| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Per commit 9442490a0286 ("regmap: irq: Support wake IRQ mask inversion")
the wake_invert flag is to support enable register, so cleared bits are
wake disabled.
Fixes: 68622bdfefb9 ("regmap: irq: document mask/wake_invert flags")
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Link: https://patch.msgid.link/20251024082344.2188895-1-shawnguo2@yeah.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
regulator_unregister() already frees the associated GPIO device. On
ThinkPad X9 (Lunar Lake), this causes a double free issue that leads to
random failures when other drivers (typically Intel THC) attempt to
allocate interrupts. The root cause is that the reference count of the
pinctrl_intel_platform module unexpectedly drops to zero when this
driver defers its probe.
This behavior can also be reproduced by unloading the module directly.
Fix the issue by removing the redundant release of the GPIO device
during regulator unregistration.
Cc: stable@vger.kernel.org
Fixes: 1e5d088a52c2 ("platform/x86: int3472: Stop using devm_gpiod_get()")
Signed-off-by: Qiu Wenbo <qiuwenbo@kylinsec.com.cn>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://patch.msgid.link/20251028063009.289414-1-qiuwenbo@gnome.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
A race condition during gadget teardown can lead to a use-after-free
in usb_gadget_state_work(), as reported by KASAN:
BUG: KASAN: invalid-access in sysfs_notify+0x2c/0xd0
Workqueue: events usb_gadget_state_work
The fundamental race occurs because a concurrent event (e.g., an
interrupt) can call usb_gadget_set_state() and schedule gadget->work
at any time during the cleanup process in usb_del_gadget().
Commit 399a45e5237c ("usb: gadget: core: flush gadget workqueue after
device removal") attempted to fix this by moving flush_work() to after
device_del(). However, this does not fully solve the race, as a new
work item can still be scheduled *after* flush_work() completes but
before the gadget's memory is freed, leading to the same use-after-free.
This patch fixes the race condition robustly by introducing a 'teardown'
flag and a 'state_lock' spinlock to the usb_gadget struct. The flag is
set during cleanup in usb_del_gadget() *before* calling flush_work() to
prevent any new work from being scheduled once cleanup has commenced.
The scheduling site, usb_gadget_set_state(), now checks this flag under
the lock before queueing the work, thus safely closing the race window.
Fixes: 5702f75375aa9 ("usb: gadget: udc-core: move sysfs_notify() to a workqueue")
Cc: stable <stable@kernel.org>
Signed-off-by: Jimmy Hu <hhhuuu@google.com>
Link: https://patch.msgid.link/20251023054945.233861-1-hhhuuu@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A REQ_OP_OPEN_ZONE request changes the condition of a sequential zone of
a zoned block device to the explicitly open condition
(BLK_ZONE_COND_EXP_OPEN). As such, it should be considered a write
operation.
Change this operation code to be an odd number to reflect this. The
following operation numbers are changed to keep the numbering compact.
No problems were reported without this change as this operation has no
data. However, this unifies the zone operation to reflect that they
modify the device state and also allows strengthening checks in the
block layer, e.g. checking if this operation is not issued against a
read-only device.
Fixes: 6c1b1da58f8c ("block: add zone open, close and finish operations")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
REQ_OP_ZONE_RESET_ALL is a zone management request. Fix
op_is_zone_mgmt() to return true for that operation, like it already
does for REQ_OP_ZONE_RESET.
While no problems were reported without this fix, this change allows
strengthening checks in various block device drivers (scsi sd,
virtioblk, DM) where op_is_zone_mgmt() is used to verify that a zone
management command is not being issued to a regular block device.
Fixes: 6c1b1da58f8c ("block: add zone open, close and finish operations")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Merge series from Oleksij Rempel <o.rempel@pengutronix.de>:
This series adds input supply definitions for the NXP PCA9450 PMIC.
Some systems detect power events such as undervoltage before the PMIC.
To allow correct propagation of such events, each regulator must define
its upstream input supply. The first patch updates the devicetree
binding to document new *-supply properties, and the second patch adds
matching .supply_name entries in the driver.
Changes in this series:
- Document INL1, INB13, INB26 and INB45 supply properties
- Link all LDO and BUCK regulators to their corresponding input groups
|
|
Implement balance ID support for multiplane LAG configurations. This
feature enables per-multiplane group load balancing by extending the
software system image GUID with a balance ID component.
Key implementations:
- Enable lag_per_mp_group capability when supported by hardware.
- Append load_balance_id to software system image GUID when conditions
are met.
- Increase MLX5_SW_IMAGE_GUID_MAX_BYTES from 8 to 9 to accommodate the
extra byte.
The balance ID is appended to the system image GUID only when both
load_balance_id and lag_per_mp_group capabilities are available, ensuring
backward compatibility while enabling enhanced LAG functionality.
This enhancement allows for more granular load balancing control in complex
multi-plane LAG deployments, improving network performance and flexibility.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1761211020-925651-6-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Replace direct hardware system image GUID usage with a new software
system image GUID function that supports variable-length identifiers.
Key changes:
- Add mlx5_query_nic_sw_system_image_guid() function with length parameter.
- Update all callsites to use the new function and buffer/length approach.
- Modify mapping contexts to use byte arrays instead of u64 keys.
- Update devcom matching to support variable-length keys.
- Change mlx5_same_hw_devs() to use buffer comparison instead of u64.
This refactoring prepares the infrastructure for balance ID support,
which requires extending the system image GUID with additional data.
The change maintains backward compatibility while enabling future
enhancements.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1761211020-925651-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add the properties 'skew-delay-input-ps' and 'skew-delay-output-ps'
to the generic parameters used for parsing DT files. This allows to
specify the independent skew delay value for the two directions.
This enables drivers that use the generic pin configuration to get
the value passed through these new properties.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Allow a generic pinconf property to specify its argument as one of
the strings in a match list.
Convert the matching string to an integer value using the index in
the list, then keep using this value in the generic pinconf code.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Some KASAN builds are failing to properly optimize this code --
luckily we don't care about core quality for KASAN builds, so just
exclude it.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Closes: https://lore.kernel.org/oe-kbuild-all/202510251641.idrNXhv5-lkp@intel.com/
|
|
File dynptr reads may sleep when the requested folios are not in
the page cache. To avoid sleeping in non-sleepable contexts while still
supporting valid sleepable use, given that dynptrs are non-sleepable by
default, enable sleeping only when bpf_dynptr_from_file() is invoked
from a sleepable context.
This change:
* Introduces a sleepable constructor: bpf_dynptr_from_file_sleepable()
* Override non-sleepable constructor with sleepable if it's always
called in sleepable context
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251026203853.135105-10-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add the necessary verifier plumbing for the new file-backed dynptr type.
Introduce two kfuncs for its lifecycle management:
* bpf_dynptr_from_file() for initialization
* bpf_dynptr_file_discard() for destruction
Currently there is no mechanism for kfunc to release dynptr, this patch
add one:
* Dynptr release function sets meta->release_regno
* Call unmark_stack_slots_dynptr() if meta->release_regno is set and
dynptr ref_obj_id is set as well.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251026203853.135105-7-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Move struct freader and prototypes of the functions operating on it into
the buildid.h.
This allows reusing freader outside buildid, e.g. for file dynptr
support added later.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20251026203853.135105-4-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Dynptr currently caps size and offset at 24 bits, which isn’t sufficient
for file-backed use cases; even 32 bits can be limiting. Refactor dynptr
helpers/kfuncs to use 64-bit size and offset, ensuring consistency
across the APIs.
This change does not affect internals of xdp, skb or other dynptrs,
which continue to behave as before. Also it does not break binary
compatibility.
The widening enables large-file access support via dynptr, implemented
in the next patches.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251026203853.135105-3-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Having removed the use of the cpu_armpmu per-CPU variable from the
interrupt handling, the only user left is the BRBE scheduler hook.
It is easy to drop the use of this variable by following the pointer to the
generic PMU structure, and get the arm_pmu structure from there.
Perform the conversion and kill cpu_armpmu altogether.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-27-maz@kernel.org
|
|
There is no in-tree users of this helper since b13b41cc3dc18 ("misc:
ti_fpc202: Switch to of_fwnode_handle()"), and is replaced with
of_fwnode_handle().
Get rid of it.
Suggested-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-26-maz@kernel.org
|
|
These two helpers do not have any user anymore, and can be removed,
together with the affinity field kept in the irqdesc structure.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-25-maz@kernel.org
|
|
This code is now completely unused, and nobody will ever miss it.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-24-maz@kernel.org
|
|
Let the PMU driver request both NMIs and normal interrupts with an affinity mask
matching the PMU affinity.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-19-maz@kernel.org
|
|
While it would be nice to simply make request_percpu_irq() take an affinity
mask, the churn is likely to be on the irritating side given that most
drivers do not give a damn about affinities.
So take the more innocuous path to provide a helper that parallels
request_percpu_irq(), with an affinity as a bonus argument.
Yes, request_percpu_irq_affinity() is a bit of a mouthful.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-18-maz@kernel.org
|
|
Continue spreading the notion of affinity to the per CPU interrupt request
code by updating the call sites that use request_percpu_nmi() (all two of
them) to take an affinity pointer. This pointer is firmly NULL for now.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-16-maz@kernel.org
|
|
Add an affinity field to both the irqaction structure and the interrupt
request primitives. Nothing is making use of it yet, and the only value
used it NULL, which is used as a shorthand for cpu_possible_mask.
This will shortly get used with actual affinities.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-15-maz@kernel.org
|
|
When irqaction::percpu_dev_id was introduced, it was hoped that it could be
part of an anonymous union with dev_id, as the two fields are mutually
exclusive.
However, toolchains used at the time were often showing terrible support
for anonymous unions, breaking the build on a number of architectures. It
was therefore decided to keep the two fields separate and address this down
the line.
14 years later, the compiler dark age is over, and there is universal
support for anonymous unions. Get a whole pointer back that can immediately
be spent on something else.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-13-maz@kernel.org
|
|
There is no in-tree user of this flow handler anymore, so simply remove it.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-12-maz@kernel.org
|
|
Expand platform_get_irq_optional() to also return an affinity if available,
renaming it to platform_get_irq_affinity() in the process.
platform_get_irq_optional() is preserved with its current semantics by
calling into the new helper with a NULL affinity pointer.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20251020122944.3074811-5-maz@kernel.org
|
|
Plug the irq_populate_fwspec_info() helper into the OF layer to offer an
interrupt affinity reporting function.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20251020122944.3074811-4-maz@kernel.org
|
|
Plug the irq_populate_fwspec_info() helper into the ACPI layer to offer an
interrupt affinity reporting function. This is currently only supported for
the CONFIG_ACPI_GENERIC_GSI configurations, but could later be extended to
legacy architectures if necessary.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-3-maz@kernel.org
|
|
Add an irqdomain callback to report firmware-provided information that is
otherwise not available in a generic way. This is reported using a new data
structure (struct irq_fwspec_info).
This callback is optional and the only information that can be reported
currently is the affinity of an interrupt. However, the containing
structure is designed to be extensible, allowing other potentially relevant
information to be reported in the future.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20251020122944.3074811-2-maz@kernel.org
|
|
Currently, the code assumes that the device that registered the
MBQ register map is the actual SoundWire slave device. This works
fine for all current users, however future SDCA devices will
likely be implemented with the SoundWire slave as a parent device
and separate child drivers with regmaps for each audio Function.
Update the regmap_init_sdw_mbq_cfg macro to allow these two
to be specified separately.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add pci_epf_assign_bar_space() API to allow setting any MMIO address as
the BAR memory space, such as an MSI message base address.
This API also conforms to the BAR base address and size alignment
restrictions enforced by the PCI spec r6.0, sec 7.5.1.2.1.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[mani: removed unused epc var, reworded kdoc, comments and description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251015-vntb_msi_doorbell-v6-3-9230298b1910@nxp.com
|
|
Add a helper function to check if a PRM handler/module is present.
This can be used during init time by code that depends on a particular
handler. If the handler is not present, then the code does not need to
be loaded.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: "Mario Limonciello (AMD)" <superm1@kernel.org>
Acked-by: "Rafael J. Wysocki (Intel)" <rafael@kernel.org>
Link: https://patch.msgid.link/all/20251017-wip-atl-prm-v2-1-7ab1df4a5fbc@amd.com
|
|
Rename the member 'epf_bar::aligned_size' to 'epf_bar::mem_size' to better
reflect its purpose. 'aligned_size' was misleading, as it actually
represents the backing memory size allocated for the BAR rather than the
aligned size.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20251015-vntb_msi_doorbell-v6-1-9230298b1910@nxp.com
|
|
The IOMMU core attaches each device to a default domain on probe(). Then,
every new "attach" operation has a fundamental meaning of two-fold:
- detach from its currently attached (old) domain
- attach to a given new domain
Modern IOMMU drivers following this pattern usually want to clean up the
things related to the old domain, so they call iommu_get_domain_for_dev()
to fetch the old domain.
Pass in the old domain pointer from the core to drivers, aligning with the
set_dev_pasid op that does so already.
Ensure all low-level attach fcuntions in the core can forward the correct
old domain pointer. Thus, rework those functions as well.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Add support for PLLDSI and its post-dividers in the RZ/V2H CPG driver and
export helper APIs for use by the DSI driver.
Introduce per-PLL-DSI state in the CPG private structure and provide a
set of helper functions that find valid PLL parameter combinations for
a requested frequency. The new helpers are rzv2h_get_pll_pars(),
rzv2h_get_pll_div_pars(), rzv2h_get_pll_divs_pars() and
rzv2h_get_pll_dtable_pars() and they are exported in the "RZV2H_CPG"
namespace for use by other consumers (notably the DSI driver). These
helpers perform iterative searches over PLL parameters (M, K, P, S)
and optional post-dividers and return the best match (or an exact
match when possible).
Move PLL/CLK related limits and parameter types into the shared
include (include/linux/clk/renesas.h) by adding struct rzv2h_pll_limits,
struct rzv2h_pll_pars and struct rzv2h_pll_div_pars plus the
RZV2H_CPG_PLL_DSI_LIMITS() helper macro to define DSI PLL limits.
This change centralises the PLLDSI algorithms so the CPG and DSI
drivers compute PLL parameters consistently and allows the DSI driver
to accurately request rates and program its PLL.
Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251015192611.241920-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-next
Linux 6.18-rc3
|
|
We need the USB fixes in here as well to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the driver core fixes in here as well to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the fixes in here, and it resolves a merge conflict in:
drivers/misc/amd-sbi/Kconfig
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Before this patch during either switchdev or legacy mode enablement we
cleared the mac address of vports between changes. This change allows us
to preserve the vports mac address between eswitch mode changes.
Vports hold information for VFs/SFs such as the permanent mac address.
VF/SF mac can be set either by iproute vf interface or devlink function
interface. For no obvious reason we reset it to 0 on switchdev/legacy
mode changes, this patch is fixing that, to align with other vport
information that are never reset, e.g GUID,mtu,promisc mode, etc ..
Signed-off-by: Adithya Jayachandran <ajayachandra@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Acked-by: Leon Romanovsky <leon@kernel.org> # RDMA
|
|
Some drivers, e.g. stmmac, use the speed_up()/speed_down() APIs to
gain additional power saving during Wake-on-LAN where the PHY is
managing the state.
Add support to phylink for this, which can be enabled by the MAC
driver. Only change the PHY speed if the PHY is configured for
wake-up, but without any wake-up on the MAC side, as MAC side
means changing the configuration once the negotiation has
completed.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vBrR7-0000000BLza-2PjK@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add core phylink managed Wake-on-Lan support, which is enabled when the
MAC driver fills in the new .mac_wol_set() method that this commit
creates.
When this feature is disabled, phylink acts as it has in the past,
merely passing the ethtool WoL calls to phylib whenever a PHY exists.
No other new functionality provided by this commit is enabled.
When this feature is enabled, a more inteligent approach is used.
Phylink will first pass WoL options to the PHY, read them back, and
attempt to set any options that were not set at the PHY at the MAC.
Since we have PHY drivers that report they support WoL, and accept WoL
configuration even though they aren't wired up to be capable of waking
the system, we need a way to differentiate between PHYs that think
they support WoL and those which actually do. As PHY drivers do not
make use of the driver model's wake-up infrastructure, but could, we
use this to determine whether PHY drivers can participate. This gives
a path forward where, as MAC drivers are converted to this, it
encourages PHY drivers to also be converted.
Phylink will also ignore the mac_wol argument to phylink_suspend() as
it now knows the WoL state at the MAC.
MAC drivers are expected to record/configure the Wake-on-Lan state in
their .mac_set_wol() method, and deal appropriately with it in their
suspend/resume methods. The driver model provides assistance to set the
IRQ wake support which may assist driver authors in achieving the
necessary configuration.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vBrR2-0000000BLzU-1xYL@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add phy_may_wakeup() which uses the driver model's device_may_wakeup()
when the PHY driver has marked the device as wakeup capable in the
driver model, otherwise use phy_drv_wol_enabled().
Replace the sites that used to call phy_drv_wol_enabled() with this
as checking the driver model will be more efficient than checking the
WoL state.
Export phy_may_wakeup() so that phylink can use it.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vBrQx-0000000BLzO-1RLt@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add phy_can_wakeup() to report whether the PHY driver has marked the
PHY device as being wake-up capable as far as the driver model is
concerned.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vBrQs-0000000BLzI-0w3U@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are a few generic events that may only be used by modules. They are
defined and then set with EXPORT_TRACEPOINT*(). Mark events that are
exported as being used, even though they still waste memory in the kernel
proper.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas.schier@linux.dev>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/20251022004453.089254920@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
If a tracepoint is defined via DECLARE_TRACE() or TRACE_EVENT() but never
called (via the trace_<tracepoint>() function), its metadata is still
around in memory and not discarded.
When created via TRACE_EVENT() the situation is worse because the
TRACE_EVENT() creates metadata that can be around 5k per trace event.
Having unused trace events causes several thousand of wasted bytes.
Add a verifier that injects a string of the name of the tracepoint it
calls that is added to the discarded section "__tracepoint_check".
For every builtin tracepoint, its name (which is saved in the in-memory
section "__tracepoint_strings") will have its name also in the
"__tracepoint_check" section if it is used.
Add a new program that is run on build called tracepoint-update. This is
executed on the vmlinux.o before the __tracepoint_check section is
discarded (the section is discarded before vmlinux is created). This
program will create an array of each string in the __tracepoint_check
section and then sort it. Then it will walk the strings in the
__tracepoint_strings section and do a binary search to check if its name
is in the __tracepoint_check section. If it is not, then it is unused and
a warning is printed.
Note, this currently only handles tracepoints that are builtin and not in
modules.
Enabling this currently with a given config produces:
warning: tracepoint 'sched_move_numa' is unused.
warning: tracepoint 'sched_stick_numa' is unused.
warning: tracepoint 'sched_swap_numa' is unused.
warning: tracepoint 'pelt_hw_tp' is unused.
warning: tracepoint 'pelt_irq_tp' is unused.
warning: tracepoint 'rcu_preempt_task' is unused.
warning: tracepoint 'rcu_unlock_preempted_task' is unused.
warning: tracepoint 'xdp_bulk_tx' is unused.
warning: tracepoint 'xdp_redirect_map' is unused.
warning: tracepoint 'xdp_redirect_map_err' is unused.
warning: tracepoint 'vma_mas_szero' is unused.
warning: tracepoint 'vma_store' is unused.
warning: tracepoint 'hugepage_set_pmd' is unused.
warning: tracepoint 'hugepage_set_pud' is unused.
warning: tracepoint 'hugepage_update_pmd' is unused.
warning: tracepoint 'hugepage_update_pud' is unused.
warning: tracepoint 'block_rq_remap' is unused.
warning: tracepoint 'xhci_dbc_handle_event' is unused.
warning: tracepoint 'xhci_dbc_handle_transfer' is unused.
warning: tracepoint 'xhci_dbc_gadget_ep_queue' is unused.
warning: tracepoint 'xhci_dbc_alloc_request' is unused.
warning: tracepoint 'xhci_dbc_free_request' is unused.
warning: tracepoint 'xhci_dbc_queue_request' is unused.
warning: tracepoint 'xhci_dbc_giveback_request' is unused.
warning: tracepoint 'tcp_ao_wrong_maclen' is unused.
warning: tracepoint 'tcp_ao_mismatch' is unused.
warning: tracepoint 'tcp_ao_key_not_found' is unused.
warning: tracepoint 'tcp_ao_rnext_request' is unused.
warning: tracepoint 'tcp_ao_synack_no_key' is unused.
warning: tracepoint 'tcp_ao_snd_sne_update' is unused.
warning: tracepoint 'tcp_ao_rcv_sne_update' is unused.
Some of the above is totally unused but others are not used due to their
"trace_" functions being inside configs, in which case, the defined
tracepoints should also be inside those same configs. Others are
architecture specific but defined in generic code, where they should
either be moved to the architecture or be surrounded by #ifdef for the
architectures they are for.
This tool could be updated to process modules in the future.
I'd like to thank Mathieu Desnoyers for suggesting using strings instead
of pointers, as using pointers in vmlinux.o required handling relocations
and it required implementing almost a full feature linker to do so.
To enable this check, run the build with: make UT=1
Note, when all the existing unused tracepoints are removed from the build,
the "UT=1" will be removed and this will always be enabled when
tracepoints are configured to warn on any new tracepoints. The reason this
isn't always enabled now is because it will introduce a lot of warnings
for the current unused tracepoints, and all bisects would end at this
commit for those warnings.
Link: https://lore.kernel.org/all/20250528114549.4d8a5e03@gandalf.local.home/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas.schier@linux.dev>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/20251022004452.920728129@kernel.org
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> # for using strings instead of pointers
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
This old alias for in_hardirq() has been marked as deprecated since
2020; remove the stragglers.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251024180654.1691095-1-willy@infradead.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The main change this time is an update to the MAINTAINERS file,
listing Krzysztof Kozlowski, Alexandre Belloni, and Linus Walleij as
additional maintainers for the SoC tree, in order to go back to a
group maintainership. Drew Fustini joins as an additional reviewer for
the SoC tree.
Thanks to all of you for volunteering to help out.
On the actual bugfixes, we have a few correctness changes for firmware
drivers (qtee, arm-ffa, scmi) and two devicetree fixes for Raspberry
Pi"
* tag 'soc-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: officially expand maintainership team
firmware: arm_scmi: Fix premature SCMI_XFER_FLAG_IS_RAW clearing in raw mode
firmware: arm_scmi: Skip RAW initialization on failure
include: trace: Fix inflight count helper on failed initialization
firmware: arm_scmi: Account for failed debug initialization
ARM: dts: broadcom: rpi: Switch to V3D firmware clock
arm64: dts: broadcom: bcm2712: Define VGIC interrupt
firmware: arm_ffa: Add support for IMPDEF value in the memory access descriptor
tee: QCOMTEE should depend on ARCH_QCOM
tee: qcom: return -EFAULT instead of -EINVAL if copy_from_user() fails
tee: qcom: prevent potential off by one read
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix regressions in regmap cache initialization in gpio-104-idio-16
and gpio-pci-idio-16
- configure first 16 GPIO lines of the IDIO-16 as fixed outputs
- fix duplicated IRQ mapping that can lead to an RCU stall in gpio-ljca
- fix printf formatters passed to dev_err() and make failure to set
debounce period non fatal
* tag 'gpio-fixes-for-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: ljca: Fix duplicated IRQ mapping
gpiolib: acpi: Use %pe when passing an error pointer to dev_err()
gpiolib: acpi: Make set debounce errors non fatal
gpio: idio-16: Define fixed direction of the GPIO lines
gpio: regmap: add the .fixed_direction_output configuration parameter
gpio: pci-idio-16: Define maximum valid register address offset
gpio: 104-idio-16: Define maximum valid register address offset
|
|
The current expansion of kbps_to_icc() introduces unnecessary logic
when compiled from a general expression. Rewriting it allows compilers
to emit shorter and more efficient code across architectures.
For example, with gcc -O2:
arm64:
old:
tst x0, 7
add w1, w0, 7
cset w2, ne
cmp w0, 0
csel w0, w1, w0, lt
add w0, w2, w0, asr 3
new:
add w1, w0, 14
adds w0, w0, 7
csel w0, w1, w0, mi
asr w0, w0, 3
x86-64:
old:
xor eax, eax
test dil, 7
lea edx, [rdi+7]
setne al
test edi, edi
cmovns edx, edi
sar edx, 3
add eax, edx
new:
lea eax, [rdi+14]
add edi, 7
cmovns eax, edi
sar eax, 3
In both cases the old form relies on extra test and compare
instructions (tst, test, cmp) combined with conditional moves or sets,
while the new form uses fewer instructions by folding the addition and
flag update together (adds on arm64, add on x86).
This reduces the instruction sequence, prevents multiple evaluations of
x when it is an expression or a function call, and keeps the macro
simpler.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Link: https://lore.kernel.org/r/20250930043055.2200322-1-visitorckw@gmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
