| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently, the define_read!() and define_write!() I/O macros are crate
public. The only user outside of the I/O module is PCI (for the
configurations space I/O backend). Consequently, when CONFIG_PCI=n this
causes a compile time warning [1].
In order to fix this, rename the macros to io_define_read!() and
io_define_write!() and use #[macro_export] to export them.
This is better than making the crate public visibility conditional, as
eventually subsystems will have their own crate.
Also, I/O backends are valid to be implemented by drivers as well. For
instance, there are devices (such as GPUs) that run firmware which
allows to program other devices only accessible through the primary
device through indirect I/O.
Since the macros are now public, also add the corresponding
documentation.
Fixes: 121d87b28e1d ("rust: io: separate generic I/O helpers from MMIO implementation")
Reported-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Closes: https://lore.kernel.org/driver-core/CANiq72khOYkt6t5zwMvSiyZvWWHMZuNCMERXu=7K=_5tT-8Pgg@mail.gmail.com/ [1]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://patch.msgid.link/20260216131534.65008-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Pass '-Zunstable-options' flag required by the future Rust 1.95.0
- Fix 'objtool' warning for Rust 1.84.0
'kernel' crate:
- 'irq' module: add missing bound detected by the future Rust 1.95.0
- 'list' module: add missing 'unsafe' blocks and placeholder safety
comments to macros (an issue for future callers within the crate)
'pin-init' crate:
- Clean Clippy warning that changed behavior in the future Rust
1.95.0"
* tag 'rust-fixes-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: list: Add unsafe blocks for container_of and safety comments
rust: pin-init: replace clippy `expect` with `allow`
rust: irq: add `'static` bounds to irq callbacks
objtool/rust: add one more `noreturn` Rust function
rust: kbuild: pass `-Zunstable-options` for Rust 1.95.0
|
|
impl_list_item_mod.rs calls container_of! without unsafe blocks at a
couple of places. Since container_of! is unsafe, the blocks are strictly
necessary.
The problem was so far not visible because the "unsafe-op-in-unsafe-fn"
check is a lint rather than a hard compiler error, and Rust suppresses
lints triggered inside of a macro from another crate.
Thus, the error becomes only visible once someone from within the kernel
crate tries to use linked lists:
error[E0133]: call to unsafe function `core::ptr::mut_ptr::<impl *mut T>::byte_sub`
is unsafe and requires unsafe block
--> rust/kernel/lib.rs:252:29
|
252 | let container_ptr = field_ptr.byte_sub(offset).cast::<$Container>();
| ^^^^^^^^^^^^^^^^^^^^^^^^^^ call to unsafe function
|
::: rust/kernel/drm/jq.rs:98:1
|
98 | / impl_list_item! {
99 | | impl ListItem<0> for BasicItem { using ListLinks { self.links }; }
100 | | }
| |_- in this macro invocation
|
note: an unsafe function restricts its caller, but its body is safe by default
--> rust/kernel/list/impl_list_item_mod.rs:216:13
|
216 | unsafe fn view_value(me: *mut $crate::list::ListLinks<$num>) -> *const Self {
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
::: rust/kernel/drm/jq.rs:98:1
|
98 | / impl_list_item! {
99 | | impl ListItem<0> for BasicItem { using ListLinks { self.links }; }
100 | | }
| |_- in this macro invocation
= note: requested on the command line with `-D unsafe-op-in-unsafe-fn`
= note: this error originates in the macro `$crate::container_of` which comes
from the expansion of the macro `impl_list_item`
Therefore, add unsafe blocks to container_of! calls to fix the issue.
[ As discussed, let's fix the build for those that want to use the
macro within the `kernel` crate now and we can discuss the proper
safety comments afterwards. Thus I removed the ones from the patch.
However, we cannot just avoid the comments with `CLIPPY=1`, so I
provided placeholders for now, like we did in the past. They were
also needed for an `unsafe impl`.
While I am not happy about it, it isn't worse than the current
status (the comments were meant to be there), and at least this
shows what is missing -- our pre-existing "good first issue" [1]
may motivate new contributors to complete them properly.
Finally, I moved one of the existing safety comments one line down
so that Clippy could locate it.
Link: https://github.com/Rust-for-Linux/linux/issues/351 [1]
- Miguel ]
Cc: stable@vger.kernel.org
Fixes: c77f85b347dd ("rust: list: remove OFFSET constants")
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260216131613.45344-3-phasta@kernel.org
[ Fixed formatting. Reworded to fix the lint suppression
explanation. Indent build error. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
These callback functions take a generic `T` that is used in the body as
the generic argument in `Registration` and `ThreadedRegistration`. Those
types require `T: 'static`, but due to a compiler bug this requirement
isn't propagated to the function. Thus add the bound. This was caught in
the upstream Rust CI [1].
[ The three errors looked similar and will start appearing with Rust
1.95.0 (expected 2026-04-16). The first one was:
error[E0310]: the parameter type `T` may not live long enough
Error: --> rust/kernel/irq/request.rs:266:43
|
266 | let registration = unsafe { &*(ptr as *const Registration<T>) };
| ^^^^^^^^^^^^^^^^^^^^^^
| |
| the parameter type `T` must be valid for the static lifetime...
| ...so that the type `T` will meet its required lifetime bounds
|
help: consider adding an explicit lifetime bound
|
264 | unsafe extern "C" fn handle_irq_callback<T: Handler + 'static>(_irq: i32, ptr: *mut c_void) -> c_uint {
| +++++++++
- Miguel ]
Link: https://github.com/rust-lang/rust/pull/149389 [1]
Signed-off-by: Benno Lossin <lossin@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 29e16fcd67ee ("rust: irq: add &Device<Bound> argument to irq callbacks")
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/rust-for-linux/20260217222425.8755-1-cole@unwrap.rs/
Link: https://patch.msgid.link/20260214092740.3201946-1-lossin@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt driver updates for
7.0-rc1. Overall more lines were removed than added, thanks to
dropping the obsolete isp1362 USB host controller driver, always a
nice change.
Other than that, nothing major happening here, highlights are:
- lots of dwc3 driver updates and new hardware support added
- usb gadget function driver updates
- usb phy driver updates
- typec driver updates and additions
- USB rust binding updates for syntax and formatting changes
- more usb serial device ids added
- other smaller USB core and driver updates and additions
All of these have been in linux-next for a long time, with no reported
problems"
* tag 'usb-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (77 commits)
usb: typec: ucsi: Add Thunderbolt alternate mode support
usb: typec: hd3ss3220: Check if regulator needs to be switched
usb: phy: tegra: parametrize PORTSC1 register offset
usb: phy: tegra: parametrize HSIC PTS value
usb: phy: tegra: return error value from utmi_wait_register
usb: phy: tegra: cosmetic fixes
dt-bindings: usb: renesas,usbhs: Add RZ/G3E SoC support
usb: dwc2: fix resume failure if dr_mode is host
usb: cdns3: fix role switching during resume
usb: dwc3: gadget: Move vbus draw to workqueue context
USB: serial: option: add Telit FN920C04 RNDIS compositions
usb: dwc3: Log dwc3 address in traces
usb: gadget: tegra-xudc: Add handling for BLCG_COREPLL_PWRDN
usb: phy: tegra: add HSIC support
usb: phy: tegra: use phy type directly
usb: typec: ucsi: Enforce mode selection for cros_ec_ucsi
usb: typec: ucsi: Support mode selection to activate altmodes
usb: typec: Introduce mode_selection bit
usb: typec: Implement mode selection
usb: typec: Expose alternate mode priority via sysfs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio and other smaller driver
subsystem changes for 7.0-rc1. Lots of little things in here,
including:
- Loads of iio driver changes and updates and additions
- gpib driver updates
- interconnect driver updates
- i3c driver updates
- hwtracing (coresight and intel) driver updates
- deletion of the obsolete mwave driver
- binder driver updates (rust and c versions)
- mhi driver updates (causing a merge conflict, see below)
- mei driver updates
- fsi driver updates
- eeprom driver updates
- lots of other small char and misc driver updates and cleanups
All of these have been in linux-next for a while, with no reported
issues"
* tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (297 commits)
mux: mmio: fix regmap leak on probe failure
rust_binder: return p from rust_binder_transaction_target_node()
drivers: android: binder: Update ARef imports from sync::aref
rust_binder: fix needless borrow in context.rs
iio: magn: mmc5633: Fix Kconfig for combination of I3C as module and driver builtin
iio: sca3000: Fix a resource leak in sca3000_probe()
iio: proximity: rfd77402: Add interrupt handling support
iio: proximity: rfd77402: Document device private data structure
iio: proximity: rfd77402: Use devm-managed mutex initialization
iio: proximity: rfd77402: Use kernel helper for result polling
iio: proximity: rfd77402: Align polling timeout with datasheet
iio: cros_ec: Allow enabling/disabling calibration mode
iio: frequency: ad9523: correct kernel-doc bad line warning
iio: buffer: buffer_impl.h: fix kernel-doc warnings
iio: gyro: itg3200: Fix unchecked return value in read_raw
MAINTAINERS: add entry for ADE9000 driver
iio: accel: sca3000: remove unused last_timestamp field
iio: accel: adxl372: remove unused int2_bitmask field
iio: adc: ad7766: Use iio_trigger_generic_data_rdy_poll()
iio: magnetometer: Remove IRQF_ONESHOT
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull more misc vfs updates from Christian Brauner:
"Features:
- Optimize close_range() from O(range size) to O(active FDs) by using
find_next_bit() on the open_fds bitmap instead of linearly scanning
the entire requested range. This is a significant improvement for
large-range close operations on sparse file descriptor tables.
- Add FS_XFLAG_VERITY file attribute for fs-verity files, retrievable
via FS_IOC_FSGETXATTR and file_getattr(). The flag is read-only.
Add tracepoints for fs-verity enable and verify operations,
replacing the previously removed debug printk's.
- Prevent nfsd from exporting special kernel filesystems like pidfs
and nsfs. These filesystems have custom ->open() and ->permission()
export methods that are designed for open_by_handle_at(2) only and
are incompatible with nfsd. Update the exportfs documentation
accordingly.
Fixes:
- Fix KMSAN uninit-value in ovl_fill_real() where strcmp() was used
on a non-null-terminated decrypted directory entry name from
fscrypt. This triggered on encrypted lower layers when the
decrypted name buffer contained uninitialized tail data.
The fix also adds VFS-level name_is_dot(), name_is_dotdot(), and
name_is_dot_dotdot() helpers, replacing various open-coded "." and
".." checks across the tree.
- Fix read-only fsflags not being reset together with xflags in
vfs_fileattr_set(). Currently harmless since no read-only xflags
overlap with flags, but this would cause inconsistencies for any
future shared read-only flag
- Return -EREMOTE instead of -ESRCH from PIDFD_GET_INFO when the
target process is in a different pid namespace. This lets userspace
distinguish "process exited" from "process in another namespace",
matching glibc's pidfd_getpid() behavior
Cleanups:
- Use C-string literals in the Rust seq_file bindings, replacing the
kernel::c_str!() macro (available since Rust 1.77)
- Fix typo in d_walk_ret enum comment, add porting notes for the
readlink_copy() calling convention change"
* tag 'vfs-7.0-rc1.misc.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: add porting notes about readlink_copy()
pidfs: return -EREMOTE when PIDFD_GET_INFO is called on another ns
nfsd: do not allow exporting of special kernel filesystems
exportfs: clarify the documentation of open()/permission() expotrfs ops
fsverity: add tracepoints
fs: add FS_XFLAG_VERITY for fs-verity files
rust: seq_file: replace `kernel::c_str!` with C-Strings
fs: dcache: fix typo in enum d_walk_ret comment
ovl: use name_is_dot* helpers in readdir code
fs: add helpers name_is_dot{,dot,_dotdot}
ovl: Fix uninit-value in ovl_fill_real
fs: reset read-only fsflags together with xflags
fs/file: optimize close_range() complexity from O(N) to O(Sparse)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/a.hindborg/linux
Pull configfs updates from Andreas Hindborg:
- Switch the configfs rust bindings to use c string literals provided
by the compiler, rather than a macro
- A follow up on constifying `configfs_item_operations`, applying the
change to the configfs sample
* tag 'configfs-for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/a.hindborg/linux:
samples: configfs: Constify struct configfs_item_operations and configfs_group_operations
rust: configfs: replace `kernel::c_str!` with C-Strings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls
for small helper and stack canary overhead in the fast-path.
This generates better and faster code with very small or no text
size increases, as in many cases the call generated more code than
the actual inlined helper.
- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.
- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage
by up to ~30%.
- Do not add HBH header to Big TCP GSO packets. This simplifies the
RX path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without
the HBH hint.
- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified,
aligning IPv6 to IPv4 behavior.
- Multi-queue aware sch_cake. This makes it possible to scale the
rate shaper of sch_cake across multiple CPUs, while still enforcing
a single global rate on the interface.
- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations
that are safer in crash scenarios.
- Improve the TCP ipv6 output path to cache the flow information,
saving cpu cycles, reducing cache line misses and stack use.
- Improve netfilter packet tracker to resolve clashes for most
protocols, avoiding unneeded drops on rare occasions.
- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.
- Reduce tcp socket size by one cache line.
- Notify neighbour changes atomically, avoiding inconsistencies
between the notification sequence and the actual states sequence.
- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.
- Improve xsk generic performances with cache-alignment-oriented
optimizations.
- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes
back online.
Driver API:
- Support for switching the working mode (automatic vs manual) of a
DPLL device via netlink.
- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.
- Introduce "rx-polarity" and "tx-polarity" device tree properties,
to generalize polarity inversion requirements for differential
signaling.
- Add helper to create, prepare and enable managed clocks.
Device drivers:
- Add Huawei hinic3 PF etherner driver.
- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet
controller.
- Add ethernet driver for MaxLinear MxL862xx switches
- Remove parallel-port Ethernet driver.
- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().
- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.
- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram
and NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the
used H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO,
leading to 12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new
layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors
- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC
- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework
- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema
- CAN:
- move skb headroom content into skb extensions, making CAN
metadata access more robust
- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling
- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211
- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support multi-wiphy
devices and and pave the way for future device support in the
same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support
- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections
- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature"
* tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits)
bnge/bng_re: Add a new HSI
net: macb: Fix tx/rx malfunction after phy link down and up
af_unix: Fix memleak of newsk in unix_stream_connect().
net: ti: icssg-prueth: Add optional dependency on HSR
net: dsa: add basic initial driver for MxL862xx switches
net: mdio: add unlocked mdiodev C45 bus accessors
net: dsa: add tag format for MxL862xx switches
dt-bindings: net: dsa: add MaxLinear MxL862xx
selftests: drivers: net: hw: Modify toeplitz.c to poll for packets
octeontx2-pf: Unregister devlink on probe failure
net: renesas: rswitch: fix forwarding offload statemachine
ionic: Rate limit unknown xcvr type messages
tcp: inet6_csk_xmit() optimization
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock()
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect()
ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6
ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update()
ipv6: use np->final in inet6_sk_rebuild_header()
ipv6: add daddr/final storage in struct ipv6_pinfo
net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"Bus:
- Ensure bus->match() is consistently called with the device lock
held
- Improve type safety of bus_find_device_by_acpi_dev()
Devtmpfs:
- Parse 'devtmpfs.mount=' boot parameter with kstrtoint() instead of
simple_strtoul()
- Avoid sparse warning by making devtmpfs_context_ops static
IOMMU:
- Do not register the qcom_smmu_tbu_driver in arm_smmu_device_probe()
MAINTAINERS:
- Add the new driver-core mailing list (driver-core@lists.linux.dev)
to all relevant entries
- Add missing tree location for "FIRMWARE LOADER (request_firmware)"
- Add driver-model documentation to the "DRIVER CORE" entry
- Add missing driver-core maintainers to the "AUXILIARY BUS" entry
Misc:
- Change return type of attribute_container_register() to void; it
has always been infallible
- Do not export sysfs_change_owner(), sysfs_file_change_owner() and
device_change_owner()
- Move devres_for_each_res() from the public devres header to
drivers/base/base.h
- Do not use a static struct device for the faux bus; allocate it
dynamically
Revocable:
- Patches for the revocable synchronization primitive have been
scheduled for v7.0-rc1, but have been reverted as they need some
more refinement
Rust:
- Device:
- Support dev_printk on all device types, not just the core Device
struct; remove now-redundant .as_ref() calls in dev_* print
calls
- Devres:
- Introduce an internal reference count in Devres<T> to avoid a
deadlock condition in case of (indirect) nesting
- DMA:
- Allow drivers to tune the maximum DMA segment size via
dma_set_max_seg_size()
- I/O:
- Introduce the concept of generic I/O backends to handle
different kinds of device shared memory through a common
interface.
This enables higher-level concepts such as register
abstractions, I/O slices, and field projections to be built
generically on top.
In a first step, introduce the Io, IoCapable<T>, and IoKnownSize
trait hierarchy for sharing a common interface supporting offset
validation and bound-checking logic between I/O backends.
- Refactor MMIO to use the common I/O backend infrastructure
- Misc:
- Add __rust_helper annotations to C helpers for inlining into
Rust code
- Use "kernel vertical" style for imports
- Replace kernel::c_str! with C string literals
- Update ARef imports to use sync::aref
- Use pin_init::zeroed() for struct auxiliary_device_id and
debugfs file_operations initialization
- Use LKMM atomic types in debugfs doc-tests
- Various minor comment and documentation fixes
- PCI:
- Implement PCI configuration space accessors using the common I/O
backend infrastructure
- Document pci::Bar device endianness assumptions
- SoC:
- Abstractions for struct soc_device and struct soc_device_attribute
- Sample driver for soc::Device"
* tag 'driver-core-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (79 commits)
rust: devres: fix race condition due to nesting
rust: dma: add missing __rust_helper annotations
samples: rust: pci: Remove some additional `.as_ref()` for `dev_*` print
Revert "revocable: Revocable resource management"
Revert "revocable: Add Kunit test cases"
Revert "selftests: revocable: Add kselftest cases"
driver core: remove device_change_owner() export
sysfs: remove exports of sysfs_*change_owner()
driver core: disable revocable code from build
revocable: Add KUnit test for concurrent access
revocable: fix SRCU index corruption by requiring caller-provided storage
revocable: Add KUnit test for provider lifetime races
revocable: Fix races in revocable_alloc() using RCU
driver core: fix inverted "locked" suffix of driver_match_device()
rust: io: move MIN_SIZE and io_addr_assert to IoKnownSize
rust: pci: re-export ConfigSpace
rust: dma: allow drivers to tune max segment size
gpu: tyr: remove redundant `.as_ref()` for `dev_*` print
rust: auxiliary: use `pin_init::zeroed()` for device ID
rust: debugfs: use pin_init::zeroed() for file_operations
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core changes:
- Rust bindings for IO-pgtable code
- IOMMU page allocation debugging support
- Disable ATS during PCI resets
Intel VT-d changes:
- Skip dev-iotlb flush for inaccessible PCIe device
- Flush cache for PASID table before using it
- Use right invalidation method for SVA and NESTED domains
- Ensure atomicity in context and PASID entry updates
AMD-Vi changes:
- Support for nested translations
- Other minor improvements
ARM-SMMU-v2 changes:
- Configure SoC-specific prefetcher settings for Qualcomm's "MDSS"
ARM-SMMU-v3 changes:
- Improve CMDQ locking fairness for pathetically small queue sizes
- Remove tracking of the IAS as this is only relevant for AArch32 and
was causing C_BAD_STE errors
- Add device-tree support for NVIDIA's CMDQV extension
- Allow some hitless transitions for the 'MEV' and 'EATS' STE fields
- Don't disable ATS for nested S1-bypass nested domains
- Additions to the kunit selftests"
* tag 'iommu-updates-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (54 commits)
iommupt: Always add IOVA range to iotlb_gather in gather_range_pages()
iommu/amd: serialize sequence allocation under concurrent TLB invalidations
iommu/amd: Fix type of type parameter to amd_iommufd_hw_info()
iommu/arm-smmu-v3: Do not set disable_ats unless vSTE is Translate
iommu/arm-smmu-v3-test: Add nested s1bypass/s1dssbypass coverage
iommu/arm-smmu-v3: Mark EATS_TRANS safe when computing the update sequence
iommu/arm-smmu-v3: Mark STE MEV safe when computing the update sequence
iommu/arm-smmu-v3: Add update_safe bits to fix STE update sequence
iommu/arm-smmu-v3: Add device-tree support for CMDQV driver
iommu/tegra241-cmdqv: Decouple driver from ACPI
iommu/arm-smmu-qcom: Restore ACTLR settings for MDSS on sa8775p
iommu/vt-d: Fix race condition during PASID entry replacement
iommu/vt-d: Clear Present bit before tearing down context entry
iommu/vt-d: Clear Present bit before tearing down PASID entry
iommu/vt-d: Flush piotlb for SVM and Nested domain
iommu/vt-d: Flush cache for PASID table before using it
iommu/vt-d: Flush dev-IOTLB only when PCIe device is accessible in scalable mode
iommu/vt-d: Skip dev-iotlb flush for inaccessible PCIe device without scalable mode
rust: iommu: fix `srctree` link warning
rust: iommu: fix Rust formatting
...
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- amdgpu support for lots of new IP blocks which means newer GPUs
- xe has a lot of SR-IOV and SVM improvements
- lots of intel display refactoring across i915/xe
- msm has more support for gen8 platforms
- Given up on kgdb/kms integration, it's too hard on modern hw
core:
- drop kgdb support
- replace system workqueue with percpu
- account for property blobs in memcg
- MAINTAINERS updates for xe + buddy
rust:
- Fix documentation for Registration constructors
- Use pin_init::zeroed() for fops initialization
- Annotate DRM helpers with __rust_helper
- Improve safety documentation for gem::Object::new()
- Update AlwaysRefCounted imports
- mm: Prevent integer overflow in page_align()
atomic:
- add drm_device pointer to drm_private_obj
- introduce gamma/degamma LUT size check
buddy:
- fix free_trees memory leak
- prevent BUG_ON
bridge:
- introduce drm_bridge_unplug/enter/exit
- add connector argument to .hpd_notify
- lots of recounting conversions
- convert rockchip inno hdmi to bridge
- lontium-lt9611uxc: switch to HDMI audio helpers
- dw-hdmi-qp: add support for HPD-less setups
- Algoltek AG6311 support
panels:
- edp: CSW MNE007QB3-1, AUO B140HAN06.4, AUO B140QAX01.H
- st75751: add SPI support
- Sitronix ST7920, Samsung LTL106HL02
- LG LH546WF1-ED01, HannStar HSD156J
- BOE NV130WUM-T08
- Innolux G150XGE-L05
- Anbernic RG-DS
dma-buf:
- improve sg_table debugging
- add tracepoints
- call clear_page instead of memset
- start to introduce cgroup memory accounting in heaps
- remove sysfs stats
dma-fence:
- add new helpers
dp:
- mst: avoid oob access with vcpi=0
hdmi:
- limit infoframes exposure to userspace
gem:
- reduce page table overhead with THP
- fix leak in drm_gem_get_unmapped_area
gpuvm:
- API sanitation for rust bindings
sched:
- introduce new helpers
panic:
- report invalid panic modes
- add kunit tests
i915/xe display:
- Expose sharpness only if num_scalers is >= 2
- Add initial Xe3P_LPD for NVL
- BMG FBC support
- Add MTL+ platforms to support dpll framework
_ fix DIMM_S DRM decoding on ICL
- Return to using AUX interrupts
- PSR/Panel replay refactoring
- use consolidation HDMI tables
- Xe3_LPD CD2X dividier changes
xe:
- vfio: add vfio_pci for intel GPU
- multi queue support
- dynamic pagemaps and multi-device SVM
- expose temp attribs in hwmon
- NO_COMPRESSION bo flag
- expose MERT OA unit
- sysfs survivability refactor
- SRIOV PF: add MERT support
- enable SR-IOV VF migration
- Enable I2C/NVM on Crescent Island
- Xe3p page reclaimation support
- introduce SRIOV scheduler groups
- add SoC remappt support in system controller
- insert compiler barriers in GuC code
- define NVL GuC firmware
- handle GT resume failure
- fix drm scheduler layering violations
- enable GSC loading and PXP for PTL
- disable GuC Power DCC strategy on PTL
- unregister drm device on probe error
i915:
- move to kernel standard fault injection
- bump recommended GuC version for DG2 and MTL
amdgpu:
- SMUIO 15.x, PSP 15.x support
- IH 6.1.1/7.1 support
- MMHUB 3.4/4.2 support
- GC 11.5.4/12.1 support
- SDMA 6.1.4/7.1/7.11.4 support
- JPEG 5.3 support
- UserQ updates
- GC 9 gfx queue reset support
- TTM memory ops parallelization
- convert legacy logging to new helpers
- DC analog fixes
amdkfd:
- GC 11.5.4/12.1 suppport
- SDMA 6.1.4/7.1 support
- per context support
- increase kfd process hash table
- Reserved SDMA rework
radeon:
- convert legacy logging to new helpers
- use devm for i2c adapters
msm:
- GPU
- Document a612/RGMU dt bindings
- UBWC 6.0 support (for A840 / Kaanapali)
- a225 support
- DPU:
- Switch to use virtual planes by default
- Fix DSI CMD panels on DPU 3.x
- Rewrite format handling to remove intermediate representation
- Fix watchdog on DPU 8.x+
- Fix TE / Vsync source setting on DPU 8.x+
- Add 3D_Mux on SC7280
- Kaanapali platform support
- Fix UBWC register programming
- Make RM reserve DSPP-enabled mixers for CRTCs with LMs
- Gamma correction support
- DP:
- Enable support for eDP 1.4+ link rate tables
- Fix MDSS1 DP indices on SA8775P, making them to work
- Fix msm_dp_ctrl_config_msa() to work with LLVM 20
- DSI:
- Document QCS8300 as compatible with SA8775P
- Kaanapali platform support
- DSI PHY:
- switch to divider_determine_rate()
- MDP5:
- Drop support for MSM8998, SDM660 and SDM630 (switch over to DPU)
- MDSS:
- Kaanapali platform support
- Fixed UBWC register programming
nova-core:
- Prepare for Turing support. This includes parsing and handling
Turing-specific firmware headers and sections as well as a Turing
Falcon HAL implementation
- Get rid of the Result<impl PinInit<T, E>> anti-pattern
- Relocate initializer-specific code into the appropriate initializer
- Use CStr::from_bytes_until_nul() to remove custom helpers
- Improve handling of unexpected firmware values
- Clean up redundant debug prints
- Replace c_str!() with native Rust C-string literals
- Update nova-core task list
nova:
- Align GEM object size to system page size
tyr:
- Use generated uAPI bindings for GpuInfo
- Replace manual sleeps with read_poll_timeout()
- Replace c_str!() with native Rust C-string literals
- Suppress warnings for unread fields
- Fix incorrect register name in print statement
nouveau:
- fix big page table support races in PTE management
- improve reclocking on tegra 186+
amdxdna:
- fix suspend race conditions
- improve handling of zero tail pointers
- fix cu_idx overwritten during command setup
- enable hardware context priority
- remove NPU2 support
- update message buffer allocation requirements
- update firmware version check
ast:
- support imported cursor buffers
- big endian fixes
etnaviv:
- add PPU flop reset support
imagination:
- add AM62P support
- introduce hw version checks
ivpu:
- implement warm boot flow
panfrost:
- add bo sync ioctl
- add GPU_PM_RT support for RZ/G3E SoC
panthor:
- add bo sync ioctl
- enable timestamp propagation
- scheduler robustness improvements
- VM termination fixes
- huge page support
rockchip:
- RK3368 HDMI Support
- get rid of atomic_check fixups
- RK3506 support
- RK3576/RK3588 improved HPD handling
rz-du:
- RZ/V2H(P) MIPI-DSI Support
v3d:
- fix DMA segment size
- convert to new logging helpers
mediatek:
- move DP training to hotplug thread
- convert logging to new helpers
- add support for HS speed DSI
- Genio 510/700/1200-EVK, Radxa NIO-12L HDMI support
atmel-hlcdc:
- switch to drmm resource
- support nomodeset
- use newer helpers
hisilicon:
- fix various DP bugs
renesas:
- fix kernel panic on reboot
exynos:
- fix vidi_connection_ioctl using wrong device
- fix vidi_connection deref user ptr
- fix concurrency regression with vidi_context
vkms:
- add configfs support for display configuration
* tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel: (1610 commits)
drm/xe/pm: Disable D3Cold for BMG only on specific platforms
drm/xe: Fix kerneldoc for xe_tlb_inval_job_alloc_dep
drm/xe: Fix kerneldoc for xe_gt_tlb_inval_init_early
drm/xe: Fix kerneldoc for xe_migrate_exec_queue
drm/xe/query: Fix topology query pointer advance
drm/xe/guc: Fix kernel-doc warning in GuC scheduler ABI header
drm/xe/guc: Fix CFI violation in debugfs access.
accel/amdxdna: Move RPM resume into job run function
accel/amdxdna: Fix incorrect DPM level after suspend/resume
nouveau/vmm: start tracking if the LPT PTE is valid. (v6)
nouveau/vmm: increase size of vmm pte tracker struct to u32 (v2)
nouveau/vmm: rewrite pte tracker using a struct and bitfields.
accel/amdxdna: Fix incorrect error code returned for failed chain command
accel/amdxdna: Remove hardware context status
drm/bridge: imx8qxp-pixel-combiner: Fix bailout for imx8qxp_pc_bridge_probe()
drm/panel: ilitek-ili9882t: Remove duplicate initializers in tianma_il79900a_dsc
drm/i915/display: fix the pixel normalization handling for xe3p_lpd
drm/exynos: vidi: use ctx->lock to protect struct vidi_context member variables related to memory alloc/free
drm/exynos: vidi: fix to avoid directly dereferencing user pointer
drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"There are a few patches adapting to changes in Rust land which seems
to be the norm since there is a pwm driver written in Rust. Other than
that just a few cleanups and a single fix for the tiehrpwm driver that
came in too late for making it into v6.19.
Thanks to Andy Shevchenko, Bartosz Golaszewski, Daniel Almeida and
Michal Wilczynski for reviews in this cycle, and to Alice Ryhl, Ben
Zong-You Xie, Gokul Praveen, Kari Argillander, Markus Probst, Raag
Jadav, Shankari Anand, Tamir Duberstein and Vladimir Zapolskiy for
code contributions"
* tag 'pwm/for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: Remove redundant check in pwm_ops_check()
pwm: tiehrpwm: Enable pwmchip's parent device before setting configuration
pwm: Update MAINTAINER entry
rust: pwm: Add __rust_helper to helpers
rust: pwm: Simplify to_result call sites and unsafe blocks
rust: pwm: Fix potential memory leak on init error
dt-bindings: pwm: nxp,lpc32xx-pwm: Specify clocks property as mandatory
pwm: th1520: Replace `kernel::c_str!` with C-Strings
pwm: dwc: Use size macro
pwm: Emit native configuration in /sys/kernel/debug/pwm
rust: pwm: Add UnregisteredChip wrapper around Chip
rust: pwm: Update ARef and AlwaysRefCounted imports to use sync::aref
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"There's a bunch of new drivers here, plus a lot of hardening for the
supply resolution code which allow us to support systems where we have
two PMICs each of which has regulators supplied by the other. This did
work a long time ago but got broken as part of improved integration
with the device model, it's fairly rare so nobody noticed.
- Improvements for supply handling from André Draszik to allow
systems with two PMICs with supply/consumer relationships in both
directions to instantiate.
- New drivers for Maxim MAX776750, Realtek RT8902, Samsung S2MPG11,
Texas Instuments TPS65185.
This have also pulls in some MFD updates which are build dependencies
for the Samsung S2MPG11 support"
* tag 'regulator-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (42 commits)
regulator: s2mps11: more descriptive gpio consumer name
regulator: s2mps11: add S2MPG11 regulator
regulator: s2mps11: refactor S2MPG10 regulator macros for S2MPG11 reuse
regulator: s2mps11: refactor S2MPG10 ::set_voltage_time() for S2MPG11 reuse
regulator: s2mps11: add S2MPG10 regulator
regulator: s2mps11: refactor handling of external rail control
regulator: s2mps11: update node parsing (allow -supply properties)
regulator: s2mps11: place constants on right side of comparison tests
regulator: s2mps11: use dev_err_probe() where appropriate
regulator: s2mps11: drop two needless variable initialisations
regulator: add REGULATOR_LINEAR_VRANGE macro
regulator: dt-bindings: add s2mpg11-pmic regulators
regulator: dt-bindings: add s2mpg10-pmic regulators
dt-bindings: firmware: google,gs101-acpm-ipc: convert regulators to lowercase
mfd: sec: Add support for S2MPG11 PMIC via ACPM
mfd: sec: s2mpg10: Reorder regulators for better probe performance
dt-bindings: mfd: Add samsung,s2mpg11-pmic
dt-bindings: mfd: samsung,s2mpg10-pmic: Link to its regulators
dt-bindings: mfd: samsung,s2mps11: Split s2mpg10-pmic into separate file
mfd: sec: Drop now unused struct sec_pmic_dev::irq_data
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Lock debugging:
- Implement compiler-driven static analysis locking context checking,
using the upcoming Clang 22 compiler's context analysis features
(Marco Elver)
We removed Sparse context analysis support, because prior to
removal even a defconfig kernel produced 1,700+ context tracking
Sparse warnings, the overwhelming majority of which are false
positives. On an allmodconfig kernel the number of false positive
context tracking Sparse warnings grows to over 5,200... On the plus
side of the balance actual locking bugs found by Sparse context
analysis is also rather ... sparse: I found only 3 such commits in
the last 3 years. So the rate of false positives and the
maintenance overhead is rather high and there appears to be no
active policy in place to achieve a zero-warnings baseline to move
the annotations & fixers to developers who introduce new code.
Clang context analysis is more complete and more aggressive in
trying to find bugs, at least in principle. Plus it has a different
model to enabling it: it's enabled subsystem by subsystem, which
results in zero warnings on all relevant kernel builds (as far as
our testing managed to cover it). Which allowed us to enable it by
default, similar to other compiler warnings, with the expectation
that there are no warnings going forward. This enforces a
zero-warnings baseline on clang-22+ builds (Which are still limited
in distribution, admittedly)
Hopefully the Clang approach can lead to a more maintainable
zero-warnings status quo and policy, with more and more subsystems
and drivers enabling the feature. Context tracking can be enabled
for all kernel code via WARN_CONTEXT_ANALYSIS_ALL=y (default
disabled), but this will generate a lot of false positives.
( Having said that, Sparse support could still be added back,
if anyone is interested - the removal patch is still
relatively straightforward to revert at this stage. )
Rust integration updates: (Alice Ryhl, Fujita Tomonori, Boqun Feng)
- Add support for Atomic<i8/i16/bool> and replace most Rust native
AtomicBool usages with Atomic<bool>
- Clean up LockClassKey and improve its documentation
- Add missing Send and Sync trait implementation for SetOnce
- Make ARef Unpin as it is supposed to be
- Add __rust_helper to a few Rust helpers as a preparation for
helper LTO
- Inline various lock related functions to avoid additional function
calls
WW mutexes:
- Extend ww_mutex tests and other test-ww_mutex updates (John
Stultz)
Misc fixes and cleanups:
- rcu: Mark lockdep_assert_rcu_helper() __always_inline (Arnd
Bergmann)
- locking/local_lock: Include more missing headers (Peter Zijlstra)
- seqlock: fix scoped_seqlock_read kernel-doc (Randy Dunlap)
- rust: sync: Replace `kernel::c_str!` with C-Strings (Tamir
Duberstein)"
* tag 'locking-core-2026-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (90 commits)
locking/rwlock: Fix write_trylock_irqsave() with CONFIG_INLINE_WRITE_TRYLOCK
rcu: Mark lockdep_assert_rcu_helper() __always_inline
compiler-context-analysis: Remove __assume_ctx_lock from initializers
tomoyo: Use scoped init guard
crypto: Use scoped init guard
kcov: Use scoped init guard
compiler-context-analysis: Introduce scoped init guards
cleanup: Make __DEFINE_LOCK_GUARD handle commas in initializers
seqlock: fix scoped_seqlock_read kernel-doc
tools: Update context analysis macros in compiler_types.h
rust: sync: Replace `kernel::c_str!` with C-Strings
rust: sync: Inline various lock related methods
rust: helpers: Move #define __rust_helper out of atomic.c
rust: wait: Add __rust_helper to helpers
rust: time: Add __rust_helper to helpers
rust: task: Add __rust_helper to helpers
rust: sync: Add __rust_helper to helpers
rust: refcount: Add __rust_helper to helpers
rust: rcu: Add __rust_helper to helpers
rust: processor: Add __rust_helper to helpers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Add '__rust_helper' annotation to the C helpers
This is needed to inline these helpers into Rust code
- Remove imports available via the prelude, treewide
This was possible thanks to a new lint in Klint that Gary has
implemented -- more Klint-related changes, including initial
upstream support, are coming
- Deduplicate pin-init flags
'kernel' crate:
- Add support for calling a function exactly once with the new
'do_once_lite!' macro (and 'OnceLite' type)
Based on this, add 'pr_*_once!' macros to print only once
- Add 'impl_flags!' macro for defining common bitflags operations:
impl_flags!(
/// Represents multiple permissions.
#[derive(Debug, Clone, Default, Copy, PartialEq, Eq)]
pub struct Permissions(u32);
/// Represents a single permission.
#[derive(Debug, Clone, Copy, PartialEq, Eq)]
pub enum Permission {
/// Read permission.
Read = 1 << 0,
/// Write permission.
Write = 1 << 1,
/// Execute permission.
Execute = 1 << 2,
}
);
let mut f: Permissions = Permission::Read | Permission::Write;
assert!(f.contains(Permission::Read));
assert!(!f.contains(Permission::Execute));
f |= Permission::Execute;
assert!(f.contains(Permission::Execute));
let f2: Permissions = Permission::Write | Permission::Execute;
assert!((f ^ f2).contains(Permission::Read));
assert!(!(f ^ f2).contains(Permission::Write));
- 'bug' module: support 'CONFIG_DEBUG_BUGVERBOSE_DETAILED' in the
'warn_on!' macro in order to show the evaluated condition alongside
the file path:
------------[ cut here ]------------
WARNING: [val == 1] linux/samples/rust/rust_minimal.rs:27 at ...
Modules linked in: rust_minimal(+)
- Add safety module with 'unsafe_precondition_assert!' macro,
currently a wrapper for 'debug_assert!', intended to mark the
validation of safety preconditions where possible:
/// # Safety
///
/// The caller must ensure that `index` is less than `N`.
unsafe fn set_unchecked(&mut self, index: usize, value: T) {
unsafe_precondition_assert!(
index < N,
"set_unchecked() requires index ({index}) < N ({N})"
);
...
}
- Add instructions to 'build_assert!' documentation requesting to
always inline functions when used with function arguments
- 'ptr' module: replace 'build_assert!' with a 'const' one
- 'rbtree' module: reduce unsafe blocks on pointer derefs
- 'transmute' module: implement 'FromBytes' and 'AsBytes' for
inhabited ZSTs, and use it in Nova
- More treewide replacements of 'c_str!' with C string literals
'macros' crate:
- Rewrite most procedural macros ('module!', 'concat_idents!',
'#[export]', '#[vtable]', '#[kunit_tests]') to use the 'syn'
parsing library which we introduced last c |
