| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Ingo Molnar:
- Revert a commit to spinlock cleanup guards that got caught up
in the subtle limitations & fragility of guards (again...) and
caused a regression (Peter Zijlstra)
* tag 'locking-urgent-2026-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking: Revert switching guards to _irq_{disable,enable}()
|
|
Pull more drm updates from Dave Airlie:
"As mentioned last week, an msm pull request fell down the side of the
couch or whatever the email equivalent of that is. This has the msm
next stuff + the usual fixes for amd/intel.
core:
- use drm_warn instead of warn
msm:
- Bindings:
- Added Shikra support
- Document a840, a704, a722
- Core:
- Use drm_client buffers for fbdev emulation
- teardown fixes
- ARM32 DMA fixup
- Remove objects from evict list when re-validated
- Bunch of corner case and error path fixes
- DPU:
- Dropped dev_pm_opp_set_rate(0) preventing burnout
- Fixed SSPP offsets of Kaanapali
- DP:
- Dropped dev_pm_opp_set_rate(0) preventing burnout
- Cleaned up core code in preparation for MST support
- Fixed prepare() to let Pipewire continue in case of the unplugged cable
- GPU:
- Add support for a704
- Add support for a722
- HDMI:
- Simplifed register access
amdgpu:
- eGPU fixes
- Runtime PM fix
- UserQ fixes
- Backlight fix
- Discovery sysfs fix
- Reset handling fixes
- Buffer func handling fix for xgmi
- VCN boundary check fix
- DC lut handling fixes
- MES fixes
- UVD fix
- VCE 3 fix
- Enforce isolation fix
- HPD fix for VGA/LVDS
- DML fix
- DCN 6 fixes
- DC gpu reset fix
amdkfd:
- Fix return value
- CU occupancy for GFX 11
- CU occupancy for GFX 12/12.1
- Queue bounds checking fix
- SVM fixes
- CRIU bounds checking fix
radeon:
- iMac display fix
xe:
- error message cleanups
- i2c global register definitions as dependency for xe/i2c fixes
- Media workardound
- Add CCS to gt_idle debugfs print
- Page fault related fix
- i2c related fixes
- System Controller mailbox bit fix"
* tag 'drm-next-2026-08-29' of https://gitlab.freedesktop.org/drm/kernel: (121 commits)
drm/xe/sysctrl: Read mailbox phase bit from hardware
drm/xe/i2c: Keep the i2c controller always enabled
drm/xe/i2c: Fix the interrupt handling
i2c: designware: Global register definitions
drm/xe: Reject page faults from non-fault-mode scratch VMs
drm/xe/xe_gt_idle: Add CCS to the powergating info print
drm/xe: Do not apply WA 14025883347 to media 3503
drm/amd/display: fix dc_lock leak on GPU reset error paths
drm/amd/display: Fix redundant GPUVMEnable checks in dcn6 flip schedule
drm/amd/display: Fix wrong bytes-per-pixel value for dml2_422_packed_10
drm/amdkfd: guard against NULL restore_mqd in CRIU queue restore
drm/amdgpu/userq: fix lock missing for userq fence error set
drm/amdkfd: Fix the case that vm range is hole at svm_migrate_copy_to_vram
drm/amdkfd: Fix error path at svm_migrate_copy_to_ram
drm/amd/display: Log details when failing to register HPD IRQ
drm/amd/display: Fix HPD consideration for VGA/LVDS connectors on DCE
drm/amdgpu: clamp the isolation index for rings outside a partition
drm/amdkfd: Reject zero-sized AQL queue allocations after size halving
drm/amdgpu: Fix VCE 3 ring align_mask
drm/kfd: Add CU occupancy support to GFX12.1
...
|
|
Pull ceph updates from Ilya Dryomov:
"A wide variety of mostly CephFS fixes and cleanups, split between
changes that address edge cases (Sam, Xiubo, Matthew), efficiency
improvements (Max) and AI-assisted hardening (Michael, Jeremy).
One thing that stands out is Alex's change to how CephFS behaves in
NEARFULL scenarios: the long-standing "make all writes synchronous"
behavior has become opt-in. It was always somewhat controversial and
doesn't make much sense for modern deployments; the new default is to
continue normal operation (i.e. buffer writes as MDS allows, etc). The
behavior in case the cluster reaches any FULL state remains the same
as before"
* tag 'ceph-for-7.3-rc1' of https://github.com/ceph/ceph-client: (32 commits)
ceph: force a cap message when a deferred revoke can't be acked immediately
libceph: reject buckets with mismatched CRUSH ids
ceph: reject export_targets ranks >= CEPH_MAX_MDS in mdsmap decode
ceph: fix leaked inode reference on writeback abort at umount
libceph: remove ceph_put_page_vector()
libceph: validate banner payload length
ceph: make nearfull sync writes opt-in
ceph: do not repeat ceph_trim_dentries() if no progress possible
ceph: drop mdsc->mutex before decoding the MDS reply
ceph: fix UAF in check_new_map() on session freed during unlock
ceph: fix UAF in __kick_flushing_caps() on cf entry freed during unlock
ceph: pass inode pointer around instead of reloading it
ceph: mark cap remove with RB_CLEAR_NODE() instead of setting ci=NULL
ceph: add helper function ceph_cap_is_removed()
ceph: make __ceph_remove_cap() static
ceph: cap delegated inode count in ceph_parse_deleg_inos()
ceph: bound num_export_targets array for mds info v2/v3
ceph: bound MDSCapAuth path and fs_name decode in handle_session()
ceph: bound xattr value length in __build_xattrs()
ceph: bound copied dentry name length in NFS export get_name
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull TPM updates from Jarkko Sakkinen:
"The bulk of this is Ross Philipson's TPM enablement for Trenchboot.
That exposes TPM constants, and decouple and improve robustness of
tpm_buf a bit in order to implement a minimal early TPM driver.
Early boot code will call either SKINIT on AMD or GETSEC[SENTER] on
Intel before jumping into kernel's entry point. They re-initalize TPM
PCRs but leave up to the early boot code measure initrd, boot_params
and Trenchboot associated metadata.
The motivation here is just that we would want in future iterations of
the series put our full focus to the x86 part of the review, and call
it a day as per TPM changes. Further, even if Trenchboot turned out to
be empty lottery the worst possible outcome for TPM driver is that
things get cleaned up a bit"
* tag 'for-next-tpm-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm-buf: Add TPM buffer support header for standalone reuse
tpm-buf: Memory-safe allocations
tpm-buf: Remove chip parameter from tpm_buf_append_handle()
tpm-buf: Merge TPM_BUF_BOUNDARY_ERROR and TPM_BUF_OVERFLOW
tpm: Remove main TPM header from TPM event log header
tpm: Move platform specific definitions to the new PTP header
tpm: Move TPM common base definitions to the command header
tpm: Move TPM2 specific definitions to the command header
tpm: Move TPM1 specific definitions to the command header
tpm: Initial step to reorganize TPM public headers
tpm: st33zp24: Validate locality read result
tpm: st33zp24: Return zero on status read failure
tpm: tpm_tis_spi: fix nodef CR50 tpm_tis_spi_resume is null
tpm: atmel: depend on X86
tpm: Remove redundant dev_err()
tpm: tpm_i2c_nuvoton: disable IRQ on wait timeout
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, IPSec and Netfilter.
Current release - fix to a fix:
- netfilter: ipset: remove need to allocate memory on delete operations
Current release - regressions:
- macb: drop CONFIG_OF #if block, fix build
Previous releases - always broken:
- stream of fixes for SCTP continues
- inet: frags: strip GSO state from fragments before reassembly
- virtio-net: ensure that TCP packets don't overflow gso_segs
- tcp-ao: fix use-after-free of current_key on reconnect to another
peer
- page_pool: remove zone/policy GFP flags when allocating XArray
entries
- Bluetooth: L2CAP: reject accept queue add unless BT_LISTEN
- tls: device: fix out-of-bounds write in tls_append_frag()
- eth: bnxt:
- ring the doorbell when SW USO exits early, avoid packets stuck
in Tx
- gate TPH enablement behind BNXT_SUPPORTS_QUEUE_API check, avoid
users of older NICs seeing non-actionable warning messages
- eth: qede: fix NULL pointer dereference in TPA fragment processing"
* tag 'net-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (216 commits)
inet: frags: strip GSO state from fragments before reassembly
net/sched: sch_htb: limit htb_classify inner-class filter hops
selftests/net: packetdrill: add tcp_urg_ptr_retransmit
tcp: fix corruption of urgent data on multi-segment retransmit
usb: atm: usbatm: fix invalid ci_range initialization
net: fec: only stop PTP if it was initialized
slip: remove slip_hangup() to fix use-after-free in slip_receive_buf()
net: bridge: mcast: fix use-after-free of a master VLAN's multicast context
net/sched: bound qdisc_pkt_len to prevent qdisc soft lockup
net: dsa: mxl862xx: enable assisted learning on CPU port
net: stmmac: restore NET_IP_ALIGN in the RX DMA offset
net: stmmac: drop gso_enabled_types and rely on netdev features
net: stmmac: selftests: Don't test flow control for small rx fifos
net: stmmac: selftests: Account for the UC filter list for filtering tests
net: stmmac: dwxgmac: Account for the primary MAC address for UC filtering
net: stmmac: dwmac4: Account for the primary MAC address for UC filtering
net: stmmac: dwmac1000: Account for the primary MAC address for UC filtering
net: stmmac: selftests: Check multiple MMC counters
selftests: net: Fix slow configurations in big_tcp_tunnels.sh
selftests: net: Lower threshold with csum offload off in big_tcp_tunnels.sh
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"New Support & Features:
- Core: Extend netdev trigger speeds up to 100G
- PWM Multicolor: Introduce default-intensity property
- Analog Devices LTC3220: Add support for 18 channel LED driver
- NXP PCA963x: Add multicolor LED class support
Improvements & Fixes:
- GPIO: Clear error pointers for skipped LEDs
- Broadcom BCM63138: Use %pe to print pinctrl error instead of %ld
- ISSI IS31FL319x: Modernize device registration by using fwnode APIs
- NXP PCA9532: Fix inverted GPIO output polarity
- NXP PCA9532: Fix phantom device registration on missing hardware
- STMicroelectronics ST1202: Correct and extend hw_pattern
documentation
- STMicroelectronics ST1202: Fix channel disable logic on zero
brightness and ensure brightness changes are applied in active mode
- STMicroelectronics ST1202: Fix hardware pattern sequence
programming, validate inputs, and correct pattern duration
calculations
- STMicroelectronics ST1202: Validate LED reg property against
channel count
- TI LP5860: Fix a potential double-unlock during device
initialization and fix error handling path by using
devm_mutex_init()
Cleanups & Refactoring:
- GPIO: Make legacy gpiolib interface optional
Device Tree Binding Updates:
- Core: Add default-intensity property
- Core: Document "gpio" trigger
- Analog Devices LTC3220: Add DT binding for LTC3220 18 channel LED
driver
- Broadcom BCM6358: Convert to DT schema
- LaCie NS2: Convert to DT schema
- NXP PCA963x: Add multicolor LED support
- NXP PCA963x: Fix reg maximum for pca9635
- TI TPS65217: Convert backlight bindings to DT schema"
* tag 'leds-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (29 commits)
leds: is31fl319x: Modernize registration
dt-bindings: leds: lacie,ns2-leds: Convert to DT schema
leds: pca963x: Add multicolor LED class support
dt-bindings: leds: nxp,pca963x: Add multicolor LED support
dt-bindings: leds: nxp,pca963x: Fix reg maximum for pca9635
leds: gpio: Clear error pointers for skipped LEDs
dt-bindings: leds: backlight: Convert TPS65217 to DT schema
leds: pca9532: Fix phantom device registration on missing hardware
leds: gpio: Make legacy gpiolib interface optional
leds: bcm63138: Use %pe to print pinctrl error instead of %ld
dt-bindings: leds: Add default-intensity property
leds: ltc3220: Add Support for LTC3220 18 channel LED Driver
dt-bindings: leds: Add LTC3220 18 channel LED Driver
dt-bindings: leds: bcm6358: Convert to DT schema
dt-bindings: leds: Document "gpio" trigger
leds: st1202: Correct and extend hw_pattern documentation
leds: st1202: Validate LED reg property against channel count
leds: st1202: Disable channel when brightness is set to zero
leds: st1202: Fix brightness having no effect while pattern mode is active
leds: st1202: Fix spurious pattern sequence start in setup
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Support & Features:
- MediaTek MT6397: Add mt6323 AUXADC support
- MediaTek MT6397: Add mt6323 EFUSE support
- Spreadtrum SC27xx: Add SC2730 regulator cell
Improvements & Fixes:
- Apple SMC: Fix key count endianness annotation
- Azoteq IQS62x: Reject zero-length firmware records
- ChromeOS EC: Introduce cros_ec_read_features helper and read
features during probe to catch transfer errors
- Cirrus Logic CS42L43: Fix regmap defaults ordering
- Cirrus Logic CS42L43: Remove redundant NULL checks on SoundWire
- Congatec Board Controller: Fix teardown ordering in cgbc_remove()
- HP iPAQ Micro: Fix out-of-bounds stack read in ipaq_micro_str
- Marvell 88PM886: Initialize the battery page
- QNAP MCU: Keep the reply buffer alive past a command timeout
- RAVE SP: Validate received frame payload lengths
- Silicon Labs Si476x: Drop duplicate NULL checks
- Silicon Labs Si476x: Modernize GPIO handling
- Silicon Motion SM501: Fix potential memory leaks during remove
- UCB1x00: Convert Assabet gpio-keys to use software nodes and
register software node for GPIO controller
- Viperboard: Fix native fields type in structures as little-endian
- Viperboard: Remove redundant NULL check before kfree()
- X-Powers AXP20x: Preserve other control bits when powering off
Cleanups & Refactoring:
- Core: Drop unused assignment of spi_device_id driver data
- Core: Initialize spi_device_id arrays using member names
- Core: Unify style of spi_device_id arrays
- Maintainers: Add Intel LPSS section to follow the changes
- Maintainers: Add a mailing list entry to MFD
- Cirrus Logic CS42L43: Format sdw_device_id table
- Cirrus Logic CS42L43: Use new SoundWire enumeration helper
- ROHM PMIC: Factor out power button registration and convert
gpio-keys to use software nodes
- ST-Ericsson DB8500: Fold dbx500 header into db8500
Device Tree Binding Updates:
- Core: Add techvision vendor prefix
- Marvell 88PM886: Allow vbus regulator
- MediaTek MT8195 SCP: Add support for MT8189 SoC
- Qualcomm SPMI PMIC: Document PMG1110
- Qualcomm SPMI PMIC: Document haptics device
- Qualcomm TCSR: Add compatible for Hawi and Maili SoCs
- Qualcomm TCSR: Add compatible for Shikra
- Qualcomm TCSR: Document the IPQ9650 TCSR block
- STMicroelectronics STMPE: Fix typo st,stmpe601 (should be
st,stmpe610)
- Syscon: Add ESWIN EIC7700 compatible
- Syscon: Allow syscon compatible for Loongson-2K0300 chip id
- Syscon: Disallow simple-bus with syscon
- Syscon: Drop custom select for older dtschema
- TI OMAP USBHS TLL: Convert to DT schema"
* tag 'mfd-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits)
mfd: cs42l43: Fix regmap defaults ordering
dt-bindings: mfd: syscon: Allow syscon compatible for Loongson-2K0300 chip id
dt-bindings: mfd: syscon: Add ESWIN EIC7700 compatible
mfd: qnap-mcu: keep the reply buffer alive past a command timeout
dt-bindings: mfd: qcom,tcsr: Document the IPQ9650 TCSR block
mfd: macsmc: Fix key count endianness annotation
dt-bindings: mfd: qcom,spmi-pmic: Document haptics device
mfd: iqs62x: Reject zero-length firmware records
mfd: rave-sp: validate received frame payload lengths
mfd: sm501: Fix potential memory leaks during remove
mfd: viperboard: Fix native fields type in structures as little-endian
mfd: si476x-i2c: Get rid of duplicate NULL checks
dt-bindings: mfd: Convert OMAP USB TLL to DT schema
mfd: cgbc: Fix teardown ordering in cgbc_remove()
mfd: mt6397-core: Add mt6323 AUXADC support
dt-bindings: mfd: qcom,tcsr: Add compatible for Hawi and Maili SoCs
mfd: rohm: Factor out power button registration
mfd: ucb1x00: Convert Assabet gpio-keys to use software nodes
mfd: ucb1x00: Register software node for GPIO controller
mfd: cs42l43: Tidy up formatting on sdw_device_id table
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "mm/rmap: index MAP_PRIVATE file-backed folios by anonymous pgoff"
(Lorenzo Stoakes)
Index MAP_PRIVATE file-backed folios by their anonymous page offset
to resolve confusion around reverse mapping for zeroed and CoW'd
file-backed memory.
Use this new VMA anonymous page offset tracking to eliminate index
conflicts and lay the foundation for scalable CoW performance
improvements.
- "promote mapped executable folios after first usage for MGLRU"
(Baolin Wang)
Make MGLRU's protection of mapped executable file folios more
reliable. Follow the classical LRU's logic, promoting mapped
executable file folios after their first usage to give executable
code a better chance to stay in memory and improve workload
performance.
- "mm: vmscan: fix node reclaim ignoring swappiness parameter" (Ridong
Chen)
Fix per-node proactive reclaim interface's ignoring the swappiness
parameter when CONFIG_MEMCG is disabled by consolidating
sc_swappiness() into a single function that checks
proactive_swappiness regardless of kernel configuration.
- "mm/vmscan: reduce lru_lock contention via vmstat-derived
scan-balance cost" (Usama Arif)
Reduce lru_lock contention in the reclaim path by deriving
scan-balance costs from vmstat counters rather than lock-acquired
producer updates.
Read and decay these cost signals on the reclaim side under a
dedicated per-lruvec lock, reducing total LRU lock wait time by over
60% without impacting scan throughput.
- "zram: fix zram issues reported by sashiko" (Sergey Senozhatsky)
Fix two low-risk zram bugs which Sashiko spotted in drive-by review.
- "Honor XA_FLAGS_ACCOUNT in xas_split_alloc() and charge to folio's
memcg" (Zi Yan)
Fix xas_split_alloc() by enabling target folio memcg charging during
splits and adding the missing __GFP_ACCOUNT flag for proper XArray
node memory accounting.
- "selftests/mm: use pattern matching in .gitignore" (Pratyush Mallick)
Replace hardcoded binary names in selftests/mm/.gitignore with a
generic pattern-matching rule to automatically ignore generated test
files and avoid manual updates when adding new tests.
- "mm/page_ext: remove pgdat_page_ext_init()" (Sang-Heon Jeon)
Make the incompatibility between FLATMEM and NUMA explicit in
mm/Kconfig and remove the unused pgdat_page_ext_init() function.
- "zram: fix zstd error paths and add parameter validation" (Haoqin
Huang)
Clean up zram compression backends by removing redundant error
cleanup, adding parameter and dictionary validation, auto-prefixing
algorithm error logs, and resetting parameters prior to
reinitialization.
- "zram: fix stale scan bounds after reinitialization" (Longlong Xia)
Prevent out-of-bounds slot accesses during concurrent zram resets by
moving table scan bound calculations under dev_lock in
writeback_store() and read_block_state().
- "add anon mTHP collapse test cases" (Baolin Wang)
Extend selftests helper functions to support arbitrary page orders
and add new test cases and options for mTHP collapse in khugepaged.
- "selftests/mm: Handle unsupported and transient test conditions"
(Muhammad Usama Anjum)
Update MM selftests to report a SKIP status instead of a failure when
required kernel or filesystem features are unsupported, while adding
retry logic for transient page migration errors.
- "mm/zswap: Fixes and improves the zswap shrink" (Hao Jia)
Fix the missing zswap global shrinker when CONFIG_MEMCG is disabled
and extend shrink_memcg() to support batch writeback for improved
writeback efficiency.
- "alloc_tag: introduce IOCTL-based filtering for MAP" (Suren
Baghdasaryan)
Introduce an IOCTL-based binary interface for memory allocation
profiling that enables kernel-side filtering before per-CPU counter
aggregation.
This eliminates the text-parsing overhead of /proc/allocinfo and
provides up to a 20x speedup by transferring only filtered allocation
data to userspace.
- "better block swap batching and a different take on swap_ops v5"
(Christoph Hellwig)
Refactor block swap I/O to use swap_iocb for batching instead of
single-bio requests and rebase the swap_ops interface, achieving
faster swap throughput during kernel builds.
- "mm: kmemleak: reduce transient false positives by confirming leaks"
(Catalin Marinas)
Reduce false-positive kmemleak reports by combining two kmemleak
enhancements that add a second confirmation scan and a configurable
minimum unreferenced scan count module parameter.
- "mm: kmemleak: default min_unref_scans to 2 for verbose kernels"
(Breno Leitao)
Auto-scanning kernels can generate false-positive memory leak reports
on single scans, so this patch defaults min_unref_scans to 2 when
CONFIG_DEBUG_KMEMLEAK_VERBOSE is enabled to require a second
confirming scan.
- "swap_ops updates" (Christoph Hellwig)
Batching I/O for synchronous swap devices causes performance
regressions and filesystem-based swap suffers from double-indirection
overhead. This series resolves both issues by reintroducing per-folio
writes for synchronous swap and allowing filesystems to directly
export their own swap_ops.
- "mm/khugepaged: several cleanups" (Nico Pache)
khugepaged accumulated redundant state-checking patterns and outdated
comments following mTHP integration. Introduce dedicated helpers for
PTE validation and event counting while refreshing the internal
documentation.
- "maple_tree: lock checking and clean ups" (Liam Howlett)
Syzbot reports incorrectly blame memory management exit paths for
locking bugs, maple tree erase operations risk allocation failures
without gfp flags and internal documentation lacks clarity.
Improve lock error detection, update docs, fix race and allocation
edge cases and optimize erase allocations using a fallback to
GFP_KERNEL | GFP_NOFAIL.
* tag 'mm-stable-2026-08-26-15-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (172 commits)
selftests/proc: make proc-maps-race work with READ_IMPLIES_EXEC
memcg: move LRU size accounting on reparenting instead of copying it
mm/vmscan: fix comment logic in balance_pgdat
maple_tree: add helper mas_make_walkable()
maple_tree: avoid extra gap calculation
maple_tree: fix argument name in header
maple_tree: change two GFP flags in tests
maple_tree: document erase and allocations better
maple_tree: avoid mas_erase() and mtree_erase() failures
maple_tree: document that erase may use GFP_KERNEL for allocations
maple_tree: catch race in mas_alloc_cyclic()
maple_tree: add bulk parent set helper
maple_tree: micro optimisation of mas_wr_store_type()
maple_tree: optimise mas_wr_node_store() when not in rcu mode
maple_tree: use prefetched value in mas_wr_store_type()
maple_tree: clarify comments on mas_nomem()
maple_tree: drop MAPLE_ALLOC_SLOTS
maple_tree: drop dead code from mas_extend_spanning_null()
maple_tree: documentation fix
maple_tree: add write lock checking with lockdep sequence numbers
...
|
|
Moving the register definitions to a global header file
include/linux/designware_i2c.h. That removes the need to
duplicate them in the adaptation layers for this driver
outside of drivers/i2c/busses/. There is at least one of
those in drivers/gpu/drm/xe/xe_i2c.c.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Suggested-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://patch.msgid.link/20260811121008.1493015-2-heikki.krogerus@linux.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 2ab2fb31411a494e4579dfacda986a2672f80e65)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The user can specify any gso_size in a packet crafted with an AF_PACKET
PACKET_VNET_HDR socket, even smaller than TCP_MIN_GSO_SIZE = 8. At the
same time, GSO_MAX_SIZE = 8 * GSO_MAX_SEGS = 8 * 65535. When the user
crafts a packet with gso_size < 8, there is a risk for partial GSO to
overflow the 16-bit gso_segs field when dividing the SKB length by
gso_size.
Adjust gso_size of TCP packets to be at least TCP_MIN_GSO_SIZE = 8. Keep
gso_size of UDP GSO packets, as gso_size=1 is valid and explicitly
tested at tools/testing/selftests/net/tun.c:649.
Fixes: 7c6d2ecbda83 ("net: be more gentle about silly gso requests coming from user")
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260822120117.1163423-2-alice.kernel@fastmail.im
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Decrypt netvsc buffer on contiguous direct-map addresses (Kameron
Carr)
- Drop WS2012/2012R2 & Win8/8.1 Hyper-V support (Michael Kelley)
- Use more meaningful errnos for hypercall status code (Hardik Garg)
- Fix lost interrupts on CPU hot-unplug for Hyper-V PCI/MSI (Naman
Jain)
- Reserve more MSHV vectors for Linux root partition (Wei Liu)
* tag 'hyperv-next-signed-20260826' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
clocksource: hyper-v: Remove support for stimer interrupts in message mode
scsi: storvsc: Remove support for storvsc protocol of old Hyper-V hosts
hv_netvsc: Remove GPADL teardown special case for old Hyper-V hosts
hv_sock: Remove check for old Hyper-V hosts
Drivers: hv: Remove support for WS2012/2012R2 & Win8/8.1 version of Hyper-V
hv_netvsc: Allocate send/receive buffers using vmbus_alloc_buffer()
Drivers: hv: vmbus: Add vmbus_alloc_buffer()/vmbus_free_buffer() for CoCo VMs
Drivers: hv: vmbus: add vmbus_establish_gpadl_caller_decrypted()
Drivers: hv: vmbus: Skip VMBus module cleanup for non-nested root partition
x86/hyperv: reserve more vectors
PCI: hv: Set irq_retrigger callback for the Hyper-V PCI MSI irqchip
Drivers: hv: Use meaningful errnos for hypercall status codes
|
|
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable fixes:
- Use-after-free fixes for the sunrpc client code
- Delegation hash table leak
- NULL dereference on lockowner allocation failure
- Fix a handshake completion race in the TLS code
- Fix an error sign checking issue when deciding whether the pNFS
layout is still in use, or can be returned
- Fix a layout segment leak in pnfs_layout_process()
Other bugfixes:
- Fix a missing NULL check in the rpcbind client
- annotate shared socket callbacks with READ_ONCE/WRITE_ONCE
- nfs_inode_set_delegation() error paths should return the delegation
- Use clear_and_wake_up_bit() in nfs_clear_invalid_mapping() and the
pNFS code.
- Fix the nfs4_alloc_client() error paths to free the IDR allocation
- fix folio dereference before NULL check in
nfs_inode_remove_request()
- Fix delayed delegation return
- Fix another state manager race with umount
- Fix device leaks on parse failure
- Avoid cancelling in-flight I/O during a layout recall if the server
doesn't require it
- flexfiles: report cancelled I/O as a layout error
- flexfiles: fix NULL dereference for NFSv4.0 data servers
- Fix incorrect argument passed to nfs4_delete_lease()
- Fix several symlink issues resulting from nfs_atomic_open_v23()
- Fix an uninitialised variable issue in the NFSv4.1 callback code
- fix LAYOUTSTATS send buffer exhaustion
Features and cleanups:
- NFSv4.2: Allow the server to specify that file data may not be cached
- localio: optimise I/O submission when when not doing memory reclaim
- localio: Remove duplicate wait code in nfs_local_commit
- flexfiles: support loosely coupled NFSv4.x data servers
- pNFS: key the data server cache on the NFS version"
* tag 'nfs-for-7.3-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (33 commits)
NFSv4.1: fix layout segment leak on the pnfs_layout_process() forget path
NFSv4/pnfs: key the data server cache on the NFS version
NFSv4.2: fix LAYOUTSTATS send buffer exhaustion
pNFS: Fix EBUSY check in pnfs_layout_need_return
NFSv4.1: zero referring call lists before decoding
nfs: fix ENXIO on O_CREAT open of existing symlink over NFSv3
SUNRPC: wait for in-flight client TLS handshake callback
NFSv4: Fix incorrect argument passed to nfs4_delete_lease() in nfs4_add_lease()
lockd: fix NULL dereference on lockowner allocation failure
NFS: fix delegation_hash_table leak when nfs4_server_common_setup() fails
NFSv4/flexfiles: support loosely coupled data servers
NFSv4/flexfiles: fix NULL dereference for NFSv4.0 data servers
NFSv4: pin the superblock for active state owners
sunrpc: fix use-after-free in __rpc_clnt_handle_event and __rpc_clnt_remove_pipedir
NFS/localio: issue commit inline when not in a memory-reclaim context
NFS/localio: remove dead FLUSH_SYNC handling from nfs_local_commit
NFS/localio: issue IO inline when not in a memory-reclaim context
NFS: Fix delayed delegation return list handling
NFS: Verify symlink inode before caching target
NFS: fix folio dereference before NULL check in nfs_inode_remove_request()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"This mostly consists of assorted updates of thermal drivers, including
new hardware support (Airoha AN7583, Qualcomm Master BandGap thermal
monitor, QCom PMIC5 Gen3 ADC), but it also includes two reverts of
recent cosmetic thermal core updates that went against driver core
plans to eliminate class_create():
- Fix missing bitfield include headers in Armada and QCom SPM BMG
drivers (Daniel Lezcano)
- Fix missed file when manually applying a change after a conflict
resolution for the QCom SPMI ADC TM5 Gen3 (Daniel Lezcano)
- Move thermal_zone_device_enable() to the right place in order to
prevent calling it if the thermal zone registration failed (Dan
Carpenter)
- Improve bitfield manipulations on Armada (Bryan B. Lima)
- Remove unneeded 'fast_io' on Sun8i and Armada (Wolfram Sang)
- Fix wrong boundary when clamping the low values in the set_trips()
callback and fix wrong mask when setting the temperature interval
on Airoha (Christian Marangi)
- Make use of the regmap API to support Airoha AN7583 (Christian
Marangi)
- Fix adc_tm5_get_temp() return check value on the QCom SPMI ADC
sensor (Rakesh Kota)
- Fix unbalanced clock enablement when the resume fails on the iMX
driver (Can Peng)
- Add Qualcomm Master BandGap thermal monitor support (Satya Priya
Kakitapalli)
- Add Maili Temperature bindings compatible (Haritha S K)
- Add a devm action to clean hardware interrupts, sampling, and
control registers on Spacemit K1 (Pei Xiao)
- Fix trivial typo in a thermal OF code comment (Marek Vasut)
- Remove unnecessary print on Qcom SPMI ADC driver when a call to
devm_request_threaded_irq() fails as this one already prints a
message (Jishnu Prakash)
- Add support for QCom PMIC5 Gen3 ADC by using auxiliary driver and
shared interrupt with the IIO driver (Jishnu Prakash)
- Make resets optional on MT8196 and add the corresponding property
in the DT bindings (AngeloGioacchino Del Regno)
- Fix clock staying enabled on failing resume operation on Qoriq (Can
Peng)
- Fix wrong closing brace position in thermal library header (Andreas
Haufler)
- Fix low and high trip point validation by moving the check after
the clamp on the spacemit driver (surendra)
- Remove redundant error messages on IRQ request failure (Pan Chuang)
- Add IIO_CONSUMER namespace import to the qcom-spmi-mbg-tm thermal
driver to avoid modpost warnings that would appear after merging
the iio tree against the thermal updates (Nathan Chancellor)
- Revert two recent cosmetic updates of the thermal core conflicting
with driver core plans to eliminate class_create() (Rafael
Wysocki)"
* tag 'thermal-7.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
thermal/drivers/qcom-spmi-mbg-tm: Add module namespace import for IIO_CONSUMER
Revert "thermal/core: Allocate the thermal class dynamically"
Revert "thermal/core: Use the thermal class pointer as init guard"
thermal/drivers/armada: Fix missing bitfields include
thermal/drivers/qcom/spm mbg tm: Fix missing bitfield header
thermal/drivers/qcom: Fix missing spmi adc tm5 gen3 file
thermal/drivers: Remove redundant error messages on IRQ request failure
thermal/drivers/spacemit: Validate clamped trip thresholds
tools/lib/thermal: Fix misplaced extern "C" closing brace
thermal/drivers/qoriq: Disable clock on resume failure
thermal/drivers/mediatek/lvts_thermal: Make reset optional for MT8196
dt-bindings: thermal: mediatek: Make resets optional for MT8196
thermal/drivers/qcom: add support for PMIC5 Gen3 ADC thermal monitoring
iio: adc: qcom-spmi-adc5-gen3: Share SDAM0 IRQ with ADC_TM auxiliary driver
iio: adc: qcom-spmi-adc5-gen3: Remove an unnecessary print
thermal/of: Fix trivial enabled typo
thermal/drivers/spacemit/k1: Add shutdown action and reorder registration order
dt-bindings: thermal: qcom-tsens: Document the Maili Temperature Sensor
thermal/drivers/qcom: Add support for Qualcomm MBG thermal monitoring
dt-bindings: thermal: Add Qualcomm MBG thermal monitor support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Mostly the usual clk driver updates and new SoC additions plus
non-critical data fixes for things that weren't used yet.
One thing that's new here in the core is SSC spread spectrum support
(SSC) in the clk provider API. The idea is that DT authors will
configure SSC for certain clks and they'll be configured at clk
provider registration time or when a consumer device is probed,
similar to how we handle assigned clk rates or parents.
On the clk driver side we have Qualcomm adding almost half the diff
because they add support for 4 different SoCs and then a long tail of
other SoCs like Mediatek, Renesas, Rockchip, SpaceMiT, etc. add more
SoC support this time around. Luckily it's mostly clk data for these
new SoCs because the actual clk_ops are already there. Beyond the new
drivers we get all the little fixups for more compilation coverage or
usage of more modern APIs. That all looks normal.
Finally, I kinda buried the lede, I'm bringing on Brian and Jerome to
help out with maintaining the clk subsystem. The current working model
is already semi-distributed in that silicon vendors typically take
care of their drivers and send me pull requests but I'm becoming a
bottleneck for new drivers and core framework review because this has
become a 100% volunteer effort on my part.
Mike is stepping down after all these years (thanks Mike!) and that
jump started the conversation around finding co-maintainers. Brian and
Jerome have graciously offered to help me with the work load, meaning
in the future they'll be sending pull requests and committing directly
to the clk.git tree. They've both been around on the list for a while,
I've met them both in person, and they've been making changes to the
core clk framework along with helping review patches so I'm pretty
confident this will work well.
Core:
- devm_clk_bulk_get_enable() consumer API
- devm_clk_hw_register_composite_pdata() provider API
- Spread Spectrum Clock (SSC) support via DT bindings and provider APIs
- Divider clk rounding improved (and tested)
New Drivers:
- Cix Sky1 audio subsystem (AUDSS)
- UltraRISC DP1000
- MediaTek MT8173 MFG_TOP
- Si549
- Aspeed AST2700 PECI
- Airoha EN7523 PCIe
- Rockchip RV1106
- Mobileye EyeQ7H
- Qualcomm Maili GCC, TCSR, RPMh, and video clks
- Qualcomm Shikra GCC, RPM, GPU, display, and audio clks
- Qualcomm Nord display and graphics clks
- Qualcomm Glymur camera and EVA clks
- Qualcomm Hawi video clks
- Amlogic A9 AO and peripheral clks
- Renesas R-Car X5H (R8A78000) CPG"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (269 commits)
clk: microchip: mpfs: fix regmap_update_bits() mask/val order
clk: visconti: Make sure clk_init_data is fully initialized
clk: ti: Make sure clk_init_data is fully initialized
MAINTAINERS: Add Brian Masney and Jerome Brunet as co-maintainers for clk subsystem
Drop Michael Turquette's clk maintainer entry
clk: ti: composite: resolve parent clocks by DT index, not by name
clk: ti: mux: resolve parent clocks by DT index, not by name
clk: devres: fix cleanup in devm_clk_get_optional_enabled_with_rate()
dt-bindings: clock: ti,keystone-gate: Convert to DT schema
dt-bindings: clock: ti: Convert APLL clock to DT schema
clk: zynq: pll: Fix kernel-doc after determine_rate() conversion
dt-bindings: clock: ti,clockdomain: Convert to DT schema
dt-bindings: clock: Correct white-space style
clk: samsung: Don't include <linux/mod_devicetable.h>
clk: at91: Read "reg" with helper
clk: renesas: Add R-Car X5H CPG driver
clk: rockchip: rk3576: fix source muxes for SPI0..SPI4
clk: rockchip: Add clock controller for the RV1106
dt-bindings: clock: rockchip: Add RV1106 CRU support
dt-bindings: clock: Document Renesas R-Car X5H Clock Pulse Generator
...
|
|
ceph_put_page_vector() was paired with ceph_get_direct_page_vector(),
which was removed in commit 97a385e55829 ("libceph: remove
ceph_get_direct_page_vector()"). Its only remaining caller,
finish_netfs_read(), uses it to put a page vector allocated with
iov_iter_get_pages_alloc2(), which is confusing. Open-code the
put_page() loop and kvfree() there instead.
The caller passed dirty = false, so this also removes the dead dirty
branch and with it a call to the deprecated set_page_dirty_lock().
Signed-off-by: Tal Zussman <tz2294@columbia.edu>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull another power sequencing update from Bartosz Golaszewski:
"A single tree-wide rename of two of the public functions to better
reflect their actual semantics:
- rename pwrseq_power_on/off() to pwrseq_enable/disable() tree-wide"
* tag 'pwrseq-updates-for-v7.3-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: rename pwrseq_power_on/off() to pwrseq_enable/disable()
|
|
The way power sequencing works means that a call to pwrseq_power_on()
does not necessarily result in the pwrseq target being powered-on at
that time: it may have already been powered on before. Similarly: a call
to pwrseq_power_off() does not have to result in an actual powering off
of resources: there may still be other users that requested a power-on
before.
We will also introduce the concept of "non-controllable" pwrseq targets
soon which further increases the disconnect between the naming
convention and the actual semantics.
What consumers of pwrseq descriptors actually do is: they *vote* for a
powering on of a given target or retract that vote. These operations
could be called get/put in line with runtime PM but this could become
confusing since we already provide pwrseq_get/put() for a different
purpose. pwrseq_vote_on/off() also have been rejected as unusual in
the tree.
Change the name of the two functions to pwrseq_enable/disable() which
better reflects their purpose and semantics and also mirrors other
enable-counted resources like regulators and clocks. No functional change
intended.
If at any point users need to know *when* the exact power event happens,
we can provide that information in the form of a notifier.
Acked-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Acked-by: Alessio Belle <alessio.belle@imgtec.com> # imagination
Link: https://patch.msgid.link/20260731-pwrseq-vote-rename-v3-1-44e60b8be053@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"Add a remoteproc driver and binding for AMD MicroBlaze/V soft cores
executing from dual-port BRAM, with clock and reset control and
support for firmware without a resource table.
Introduce a generic Qualcomm PAS service with SCM and OP-TEE backends,
and migrate the PAS, MSS, and WCNSS remoteproc drivers to it. Add Nord
ADSP and CDSP support, Eliza CDSP support, Maili ADSP/CDSP bindings,
and late-attach SoCCP support for Kaanapali, Hawi, Maili, and Glymur.
Enable BAM-DMUX child devices for PAS modems and fix PAS memory
protection, handover, shutdown, and resource lifetime handling.
Harden remoteproc lifecycle handling by attaching asynchronously,
stopping crashed processors, synchronizing crash work with removal,
and forcing shutdown before device resources are released. Reallocate
resources during attach recovery and fix several reference and
error-path leaks.
Add Xilinx R5 crash detection and move RPU start and stop sequencing
into the platform firmware driver. Consolidate write-combining
carveout mapping callbacks, use correct I/O-memory accessors, and
share optional ELF resource-table handling across drivers.
Convert the TI Wakeup M3 binding to DT schema, correct Qualcomm and
generic remoteproc bindings, and harden resource-table iteration
against signed-offset out-of-bounds accesses"
* tag 'rproc-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (60 commits)
remoteproc: fix OOB read via signed offset in rsc_table_for_each_entry()
remoteproc: replace BSD blurb with SPDX identifier in rsc_table.h
remoteproc: replace BSD blurb with SPDX identifier in remoteproc.h
remoteproc: fix coding style issues in remoteproc.h
MAINTAINERS: add rsc_table.h to remoteproc entry
remoteproc: qcom: pas: Add Nord ADSP and CDSP support
dt-bindings: remoteproc: qcom,nord-pas: Document Nord PAS
remoteproc: qcom: pas: Drop unused dtb_mem_region field
remoteproc: qcom: pas: Map/unmap subsystem region before auth_and_reset
remoteproc: qcom: pas: Fix the PAS context creation placement
remoteproc: qcom: pas: Guard dtb metadata release with dtb_pas_id check
remoteproc: qcom: annotate mem_region fields with __iomem
arm64: dts: qcom: eliza: Add fallback compatible for ADSP remoteproc
dt-bindings: remoteproc: qcom,milos-pas: Move Eliza ADSP to SM8550 schema
remoteproc: qcom: pas: Add Eliza CDSP support
dt-bindings: remoteproc: qcom,sm8550-pas: Add Eliza CDSP compatible
remoteproc: qcom: q6v5: Request shutdown if crash is triggered host-side
remoteproc: Force shutdown during device removal
remoteproc: Prevent crash handling to race with rproc_del()
remoteproc: Allow shutdown of crashed processors
...
|
|
Pull kvm updates from Paolo Bonzini:
"ARM64:
- Add support for 'slot' based PMU events, paired with new UAPI that
compels the user to select a specific PMU implementation
- Lazy save/restore of vCPU state for pKVM, along with various fixes
and cleanups to the management of vCPU state between the untrusted
host and pKVM hypervisor
- Disable traps of EL1 registers for nested hypervisors when
FEAT_NV2p1 is present, guaranteeing that EL2-specific register bits
are stateful in the EL1 counterpart
- Leverage FEAT_NV3 to avoid unnecessary ERET/TLBI traps when the
scope of those instructions remains 'in host' (i.e. L1
kernel/userspace)
- Pile of fixes for the management of the VNCR pseudo-TLB, such as
under-invalidations and races with concurrent TLBIs on other vCPUs
- Consolidate the non-protected and pKVM view of ICH_VTR_EL2 to a
runtime-patched constant, allowing the same data to be shared with
pKVM prior to dropping host privileges
- Considerable pile of LLM-assisted fixes around the shop but mostly
in the VGIC, our in-kernel generator of bugs (and sometimes
interrupts)
LoongArch:
- Advertise already-supported capabilities
- Some bug fixes about timer and MMIO
- Some hardening about interrupt injection
- Replace kvm_err() with kvm_pr_unimpl()
- Add FPU/LSX/LASX test cases for selftests
RISC-V:
- Svadu/Zicfiss/Zicfilp FWFT support for Guest
- Use try_cmpxchg for IMSIC MRIF RMW
- More arch-specific tracepoints in KVM RISC-V
- Eager page splitting when enabling dirty logging
- Optimize hfence request handling for SMP Guests
- Improve dirty log clearing by skipping zero bits in mask
- Guard HFENCE range loops against overflow
- CPU PM notifiers in KVM RISC-V for non-retentive idle states
- Fix kernel-mode vector context save/restore for Guest
s390:
- Fixes for vfio-ap
- Fixes for the gmap rework
- Fixes for vsie
- AI triggered fixes all over
- diag9c tracing
- code move preparation for the additional arm64 support
- enable CONTEXT_ANALYSIS
x86:
- Perform spring cleaning on x86.{c,h} and asm/kvm_host.h, by adding
regs.c (the kvm_cache_regs.h => regs.h is already applied) and
msrs.{c,h}, and moving relevant code out of x86.c
- Split kvm_mmu in three parts, respectively to describe the format
of page tables, walking the guest page tables and building the page
tables. Always use the same page table walker kvm->arch.gva_walk as
the entry point to convert a guest's virtual address, where the
previous code used two different kvm_mmu structs depending on
whether the walk included nested EPT/NPT or not. Make page fault
vmexits reuse the permission checking machinery that is used for
guest page faults. This is both a cleanup and a baby step towards
supporting XS/XU memory permissions
- Document some of the "fun" gotchas with the APIC base when creating
IRQCHIPs on x86
- Remove a defunct masterclock update from kvm_xen_shared_info_init().
It could result in incorrect kvmclock due to triggering an
unnecessary switch to/from masterclock mode
- Skip Xen runstate time updates if time has effectively gone
backwards, so that the guest doesn't report 100% steal time for
a very, very long time
- Drop KVM's runtime updates of the Xen PV timing CPUID leaf, as KVM
was updating the wrong sub-leaf, and upstream KVM will soon provide
all the information needed by userspace to populate the CPUID field
itself
- Fix a bug where KVM would walk a newly created rmap without holding
the rmap lock (or mmu_lock) during aging
- Fix a bug where aging TDP MMU SPTEs could clobber FROZEN SPTEs
- Fix a variety of #DB priority bugs
- Fix a class of races related to enabling Hyper-V emulation on a
vCPU after the vCPU is visible to the rest of KVM
- Use static calls for nested virtualization ops
- Move more KVM-internal code out of x86's kvm_host.h
- Enumerate support for a variety of Zhaoxin instructions that don't
require explicit virtualization
- Fix missing EFER validation bugs, including in the KVM_SET_SREGS*
path
- Harden kvm_vcpu_map() against double-mapping and thus leaking
references
- Misc fixes and cleanups, e.g. for largely benign syzkaller splats
x86 (Intel):
- Zero a vCPU's entry in VMX's Posted Interrupt Descriptor table used
for IPI virtualization when the vCPU is freed, to fix a
use-after-free where hardware will write to a freed vCPU's PID
- Service local TLB flushes on a failed nested VM-Enter to fix a bug
where KVM could miss a TLB on a future, successful VM-Enter with
the same L2 VPID
- Cap the maximum value shoved into the VMX Preemption Timer to
workaround an erratum that affects all existing Intel CPUs that
support CPUID 0x15
- Fix VPID virtualization bugs where KVM would fail to flush hardware
TLBs
- Harden the TDX "populate" ioctls against bad input, and to prepare
for supporting in-place private<=>shared conversion
x86 (AMD):
- Forcefully invalidate SNP VMSA pages if their backing guest_memfd
page is zapped/invalidated, e.g. due to a PUNCH_HOLE in response to
a Page-State Change request
- Remove a dying VM from the GA Log notifier list before the VM is
actually destroyed, to fix a potential use-after-free
- While FOLL_WRITE was needed in the past to trigger CoW unsharing,
nowadays FOLL_LONGTERM does that already even without FOLL_WRITE,
and in fact, get_user_pages() actually disallows FOLL_WRITE
together with FOLL_LONGTERM. So don't pass FOLL_WRITE when
registering encrypted memory regions, i.e. when pinning SEV/SEV-ES
guest memory, to fix a regression with file-backed memory
introduced by KVM's (correct) usage of long-term pins
(This was reviewed by mm maintainers; for more information, see
commit ee1a586dd1fa "KVM: SEV: Drop FOLL_WRITE for encrypted region
registration")
- Allocate full pages for SEV/SEV-ES {DE,EN}CRYPT ops on SNP-enabled
hosts to fix a data corruption issue due to the PSP driver
assigning to-be-written pages to firmware (as required by the SNP
specs)
- Unconditionally intercept ICBEP so that KVM generates the correct
guest RIP when handling an ICEBP-induced TASK_SWITCH #VMEXIT
- Harden the SNP "populate" ioctls against bad input, and to prepare
for supporting in-place private<=>shared conversion
Generic:
- Remove kvm_debugfs_dir if kvm_init() fails after creating KVM's
debugfs
- Add a per-VM bitmap to track which vCPU IDs have been "claimed" but
for which the vCPU isn't yet online, and use the bitmap to reject
duplicate IDs before calling into arch code. This allows arch code
to consume vcpu_id without having to worry about cross-vCPU
clobbering (at least s390 and x86 have had related bugs)
- Rework the so called "prepare" and "invalidate" guest_memfd hooks
to prepare for in-place private<=>shared conversion, and clean up a
few warts along the way
Selftests:
- Automatically allocate a full page for L2 guest stacks on x86
instead of requiring test-specific L1 guest code to carve out a
portion of the L1 stack for L2 usage, and to ensure the L2 stack
also adheres to the x86-64 calling convention ABI
- Add a selftest to verify {Guest,Host}-Only behavior in x86's
mediated PMU
- Clean up nested SVM's han |
