| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Test that user namespace as a child also propagates correctly.
Create user_A -> user_B, verify when user_B is active that user_A
is also active. This is different from non-user namespace children.
Link: https://patch.msgid.link/20251029-work-namespace-nstree-listns-v4-36-2e6f823ebdc0@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Test that parent stays active as long as ANY child is active.
Create parent user namespace with two child net namespaces.
Parent should remain active until BOTH children are inactive.
Link: https://patch.msgid.link/20251029-work-namespace-nstree-listns-v4-35-2e6f823ebdc0@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Test hierarchical propagation with deep namespace hierarchy.
Create: init_user_ns -> user_A -> user_B -> net_ns
When net_ns is active, both user_A and user_B should be active.
This verifies the conditional recursion in __ns_ref_active_put() works.
Link: https://patch.msgid.link/20251029-work-namespace-nstree-listns-v4-34-2e6f823ebdc0@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Test that different namespace types with same owner all contribute
active references to the owning user namespace.
Link: https://patch.msgid.link/20251029-work-namespace-nstree-listns-v4-33-2e6f823ebdc0@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Test multiple children sharing same parent.
Parent should stay active as long as ANY child is active.
Link: https://patch.msgid.link/20251029-work-namespace-nstree-listns-v4-32-2e6f823ebdc0@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Test multi-level hierarchy (3+ levels deep).
Grandparent → Parent → Child
When child is active, both parent AND grandparent should be active.
Link: https://patch.msgid.link/20251029-work-namespace-nstree-listns-v4-31-2e6f823ebdc0@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Test that bind mounts keep namespaces in the tree even when inactive
Link: https://patch.msgid.link/20251029-work-namespace-nstree-listns-v4-30-2e6f823ebdc0@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Test hierarchical active reference propagation.
When a child namespace is active, its owning user namespace should also
be active automatically due to hierarchical active reference propagation.
This ensures parents are always reachable when children are active.
Link: https://patch.msgid.link/20251029-work-namespace-nstree-listns-v4-29-2e6f823ebdc0@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Test that an open file descriptor keeps a namespace active.
Even after the creating process exits, the namespace should remain
active as long as an fd is held open.
Link: https://patch.msgid.link/20251029-work-namespace-nstree-listns-v4-28-2e6f823ebdc0@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Test PID namespace active ref tracking
Link: https://patch.msgid.link/20251029-work-namespace-nstree-listns-v4-27-2e6f823ebdc0@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Test user namespace active ref tracking via credential lifecycle.
Link: https://patch.msgid.link/20251029-work-namespace-nstree-listns-v4-26-2e6f823ebdc0@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Test that a namespace remains active while a process is using it,
even after the creating process exits.
Link: https://patch.msgid.link/20251029-work-namespace-nstree-listns-v4-25-2e6f823ebdc0@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Test namespace lifecycle: create a namespace in a child process, get a
file handle while it's active, then try to reopen after the process
exits (namespace becomes inactive).
Link: https://patch.msgid.link/20251029-work-namespace-nstree-listns-v4-24-2e6f823ebdc0@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Test that initial namespaces can be reopened via file handle. Initial
namespaces should always have a ref count of one from boot.
Link: https://patch.msgid.link/20251029-work-namespace-nstree-listns-v4-23-2e6f823ebdc0@kernel.org
Tested-by: syzbot@syzkaller.appspotmail.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This is effectively unused and doesn't really server any purpose after
having reviewed all of the tests that rely on it.
Link: https://patch.msgid.link/20251029-work-namespace-nstree-listns-v4-22-2e6f823ebdc0@kernel.org
Tested-by: syzbot@syzkaller.appspotmail.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a loadable test module that validates CXL address translation
calculations using parameterized test vectors. The module tests both
host-to-device and device-to-host address translations for Modulo and
XOR interleave arithmetic.
Two types of testing are provided:
1. Parameterized test vectors:
Test vectors are passed as module parameters in the format:
"dpa pos r_eiw r_eig hb_ways math expected_spa".
Round-trip validation is performed:
- Translate a DPA and position to a SPA
- Verify the result matches expected SPA
- Translate that SPA back to a DPA and position
- Verify round-trip consistency
2. Internal validation testing:
When no test vectors are provided, the module performs validation
of the translation functions by checking parameter boundaries and
running 10,000 iterations of randomly generated valid parameters
to exercise the core calculation functions.
The module uses the CXL Driver translation functions through symbols
exported exclusively for cxl_translate.
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
devm_cxl_port_enumerate_dports() is not longer used after below commit
commit 4f06d81e7c6a ("cxl: Defer dport allocation for switch ports")
Delete it and the relevant interface implemented in cxl_test.
Signed-off-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Refactor ublk_thread to be a thread-local variable instead of storing
it in ublk_dev:
- Remove pthread_t thread field from struct ublk_thread and move it to
struct ublk_thread_info
- Remove struct ublk_thread array from struct ublk_dev, reducing memory
footprint
- Define struct ublk_thread as local variable in __ublk_io_handler_fn()
instead of accessing it from dev->threads[]
- Extract main IO handling logic into __ublk_io_handler_fn() which is
marked as noinline
- Move CPU affinity setup to ublk_io_handler_fn() before calling
__ublk_io_handler_fn()
- Update ublk_thread_set_sched_affinity() to take struct ublk_thread_info *
instead of struct ublk_thread *, and use pthread_setaffinity_np()
instead of sched_setaffinity()
- Reorder struct ublk_thread fields to group related state together
This change makes each thread's ublk_thread structure truly local to
the thread, improving cache locality and reducing memory usage.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move ublk_thread_set_sched_affinity() call before ublk_thread_init()
to ensure memory allocations during thread initialization occur on
the correct NUMA node. This leverages Linux's first-touch memory
policy for better NUMA locality.
Also convert ublk_thread_set_sched_affinity() to use
pthread_setaffinity_np() instead of sched_setaffinity(), as the
pthread API is the proper interface for setting thread affinity in
multithreaded programs.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Surprisingly we forgot to add this common one. It was added with a
per-arch guard allowing to later implement it in arch-specific asm
code like was done for a few other ones.
The test verifies that we don't search past the indicated length.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
ethtool-common.sh
The script "ethtool-common.sh" is not installed in INSTALL_PATH, and
triggers some errors when I try to run the test
'drivers/net/netdevsim/ethtool-coalesce.sh':
TAP version 13
1..1
# timeout set to 600
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# ./ethtool-coalesce.sh: line 4: ethtool-common.sh: No such file or directory
# ./ethtool-coalesce.sh: line 25: make_netdev: command not found
# ethtool: bad command line argument(s)
# ./ethtool-coalesce.sh: line 124: check: command not found
# ./ethtool-coalesce.sh: line 126: [: -eq: unary operator expected
# FAILED /0 checks
not ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh # exit=1
Install this file to avoid this error. After this patch:
TAP version 13
1..1
# timeout set to 600
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# PASSED all 22 checks
ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh
Fixes: fbb8531e58bd ("selftests: extract common functions in ethtool-common.sh")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Link: https://patch.msgid.link/20251030040340.3258110-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The GRO self-test, gro.c, currently constructs IPv6 packets containing a
Hop-by-Hop Options header (IPPROTO_HOPOPTS) to ensure the GRO path
correctly handles IPv6 extension headers.
However, network elements may be configured to drop packets with the
Hop-by-Hop Options header (HBH). This causes the self-test to fail
in environments where such network elements are present.
To improve the robustness and reliability of this test in diverse
network environments, switch from using IPPROTO_HOPOPTS to
IPPROTO_DSTOPTS (Destination Options).
The Destination Options header is less likely to be dropped by
intermediate routers and still serves the core purpose of the test:
validating GRO's handling of an IPv6 extension header. This change
ensures the test can execute successfully without being incorrectly
failed by network policies outside the kernel's control.
Fixes: 7d1575014a63 ("selftests/net: GRO coalesce test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Anubhav Singh <anubhavsinggh@google.com>
Link: https://patch.msgid.link/20251030060436.1556664-1-anubhavsinggh@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Due to the gro_sender sending data packets and FIN packets
in very quick succession, these are received almost simultaneously
by the gro_receiver. FIN packets are sometimes processed before the
data packets leading to intermittent (~1/100) test failures.
This change adds a delay of 100ms before sending FIN packets
in gro:tcp test to avoid the out-of-order delivery. The same
mitigation already exists for the gro:ip test.
Fixes: 7d1575014a63 ("selftests/net: GRO coalesce test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Anubhav Singh <anubhavsinggh@google.com>
Link: https://patch.msgid.link/20251030062818.1562228-1-anubhavsinggh@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
test_tc_tunnel is missing checks on any open_netns. Add those checks
anytime we try to enter a net namespace, and skip the related operations
if we fail. While at it, reduce the number of open_netns/close_netns for
cases involving operations in two distinct namespaces: the test
currently does the following:
nstoken = open_netns("foo")
do_operation();
close(nstoken);
nstoken = open_netns("bar")
do_another_operation();
close(nstoken);
As already stated in reviews for the initial test, we don't need to go
back to the root net namespace to enter a second namespace, so just do:
ntoken_client = open_netns("foo")
do_operation();
nstoken_server = open_netns("bar")
do_another_operation();
close(nstoken_server);
close(nstoken_client);
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251031-tc_tunnel_improv-v1-2-0ffe44d27eda@bootlin.com
|
|
A subtest setup can fail in a wide variety of ways, so make sure not to
run it if an issue occurs during its setup. The return value is
already representing whether the setup succeeds or fails, it is just
about wiring it.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251031-tc_tunnel_improv-v1-1-0ffe44d27eda@bootlin.com
|
|
Pull VFIO fixes from Alex Williamson:
- Fix overflows in vfio type1 backend for mappings at the end of the
64-bit address space, resulting in leaked pinned memory.
New selftest support included to avoid such issues in the future
(Alex Mastro)
* tag 'vfio-v6.18-rc4' of https://github.com/awilliam/linux-vfio:
vfio: selftests: add end of address space DMA map/unmap tests
vfio: selftests: update DMA map/unmap helpers to support more test kinds
vfio/type1: handle DMA map/unmap up to the addressable limit
vfio/type1: move iova increment to unmap_unpin_*() caller
vfio/type1: sanitize for overflow using check_*_overflow()
|
|
test_xsk.c isn't part of the test_progs framework.
Integrate the tests defined by test_xsk.c into the test_progs framework
through a new file : prog_tests/xsk.c. ZeroCopy mode isn't tested in it
as veth peers don't support it.
Move test_xsk{.c/.h} to prog_tests/.
Add the find_bit library to test_progs sources in the Makefile as it is
is used by test_xsk.c
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20251031-xsk-v7-15-39fe486593a3@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Following tests won't fit in the CI:
- XDP_ADJUST_TAIL_* and SEND_RECEIVE_9K_PACKETS because of their
flakyness
- UNALIGNED_* because they depend on huge page allocations
- *_RING_SIZE because they depend on HW rings
- TEARDOWN because it's too long
Remove these tests from the nominal tests table so they won't be
run by the CI in upcoming patch.
Create a skip_ci_tests table to hold them.
Use this skip_ci table in xskxceiver.c to keep all the tests available
from the test_xsk.sh script.
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20251031-xsk-v7-14-39fe486593a3@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
If any allocation in the pkt_stream_*() helpers fail, exit_with_error() is
called. This terminates the program immediately. It prevents the following
tests from running and isn't compliant with the CI.
Return NULL in case of allocation failure.
Return TEST_FAILURE when something goes wrong in the packet generation.
Clean up the resources if a failure happens between two steps of a test.
Move exit_with_error()'s definition into xskxceiver.c as it isn't used
anywhere else now.
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20251031-xsk-v7-13-39fe486593a3@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
__testapp_validate_traffic() calls exit_with_error() on failures. This
exits the program immediately. It prevents the following tests from
running and isn't compliant with the CI.
Return TEST_FAILURE instead of calling exit_with_error().
Release the resource of the 1st thread if a failure happens between its
creation and the creation of the second thread.
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20251031-xsk-v7-12-39fe486593a3@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
TX and RX workers can fail in many places. These failures trigger a call
to exit_with_error() which exits the program immediately. It prevents the
following tests from running and isn't compliant with the CI.
Add return value to functions that can fail.
Handle failures more smoothly through report_failure().
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20251031-xsk-v7-11-39fe486593a3@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
exit_with_error() is called when gettimeofday() fails. This exits the
program immediately. It prevents the following tests from being run and
isn't compliant with the CI.
Return TEST_FAILURE instead of calling exit_on_error().
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20251031-xsk-v7-10-39fe486593a3@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
xsk_reattach_xdp calls exit_with_error() on failures. This exits the
program immediately. It prevents the following tests from being run and
isn't compliant with the CI.
Add a return value to the functions handling XDP attachments to handle
errors more smoothly.
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20251031-xsk-v7-9-39fe486593a3@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
init_iface() doesn't have any return value while it can fail. In case of
failure it calls exit_on_error() which exits the application
immediately. This prevents the following tests from being run and isn't
compliant with the CI
Add a return value to init_iface() so errors can be handled more
smoothly.
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20251031-xsk-v7-8-39fe486593a3@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
testapp_validate_traffic() doesn't release the sockets and the umem
created by the threads if the test isn't currently in its last step.
Thus, if the swap_xsk_resources() fails before the last step, the
created resources aren't cleaned up.
Clean the sockets and the umem in case of swap_xsk_resources() failure.
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20251031-xsk-v7-7-39fe486593a3@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The clean-up done at the end of a test in __testapp_validate_traffic()
isn't wrapped in a function. It isn't convenient if we want to use it
somewhere else in the code.
Wrap the clean-up in two new functions : the first deletes the sockets,
the second releases the umem.
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20251031-xsk-v7-6-39fe486593a3@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
testapp_xdp_shared_umem() generates pkt_stream on each xsk from xsk_arr,
where normally xsk_arr[0] gets pkt_streams and xsk_arr[1] have them NULLed.
At the end of the test pkt_stream_restore_default() only releases
xsk_arr[0] which leads to memory leaks.
Release the missing pkt_stream at the end of testapp_xdp_shared_umem()
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20251031-xsk-v7-5-39fe486593a3@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
testapp_stats_rx_dropped() generates pkt_stream twice. The last
generated is released by pkt_stream_restore_default() at the end of the
test but we lose the pointer of the first pkt_stream.
Release the 'middle' pkt_stream when it's getting replaced to prevent
memory leaks.
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20251031-xsk-v7-4-39fe486593a3@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
__testapp_validate_traffic is supposed to return an integer value that
tells if the test passed (0), failed (-1) or was skiped (2). It actually
returns a boolean in the end. This doesn't harm when the test is
successful but can lead to misinterpretation in case of failure as 1
will be returned instead of -1.
Return TEST_FAILURE (-1) in case of failure, TEST_PASS (0) otherwise.
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20251031-xsk-v7-3-39fe486593a3@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
bitmap is used before being initialized.
Initialize it to zero before using it.
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20251031-xsk-v7-2-39fe486593a3@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
AF_XDP features are tested by the test_xsk.sh script but not by the
test_progs framework. The tests used by the script are defined in
xksxceiver.c which can't be integrated in the test_progs framework as is.
Extract these test definitions from xskxceiver{.c/.h} to put them in new
test_xsk{.c/.h} files.
Keep the main() function and its unshared dependencies in xksxceiver to
avoid impacting the test_xsk.sh script which is often used to test real
hardware.
Move ksft_test_result_*() calls to xskxceiver.c to keep the kselftest's
report valid
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20251031-xsk-v7-1-39fe486593a3@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.18-rc4).
No conflicts, adjacent changes:
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
ded9813d17d3 ("net: stmmac: Consider Tx VLAN offload tag length for maxSDU")
26ab9830beab ("net: stmmac: replace has_xxxx with core_type")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fix build warning in cachestat found during clang build and add
tmpshmcstat to .gitignore"
* tag 'linux_kselftest-fixes-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: cachestat: Fix warning on declaration under label
selftests/cachestat: add tmpshmcstat file to .gitignore
|
|
We are trying to move away from netdevsim-only tests and towards
tests which can be run both against netdevsim and real drivers.
Replace the simple bash script we have for checking ethtool -g/-G
on netdevsim with a Python test tweaking those params as well
as channel count.
The new test is not exactly equivalent to the netdevsim one,
but real drivers don't often support random ring sizes,
let alone modifying max values via debugfs.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251029164930.2923448-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
get-reg-list includes ZCR_EL2 in the list of EL2 registers that it looks
for when NV is enabled but does not have any feature gate for this register,
meaning that testing any combination of features that includes EL2 but does
not include SVE will result in a test failure due to a missing register
being reported:
| The following lines are missing registers:
|
| ARM64_SYS_REG(3, 4, 1, 2, 0),
Add ZCR_EL2 to feat_id_regs so that the test knows not to expect to see it
without SVE being enabled.
Fixes: 3a90b6f27964 ("KVM: arm64: selftests: get-reg-list: Add base EL2 registers")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20251024-kvm-arm64-get-reg-list-zcr-el2-v1-1-0cd0ff75e22f@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
We recently added support for SCTLR2_EL2 to the kernel but did not add it
to get-reg-list, resulting in it reporting the missing register when it
is available. Add it.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20251023-b4-kvm-arm64-get-reg-list-sctlr-el2-v1-1-088f88ff992a@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Since GITS_TYPER.PTA == 0, the ITS MAPC command demands a CPU ID,
rather than a physical redistributor address, for its RDbase
command argument.
As such, when MAPC-ing guest ITS collections, vgic_lpi_stress iterates
over CPU IDs in the range [0, nr_cpus), passing them as the RDbase
vcpu_id argument to its_send_mapc_cmd().
However, its_encode_target() in the its_send_mapc_cmd() selftest
handler expects RDbase arguments to be formatted with a 16 bit
offset, as shown by the 16-bit target_addr right shift its implementation:
its_mask_encode(&cmd->raw_cmd[2], target_addr >> 16, 51, 16)
At the moment, all CPU IDs passed into its_send_mapc_cmd() have no
offset, therefore becoming 0x0 after the bit shift. Thus, when
vgic_its_cmd_handle_mapc() receives the ITS command in vgic-its.c,
it always interprets the RDbase target CPU as CPU 0. All interrupts
sent to collections will be processed by vCPU 0, which defeats the
purpose of this multi-vCPU test.
Fix by creating procnum_to_rdbase() helper function, which left-shifts
the vCPU parameter received by its_send_mapc_cmd 16 bits before passing
it to its_encode_target for encoding.
Signed-off-by: Maximilian Dittgen <mdittgen@amazon.de>
Link: https://patch.msgid.link/20251020145946.48288-1-mdittgen@amazon.de
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Test that ICMP extensions are reported correctly when enabled and not
reported when disabled. Test both IPv4 and IPv6 and using different
packet sizes, to make sure trimming / padding works correctly.
Disable ICMP rate limiting (defaults to 1 per-second per-target) so that
the kernel will always generate ICMP errors when needed.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251027082232.232571-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce a new mode for the rqspinlock stress test that exercises a
deadlock that won't be detected by the AA and ABBA checks, such that we
always reliably trigger the timeout fallback. We need 4 CPUs for this
particular case, as CPU 0 is untouched, and three participant CPUs for
triggering the ABBCCA case.
Refactor the lock acquisition paths in the module to better reflect the
three modes and choose the right lock depending on the context.
Also drop ABBA case from running by default as part of test progs, since
the stress test can consume a significant amount of time.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20251029181828.231529-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
file_reader/on_open_expect_fault intermittently fails when test_progs
runs tests in parallel, because it expects a page fault on first read.
Another file_reader test running concurrently may have already pulled
the same pages into the page cache, eliminating the fault and causing a
spurious failure.
Make file_reader/on_open_expect_fault read from a file region that does
not overlap with other file_reader tests, so the initial access still
faults even under parallel execution.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20251029195907.858217-1-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
