| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- Documentation update: Add a note about argument and return value
fetching is the best effort because it depends on the type.
- objpool: Fix to make internal global variables static in
test_objpool.c.
- kprobes: Unify kprobes_exceptions_nofify() prototypes. There are the
same prototypes in asm/kprobes.h for some architectures, but some of
them are missing the prototype and it causes a warning. So move the
prototype into linux/kprobes.h.
- tracing: Fix to check the tracepoint event and return event at
parsing stage. The tracepoint event doesn't support %return but if
$retval exists, it will be converted to %return silently. This finds
that case and rejects it.
- tracing: Fix the order of the descriptions about the parameters of
__kprobe_event_gen_cmd_start() to be consistent with the argument
list of the function.
* tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobes: Fix the order of argument descriptions
tracing: fprobe-event: Fix to check tracepoint event and return
kprobes: unify kprobes_exceptions_nofify() prototypes
lib: test_objpool: make global variables static
Documentation: tracing: Add a note about argument and retval access
|
|
The order of descriptions should be consistent with the argument list of
the function, so "kretprobe" should be the second one.
int __kprobe_event_gen_cmd_start(struct dynevent_cmd *cmd, bool kretprobe,
const char *name, const char *loc, ...)
Link: https://lore.kernel.org/all/20231031041305.3363712-1-yujie.liu@intel.com/
Fixes: 2a588dd1d5d6 ("tracing: Add kprobe event command generation functions")
Suggested-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- don't leave pages decrypted for DMA in encrypted memory setups linger
around on failure (Petr Tesarik)
- fix an out of bounds access in the new dynamic swiotlb code (Petr
Tesarik)
- fix dma_addressing_limited for systems with weird physical memory
layouts (Jia He)
* tag 'dma-mapping-6.7-2023-11-10' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: fix out-of-bounds TLB allocations with CONFIG_SWIOTLB_DYNAMIC
dma-mapping: fix dma_addressing_limited() if dma_range_map can't cover all system RAM
dma-mapping: move dma_addressing_limited() out of line
swiotlb: do not free decrypted pages if dynamic
|
|
Fix to check the tracepoint event is not valid with $retval.
The commit 08c9306fc2e3 ("tracing/fprobe-event: Assume fprobe is
a return event by $retval") introduced automatic return probe
conversion with $retval. But since tracepoint event does not
support return probe, $retval is not acceptable.
Without this fix, ftracetest, tprobe_syntax_errors.tc fails;
[22] Tracepoint probe event parser error log check [FAIL]
----
# tail 22-tprobe_syntax_errors.tc-log.mRKroL
+ ftrace_errlog_check trace_fprobe t kfree ^$retval dynamic_events
+ printf %s t kfree
+ wc -c
+ pos=8
+ printf %s t kfree ^$retval
+ tr -d ^
+ command=t kfree $retval
+ echo Test command: t kfree $retval
Test command: t kfree $retval
+ echo
----
So 't kfree $retval' should fail (tracepoint doesn't support
return probe) but passed it.
Link: https://lore.kernel.org/all/169944555933.45057.12831706585287704173.stgit@devnote2/
Fixes: 08c9306fc2e3 ("tracing/fprobe-event: Assume fprobe is a return event by $retval")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and bpf.
Current release - regressions:
- sched: fix SKB_NOT_DROPPED_YET splat under debug config
Current release - new code bugs:
- tcp:
- fix usec timestamps with TCP fastopen
- fix possible out-of-bounds reads in tcp_hash_fail()
- fix SYN option room calculation for TCP-AO
- tcp_sigpool: fix some off by one bugs
- bpf: fix compilation error without CGROUPS
- ptp:
- ptp_read() should not release queue
- fix tsevqs corruption
Previous releases - regressions:
- llc: verify mac len before reading mac header
Previous releases - always broken:
- bpf:
- fix check_stack_write_fixed_off() to correctly spill imm
- fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END
- check map->usercnt after timer->timer is assigned
- dsa: lan9303: consequently nested-lock physical MDIO
- dccp/tcp: call security_inet_conn_request() after setting IP addr
- tg3: fix the TX ring stall due to incorrect full ring handling
- phylink: initialize carrier state at creation
- ice: fix direction of VF rules in switchdev mode
Misc:
- fill in a bunch of missing MODULE_DESCRIPTION()s, more to come"
* tag 'net-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
net: ti: icss-iep: fix setting counter value
ptp: fix corrupted list in ptp_open
ptp: ptp_read should not release queue
net_sched: sch_fq: better validate TCA_FQ_WEIGHTS and TCA_FQ_PRIOMAP
net: kcm: fill in MODULE_DESCRIPTION()
net/sched: act_ct: Always fill offloading tuple iifidx
netfilter: nat: fix ipv6 nat redirect with mapped and scoped addresses
netfilter: xt_recent: fix (increase) ipv6 literal buffer length
ipvs: add missing module descriptions
netfilter: nf_tables: remove catchall element in GC sync path
netfilter: add missing module descriptions
drivers/net/ppp: use standard array-copy-function
net: enetc: shorten enetc_setup_xdp_prog() error message to fit NETLINK_MAX_FMTMSG_LEN
virtio/vsock: Fix uninit-value in virtio_transport_recv_pkt()
r8169: respect userspace disabling IFF_MULTICAST
selftests/bpf: get trusted cgrp from bpf_iter__cgroup directly
bpf: Let verifier consider {task,cgroup} is trusted in bpf_iter_reg
net: phylink: initialize carrier state at creation
test/vsock: add dobule bind connect test
test/vsock: refactor vsock_accept
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull RCU fixes from Frederic Weisbecker:
- Fix a lock inversion between scheduler and RCU introduced in
v6.2-rc4. The scenario could trigger on any user of RCU_NOCB
(mostly Android but also nohz_full)
- Fix PF_IDLE semantic changes introduced in v6.6-rc3 breaking
some RCU-Tasks and RCU-Tasks-Trace expectations as to what
exactly is an idle task. This resulted in potential spurious
stalls and warnings.
* tag 'rcu-fixes-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks:
rcu/tasks-trace: Handle new PF_IDLE semantics
rcu/tasks: Handle new PF_IDLE semantics
rcu: Introduce rcu_cpu_online()
rcu: Break rcu_node_0 --> &rq->__lock order
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb updates from Daniel Thompson:
"Just two patches for you this time!
- During a panic, flush the console before entering kgdb.
This makes things a little easier to comprehend, especially if an
NMI backtrace was triggered on all CPUs just before we enter the
panic routines
- Correcting a couple of misleading (a.k.a. plain wrong) comments"
* tag 'kgdb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kdb: Corrects comment for kdballocenv
kgdb: Flush console before entering kgdb on panic
|
|
Limit the free list length to the size of the IO TLB. Transient pool can be
smaller than IO_TLB_SEGSIZE, but the free list is initialized with the
assumption that the total number of slots is a multiple of IO_TLB_SEGSIZE.
As a result, swiotlb_area_find_slots() may allocate slots past the end of
a transient IO TLB buffer.
Reported-by: Niklas Schnelle <schnelle@linux.ibm.com>
Closes: https://lore.kernel.org/linux-iommu/104a8c8fedffd1ff8a2890983e2ec1c26bff6810.camel@linux.ibm.com/
Fixes: 79636caad361 ("swiotlb: if swiotlb is full, fall back to a transient memory pool")
Cc: stable@vger.kernel.org
Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
BTF_TYPE_SAFE_TRUSTED(struct bpf_iter__task) in verifier.c wanted to
teach BPF verifier that bpf_iter__task -> task is a trusted ptr. But it
doesn't work well.
The reason is, bpf_iter__task -> task would go through btf_ctx_access()
which enforces the reg_type of 'task' is ctx_arg_info->reg_type, and in
task_iter.c, we actually explicitly declare that the
ctx_arg_info->reg_type is PTR_TO_BTF_ID_OR_NULL.
Actually we have a previous case like this[1] where PTR_TRUSTED is added to
the arg flag for map_iter.
This patch sets ctx_arg_info->reg_type is PTR_TO_BTF_ID_OR_NULL |
PTR_TRUSTED in task_reg_info.
Similarly, bpf_cgroup_reg_info -> cgroup is also PTR_TRUSTED since we are
under the protection of cgroup_mutex and we would check cgroup_is_dead()
in __cgroup_iter_seq_show().
This patch is to improve the user experience of the newly introduced
bpf_iter_css_task kfunc before hitting the mainline. The Fixes tag is
pointing to the commit introduced the bpf_iter_css_task kfunc.
Link[1]:https://lore.kernel.org/all/20230706133932.45883-3-aspsk@isovalent.com/
Fixes: 9c66dc94b62a ("bpf: Introduce css_task open-coded iterator kfuncs")
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231107132204.912120-2-zhouchuyi@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
This patch corrects the comment for the kdballocenv function.
The previous comment incorrectly described the function's
parameters and return values.
Signed-off-by: Yuran Pereira <yuran.pereira@hotmail.com>
Link: https://lore.kernel.org/r/DB3PR10MB6835B383B596133EDECEA98AE8ABA@DB3PR10MB6835.EURPRD10.PROD.OUTLOOK.COM
[daniel.thompson@linaro.org: fixed whitespace alignment in new lines]
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
|
|
system RAM
There is an unusual case that the range map covers right up to the top
of system RAM, but leaves a hole somewhere lower down. Then it prevents
the nvme device dma mapping in the checking path of phys_to_dma() and
causes the hangs at boot.
E.g. On an Armv8 Ampere server, the dsdt ACPI table is:
Method (_DMA, 0, Serialized) // _DMA: Direct Memory Access
{
Name (RBUF, ResourceTemplate ()
{
QWordMemory (ResourceConsumer, PosDecode, MinFixed,
MaxFixed, Cacheable, ReadWrite,
0x0000000000000000, // Granularity
0x0000000000000000, // Range Minimum
0x00000000FFFFFFFF, // Range Maximum
0x0000000000000000, // Translation Offset
0x0000000100000000, // Length
,, , AddressRangeMemory, TypeStatic)
QWordMemory (ResourceConsumer, PosDecode, MinFixed,
MaxFixed, Cacheable, ReadWrite,
0x0000000000000000, // Granularity
0x0000006010200000, // Range Minimum
0x000000602FFFFFFF, // Range Maximum
0x0000000000000000, // Translation Offset
0x000000001FE00000, // Length
,, , AddressRangeMemory, TypeStatic)
QWordMemory (ResourceConsumer, PosDecode, MinFixed,
MaxFixed, Cacheable, ReadWrite,
0x0000000000000000, // Granularity
0x00000060F0000000, // Range Minimum
0x00000060FFFFFFFF, // Range Maximum
0x0000000000000000, // Translation Offset
0x0000000010000000, // Length
,, , AddressRangeMemory, TypeStatic)
QWordMemory (ResourceConsumer, PosDecode, MinFixed,
MaxFixed, Cacheable, ReadWrite,
0x0000000000000000, // Granularity
0x0000007000000000, // Range Minimum
0x000003FFFFFFFFFF, // Range Maximum
0x0000000000000000, // Translation Offset
0x0000039000000000, // Length
,, , AddressRangeMemory, TypeStatic)
})
But the System RAM ranges are:
cat /proc/iomem |grep -i ram
90000000-91ffffff : System RAM
92900000-fffbffff : System RAM
880000000-fffffffff : System RAM
8800000000-bff5990fff : System RAM
bff59d0000-bff5a4ffff : System RAM
bff8000000-bfffffffff : System RAM
So some RAM ranges are out of dma_range_map.
Fix it by checking whether each of the system RAM resources can be
properly encompassed within the dma_range_map.
Signed-off-by: Jia He <justin.he@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This patch moves dma_addressing_limited() out of line, serving as a
preliminary step to prevent the introduction of a new publicly accessible
low-level helper when validating whether all system RAM is mapped within
the DMA mapping range.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jia He <justin.he@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial updates from Greg KH:
"Here is the big set of tty/serial driver changes for 6.7-rc1. Included
in here are:
- console/vgacon cleanups and removals from Arnd
- tty core and n_tty cleanups from Jiri
- lots of 8250 driver updates and cleanups
- sc16is7xx serial driver updates
- dt binding updates
- first set of port lock wrapers from Thomas for the printk fixes
coming in future releases
- other small serial and tty core cleanups and updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (193 commits)
serdev: Replace custom code with device_match_acpi_handle()
serdev: Simplify devm_serdev_device_open() function
serdev: Make use of device_set_node()
tty: n_gsm: add copyright Siemens Mobility GmbH
tty: n_gsm: fix race condition in status line change on dead connections
serial: core: Fix runtime PM handling for pending tx
vgacon: fix mips/sibyte build regression
dt-bindings: serial: drop unsupported samsung bindings
tty: serial: samsung: drop earlycon support for unsupported platforms
tty: 8250: Add note for PX-835
tty: 8250: Fix IS-200 PCI ID comment
tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
tty: 8250: Add support for Intashield IX cards
tty: 8250: Add support for additional Brainboxes PX cards
tty: 8250: Fix up PX-803/PX-857
tty: 8250: Fix port count of PX-257
tty: 8250: Add support for Intashield IS-100
tty: 8250: Add support for Brainboxes UP cards
tty: 8250: Add support for additional Brainboxes UC cards
tty: 8250: Remove UC-257 and UC-431
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core updates for 6.7-rc1. Nothing major in
here at all, just a small number of changes including:
- minor cleanups and updates from Andy Shevchenko
- __counted_by addition
- firmware_loader update for aborting loads cleaner
- other minor changes, details in the shortlog
- documentation update
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (21 commits)
firmware_loader: Abort all upcoming firmware load request once reboot triggered
firmware_loader: Refactor kill_pending_fw_fallback_reqs()
Documentation: security-bugs.rst: linux-distros relaxed their rules
driver core: Release all resources during unbind before updating device links
driver core: class: remove boilerplate code
driver core: platform: Annotate struct irq_affinity_devres with __counted_by
resource: Constify resource crosscheck APIs
resource: Unify next_resource() and next_resource_skip_children()
resource: Reuse for_each_resource() macro
PCI: Implement custom llseek for sysfs resource entries
kernfs: sysfs: support custom llseek method for sysfs entries
debugfs: Fix __rcu type comparison warning
device property: Replace custom implementation of COUNT_ARGS()
drivers: base: test: Make property entry API test modular
driver core: Add missing parameter description to __fwnode_link_add()
device property: Clarify usage scope of some struct fwnode_handle members
devres: rename the first parameter of devm_add_action(_or_reset)
driver core: platform: Unify the firmware node type check
driver core: platform: Use temporary variable in platform_device_add()
driver core: platform: Refactor error path in a couple places
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Remove eventfs_file descriptor
This is the biggest change, and the second part of making eventfs
create its files dynamically.
In 6.6 the first part was added, and that maintained a one to one
mapping between eventfs meta descriptors and the directories and file
inodes and dentries that were dynamically created. The directories
were represented by a eventfs_inode and the files were represented by
a eventfs_file.
In v6.7 the eventfs_file is removed. As all events have the same
directory make up (sched_switch has an "enable", "id", "format", etc
files), the handing of what files are underneath each leaf eventfs
directory is moved back to the tracing subsystem via a callback.
When an event is added to the eventfs, it registers an array of
evenfs_entry's. These hold the names of the files and the callbacks
to call when the file is referenced. The callback gets the name so
that the same callback may be used by multiple files. The callback
then supplies the filesystem_operations structure needed to create
this file.
This has brought the memory footprint of creating multiple eventfs
instances down by 2 megs each!
- User events now has persistent events that are not associated to a
single processes. These are privileged events that hang around even
if no process is attached to them
- Clean up of seq_buf
There's talk about using seq_buf more to replace strscpy() and
friends. But this also requires some minor modifications of seq_buf
to be able to do this
- Expand instance ring buffers individually
Currently if boot up creates an instance, and a trace event is
enabled on that instance, the ring buffer for that instance and the
top level ring buffer are expanded (1.4 MB per CPU). This wastes
memory as this happens when nothing is using the top level instance
- Other minor clean ups and fixes
* tag 'trace-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (34 commits)
seq_buf: Export seq_buf_puts()
seq_buf: Export seq_buf_putc()
eventfs: Use simple_recursive_removal() to clean up dentries
eventfs: Remove special processing of dput() of events directory
eventfs: Delete eventfs_inode when the last dentry is freed
eventfs: Hold eventfs_mutex when calling callback functions
eventfs: Save ownership and mode
eventfs: Test for ei->is_freed when accessing ei->dentry
eventfs: Have a free_ei() that just frees the eventfs_inode
eventfs: Remove "is_freed" union with rcu head
eventfs: Fix kerneldoc of eventfs_remove_rec()
tracing: Have the user copy of synthetic event address use correct context
eventfs: Remove extra dget() in eventfs_create_events_dir()
tracing: Have trace_event_file have ref counters
seq_buf: Introduce DECLARE_SEQ_BUF and seq_buf_str()
eventfs: Fix typo in eventfs_inode union comment
eventfs: Fix WARN_ON() in create_file_dentry()
powerpc: Remove initialisation of readpos
tracing/histograms: Simplify last_cmd_set()
seq_buf: fix a misleading comment
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Another preparation step for introducing printk kthreads. The main
piece is a per-console lock with several features:
- Support three priorities: normal, emergency, and panic. They will
be defined by a context where the lock is taken. A context with a
higher priority is allowed to take over the lock from a context
with a lower one.
The plan is to use the emergency context for Oops and WARN()
messages, and also by watchdogs.
The panic() context will be used on panic CPU.
- The owner might enter/exit regions where it is not safe to take
over the lock. It allows the take over the lock a safe way in the
middle of a message.
For example, serial drivers emit characters one by one. And the
serial port is in a safe state in between.
Only the final console_flush_in_panic() will be allowed to take
over the lock even in the unsafe state (last chance, pray, and
hope).
- A higher priority context might busy wait with a timeout. The
current owner is informed about the waiter and releases the lock
on exit from the unsafe state.
- The new lock is safe even in atomic contexts, including NMI.
Another change is a safe manipulation of per-console sequence number
counter under the new lock.
- simple_strntoull() micro-optimization
- Reduce pr_flush() pooling time.
- Calm down false warning about possible buffer invalid access to
console buffers when CONFIG_PRINTK is disabled.
[ .. and Thomas Gleixner wants to point out that while several of the
commits are attributed to him, he only authored the early versions of
said commits, and that John Ogness and Petr Mladek have been the ones
who sorted out the details and really should be those who get the
credit - Linus ]
* tag 'printk-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
vsprintf: uninline simple_strntoull(), reorder arguments
printk: printk: Remove unnecessary statements＇len = 0;＇
printk: Reduce pr_flush() pooling time
printk: fix illegal pbufs access for !CONFIG_PRINTK
printk: nbcon: Allow drivers to mark unsafe regions and check state
printk: nbcon: Add emit function and callback function for atomic printing
printk: nbcon: Add sequence handling
printk: nbcon: Add ownership state functions
printk: nbcon: Add buffer management
printk: Make static printk buffers available to nbcon
printk: nbcon: Add acquire/release logic
printk: Add non-BKL (nbcon) console basic infrastructure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching update from Petr Mladek:
- Add missing newline character to avoid waiting for a continuous
message
* tag 'livepatching-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
livepatch: Fix missing newline character in klp_resolve_symbols()
|
|
Fix these two error paths:
1. When set_memory_decrypted() fails, pages may be left fully or partially
decrypted.
2. Decrypted pages may be freed if swiotlb_alloc_tlb() determines that the
physical address is too high.
To fix the first issue, call set_memory_encrypted() on the allocated region
after a failed decryption attempt. If that also fails, leak the pages.
To fix the second issue, check that the TLB physical address is below the
requested limit before decrypting.
Let the caller differentiate between unsuitable physical address (=> retry
from a lower zone) and allocation failures (=> no point in retrying).
Cc: stable@vger.kernel.org
Fixes: 79636caad361 ("swiotlb: if swiotlb is full, fall back to a transient memory pool")
Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"As usual, lots of singleton and doubleton patches all over the tree
and there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- 'kdump: use generic functions to simplify crashkernel reservation
in arch', from Baoquan He. This is mainly cleanups and
consolidation of the 'crashkernel=' kernel parameter handling
- After much discussion, David Laight's 'minmax: Relax type checks in
min() and max()' is here. Hopefully reduces some typecasting and
the use of min_t() and max_t()
- A group of patches from Oleg Nesterov which clean up and slightly
fix our handling of reads from /proc/PID/task/... and which remove
task_struct.thread_group"
* tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits)
scripts/gdb/vmalloc: disable on no-MMU
scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n
.mailmap: add address mapping for Tomeu Vizoso
mailmap: update email address for Claudiu Beznea
tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions
.mailmap: map Benjamin Poirier's address
scripts/gdb: add lx_current support for riscv
ocfs2: fix a spelling typo in comment
proc: test ProtectionKey in proc-empty-vm test
proc: fix proc-empty-vm test with vsyscall
fs/proc/base.c: remove unneeded semicolon
do_io_accounting: use sig->stats_lock
do_io_accounting: use __for_each_thread()
ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error()
ocfs2: fix a typo in a comment
scripts/show_delta: add __main__ judgement before main code
treewide: mark stuff as __ro_after_init
fs: ocfs2: check status values
proc: test /proc/${pid}/statm
compiler.h: move __is_constexpr() to compiler.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series 'Fixes and cleanups to compaction'
- Joel Fernandes has a patchset ('Optimize mremap during mutual
alignment within PMD') which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i
the following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series 'Do not try to access unaccepted memory' Adrian
Hunter provides some fixups for the recently-added 'unaccepted
memory' feature. To increase the feature's checking coverage. 'Plug
a few gaps where RAM is exposed without checking if it is
unaccepted memory'
- In the series 'cleanups for lockless slab shrink' Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series 'use refcount+RCU method to
implement lockless slab shrink'
- David Hildenbrand contributes some maintenance work for the rmap
code in the series 'Anon rmap cleanups'
- Kefeng Wang does more folio conversions and some maintenance work
in the migration code. Series 'mm: migrate: more folio conversion
and unification'
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series 'Add and use bdev_getblk()'
- In the series 'Use nth_page() in place of direct struct page
manipulation' Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames
- In the series 'mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO' has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of
gigantic pages are in use
- Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code
rationalization and folio conversions in the hugetlb code
- Yin Fengwei has improved mlock()'s handling of large folios in the
series 'support large folio for mlock'
- In the series 'Expose swapcache stat for memcg v1' Liu Shixin has
added statistics for memcg v1 users which are available (and
useful) under memcg v2
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named 'MDWE
without inheritance'
- Kefeng Wang has provided the series 'mm: convert numa balancing
functions to use a folio' which does what it says
- In the series 'mm/ksm: add fork-exec support for prctl' Stefan
Roesch makes is possible for a process to propagate KSM treatment
across exec()
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use 'high
bandwidth memory' in addition to Optane Data Center Persistent
Memory Modules (DCPMM). The series is named 'memory tiering:
calculate abstract distance based on ACPI HMAT'
- In the series 'Smart scanning mode for KSM' Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in
the series 'mm: memcg: fix tracking of pending stats updates
values'
- In the series 'Implement IOCTL to get and optionally clear info
about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap
which permits us to atomically read-then-clear page softdirty
state. This is mainly used by CRIU
- Hugh Dickins contributed the series 'shmem,tmpfs: general
maintenance', a bunch of relatively minor maintenance tweaks to
this code
- Matthew Wilcox has increased the use of the VMA lock over
file-backed page faults in the series 'Handle more faults under the
VMA lock'. Some rationalizations of the fault path became possible
as a result
- In the series 'mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()' David Hildenbrand has implemented some
cleanups and folio conversions
- In the series 'various improvements to the GUP interface' Lorenzo
Stoakes has simplified and improved the GUP interface with an eye
to providing groundwork for future improvements
- Andrey Konovalov has sent along the series 'kasan: assorted fixes
and improvements' which does those things
- Some page allocator maintenance work from Kemeng Shi in the series
'Two minor cleanups to break_down_buddy_pages'
- In thes series 'New selftest for mm' Breno Leitao has developed
another MM self test which tickles a race we had between madvise()
and page faults
- In the series 'Add folio_end_read' Matthew Wilcox provides cleanups
and an optimization to the core pagecache code
- Nhat Pham has added memcg accounting for hugetlb memory in the
series 'hugetlb memcg accounting'
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series 'Abstract vma_merge() and split_vma()'
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series 'Fix page_owner's use of free timestamps'
- Lorenzo Stoakes has fixed the handling of new mappings of sealed
files in the series 'permit write-sealed memfd read-only shared
mappings'
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series 'Batch hugetlb vmemmap modification operations'
- Some buffer_head folio conversions and cleanups from Matthew Wilcox
in the series 'Finish the create_empty_buffers() transition'
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the
series 'mm: PCP high auto-tuning'
- Roman Gushchin has contributed the patchset 'mm: improve
performance of accounted kernel memory allocations' which improves
their performance by ~30% as measured by a micro-benchmark
- folio conversions from Kefeng Wang in the series 'mm: convert page
cpupid functions to folios'
- Some kmemleak fixups in Liu Shixin's series 'Some bugfix about
kmemleak'
- Qi Zheng has improved our handling of memoryless nodes by keeping
them off the allocation fallback list. This is done in the series
'handle memoryless nodes more appropriately'
- khugepaged conversions from Vishal Moola in the series 'Some
khugepaged folio conversions'"
[ bcachefs conflicts with the dynamically allocated shrinkers have been
resolved as per Stephen Rothwell in
https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/
with help from Qi Zheng.
The clone3 test filtering conflict was half-arsed by yours truly ]
* tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits)
mm/damon/sysfs: update monitoring target regions for online input commit
mm/damon/sysfs: remove requested targets when online-commit inputs
selftests: add a sanity check for zswap
Documentation: maple_tree: fix word spelling error
mm/vmalloc: fix the unchecked dereference warning in vread_iter()
zswap: export compression failure stats
Documentation: ubsan: drop "the" from article title
mempolicy: migration attempt to match interleave nodes
mempolicy: mmap_lock is not needed while migrating folios
mempolicy: alloc_pages_mpol() for NUMA policy without vma
mm: add page_rmappable_folio() wrapper
mempolicy: remove confusing MPOL_MF_LAZY dead code
mempolicy: mpol_shared_policy_init() without pseudo-vma
mempolicy trivia: use pgoff_t in shared mempolicy tree
mempolicy trivia: slightly more consistent naming
mempolicy trivia: delete those ancient pr_debug()s
mempolicy: fix migrate_pages(2) syscall return nr_failed
kernfs: drop shared NUMA mempolicy hooks
hugetlbfs: drop shared NUMA mempolicy pretence
mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add virtual-address based lskcipher interface
- Optimise ahash/shash performance in light of costly indirect calls
- Remove ahash alignmask attribute
Algorithms:
- Improve AES/XTS performance of 6-way unrolling for ppc
- Remove some uses of obsolete algorithms (md4, md5, sha1)
- Add FIPS 202 SHA-3 support in pkcs1pad
- Add fast path for single-page messages in adiantum
- Remove zlib-deflate
Drivers:
- Add support for S4 in meson RNG driver
- Add STM32MP13x support in stm32
- Add hwrng interface support in qcom-rng
- Add support for deflate algorithm in hisilicon/zip"
* tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (283 commits)
crypto: adiantum - flush destination page before unmapping
crypto: testmgr - move pkcs1pad(rsa,sha3-*) to correct place
Documentation/module-signing.txt: bring up to date
module: enable automatic module signing with FIPS 202 SHA-3
crypto: asymmetric_keys - allow FIPS 202 SHA-3 signatures
crypto: rsa-pkcs1pad - Add FIPS 202 SHA-3 support
crypto: FIPS 202 SHA-3 register in hash info for IMA
x509: Add OIDs for FIPS 202 SHA-3 hash and signatures
crypto: ahash - optimize performance when wrapping shash
crypto: ahash - check for shash type instead of not ahash type
crypto: hash - move "ahash wrapping shash" functions to ahash.c
crypto: talitos - stop using crypto_ahash::init
crypto: chelsio - stop using crypto_ahash::init
crypto: ahash - improve file comment
crypto: ahash - remove struct ahash_request_priv
crypto: ahash - remove crypto_ahash_alignmask
crypto: gcm - stop using alignmask of ahash
crypto: chacha20poly1305 - stop using alignmask of ahash
crypto: ccm - stop using alignmask of ahash
net: ipv6: stop checking crypto_ahash_alignmask
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Frameworks:
- Allow all MFD Cell properties to be filled in dynamically at
runtime
- Skip disabled device nodes and continue to look for subsequent
devices
New Device Support:
- Add support for Lunar Lake-M PCI to Intel LPSS PCI
- Add support for Denverton to Intel ICH LPC
New Functionality:
- Add support for Clocks to Texas Instruments TWL* Core
- Add support for Interrupts to STMicroelectronics STM32 Timers
Fix-ups:
- Convert to new devm-* (managed) power-off API
- Remove superfluous code
- Bunch of Device Tree additions, conversions and adaptions
- Simplify obtaining resources (memory, device data) using unified
API helpers
- Trivial coding-style / spelling type clean-ups
- Constify / staticify changes
- Expand or edit on existing documentation
- Convert some Regmap configurations to use the Maple Tree cache
- Apply new __counted_by() annotation to several data structures
containing flexible arrays
- Replace strncpy() with strscpy()
Bug Fixes:
- Remove double put creating reference imbalances
- Ensure headphone/lineout detection gets set when booting with ACPI"
* tag 'mfd-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (73 commits)
mfd: lpc_ich: Mark *_gpio_offsets data with const
spmi: rename spmi device lookup helper
spmi: document spmi_device_from_of() refcounting
dt-bindings: mfd: armltd: Move Arm board syscon's to separate schema
mfd: rk8xx: Add support for RK806 power off
mfd: rk8xx: Add support for standard system-power-controller property
dt-bindings: mfd: rk806: Allow system-power-controller property
dt-bindings: mfd: rk8xx: Deprecate rockchip,system-power-controller
dt-bindings: mfd: max8925: Convert to DT schema format
mfd: Use i2c_get_match_data() in a selection of drivers
mfd: Use device_get_match_data() in a bunch of drivers
mfd: mc13xxx-spi/wm831x-spi: Use spi_get_device_match_data()
mfd: motorola-cpcap: Drop unnecessary of_match_device() call
mfd: arizona-spi: Set pdata.hpdet_channel for ACPI enumerated devs
mfd: qcom-spmi-pmic: Switch to EXPORT_SYMBOL_GPL()
mfd: qcom-spmi-pmic: Fix revid implementation
mfd: qcom-spmi-pmic: Fix reference leaks in revid helper
mfd: intel-m10-bmc: Change contact for ABI docs
mfd: max8907: Convert to use maple tree register cache
mfd: max77686: Convert to use maple tree register cache
...
|
|
We consistently switched from kmalloc() to vmalloc() in module
decompression to prevent potential memory allocation failures with large
modules, however vmalloc() is not as memory-efficient and fast as
kmalloc().
Since we don't know in general the size of the workspace required by the
decompression algorithm, it is more reasonable to use kvmalloc()
consistently, also considering that we don't have special memory
requirements here.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
|
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull modules updates from Luis Chamberlain:
"The only thing worth highligthing is that gzip moves to use vmalloc()
instead of kmalloc just as we had a fix for this for zstd on v6.6-rc1.
The rest is regular house keeping, keeping things neat, tidy, and
boring"
[ The kmalloc -> vmalloc conversion is not the right approach.
Unless you know you need huge areas or know you need to use virtual
mappings for some reason (playing with protection bits or whatever),
you should use kvmalloc()/kvfree, which automatically picks the right
allocation model - Linus ]
* tag 'modules-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: Annotate struct module_notes_attrs with __counted_by
module: Fix comment typo
module: Make is_valid_name() return bool
module: Make is_mapping_symbol() return bool
module/decompress: use vmalloc() for gzip decompression workspace
MAINTAINERS: add include/linux/module*.h to modules
module: Clarify documentation of module_param_call()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"To help make the move of sysctls out of kernel/sysctl.c not incur a
size penalty sysctl has been changed to allow us to not require the
sentinel, the final empty element on the sysctl array. Joel Granados
has been doing all this work. On the v6.6 kernel we got the major
infrastructure changes required to support this. For v6.7-rc1 we have
all arch/ and drivers/ modified to remove the sentinel. Both arch and
driver changes have been on linux-next for a bit less than a month. It
is worth re-iterating the value:
- this helps reduce the overall build time size of the kernel and run
time memory consumed by the kernel by about ~64 bytes per array
- the extra 64-byte penalty is no longer inncurred now when we move
sysctls out from kernel/sysctl.c to their own files
For v6.8-rc1 expect removal of all the sentinels and also then the
unneeded check for procname == NULL.
The last two patches are fixes recently merged by Krister Johansen
which allow us again to use softlockup_panic early on boot. This used
to work but the alias work broke it. This is useful for folks who want
to detect softlockups super early rather than wait and spend money on
cloud solutions with nothing but an eventual hung kernel. Although
this hadn't gone through linux-next it's also a stable fix, so we
might as well roll through the fixes now"
* tag 'sysctl-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (23 commits)
watchdog: move softlockup_panic back to early_param
proc: sysctl: prevent aliased sysctls from getting passed to init
intel drm: Remove now superfluous sentinel element from ctl_table array
Drivers: hv: Remove now superfluous sentinel element from ctl_table array
raid: Remove now superfluous sentinel element from ctl_table array
fw loader: Remove the now superfluous sentinel element from ctl_table array
sgi-xp: Remove the now superfluous sentinel element from ctl_table array
vrf: Remove the now superfluous sentinel element from ctl_table array
char-misc: Remove the now superfluous sentinel element from ctl_table array
infiniband: Remove the now superfluous sentinel element from ctl_table array
macintosh: Remove the now superfluous sentinel element from ctl_table array
parport: Remove the now superfluous sentinel element from ctl_table array
scsi: Remove now superfluous sentinel element from ctl_table array
tty: Remove now superfluous sentinel element from ctl_table array
xen: Remove now superfluous sentinel element from ctl_table array
hpet: Remove now superfluous sentinel element from ctl_table array
c-sky: Remove now superfluous sentinel element from ctl_talbe array
powerpc: Remove now superfluous sentinel element from ctl_table arrays
riscv: Remove now superfluous sentinel element from ctl_table array
x86/vdso: Remove now superfluous sentinel element from ctl_table array
...
|
|
BPF_END and BPF_NEG has a different specification for the source bit in
the opcode compared to other ALU/ALU64 instructions, and is either
reserved or use to specify the byte swap endianness. In both cases the
source bit does not encode source operand location, and src_reg is a
reserved field.
backtrack_insn() currently does not differentiate BPF_END and BPF_NEG
from other ALU/ALU64 instructions, which leads to r0 being incorrectly
marked as precise when processing BPF_ALU | BPF_TO_BE | BPF_END
instructions. This commit teaches backtrack_insn() to correctly mark
precision for such case.
While precise tracking of BPF_NEG and other BPF_END instructions are
correct and does not need fixing, this commit opt to process all BPF_NEG
and BPF_END instructions within the same if-clause to better align with
current convention used in the verifier (e.g. check_alu_op).
Fixes: b5dc0163d8fd ("bpf: precise scalar_value tracking")
Cc: stable@vger.kernel.org
Reported-by: Mohamed Mahmoud <mmahmoud@redhat.com>
Closes: https://lore.kernel.org/r/87jzrrwptf.fsf@toke.dk
Tested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: Tao Lyu <tao.lyu@epfl.ch>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20231102053913.12004-2-shung-hsi.yu@suse.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The newly added open-coded css_task iter would try to hold the global
css_set_lock in bpf_iter_css_task_new, so the bpf side has to be careful in
where it allows to use this iter. The mainly concern is dead locking on
css_set_lock. check_css_task_iter_allowlist() in verifier enforced css_task
can only be used in bpf_lsm hooks and sleepable bpf_iter.
This patch relax the allowlist for css_task iter. Any lsm and any iter
(even non-sleepable) and any sleepable are safe since they would not hold
the css_set_lock before entering BPF progs context.
This patch also fixes the misused BPF_TRACE_ITER in
check_css_task_iter_allowlist which compared bpf_prog_type with
bpf_attach_type.
Fixes: 9c66dc94b62ae ("bpf: Introduce css_task open-coded iterator kfuncs")
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231031050438.93297-2-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When there are concurrent uref release and bpf timer init operations,
the following sequence diagram is possible. It will break the guarantee
provided by bpf_timer: bpf_timer |
