| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Previous releases - regressions:
- ethtool: fix NULL pointer dereference in phy_reply_size
- netfilter:
- allocate hook ops while under mutex
- close dangling table module init race
- restore nf_conntrack helper propagation via expectation
- tcp:
- fix potential UAF in reqsk_timer_handler().
- fix out-of-bounds access for twsk in tcp_ao_established_key().
- vsock: fix empty payload in tap skb for non-linear buffers
- hsr: fix NULL pointer dereference in hsr_get_node_data()
- eth:
- cortina: fix RX drop accounting
- ice: fix locking in ice_dcb_rebuild()
Previous releases - always broken:
- napi: avoid gro timer misfiring at end of busypoll
- sched:
- dualpi2: initialize timer earlier in dualpi2_init()
- sch_cbs: Call qdisc_reset for child qdisc
- shaper:
- fix ordering issue in net_shaper_commit()
- reject handle IDs exceeding internal bit-width
- ipv6: flowlabel: enforce per-netns limit for unprivileged callers
- tls: fix off-by-one in sg_chain entry count for wrapped sk_msg ring
- smc: avoid NULL deref of conn->lnk in smc_msg_event tracepoint
- sctp: revalidate list cursor after sctp_sendmsg_to_asoc() in SCTP_SENDALL
- batman-adv:
- reject new tp_meter sessions during teardown
- purge non-released claims
- eth:
- i40e: cleanup PTP registration on probe failure
- idpf: fix double free and use-after-free in aux device error paths
- ena: fix potential use-after-free in get_timestamp"
* tag 'net-7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
net: phy: DP83TC811: add reading of abilities
net: tls: prevent chain-after-chain in plain text SG
net: tls: fix off-by-one in sg_chain entry count for wrapped sk_msg ring
net/smc: reject CHID-0 ACCEPT that matches an empty ism_dev slot
macsec: use rcu_work to defer TX SA crypto cleanup out of softirq
macsec: use rcu_work to defer RX SA crypto cleanup out of softirq
macsec: introduce dedicated workqueue for SA crypto cleanup
net: net_failover: Fix the deadlock in slave register
MAINTAINERS: update atlantic driver maintainer
selftests/tc-testing: Add QFQ/CBS qlen underflow test
net/sched: sch_cbs: Call qdisc_reset for child qdisc
FDDI: defza: Sanitise the reset safety timer
net: ethernet: ravb: Do not check URAM suspension when WoL is active
ethtool: fix ethnl_bitmap32_not_zero() bit interval semantics
net/smc: avoid NULL deref of conn->lnk in smc_msg_event tracepoint
net/smc: fix sleep-inside-lock in __smc_setsockopt() causing local DoS
net: atm: fix skb leak in sigd_send() default branch
net: ethtool: phy: avoid NULL deref when PHY driver is unbound
net: atlantic: preserve PCI wake-from-D3 on shutdown when WOL enabled
net: shaper: reject QUEUE scope handle with missing id
...
|
|
The 'dumpability' of a task is fundamentally about the memory image of
the task - the concept comes from whether it can core dump or not - and
makes no sense when you don't have an associated mm.
And almost all users do in fact use it only for the case where the task
has a mm pointer.
But we have one odd special case: ptrace_may_access() uses 'dumpable' to
check various other things entirely independently of the MM (typically
explicitly using flags like PTRACE_MODE_READ_FSCREDS). Including for
threads that no longer have a VM (and maybe never did, like most kernel
threads).
It's not what this flag was designed for, but it is what it is.
The ptrace code does check that the uid/gid matches, so you do have to
be uid-0 to see kernel thread details, but this means that the
traditional "drop capabilities" model doesn't make any difference for
this all.
Make it all make a *bit* more sense by saying that if you don't have a
MM pointer, we'll use a cached "last dumpability" flag if the thread
ever had a MM (it will be zero for kernel threads since it is never
set), and require a proper CAP_SYS_PTRACE capability to override.
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
init_on_free
__GFP_ZEROTAGS semantics are currently a bit weird, but effectively this
flag is only ever set alongside __GFP_ZERO and __GFP_SKIP_KASAN.
If we run with init_on_free, we will zero out pages during
__free_pages_prepare(), to skip zeroing on the allocation path.
However, when allocating with __GFP_ZEROTAG set, post_alloc_hook() will
consequently not only skip clearing page content, but also skip clearing
tag memory.
Not clearing tags through __GFP_ZEROTAGS is irrelevant for most pages that
will get mapped to user space through set_pte_at() later: set_pte_at() and
friends will detect that the tags have not been initialized yet
(PG_mte_tagged not set), and initialize them.
However, for the huge zero folio, which will be mapped through a PMD
marked as special, this initialization will not be performed, ending up
exposing whatever tags were still set for the pages.
The docs (Documentation/arch/arm64/memory-tagging-extension.rst) state
that allocation tags are set to 0 when a page is first mapped to user
space. That no longer holds with the huge zero folio when init_on_free is
enabled.
Fix it by decoupling __GFP_ZEROTAGS from __GFP_ZERO, passing to
tag_clear_highpages() whether we want to also clear page content.
Invert the meaning of the tag_clear_highpages() return value to have
clearer semantics.
Reproduced with the huge zero folio by modifying the check_buffer_fill
arm64/mte selftest to use a 2 MiB area, after making sure that pages have
a non-0 tag set when freeing (note that, during boot, we will not actually
initialize tags, but only set KASAN_TAG_KERNEL in the page flags).
$ ./check_buffer_fill
1..20
...
not ok 17 Check initial tags with private mapping, sync error mode and mmap memory
not ok 18 Check initial tags with private mapping, sync error mode and mmap/mprotect memory
...
This code needs more cleanups; we'll tackle that next, like
decoupling __GFP_ZEROTAGS from __GFP_SKIP_KASAN.
[akpm@linux-foundation.org: s/__GPF_ZERO/__GFP_ZERO/, per David]
Link: https://lore.kernel.org/20260421-zerotags-v2-1-05cb1035482e@kernel.org
Fixes: adfb6609c680 ("mm/huge_memory: initialise the tags of the huge zero folio")
Signed-off-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Lance Yang <lance.yang@linux.dev>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Liam Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, VMBus code initiates a VMBus unload in the panic path so
that if a kdump kernel is loaded, it can start fresh in setting up its
own VMBus connection. However, a driver for the VMBus virtual frame
buffer may need to flush dirty portions of the frame buffer back to
the Hyper-V host so that panic information is visible in the graphics
console. To support such flushing, provide exported functions for the
frame buffer driver to specify that the VMBus unload should not be
done by the VMBus driver, and to initiate the VMBus unload itself.
Together these allow a frame buffer driver to delay the VMBus unload
until after it has completed the flush.
Ideally, the VMBus driver could use its own panic-path callback to do
the unload after all frame buffer drivers have finished. But DRM frame
buffer drivers use the kmsg dump callback, and there are no callbacks
after that in the panic path. Hence this somewhat messy approach to
properly sequencing the frame buffer flush and the VMBus unload.
Fixes: 3671f3777758 ("drm/hyperv: Add support for drm_panic")
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
"The bulk of this is hardening of the new sub-scheduler infrastructure.
- UAFs and lifecycle bugs on the sub-sched attach/detach paths:
parent sub_kset freed under a racing child, list_del_rcu on an
uninitialized list head, ops->priv stomped by concurrent
attach/detach, and a UAF in the init-failure error path
- Task state-machine reorg closing concurrent enable-vs-dead races: a
task exiting during the unlocked init window could trip NULL ops
derefs or skip exit_task() cleanup
- A scx_link_sched() self-deadlock on scx_sched_lock
- isolcpus: stop dereferencing the now-RCU-protected HK_TYPE_DOMAIN
cpumask without RCU, and stop rejecting BPF schedulers when only
cpuset isolated partitions are active
- PREEMPT_RT: disable irq_work runs in hardirq context so dumps show
the failing task rather than the irq_work kthread
- Assorted !CONFIG_EXT_SUB_SCHED, randconfig, and selftest build
fixes"
* tag 'sched_ext-for-7.1-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Use HK_TYPE_DOMAIN_BOOT to detect isolcpus= domain isolation
sched_ext: Defer sub_kset base put to scx_sched_free_rcu_work
sched_ext: INIT_LIST_HEAD() &sch->all in scx_alloc_and_add_sched()
sched_ext: Drop NONE early return in scx_disable_and_exit_task()
sched_ext: Avoid UAF in scx_root_enable_workfn() init failure path
sched_ext: Clear ops->priv on scx_alloc_and_add_sched() error paths
sched_ext: Fix ops->priv clobber on concurrent attach/detach
selftests/sched_ext: Fix build error in dequeue selftest
sched_ext: Handle SCX_TASK_NONE in disable/switched_from paths
sched_ext: Close sub-sched init race with post-init DEAD recheck
sched_ext: Close root-enable vs sched_ext_dead() race with SCX_TASK_INIT_BEGIN
sched_ext: Replace SCX_TASK_OFF_TASKS flag with SCX_TASK_DEAD state
sched_ext: Inline scx_init_task() and move RESET_RUNNABLE_AT into scx_set_task_state()
sched_ext: Cleanups in preparation for the SCX_TASK_INIT_BEGIN/DEAD work
sched_ext: Use IRQ_WORK_INIT_HARD() to initialize sch->disable_irq_work
sched_ext: Fix !CONFIG_EXT_SUB_SCHED build warnings
sched_ext: Drop unused scx_find_sub_sched() stub
sched_ext: Move scx_error() out of scx_link_sched()'s lock region
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- cpuset fixes:
- Partition invalidation could return CPUs still in use by sibling
partitions, producing overlapping effective_cpus
- cpuset_can_attach() over-reserved DL bandwidth on moves that
stayed within the same root domain
- Pending DL migration state leaked into later attaches when a
later can_attach() check failed
- Reorder PF_EXITING and __GFP_HARDWALL checks so dying tasks can
allocate from any node and exit quickly
- dmem: propagate -ENOMEM instead of spinning forever when the fallback
pool allocation also fails
- selftests/cgroup: percpu test error-path leak, bogus numeric
comparison of cpuset strings, and a zero-length read() that silently
passed OOM-kill tests
* tag 'cgroup-for-7.1-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Return only actually allocated CPUs during partition invalidation
selftests/cgroup: Fix error path leaks in test_percpu_basic
cgroup/cpuset: Reserve DL bandwidth only for root-domain moves
cgroup/cpuset: Reset DL migration state on can_attach() failure
selftests/cgroup: Fix string comparison in write_test
selftests/cgroup: Fix cg_read_strcmp() empty string comparison
cgroup/dmem: Return -ENOMEM on failed pool preallocation
cgroup/cpuset: move PF_EXITING check before __GFP_HARDWALL in cpuset_current_node_allowed()
|
|
VFIO_PCI_OFFSET_TO_INDEX() is used in several places with a signed
parameter (e.g. loff_t). Because it makes no sense for a BAR/resource
index to be negative, enforce this in the macro.
This fixes at least one current issue, where vfio_pci_ioeventfd() uses
this macro with an unvalidated signed loff_t returned into a signed
type, leading to a possible negative array access. This instance does
test against an out-of-bounds positive value, so treating the index as
unsigned fixes this issue.
Fixes: 89e1f7d4c66d8 ("vfio: Add PCI device driver")
Signed-off-by: Matt Evans <mattev@meta.com>
Link: https://lore.kernel.org/r/20260511144642.2926799-1-mattev@meta.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
When bouncing for block size > PAGE_SIZE file systems that require
file system block size alignment (e.g. zoned XFS), the bio needs to
be big enough to fit an entire block.
Fixes: 8dd5e7c75d7b ("block: add helpers to bounce buffer an iov_iter into bios")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260507050153.1298375-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull kvm fixes from Paolo Bonzini:
"arm64:
- Add the pKVM side of the workaround for ARM's erratum 4193714,
provided that the EL3 firmware does its part of the job. KVM will
refuse to initialise otherwise
- Correctly handle 52bit VAs for guest EL2 stage-1 translations when
running under NV with E2H==0
- Correctly deal with permission faults in guest_memfd memslots
- Fix the steal-time selftest after the infrastructure was reworked
- Make sure the host cannot pass a non-sensical clock update to the
EL2 tracing infrastructure
- Appoint Steffen Eiden as a reviewer in anticipation of the KVM/s390
ability to run arm64 guests, which will inevitably lead to arm64
code being directly used on s390
- Make sure that EL2 is configured with both exception entry and exit
being Context Synchronization Events
- Handle the current vcpu being NULL on EL2 panic
- Fix the selftest_vcpu memcache being empty at the point of donation
or sharing
- Check that the memcache has enough capacity before engaging on the
share/donate path
- Fix __deactivate_fgt() to use its parameter rather than a variable
in the macro context
s390:
- Fix array overrun with large amounts of PCI devices
x86:
- Never use L0's PAUSE loop exiting while L2 is running, since it's
unlikely that a nested guest will help solving the hypervisor's
spinlock contention
- Fix emulation of MOVNTDQA
- Fix typo in Xen hypercall tracepoint
- Add back an optimization that was left behind when recently fixing
a bug
- Add module parameter to disable CET, whose implementation seems to
have issues. For now it remains enabled by default
Generic:
- Reject offset causing an unsigned overflow in kvm_reset_dirty_gfn()
Documentation:
- Update stale links
Selftests:
- Fix guest_memfd_test with host page size > guest page size"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits)
KVM: VMX: introduce module parameter to disable CET
KVM: x86: Swap the dst and src operand for MOVNTDQA
KVM: x86: use again the flush argument of __link_shadow_page()
KVM: selftests: Ensure gmem file sizes are multiple of host page size
Documentation: kvm: update links in the references section of AMD Memory Encryption
KVM: nSVM: Never use L0's PAUSE loop exiting while L2 is running
KVM: x86: Fix Xen hypercall tracepoint argument assignment
KVM: Reject wrapped offset in kvm_reset_dirty_gfn()
KVM: arm64: Pre-check vcpu memcache for host->guest donate
KVM: arm64: Pre-check vcpu memcache for host->guest share
KVM: arm64: Seed pkvm_ownership_selftest vcpu memcache
KVM: arm64: Fix __deactivate_fgt macro parameter typo
KVM: arm64: Guard against NULL vcpu on VHE hyp panic path
KVM: arm64: Make EL2 exception entry and exit context-synchronization events
MAINTAINERS: Add Steffen as reviewer for KVM/arm64
KVM: arm64: Remove potential UB on nvhe tracing clock update
KVM: selftests: arm64: Fix steal_time test after UAPI refactoring
KVM: arm64: Handle permission faults with guest_memfd
KVM: arm64: nv: Consider the DS bit when translating TCR_EL2
KVM: arm64: Work around C1-Pro erratum 4193714 for protected guests
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- kprobes: skip non-symbol addresses in kprobe_add_ksym_blacklist()
Since the ftrace adds its NOPs at .kprobes.text section (which stores
an array), a wrong entry is added when loading a module which uses
"__kprobes" attribute.
To solve this, add "notrace" to __kprobes functions
- test_kprobes: clear kprobes between test runs
Clear all kprobes in the test program after running a test set,
because Kunit test can run several times
- fprobe: Fix unregister_fprobe() to wait for RCU grace period
Since the fprobe data structure is removed with hlist_del_rcu(), it
should wait for the RCU grace period. If the caller waits for RCU, we
can use the async variant (e.g. eBPF)
* tag 'probes-fixes-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fprobe: Fix unregister_fprobe() to wait for RCU grace period
test_kprobes: clear kprobes between test runs
kprobes: skip non-symbol addresses in kprobe_add_ksym_blacklist()
|
|
hid_input_report() is used in too many places to have a commit that
doesn't cross subsystem borders. Instead of changing the API, introduce
a new one when things matters in the transport layers:
- usbhid
- i2chid
This effectively revert to the old behavior for those two transport
layers.
Fixes: 0a3fe972a7cb ("HID: core: Mitigate potential OOB by removing bogus memset()")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
commit 0a3fe972a7cb ("HID: core: Mitigate potential OOB by removing
bogus memset()") enforced the provided data to be at least the size of
the declared buffer in the report descriptor to prevent a buffer
overflow. However, we can try to be smarter by providing both the buffer
size and the data size, meaning that hid_report_raw_event() can make
better decision whether we should plaining reject the buffer (buffer
overflow attempt) or if we can safely memset it to 0 and pass it to the
rest of the stack.
Fixes: 0a3fe972a7cb ("HID: core: Mitigate potential OOB by removing bogus memset()")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
netfs_unlock_abandoned_read_pages(rreq) accesses the index of the folios it
is wanting to unlock and compares that to rreq->no_unlock_folio so that it
doesn't unlock a folio being read for netfs_perform_write() or
netfs_write_begin().
However, given that netfs_unlock_abandoned_read_pages() is called _after_
NETFS_RREQ_IN_PROGRESS is cleared, the one folio that it's not allowed to
dereference is the one specified by ->no_unlock_folio as ownership
immediately reverts to the caller.
Fix this by storing the folio pointer instead and using that rather than
the index. Also fix netfs_unlock_read_folio() where the same applies.
Fixes: ee4cdf7ba857 ("netfs: Speed up buffered reading")
Closes: https://sashiko.dev/#/patchset/20260414082004.3756080-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/20260512123404.719402-20-dhowells@redhat.com
cc: Paulo Alcantara <pc@manguebit.org>
cc: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Fix potential tearing in using ->remote_i_size and ->zero_point by copying
i_size_read() and i_size_write() and using the same seqcount as for i_size.
We need to make sure that netfslib and the filesystems that use it always
hold i_lock whilst updating any of the sizes to prevent i_size_seqcount
from getting corrupted.
Fixes: 4058f742105e ("netfs: Keep track of the actual remote file size")
Fixes: 100ccd18bb41 ("netfs: Optimise away reads above the point at which there can be no data")
Closes: https://sashiko.dev/#/patchset/20260414082004.3756080-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/20260512123404.719402-6-dhowells@redhat.com
cc: Paulo Alcantara <pc@manguebit.org>
cc: Matthew Wilcox <willy@infradead.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The list of subrequests attached to stream->subrequests is accessed without
locks by netfs_collect_read_results() and netfs_collect_write_results(),
and then they access subreq->flags without taking a barrier after getting
the subreq pointer from the list. Relatedly, the functions that build the
list don't use any sort of write barrier when constructing the list to make
sure that the NETFS_SREQ_IN_PROGRESS flag is perceived to be set first if
no lock is taken.
Fix this by:
(1) Add a new list_add_tail_release() function that uses a release barrier
to set the pointer to the new member of the list.
(2) Add a new list_first_entry_or_null_acquire() function that uses an
acquire barrier to read the pointer to the first member in a list (or
return NULL).
(3) Use list_add_tail_release() when adding a subreq to ->subrequests.
(4) Use list_first_entry_or_null_acquire() when initially accessing the
front of the list (when an item is removed, the pointer to the new
front iterm is obtained under the same lock).
Fixes: e2d46f2ec332 ("netfs: Change the read result collector to only use one work item")
Fixes: 288ace2f57c9 ("netfs: New writeback implementation")
Link: https://sashiko.dev/#/patchset/20260326104544.509518-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/20260512123404.719402-4-dhowells@redhat.com
cc: Paulo Alcantara <pc@manguebit.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
cpuset_can_attach() currently adds the bandwidth of all migrating
SCHED_DEADLINE tasks to sum_migrate_dl_bw. If the source and destination
cpuset effective CPU masks do not overlap, the whole sum is then
reserved in the destination root domain.
set_cpus_allowed_dl(), however, subtracts bandwidth from the source
root domain only when the affinity change really moves the task between
root domains. A DL task can move between cpusets that are still in the
same root domain, so including that task in sum_migrate_dl_bw can reserve
destination bandwidth without a matching source-side subtraction.
Share the root-domain move test with set_cpus_allowed_dl(). Keep
nr_migrate_dl_tasks counting all migrating deadline tasks for cpuset DL
task accounting, but add to sum_migrate_dl_bw only for tasks that need a
root-domain bandwidth move. Keep using the destination cpuset effective
CPU mask and leave the broader can_attach()/attach() transaction model
unchanged.
Fixes: 2ef269ef1ac0 ("cgroup/cpuset: Free DL BW in case can_attach() fails")
Cc: stable@vger.kernel.org # v6.10+
Signed-off-by: Guopeng Zhang <zhangguopeng@kylinos.cn>
Reviewed-by: Waiman Long <longman@redhat.com>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Currently, the BPF instruction set allows bpf-to-bpf calls (or internal
calls, pseudo calls) to use a 32-bit imm field to represent the relative
jump offset.
However, when JIT is disabled or falls back to the interpreter, the
verifier invokes bpf_patch_call_args() to rewrite the call instruction.
In this function, the 32-bit imm is downcast to s16 and stored in the off
field.
void bpf_patch_call_args(struct bpf_insn *insn, u32 stack_depth)
{
stack_depth = max_t(u32, stack_depth, 1);
insn->off = (s16) insn->imm;
insn->imm = interpreters_args[(round_up(stack_depth, 32) / 32) - 1] -
__bpf_call_base_args;
insn->code = BPF_JMP | BPF_CALL_ARGS;
}
If the original imm exceeds the s16 range (i.e., a jump offset greater
than 32767 instructions), this downcast silently truncates the offset,
resulting in an incorrect call target.
Fix this by:
1. In bpf_patch_call_args(), keeping the imm field unchanged and using the
off field to store the index of the interpreter function.
2. In ___bpf_prog_run() for the JMP_CALL_ARGS case, retrieving the
interpreter function pointer from the interpreters_args array using the
off field as the index, and passing the original imm to calculate the
last argument of the interpreter function.
After these changes, the truncation issue is resolved, and __bpf_call_base_args
is also no longer needed and can be removed, which makes the code cleaner.
Performance: In ___bpf_prog_run() for the JMP_CALL_ARGS case, changing the
retrieval of the interpreter function pointer from pointer addition to
direct array indexing improves performance. The possible reason is that the
latter has better instruction-level parallelism. See the v5 discussion [1]
for more details.
[1] https://lore.kernel.org/bpf/f120c3c4-6999-414a-b514-518bb64b4758@zju.edu.cn/
To avoid requiring bpftool changes, keep the new imm/off encoding internal
and restore the legacy xlated dump layout in bpf_insn_prepare_dump().
For bpf-to-bpf call offsets that do not fit in s16, export off as 0 instead
of a truncated and misleading value.
Fixes: 1ea47e01ad6e ("bpf: add support for bpf_call to interpreter")
Fixes: 7105e828c087 ("bpf: allow for correlation of maps and helpers in dump")
Suggested-by: Xu Kuohai <xukuohai@huaweicloud.com>
Suggested-by: Puranjay Mohan <puranjay@kernel.org>
Co-developed-by: Tianci Cao <ziye@zju.edu.cn>
Signed-off-by: Tianci Cao <ziye@zju.edu.cn>
Co-developed-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Yazhou Tang <tangyazhou518@outlook.com>
Link: https://lore.kernel.org/r/20260506094714.419842-3-tangyazhou@zju.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The interpreters_args array only accommodates stack depths up to
MAX_BPF_STACK (512 bytes). However, do_misc_fixups() may allow a larger
stack depth if JIT is requested.
If JIT compilation later fails and falls back to the interpreter, the
verifier invokes bpf_patch_call_args() with this oversized stack depth.
This causes a load-time out-of-bounds (OOB) read when calculating the
interpreter function pointer index.
Fix this by changing bpf_patch_call_args() to return an int and explicitly
rejecting the JIT fallback (returning -EINVAL) if the stack depth exceeds
MAX_BPF_STACK.
Fixes: 1ea47e01ad6e ("bpf: add support for bpf_call to interpreter")
Co-developed-by: Tianci Cao <ziye@zju.edu.cn>
Signed-off-by: Tianci Cao <ziye@zju.edu.cn>
Co-developed-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Yazhou Tang <tangyazhou518@outlook.com>
Acked-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20260506094714.419842-2-tangyazhou@zju.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Include the definition of struct tty_driver in tty_port.h to keep the
header self-contained and avoid build breakage in case anyone includes
it before tty_driver.h.
Fixes: eb3b0d92c9c3 ("tty: tty_port: add workqueue to flip TTY buffer")
Cc: Xin Zhao <jackzxcui1989@163.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260506124323.186703-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The IPI and ITS MSI domains currently allocate and release LPIs
directly, then pass the selected LPI ID to the parent LPI domain. This
leaks the LPI domain's allocation policy into its child domains and
forces each child to duplicate part of the parent domain's teardown.
Make the LPI domain allocate LPIs in its .alloc() callback and release
them in a matching .free() callback. Child domains can then request a
parent interrupt without passing an implementation-specific LPI ID,
and the LPI lifetime is tied to the domain that owns the LPI
namespace.
Remove the gicv5_alloc_lpi() and gicv5_free_lpi() wrappers now that no
external caller needs to manage LPIs directly.
This is a preparatory change for an actual leakage problem in the
allocation code and therefore tagged with the same Fixes tag.
Fixes: 0f0101325876 ("irqchip/gic-v5: Add GICv5 LPI/IPI support")
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260506093634.382062-2-sascha.bischoff@arm.com
|
|
Commit 4346ba1604093 ("fprobe: Rewrite fprobe on function-graph tracer")
changed fprobe to register struct fprobe to an rcu-hlist, but it forgot
to wait for RCU GP. Thus there can be use-after-free if the fprobe is
released right after unregistering. This can be happened on fprobe
event and sample module code.
To fix this issue, add synchronize_rcu() in unregister_fprobe().
Note that BPF is OK because fprobe is used as a part of
bpf_kprobe_multi_link. This unregisters its fprobe in
bpf_kprobe_multi_link_release() and it is deallocated via
bpf_kprobe_multi_link_dealloc(), which is invoked from
bpf_link_defer_dealloc_rcu_gp() RCU callback.
For BPF, this also introduced unregister_fprobe_async() which does
NOT wait for RCU grace priod.
Link: https://lore.kernel.org/all/177813998919.256460.2809243930741138224.stgit@mhiramat.tok.corp.google.com/
Fixes: 4346ba1604093 ("fprobe: Rewrite fprobe on function-graph tracer")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
scx_root_enable_workfn() drops the iter rq lock for ops.init_task() and a
TASK_DEAD @p can fall through sched_ext_dead() in that window. The race hits
when sched_ext_dead() observes SCX_TASK_INIT (the intermediate state before
@p->scx.sched is published) and dereferences NULL via SCX_HAS_OP(NULL,
exit_task), or observes SCX_TASK_NONE during the unlocked init window and
skips cleanup so exit_task() never runs.
Add SCX_TASK_INIT_BEGIN. The enable path writes NONE -> INIT_BEGIN under the
iter rq lock, then takes the rq lock again after init to walk INIT_BEGIN ->
INIT -> READY. sched_ext_dead() that wins the rq-lock race observes
INIT_BEGIN and sets DEAD without calling into ops; the post-init recheck
unwinds via scx_sub_init_cancel_task().
scx_fork() runs single-threaded against sched_ext_dead() (the task is not on
scx_tasks until scx_post_fork() adds it) so its INIT_BEGIN -> INIT walk
needs no rq-lock pairing; it rolls back to NONE on ops.init_task() failure.
The validation matrix grows the INIT_BEGIN row and the INIT_BEGIN -> DEAD
edge; INIT now requires INIT_BEGIN as the predecessor. scx_sub_disable()'s
migration writes INIT_BEGIN as a synthetic predecessor to satisfy the
tightened verification.
The sub-sched paths still race with sched_ext_dead() during the unlocked
init window. This will be fixed by the next patch.
Reported-by: zhidao su <suzhidao@xiaomi.com>
Link: https://lore.kernel.org/all/20260429133155.3825247-1-suzhidao@xiaomi.com/
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
SCX_TASK_OFF_TASKS marked tasks already through sched_ext_dead() so cgroup
task iteration would skip them. This can be expressed better with a task
state. Replace the flag with SCX_TASK_DEAD.
scx_disable_and_exit_task() resets state to NONE on its way out, so
sched_ext_dead() now sets DEAD after the wrapper returns. The validation
matrix grows NONE -> DEAD, warns on DEAD -> NONE, and tightens READY's
predecessor to INIT or ENABLED so the new DEAD value cannot silently
transition to READY.
Prepares for the following enable vs dead race fix.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
Pull bpf fixes from Alexei Starovoitov:
- Fix sk_local_storage diag dump via netlink (Amery Hung)
- Fix off-by-one in arena direct-value access (Junyoung Jang)
- Reject TCP_NODELAY in bpf-tcp congestion control (KaFai Wan)
- Fix type confusion in bpf_*_sock() (Kuniyuki Iwashima)
- Reject TX-only AF_XDP sockets (Linpu Yu)
- Don't run arg-tracking analysis twice on main subprog (Paul Chaignon)
- Fix NULL pointer dereference in bpf_sk_storage_clone and fib lookup
(Weiming Shi)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix off-by-one boundary validation in arena direct-value access
xskmap: reject TX-only AF_XDP sockets
bpf: Don't run arg-tracking analysis twice on main subprog
bpf: Free reuseport cBPF prog after RCU grace period.
bpf: tcp: Fix type confusion in sol_tcp_sockopt().
bpf: tcp: Fix type confusion in bpf_skc_to_tcp6_sock().
bpf: tcp: Fix type confusion in bpf_skc_to_tcp_sock().
mptcp: bpf: Fix type confusion in bpf_mptcp_sock_from_subflow()
selftest: bpf: Add test for bpf_tcp_sock() and RAW socket.
bpf: tcp: Fix type confusion in bpf_tcp_sock().
tools/headers: Regenerate stddef.h to fix BPF selftests
bpf: Fix sk_local_storage diag dumping uninitialized special fields
bpf: Fix NULL pointer dereference in bpf_skb_fib_lookup()
sockmap: Fix sk_psock_drop() race vs sock_map_{unhash,close,destroy}().
bpf: Fix NULL pointer dereference in bpf_sk_storage_clone and diag paths
selftests/bpf: Verify bpf-tcp-cc rejects TCP_NODELAY
selftests/bpf: Test TCP_NODELAY in TCP hdr opt callbacks
bpf: Reject TCP_NODELAY in bpf-tcp-cc
bpf: Reject TCP_NODELAY in TCP header option callbacks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix spurious failures in rseq self-tests (Mark Brown)
- Fix rseq rseq::cpu_id_start ABI regression due to TCMalloc's creative
use of the supposedly read-only field
The fix is to introduce a new ABI variant based on a new (larger)
rseq area registration size, to keep the TCMalloc use of rseq
backwards compatible on new kernels (Thomas Gleixner)
- Fix wakeup_preempt_fair() for not waking up task (Vincent Guittot)
- Fix s64 mult overflow in vruntime_eligible() (Zhan Xusheng)
* tag 'sched-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix wakeup_preempt_fair() for not waking up task
sched/fair: Fix overflow in vruntime_eligible()
selftests/rseq: Expand for optimized RSEQ ABI v2
rseq: Reenable performance optimizations conditionally
rseq: Implement read only ABI enforcement for optimized RSEQ V2 mode
selftests/rseq: Validate legacy behavior
selftests/rseq: Make registration flexible for legacy and optimized mode
selftests/rseq: Skip tests if time slice extensions are not available
rseq: Revert to historical performance killing behaviour
rseq: Don't advertise time slice extensions if disabled
rseq: Protect rseq_reset() against interrupts
rseq: Set rseq::cpu_id_start to 0 on unregistration
selftests/rseq: Don't run tests with runner scripts outside of the scripts
|
|
Mathias Stearn reports that since v6.19, there are two big issues
affecting rseq:
(1) On arm64 specifically, rseq critical sections aren't aborted when
they should be.
(2) The 'cpu_id_start' field is no longer written by the kernel in all
cases it used to be, including some cases where TCMalloc depends on
the kernel clobbering the field.
This patch fixes issue #1. This patch DOES NOT fix issue #2, which will
need to be addressed by other patches.
The arm64-specific brokenness is a result of commits:
2fc0e4b4126c ("rseq: Record interrupt from user space")
39a167560a61 ("rseq: Optimize event setting")
The first commit failed to add a call to rseq_note_user_irq_entry() on
arm64. Thus arm64 never sets rseq_event::user_irq to record that it may
be necessary to abort an active rseq critical section upon return to
userspace. On its own, this commit had no functional impact as the value
of rseq_event::user_irq was not consumed.
The second commit relied upon rseq_event::user_irq to determine whether
or not to bother to perform rseq work when returning to userspace. As
rseq_event::user_irq wasn't set on arm64, this work would be skipped,
and consequently an active rseq critical section would not be aborted.
Fix this by giving arm64 syscall-specific entry/exit paths, and
performing the relevant logic in syscall and non-syscall paths,
including calling rseq_note_user_irq_entry() for non-syscall entry.
Currently arm64 cannot use syscall_enter_from_user_mode(),
syscall_exit_to_user_mode(), and irqentry_exit_to_user_mode(), due to
ordering constraints with exception masking, and risk of ABI breakage
for syscall tracing/audit/etc. For the moment the entry/exit logic is
left as arm64-specific, directly using enter_from_user_mode() and
exit_to_user_mode(), but mirroring the generic code.
I intend to follow up with refactoring/cleanup, as we did for kernel
mode entry paths in commit:
041aa7a85390 ("entry: Split preemption from irqentry_exit_to_kernel_mode()")
... which will allow arm64 to use the GENERIC_IRQ_ENTRY functions directly.
Fixes: 39a167560a61 ("rseq: Optimize event setting")
Reported-by: Mathias Stearn <mathias@mongodb.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/regressions/CAHnCjA25b+nO2n5CeifknSKHssJpPrjnf+dtr7UgzRw4Zgu=oA@mail.gmail.com/
Link: https://patch.msgid.link/20260508142023.3268622-1-mark.rutland@arm.com
|
|
Previous change added xtables_unregister_table_pre_exit to detach the
table from the packetpath and to unlink it from the active table list.
In case of rmmod, userspace that is doing set/getsockopt for this table
will not be able to re-instantiate the table:
1. The larval table has been removed already
2. existing instantiated table is no longer on the xt pernet table list.
This adds the second stage helper:
unlink the table from the dying list, free the hook ops (if any) and do
the audit notification. It replaces xt_unregister_table().
Fixes: fdacd57c79b7 ("netfilter: x_tables: never register tables by default")
Reported-by: Tristan Madani <tristan@talencesecurity.com>
Reviewed-by: Tristan Madani <tristan@talencesecurity.com>
Closes: https://lore.kernel.org/netfilter-devel/20260429175613.1459342-1-tristmd@gmail.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Remove the copypasted variants of _pre_exit and add one single
function in the xtables core. ebtables is not compatible with
x_tables and therefore unchanged.
This is a preparation patch to reduce noise in the followup
bug fixes.
Reviewed-by: Tristan Madani <tristan@talencesecurity.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
arp/ip(6)t_register_table() add the table to the per-netns list via
xt_register_table() before allocating the per-netns hook ops copy
via kmemdup_array(). This leaves a window where the table is
visible in the list with ops=NULL.
If the pernet exit happens runs concurrently the pre_exit callback finds
the table via xt_find_table() and passes the NULL ops pointer to
nf_unregister_net_hooks(), causing a NULL dereference:
general protection fault in nf_unregister_net_hooks+0xbc/0x150
RIP: nf_unregister_net_hooks (net/netfilter/core.c:613)
Call Trace:
ipt_unregister_table_pre_exit
iptable_mangle_net_pre_exit
ops_pre_exit_list
cleanup_net
Fix by moving the ops allocation into the xtables core so the table is
never in the list without valid ops. Also ensure the table is no longer
processing packets before its torn down on error unwind.
nf_register_net_hooks might have published at least one hook; call
synchronize_rcu() if there was an error.
audit log register message gets deferred until all operations have
passed, this avoids need to emit another ureg message in case of
error unwinding.
Based on earlier patch by Tristan Madani.
Fixes: f9006acc8dfe5 ("netfilter: arp_tables: pass table pointer via nf_hook_ops")
Fixes: ee177a54413a ("netfilter: ip6_tables: pass table pointer via nf_hook_ops")
Fixes: ae689334225f ("netfilter: ip_tables: pass table pointer via nf_hook_ops")
Link: https://lore.kernel.org/netfilter-devel/20260429175613.1459342-1-tristmd@gmail.com/
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter, IPsec, Bluetooth and WiFi.
Current release - fix to a fix:
- ipmr: add __rcu to netns_ipv4.mrt, make sure we hold the RCU lock
in all relevant places
Current release - new code bugs:
- fixes for the recently added resizable hash tables
- ipv6: make sure we default IPv6 tunnel drivers to =m now that IPv6
itself is built in
- drv: octeontx2-af: fixes for parser/CAM fixes
Previous releases - regressions:
- phy: micrel: fix LAN8814 QSGMII soft reset
- wifi:
- cw1200: revert "Fix locking in error paths"
- ath12k: fix crash on WCN7850, due to adding the same queue
buffer to a list multiple times
Previous releases - always broken:
- number of info leak fixes
- ipv6: implement limits on extension header parsing
- wifi: number of fixes for missing bound checks in the drivers
- Bluetooth: fixes for races and locking issues
- af_unix:
- fix an issue between garbage collection and PEEK
- fix yet another issue with OOB data
- xfrm: esp: avoid in-place decrypt on shared skb frags
- netfilter: replace skb_try_make_writable() by skb_ensure_writable()
- openvswitch: vport: fix race between tunnel creation and linking
leading to invalid memory accesses (type confusion)
- drv: amd-xgbe: fix PTP addend overflow causing frozen clock
Misc:
- sched/isolation: make HK_TYPE_KTHREAD an alias of HK_TYPE_DOMAIN
(for relevant IPVS change)"
* tag 'net-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (190 commits)
net: sparx5: configure serdes for 1000BASE-X in sparx5_port_init()
net: sparx5: fix wrong chip ids for TSN SKUs
net: stmmac: dwmac-nuvoton: fix NULL pointer dereference in nvt_set_phy_intf_sel()
tcp: Fix dst leak in tcp_v6_connect().
ipmr: Call ipmr_fib_lookup() under RCU.
net: phy: broadcom: Save PHY counters during suspend
net/smc: fix missing sk_err when TCP handshake fails
af_unix: Reject SIOCATMARK on non-stream sockets
veth: fix OOB txq access in veth_poll() with asymmetric queue counts
eth: fbnic: fix double-free of PCS on phylink creation failure
net: ethernet: cortina: Drop half-assembled SKB
selftests: mptcp: pm: restrict 'unknown' check to pm_nl_ctl
selftests: mptcp: check output: catch cmd errors
mptcp: pm: prio: skip closed subflows
mptcp: pm: ADD_ADDR rtx: return early if no retrans
mptcp: pm: ADD_ADDR rtx: skip inactive subflows
mptcp: pm: ADD_ADDR rtx: resched blocked ADD_ADDR quicker
mptcp: pm: ADD_ADDR rtx: free sk if last
mptcp: pm: ADD_ADDR rtx: always decrease sk refcount
mptcp: pm: ADD_ADDR rtx: fix potential data-race
...
|
|
In some cases a driver using services of vsec_tpmi driver requires some
processing before vsec_tpmi exits. For example a children using debugfs
can't use debugfs as this will be deleted by the vsec_tpmi driver.
This is the case when unbind using PCI driver interface. In this case
the remove callback of vsec_tpmi driver is called first, then remove
callback of its children.
Add support of blocking chain notifiers support. Notify on successful probe
and before clean up in the remove callback.
Fixes: 811f67c51636 ("platform/x86/intel/tpmi: Add new auxiliary driver for performance limits")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Stable@vger.kernel.org
Link: https://patch.msgid.link/20260430151103.1549733-3-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Pull smb server fixes from Steve French:
- Fix memory leak in connection free
- Fix inherited ACL ACE validation
- Minor cleanup
- Fix for share config
- Fix durable handle cleanup race
- Fix close_file_table_ids in session teardown
- smbdirect fixes:
- Fix memory region registration
- Two fixes for out-of-tree builds
* tag 'v7.1-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: validate inherited ACE SID length
ksmbd: fix kernel-doc warnings from ksmbd_conn_get/put()
ksmbd: fail share config requests when path allocation fails
ksmbd: close durable scavenger races against m_fp_list lookups
ksmbd: harden file lifetime during session teardown
ksmbd: centralize ksmbd_conn final release to plug transport leak
smb: smbdirect: fix MR registration for coalesced SG lists
smb: smbdirect: introduce and use include/linux/smbd |
