write(struct v4l2_subdev *sd, u32 reg_comb, u32 val);
-int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u32 value);
+int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u8 value);
 
 /*
  * Mode operation of the M-5MOLS
@@ -280,12 +282,12 @@ int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u32 value);
  * The available executing order between each modes are as follows:
  *   PARAMETER <---> MONITOR <---> CAPTURE
  */
-int m5mols_mode(struct m5mols_info *info, u32 mode);
+int m5mols_mode(struct m5mols_info *info, u8 mode);
 
-int m5mols_enable_interrupt(struct v4l2_subdev *sd, u32 reg);
+int m5mols_enable_interrupt(struct v4l2_subdev *sd, u8 reg);
 int m5mols_sync_controls(struct m5mols_info *info);
 int m5mols_start_capture(struct m5mols_info *info);
-int m5mols_do_scenemode(struct m5mols_info *info, u32 mode);
+int m5mols_do_scenemode(struct m5mols_info *info, u8 mode);
 int m5mols_lock_3a(struct m5mols_info *info, bool lock);
 int m5mols_set_ctrl(struct v4l2_ctrl *ctrl);
 
diff --git a/drivers/media/video/m5mols/m5mols_capture.c b/drivers/media/video/m5mols/m5mols_capture.c
index d71a3903b60f..751f4593da9b 100644
--- a/drivers/media/video/m5mols/m5mols_capture.c
+++ b/drivers/media/video/m5mols/m5mols_capture.c
@@ -58,9 +58,9 @@ static int m5mols_read_rational(struct v4l2_subdev *sd, u32 addr_num,
 {
 	u32 num, den;
 
-	int ret = m5mols_read(sd, addr_num, &num);
+	int ret = m5mols_read_u32(sd, addr_num, &num);
 	if (!ret)
-		ret = m5mols_read(sd, addr_den, &den);
+		ret = m5mols_read_u32(sd, addr_den, &den);
 	if (ret)
 		return ret;
 	*val = den == 0 ? 0 : num / den;
@@ -99,20 +99,20 @@ static int m5mols_capture_info(struct m5mols_info *info)
 	if (ret)
 		return ret;
 
-	ret = m5mols_read(sd, EXIF_INFO_ISO, (u32 *)&exif->iso_speed);
+	ret = m5mols_read_u16(sd, EXIF_INFO_ISO, &exif->iso_speed);
 	if (!ret)
-		ret = m5mols_read(sd, EXIF_INFO_FLASH, (u32 *)&exif->flash);
+		ret = m5mols_read_u16(sd, EXIF_INFO_FLASH, &exif->flash);
 	if (!ret)
-		ret = m5mols_read(sd, EXIF_INFO_SDR, (u32 *)&exif->sdr);
+		ret = m5mols_read_u16(sd, EXIF_INFO_SDR, &exif->sdr);
 	if (!ret)
-		ret = m5mols_read(sd, EXIF_INFO_QVAL, (u32 *)&exif->qval);
+		ret = m5mols_read_u16(sd, EXIF_INFO_QVAL, &exif->qval);
 	if (ret)
 		return ret;
 
 	if (!ret)
-		ret = m5mols_read(sd, CAPC_IMAGE_SIZE, &info->cap.main);
+		ret = m5mols_read_u32(sd, CAPC_IMAGE_SIZE, &info->cap.main);
 	if (!ret)
-		ret = m5mols_read(sd, CAPC_THUMB_SIZE, &info->cap.thumb);
+		ret = m5mols_read_u32(sd, CAPC_THUMB_SIZE, &info->cap.thumb);
 	if (!ret)
 		info->cap.total = info->cap.main + info->cap.thumb;
 
@@ -122,7 +122,7 @@ static int m5mols_capture_info(struct m5mols_info *info)
 int m5mols_start_capture(struct m5mols_info *info)
 {
 	struct v4l2_subdev *sd = &info->sd;
-	u32 resolution = info->resolution;
+	u8 resolution = info->resolution;
 	int timeout;
 	int ret;
 
diff --git a/drivers/media/video/m5mols/m5mols_controls.c b/drivers/media/video/m5mols/m5mols_controls.c
index 817c16fec368..d392c83fbf05 100644
--- a/drivers/media/video/m5mols/m5mols_controls.c
+++ b/drivers/media/video/m5mols/m5mols_controls.c
@@ -130,7 +130,7 @@ static struct m5mols_scenemode m5mols_default_scenemode[] = {
  *
  * WARNING: The execution order is important. Do not change the order.
  */
-int m5mols_do_scenemode(struct m5mols_info *info, u32 mode)
+int m5mols_do_scenemode(struct m5mols_info *info, u8 mode)
 {
 	struct v4l2_subdev *sd = &info->sd;
 	struct m5mols_scenemode scenemode = m5mols_default_scenemode[mode];
diff --git a/drivers/media/video/m5mols/m5mols_core.c b/drivers/media/video/m5mols/m5mols_core.c
index 76eac26e84ae..2b1f23f8d063 100644
--- a/drivers/media/video/m5mols/m5mols_core.c
+++ b/drivers/media/video/m5mols/m5mols_core.c
@@ -133,13 +133,13 @@ static u32 m5mols_swap_byte(u8 *data, u8 length)
 /**
  * m5mols_read -  I2C read function
  * @reg: combination of size, category and command for the I2C packet
+ * @size: desired size of I2C packet
  * @val: read value
  */
-int m5mols_read(struct v4l2_subdev *sd, u32 reg, u32 *val)
+static int m5mols_read(struct v4l2_subdev *sd, u32 size, u32 reg, u32 *val)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 	u8 rbuf[M5MOLS_I2C_MAX_SIZE + 1];
-	u8 size = I2C_SIZE(reg);
 	u8 category = I2C_CATEGORY(reg);
 	u8 cmd = I2C_COMMAND(reg);
 	struct i2c_msg msg[2];
@@ -149,11 +149,6 @@ int m5mols_read(struct v4l2_subdev *sd, u32 reg, u32 *val)
 	if (!client->adapter)
 		return -ENODEV;
 
-	if (size != 1 && size != 2 && size != 4) {
-		v4l2_err(sd, "Wrong data size\n");
-		return -EINVAL;
-	}
-
 	msg[0].addr = client->addr;
 	msg[0].flags = 0;
 	msg[0].len = 5;
@@ -184,6 +179,52 @@ int m5mols_read(struct v4l2_subdev *sd, u32 reg, u32 *val)
 	return 0;
 }
 
+int m5mols_read_u8(struct v4l2_subdev *sd, u32 reg, u8 *val)
+{
+	u32 val_32;
+	int ret;
+
+	if (I2C_SIZE(reg) != 1) {
+		v4l2_err(sd, "Wrong data size\n");
+		return -EINVAL;
+	}
+
+	ret = m5mols_read(sd, I2C_SIZE(reg), reg, &val_32);
+	if (ret)
+		return ret;
+
+	*val = (u8)val_32;
+	return ret;
+}
+
+int m5mols_read_u16(struct v4l2_subdev *sd, u32 reg, u16 *val)
+{
+	u32 val_32;
+	int ret;
+
+	if (I2C_SIZE(reg) != 2) {
+		v4l2_err(sd, "Wrong data size\n");
+		return -EINVAL;
+	}
+
+	ret = m5mols_read(sd, I2C_SIZE(reg), reg, &val_32);
+	if (ret)
+		return ret;
+
+	*val = (u16)val_32;
+	return ret;
+}
+
+int m5mols_read_u32(struct v4l2_subdev *sd, u32 reg, u32 *val)
+{
+	if (I2C_SIZE(reg) != 4) {
+		v4l2_err(sd, "Wrong data size\n");
+		return -EINVAL;
+	}
+
+	return m5mols_read(sd, I2C_SIZE(reg), reg, val);
+}
+
 /**
  * m5mols_write - I2C command write function
  * @reg: combination of size, category and command for the I2C packet
@@ -231,13 +272,14 @@ int m5mols_write(struct v4l2_subdev *sd, u32 reg, u32 val)
 	return 0;
 }
 
-int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u32 mask)
+int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u8 mask)
 {
-	u32 busy, i;
+	u8 busy;
+	int i;
 	int ret;
 
 	for (i = 0; i < M5MOLS_I2C_CHECK_RETRY; i++) {
-		ret = m5mols_read(sd, I2C_REG(category, cmd, 1), &busy);
+		ret = m5mols_read_u8(sd, I2C_REG(category, cmd, 1), &busy);
 		if (ret < 0)
 			return ret;
 		if ((busy & mask) == mask)
@@ -252,14 +294,14 @@ int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u32 mask)
  * Before writing desired interrupt value the INT_FACTOR register should
  * be read to clear pending interrupts.
  */
-int m5mols_enable_interrupt(struct v4l2_subdev *sd, u32 reg)
+int m5mols_enable_interrupt(struct v4l2_subdev *sd, u8 reg)
 {
 	struct m5mols_info *info = to_m5mols(sd);
-	u32 mask = is_available_af(info) ? REG_INT_AF : 0;
-	u32 dummy;
+	u8 mask = is_available_af(info) ? REG_INT_AF : 0;
+	u8 dummy;
 	int ret;
 
-	ret = m5mols_read(sd, SYSTEM_INT_FACTOR, &dummy);
+	ret = m5mols_read_u8(sd, SYSTEM_INT_FACTOR, &dummy);
 	if (!ret)
 		ret = m5mols_write(sd, SYSTEM_INT_ENABLE, reg & ~mask);
 	return ret;
@@ -271,7 +313,7 @@ int m5mols_enable_interrupt(struct v4l2_subdev *sd, u32 reg)
  * It always accompanies a little delay changing the M-5MOLS mode, so it is
  * needed checking current busy status to guarantee right mode.
  */
-static int m5mols_reg_mode(struct v4l2_subdev *sd, u32 mode)
+static int m5mols_reg_mode(struct v4l2_subdev *sd, u8 mode)
 {
 	int ret = m5mols_write(sd, SYSTEM_SYSMODE, mode);
 
@@ -286,16 +328,16 @@ static int m5mols_reg_mode(struct v4l2_subdev *sd, u32 mode)
  * can be guaranteed only when the sensor is operating in mode which which
  * a command belongs to.
  */
-int m5mols_mode(struct m5mols_info *info, u32 mode)
+int m5mols_mode(struct m5mols_info *info, u8 mode)
 {
 	struct v4l2_subdev *sd = &info->sd;
 	int ret = -EINVAL;
-	u32 reg;
+	u8 reg;
 
 	if (mode < REG_PARAMETER && mode > REG_CAPTURE)
 		return ret;
 
-	ret = m5mols_read(sd, SYSTEM_SYSMODE, &reg);
+	ret = m5mols_read_u8(sd, SYSTEM_SYSMODE, &reg);
 	if ((!ret && reg == mode) || ret)
 		return ret;
 
@@ -348,28 +390,24 @@ static int m5mols_get_version(struct v4l2_subdev *sd)
 		struct m5mols_version ver;
 		u8 bytes[VERSION_SIZE];
 	} version;
-	u32 *value;
 	u8 cmd = CAT0_VER_CUSTOMER;
 	int ret;
 
 	do {
-		value = (u32 *)&version.bytes[cmd];
-		ret = m5mols_read(sd, SYSTEM_CMD(cmd), value);
+		ret = m5mols_read_u8(sd, SYSTEM_CMD(cmd), &version.bytes[cmd]);
 		if (ret)
 			return ret;
 	} while (cmd++ != CAT0_VER_AWB);
 
 	do {
-		value = (u32 *)&version.bytes[cmd];
-		ret = m5mols_read(sd, SYSTEM_VER_STRING, value);
+		ret = m5mols_read_u8(sd, SYSTEM_VER_STRING, &version.bytes[cmd]);
 		if (ret)
 			return ret;
 		if (cmd >= VERSION_SIZE - 1)
 			return -EINVAL;
 	} while (version.bytes[cmd++]);
 
-	value = (u32 *)&version.bytes[cmd];
-	ret = m5mols_read(sd, AF_VERSION, value);
+	ret = m5mols_read_u8(sd, AF_VERSION, &version.bytes[cmd]);
 	if (ret)
 		return ret;
 
@@ -722,7 +760,7 @@ static int m5mols_init_controls(struct m5mols_info *info)
 	int ret;
 
 	/* Determine value's range & step of controls for various FW version */
-	ret = m5mols_read(sd, AE_MAX_GAIN_MON, (u32 *)&max_exposure);
+	ret = m5mols_read_u16(sd, AE_MAX_GAIN_MON, &max_exposure);
 	if (!ret)
 		step_zoom = is_manufacturer(info, REG_SAMSUNG_OPTICS) ? 31 : 1;
 	if (ret)
@@ -842,18 +880,18 @@ static void m5mols_irq_work(struct work_struct *work)
 	struct m5mols_info *info =
 		container_of(work, struct m5mols_info, work_irq);
 	struct v4l2_subdev *sd = &info->sd;
-	u32 reg;
+	u8 reg;
 	int ret;
 
 	if (!is_powered(info) ||
-			m5mols_read(sd, SYSTEM_INT_FACTOR, &info->interrupt))
+			m5mols_read_u8(sd, SYSTEM_INT_FACTOR, &info->interrupt))
 		return;
 
 	switch (info->interrupt & REG_INT_MASK) {
 	case REG_INT_AF:
 		if (!is_available_af(info))
 			break;
-		ret = m5mols_read(sd, AF_STATUS, &reg);
+		ret = m5mols_read_u8(sd, AF_STATUS, &reg);
 		v4l2_dbg(2, m5mols_debug, sd, "AF %s\n",
 			 reg == REG_AF_FAIL ? "Failed" :
 			 reg == REG_AF_SUCCESS ? "Success" :
-- 
cgit v1.2.3


From a6354d2e5da646926ce492b66b527a1efc39cd27 Mon Sep 17 00:00:00 2001
From: "HeungJun, Kim" <riverful.kim@samsung.com>
Date: Tue, 7 Jun 2011 01:59:44 -0300
Subject: [media] m5mols: remove union in the m5mols_get_version(), and
 VERSION_SIZE

Remove union version in the m5mols_get_version(), and read version information
directly. Also remove VERSION_SIZE.

Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/m5mols/m5mols.h      |  1 -
 drivers/media/video/m5mols/m5mols_core.c | 50 ++++++++++++++++----------------
 drivers/media/video/m5mols/m5mols_reg.h  | 13 ++++++++-
 3 files changed, 37 insertions(+), 27 deletions(-)

diff --git a/drivers/media/video/m5mols/m5mols.h b/drivers/media/video/m5mols/m5mols.h
index dbe8928855de..9ae170935871 100644
--- a/drivers/media/video/m5mols/m5mols.h
+++ b/drivers/media/video/m5mols/m5mols.h
@@ -154,7 +154,6 @@ struct m5mols_version {
 	u8	str[VERSION_STRING_SIZE];
 	u8	af;
 };
-#define VERSION_SIZE sizeof(struct m5mols_version)
 
 /**
  * struct m5mols_info - M-5MOLS driver data structure
diff --git a/drivers/media/video/m5mols/m5mols_core.c b/drivers/media/video/m5mols/m5mols_core.c
index 2b1f23f8d063..9815f2c75e83 100644
--- a/drivers/media/video/m5mols/m5mols_core.c
+++ b/drivers/media/video/m5mols/m5mols_core.c
@@ -386,37 +386,37 @@ int m5mols_mode(struct m5mols_info *info, u8 mode)
 static int m5mols_get_version(struct v4l2_subdev *sd)
 {
 	struct m5mols_info *info = to_m5mols(sd);
-	union {
-		struct m5mols_version ver;
-		u8 bytes[VERSION_SIZE];
-	} version;
-	u8 cmd = CAT0_VER_CUSTOMER;
+	struct m5mols_version *ver = &info->ver;
+	u8 *str = ver->str;
+	int i;
 	int ret;
 
-	do {
-		ret = m5mols_read_u8(sd, SYSTEM_CMD(cmd), &version.bytes[cmd]);
-		if (ret)
-			return ret;
-	} while (cmd++ != CAT0_VER_AWB);
+	ret = m5mols_read_u8(sd, SYSTEM_VER_CUSTOMER, &ver->customer);
+	if (!ret)
+		ret = m5mols_read_u8(sd, SYSTEM_VER_PROJECT, &ver->project);
+	if (!ret)
+		ret = m5mols_read_u16(sd, SYSTEM_VER_FIRMWARE, &ver->fw);
+	if (!ret)
+		ret = m5mols_read_u16(sd, SYSTEM_VER_HARDWARE, &ver->hw);
+	if (!ret)
+		ret = m5mols_read_u16(sd, SYSTEM_VER_PARAMETER, &ver->param);
+	if (!ret)
+		ret = m5mols_read_u16(sd, SYSTEM_VER_AWB, &ver->awb);
+	if (!ret)
+		ret = m5mols_read_u8(sd, AF_VERSION, &ver->af);
+	if (ret)
+		return ret;
 
-	do {
-		ret = m5mols_read_u8(sd, SYSTEM_VER_STRING, &version.bytes[cmd]);
+	for (i = 0; i < VERSION_STRING_SIZE; i++) {
+		ret = m5mols_read_u8(sd, SYSTEM_VER_STRING, &str[i]);
 		if (ret)
 			return ret;
-		if (cmd >= VERSION_SIZE - 1)
-			return -EINVAL;
-	} while (version.bytes[cmd++]);
-
-	ret = m5mols_read_u8(sd, AF_VERSION, &version.bytes[cmd]);
-	if (ret)
-		return ret;
+	}
 
-	/* st