| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
ssh://github.com/masneyb/linux into clk-round
Pull round_rate refactoring from Brian Masney:
Now that all of the dependencies across the tree have been merged into
Linus's tree, here's a small series with the following changes:
- Converts clk-composite from round_rate() to determine_rate()
- Removes the round_rate() clk op
- Removes the deprecated functions divider_round_rate(),
divider_round_rate_parent(), and divider_ro_round_rate_parent() since
these are just wrappers for the corresponding determine_rate variant
* tag 'clk-remove-deprecated-apis-v7.1' of ssh://github.com/masneyb/linux:
clk: divider: remove divider_round_rate() and divider_round_rate_parent()
clk: divider: remove divider_ro_round_rate_parent()
clk: remove round_rate() clk ops
clk: composite: convert from round_rate() to determine_rate()
clk: test: remove references to clk_ops.round_rate
|
|
The moment we link a "struct device" into the list of devices for the
bus, it's possible probe can happen. This is because another thread
can load the driver at any time and that can cause the device to
probe. This has been seen in practice with a stack crawl that looks
like this [1]:
really_probe()
__driver_probe_device()
driver_probe_device()
__driver_attach()
bus_for_each_dev()
driver_attach()
bus_add_driver()
driver_register()
__platform_driver_register()
init_module() [some module]
do_one_initcall()
do_init_module()
load_module()
__arm64_sys_finit_module()
invoke_syscall()
As a result of the above, it was seen that device_links_driver_bound()
could be called for the device before "dev->fwnode->dev" was
assigned. This prevented __fw_devlink_pickup_dangling_consumers() from
being called which meant that other devices waiting on our driver's
sub-nodes were stuck deferring forever.
It's believed that this problem is showing up suddenly for two
reasons:
1. Android has recently (last ~1 year) implemented an optimization to
the order it loads modules [2]. When devices opt-in to this faster
loading, modules are loaded one-after-the-other very quickly. This
is unlike how other distributions do it. The reproduction of this
problem has only been seen on devices that opt-in to Android's
"parallel module loading".
2. Android devices typically opt-in to fw_devlink, and the most
noticeable issue is the NULL "dev->fwnode->dev" in
device_links_driver_bound(). fw_devlink is somewhat new code and
also not in use by all Linux devices.
Even though the specific symptom where "dev->fwnode->dev" wasn't
assigned could be fixed by moving that assignment higher in
device_add(), other parts of device_add() (like the call to
device_pm_add()) are also important to run before probe. Only moving
the "dev->fwnode->dev" assignment would likely fix the current
symptoms but lead to difficult-to-debug problems in the future.
Fix the problem by preventing probe until device_add() has run far
enough that the device is ready to probe. If somehow we end up trying
to probe before we're allowed, __driver_probe_device() will return
-EPROBE_DEFER which will make certain the device is noticed.
In the race condition that was seen with Android's faster module
loading, we will temporarily add the device to the deferred list and
then take it off immediately when device_add() probes the device.
Instead of adding another flag to the bitfields already in "struct
device", instead add a new "flags" field and use that. This allows us
to freely change the bit from different thread without worrying about
corrupting nearby bits (and means threads changing other bit won't
corrupt us).
[1] Captured on a machine running a downstream 6.6 kernel
[2] https://cs.android.com/android/platform/superproject/main/+/main:system/core/libmodprobe/libmodprobe.cpp?q=LoadModulesParallel
Cc: stable@vger.kernel.org
Fixes: 2023c610dc54 ("Driver core: add new device to bus's list before probing")
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260406162231.v5.1.Id750b0fbcc94f23ed04b7aecabcead688d0d8c17@changeid
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Instead of repeating the command opcode twice, some flash devices try to
pack command and address bits. In this case, the second opcode byte
being sent (LSB) is free to be used. The input data must be ANDed to
only provide the relevant bits.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260410-winbond-6-19-rc1-oddr-v1-2-2ac4827a3868@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
to resolve the conflict with urgent fixes.
|
|
Remove the check that rejects sleepable BPF programs from doing
BPF_ANY/BPF_EXIST updates on local storage. This restriction was added
in commit b00fa38a9c1c ("bpf: Enable non-atomic allocations in local
storage") because kzalloc(GFP_KERNEL) could sleep inside
local_storage->lock. This is no longer a concern: all local storage
allocations now use kmalloc_nolock() which never sleeps.
In addition, since kmalloc_nolock() only accepts __GFP_ACCOUNT,
__GFP_ZERO and __GFP_NO_OBJ_EXT, the gfp_flags parameter plumbing from
bpf_*_storage_get() to bpf_local_storage_update() becomes dead code.
Remove gfp_flags from bpf_selem_alloc(), bpf_local_storage_alloc() and
bpf_local_storage_update(). Drop the hidden 5th argument from
bpf_*_storage_get helpers, and remove the verifier patching that
injected GFP_KERNEL/GFP_ATOMIC into the fifth argument.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/r/20260411015419.114016-4-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Switch to kmalloc_nolock() universally in local storage. Socket local
storage didn't move to kmalloc_nolock() when BPF memory allocator was
replaced by it for performance reasons. Now that kfree_rcu() supports
freeing memory allocated by kmalloc_nolock(), we can move the remaining
local storages to use kmalloc_nolock() and cleanup the cluttered free
paths.
Use kfree() instead of kfree_nolock() in bpf_selem_free_trace_rcu() and
bpf_local_storage_free_trace_rcu(). Both callbacks run in process context
where spinning is allowed, so kfree_nolock() is unnecessary.
Benchmark:
./bench -p 1 local-storage-create --storage-type socket \
--batch-size {16,32,64}
The benchmark is a microbenchmark stress-testing how fast local storage
can be created. There is no measurable throughput change for socket local
storage after switching from kzalloc() to kmalloc_nolock().
Socket local storage
batch creation speed diff
--------------- ---- ------------------ ----
Baseline 16 433.9 ± 0.6 k/s
32 434.3 ± 1.4 k/s
64 434.2 ± 0.7 k/s
After 16 439.0 ± 1.9 k/s +1.2%
32 437.3 ± 2.0 k/s +0.7%
64 435.8 ± 2.5k/s +0.4%
Also worth noting that the baseline got a 5% throughput boost when sheaf
replaces percpu partial slab recently [0].
[0] https://lore.kernel.org/bpf/20260123-sheaves-for-all-v4-0-041323d506f7@suse.cz/
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/r/20260411015419.114016-3-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
"Before v7.0 is released, fix a few issues with the CFI patchset,
merged earlier in v7.0-rc, that primarily affect interfaces to
non-kernel code:
- Improve the prctl() interface for per-task indirect branch landing
pad control to expand abbreviations and to resemble the speculation
control prctl() interface
- Expand the "LP" and "SS" abbreviations in the ptrace uapi header
file to "branch landing pad" and "shadow stack", to improve
readability
- Fix a typo in a CFI-related macro name in the ptrace uapi header
file
- Ensure that the indirect branch tracking state and shadow stack
state are unlocked immediately after an exec() on the new task so
that libc subsequently can control it
- While working in this area, clean up the kernel-internal,
cross-architecture prctl() function names by expanding the
abbreviations mentioned above"
* tag 'riscv-for-linus-v7.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
prctl: cfi: change the branch landing pad prctl()s to be more descriptive
riscv: ptrace: cfi: expand "SS" references to "shadow stack" in uapi headers
prctl: rename branch landing pad implementation functions to be more explicit
riscv: ptrace: expand "LP" references to "branch landing pads" in uapi headers
riscv: cfi: clear CFI lock status in start_thread()
riscv: ptrace: cfi: fix "PRACE" typo in uapi header
|
|
All Google SoCs support peer-to-peer DMA between Root Ports, so add a
wildcard rule to the host bridge list.
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: David Hu <xuehaohu@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://patch.msgid.link/20260409150123.3538444-2-jmoroni@google.com
|
|
As a sanity check poison stack slots that stack liveness determined
to be dead, so that any read from such slots will cause program rejection.
If stack liveness logic is incorrect the poison can cause
valid program to be rejected, but it also will prevent unsafe program
to be accepted.
Allow global subprogs "read" poisoned stack slots.
The static stack liveness determined that subprog doesn't read certain
stack slots, but sizeof(arg_type) based global subprog validation
isn't accurate enough to know which slots will actually be read by
the callee, so it needs to check full sizeof(arg_type) at the caller.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-14-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Instead of breadcrumbs like:
(d2,cs15) frame 0 insn 18 +live -16
(d2,cs15) frame 0 insn 17 +live -16
Print final accumulated stack use/def data per-func_instance
per-instruction. printed func_instance's are ordered by callsite and
depth. For example:
stack use/def subprog#0 shared_instance_must_write_overwrite (d0,cs0):
0: (b7) r1 = 1
1: (7b) *(u64 *)(r10 -8) = r1 ; def: fp0-8
2: (7b) *(u64 *)(r10 -16) = r1 ; def: fp0-16
3: (bf) r1 = r10
4: (07) r1 += -8
5: (bf) r2 = r10
6: (07) r2 += -16
7: (85) call pc+7 ; use: fp0-8 fp0-16
8: (bf) r1 = r10
9: (07) r1 += -16
10: (bf) r2 = r10
11: (07) r2 += -8
12: (85) call pc+2 ; use: fp0-8 fp0-16
13: (b7) r0 = 0
14: (95) exit
stack use/def subprog#1 forwarding_rw (d1,cs7):
15: (85) call pc+1 ; use: fp0-8 fp0-16
16: (95) exit
stack use/def subprog#1 forwarding_rw (d1,cs12):
15: (85) call pc+1 ; use: fp0-8 fp0-16
16: (95) exit
stack use/def subprog#2 write_first_read_second (d2,cs15):
17: (7a) *(u64 *)(r1 +0) = 42
18: (79) r0 = *(u64 *)(r2 +0) ; use: fp0-8 fp0-16
19: (95) exit
For groups of three or more consecutive stack slots, abbreviate as
follows:
25: (85) call bpf_loop#181 ; use: fp2-8..-512 fp1-8..-512 fp0-8..-512
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-10-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Rework func_instance identification and remove the dynamic liveness
API, completing the transition to fully static stack liveness analysis.
Replace callchain-based func_instance keys with (callsite, depth)
pairs. The full callchain (all ancestor callsites) is no longer part
of the hash key; only the immediate callsite and the call depth
matter. This does not lose precision in practice and simplifies the
data structure significantly: struct callchain is removed entirely,
func_instance stores just callsite, depth.
Drop must_write_acc propagation. Previously, must_write marks were
accumulated across successors and propagated to the caller via
propagate_to_outer_instance(). Instead, callee entry liveness
(live_before at subprog start) is pulled directly back to the
caller's callsite in analyze_subprog() after each callee returns.
Since (callsite, depth) instances are shared across different call
chains that invoke the same subprog at the same depth, must_write
marks from one call may be stale for another. To handle this,
analyze_subprog() records into a fresh_instance() when the instance
was already visited (must_write_initialized), then merge_instances()
combines the results: may_read is unioned, must_write is intersected.
This ensures only slots written on ALL paths through all call sites
are marked as guaranteed writes.
This replaces commit_stack_write_marks() logic.
Skip recursive descent into callees that receive no FP-derived
arguments (has_fp_args() check). This is needed because global
subprogram calls can push depth beyond MAX_CALL_FRAMES (max depth
is 64 for global calls but only 8 frames are accommodated for FP
passing). It also handles the case where a callback subprog cannot be
determined by argument tracking: such callbacks will be processed by
analyze_subprog() at depth 0 independently.
Update lookup_instance() (used by is_live_before queries) to search
for the func_instance with maximal depth at the corresponding
callsite, walking depth downward from frameno to 0. This accounts for
the fact that instance depth no longer corresponds 1:1 to
bpf_verifier_state->curframe, since skipped non-FP calls create gaps.
Remove the dynamic public liveness API from verifier.c:
- bpf_mark_stack_{read,write}(), bpf_reset/commit_stack_write_marks()
- bpf_update_live_stack(), bpf_reset_live_stack_callchain()
- All call sites in check_stack_{read,write}_fixed_off(),
check_stack_range_initialized(), mark_stack_slot_obj_read(),
mark/unmark_stack_slots_{dynptr,iter,irq_flag}()
- The per-instruction write mark accumulation in do_check()
- The bpf_update_live_stack() call in prepare_func_exit()
mark_stack_read() and mark_stack_write() become static functions in
liveness.c, called only from the static analysis pass. The
func_instance->updated and must_write_dropped flags are removed.
Remove spis_single_slot(), spis_one_bit() helpers from bpf_verifier.h
as they are no longer used.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Tested-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-9-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
After arg tracking reaches a fixed point, perform a single linear scan
over the converged at_in[] state and translate each memory access into
liveness read/write masks on the func_instance:
- Load/store instructions: FP-derived pointer's frame and offset(s)
are converted to half-slot masks targeting
per_frame_masks->{may_read,must_write}
- Helper/kfunc calls: record_call_access() queries
bpf_helper_stack_access_bytes() / bpf_kfunc_stack_access_bytes()
for each FP-derived argument to determine access size and direction.
Unknown access size (S64_MIN) conservatively marks all slots from
fp_off to fp+0 as read.
- Imprecise pointers (frame == ARG_IMPRECISE): conservatively mark
all slots in every frame covered by the pointer's frame bitmask
as fully read.
- Static subprog calls with unresolved arguments: conservatively mark
all frames as fully read.
Instead of a call to clean_live_states(), start cleaning the current
state continuously as registers and stack become dead since the static
analysis provides complete liveness information. This makes
clean_live_states() and bpf_verifier_state->cleaned unnecessary.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-8-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The analysis is a basis for static liveness tracking mechanism
introduced by the next two commits.
A forward fixed-point analysis that tracks which frame's FP each
register value is derived from, and at what byte offset. This is
needed because a callee can receive a pointer to its caller's stack
frame (e.g. r1 = fp-16 at the call site), then do *(u64 *)(r1 + 0)
inside the callee — a cross-frame stack access that the callee's local
liveness must attribute to the caller's stack.
Each register holds an arg_track value from a three-level lattice:
- Precise {frame=N, off=[o1,o2,...]} — known frame index and
up to 4 concrete byte offsets
- Offset-imprecise {frame=N, off_cnt=0} — known frame, unknown offset
- Fully-imprecise {frame=ARG_IMPRECISE, mask=bitmask} — unknown frame,
mask says which frames might be involved
At CFG merge points the lattice moves toward imprecision (same
frame+offset stays precise, same frame different offsets merges offset
sets or becomes offset-imprecise, different frames become
fully-imprecise with OR'd bitmask).
The analysis also tracks spills/fills to the callee's own stack
(at_stack_in/out), so FP derived values spilled and reloaded.
This pass is run recursively per call site: when subprog A calls B
with specific FP-derived arguments, B is re-analyzed with those entry
args. The recursion follows analyze_subprog -> compute_subprog_args ->
(for each call insn) -> analyze_subprog. Subprogs that receive no
FP-derived args are skipped during recursion and analyzed
independently at depth 0.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-7-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Convert liveness bitmask type from u64 to spis_t, doubling the number
of trackable stack slots from 64 to 128 to support 4-byte granularity.
Each 8-byte SPI now maps to two consecutive 4-byte sub-slots in the
bitmask: spi*2 half and spi*2+1 half. In verifier.c,
check_stack_write_fixed_off() now reports 4-byte aligned writes of
4-byte writes as half-slot marks and 8-byte aligned 8-byte writes as
two slots. Similar logic applied in check_stack_read_fixed_off().
Queries (is_live_before) are not yet migrated to half-slot
granularity.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-4-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add helper functions for manipulating u64[2] bitmasks that represent
4-byte stack slot liveness. The 512-byte BPF stack is divided into
128 4-byte slots, requiring 128 bits (two u64s) to track.
These will be used by the static stack liveness analysis in the
next commit.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-3-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Subprogram name can be computed from function info and BTF, but it is
convenient to have the name readily available for logging purposes.
Update comment saying that bpf_subprog_info->start has to be the first
field, this is no longer true, relevant sites access .start field
by it's name.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-2-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Namely:
- bpf_subprog_is_global
- bpf_vlog_alignment
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-1-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Calvin reported an odd NMI watchdog lockup which claims that the CPU locked
up in user space. He provided a reproducer, which sets up a timerfd based
timer and then rearms it in a loop with an absolute expiry time of 1ns.
As the expiry time is in the past, the timer ends up as the first expiring
timer in the per CPU hrtimer base and the clockevent device is programmed
with the minimum delta value. If the machine is fast enough, this ends up
in a endless loop of programming the delta value to the minimum value
defined by the clock event device, before the timer interrupt can fire,
which starves the interrupt and consequently triggers the lockup detector
because the hrtimer callback of the lockup mechanism is never invoked.
As a first step to prevent this, avoid reprogramming the clock event device
when:
- a forced minimum delta event is pending
- the new expiry delta is less then or equal to the minimum delta
Thanks to Calvin for providing the reproducer and to Borislav for testing
and providing data from his Zen5 machine.
The problem is not limited to Zen5, but depending on the underlying
clock event device (e.g. TSC deadline timer on Intel) and the CPU speed
not necessarily observable.
This change serves only as the last resort and further changes will be made
to prevent this scenario earlier in the call chain as far as possible.
[ tglx: Updated to restore the old behaviour vs. !force and delta <= 0 and
fixed up the tick-broadcast handlers as pointed out by Borislav ]
Fixes: d316c57ff6bf ("[PATCH] clockevents: add core functionality")
Reported-by: Calvin Owens <calvin@wbinvd.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Calvin Owens <calvin@wbinvd.org>
Tested-by: Borislav Petkov <bp@alien8.de>
Link: https://lore.kernel.org/lkml/acMe-QZUel-bBYUh@mozart.vkv.me/
Link: https://patch.msgid.link/20260407083247.562657657@kernel.org
|
|
Now that scx_kfunc_context_filter enforces context-sensitive kfunc
restrictions at BPF load time, the per-task runtime enforcement via
scx_kf_mask is redundant. Remove it entirely:
- Delete enum scx_kf_mask, the kf_mask field on sched_ext_entity, and
the scx_kf_allow()/scx_kf_disallow()/scx_kf_allowed() helpers along
with the higher_bits()/highest_bit() helpers they used.
- Strip the @mask parameter (and the BUILD_BUG_ON checks) from the
SCX_CALL_OP[_RET]/SCX_CALL_OP_TASK[_RET]/SCX_CALL_OP_2TASKS_RET
macros and update every call site. Reflow call sites that were
wrapped only to fit the old 5-arg form and now collapse onto a single
line under ~100 cols.
- Remove the in-kfunc scx_kf_allowed() runtime checks from
scx_dsq_insert_preamble(), scx_dsq_move(), scx_bpf_dispatch_nr_slots(),
scx_bpf_dispatch_cancel(), scx_bpf_dsq_move_to_local___v2(),
scx_bpf_sub_dispatch(), scx_bpf_reenqueue_local(), and the per-call
guard inside select_cpu_from_kfunc().
scx_bpf_task_cgroup() and scx_kf_allowed_on_arg_tasks() were already
cleaned up in the "drop redundant rq-locked check" patch.
scx_kf_allowed_if_unlocked() was rewritten in the preceding "decouple"
patch. No further changes to those helpers here.
Co-developed-by: Juntong Deng <juntong.deng@outlook.com>
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
CIFS requires O_TMPFILE dentries to have names of newly created
delete-on-close files in the server so it can build full pathnames
from the root of the share when performing operations on them.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: David Howells <dhowells@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"The kernfs rbtree is keyed by (hash, ns, name) where the hash
is seeded with the raw namespace pointer via init_name_hash(ns).
The resulting hash values are exposed to userspace through
readdir seek positions, and the pointer-based ordering in
kernfs_name_compare() is observable through entry order.
Switch from raw pointers to ns_common::ns_id for both hashing
and comparison.
A preparatory commit first replaces all const void * namespace
parameters with const struct ns_common * throughout kernfs, sysfs,
and kobject so the code can access ns->ns_id. Also compare the
ns_id when hashes match in the rbtree to handle crafted collisions.
Also fix eventpoll RCU grace period issue and a cachefiles refcount
problem"
* tag 'vfs-7.0-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
kernfs: make directory seek namespace-aware
kernfs: use namespace id instead of pointer for hashing and comparison
kernfs: pass struct ns_common instead of const void * for namespace tags
eventpoll: defer struct eventpoll free to RCU grace period
cachefiles: fix incorrect dentry refcount in cachefiles_cull()
|
|
Add SDIO device ID (0x790a) for MediaTek MT7902 to sdio_ids.h.
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add a con_id parameter to skl_int3472_register_led() to allow callers
to specify both the LED name suffix and lookup con_id instead of
hardcoding "privacy". This prepares for registering additional LED
types with different names.
While at it, rename the privacy LED's GPIO con_id from "privacy-led"
to "privacy" in int3472_get_con_id_and_polarity() and pass it
directly to skl_int3472_register_led(), reducing churn when adding
new LED types.
No functional change.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Marco Nenciarini <mnencia@kcore.it>
Link: https://patch.msgid.link/20260401203638.1601661-4-mnencia@kcore.it
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Rename the privacy LED type, struct member, and functions from "pled"
to "led" in preparation for supporting additional LED types beyond
just the privacy LED.
No functional change.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Marco Nenciarini <mnencia@kcore.it>
Link: https://patch.msgid.link/20260401203638.1601661-3-mnencia@kcore.it
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
'for-next/ttbr-macros-cleanup', 'for-next/kselftest', 'for-next/feat_lsui', 'for-next/mpam', 'for-next/hotplug-batched-tlbi', 'for-next/bbml2-fixes', 'for-next/sysreg', 'for-next/generic-entry' and 'for-next/acpi', remote-tracking branches 'arm64/for-next/perf' and 'arm64/for-next/read-once' into for-next/core
* arm64/for-next/perf:
: Perf updates
perf/arm-cmn: Fix resource_size_t printk specifier in arm_cmn_init_dtc()
perf/arm-cmn: Fix incorrect error check for devm_ioremap()
perf: add NVIDIA Tegra410 C2C PMU
perf: add NVIDIA Tegra410 CPU Memory Latency PMU
perf/arm_cspmu: nvidia: Add Tegra410 PCIE-TGT PMU
perf/arm_cspmu: nvidia: Add Tegra410 PCIE PMU
perf/arm_cspmu: Add arm_cspmu_acpi_dev_get
perf/arm_cspmu: nvidia: Add Tegra410 UCF PMU
perf/arm_cspmu: nvidia: Rename doc to Tegra241
perf/arm-cmn: Stop claiming entire iomem region
arm64: cpufeature: Use pmuv3_implemented() function
arm64: cpufeature: Make PMUVer and PerfMon unsigned
KVM: arm64: Read PMUVer as unsigned
* arm64/for-next/read-once:
: Fixes for __READ_ONCE() with CONFIG_LTO=y
arm64, compiler-context-analysis: Permit alias analysis through __READ_ONCE() with CONFIG_LTO=y
arm64: Optimize __READ_ONCE() with CONFIG_LTO=y
* for-next/misc:
: Miscellaneous cleanups/fixes
arm64: rsi: use linear-map alias for realm config buffer
arm64: Kconfig: fix duplicate word in CMDLINE help text
arm64: mte: Skip TFSR_EL1 checks and barriers in synchronous tag check mode
arm64/hwcap: Generate the KERNEL_HWCAP_ definitions for the hwcaps
arm64: kexec: Remove duplicate allocation for trans_pgd
arm64: mm: Use generic enum pgtable_level
arm64: scs: Remove redundant save/restore of SCS SP on entry to/from EL0
arm64: remove ARCH_INLINE_*
* for-next/tlbflush:
: Refactor the arm64 TLB invalidation API and implementation
arm64: mm: __ptep_set_access_flags must hint correct TTL
arm64: mm: Provide level hint for flush_tlb_page()
arm64: mm: Wrap flush_tlb_page() around __do_flush_tlb_range()
arm64: mm: More flags for __flush_tlb_range()
arm64: mm: Refactor __flush_tlb_range() to take flags
arm64: mm: Refactor flush_tlb_page() to use __tlbi_level_asid()
arm64: mm: Simplify __flush_tlb_range_limit_excess()
arm64: mm: Simplify __TLBI_RANGE_NUM() macro
arm64: mm: Re-implement the __flush_tlb_range_op macro in C
arm64: mm: Inline __TLBI_VADDR_RANGE() into __tlbi_range()
arm64: mm: Push __TLBI_VADDR() into __tlbi_level()
arm64: mm: Implicitly invalidate user ASID based on TLBI operation
arm64: mm: Introduce a C wrapper for by-range TLB invalidation
arm64: mm: Re-implement the __tlbi_level macro as a C function
* for-next/ttbr-macros-cleanup:
: Cleanups of the TTBR1_* macros
arm64/mm: Directly use TTBRx_EL1_CnP
arm64/mm: Directly use TTBRx_EL1_ASID_MASK
arm64/mm: Describe TTBR1_BADDR_4852_OFFSET
* for-next/kselftest:
: arm64 kselftest updates
selftests/arm64: Implement cmpbr_sigill() to hwcap test
* for-next/feat_lsui:
: Futex support using FEAT_LSUI instructions to avoid toggling PAN
arm64: armv8_deprecated: Disable swp emulation when FEAT_LSUI present
arm64: Kconfig: Add support for LSUI
KVM: arm64: Use CAST instruction for swapping guest descriptor
arm64: futex: Support futex with FEAT_LSUI
arm64: futex: Refactor futex atomic operation
KVM: arm64: kselftest: set_id_regs: Add test for FEAT_LSUI
KVM: arm64: Expose FEAT_LSUI to guests
arm64: cpufeature: Add FEAT_LSUI
* for-next/mpam: (40 commits)
: Expose MPAM to user-space via resctrl:
: - Add architecture context-switch and hiding of the feature from KVM.
: - Add interface to allow MPAM to be exposed to user-space using resctrl.
: - Add errata workaoround for some existing platforms.
: - Add documentation for using MPAM and what shape of platforms can use resctrl
arm64: mpam: Add initial MPAM documentation
arm_mpam: Quirk CMN-650's CSU NRDY behaviour
arm_mpam: Add workaround for T241-MPAM-6
arm_mpam: Add workaround for T241-MPAM-4
arm_mpam: Add workaround for T241-MPAM-1
arm_mpam: Add quirk framework
arm_mpam: resctrl: Call resctrl_init() on platforms that can support resctrl
arm64: mpam: Select ARCH_HAS_CPU_RESCTRL
arm_mpam: resctrl: Add empty definitions for assorted resctrl functions
arm_mpam: resctrl: Update the rmid reallocation limit
arm_mpam: resctrl: Add resctrl_arch_rmid_read()
arm_mpam: resctrl: Allow resctrl to allocate monitors
arm_mpam: resctrl: Add support for csu counters
arm_mpam: resctrl: Add monitor initialisation and domain boilerplate
arm_mpam: resctrl: Add kunit test for control format conversions
arm_mpam: resctrl: Add support for 'MB' resource
arm_mpam: resctrl: Wait for cacheinfo to be ready
arm_mpam: resctrl: Add rmid index helpers
arm_mpam: resctrl: Convert to/from MPAMs fixed-point formats
arm_mpam: resctrl: Hide CDP emulation behind CONFIG_EXPERT
...
* for-next/hotplug-batched-tlbi:
: arm64/mm: Enable batched TLB flush in unmap_hotplug_range()
arm64/mm: Reject memory removal that splits a kernel leaf mapping
arm64/mm: Enable batched TLB flush in unmap_hotplug_range()
* for-next/bbml2-fixes:
: Fixes for realm guest and BBML2_NOABORT
arm64: mm: Remove pmd_sect() and pud_sect()
arm64: mm: Handle invalid large leaf mappings correctly
arm64: mm: Fix rodata=full block mapping support for realm guests
* for-next/sysreg:
: arm64 sysreg updates
arm64/sysreg: Update ID_AA64SMFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ZFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64FPFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ISAR2_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ISAR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update SMIDR_EL1 to DDI0601 2025-06
* for-next/generic-entry:
: More arm64 refactoring towards using the generic entry code
arm64: Check DAIF (and PMR) at task-switch time
arm64: entry: Use split preemption logic
arm64: entry: Use irqentry_{enter_from,exit_to}_kernel_mode()
arm64: entry: Consistently prefix arm64-specific wrappers
arm64: entry: Don't preempt with SError or Debug masked
entry: Split preemption from irqentry_exit_to_kernel_mode()
entry: Split kernel mode logic from irqentry_{enter,exit}()
entry: Move irqentry_enter() prototype later
entry: Remove local_irq_{enable,disable}_exit_to_user()
entry: Fix stale comment for irqentry_enter()
* for-next/acpi:
: arm64 ACPI updates
ACPI: AGDI: fix missing newline in error message
|
|
Add __regmap_init_i3c() and the corresponding regmap_init_i3c() macro to
allow creating a regmap for I3C devices without using the device-managed
version. This mirrors the pattern already established for other buses
such as I2C, SPI and so on, giving drivers more flexibility when
the regmap lifetime is not directly tied to the device.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://patch.msgid.link/a81256a8866b163979a20406abf01df7d7440104.1775788105.git.xiaopei01@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge power capping updates for 7.1-rc1:
- Clean up and rearrange the intel_rapl power capping driver to make
the respective interface drivers (TPMI, MSR, and MMOI) hold their
own settings and primitives and consolidate PL4 and PMU support
flags into rapl_defaults (Kuppuswamy Sathyanarayanan)
- Correct kernel-doc function parameter names in the power capping core
code (Randy Dunlap)
* pm-powercap:
powercap: intel_rapl: Consolidate PL4 and PMU support flags into rapl_defaults
powercap: intel_rapl: Move MSR primitives to MSR driver
thermal: intel: int340x: processor: Move MMIO primitives to MMIO driver
powercap: intel_rapl: Move TPMI primitives to TPMI driver
powercap: intel_rapl: Move primitive info to header for interface drivers
powercap: intel_rapl: Remove unused macro definitions
powercap: intel_rapl: Move MSR default settings into MSR interface driver
powercap: intel_rapl: Remove unused AVERAGE_POWER primitive
powercap: correct kernel-doc function parameter names
thermal: intel: int340x: processor: Move RAPL defaults to MMIO driver
powercap: intel_rapl: Move TPMI default settings into TPMI interface driver
powercap: intel_rapl: Allow interface drivers to configure rapl_defaults
powercap: intel_rapl: Use unit conversion macros from units.h
powercap: intel_rapl: Use GENMASK() and BIT() macros
powercap: intel_rapl: Use shifts for power-of-2 operations
powercap: intel_rapl: Simplify rapl_compute_time_window_atom()
powercap: intel_rapl: Remove unused TIME_WINDOW macros
powercap: intel_rapl: Cleanup coding style
powercap: intel_rapl: Add a symbol namespace for intel_rapl exports
|
|
Merge cpufreq updates for 7.1-rc1:
- Update qcom-hw DT bindings to include Eliza hardware (Abel Vesa)
- Update cpufreq-dt-platdev blocklist (Faruque Ansari)
- Minor updates to driver and dt-bindings for Tegra (Thierry Reding,
Rosen Penev)
- Add MAINTAINERS entry for CPPC driver (Viresh Kumar)
- Add support for new features: CPPC performance priority, Dynamic EPP,
Raw EPP, and new unit tests for them to amd-pstate (Gautham Shenoy,
Mario Limonciello)
- Fix sysfs files being present when HW missing and broken/outdated
documentation in the amd-pstate driver (Ninad Naik, Gautham Shenoy)
- Pass the policy to cpufreq_driver->adjust_perf() to avoid using
cpufreq_cpu_get() in the .adjust_perf() callback in amd-pstate which
leads to a scheduling-while-atomic bug (K Prateek Nayak)
- Clean up dead code in Kconfig for cpufreq (Julian Braha)
- Remove max_freq_req update for pre-existing cpufreq policy and add a
boost_freq_req QoS request to save the boost constraint instead of
overwriting the last scaling_max_freq constraint (Pierre Gondois)
- Embed cpufreq QoS freq_req objects in cpufreq policy so they all
are allocated in one go along with the policy to simplify lifetime
rules and avoid error handling issues (Viresh Kumar)
- Use DMI max speed when CPPC is unavailable in the acpi-cpufreq
scaling driver (Henry Tseng)
- Switch policy_is_shared() in cpufreq to using cpumask_nth() instead
of cpumask_weight() because the former is more efficient (Yury Norov)
- Use sysfs_emit() in sysfs show functions for cpufreq governor
attributes (Thorsten Blum)
- Update intel_pstate to stop returning an error when "off" is written
to its status sysfs attribute while the driver is already off (Fabio
De Francesco)
- Include current frequency in the debug message printed by
__cpufreq_driver_target() (Pengjie Zhang)
* pm-cpufreq: (38 commits)
cpufreq/amd-pstate: Add POWER_SUPPLY select for dynamic EPP
MAINTAINERS: amd-pstate: Step down as maintainer, add Prateek as reviewer
cpufreq: Pass the policy to cpufreq_driver->adjust_perf()
cpufreq/amd-pstate: Pass the policy to amd_pstate_update()
cpufreq/amd-pstate-ut: Add a unit test for raw EPP
cpufreq/amd-pstate: Add support for raw EPP writes
cpufreq/amd-pstate: Add support for platform profile class
cpufreq/amd-pstate: add kernel command line to override dynamic epp
cpufreq/amd-pstate: Add dynamic energy performance preference
Documentation: amd-pstate: fix dead links in the reference section
cpufreq/amd-pstate: Cache the max frequency in cpudata
Documentation/amd-pstate: Add documentation for amd_pstate_floor_{freq,count}
Documentation/amd-pstate: List amd_pstate_prefcore_ranking sysfs file
Documentation/amd-pstate: List amd_pstate_hw_prefcore sysfs file
amd-pstate-ut: Add a testcase to validate the visibility of driver attributes
amd-pstate-ut: Add module parameter to select testcases
amd-pstate: Introduce a tracepoint trace_amd_pstate_cppc_req2()
amd-pstate: Add sysfs support for floor_freq and floor_count
amd-pstate: Add support for CPPC_REQ2 and FLOOR_PERF
x86/cpufeatures: Add AMD CPPC Performance Priority feature.
...
|
|
Daniel Borkmann says:
====================
netkit: Support for io_uring zero-copy and AF_XDP
Containers use virtual netdevs to route traffic from a physical netdev
in the host namespace. They do not have access to the physical netdev
in the host and thus can't use memory providers or AF_XDP that require
reconfiguring/restarting queues in the physical netdev.
This patchset adds the concept of queue leasing to virtual netdevs that
allow containers to use memory providers and AF_XDP at native speed.
Leased queues are bound to a real queue in a physical netdev and act
as a proxy.
Memory providers and AF_XDP operations take an ifindex and queue id,
so containers would pass in an ifindex for a virtual netdev and a queue
id of a leased queue, which then gets proxied to the underlying real
queue.
We have implemented support for this concept in netkit and tested the
latter against Nvidia ConnectX-6 (mlx5) as well as Broadcom BCM957504
(bnxt_en) 100G NICs. For more details see the individual patches.
====================
Link: https://patch.msgid.link/20260402231031.447597-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a netdevice notifier in netkit to watch for NETDEV_UNREGISTER events.
If the target device is indeed NETREG_UNREGISTERING and previously leased
a queue to a netkit device, then collect the related netkit devices and
batch-unregister_netdevice_many() them.
If this were not done, then the netkit device would hold a reference on
the physical device preventing it from going away. However, in case of
both io_uring zero-copy as well as AF_XDP this situation is handled
gracefully and the allocated resources are torn down.
In the case where mentioned infra is used through netkit, the applications
have a reference on netkit, and netkit in turn holds a reference on the
physical device. In order to have netkit release the reference on the
physical device, we need such watcher to then unregister the netkit ones.
This is generally quite similar to the dependency handling in case of
tunnels (e.g. vxlan bound to a underlying netdev) where the tunnel device
gets removed along with the physical device.
# ip a
[...]
4: enp10s0f0np0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether e8:eb:d3:a3:43:f6 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.2/24 scope global enp10s0f0np0
valid_lft forever preferred_lft forever
[...]
8: nk@NONE: <BROADCAST,MULTICAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
[...]
# rmmod mlx5_ib
# rmmod mlx5_core
[...]
[ 309.261822] mlx5_core 0000:0a:00.0 mlx5_0: Port: 1 Link DOWN
[ 344.235236] mlx5_core 0000:0a:00.1: E-Switch: Unload vfs: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
[ 344.246948] mlx5_core 0000:0a:00.1: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
[ 344.463754] mlx5_core 0000:0a:00.1: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
[ 344.770155] mlx5_core 0000:0a:00.1: E-Switch: cleanup
[...]
# ip a
[...]
[ both enp10s0f0np0 and nk gone ]
[...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260402231031.447597-13-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement netdev_nl_queue_create_doit which creates a new rx queue in a
virtual netdev and then leases it to a rx queue in a physical netdev.
Example with ynl client:
# ynl --family netdev --output-json --do queue-create \
--json '{"ifindex": 8, "type": "rx", "lease": {"ifindex": 4, "queue": {"type": "rx", "id": 15}}}'
{'id': 1}
Note that the netdevice locking order is always from the virtual to
the physical device.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260402231031.447597-3-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
Short summary of fixes pull:
dma-buf:
- fence: fix docs for dma_fence_unlock_irqrestore()
fb-helper:
- unlock in error path
gem-shmem:
- fix PMD write update
gem-vram:
- remove obsolete documentation
ivpu:
- fix device-recovery handling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260409113921.GA181028@linux.fritz.box
|
|
Cross-merge networking fixes after downstream PR (net-7.0-rc8).
Conflicts:
net/ipv6/seg6_iptunnel.c
c3812651b522f ("seg6: separate dst_cache for input and output paths in seg6 lwtunnel")
78723a62b969a ("seg6: add per-route tunnel source address")
https://lore.kernel.org/adZhwtOYfo-0ImSa@sirena.org.uk
net/ipv4/icmp.c
fde29fd934932 ("ipv4: icmp: fix null-ptr-deref in icmp_build_probe()")
d98adfbdd5c01 ("ipv4: drop ipv6_stub usage and use direct function calls")
https://lore.kernel.org/adO3dccqnr6j-BL9@sirena.org.uk
Adjacent changes:
drivers/net/ethernet/stmicro/stmmac/chain_mode.c
51f4e090b9f8 ("net: stmmac: fix integer underflow in chain mode")
6b4286e05508 ("net: stmmac: rename STMMAC_GET_ENTRY() -> STMMAC_NEXT_ENTRY()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge ACPI core driver core driver updates and assorted driver updates
related to ACPI support for 7.1-rc1:
- Clean up the ACPI AC and ACPI PAD (processor aggregator device)
drivers (Rafael Wysocki)
- Rework checking for duplicate video bus devices and consolidate
pnp.bus_id workarounds handling in the ACPI video bus driver (Rafael
Wysocki)
- Update the ACPI core device drivers to stop setting acpi_device_name()
unnecessarily (Rafael Wysocki)
- Rearrange code using acpi_device_class() in the ACPI core device
drivers and update them to stop setting acpi_device_class()
unnecessarily (Rafael Wysocki)
- Define ACPI_AC_CLASS in one place (Rafael Wysocki)
- Convert the ni903x_wdt watchdog driver and the xen ACPI PAD driver to
bind to platform devices instead of ACPI devices (Rafael Wysocki)
* acpi-driver:
watchdog: ni903x_wdt: Convert to a platform driver
ACPI: PAD: xen: Convert to a platform driver
ACPI: AC: Define ACPI_AC_CLASS in one place
ACPI: driver: Do not set acpi_device_class() unnecessarily
ACPI: driver: Avoid |
