| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
After a couple of years and multiple LTS releases we received a report
that the behavior of O_DIRECTORY | O_CREAT changed starting with v5.7.
On kernels prior to v5.7 combinations of O_DIRECTORY, O_CREAT, O_EXCL
had the following semantics:
(1) open("/tmp/d", O_DIRECTORY | O_CREAT)
* d doesn't exist: create regular file
* d exists and is a regular file: ENOTDIR
* d exists and is a directory: EISDIR
(2) open("/tmp/d", O_DIRECTORY | O_CREAT | O_EXCL)
* d doesn't exist: create regular file
* d exists and is a regular file: EEXIST
* d exists and is a directory: EEXIST
(3) open("/tmp/d", O_DIRECTORY | O_EXCL)
* d doesn't exist: ENOENT
* d exists and is a regular file: ENOTDIR
* d exists and is a directory: open directory
On kernels since to v5.7 combinations of O_DIRECTORY, O_CREAT, O_EXCL
have the following semantics:
(1) open("/tmp/d", O_DIRECTORY | O_CREAT)
* d doesn't exist: ENOTDIR (create regular file)
* d exists and is a regular file: ENOTDIR
* d exists and is a directory: EISDIR
(2) open("/tmp/d", O_DIRECTORY | O_CREAT | O_EXCL)
* d doesn't exist: ENOTDIR (create regular file)
* d exists and is a regular file: EEXIST
* d exists and is a directory: EEXIST
(3) open("/tmp/d", O_DIRECTORY | O_EXCL)
* d doesn't exist: ENOENT
* d exists and is a regular file: ENOTDIR
* d exists and is a directory: open directory
This is a fairly substantial semantic change that userspace didn't
notice until Pedro took the time to deliberately figure out corner
cases. Since no one noticed this breakage we can somewhat safely assume
that O_DIRECTORY | O_CREAT combinations are likely unused.
The v5.7 breakage is especially weird because while ENOTDIR is returned
indicating failure a regular file is actually created. This doesn't make
a lot of sense.
Time was spent finding potential users of this combination. Searching on
codesearch.debian.net showed that codebases often express semantical
expectations about O_DIRECTORY | O_CREAT which are completely contrary
to what our code has done and currently does.
The expectation often is that this particular combination would create
and open a directory. This suggests users who tried to use that
combination would stumble upon the counterintuitive behavior no matter
if pre-v5.7 or post v5.7 and quickly realize neither semantics give them
what they want. For some examples see the code examples in [1] to [3]
and the discussion in [4].
There are various ways to address this issue. The lazy/simple option
would be to restore the pre-v5.7 behavior and to just live with that bug
forever. But since there's a real chance that the O_DIRECTORY | O_CREAT
quirk isn't relied upon we should try to get away with murder(ing bad
semantics) first. If we need to Frankenstein pre-v5.7 behavior later so
be it.
So let's simply return EINVAL categorically for O_DIRECTORY | O_CREAT
combinations. In addition to cleaning up the old bug this also opens up
the possiblity to make that flag combination do something more intuitive
in the future.
Starting with this commit the following semantics apply:
(1) open("/tmp/d", O_DIRECTORY | O_CREAT)
* d doesn't exist: EINVAL
* d exists and is a regular file: EINVAL
* d exists and is a directory: EINVAL
(2) open("/tmp/d", O_DIRECTORY | O_CREAT | O_EXCL)
* d doesn't exist: EINVAL
* d exists and is a regular file: EINVAL
* d exists and is a directory: EINVAL
(3) open("/tmp/d", O_DIRECTORY | O_EXCL)
* d doesn't exist: ENOENT
* d exists and is a regular file: ENOTDIR
* d exists and is a directory: open directory
One additional note, O_TMPFILE is implemented as:
#define __O_TMPFILE 020000000
#define O_TMPFILE (__O_TMPFILE | O_DIRECTORY)
#define O_TMPFILE_MASK (__O_TMPFILE | O_DIRECTORY | O_CREAT)
For older kernels it was important to return an explicit error when
O_TMPFILE wasn't supported. So O_TMPFILE requires that O_DIRECTORY is
raised alongside __O_TMPFILE. It also enforced that O_CREAT wasn't
specified. Since O_DIRECTORY | O_CREAT could be used to create a regular
allowing that combination together with __O_TMPFILE would've meant that
false positives were possible, i.e., that a regular file was created
instead of a O_TMPFILE. This could've been used to trick userspace into
thinking it operated on a O_TMPFILE when it wasn't.
Now that we block O_DIRECTORY | O_CREAT completely the check for O_CREAT
in the __O_TMPFILE branch via if ((flags & O_TMPFILE_MASK) != O_TMPFILE)
can be dropped. Instead we can simply check verify that O_DIRECTORY is
raised via if (!(flags & O_DIRECTORY)) and explain this in two comments.
As Aleksa pointed out O_PATH is unaffected by this change since it
always returned EINVAL if O_CREAT was specified - with or without
O_DIRECTORY.
Link: https://lore.kernel.org/lkml/20230320071442.172228-1-pedro.falcato@gmail.com
Link: https://sources.debian.org/src/flatpak/1.14.4-1/subprojects/libglnx/glnx-dirfd.c/?hl=324#L324 [1]
Link: https://sources.debian.org/src/flatpak-builder/1.2.3-1/subprojects/libglnx/glnx-shutil.c/?hl=251#L251 [2]
Link: https://sources.debian.org/src/ostree/2022.7-2/libglnx/glnx-dirfd.c/?hl=324#L324 [3]
Link: https://www.openwall.com/lists/oss-security/2014/11/26/14 [4]
Reported-by: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Left-shifting past the size of your datatype is undefined behaviour in C.
The literal 34 gets the type `int`, and that one is not big enough to be
left shifted by 26 bits.
An `unsigned` is long enough (on any machine that has at least 32 bits for
their ints.)
For uniformity, we mark all the literals as unsigned. But it's only
really needed for HUGETLB_FLAG_ENCODE_16GB.
Thanks to Randy Dunlap for an initial review and suggestion.
Link: https://lkml.kernel.org/r/20220905031904.150925-1-matthias.goergens@gmail.com
Signed-off-by: Matthias Goergens <matthias.goergens@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This idea was introduced by David Rientjes[1].
Introduce a new madvise mode, MADV_COLLAPSE, that allows users to request
a synchronous collapse of memory at their own expense.
The benefits of this approach are:
* CPU is charged to the process that wants to spend the cycles for the
THP
* Avoid unpredictable timing of khugepaged collapse
Semantics
This call is independent of the system-wide THP sysfs settings, but will
fail for memory marked VM_NOHUGEPAGE. If the ranges provided span
multiple VMAs, the semantics of the collapse over each VMA is independent
from the others. This implies a hugepage cannot cross a VMA boundary. If
collapse of a given hugepage-aligned/sized region fails, the operation may
continue to attempt collapsing the remainder of memory specified.
The memory ranges provided must be page-aligned, but are not required to
be hugepage-aligned. If the memory ranges are not hugepage-aligned, the
start/end of the range will be clamped to the first/last hugepage-aligned
address covered by said range. The memory ranges must span at least one
hugepage-sized region.
All non-resident pages covered by the range will first be
swapped/faulted-in, before being internally copied onto a freshly
allocated hugepage. Unmapped pages will have their data directly
initialized to 0 in the new hugepage. However, for every eligible
hugepage aligned/sized region to-be collapsed, at least one page must
currently be backed by memory (a PMD covering the address range must
already exist).
Allocation for the new hugepage may enter direct reclaim and/or
compaction, regardless of VMA flags. When the system has multiple NUMA
nodes, the hugepage will be allocated from the node providing the most
native pages. This operation operates on the current state of the
specified process and makes no persistent changes or guarantees on how
pages will be mapped, constructed, or faulted in the future
Return Value
If all hugepage-sized/aligned regions covered by the provided range were
either successfully collapsed, or were already PMD-mapped THPs, this
operation will be deemed successful. On success, process_madvise(2)
returns the number of bytes advised, and madvise(2) returns 0. Else, -1
is returned and errno is set to indicate the error for the most-recently
attempted hugepage collapse. Note that many failures might have occurred,
since the operation may continue to collapse in the event a single
hugepage-sized/aligned region fails.
ENOMEM Memory allocation failed or VMA not found
EBUSY Memcg charging failed
EAGAIN Required resource temporarily unavailable. Try again
might succeed.
EINVAL Other error: No PMD found, subpage doesn't have Present
bit set, "Special" page no backed by struct page, VMA
incorrectly sized, address not page-aligned, ...
Most notable here is ENOMEM and EBUSY (new to madvise) which are intended
to provide the caller with actionable feedback so they may take an
appropriate fallback measure.
Use Cases
An immediate user of this new functionality are malloc() implementations
that manage memory in hugepage-sized chunks, but sometimes subrelease
memory back to the system in native-sized chunks via MADV_DONTNEED;
zapping the pmd. Later, when the memory is hot, the implementation could
madvise(MADV_COLLAPSE) to re-back the memory by THPs to regain hugepage
coverage and dTLB performance. TCMalloc is such an implementation that
could benefit from this[2].
Only privately-mapped anon memory is supported for now, but additional
support for file, shmem, and HugeTLB high-granularity mappings[2] is
expected. File and tmpfs/shmem support would permit:
* Backing executable text by THPs. Current support provided by
CONFIG_READ_ONLY_THP_FOR_FS may take a long time on a large system which
might impair services from serving at their full rated load after
(re)starting. Tricks like mremap(2)'ing text onto anonymous memory to
immediately realize iTLB performance prevents page sharing and demand
paging, both of which increase steady state memory footprint. With
MADV_COLLAPSE, we get the best of both worlds: Peak upfront performance
and lower RAM footprints.
* Backing guest memory by hugapages after the memory contents have been
migrated in native-page-sized chunks to a new host, in a
userfaultfd-based live-migration stack.
[1] https://lore.kernel.org/linux-mm/d098c392-273a-36a4-1a29-59731cdf5d3d@google.com/
[2] https://github.com/google/tcmalloc/tree/master/tcmalloc
[jrdr.linux@gmail.com: avoid possible memory leak in failure path]
Link: https://lkml.kernel.org/r/20220713024109.62810-1-jrdr.linux@gmail.com
[zokeefe@google.com add missing kfree() to madvise_collapse()]
Link: https://lore.kernel.org/linux-mm/20220713024109.62810-1-jrdr.linux@gmail.com/
Link: https://lkml.kernel.org/r/20220713161851.1879439-1-zokeefe@google.com
[zokeefe@google.com: delay computation of hpage boundaries until use]]
Link: https://lkml.kernel.org/r/20220720140603.1958773-4-zokeefe@google.com
Link: https://lkml.kernel.org/r/20220706235936.2197195-10-zokeefe@google.com
Signed-off-by: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: "Souptick Joarder (HPE)" <jrdr.linux@gmail.com>
Suggested-by: David Rientjes <rientjes@google.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Chris Kennelly <ckennelly@google.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rongwei Wang <rongwei.wang@linux.alibaba.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.0-rc1.
It was delayed from last week as I wanted to make sure the last commit
here got some good testing in linux-next and elsewhere as it seemed to
show up only late in testing for some reason.
Nothing major here, just lots of cleanups from Jiri and Ilpo to make
the tty core cleaner (Jiri) and the rs485 code simpler to use (Ilpo).
Also included in here is the obligatory n_gsm updates from Daniel
Starke and lots of tiny driver updates and minor fixes and tweaks for
other smaller serial drivers.
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits)
tty: serial: qcom-geni-serial: Fix %lu -> %u in print statements
tty: amiserial: Fix comment typo
tty: serial: document uart_get_console()
tty: serial: serial_core, reformat kernel-doc for functions
Documentation: serial: link uart_ops properly
Documentation: serial: move GPIO kernel-doc to the functions
Documentation: serial: dedup kernel-doc for uart functions
Documentation: serial: move uart_ops documentation to the struct
dt-bindings: serial: snps-dw-apb-uart: Document Rockchip RV1126
serial: mvebu-uart: uart2 error bits clearing
tty: serial: fsl_lpuart: correct the count of break characters
serial: stm32: make info structs static to avoid sparse warnings
serial: fsl_lpuart: zero out parity bit in CS7 mode
tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
serial: 8250_bcm2835aux: Add missing clk_disable_unprepare()
tty: vt: initialize unicode screen buffer
serial: remove VR41XX serial driver
serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags
serial: 8250_dwlib: remove redundant sanity check for RS485 flags
dt_bindings: rs485: Correct delay values
...
|
|
Building perf for MIPS failed after 9f79b8b72339 ("uapi: simplify
__ARCH_FLOCK{,64}_PAD a little") with the following error:
CC
/home/fainelli/work/buildroot/output/bmips/build/linux-custom/tools/perf/trace/beauty/fcntl.o
In file included from
../../../../host/mipsel-buildroot-linux-gnu/sysroot/usr/include/asm/fcntl.h:77,
from ../include/uapi/linux/fcntl.h:5,
from trace/beauty/fcntl.c:10:
../include/uapi/asm-generic/fcntl.h:188:8: error: redefinition of
'struct flock'
struct flock {
^~~~~
In file included from ../include/uapi/linux/fcntl.h:5,
from trace/beauty/fcntl.c:10:
../../../../host/mipsel-buildroot-linux-gnu/sysroot/usr/include/asm/fcntl.h:63:8:
note: originally defined here
struct flock {
^~~~~
This is due to the local copy under
tools/include/uapi/asm-generic/fcntl.h including the toolchain's kernel
headers which already define 'struct flock' and define
HAVE_ARCH_STRUCT_FLOCK to future inclusions make a decision as to
whether re-defining 'struct flock' is appropriate or not.
Make sure what do not re-define 'struct flock'
when HAVE_ARCH_STRUCT_FLOCK is already defined.
Fixes: 9f79b8b72339 ("uapi: simplify __ARCH_FLOCK{,64}_PAD a little")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[arnd: sync with include/uapi/asm-generic/fcntl.h as well]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add support for RS-485 multipoint addressing using 9th bit [*]. The
addressing mode is configured through ->rs485_config().
ADDRB in termios indicates 9th bit addressing mode is enabled. In this
mode, 9th bit is used to indicate an address (byte) within the
communication line. ADDRB can only be enabled/disabled through
->rs485_config() that is also responsible for setting the destination and
receiver (filter) addresses.
Add traps to detect unwanted changes to struct serial_rs485 layout using
static_assert().
[*] Technically, RS485 is just an electronic spec and does not itself
specify the 9th bit addressing mode but 9th bit seems at least
"semi-standard" way to do addressing with RS485.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220624204210.11112-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial driver updates from Greg KH:
"Here is the big set of tty and serial driver updates for 5.19-rc1.
Lots of tiny cleanups in here, the major stuff is:
- termbit cleanups and unification by Ilpo. A much needed change that
goes a long way to making things simpler for all of the different
arches
- tty documentation cleanups and movements to their own place in the
documentation tree
- old tty driver cleanups and fixes from Jiri to bring some existing
drivers into the modern world
- RS485 cleanups and unifications to make it easier for individual
drivers to support this mode instead of having to duplicate logic
in each driver
- Lots of 8250 driver updates and additions
- new device id additions
- n_gsm continued fixes and cleanups
- other minor serial driver updates and cleanups
All of these have been in linux-next for weeks with no reported issues"
* tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (166 commits)
tty: Rework receive flow control char logic
pcmcia: synclink_cs: Don't allow CS5-6
serial: stm32-usart: Correct CSIZE, bits, and parity
serial: st-asc: Sanitize CSIZE and correct PARENB for CS7
serial: sifive: Sanitize CSIZE and c_iflag
serial: sh-sci: Don't allow CS5-6
serial: txx9: Don't allow CS5-6
serial: rda-uart: Don't allow CS5-6
serial: digicolor-usart: Don't allow CS5-6
serial: uartlite: Fix BRKINT clearing
serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE
serial: core: Do stop_rx in suspend path for console if console_suspend is disabled
tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate.
dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers
serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485
Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL"
serial: msm_serial: disable interrupts in __msm_console_write()
serial: meson: acquire port->lock in startup()
serial: 8250_dw: Use dev_err_probe()
serial: 8250_dw: Use devm_add_action_or_reset()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the Svpbmt extension, which allows memory attributes to
be encoded in pages
- Support for the Allwinner D1's implementation of page-based memory
attributes
- Support for running rv32 binaries on rv64 systems, via the compat
subsystem
- Support for kexec_file()
- Support for the new generic ticket-based spinlocks, which allows us
to also move to qrwlock. These should have already gone in through
the asm-geneic tree as well
- A handful of cleanups and fixes, include some larger ones around
atomics and XIP
* tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
RISC-V: Prepare dropping week attribute from arch_kexec_apply_relocations[_add]
riscv: compat: Using seperated vdso_maps for compat_vdso_info
RISC-V: Fix the XIP build
RISC-V: Split out the XIP fixups into their own file
RISC-V: ignore xipImage
RISC-V: Avoid empty create_*_mapping definitions
riscv: Don't output a bogus mmu-type on a no MMU kernel
riscv: atomic: Add custom conditional atomic operation implementation
riscv: atomic: Optimize dec_if_positive functions
riscv: atomic: Cleanup unnecessary definition
RISC-V: Load purgatory in kexec_file
RISC-V: Add purgatory
RISC-V: Support for kexec_file on panic
RISC-V: Add kexec_file support
RISC-V: use memcpy for kexec_file mode
kexec_file: Fix kexec_file.c build error for riscv platform
riscv: compat: Add COMPAT Kbuild skeletal support
riscv: compat: ptrace: Add compat_arch_ptrace implement
riscv: compat: signal: Add rt_frame implementation
riscv: add memory-type errata for T-Head
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding to
very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space to
remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections that
have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting. This
makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core from
Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection"
* tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits)
ptp: ocp: Add firmware header checks
ptp: ocp: fix PPS source selector debugfs reporting
ptp: ocp: add .init function for sma_op vector
ptp: ocp: vectorize the sma accessor functions
ptp: ocp: constify selectors
ptp: ocp: parameterize input/output sma selectors
ptp: ocp: revise firmware display
ptp: ocp: add Celestica timecard PCI ids
ptp: ocp: Remove #ifdefs around PCI IDs
ptp: ocp: 32-bit fixups for pci start address
Revert "net/smc: fix listen processing for SMC-Rv2"
ath6kl: Use cc-disable-warning to disable -Wdangling-pointer
selftests/bpf: Dynptr tests
bpf: Add dynptr data slices
bpf: Add bpf_dynptr_read and bpf_dynptr_write
bpf: Dynptr support for ring buffers
bpf: Add bpf_dynptr_from_mem for local dynptrs
bpf: Add verifier support for dynptrs
bpf: Suppress 'passing zero to PTR_ERR' warning
bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack
...
|
|
Nothing in termbits seems to require anything from linux/posix_types.h.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220509093446.6677-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
- Align c_cc defines.
- Remove extra newlines.
- Realign & adjust number of leading zeros.
- Reorder c_cflag defines to ascending order
- Make comment ending shorted (=remove period and one extra space from
the comments in mips).
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220509093446.6677-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some defines are the same across all archs. Move the most obvious
intersection to termbits-common.h.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220509093446.6677-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Many archs have termbits.h as octal numbers. It makes hard for humans
to parse the magnitude of large numbers correctly and to compare with
hex ones of the same define.
Convert octal values to hex.
First step is an automated conversion with:
for i in $(git ls-files | grep 'termbits\.h'); do
awk --non-decimal-data '/^#define\s+[A-Z][A-Z0-9]*\s+0[0-9]/ {
l=int(((length($3) - 1) * 3 + 3) / 4);
repl = sprintf("0x%0" l "x", $3);
print gensub(/[^[:blank:]]+/, repl, 3);
next} {print}' $i > $i~;
mv $i~ $i;
done
On top of that, some manual processing on alignment and number of zeros.
In addition, small tweaks to formatting of a few comments on the same
lines.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lore.kernel.org/r/2c8c96f-a12f-aadc-18ac-34c1d371929c@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Adding a new socket option, SO_RCVMARK, to indicate that SO_MARK
should be included in the ancillary data returned by recvmsg().
Renamed the sock_recv_ts_and_drops() function to sock_recv_cmsgs().
Signed-off-by: Erin MacNeil <lnx.erin@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20220427200259.2564-1-lnx.erin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make "uapi asm unistd.h" could be used for architectures' COMPAT
mode. The __SYSCALL_COMPAT is first used in riscv.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220405071314.3225832-8-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The F_GETLK64/F_SETLK64/F_SETLKW64 fcntl opcodes are only implemented
for the 32-bit syscall APIs, but are also needed for compat handling
on 64-bit kernels.
Consolidate them in unistd.h instead of definining the internal compat
definitions in compat.h, which is rather error prone (e.g. parisc
gets the values wrong currently).
Note that before this change they were never visible to userspace due
to the fact that CONFIG_64BIT is only set for kernel builds.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220405071314.3225832-3-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Don't bother to define the symbols empty, just don't use them.
That makes the intent a little more clear.
Remove the unused HAVE_ARCH_STRUCT_FLOCK64 define and merge the
32-bit mips struct flock into the generic one.
Add a new __ARCH_FLOCK_EXTRA_SYSID macro following the style of
__ARCH_FLOCK_PAD to avoid having a separate definition just for
one architecture.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220405071314.3225832-2-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
With SIGTRAP on perf events, we have encountered termination of
processes due to user space attempting to block delivery of SIGTRAP.
Consider this case:
<set up SIGTRAP on a perf event>
...
sigset_t s;
sigemptyset(&s);
sigaddset(&s, SIGTRAP | <and others>);
sigprocmask(SIG_BLOCK, &s, ...);
...
<perf event triggers>
When the perf event triggers, while SIGTRAP is blocked, force_sig_perf()
will force the signal, but revert back to the default handler, thus
terminating the task.
This makes sense for error conditions, but not so much for explicitly
requested monitoring. However, the expectation is still that signals
generated by perf events are synchronous, which will no longer be the
case if the signal is blocked and delivered later.
To give user space the ability to clearly distinguish synchronous from
asynchronous signals, introduce siginfo_t::si_perf_flags and
TRAP_PERF_FLAG_ASYNC (opted for flags in case more binary information is
required in future).
The resolution to the problem is then to (a) no longer force the signal
(avoiding the terminations), but (b) tell user space via si_perf_flags
if the signal was synchronous or not, so that such signals can be
handled differently (e.g. let user space decide to ignore or consider
the data imprecise).
The alternative of making the kernel ignore SIGTRAP on perf events if
the signal is blocked may work for some usecases, but likely causes
issues in others that then have to revert back to interception of
sigprocmask() (which we want to avoid). [ A concrete example: when using
breakpoint perf events to track data-flow, in a region of code where
signals are blocked, data-flow can no longer be tracked accurately.
When a relevant asynchronous signal is received after unblocking the
signal, the data-flow tracking logic needs to know its state is
imprecise. ]
Fixes: 97ba62b27867 ("perf: Add support for SIGTRAP on perf events")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/r/20220404111204.935357-1-elver@google.com
|
|
MADV_DONTNEED historically rejects mlocked ranges, but with MLOCK_ONFAULT
and MCL_ONFAULT allowing to mlock without populating, there are valid use
cases for depopulating locked ranges as well.
Users mlock memory to protect secrets. There are allocators for secure
buffers that want in-use memory generally mlocked, but cleared and
invalidated memory to give up the physical pages. This could be done with
explicit munlock -> mlock calls on free -> alloc of course, but that adds
two unnecessary syscalls, heavy mmap_sem write locks, vma splits and
re-merges - only to get rid of the backing pages.
Users also mlockall(MCL_ONFAULT) to suppress sustained paging, but are
okay with on-demand initial population. It seems valid to selectively
free some memory during the lifetime of such a process, without having to
mess with its overall policy.
Why add a separate flag? Isn't this a pretty niche usecase?
- MADV_DONTNEED has been bailing on locked vmas forever. It's at least
conceivable that someone, somewhere is relying on mlock to protect
data from perhaps broader invalidation calls. Changing this behavior
now could lead to quiet data corruption.
- It also clarifies expectations around MADV_FREE and maybe
MADV_REMOVE. It avoids the situation where one quietly behaves
different than the others. MADV_FREE_LOCKED can be added later.
- The combination of mlock() and madvise() in the first place is
probably niche. But where it happens, I'd say that dropping pages
from a locked region once they don't contain secrets or won't page
anymore is much saner than relying on mlock to protect memory from
speculative or errant invalidation calls. It's just that we can't
change the default behavior because of the two previous points.
Given that, an explicit new flag seems to make the most sense.
[hannes@cmpxchg.org: fix mips build]
Link: https://lkml.kernel.org/r/20220304171912.305060-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout the
stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"
* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...
|
|
asm/shmbuf.h is currently excluded from the UAPI compile-test because of
the errors like follows:
HDRTEST usr/include/asm/shmbuf.h
In file included from ./usr/include/asm/shmbuf.h:6,
from <command-line>:
./usr/include/asm-generic/shmbuf.h:26:33: error: field ‘shm_perm’ has incomplete type
26 | struct ipc64_perm shm_perm; /* operation perms */
| ^~~~~~~~
./usr/include/asm-generic/shmbuf.h:27:9: error: unknown type name ‘size_t’
27 | size_t shm_segsz; /* size of segment (bytes) */
| ^~~~~~
./usr/include/asm-generic/shmbuf.h:40:9: error: unknown type name ‘__kernel_pid_t’
40 | __kernel_pid_t shm_cpid; /* pid of creator */
| ^~~~~~~~~~~~~~
./usr/include/asm-generic/shmbuf.h:41:9: error: unknown type name ‘__kernel_pid_t’
41 | __kernel_pid_t shm_lpid; /* pid of last operator */
| ^~~~~~~~~~~~~~
The errors can be fixed by replacing size_t with __kernel_size_t and by
including proper headers.
Then, remove the no-header-test entry from user/include/Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
linux/signal.h and asm/signal.h are currently excluded from the UAPI
compile-test because of the errors like follows:
HDRTEST usr/include/asm/signal.h
In file included from <command-line>:
./usr/include/asm/signal.h:103:9: error: unknown type name ‘size_t’
103 | size_t ss_size;
| ^~~~~~
The errors can be fixed by replacing size_t with __kernel_size_t.
Then, remove the no-header-test entries from user/include/Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
