| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit 91e74fa8b1bc ("kho: make sure preservations do not span multiple
NUMA nodes") made sure preservations from kho_preserve_pages() do not
span multiple NUMA nodes. If they do, the order is reduced and tried
again.
The same logic was not implemented for kho_unpreserve_pages(). This can
result in unpreserve calculating a different order than preserve, and
thus not actually unpreserving the pages.
Fix this by moving the order calculation logic to
__kho_preserve_pages_order() and use it from both preserve and
unpreserve paths.
Move __kho_unpreserve() down to avoid having a forward declaration. Its
users are further down in the file anyway. Also, it results in grouping
for all the page-level preservation and unpreservation functions. This
unfortunately makes the diff hard to read, but the main change in
__kho_unpreserve() is to call __kho_preserve_pages_order() instead of
open-coding the order calculation.
Fixes: 91e74fa8b1bc ("kho: make sure preservations do not span multiple NUMA nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Link: https://patch.msgid.link/20260519133332.2498092-1-pratyush@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux
Pull liveupdate fixes from Mike Rapoport:
"A few fixes for kexec handover and liveupdate:
- make sure KHO is skipped for crash kernel
- fix error reporting in memfd preservation if it fails mid-loop
- don't allow preserving memfds whose page count exceeds UINT_MAX
- fix documentation of memfd seals preservation to match the code"
* tag 'fixes-2026-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux:
mm/memfd_luo: document preservation of file seals
mm/memfd_luo: reject memfds whose page count exceeds UINT_MAX
mm/memfd_luo: report error when restoring a folio fails mid-loop
kho: skip KHO for crash kernel
|
|
kho_fill_kimage() unconditionally populates the kimage with KHO
metadata for every kexec image type. When the image is a crash kernel,
this can be problematic as the crash kernel can run in a small reserved
region and the KHO scratch areas can sit outside it.
The crash kernel then faults during kho_memory_init() when it
tries phys_to_virt() on the KHO FDT address:
Unable to handle kernel paging request at virtual address xxxxxxxx
...
fdt_offset_ptr+...
fdt_check_node_offset_+...
fdt_first_property_offset+...
fdt_get_property_namelen_+...
fdt_getprop+...
kho_memory_init+...
mm_core_init+...
start_kernel+...
kho_locate_mem_hole() already skips KHO logic for KEXEC_TYPE_CRASH
images, but kho_fill_kimage() was missing the same guard. As
kho_fill_kimage() is the single point that populates image->kho.fdt
and image->kho.scratch, fixing it here is sufficient for both arm64
and x86 as the FDT and boot_params path are bailing out when these
fields are unset.
Fixes: d7255959b69a ("kho: allow kexec load before KHO finalization")
Signed-off-by: Evangelos Petrongonas <epetron@amazon.de>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Link: https://patch.msgid.link/20260410011609.1103-1-epetron@amazon.de
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
Fix two error handling issues in kho_add_subtree(), where it doesn't
handle the error path correctly.
1. If fdt_setprop() fails after the subnode has been created, the
subnode is not removed. This leaves an incomplete node in the FDT
(missing "preserved-data" or "blob-size" properties).
2. The fdt_setprop() return value (an FDT error code) is stored
directly in err and returned to the caller, which expects -errno.
Fix both by storing fdt_setprop() results in fdt_err, jumping to a new
out_del_node label that removes the subnode on failure, and only setting
err = 0 on the success path, otherwise returning -ENOMEM (instead of
FDT_ERR_ errors that would come from fdt_setprop).
No user-visible changes. This patch fixes error handling in the KHO
(Kexec HandOver) subsystem, which is used to preserve data across kexec
reboots. The fix only affects a rare failure path during kexec
preparation — specifically when the kernel runs out of space in the
Flattened Device Tree buffer while registering preserved memory regions.
In the unlikely event that this error path was triggered, the old code
would leave a malformed node in the device tree and return an incorrect
error code to the calling subsystem, which could lead to confusing log
messages or incorrect recovery decisions. With this fix, the incomplete
node is properly cleaned up and the appropriate errno value is propagated,
this error code is not returned to the user.
Link: https://lore.kernel.org/20260410-kho_fix_send-v2-1-1b4debf7ee08@debian.org
Fixes: 3dc92c311498 ("kexec: add Kexec HandOver (KHO) generation helpers")
Signed-off-by: Breno Leitao <leitao@debian.org>
Suggested-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When session allocation fails during deserialization, the global 'err'
variable was not updated before returning. This caused subsequent calls
to luo_session_deserialize() to incorrectly report success.
Ensure 'err' is set to the error code from PTR_ERR(session). This ensures
that an error is correctly returned to userspace when it attempts to open
/dev/liveupdate in the new kernel if deserialization failed.
Link: https://lore.kernel.org/20260415193738.515491-1-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Cc: David Matlack <dmatlack@google.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Samiullah Khawaja <skhawaja@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "Eliminate Dying Memory Cgroup" (Qi Zheng and Muchun Song)
Address the longstanding "dying memcg problem". A situation wherein a
no-longer-used memory control group will hang around for an extended
period pointlessly consuming memory
- "fix unexpected type conversions and potential overflows" (Qi Zheng)
Fix a couple of potential 32-bit/64-bit issues which were identified
during review of the "Eliminate Dying Memory Cgroup" series
- "kho: history: track previous kernel version and kexec boot count"
(Breno Leitao)
Use Kexec Handover (KHO) to pass the previous kernel's version string
and the number of kexec reboots since the last cold boot to the next
kernel, and print it at boot time
- "liveupdate: prevent double preservation" (Pasha Tatashin)
Teach LUO to avoid managing the same file across different active
sessions
- "liveupdate: Fix module unloading and unregister API" (Pasha
Tatashin)
Address an issue with how LUO handles module reference counting and
unregistration during module unloading
- "zswap pool per-CPU acomp_ctx simplifications" (Kanchana Sridhar)
Simplify and clean up the zswap crypto compression handling and
improve the lifecycle management of zswap pool's per-CPU acomp_ctx
resources
- "mm/damon/core: fix damon_call()/damos_walk() vs kdmond exit race"
(SeongJae Park)
Address unlikely but possible leaks and deadlocks in damon_call() and
damon_walk()
- "mm/damon/core: validate damos_quota_goal->nid" (SeongJae Park)
Fix a couple of root-only wild pointer dereferences
- "Docs/admin-guide/mm/damon: warn commit_inputs vs other params race"
(SeongJae Park)
Update the DAMON documentation to warn operators about potential
races which can occur if the commit_inputs parameter is altered at
the wrong time
- "Minor hmm_test fixes and cleanups" (Alistair Popple)
Bugfixes and a cleanup for the HMM kernel selftests
- "Modify memfd_luo code" (Chenghao Duan)
Cleanups, simplifications and speedups to the memfd_lou code
- "mm, kvm: allow uffd support in guest_memfd" (Mike Rapoport)
Support for userfaultfd in guest_memfd
- "selftests/mm: skip several tests when thp is not available" (Chunyu
Hu)
Fix several issues in the selftests code which were causing breakage
when the tests were run on CONFIG_THP=n kernels
- "mm/mprotect: micro-optimization work" (Pedro Falcato)
A couple of nice speedups for mprotect()
- "MAINTAINERS: update KHO and LIVE UPDATE entries" (Pratyush Yadav)
Document upcoming changes in the maintenance of KHO, LUO, memfd_luo,
kexec, crash, kdump and probably other kexec-based things - they are
being moved out of mm.git and into a new git tree
* tag 'mm-stable-2026-04-18-02-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (121 commits)
MAINTAINERS: add page cache reviewer
mm/vmscan: avoid false-positive -Wuninitialized warning
MAINTAINERS: update Dave's kdump reviewer email address
MAINTAINERS: drop include/linux/liveupdate from LIVE UPDATE
MAINTAINERS: drop include/linux/kho/abi/ from KHO
MAINTAINERS: update KHO and LIVE UPDATE maintainers
MAINTAINERS: update kexec/kdump maintainers entries
mm/migrate_device: remove dead migration entry check in migrate_vma_collect_huge_pmd()
selftests: mm: skip charge_reserved_hugetlb without killall
userfaultfd: allow registration of ranges below mmap_min_addr
mm/vmstat: fix vmstat_shepherd double-scheduling vmstat_update
mm/hugetlb: fix early boot crash on parameters without '=' separator
zram: reject unrecognized type= values in recompress_store()
docs: proc: document ProtectionKey in smaps
mm/mprotect: special-case small folios when applying permissions
mm/mprotect: move softleaf code out of the main function
mm: remove '!root_reclaim' checking in should_abort_scan()
mm/sparse: fix comment for section map alignment
mm/page_io: use sio->len for PSWPIN accounting in sio_read_complete()
selftests/mm: transhuge_stress: skip the test when thp not available
...
|
|
Stop pinning modules indefinitely upon file handler registration.
Instead, dynamically increment the module reference count only when a live
update session actively uses the file handler (e.g., during preservation
or deserialization), and release it when the session ends.
This allows modules providing live update handlers to be gracefully
unloaded when no live update is in progress.
Link: https://lore.kernel.org/20260327033335.696621-11-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Cc: David Matlack <dmatlack@google.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Samiullah Khawaja <skhawaja@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Change liveupdate_unregister_file_handler and liveupdate_unregister_flb to
return void instead of an error code. This follows the design principle
that unregistration during module unload should not fail, as the unload
cannot be stopped at that point.
Link: https://lore.kernel.org/20260327033335.696621-10-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Cc: David Matlack <dmatlack@google.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Samiullah Khawaja <skhawaja@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now that file handler unregistration automatically unregisters all
associated file handlers (FLBs), the liveupdate_test_unregister() function
is no longer needed. Remove it along with its usages and declarations.
Link: https://lore.kernel.org/20260327033335.696621-9-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Cc: David Matlack <dmatlack@google.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Samiullah Khawaja <skhawaja@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
To ensure that unregistration is always successful and doesn't leave
dangling resources, introduce auto-unregistration of FLBs: when a file
handler is unregistered, all FLBs associated with it are automatically
unregistered.
Introduce a new helper luo_flb_unregister_all() which unregisters all FLBs
linked to the given file handler.
Link: https://lore.kernel.org/20260327033335.696621-8-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Cc: David Matlack <dmatlack@google.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Samiullah Khawaja <skhawaja@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now that FLB module references are handled dynamically during active
sessions, we can safely remove the luo_session_quiesce() and
luo_session_resume() mechanism.
Link: https://lore.kernel.org/20260327033335.696621-7-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Cc: David Matlack <dmatlack@google.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Samiullah Khawaja <skhawaja@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Stop pinning modules indefinitely upon FLB registration. Instead,
dynamically take a module reference when the FLB is actively used in a
session (e.g., during preserve and retrieve) and release it when the
session concludes.
This allows modules providing FLB operations to be cleanly unloaded when
not in active use by the live update orchestrator.
Link: https://lore.kernel.org/20260327033335.696621-6-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Cc: David Matlack <dmatlack@google.com>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Because liveupdate FLB objects will soon drop their persistent module
references when registered, list traversals must be protected against
concurrent module unloading.
To provide this protection, utilize the global luo_register_rwlock. It
protects the global registry of FLBs and the handler's specific list of
FLB dependencies.
Read locks are used during concurrent list traversals (e.g., during
preservation and serialization). Write locks are taken during
registration and unregistration.
Link: https://lore.kernel.org/20260327033335.696621-5-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Cc: David Matlack <dmatlack@google.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Samiullah Khawaja <skhawaja@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Because liveupdate file handlers will no longer hold a module reference
when registered, we must ensure that the access to the handler list is
protected against concurrent module unloading.
Utilize the global luo_register_rwlock to protect the global registry of
file handlers. Read locks are taken during list traversals in
luo_preserve_file() and luo_file_deserialize(). Write locks are taken
during registration and unregistration.
Link: https://lore.kernel.org/20260327033335.696621-4-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Cc: David Matlack <dmatlack@google.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Samiullah Khawaja <skhawaja@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The luo_flb_get_private() function, which is responsible for lazily
initializing the private state of FLB objects, can be called concurrently
from multiple threads. This creates a data race on the 'initialized' flag
and can lead to multiple executions of mutex_init() and INIT_LIST_HEAD()
on the same memory.
Introduce a static spinlock (luo_flb_init_lock) local to the function to
synchronize the initialization path. Use smp_load_acquire() and
smp_store_release() for memory ordering between the fast path and the slow
path.
Link: https://lore.kernel.org/20260327033335.696621-3-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: David Matlack <dmatlack@google.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Samiullah Khawaja <skhawaja@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "liveupdate: Fix module unloading and unregister API", v3.
This patch series addresses an issue with how LUO handles module reference
counting and unregistration during a module unload (e.g., via rmmod).
Currently, modules that register live update file handlers are pinned for
the entire duration they are registered. This prevents the modules from
being unloaded gracefully, even when no live update session is in
progress.
Furthermore, if a module is forcefully unloaded, the unregistration
functions return an error (e.g. -EBUSY) if a session is active, which is
ignored by the kernel's module unload path, leaving dangling pointers in
the LUO global lists.
To resolve these issues, this series introduces the following changes:
1. Adds a global read-write semaphore (luo_register_rwlock) to protect
the registration lists for both file handlers and FLBs.
2. Reduces the scope of module reference counting for file handlers and
FLBs. Instead of pinning modules indefinitely upon registration,
references are now taken only when they are actively used in a live
update session (e.g., during preservation, retrieval, or
deserialization).
3. Removes the global luo_session_quiesce() mechanism since module
unload behavior now handles active sessions implicitly.
4. Introduces auto-unregistration of FLBs during file handler
unregistration to prevent leaving dangling resources.
5. Changes the unregistration functions to return void instead of
an error code.
6. Fixes a data race in luo_flb_get_private() by introducing a spinlock
for thread-safe lazy initialization.
7. Strengthens security by using %.*s when printing untrusted deserialized
compatible strings and session names to prevent out-of-bounds reads.
This patch (of 10):
Deserialized strings from KHO data (such as file handler compatible
strings and session names) are provided by the previous kernel and might
not be null-terminated if the data is corrupted or maliciously crafted.
When printing these strings in error messages, use the %.*s format
specifier with the maximum buffer size to prevent out-of-bounds reads into
adjacent kernel memory.
Link: https://lore.kernel.org/20260327033335.696621-1-pasha.tatashin@soleen.com
Link: https://lore.kernel.org/20260327033335.696621-2-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Cc: David Matlack <dmatlack@google.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Samiullah Khawaja <skhawaja@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "liveupdate: prevent double preservation", v4.
Currently, LUO does not prevent the same file from being managed twice
across different active sessions.
Because LUO preserves files of absolutely different types: memfd, and
upcoming vfiofd [1], iommufd [2], guestmefd (and possible kvmfd/cpufd).
There is no common private data or guarantee on how to prevent that the
same file is not preserved twice beside using inode or some slower and
expensive method like hashtables.
This patch (of 4)
Currently, LUO does not prevent the same file from being managed twice
across different active sessions.
Use a global xarray luo_preserved_files to keep track of file identifiers
being preserved by LUO. Update luo_preserve_file() to check and insert
the file identifier into this xarray when it is preserved, and erase it in
luo_file_unpreserve_files() when it is released.
To allow handlers to define what constitutes a "unique" file (e.g.,
different struct file objects pointing to the same hardware resource), add
a get_id() callback to struct liveupdate_file_ops. If not provided, the
default identifier is the struct file pointer itself.
This ensures that the same file (or resource) cannot be managed by
multiple sessions. If another session attempts to preserve an already
managed file, it will now fail with -EBUSY.
Link: https://lore.kernel.org/20260326163943.574070-1-pasha.tatashin@soleen.com
Link: https://lore.kernel.org/20260326163943.574070-2-pasha.tatashin@soleen.com
Link: https://lore.kernel.org/all/20260129212510.967611-1-dmatlack@google.com [1]
Link: https://lore.kernel.org/all/20260203220948.2176157-1-skhawaja@google.com [2]
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: David Matlack <dmatlack@google.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use Kexec Handover (KHO) to pass the previous kernel's version string and
the number of kexec reboots since the last cold boot to the next kernel,
and print it at boot time.
Example output:
[ 0.000000] KHO: exec from: 6.19.0-rc4-next-20260107 (count 1)
Motivation
==========
Bugs that only reproduce when kexecing from specific kernel versions are
difficult to diagnose. These issues occur when a buggy kernel kexecs into
a new kernel, with the bug manifesting only in the second kernel.
Recent examples include the following commits:
* commit eb2266312507 ("x86/boot: Fix page table access in
5-level to 4-level paging transition")
* commit 77d48d39e991 ("efistub/tpm: Use ACPI reclaim memory
for event log to avoid corruption")
* commit 64b45dd46e15 ("x86/efi: skip memattr table on kexec
boot")
As kexec-based reboots become more common, these version-dependent bugs
are appearing more frequently. At scale, correlating crashes to the
previous kernel version is challenging, especially when issues only occur
in specific transition scenarios.
Implementation
==============
The kexec metadata is stored as a plain C struct (struct
kho_kexec_metadata) rather than FDT format, for simplicity and direct
field access. It is registered via kho_add_subtree() as a separate
subtree, keeping it independent from the core KHO ABI. This design
choice:
- Keeps the core KHO ABI minimal and stable
- Allows the metadata format to evolve independently
- Avoids requiring version bumps for all KHO consumers (LUO, etc.)
when the metadata format changes
The struct kho_kexec_metadata contains two fields:
- previous_release: The kernel version that initiated the kexec
- kexec_count: Number of kexec boots since last cold boot
On cold boot, kexec_count starts at 0 and increments with each kexec. The
count helps identify issues that only manifest after multiple consecutive
kexec reboots.
[leitao@debian.org: call kho_kexec_metadata_init() for both boot paths]
Link: https://lore.kernel.org/all/20260309-kho-v8-5-c3abcf4ac750@debian.org/ [1]
Link: https://lore.kernel.org/20260409-kho_fix_merge_issue-v1-1-710c84ceaa85@debian.org
Link: https://lore.kernel.org/20260316-kho-v9-5-ed6dcd951988@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
kho_in_debugfs_init() calls fdt_totalsize() to determine blob sizes, which
assumes all blobs are FDTs. This breaks for non-FDT blobs like struct
kho_kexec_metadata.
Fix this by reading the "blob-size" property from the FDT (persisted by
kho_add_subtree()) instead of calling fdt_totalsize(). Also rename local
variables from fdt_phys/sub_fdt to blob_phys/blob for consistency with the
non-FDT-specific naming.
Link: https://lore.kernel.org/20260316-kho-v9-4-ed6dcd951988@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
kho_add_subtree() accepts a size parameter but only forwards it to
debugfs. The size is not persisted in the KHO FDT, so it is lost across
kexec. This makes it impossible for the incoming kernel to determine the
blob size without understanding the blob format.
Store the blob size as a "blob-size" property in the KHO FDT alongside the
"preserved-data" physical address. This allows the receiving kernel to
recover the size for any blob regardless of format.
Also extend kho_retrieve_subtree() with an optional size output parameter
so callers can learn the blob size without needing to understand the blob
format. Update all callers to pass NULL for the new parameter.
Link: https://lore.kernel.org/20260316-kho-v9-3-ed6dcd951988@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since kho_add_subtree() now accepts arbitrary data blobs (not just FDTs),
rename the parameter from 'fdt' to 'blob' to better reflect its purpose.
Apply the same rename to kho_remove_subtree() for consistency.
Also rename kho_debugfs_fdt_add() and kho_debugfs_fdt_remove() to
kho_debugfs_blob_add() and kho_debugfs_blob_remove() respectively, with
the same parameter rename from 'fdt' to 'blob'.
Link: https://lore.kernel.org/20260316-kho-v9-2-ed6dcd951988@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "kho: history: track previous kernel version and kexec boot
count", v9.
Use Kexec Handover (KHO) to pass the previous kernel's version string and
the number of kexec reboots since the last cold boot to the next kernel,
and print it at boot time.
Example
=======
[ 0.000000] Linux version 6.19.0-rc3-upstream-00047-ge5d992347849
...
[ 0.000000] KHO: exec from: 6.19.0-rc4-next-20260107upstream-00004-g3071b0dc4498 (count 1)
Motivation
==========
Bugs that only reproduce when kexecing from specific kernel versions are
difficult to diagnose. These issues occur when a buggy kernel kexecs into
a new kernel, with the bug manifesting only in the second kernel.
Recent examples include:
* eb2266312507 ("x86/boot: Fix page table access in 5-level to 4-level paging transition")
* 77d48d39e991 ("efistub/tpm: Use ACPI reclaim memory for event log to avoid corruption")
* 64b45dd46e15 ("x86/efi: skip memattr table on kexec boot")
As kexec-based reboots become more common, these version-dependent bugs
are appearing more frequently. At scale, correlating crashes to the
previous kernel version is challenging, especially when issues only occur
in specific transition scenarios.
Some bugs manifest only after multiple consecutive kexec reboots.
Tracking the kexec count helps identify these cases (this metric is
already used by live update sub-system).
KHO provides a reliable mechanism to pass information between kernels. By
carrying the previous kernel's release string and kexec count forward, we
can print this context at boot time to aid debugging.
The goal of this feature is to have this information being printed in
early boot, so, users can trace back kernel releases in kexec. Systemd is
not helpful because we cannot assume that the previous kernel has systemd
or even write access to the disk (common when using Linux as bootloaders)
This patch (of 6):
kho_add_subtree() assumes the fdt argument is always an FDT and calls
fdt_totalsize() on it in the debugfs code path. This assumption will
break if a caller passes arbitrary data instead of an FDT.
When CONFIG_KEXEC_HANDOVER_DEBUGFS is enabled, kho_debugfs_fdt_add() calls
__kho_debugfs_fdt_add(), which executes:
f->wrapper.size = fdt_totalsize(fdt);
Fix this by adding an explicit size parameter to kho_add_subtree() so
callers specify the blob size. This allows subtrees to contain arbitrary
data formats, not just FDTs. Update all callers:
- memblock.c: use fdt_totalsize(fdt)
- luo_core.c: use fdt_totalsize(fdt_out)
- test_kho.c: use fdt_totalsize()
- kexec_handover.c (root fdt): use fdt_totalsize(kho_out.fdt)
Also update __kho_debugfs_fdt_add() to receive the size explicitly instead
of computing it internally via fdt_totalsize(). In kho_in_debugfs_init(),
pass fdt_totalsize() for the root FDT and sub-blobs since all current
users are FDTs. A subsequent patch will persist the size in the KHO FDT
so the incoming side can handle non-FDT blobs correctly.
Link: https://lore.kernel.org/20260323110747.193569-1-duanchenghao@kylinos.cn
Link: https://lore.kernel.org/20260316-kho-v9-1-ed6dcd951988@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Suggested-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "maple_tree: Replace big node with maple copy" (Liam Howlett)
Mainly prepararatory work for ongoing development but it does reduce
stack usage and is an improvement.
- "mm, swap: swap table phase III: remove swap_map" (Kairui Song)
Offers memory savings by removing the static swap_map. It also yields
some CPU savings and implements several cleanups.
- "mm: memfd_luo: preserve file seals" (Pratyush Yadav)
File seal preservation to LUO's memfd code
- "mm: zswap: add per-memcg stat for incompressible pages" (Jiayuan
Chen)
Additional userspace stats reportng to zswap
- "arch, mm: consolidate empty_zero_page" (Mike Rapoport)
Some cleanups for our handling of ZERO_PAGE() and zero_pfn
- "mm/kmemleak: Improve scan_should_stop() implementation" (Zhongqiu
Han)
A robustness improvement and some cleanups in the kmemleak code
- "Improve khugepaged scan logic" (Vernon Yang)
Improve khugepaged scan logic and reduce CPU consumption by
prioritizing scanning tasks that access memory frequently
- "Make KHO Stateless" (Jason Miu)
Simplify Kexec Handover by transitioning KHO from an xarray-based
metadata tracking system with serialization to a radix tree data
structure that can be passed directly to the next kernel
- "mm: vmscan: add PID and cgroup ID to vmscan tracepoints" (Thomas
Ballasi and Steven Rostedt)
Enhance vmscan's tracepointing
- "mm: arch/shstk: Common shadow stack mapping helper and
VM_NOHUGEPAGE" (Catalin Marinas)
Cleanup for the shadow stack code: remove per-arch code in favour of
a generic implementation
- "Fix KASAN support for KHO restored vmalloc regions" (Pasha Tatashin)
Fix a WARN() which can be emitted the KHO restores a vmalloc area
- "mm: Remove stray references to pagevec" (Tal Zussman)
Several cleanups, mainly udpating references to "struct pagevec",
which became folio_batch three years ago
- "mm: Eliminate fake head pages from vmemmap optimization" (Kiryl
Shutsemau)
Simplify the HugeTLB vmemmap optimization (HVO) by changing how tail
pages encode their relationship to the head page
- "mm/damon/core: improve DAMOS quota efficiency for core layer
filters" (SeongJae Park)
Improve two problematic behaviors of DAMOS that makes it less
efficient when core layer filters are used
- "mm/damon: strictly respect min_nr_regions" (SeongJae Park)
Improve DAMON usability by extending the treatment of the
min_nr_regions user-settable parameter
- "mm/page_alloc: pcp locking cleanup" (Vlastimil Babka)
The proper fix for a previously hotfixed SMP=n issue. Code
simplifications and cleanups ensued
- "mm: cleanups around unmapping / zapping" (David Hildenbrand)
A bunch of cleanups around unmapping and zapping. Mostly
simplifications, code movements, documentation and renaming of
zapping functions
- "support batched checking of the young flag for MGLRU" (Baolin Wang)
Batched checking of the young flag for MGLRU. It's part cleanups; one
benchmark shows large performance benefits for arm64
- "memcg: obj stock and slab stat caching cleanups" (Johannes Weiner)
memcg cleanup and robustness improvements
- "Allow order zero pages in page reporting" (Yuvraj Sakshith)
Enhance free page reporting - it is presently and undesirably order-0
pages when reporting free memory.
- "mm: vma flag tweaks" (Lorenzo Stoakes)
Cleanup work following from the recent conversion of the VMA flags to
a bitmap
- "mm/damon: add optional debugging-purpose sanity checks" (SeongJae
Park)
Add some more developer-facing debug checks into DAMON core
- "mm/damon: test and document power-of-2 min_region_sz requirement"
(SeongJae Park)
An additional DAMON kunit test and makes some adjustments to the
addr_unit parameter handling
- "mm/damon/core: make passed_sample_intervals comparisons
overflow-safe" (SeongJae Park)
Fix a hard-to-hit time overflow issue in DAMON core
- "mm/damon: improve/fixup/update ratio calculation, test and
documentation" (SeongJae Park)
A batch of misc/minor improvements and fixups for DAMON
- "mm: move vma_(kernel|mmu)_pagesize() out of hugetlb.c" (David
Hildenbrand)
Fix a possible issue with dax-device when CONFIG_HUGETLB=n. Some code
movement was required.
- "zram: recompression cleanups and tweaks" (Sergey Senozhatsky)
A somewhat random mix of fixups, recompression cleanups and
improvements in the zram code
- "mm/damon: support multiple goal-based quota tuning algorithms"
(SeongJae Park)
Extend DAMOS quotas goal auto-tuning to support multiple tuning
algorithms that users can select
- "mm: thp: reduce unnecessary start_stop_khugepaged()" (Breno Leitao)
Fix the khugpaged sysfs handling so we no longer spam the logs with
reams of junk when starting/stopping khugepaged
- "mm: improve map count checks" (Lorenzo Stoakes)
Provide some cleanups and slight fixes in the mremap, mmap and vma
code
- "mm/damon: support addr_unit on default monitoring targets for
modules" (SeongJae Park)
Extend the use of DAMON core's addr_unit tunable
- "mm: khugepaged cleanups and mTHP prerequisites" (Nico Pache)
Cleanups to khugepaged and is a base for Nico's planned khugepaged
mTHP support
- "mm: memory hot(un)plug and SPARSEMEM cleanups" (David Hildenbrand)
Code movement and cleanups in the memhotplug and sparsemem code
- "mm: remove CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE and cleanup
CONFIG_MIGRATION" (David Hildenbrand)
Rationalize some memhotplug Kconfig support
- "change young flag check functions to return bool" (Baolin Wang)
Cleanups to change all young flag check functions to return bool
- "mm/damon/sysfs: fix memory leak and NULL dereference issues" (Josh
Law and SeongJae Park)
Fix a few potential DAMON bugs
- "mm/vma: convert vm_flags_t to vma_flags_t in vma code" (Lorenzo
Stoakes)
Convert a lot of the existing use of the legacy vm_flags_t data type
to the new vma_flags_t type which replaces it. Mainly in the vma
code.
- "mm: expand mmap_prepare functionality and usage" (Lorenzo Stoakes)
Expand the mmap_prepare functionality, which is intended to replace
the deprecated f_op->mmap hook which has been the source of bugs and
security issues for some time. Cleanups, documentation, extension of
mmap_prepare into filesystem drivers
- "mm/huge_memory: refactor zap_huge_pmd()" (Lorenzo Stoakes)
Simplify and clean up zap_huge_pmd(). Additional cleanups around
vm_normal_folio_pmd() and the softleaf functionality are performed.
* tag 'mm-stable-2026-04-13-21-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm: fix deferred split queue races during migration
mm/khugepaged: fix issue with tracking lock
mm/huge_memory: add and use has_deposited_pgtable()
mm/huge_memory: add and use normal_or_softleaf_folio_pmd()
mm: add softleaf_is_valid_pmd_entry(), pmd_to_softleaf_folio()
mm/huge_memory: separate out the folio part of zap_huge_pmd()
mm/huge_memory: use mm instead of tlb->mm
mm/huge_memory: remove unnecessary sanity checks
mm/huge_memory: deduplicate zap deposited table call
mm/huge_memory: remove unnecessary VM_BUG_ON_PAGE()
mm/huge_memory: add a common exit path to zap_huge_pmd()
mm/huge_memory: handle buggy PMD entry in zap_huge_pmd()
mm/huge_memory: have zap_huge_pmd return a boolean, add kdoc
mm/huge: avoid big else branch in zap_huge_pmd()
mm/huge_memory: simplify vma_is_specal_huge()
mm: on remap assert that input range within the proposed VMA
mm: add mmap_action_map_kernel_pages[_full]()
uio: replace deprecated mmap hook with mmap_prepare in uio_info
drivers: hv: vmbus: replace deprecated mmap hook with mmap_prepare
mm: allow handling of stacked mmap_prepare hooks in more drivers
...
|
|
luo_session_deserialize() ignored the return value from
luo_file_deserialize(). As a result, a session could be left partially
restored even though the /dev/liveupdate open path treats deserialization
failures as fatal.
Propagate the error so a failed file deserialization aborts session
deserialization instead of silently continuing.
Link: https://lkml.kernel.org/r/20260325044608.8407-1-leotimmins1974@gmail.com
Link: https://lkml.kernel.org/r/20260325044608.8407-2-leotimmins1974@gmail.com
Fixes: 16cec0d26521 ("liveupdate: luo_session: add ioctls for file preservation")
Signed-off-by: Leo Timmins <leotimmins1974@gmail.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
KHO currently restricts the maximum order of a restored page to the
maximum order supported by the buddy allocator. While this works fine for
much of the data passed across kexec, it is possible to have pages larger
than MAX_PAGE_ORDER.
For one, it is possible to get a larger order when using
kho_preserve_pages() if the number of pages is large enough, since it
tries to combine multiple aligned 0-order preservations into one higher
order preservation.
For another, upcoming support for hugepages can have gigantic hugepages
being preserved over KHO.
There is no real reason for this limit. The KHO preservation machinery
can handle any page order. Remove this artificial restriction on max page
order.
Link: https://lkml.kernel.org/r/20260309123410.382308-2-pratyush@kernel.org
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Samiullah Khawaja <skhawaja@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The KHO restoration machinery is not capable of dealing with preservations
that span multiple NUMA nodes. kho_preserve_folio() guarantees the
preservation will only span one NUMA node since folios can't span multiple
nodes.
This leaves kho_preserve_pages(). While semantically kho_preserve_pages()
only deals with 0-order pages, so all preservations should be single page
only, in practice it combines preservations to higher orders for
efficiency. This can result in a preservation spanning multiple nodes.
Break up the preservations into a smaller order if that happens.
Link: https://lkml.kernel.org/r/20260309123410.382308-1-pratyush@kernel.org
Signed-off-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Suggested-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Restored vmalloc regions are currently not properly marked for KASAN,
causing KASAN to treat accesses to these regions as out-of-bounds.
Fix this by properly unpoisoning the restored vmalloc area using
kasan_unpoison_vmalloc(). This requires setting the VM_UNINITIALIZED flag
during the initial area allocation and clearing it after the pages have
been mapped and unpoisoned, using the clear_vm_uninitialized_flag()
helper.
Link: https://lkml.kernel.org/r/20260225223857.1714801-3-pasha.tatashin@soleen.com
Fixes: a667300bd53f ("kho: add support for preserving vmalloc allocations")
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reported-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Tested-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Eliminate the `kho_finalize()` function and its associated state from the
KHO subsystem. The transition to a radix tree for memory tracking makes
the explicit "finalize" state and its serialization step obsolete.
Remove the `kho_finalize()` and `kho_finalized()` APIs and their stub
implementations. Update KHO client code and the debugfs interface to no
longer call or depend on the `kho_finalize()` mechanism.
Complete the move towards a stateless KHO, simplifying the overall design
by removing unnecessary state management.
Link: https://lkml.kernel.org/r/20260206021428.3386442-3-jasonmiu@google.com
Signed-off-by: Jason Miu <jasonmiu@google.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Changyuan Lyu <changyuanl@google.com>
Cc: David Matlack <dmatlack@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Make KHO Stateless", v9.
This series transitions KHO from an xarray-based metadata tracking system
with serialization to a radix tree data structure that can be passed
directly to the next kernel.
The key motivations for this change are to:
- Eliminate the need for data serialization before kexec.
- Remove the KHO finalize state.
- Pass preservation metadata more directly to the next kernel via the FDT.
The new approach uses a radix tree to mark preserved pages. A page's
physical address and its order are encoded into a single value. The tree
is composed of multiple levels of page-sized tables, with leaf nodes being
bitmaps where each set bit represents a preserved page. The physical
address of the radix tree's root is passed in the FDT, allowing the next
kernel to reconstruct the preserved memory map.
This series is broken down into the following patches:
1. kho: Adopt radix tree for preserved memory tracking:
Replaces the xarray-based tracker with the new radix tree
implementation and increments the ABI version.
2. kho: Remove finalize state and clients:
Removes the now-obsolete kho_ |
