| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 7.2
* New features:
- None. Zilch. Nada. Que dalle.
* Fixes and other improvements:
- Significant cleanup of the vgic-v5 PPI support which was merged in
7.1. This makes the code more maintainable, and squashes a couple
of bugs in the meantime.
- Set of fixes for the handling of the MMU in an NV context,
particularly VNCR-triggered faults. S1POE support is fixed
as well.
- Large set of pKVM fixes, mostly addressing recurring issues
around hypervisor tracking of donated pages in obscure cases
where the donation could fail and leave things in a bizarre
state.
- Fixes for the so-called "lazy vgic init", which resulted in
sleeping operations in non-preemptible sections. This turned
out to be far more invasive than initially expected...
- Reduce the overhead of L1/L2 context switch by not touching
the FP registers.
- Fix the way non-implemented page sizes are dealt with when
a guest insist on using them for S2 translation.
- The usual set of low-impact fixes and cleanups all over the map.
|
|
KVM SEV changes for 7.2
- Don't advertise support for unusuable VM types, and account for VM types
that are disabled by firmware, e.g. to mitigate security vulnerabilities.
- Rewrite the SEV {en,de}crypt debug ioctls as they were riddle with bugs and
unnecessarily complicated, and add comprehensive tests.
- Clean up and deduplicate the SEV page pinning code.
- Fix minor goofs related to writing back CPUID information after firmware
rejects a CPUID page for an SNP vCPU.
|
|
* kvm-arm64/vgic-v5-PPI-fixes:
: .
: Substantial cleanup of the vgic-v5 PPI support. From the original
: cover letter:
:
: "With the GICv5 PPi support merged in, it has become obvious that a few
: things could be improved, both from the correctness and maintainability
: angles."
: .
KVM: arm64: Fix arch timer interrupts for GICv3-on-GICv5 guests
irqchip/gic-v5: Immediately exec priority drop following activate
Documentation: KVM: Clarify that PMU_V3_IRQ IntID requirements for GICv5
Documentation: KVM: Fix typos in VGICv5 documentation
KVM: arm64: selftests: Improve error handling for GICv5 PPI selftest
KVM: arm64: selftests: Cleanup unused vars in GICv5 PPI selftest
KVM: arm64: selftests: Add missing GIC CDEN to no-vgic-v5 selftest
KVM: arm64: vgic-v5: Atomically assign bits to PPI DVI bitmap
KVM: arm64: vgic-v5: Add missing trap handing for NV triage
KVM: arm64: vgic-v5: Limit support to 64 PPIs
KVM: arm64: vgic: Rationalise per-CPU irq accessor
KVM: arm64: vgic-v5: Drop defensive checks from vgic_v5_ppi_queue_irq_unlock()
KVM: arm64: vgic: Consolidate vgic_allocate_private_irqs_locked()
KVM: arm64: vgic: Constify struct irq_ops usage
KVM: arm64: vgic-v5: Drop pointless ARM64_HAS_GICV5_CPUIF check
KVM: arm64: vgic-v5: Remove use of __assign_bit() with a constant
KVM: arm64: vgic-v5: Move PPI caps into kvm_vgic_global_state
KVM: arm64: vgic-v5: Add for_each_visible_v5_ppi() iterator
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/no-lazy-vgic-init:
: .
: Fix an ugly situation where the vgic lazy init could happen in
: non-preemtible contexts such as vcpu reset, resulting in lockdep
: splats.
:
: This requires revamping the way in-kernel emulation of devices
: (timers, PMU) are presenting their interrupt to the vgic, and
: make sure there is no need to init the vgic on the back of that.
: .
KVM: arm64: vgic-v2: Don't init the vgic on in-kernel interrupt injection
KVM: arm64: vgic-v2: Force vgic init on injection outside the run loop
KVM: arm64: pmu: Kill the PMU interrupt level cache
KVM: arm64: timer: Kill the per-timer irq level cache
KVM: arm64: Simplify userspace notification of interrupt state
KVM: arm64: timer: Repaint kvm_timer_{should,irq_can}_fire() to kvm_timer_{pending,enabled}()
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
KVM generic changes for 7.2
- Rename invalidate_begin() to invalidate_start() throughout KVM to follow
the kernel's nomenclature, e.g. for mmu_notifiers.
- Minor cleanups.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull runtime verifier fixes from Steven Rostedt:
- Fix reset ordering on per-task destruction
Reset the task before dropping the slot instead of after, which was
causing out-of-bound memory accesses.
- Fix HA monitor synchronization and cleanup
Ensure synchronous cleanup for HA monitors by running timer callbacks
in RCU read-side critical sections and using synchronize_rcu() during
destruction.
- Avoid armed timers after tasks exit
Add automatic cleanup for per-task HA monitors to prevent timers from
firing after task exit.
- Fix memory ordering for DA/HA monitors
Fix race conditions during monitor start by using release-acquire
semantics for the monitoring flag.
- Fix initialization for DA/HA monitors
Ensure monitors are not initialized relying on potentially corrupted
state like the monitoring flag, that is not reset by all monitors
type and may have an unknown state in monitors reusing the storage
(per-task).
- Fix memory safety in per-task and per-object monitors
Prevent use-after-free and out-of-bounds access by synchronizing with
in-flight tracepoint probes using tracepoint_synchronize_unregister()
before freeing monitor storage or releasing task slots.
- Adjust monitors for preemptible tracepoints
Fix monitors that relied on tracepoints disabling preemption.
Explicitly disable task migration when per-CPU monitors handle events
to avoid accessing the wrong state and update the opid monitor logic.
- Fix incorrect __user specifier usage
Remove __user from a non-pointer variable in the extract_params()
helper.
- Fix bugs in the rv tool
Ensure strings are NUL-terminated, fix substring matching in monitor
searches, and improve cleanup and exit status handling.
- Fix several bugs in rvgen
Fix LTL literal stringification, subparsers' options handling, and
suffix stripping in dot2k.
* tag 'trace-rv-v7.1-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
verification/rvgen: Fix ltl2k writing True as a literal
verification/rvgen: Fix options shared among commands
verification/rvgen: Fix suffix strip in dot2k
tools/rv: Fix cleanup after failed trace setup
tools/rv: Fix substring match when listing container monitors
tools/rv: Fix substring match bug in monitor name search
tools/rv: Ensure monitor name and desc are NUL-terminated
rv: Use 0 to check preemption enabled in opid
rv: Prevent task migration while handling per-CPU events
rv: Ensure synchronous cleanup for HA monitors
rv: Add automatic cleanup handlers for per-task HA monitors
rv: Do not rely on clean monitor when initialising HA
rv: Fix monitor start ordering and memory ordering for monitoring flag
rv: Ensure all pending probes terminate on per-obj monitor destroy
rv: Prevent in-flight per-task handlers from using invalid slots
rv: Reset per-task DA monitors before releasing the slot
rv: Fix __user specifier usage in extract_params()
|
|
Pull rdma fixes from Jason Gunthorpe:
"Several significant bug fixes of pre-existing issues:
- Missing validation on ucap fd types passed from userspace
- Missing validation of HW DMA space vs userpace expected sizes in
EFA queue setup
- DMA corruption when using DMA block sizes >= 4G when setting up MRs
in all drivers
- Missing validation of CPU IDs when setting up dma handles
- Missing validation of IB_MR_REREG_ACCESS when changing writability
of a MR
- Missing validation of received message/packet size in ISER and SRP"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/srp: bound SRP_RSP sense copy by the received length
IB/isert: Reject login PDUs shorter than ISER_HEADERS_LEN
RDMA: During rereg_mr ensure that REREG_ACCESS is compatible
RDMA/core: Validate cpu_id against nr_cpu_ids in DMAH alloc
RDMA/umem: Fix truncation for block sizes >= 4G
RDMA/efa: Validate SQ ring size against max LLQ size
RDMA/core: Validate the passed in fops for ib_get_ucaps()
|
|
If IB_MR_REREG_ACCESS changes from RO to RW then the umem has to be
re-evaluated to ensure it is properly pinned as RW. Since the umem is
hidden inside each driver's mr struct add a ib_umem_check_rereg() function
that each driver has to call before processing IB_MR_REREG_ACCESS.
mlx4 has to retain its duplicate ib_access_writable check because it
implements IB_MR_REREG_ACCESS | IB_MR_REREG_TRANS by changing both items
in place sequentially while the MR is live, so it will continue to not
support this combination.
Cc: stable@vger.kernel.org
Fixes: b40656aa7d55 ("RDMA/umem: remove FOLL_FORCE usage")
Link: https://patch.msgid.link/r/0-v1-06fb1a2d6cf5+107-rereg_access_jgg@nvidia.com
Reported-by: Philip Tsukerman <philiptsukerman@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- MSHV driver fixes from various people (Anirudh Rayabharam, Can Peng,
Dexuan Cui, Michael Kelley, Jork Loeser, Wei Liu)
- Hyper-V user space tools fixes (Thorsten Blum)
- Allow VMBus to be unloaded after frame buffer is flushed (Michael
Kelley)
* tag 'hyperv-fixes-signed-20260607' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
mshv: support 1G hugepages by passing them as 2M-aligned chunks
Drivers: hv: vmbus: Improve the logic of reserving fb_mmio on Gen2 VMs
mshv: use kmalloc_array in mshv_root_scheduler_init
mshv: Add conditional VMBus dependency
hyperv: Clean up and fix the guest ID comment in hvgdk.h
drm/hyperv: During panic do VMBus unload after frame buffer is flushed
Drivers: hv: vmbus: Provide option to skip VMBus unload on panic
mshv: unmap debugfs stats pages on kexec
mshv: clean up SynIC state on kexec for L1VH
mshv: limit SynIC management to MSHV-owned resources
hv: utils: replace deprecated strcpy with strscpy in kvp_register
hv: utils: handle and propagate errors in kvp_register
mshv: add a missing padding field
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull rseq fix from Ingo Molnar:
- Fix uninitialized stack variable in rseq_exit_user_update() (Qing
Wang)
* tag 'sched-urgent-2026-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Fix using an uninitialized stack variable in rseq_exit_user_update()
|
|
After commit 0652a3daa787 ("tracing: Fix CFI violation in probestub
being called by tprobes"), there are many build errors when building
ARCH=arm multi_v7_defconfig + CONFIG_CFI=y like:
In file included from drivers/base/devres.c:17:
In file included from drivers/base/trace.h:16:
In file included from include/linux/tracepoint.h:23:
include/linux/cfi.h:44:6: error: call to undeclared function 'get_kernel_nofault'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
44 | if (get_kernel_nofault(hash, func - cfi_get_offset()))
| ^
1 error generated.
get_kernel_nofault() is called in the generic version of
cfi_get_func_hash() but nothing ensures uaccess.h is always included for
a proper expansion and prototype. Include uaccess.h in cfi.h to clear
up the errors.
Cc: stable@vger.kernel.org
Fixes: 0652a3daa787 ("tracing: Fix CFI violation in probestub being called by tprobes")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter, wireless and Bluetooth.
Current release - fix to a fix:
- Bluetooth: MGMT: fix backward compatibility with bluetoothd
which adds stray bytes to MGMT_OP_ADD_EXT_ADV_DATA
Previous releases - regressions:
- af_unix: fix inq_len update inaccuracy on partial read
- eth: fec: fix pinctrl default state restore order on resume
- wifi: iwlwifi:
- mvm: don't support the reset handshake for old firmwares
- pcie: simplify the resume flow if fast resume is not used,
work around NIC access failures
Previous releases - always broken:
- Bluetooth: L2CAP: reject BR/EDR signaling packets over MTUsig
- sctp: fix a couple of bugs in COOKIE_ECHO processing
- sched: fix pedit partial COW leading to page cache corruption
- wifi: nl80211: reject oversized EMA RNR lists
- netfilter:
- conntrack_irc: fix possible out-of-bounds read
- bridge: make ebt_snat ARP rewrite writable
- appletalk: zero-initialize aarp_entry to prevent heap info leak
- ipv4: restrict IPOPT_SSRR and IPOPT_LSRR options
- mptcp: fix number of bugs reported by AI scans and discovered
during NVMe over MPTCP testing"
* tag 'net-7.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
Reapply "bnxt_en: bring back rtnl_lock() in the bnxt_open() path"
udp: clear skb->dev before running a sockmap verdict
sctp: purge outqueue on stale COOKIE-ECHO handling
bonding: annotate data-races arcound churn variables
net/802/mrp: fix vector attribute parsing in mrp_pdu_parse_vecattr
rtase: Avoid sleeping in get_stats64()
ieee802154: 6lowpan: only accept IPv6 packets in lowpan_xmit()
ipv6: mcast: Fix use-after-free when processing MLD queries
selftests: net: add vxlan vnifilter notification test
vxlan: vnifilter: fix spurious notification on VNI update
vxlan: vnifilter: send notification on VNI add
rtase: Reset TX subqueue when clearing TX ring
octeontx2-af: npc: Fix CPT channel mask in npc_install_flow
dt-bindings: ethernet: eswin: fix hsp-sp-csr backward compatibility
sctp: validate cached peer INIT chunk length in COOKIE_ECHO processing
net/sched: fix pedit partial COW leading to page cache corruption
vsock/vmci: fix sk_ack_backlog leak on failed handshake
net: bonding: fix NULL pointer dereference in bond_do_ioctl()
geneve: fix length used in GRO hint UDP checksum adjustment
net: ethernet: mtk_eth_soc: Fix use-after-free in metadata dst teardown
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
- Fix CFI violation in probestub function
The probestub is a function to allow tprobes to hook to a tracepoint
to gain access to its parameters.
The function itself is only referenced by the tracepoint structure
which lives in the __tracepoint section. objtool explicitly ignores
that section and when processing functions in the kernel, if it
detects one that has no references it will seal it to have its ENDBR
stripped on boot up.
This means the probstub function will have its ENDBR stripped and if
a tprobe is attached to it with IBT enabled, it will go *boom*.
* tag 'trace-v7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix CFI violation in probestub being called by tprobes
|
|
tcf_pedit_act() computes the COW range for skb_ensure_writable()
once before the key loop using tcfp_off_max_hint, but the hint does
not account for the runtime header offset added by typed keys. This
can leave part of the write region un-COW'd.
Fix by moving skb_ensure_writable() inside the per-key loop where
the actual write offset is known, and add overflow checking on the
offset arithmetic. For negative offsets (e.g. Ethernet header edits
at ingress), use skb_cow() to COW the headroom instead. Guard
offset_valid() against INT_MIN, where negation is undefined.
Fixes: 8b796475fd78 ("net/sched: act_pedit: really ensure the skb is writable")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Reported-by: Keenan Dong <keenanat2000@gmail.com>
Reported-by: Han Guidong <2045gemini@gmail.com>
Reported-by: Zhang Cen <rollkingzzc@gmail.com>
Reviewed-by: Han Guidong <2045gemini@gmail.com>
Tested-by: Han Guidong <2045gemini@gmail.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Tested-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Rajat Gupta <rajat.gupta@oss.qualcomm.com>
Link: https://patch.msgid.link/20260531123221.48732-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The probestub is a function to allow tprobes to hook to a tracepoint to
gain access to its parameters. The function itself is only referenced by
the tracepoint structure which lives in the __tracepoint section. objtool
explicitly ignores that section and when processing functions in the
kernel, if it detects one that has no references it will seal it to have
its ENDBR stripped on boot up.
This means when a tprobe is attached to the sched_wakeup tracepoint, when it
is triggered it will call __probestub_sched_wakeup and due to the missing
ENDBR on a CFI-enabled machine it will take a #CP exception.
Fix this by adding CFI_NOSEAL annotation to probestub declaration.
Cc: stable@vger.kernel.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://patch.msgid.link/20260603153147.573589-1-eva.kurchatova@virtuozzo.com
Fixes: d5173f753750 ("objtool: Exclude __tracepoints data from ENDBR checks")
Signed-off-by: Eva Kurchatova <eva.kurchatova@virtuozzo.com>
[ Updated change log ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_core: fix memory leak in error path of hci_alloc_dev()
- hci_sync: reject oversized Broadcast Announcement prepend
- MGMT: Fix backward compatibility with userspace
- MGMT: validate advertising TLV before type checks
- L2CAP: reject BR/EDR signaling packets over MTUsig
- RFCOMM: validate skb length in MCC handlers
- RFCOMM: hold listener socket in rfcomm_connect_ind()
- ISO: Fix not releasing hdev reference on iso_conn_big_sync
- ISO: Fix a use-after-free of the hci_conn pointer
- ISO: Fix data-race on iso_pi fields in hci_get_route calls
- SCO: Fix data-race on sco_pi fields in sco_connect
- BNEP: reject short frames before parsing
* tag 'for-net-2026-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: MGMT: Fix backward compatibility with userspace
Bluetooth: SCO: Fix data-race on sco_pi fields in sco_connect
Bluetooth: ISO: Fix data-race on iso_pi fields in hci_get_route calls
Bluetooth: ISO: Fix a use-after-free of the hci_conn pointer
Bluetooth: ISO: Fix not releasing hdev reference on iso_conn_big_sync
Bluetooth: fix memory leak in error path of hci_alloc_dev()
Bluetooth: bnep: reject short frames before parsing
Bluetooth: hci_sync: reject oversized Broadcast Announcement prepend
Bluetooth: L2CAP: reject BR/EDR signaling packets over MTUsig
Bluetooth: RFCOMM: validate skb length in MCC handlers
Bluetooth: MGMT: validate advertising TLV before type checks
Bluetooth: RFCOMM: hold listener socket in rfcomm_connect_ind()
====================
Link: https://patch.msgid.link/20260603162714.342496-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported the following uninit splat:
BUG: KMSAN: uninit-value in mptcp_write_data_fin net/mptcp/options.c:542 [inline]
BUG: KMSAN: uninit-value in mptcp_established_options_dss net/mptcp/options.c:590 [inline]
BUG: KMSAN: uninit-value in mptcp_established_options+0x112f/0x3530 net/mptcp/options.c:874
mptcp_write_data_fin net/mptcp/options.c:542 [inline]
mptcp_established_options_dss net/mptcp/options.c:590 [inline]
mptcp_established_options+0x112f/0x3530 net/mptcp/options.c:874
tcp_established_options+0x312/0xcc0 net/ipv4/tcp_output.c:1192
__tcp_transmit_skb+0x5dc/0x5fe0 net/ipv4/tcp_output.c:1575
__tcp_send_ack+0x967/0xad0 net/ipv4/tcp_output.c:4499
tcp_send_ack+0x3d/0x60 net/ipv4/tcp_output.c:4505
mptcp_subflow_shutdown+0x164/0x690 net/mptcp/protocol.c:3137
mptcp_check_send_data_fin+0x31b/0x3d0 net/mptcp/protocol.c:3218
__mptcp_wr_shutdown net/mptcp/protocol.c:3234 [inline]
__mptcp_close+0x860/0x1360 net/mptcp/protocol.c:3313
mptcp_close+0x42/0x260 net/mptcp/protocol.c:3367
inet_release+0x1ee/0x2a0 net/ipv4/af_inet.c:442
__sock_release net/socket.c:722 [inline]
sock_close+0xd6/0x2f0 net/socket.c:1514
__fput+0x60e/0x1010 fs/file_table.c:510
____fput+0x25/0x30 fs/file_table.c:538
task_work_run+0x208/0x2b0 kernel/task_work.c:233
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
__exit_to_user_mode_loop kernel/entry/common.c:67 [inline]
exit_to_user_mode_loop+0x306/0x1b60 kernel/entry/common.c:98
__exit_to_user_mode_prepare include/linux/irq-entry-common.h:207 [inline]
syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:238 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:318 [inline]
__do_fast_syscall_32+0x2c7/0x460 arch/x86/entry/syscall_32.c:310
do_fast_syscall_32+0x37/0x80 arch/x86/entry/syscall_32.c:332
do_SYSENTER_32+0x1f/0x30 arch/x86/entry/syscall_32.c:370
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
Local variable opts created at:
__tcp_transmit_skb+0x4d/0x5fe0 net/ipv4/tcp_output.c:1536
__tcp_send_ack+0x967/0xad0 net/ipv4/tcp_output.c:4499
The output path currently omits initializing the mptcp extension
`use_map` flag in a few corner cases.
Address the issue always zeroing all the extensions flags before
eventually initializing the individual bits. To that extent, introduce
and use a struct_group to avoid multiple bitwise operations.
Fixes: cfcceb7a39fc ("tcp: shrink per-packet memset in __tcp_transmit_skb()")
Cc: stable@vger.kernel.org
Reported-by: syzbot+ff020673c5e3d94d9478@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ff020673c5e3d94d9478
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260602-net-mptcp-misc-fixes-7-1-rc7-v2-10-856831229976@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
net/bluetooth/l2cap_core.c:l2cap_sig_channel() accepts BR/EDR
signaling packets up to the channel MTU and dispatches each command
without enforcing the signaling MTU (MTUsig). A Bluetooth BR/EDR peer
within radio range can send a fixed-channel CID 0x0001 packet that is
larger than MTUsig and contains many L2CAP_ECHO_REQ commands before
pairing. In a real-radio stock-kernel run, one 681-byte signaling
packet containing 168 zero-length ECHO_REQ commands made the target
transmit 168 ECHO_RSP frames over about 220 ms.
Impact: a Bluetooth BR/EDR peer within radio range, before pairing, can
force 168 ECHO_RSP frames from one 681-byte fixed-channel signaling
packet containing packed ECHO_REQ commands.
Define Linux's BR/EDR signaling MTU as the spec minimum of 48 bytes and
reject any larger signaling packet with one L2CAP_COMMAND_REJECT_RSP
carrying L2CAP_REJ_MTU_EXCEEDED before any command is dispatched.
The Bluetooth Core spec wording for MTUExceeded says the reject
identifier shall match the first request command in the packet, and
that packets containing only responses shall be silently discarded.
Linux intentionally deviates from that prescription: silently
discarding desynchronizes the peer because the remote stack never
learns its responses were dropped, and locating the first request
command requires walking command headers past MTUsig, i.e. processing
bytes from a packet we have already decided is too large to process.
We therefore always emit one reject and use the identifier from the
first command header, a single fixed-offset byte read.
The unrestricted BR/EDR signaling parser and ECHO_REQ response path both
trace to the initial git import; no later introducing commit is
available for a Fixes tag.
Cc: stable@vger.kernel.org
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Link: https://lore.kernel.org/r/20260518002800.1361430-1-michael.bommarito@gmail.com
Link: https://lore.kernel.org/r/20260520135034.1060859-1-michael.bommarito@gmail.com
Link: https://lore.kernel.org/r/20260521000555.3712030-1-michael.bommarito@gmail.com
Assisted-by: Claude:claude-opus-4-7
Assisted-by: Codex:gpt-5-5-xhigh
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Tracepoint handlers are fully preemptible after a46023d5616 ("tracing:
Guard __DECLARE_TRACE() use of __DO_TRACE_CALL() with SRCU-fast"). When
a per-CPU monitor handles an event, it retrieves the monitor state using
a per-CPU pointer. If the event itself doesn't disable preemption, the
task can migrate to a different CPU and we risk updating the wrong
monitor.
Mitigate this by explicitly disabling task migration before acquiring
the monitor pointer. This cannot guarantee the monitor runs on the
correct CPU but reduces the race condition window and prevents warnings.
Reviewed-by: Wen Yang <wen.yang@linux.dev>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260601153840.124372-10-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
HA monitors may start timers, all cleanup functions currently stop the
timers asynchronously to avoid sleeping in the wrong context.
Nothing makes sure running callbacks terminate on cleanup.
Run the entire HA timer callback in an RCU read-side critical section,
this way we can simply synchronize_rcu() with any pending timer and are
sure any cleanup using kfree_rcu() runs after callbacks terminated.
Additionally make sure any unlikely callback running late won't run any
code if the monitor is marked as disabled or if destruction started.
Use memory barriers to serialise with racing resets.
Fixes: f5587d1b6ec9 ("rv: Add Hybrid Automata monitor type")
Fixes: 4a24127bd6cb ("rv: Add support for per-object monitors in DA/HA")
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260601153840.124372-9-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Hybrid automata monitors may start timers, depending on the model, these
may remain active on an exiting task and cause false positives or even
access freed memory.
Add an enable/disable hook in the HA code, currently only populated by
the per-task handler for registration and deregistration.
This hooks to the sched_process_exit event and ensures the timer is
stopped for every exiting task. The handler is enabled automatically but
may be disabled, for instance if the monitor uses the event for another
purpose (but should still manually ensure timers are stopped).
Fixes: f5587d1b6ec9 ("rv: Add Hybrid Automata monitor type")
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260601153840.124372-8-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Hybrid Automata monitors hook into the DA implementation when doing
da_monitor_reset(). This function is called both on initialisation and
teardown, HA monitors try to cancel a timer only when it's initialised
relying on the da_mon->monitoring flag. This flag could however be
corrupted during initialisation. This happens for instance on per-task
monitors that share the same storage with different type of monitors
like LTL or in case of races during a previous teardown.
Stop relying on the monitoring flag during initialisation, assume that
can have any value, so use a separate da_reset_state() skiping timer
cancellation.
New monitors (e.g. new tasks) are always zero-initialised so it is safe
to rely on the monitoring flag for those.
Reported-by: Wen Yang <wen.yang@linux.dev>
Closes: https://lore.kernel.org/lkml/d02c656aada7d071f083460a5c9a454363669b61.1778522945.git.wen.yang@linux.dev
Suggested-by: Nam Cao <namcao@linutronix.de>
Fixes: f5587d1b6ec9 ("rv: Add Hybrid Automata monitor type")
Reviewed-by: Wen Yang <wen.yang@linux.dev>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260601153840.124372-7-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
da_monitor_start() set monitoring=1 before calling da_monitor_init_hook(),
may racing with the sched_switch handler:
da_monitor_start() sched_switch handler
------------------------- ---------------------------------
da_mon->monitoring = 1;
if (da_monitoring(da_mon)) /* true */
ha_start_timer_ns(...);
/* hrtimer->base == NULL, crash */
da_monitor_init_hook(da_mon);
/* hrtimer_setup() sets base */
Fix the ordering and pair with release/acquire semantics:
da_monitor_init_hook(da_mon);
smp_store_release(&da_mon->monitoring, 1); /* da_monitor_start() */
return smp_load_acquire(&da_mon->monitoring); /* da_monitoring() */
On ARM64 a plain STR + LDR does not form a release-acquire pair, so
the load can observe monitoring=1 while hrtimer->base is still NULL.
The plain accesses are also data races under KCSAN.
Use WRITE_ONCE for the monitoring=0 store in da_monitor_reset() to
cover the reset path.
Fixes: 792575348ff7 ("rv/include: Add deterministic automata monitor definition via C macros")
Signed-off-by: Wen Yang <wen.yang@linux.dev>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260601153840.124372-6-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
The monitor disable/destroy sequence detaches all probes and resets the
monitor's data, however it doesn't wait for pending probes. This is an
issue with per-object monitors, which free the monitor storage.
Call tracepoint_synchronize_unregister() to make sure to wait for all
pending probes before destroying the monitor storage.
Fixes: 4a24127bd6cb ("rv: Add support for per-object monitors in DA/HA")
Reviewed-by: Wen Yang <wen.yang@linux.dev>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260601153840.124372-5-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Per-task monitors use a slot in the task_struct->rv[] array and store
that locally (e.g. task_mon_slot), this slot is returned during the
destruction process but currently hanlers can be running while that slot
is returning and this race may lead to accessing an invalid slot.
Synchronise with all in-flight tracepoint handlers using
tracepoint_synchronize_unregister() before returning the slot.
Fixes: f5587d1b6ec9 ("rv: Add Hybrid Automata monitor type")
Fixes: a9769a5b9878 ("rv: Add support for LTL monitors")
Suggested-by: Wen Yang <wen.yang@linux.dev>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260601153840.124372-4-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Per-task monitors use task_mon_slot to determine which slot in the array
to use for the monitor. During destruction, this slot is returned but
this is done before resetting the monitor. As a result, the monitor's
reset is in fact resetting a slot that is outside of the array
(RV_PER_TASK_MONITOR_INIT).
Release the slot only after the reset to avoid out-of-bound memory
access.
Fixes: f5587d1b6ec93 ("rv: Add Hybrid Automata monitor type")
Cc: stable@vger.kernel.org
Suggested-by: Wen Yang <wen.yang@linux.dev>
Reviewed-by: Wen Yang <wen.yang@linux.dev>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260601153840.124372-3-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for net:
1) Fix splat with PREEMPT_RCU because smp_processor_id() in nfqueue,
from Fernando Fernandez Mancera.
2) Fix possible use of pointer to old IPVS scheduler after RCU grace
period when editing service, from Julian Anastasov.
3) Fix possible forever RCU walk over rt->fib6_siblings in nft_fib6,
if rt is unlinked mid-iteration, apparently same issue happens in
the fib6 core. From Jiayuan Chen.
4) Add mutex to guard refcount in synproxy infrastructure, since
concurrent hook {un}registration can happen.
From Fernando Fernandez Mancera.
5) Bail out if IRC conntrack helper fails to parse a command, do not
try parsing using other command handlers, from Florian Westphal.
This fixes a possible out-of-bound read.
6) Possible use-after-free in nft_tunnel by releasing template dst
after all references has been dropped, from Tristan Madani.
7) Ignore conntrack template in nft_ct, from Jiayuan Chen.
8) Missing skb_ensure_writable() in ebt_snat, Yiming Qian.
9) Remove multi-register byteorder support, this allows for kernel
stack info leak, from Florian Westphal.
* tag 'nf-26-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_byteorder: remove multi-register support
netfilter: bridge: make ebt_snat ARP rewrite writable
netfilter: nft_ct: bail out on template ct in get eval
netfilter: nft_tunnel: fix use-after-free on object destroy
netfilter: conntrack_irc: fix possible out-of-bounds read
netfilter: synproxy: add mutex to guard hook reference counting
netfilter: nft_fib_ipv6: bail out of sibling walk if rt got unlinked
ipvs: clear the svc scheduler ptr early on edit
netfilter: xt_NFQUEUE: prefer raw_smp_processor_id
====================
Link: https://patch.msgid.link/20260601115923.433946-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Following the previous set of fixes, this addresses another
significant number of small issues found in firmware drivers (tee,
optee, qcomtee, qcom ice, exynos acpm) drivers through various tools.
This is about error handling, resource leaks, concurrency and a
use-after-free bug.
The fixes for the Qualcomm ICE driver also introduce interface changes
in the UFS and MMC drivers using it.
Outside of firmware drivers, there are a few fixes across the tree:
- Minor driver code mistakes in the Atmel EBI memory controller, the
i.MX soc ID driver and socfpga boot logic
- A defconfig change to avoid a boot time regression on multiple
qualcomm boards
- Device tree fixes for qualcomm, at91 and gemini, addressing mostly
minor configuration mistakes"
* tag 'soc-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (28 commits)
firmware: samsung: acpm: Fix infinite loop on sequence number exhaustion
firmware: samsung: acpm: Fix missing LKMM barriers in sequence allocator
firmware: samsung: acpm: Fix false timeouts and Use-After-Free in polling
ARM: dts: gemini: Fix partition offsets
ARM: socfpga: Fix OF node refcount leak in SMP setup
soc: qcom: ice: Fix the error code when 'qcom,ice' property is not found
arm64: dts: qcom: eliza: Add power-domain and iface clk for ice node
arm64: dts: qcom: milos: Add power-domain and iface clk for ice node
tee: qcomtee: add missing va_end in early return qcomtee_object_user_init()
tee: fix params_from_user() error path in tee_ioctl_supp_recv
tee: shm: fix shm leak in register_shm_helper()
tee: fix tee_ioctl_object_invoke_arg padding
arm64: defconfig: Enable PCI M.2 power sequencing driver
scsi: ufs: ufs-qcom: Remove NULL check from devm_of_qcom_ice_get()
mmc: sdhci-msm: Remove NULL check from devm_of_qcom_ice_get()
soc: qcom: ice: Return proper error codes from devm_of_qcom_ice_get() instead of NULL
soc: qcom: ice: Return -ENODEV if the ICE platform device is not found
soc: qcom: ice: Fix race between qcom_ice_probe() and of_qcom_ice_get()
ARM: dts: microchip: sam9x7: fix GMAC clock configuration
firmware: samsung: acpm: Fix mailbox channel leak on probe error
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM fixes from Andrew Morton:
"13 hotfixes. All are for MM. 10 are cc:stable and the remaining 3
address post-7.1 issues or aren't considered suitable for backporting.
There's a three-patch series "userfaultfd: verify VMA state across
UFFDIO_COPY retry" from Mike Rapoport which fixes a few uffd things.
The rest are singletons - please see the individual changelogs for
details"
* tag 'mm-hotfixes-stable-2026-06-01-20-58' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
userfaultfd: remove redundant check in vm_uffd_ops()
userfaultfd: refuse to __mfill_atomic_pte() for unsupported VMAs
userfaultfd: verify VMA state across UFFDIO_COPY retry
mm/huge_memory: update file PMD counter before folio_put()
mm/huge_memory: update file PUD counter before folio_put()
mm/hugetlb_vmemmap: fix incorrect vmemmap restore in rollback
mm/damon/ops-common: call folio_test_lru() after folio_get()
mm/cma: fix reserved page leak on activation failure
mm/memory-failure: fix hugetlb_lock AA deadlock in get_huge_page_for_hwpoison
mm/hugetlb: restore reservation on error in hugetlb folio copy paths
mm/cma_debug: fix invalid accesses for inactive CMA areas
memcg: use round-robin victim selection in refill_stock
mm/hugetlb: avoid false positive lockdep assertion
|
|
There is an bug in which an uninitialized stack variable is used in
rseq_exit_user_update() as reported by syzbot:
BUG: KMSAN: kernel-infoleak in rseq_set_ids_get_csaddr include/linux/rseq_entry.h:502 [inline]
The local variable:
struct rseq_ids ids = {
.cpu_id = task_cpu(t),
.mm_cid = task_mm_cid(t),
.node_id = cpu_to_node(ids.cpu_id),
};
According to the C standard, the evaluation order of expressions in an
initializer list is indeterminately sequenced. The compiler (Clang, in
this KMSAN build) evaluates `cpu_to_node(ids.cpu_id)` *before*
`ids.cpu_id` is initialized with `task_cpu(t)`.
This is fixed by moving the assignment of ids.node_id outside the
structure initialization.
Fixes: 82f572449cfe ("rseq: Implement read only ABI enforcement for optimized RSEQ V2 mode")
Closes: https://syzkaller.appspot.com/bug?extid=185a631927096f9da2fc
Reported-by: syzbot+185a631927096f9da2fc@syzkaller.appspotmail.com
Signed-off-by: Qing Wang <wangqing7171@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://patch.msgid.link/20260602030854.574038-1-wangqing7171@gmail.com
|
|
When NEWTFILTER and DELFILTER are run concurrently it is possible to create a
race with an associated action.
Let's illustrate with CPU0 running NEWTFILTER and CPU1 running DELFILTER:
0: mutex_lock() <-- holds the idr lock
0: rcu_read_lock()
0: p = idr_find(idr, index) <-- action p is valid (RCU protects IDR)
0: mutex_unlock() <-- releases the idr lock
1: refcount_dec_and_mutex_lock() <-- refcnt 1->0, mutex held
1: idr_remove(idr, index) <-- Action removed from IDR
1: mutex_unlock() <-- mutex released allowing us to delete the action
1: tcf_action_cleanup(p); kfree(p) <-- Kfrees p immediately, no deferral
0: refcount_inc_not_zero(&p->tcfa_refcnt) <-- ouch, UAF p points to freed memory
This patch fixes the race condition between NEWTFILTER and DELFILTER by
adding struct rcu_head to tc_action used in the deferral and introducing a
call_rcu() in the delete path to defer the final kfree().
Note: this is a revert of commit d7fb60b9cafb ("net_sched: get rid of tcfa_rcu")
but also modernization/simplification to directly use kfree_rcu().
Let's illustrate the new restored code path:
0: rcu_read_lock()
1: refcount_dec_and_mutex_lock() <-- refcnt 1->0, mutex held
1: idr_remove(idr, index)
1: mutex_unlock()
1: call_rcu(&p->tcfa_rcu, tcf_action_rcu_free) <-- defer kfree after grace period
0: p = idr_find(idr, index)
0: refcount_inc_not_zero(&p->tcfa_refcnt) <-- fails, refcnt already 0
1: rcu_read_unlock() <-- release so freeing can run after grace period
After CPU1 calls idr_remove(), the object is no longer reachable through the IDR.
CPU0's subsequent idr_find() will return NULL, and even if it still held a
stale pointer, the immediate kfree() is now deferred until after the RCU grace
period, so no UAF can occur.
Fixes: d7fb60b9cafb ("net_sched: get rid of tcfa_rcu")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reported-by: Kyle Zeng <kylebot@openai.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: syzbot@syzkaller.appspotmail.com
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Tested-by: Kyle Zeng <kylebot@openai.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260531160812.68020-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ip_vs_edit_service() while unbinding the old scheduler clears
the svc->scheduler ptr after the scheduler module initiates
RCU callbacks. This can cause packets to use the old
scheduler at the time when svc->sched_data is already freed
after RCU grace period.
Fix it by clearing the ptr early in ip_vs_unbind_scheduler(),
before the done_service method schedules any RCU callbacks.
Also, if the new scheduler fails to initialize when replacing
the old scheduler, try to restore the old scheduler while still
returning the error code.
Link: https://sashiko.dev/#/patchset/20260519015506.634185-1-rosenp%40gmail.com
Fixes: 05f00505a89a ("ipvs: fix crash if scheduler is changed")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux
Pull liveupdate fixes from Mike Rapoport:
"Two kexec handover regression fixes:
- fix order calculation for kho_unpreserve_pages() to make sure sure
that the order calculation in kho_unpreserve_pages() mathes the
order calculation in kho_preserve_pages().
- fix math in calculation of KHO_TREE_MAX_DEPTH to make it work with
16KB pages"
* tag 'liveupdate-fixes-2026-05-30' of git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux:
kho: fix order calculation for kho_unpreserve_pages()
kho: fix KHO_TREE_MAX_DEPTH for non-4KB page sizes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small serial driver fixes for 7.1-rc6. Included in here
are:
- mips serial driver fixes to resolve some long-standing issues with
how they interacted with the console. That's the "majority" of the
changes in this merge request
- sh-sci driver regression fix
- 8250 driver regression fixes
- other small serial driver fixes for reported problems.
All of these have been in linux-next for over a week with no reported
issues"
* tag 'tty-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: dz: Enable modular build
serial: zs: Convert to use a platform device
serial: dz: Convert to use a platform device
serial: zs: Switch to using channel reset
serial: zs: Fix bootconsole handover lockup
serial: dz: Fix bootconsole handover lockup
serial: dz: Fix bootconsole message clobbering at chip reset
serial: 8250_dw: dispatch SysRq character in dw8250_handle_irq()
serial: 8250: dispatch SysRq character in serial8250_handle_irq()
serial: core: introduce guard(uart_port_lock_check_sysrq_irqsave)
tty: serial: samsung: Remove redundant port lock acquisition in rx helpers
serial: altera_jtaguart: handle uart_add_one_port() failures
serial: qcom_geni: fix kfifo underflow when flush precedes DMA completion IRQ
serial: fsl_lpuart: fix rx buffer and DMA map leaks in start_rx_dma
tty: add missing tty_driver include to tty_port.h
serial: qcom-geni: fix UART_RX_PAR_EN bit position
serial: sh-sci: fix memory region release in error path
tty: serial: pch_uart: add check for dma_alloc_coherent()
serial: zs: Fix swapped RI/DSR modem line transition counting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/mis |
