| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Fix printf format warning for bprintf
sunrpc uses a trace_printk() that triggers a printf warning during
the compile. Move the __printf() attribute around for when debugging
is not enabled the warning will go away
- Remove redundant check for EVENT_FILE_FL_FREED in
event_filter_write()
The FREED flag is checked in the call to event_file_file() and then
checked again right afterward, which is unneeded
- Clean up event_file_file() and event_file_data() helpers
These helper functions played a different role in the past, but now
with eventfs, the READ_ONCE() isn't needed. Simplify the code a bit
and also add a warning to event_file_data() if the file or its data
is not present
- Remove updating file->private_data in tracing open
All access to the file private data is handled by the helper
functions, which do not use file->private_data. Stop updating it on
open
- Show ENUM names in function arguments via BTF in function tracing
When showing the function arguments when func-args option is set for
function tracing, if one of the arguments is found to be an enum,
show the name of the enum instead of its number
- Add new trace_call__##name() API for tracepoints
Tracepoints are enabled via static_branch() blocks, where when not
enabled, there's only a nop that is in the code where the execution
will just skip over it. When tracing is enabled, the nop is converted
to a direct jump to the tracepoint code. Sometimes more calculations
are required to be performed to update the parameters of the
tracepoint. In this case, trace_##name##_enabled() is called which is
a static_branch() that gets enabled only when the tracepoint is
enabled. This allows the extra calculations to also be skipped by the
nop:
if (trace_foo_enabled()) {
x = bar();
trace_foo(x);
}
Where the x=bar() is only performed when foo is enabled. The problem
with this approach is that there's now two static_branch() calls. One
for checking if the tracepoint is enabled, and then again to know if
the tracepoint should be called. The second one is redundant
Introduce trace_call__foo() that will call the foo() tracepoint
directly without doing a static_branch():
if (trace_foo_enabled()) {
x = bar();
trace_call__foo();
}
- Update various locations to use the new trace_call__##name() API
- Move snapshot code out of trace.c
Cleaning up trace.c to not be a "dump all", move the snapshot code
out of it and into a new trace_snapshot.c file
- Clean up some "%*.s" to "%*s"
- Allow boot kernel command line options to be called multiple times
Have options like:
ftrace_filter=foo ftrace_filter=bar ftrace_filter=zoo
Equal to:
ftrace_filter=foo,bar,zoo
- Fix ipi_raise event CPU field to be a CPU field
The ipi_raise target_cpus field is defined as a __bitmask(). There is
now a __cpumask() field definition. Update the field to use that
- Have hist_field_name() use a snprintf() and not a series of strcat()
It's safer to use snprintf() that a series of strcat()
- Fix tracepoint regfunc balancing
A tracepoint can define a "reg" and "unreg" function that gets called
before the tracepoint is enabled, and after it is disabled
respectively. But on error, after the "reg" func is called and the
tracepoint is not enabled, the "unreg" function is not called to tear
down what the "reg" function performed
- Fix output that shows what histograms are enabled
Event variables are displayed incorrectly in the histogram output
Instead of "sched.sched_wakeup.$var", it is showing
"$sched.sched_wakeup.var" where the '$' is in the incorrect location
- Some other simple cleanups
* tag 'trace-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (24 commits)
selftests/ftrace: Add test case for fully-qualified variable references
tracing: Fix fully-qualified variable reference printing in histograms
tracepoint: balance regfunc() on func_add() failure in tracepoint_add_func()
tracing: Rebuild full_name on each hist_field_name() call
tracing: Report ipi_raise target CPUs as cpumask
tracing: Remove duplicate latency_fsnotify() stub
tracing: Preserve repeated trace_trigger boot parameters
tracing: Append repeated boot-time tracing parameters
tracing: Remove spurious default precision from show_event_trigger/filter formats
cpufreq: Use trace_call__##name() at guarded tracepoint call sites
tracing: Remove tracing_alloc_snapshot() when snapshot isn't defined
tracing: Move snapshot code out of trace.c and into trace_snapshot.c
mm: damon: Use trace_call__##name() at guarded tracepoint call sites
btrfs: Use trace_call__##name() at guarded tracepoint call sites
spi: Use trace_call__##name() at guarded tracepoint call sites
i2c: Use trace_call__##name() at guarded tracepoint call sites
kernel: Use trace_call__##name() at guarded tracepoint call sites
tracepoint: Add trace_call__##name() API
tracing: trace_mmap.h: fix a kernel-doc warning
tracing: Pretty-print enum parameters in function arguments
...
|
|
Currently, print_function_args() prints enum parameter values
in decimal format, reducing trace log readability.
Use BTF information to resolve enum parameters and print their
symbolic names (where available). This improves readability by
showing meaningful identifiers instead of raw numbers.
Before:
mod_memcg_lruvec_state(lruvec=0xffff..., idx=5, val=320)
After:
mod_memcg_lruvec_state(lruvec=0xffff..., idx=5 [NR_SLAB_RECLAIMABLE_B], val=320)
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://patch.msgid.link/20260209071949.4040193-1-dolinux.peng@gmail.com
Signed-off-by: Donglin Peng <pengdonglin@xiaomi.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The sentinel value added by the wrapper macros __print_symbolic() et al
prevents the callers from adding their own trailing comma. This makes
constructing symbol list dynamically based on kconfig values tedious.
Drop the sentinel elements, so callers can either specify the trailing
comma or not, just like in regular array initializers.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260311-hrtimer-cleanups-v1-2-095357392669@linutronix.de
|
|
Add support for displaying bitmasks in human-readable list format (e.g.,
0,2-5,7) in addition to the default hexadecimal bitmap representation.
This is particularly useful when tracing CPU masks and other large
bitmasks where individual bit positions are more meaningful than their
hexadecimal encoding.
When the "bitmask-list" option is enabled, the printk "%*pbl" format
specifier is used to render bitmasks as comma-separated ranges, making
trace output easier to interpret for complex CPU configurations and
large bitmask values.
Link: https://patch.msgid.link/20251226160724.2246493-2-atomlin@atomlin.com
Signed-off-by: Aaron Tomlin <atomlin@atomlin.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Extend tracing option mask to 64 bits
The trace options were defined by a 32 bit variable. This limits the
tracing instances to have a total of 32 different options. As that
limit has been hit, and more options are being added, increase the
option mask to a 64 bit number, doubling the number of options
available.
As this is required for the kprobe topic branches as well as the
tracing topic branch, a separate branch was created and merged into
both.
- Make trace_user_fault_read() available for the rest of tracing
The function trace_user_fault_read() is used by trace_marker file
read to allow reading user space to be done fast and without locking
or allocations. Make this available so that the system call trace
events can use it too.
- Have system call trace events read user space values
Now that the system call trace events callbacks are called in a
faultable context, take advantage of this and read the user space
buffers for various system calls. For example, show the path name of
the openat system call instead of just showing the pointer to that
path name in user space. Also show the contents of the buffer of the
write system call. Several system call trace events are updated to
make tracing into a light weight strace tool for all applications in
the system.
- Update perf system call tracing to do the same
- And a config and syscall_user_buf_size file to control the size of
the buffer
Limit the amount of data that can be read from user space. The
default size is 63 bytes but that can be expanded to 165 bytes.
- Allow the persistent ring buffer to print system calls normally
The persistent ring buffer prints trace events by their type and
ignores the print_fmt. This is because the print_fmt may change from
kernel to kernel. As the system call output is fixed by the system
call ABI itself, there's no reason to limit that. This makes reading
the system call events in the persistent ring buffer much nicer and
easier to understand.
- Add options to show text offset to function profiler
The function profiler that counts the number of times a function is
hit currently lists all functions by its name and offset. But this
becomes ambiguous when there are several functions with the same
name.
Add a tracing option that changes the output to be that of
'_text+offset' instead. Now a user space tool can use this
information to map the '_text+offset' to the unique function it is
counting.
- Report bad dynamic event command
If a bad command is passed to the dynamic_events file, report it
properly in the error log.
- Clean up tracer options
Clean up the tracer option code a bit, by removing some useless code
and also using switch statements instead of a series of if
statements.
- Have tracing options be instance specific
Tracers can have their own options (function tracer, irqsoff tracer,
function graph tracer, etc). But now that the same tracer can be
enabled in multiple trace instances, their options are still global.
The API is per instance, thus changing one affects other instances.
This isn't even consistent, as the option take affect differently
depending on when an tracer started in an instance. Make the options
for instances only affect the instance it is changed under.
- Optimize pid_list lock contention
Whenever the pid_list is read, it uses a spin lock. This happens at
every sched switch. Taking the lock at sched switch can be removed by
instead using a seqlock counter.
- Clean up the trace trigger structures
The trigger code uses two different structures to implement a single
tigger. This was due to trying to reuse code for the two different
types of triggers (always on trigger, and count limited trigger). But
by adding a single field to one structure, the other structure could
be absorbed into the first structure making he code easier to
understand.
- Create a bulk garbage collector for trace triggers
If user space has triggers for several hundreds of events and then
removes them, it can take several seconds to complete. This is
because each removal calls tracepoint_synchronize_unregister() that
can take hundreds of milliseconds to complete.
Instead, create a helper thread that will do the clean up. When a
trigger is removed, it will create the kthread if it isn't already
created, and then add the trigger to a llist. The kthread will take
the items off the llist, call tracepoint_synchronize_unregister(),
and then remove the items it took off. It will then check if there's
more items to free before sleeping.
This makes user space removing all these triggers to finish in less
than a second.
- Allow function tracing of some of the tracing infrastructure code
Because the tracing code can cause recursion issues if it is traced
by the function tracer the entire tracing directory disables function
tracing. But not all of tracing causes issues if it is traced.
Namely, the event tracing code. Add a config that enables some of the
tracing code to be traced to help in debugging it. Note, when this is
enabled, it does add noise to general function tracing, especially if
events are enabled as well (which is a common case).
- Add boot-time backup instance for persistent buffer
The persistent ring buffer is used mostly for kernel crash analysis
in the field. One issue is that if there's a crash, the data in the
persistent ring buffer must be read before tracing can begin using
it. This slows down the boot process. Once tracing starts in the
persistent ring buffer, the old data must be freed and the addresses
no longer match and old events can't be in the buffer with new
events.
Create a way to create a backup buffer that copies the persistent
ring buffer at boot up. Then after a crash, the always on tracer can
begin immediately as well as the normal boot process while the crash
analysis tooling uses the backup buffer. After the backup buffer is
finished being read, it can be removed.
- Enable function graph args and return address options at the same
time
Currently the when reading of arguments in the function graph tracer
is enabled, the option to record the parent function in the entry
event can not be enabled. Update the code so that it can.
- Add new struct_offset() helper macro
Add a new macro that takes a pointer to a structure and a name of one
of its members and it will return the offset of that member. This
allows the ring buffer code to simplify the following:
From: size = struct_size(entry, buf, cnt - sizeof(entry->id));
To: size = struct_offset(entry, id) + cnt;
There should be other simplifications that this macro can help out
with as well
* tag 'trace-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (42 commits)
overflow: Introduce struct_offset() to get offset of member
function_graph: Enable funcgraph-args and funcgraph-retaddr to work simultaneously
tracing: Add boot-time backup of persistent ring buffer
ftrace: Allow tracing of some of the tracing code
tracing: Use strim() in trigger_process_regex() instead of skip_spaces()
tracing: Add bulk garbage collection of freeing event_trigger_data
tracing: Remove unneeded event_mutex lock in event_trigger_regex_release()
tracing: Merge struct event_trigger_ops into struct event_command
tracing: Remove get_trigger_ops() and add count_func() from trigger ops
tracing: Show the tracer options in boot-time created instance
ftrace: Avoid redundant initialization in register_ftrace_direct
tracing: Remove unused variable in tracing_trace_options_show()
fgraph: Make fgraph_no_sleep_time signed
tracing: Convert function graph set_flags() to use a switch() statement
tracing: Have function graph tracer option sleep-time be per instance
tracing: Move graph-time out of function graph options
tracing: Have function graph tracer option funcgraph-irqs be per instance
trace/pid_list: optimize pid_list->lock contention
tracing: Have function graph tracer define options per instance
tracing: Have function tracer define options per instance
...
|
|
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251113150217.3030010-22-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mhiramat/linux into trace/trace/core
Updates to the function profiler adds new options to tracefs. The options
are currently defined by an enum as flags. The added options brings the
number of options over 32, which means they can no longer be held in a 32
bit enum. The TRACE_ITER_* flags are converted to a macro TRACE_ITER(*) to
allow the creation of options to still be done by macros.
This change is intrusive, as it affects all TRACE_ITER* options throughout
the trace code. Merge the branch that added these options and converted
the TRACE_ITER_* enum into a TRACE_ITER(*) macro, to allow the topic
branches to still be developed without conflict.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Since enum trace_iterator_flags is 32bit, the max number of the
option flags is limited to 32 and it is fully used now. To add
a new option, we need to expand it.
So replace the TRACE_ITER_##flag with TRACE_ITER(flag) macro which
is 64bit bitmask.
Link: https://lore.kernel.org/all/176187877103.994619.166076000668757232.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
When the "fields" option is enabled, it prints each trace event field
based on its type. But a dynamic array and a dynamic string can both have
a "char *" type. Printing it as a string can cause escape characters to be
printed and mess up the output of the trace.
For dynamic strings, test if there are any non-printable characters, and
if so, print both the string with the non printable characters as '.', and
the print the hex value of the array.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Takaya Saeki <takayas@google.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/20251028231148.929243047@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Most function arguments that are passed in as unsigned int or unsigned
long are better displayed as hexadecimal than normal integer. For example,
the functions:
static void __create_object(unsigned long ptr, size_t size,
int min_count, gfp_t gfp, unsigned int objflags);
static bool stack_access_ok(struct unwind_state *state, unsigned long _addr,
size_t len);
void __local_bh_disable_ip(unsigned long ip, unsigned int cnt);
Show up in the trace as:
__create_object(ptr=-131387050520576, size=4096, min_count=1, gfp=3264, objflags=0) <-kmem_cache_alloc_noprof
stack_access_ok(state=0xffffc9000233fc98, _addr=-60473102566256, len=8) <-unwind_next_frame
__local_bh_disable_ip(ip=-2127311112, cnt=256) <-handle_softirqs
Instead, by displaying unsigned as hexadecimal, they look more like this:
__create_object(ptr=0xffff8881028d2080, size=0x280, min_count=1, gfp=0x82820, objflags=0x0) <-kmem_cache_alloc_node_noprof
stack_access_ok(state=0xffffc90000003938, _addr=0xffffc90000003930, len=0x8) <-unwind_next_frame
__local_bh_disable_ip(ip=0xffffffff8133cef8, cnt=0x100) <-handle_softirqs
Which is much easier to understand as most unsigned longs are usually just
pointers. Even the "unsigned int cnt" in __local_bh_disable_ip() looks
better as hexadecimal as a lot of flags are passed as unsigned.
Changes since v2: https://lore.kernel.org/20250801111453.01502861@gandalf.local.home
- Use btf_int_encoding() instead of open coding it (Martin KaFai Lau)
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Link: https://lore.kernel.org/20250801165601.7770d65c@gandalf.local.home
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When the "fields" option is set in a trace instance, it ignores the "print fmt"
portion of the trace event and just prints the raw fields defined by the
TP_STRUCT__entry() of the TRACE_EVENT() macro.
The preempt_disable/enable and irq_disable/enable events record only the
caller offset from _stext to save space in the ring buffer. Even though
the "fields" option only prints the fields, it also tries to print what
they represent too, which includes function names.
Add a check in the output of the event field printing to see if the field
name is "caller_offs" or "parent_offs" and then print the function at the
offset from _stext of that field.
Instead of just showing:
irq_disable: caller_offs=0xba634d (12215117) parent_offs=0x39d10e2 (60625122)
Show:
irq_disable: caller_offs=trace_hardirqs_off.part.0+0xad/0x130 0xba634d (12215117) parent_offs=_raw_spin_lock_irqsave+0x62/0x70 0x39d10e2 (60625122)
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250506105131.4b6089a9@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add adjustments to the values of the "fields" output if the buffer is a
persistent ring buffer to adjust the addresses to both the kernel core and
kernel modules if they match a module in the persistent memory and that
module is also loaded.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250325185619.54b85587@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When the "fields" option is enabled, the "print fmt" of the trace event is
ignored and only the fields are printed. But some fields contain function
pointers. Instead of just showing the hex value in this case, show the
function name when possible:
Instead of having:
# echo 1 > options/fields
# cat trace
[..]
kmem_cache_free: call_site=0xffffffffa9afcf31 (-1448095951) ptr=0xffff888124452910 (-131386736039664) name=kmemleak_object
Have it output:
kmem_cache_free: call_site=rcu_do_batch+0x3d1/0x14a0 (-1768960207) ptr=0xffff888132ea5ed0 (854220496) name=kmemleak_object
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250325213919.624181915@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Now that module addresses are saved in the persistent ring buffer, their
addresses can be used to adjust the address in the persistent ring buffer
to the address of the module that is currently loaded.
Instead of blindly using the text_delta that only works for core kernel
code, call the trace_adjust_address() that will see if the address matches
an address saved in the persistent ring buffer, and then uses that against
the matching module if it is loaded.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250506111648.5df7f3ec@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
On some paths in print_event_fields() it takes the trace_event_sem for
read, even though it should always be held when the function is called.
Remove the taking of that mutex and add a lockdep_assert_held_read() to
make sure the trace_event_sem is held when print_event_fields() is called.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250501224128.0b1f0571@batman.local.home
Fixes: 80a76994b2d88 ("tracing: Add "fields" option to show raw trace event fields")
Reported-by: syzbot+441582c1592938fccf09@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6813ff5e.050a0220.14dd7d.001b.GAE@google.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer updates from Steven Rostedt:
- Restructure the persistent memory to have a "scratch" area
Instead of hard coding the KASLR offset in the persistent memory by
the ring buffer, push that work up to the callers of the persistent
memory as they are the ones that need this information. The offsets
and such is not important to the ring buffer logic and it should not
be part of that.
A scratch pad is now created when the caller allocates a ring buffer
from persistent memory by stating how much memory it needs to save.
- Allow where modules are loaded to be saved in the new scratch pad
Save the addresses of modules when they are loaded into the
persistent memory scratch pad.
- A new module_for_each_mod() helper function was created
With the acknowledgement of the module maintainers a new module
helper function was created to iterate over all the currently loaded
modules. This has a callback to be called for each module. This is
needed for when tracing is started in the persistent buffer and the
currently loaded modules need to be saved in the scratch area.
- Expose the last boot information where the kernel and modules were
loaded
The last_boot_info file is updated to print out the addresses of
where the kernel "_text" location was loaded from a previous boot, as
well as where the modules are loaded. If the buffer is recording the
current boot, it only prints "# Current" so that it does not expose
the KASLR offset of the currently running kernel.
- Allow the persistent ring buffer to be released (freed)
To have this in production environments, where the kernel command
line can not be changed easily, the ring buffer needs to be freed
when it is not going to be used. The memory for the buffer will
always be allocated at boot up, but if the system isn't going to
enable tracing, the memory needs to be freed. Allow it to be freed
and added back to the kernel memory pool.
- Allow stack traces to print the function names in the persistent
buffer
Now that the modules are saved in the persistent ring buffer, if the
same modules are loaded, the printing of the function names will
examine the saved modules. If the module is found in the scratch area
and is also loaded, then it will do the offset shift and use kallsyms
to display the function name. If the address is not found, it simply
displays the address from the previous boot in hex.
* tag 'trace-ringbuffer-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Use _text and the kernel offset in last_boot_info
tracing: Show last module text symbols in the stacktrace
ring-buffer: Remove the unused variable bmeta
tracing: Skip update_last_data() if cleared and remove active check for save_mod()
tracing: Initialize scratch_size to zero to prevent UB
tracing: Fix a compilation error without CONFIG_MODULES
tracing: Freeable reserved ring buffer
mm/memblock: Add reserved memory release function
tracing: Update modules to persistent instances when loaded
tracing: Show module names and addresses of last boot
tracing: Have persistent trace instances save module addresses
module: Add module_for_each_mod() function
tracing: Have persistent trace instances save KASLR offset
ring-buffer: Add ring_buffer_meta_scratch()
ring-buffer: Add buffer meta data for persistent ring buffer
ring-buffer: Use kaslr address instead of text delta
ring-buffer: Fix bytes_dropped calculation issue
|
|
Since the previous boot trace buffer can include module text address in
the stacktrace. As same as the kernel text address, convert the module
text address using the module address information.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/174282689201.356346.17647540360450727687.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Convert the event_hash array in trace_output.c to use the generic
hashtable implementation from hashtable.h instead of the manually
implemented hash table.
This simplifies the code and makes it more maintainable by using the
standard hashtable API defined in hashtable.h.
Rename EVENT_HASHSIZE to EVENT_HASH_BITS to properly reflect its new
meaning as the number of bits for the hashtable size.
Link: https://lore.kernel.org/20250323132800.3010783-1-sashal@kernel.org
Link: https://lore.kernel.org/20250319190545.3058319-1-sashal@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Wire up the code to print function arguments in the function tracer.
This functionality can be enabled/disabled during runtime with
options/func-args.
ping-689 [004] b.... 77.170220: dummy_xmit(skb = 0x82904800, dev = 0x882d0000) <-dev_hard_start_xmit
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Guo Ren <guoren@kernel.org>
Cc: Donglin Peng <dolinux.peng@gmail.com>
Cc: Zheng Yejian <zhengyejian@huaweicloud.com>
Link: https://lore.kernel.org/20250227185823.154996172@goodmis.org
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Co-developed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add a function to decode argument types with the help of BTF. Will
be used to display arguments in the function and function graph
tracer.
It can only handle simply arguments and up to FTRACE_REGS_MAX_ARGS number
of arguments. When it hits a max, it will print ", ...":
page_to_skb(vi=0xffff8d53842dc980, rq=0xffff8d53843a0800, page=0xfffffc2e04337c00, offset=6160, len=64, truesize=1536, ...)
And if it hits an argument that is not recognized, it will print the raw
value and the type of argument it is:
make_vfsuid(idmap=0xffffffff87f99db8, fs_userns=0xffffffff87e543c0, kuid=0x0 (STRUCT))
__pti_set_user_pgtbl(pgdp=0xffff8d5384ab47f8, pgd=0x110e74067 (STRUCT))
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Guo Ren <guoren@kernel.org>
Cc: Donglin Peng <dolinux.peng@gmail.com>
Cc: Zheng Yejian <zhengyejian@huaweicloud.com>
Link: https://lore.kernel.org/20250227185822.639418500@goodmis.org
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Co-developed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The TP_printk() portion of a trace event is executed at the time a event
is read from the trace. This can happen seconds, minutes, hours, days,
months, years possibly later since the event was recorded. If the print
format contains a dereference to a string via "%s", and that string was
allocated, there's a chance that string could be freed before it is read
by the trace file.
To protect against such bugs, there are two functions that verify the
event. The first one is test_event_printk(), which is called when the
event is created. It reads the TP_printk() format as well as its arguments
to make sure nothing may be dereferencing a pointer that was not copied
into the ring buffer along with the event. If it is, it will trigger a
WARN_ON().
For strings that use "%s", it is not so easy. The string may not reside in
the ring buffer but may still be valid. Strings that are static and part
of the kernel proper which will not be freed for the life of the running
system, are safe to dereference. But to know if it is a pointer to a
static string or to something on the heap can not be determined until the
event is triggered.
This brings us to the second function that tests for the bad dereferencing
of strings, trace_check_vprintf(). It would walk through the printf format
looking for "%s", and when it finds it, it would validate that the pointer
is safe to read. If not, it would produces a WARN_ON() as well and write
into the ring buffer "[UNSAFE-MEMORY]".
The problem with this is how it used va_list to have vsnprintf() handle
all the cases that it didn't need to check. Instead of re-implementing
vsnprintf(), it would make a copy of the format up to the %s part, and
call vsnprintf() with the current va_list ap variable, where the ap would
then be ready to point at the string in question.
For architectures that passed va_list by reference this was possible. For
architectures that passed it by copy it was not. A test_can_verify()
function was used to differentiate between the two, and if it wasn't
possible, it would disable it.
Even for architectures where this was feasible, it was a stretch to rely
on such a method that is undocumented, and could cause issues later on
with new optimizations of the compiler.
Instead, the first function test_event_printk() was updated to look at
"%s" as well. If the "%s" argument is a pointer outside the event in the
ring buffer, it would find the field type of the event that is the problem
and mark the structure with a new flag called "needs_test". The event
itself will be marked by TRACE_EVENT_FL_TEST_STR to let it be known that
this event has a field that needs to be verified before the event can be
printed using the printf format.
When the event fields are created from the field type structure, the
fields would copy the field type's "needs_test" value.
Finally, before being printed, a new function ignore_event() is called
which will check if the event has the TEST_STR flag set (if not, it
returns false). If the flag is set, it then iterates through the events
fields looking for the ones that have the "needs_test" flag set.
Then it uses the offset field from the field structure to find the pointer
in the ring buffer event. It runs the tests to make sure that pointer is
safe to print and if not, it triggers the WARN_ON() and also adds to the
trace output that the event in question has an unsafe memory access.
The ignore_event() makes the trace_check_vprintf() obsolete so it is
removed.
Link: https://lore.kernel.org/all/CAHk-=wh3uOnqnZPpR0PeLZZtyWbZLboZ7cHLCKRWsocvs9Y7hQ@mail.gmail.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20241217024720.848621576@goodmis.org
Fixes: 5013f454a352c ("tracing: Add check of trace event print fmts for dereferencing pointers")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The scheduler added NEED_RESCHED_LAZY scheduling. Record this state as
part of trace flags and expose it in the need_resched field.
Record and expose NEED_RESCHED_LAZY.
[bigeasy: Commit description, documentation bits.]
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20241122202849.7DfYpJR0@linutronix.de
Reviewed-by: Ankur Arora <ankur.a.arora@oracle.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The issue that unrelated function name is shown on stack trace like
following even though it should be trampoline code address is caused by
the creation of trampoline code in the area where .init.text section
of module was freed after module is loaded.
bash-1344 [002] ..... 43.644608: <stack trace>
=> (MODULE INIT FUNCTION)
=> vfs_write
=> ksys_write
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
To resolve this, when function address of stack trace entry is in
trampoline, output without looking up symbol name.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20241021071454.34610-2-tatsuya.s2862@gmail.com
Signed-off-by: Tatsuya S <tatsuya.s2862@gmail.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
It was possible to enable tracing with no IRQ tracing support. The
tracing infrastructure would then record TRACE_FLAG_IRQS_NOSUPPORT as
the only tracing flag and show an 'X' in the output.
The last user of this feature was PPC32 which managed to implement it
during PowerPC merge in 2009. Since then, it was unused and the PPC32
dependency was finally removed in commit 0ea5ee035133a ("tracing: Remove
PPC32 wart from config TRACING_SUPPORT").
Since the PowerPC merge the code behind !CONFIG_TRACE_IRQFLAGS_SUPPORT
with TRACING enabled can no longer be selected used and the 'X' is not
displayed or recorded.
Remove the CONFIG_TRACE_IRQFLAGS_SUPPORT from the tracing code. Remove
TRACE_FLAG_IRQS_NOSUPPORT.
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20241022110112.XJI8I9T2@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
If the persistent boot mapped ring buffer is used for trace_printk(),
force it to not use the binary versions. trace_printk() by default uses
bin_printf() that only saves the pointer to the format and not the format
itself inside the ring buffer. But for a persistent buffer that is read
after reboot, the pointers to the format strings may not be the same, or
worse, not even exist! Instead, just force the more robust, but slower,
version that does the formatting before saving into the ring buffer.
The boot mapped buffer can now be used for trace_printk and friends!
Using the trace_printk() and the persistent buffer was used to debug the
issue with the osnoise tracer:
Link: https://lore.kernel.org/all/20240822103443.6a6ae051@gandalf.local.home/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineeth Pillai <vineeth@bitbyteword.org>
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alexander Aring <aahringo@redhat.com>
Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "Jonathan Corbet" <corbet@lwn.net>
Link: https://lore.kernel.org/20240823014019.386925800@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The addresses of a stack trace event are relative to the kallsyms. As that
can change between boots, when printing the stack trace from a buffer that
was from the last boot, it needs all the addresses to be added to the
"text_delta" that gives the delta between the addresses of the functions
for the current boot compared to the address of the last boot. Then it can
be passed to kallsyms to find the function name, otherwise it just shows a
useless list of addresses.
Link: https://lkml.kernel.org/r/20240612232027.145807384@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineeth Pillai <vineeth@bitbyteword.org>
Cc: Youssef Esmat <youssefesmat@google.com>
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
For a persistent ring buffer that is saved across boots, if function
tracing was performed in the previous boot, it only saves the address of
the functions and uses "%pS" to print their names. But the current boot,
those functions may be in different locations. The persistent meta-data
saves the text delta between the two boots and can be used to find the
address of the saved function of where it is located in the current boot.
Link: https://lkml.kernel.org/r/20240612232026.988226055@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineeth Pillai <vineeth@bitbyteword.org>
Cc: Youssef Esmat <youssefesmat@google.com>
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
This reverts 60be76eeabb3d ("tracing: Add size check when printing
trace_marker output"). The only reason the precision check was added
was because of a bug that miscalculated the write size of the string into
the ring buffer and it truncated it removing the terminating nul byte. On
reading the trace it crashed the kernel. But this was due to the bug in
the code that happened during development and should never happen in
practice. If anything, the precision can hide bugs where the string in the
ring buffer isn't nul terminated and it will not be checked.
Link: https://lore.kernel.org/all/C7E7AF1A-D30F-4D18-B8E5-AF1EF58004F5@linux.ibm.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240227125706.04279ac2@gandalf.local.home
Link: https://lore.kernel.org/all/20240302111244.3a1674be@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20240304174341.2a561d9f@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 60be76eeabb3d ("tracing: Add size check when printing trace_marker output")
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
If for some reason the trace_marker write does not have a nul byte for the
string, it will overflow the print:
trace_seq_printf(s, ": %s", field->buf);
The field->buf could be missing the nul byte. To prevent overflow, add the
max size that the buf can be by using the event size and the field
location.
int max = iter->ent_size - offsetof(struct print_entry, buf);
trace_seq_printf(s, ": %*.s", max, field->buf);
Link: https://lore.kernel.org/linux-trace-kernel/20231212084444.4619b8ce@gandalf.local.home
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
