| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The SMBus block transfer length data->block[0] is validated in
i2c_smbus_xfer_emulated() but that check runs too late for tracepoints
and is skipped entirely when the adapter provides a native smbus_xfer
implementation. This allows user-controlled oversized block lengths to
reach tracepoint memcpy calls and driver callbacks unchecked.
Add an early validation in __i2c_smbus_xfer() that rejects block
transfers whose caller-supplied length is zero or exceeds
I2C_SMBUS_BLOCK_MAX before any tracepoint fires or driver callback
runs. data->block[0] is filled in by the device on SMBus block reads,
so the check is scoped to operations where the length is actually
supplied by the caller. This is consistent with the existing -EINVAL
convention in the emulated path and protects all downstream consumers
at once: the smbus_write tracepoint, all native smbus_xfer driver
implementations, and the emulated path.
Two distinct bugs are fixed by this change:
Bug 1: smbus_write tracepoint OOB (include/trace/events/smbus.h)
trace_smbus_write() fires before any validation and copies
data->block[0]+1 bytes into a 34-byte event buffer. With
block[0]=0xfe the tracepoint copies 255 bytes, overflowing by 221.
BUG: KASAN: stack-out-of-bounds in trace_event_raw_event_smbus_write+0x27c/0x530
Read of size 255 at addr ffff88800d98fcf8 by task poc_smbus/91
Call Trace:
<TASK>
__asan_memcpy+0x23/0x80
trace_event_raw_event_smbus_write+0x27c/0x530
__i2c_smbus_xfer+0x43a/0xa40
i2c_smbus_xfer+0x19e/0x340
i2cdev_ioctl_smbus+0x38f/0x7f0
i2cdev_ioctl+0x35e/0x680
__x64_sys_ioctl+0x147/0x1e0
do_syscall_64+0xcf/0x15a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Bug 2: i2c-stub I2C_SMBUS_I2C_BLOCK_DATA OOB (drivers/i2c/i2c-stub.c)
stub_xfer() implements .smbus_xfer directly and only clamps
block[0] against 256-command, not I2C_SMBUS_BLOCK_MAX. With
block[0]=0xff and command=0 the loop accesses block[1+i] for
i up to 254, far past the 34-byte union.
UBSAN: array-index-out-of-bounds in drivers/i2c/i2c-stub.c:223:44
index 34 is out of range for type '__u8 [34]'
Call Trace:
<TASK>
__ubsan_handle_out_of_bounds+0xd7/0x120
stub_xfer+0x1971/0x198f [i2c_stub]
__i2c_smbus_xfer+0x306/0xa40
i2c_smbus_xfer+0x19e/0x340
i2cdev_ioctl_smbus+0x38f/0x7f0
i2cdev_ioctl+0x35e/0x680
__x64_sys_ioctl+0x147/0x1e0
do_syscall_64+0xcf/0x15a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Both traces reproduced on v7.0-rc6+i2c/for-current with KASAN+UBSAN.
Fixes: 8a325997d95d ("i2c: Add message transfer tracepoints for SMBUS [ver #2]")
Fixes: 4710317891e4 ("i2c-stub: Implement I2C block support")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
bochs_pci_probe() allocates the DRM device with devm_drm_dev_alloc(),
which registers a devres action to drop the initial DRM device reference
on driver detach or probe failure.
The error path currently calls drm_dev_put() manually. If probe then
returns an error, devres will run the registered release action and put
the same device again, after the first put may already have released it.
Return the probe error directly and let devres own the final put.
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Fixes: 04826f588682 ("drm/bochs: Allocate DRM device in struct bochs_device")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260424123506.32275-1-mhun512@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome-platform fix from Tzung-Bi Shih:
- Fix a NULL dereference in cros_ec_typec
* tag 'chrome-platform-fixes-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_typec: Init mutex in Thunderbolt registration
|
|
In gmac_rx() (drivers/net/ethernet/cortina/gemini.c), when
gmac_get_queue_page() returns NULL for the second page of a multi-page
fragment, the driver logs an error and continues — but does not free the
partially assembled skb that was being assembled via napi_build_skb() /
napi_get_frags().
Free the in-progress partially assembled skb via napi_free_frags()
and increase the number of dropped frames appropriately
and assign the skb pointer NULL to make sure it is not lingering
around, matching the pattern already used elsewhere in the driver.
Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Signed-off-by: Andreas Haarmann-Thiemann <eitschman@nebelreich.de>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260505-gemini-ethernet-fix-v2-1-997c31d06079@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
of_get_child_by_name() takes a reference. The rtsn_reset() and
rtsn_change_mode() failure paths jump to out_free_bus and leak
mdio_node.
Add out_put_node to drop it before falling through.
Fixes: b0d3969d2b4d ("net: ethernet: rtsn: Add support for Renesas Ethernet-TSN")
Signed-off-by: Shitalkumar Gandhi <shitalkumar.gandhi@cambiumnetworks.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20260505123236.406000-1-shitalkumar.gandhi@cambiumnetworks.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are two issues with the way psp_dev is used in nsim_do_psp():
1. There is no check for IS_ERR() on the peers psp_dev, before
dereferencing.
2. The refcount on this psp_dev can be dropped by
nsim_psp_rereg_write()
To fix this, we can make netdevsim's reference to its psp_dev an rcu
reference, and then nsim_do_psp() can read the fields it needs from an
rcu critical section.
Fixes: f857478d6206 ("netdevsim: a basic test PSP implementation")
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260505-psd-rcu-v1-3-a8f69ec1ab96@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The debugfs write handler, nsim_psp_rereg_write(), can race against
nsim_destroy() and against itself, causing nsim_psp_uninit() to run
more than once concurrently. Two complementary changes serialize all
callers:
1. Delete the psp_rereg debugfs file from nsim_psp_uninit() before
doing the actual teardown. debugfs_remove() drains any in-flight
writers and prevents new ones from starting.
2. Add a mutex around the body of nsim_psp_rereg_write() so that two
concurrent userspace writers cannot both enter the teardown path
at once.
The teardown work itself is moved into a new __nsim_psp_uninit() that
the rereg handler calls under the mutex, while the public
nsim_psp_uninit() wraps it with the debugfs_remove()/mutex_destroy()
pair so nsim_destroy() doesn't have to know about the psp internals.
Fixes: f857478d6206 ("netdevsim: a basic test PSP implementation")
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260505-psd-rcu-v1-2-a8f69ec1ab96@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
VFs go through nsim_init_netdevsim_vf() which never calls
nsim_psp_init(), so ns->psp.dev stays NULL. nsim_psp_uninit() guards
with !IS_ERR(ns->psp.dev), so destroying a VF reaches
psp_dev_unregister(NULL) and dereferences NULL on the first
mutex_lock(&psd->lock):
BUG: kernel NULL pointer dereference, address: 0000000000000020
RIP: 0010:mutex_lock+0x1c/0x30
Call Trace:
psp_dev_unregister+0x2a/0x1a0
nsim_psp_uninit+0x1f/0x40 [netdevsim]
nsim_destroy+0x61/0x1e0 [netdevsim]
__nsim_dev_port_del+0x47/0x90 [netdevsim]
nsim_drv_configure_vfs+0xc9/0x130 [netdevsim]
nsim_bus_dev_numvfs_store+0x79/0xb0 [netdevsim]
Gate nsim_psp_uninit() on nsim_dev_port_is_pf(), matching the pattern
already used for nsim_exit_netdevsim() and the bpf/ipsec/macsec/queue
teardowns.
Reproducer:
modprobe netdevsim
echo "10 1" > /sys/bus/netdevsim/new_device
echo 1 > /sys/bus/netdevsim/devices/netdevsim10/sriov_numvfs
devlink dev eswitch set netdevsim/netdevsim10 mode switchdev
echo 0 > /sys/bus/netdevsim/devices/netdevsim10/sriov_numvfs
Fixes: f857478d6206 ("netdevsim: a basic test PSP implementation")
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260505-psd-rcu-v1-1-a8f69ec1ab96@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Antonio Quartulli says:
====================
Includes changes:
* ensure MAC header offset is reset before delivering packet
* ensure gro_cells_receive() and dstats_dev_add() are called
with BH disabled
* reduce ping count in selftest to ensure it completes within
timeout
* tag 'ovpn-net-20260504' of https://github.com/OpenVPN/ovpn-net-next:
selftests: ovpn: reduce ping count in test.sh
ovpn: ensure packet delivery happens with BH disabled
ovpn: reset MAC header before passing skb up
====================
Link: https://patch.msgid.link/20260504230305.2681646-1-antonio@openvpn.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
virtbt_rx_handle() reads the leading pkt_type byte from the RX skb
and forwards the remainder to hci_recv_frame() for every
event/ACL/SCO/ISO type, without checking that the remaining payload
is at least the fixed HCI header for that type.
After the preceding patch bounds the backend-supplied used.len to
[1, VIRTBT_RX_BUF_SIZE], a one-byte completion still reaches
hci_recv_frame() with skb->len already pulled to 0. If the byte
happened to be HCI_ACLDATA_PKT, the ACL-vs-ISO classification
fast-path in hci_dev_classify_pkt_type() dereferences
hci_acl_hdr(skb)->handle whenever the HCI device has an active
CIS_LINK, BIS_LINK, or PA_LINK connection, reading two bytes of
uninitialized RX-buffer data. The same hazard exists for every
packet type the driver accepts because none of the switch cases in
virtbt_rx_handle() check skb->len against the per-type minimum HCI
header size before handing the frame to the core.
After stripping pkt_type, require skb->len to cover the fixed
header size for the selected type (event 2, ACL 4, SCO 3, ISO 4)
before calling hci_recv_frame(); drop ratelimited otherwise.
Unknown pkt_type values still take the original kfree_skb() default
path.
Use bt_dev_err_ratelimited() because both the length and pkt_type
values come from an untrusted backend that can otherwise flood the
kernel log.
Fixes: 160fbcf3bfb9 ("Bluetooth: virtio_bt: Use skb_put to set length")
Cc: stable@vger.kernel.org
Cc: Soenke Huster <soenke.huster@eknoes.de>
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
virtbt_rx_work() calls skb_put(skb, len) where len comes directly
from virtqueue_get_buf() with no validation against the buffer we
posted to the device. The RX skb is allocated in virtbt_add_inbuf()
and exposed to virtio as exactly 1000 bytes via sg_init_one().
Checking len against skb_tailroom(skb) is not sufficient because
alloc_skb() can leave more tailroom than the 1000 bytes actually
handed to the device. A malicious or buggy backend can therefore
report used.len between 1001 and skb_tailroom(skb), causing skb_put()
to include uninitialized kernel heap bytes that were never written by
the device.
The same path also accepts len == 0, in which case skb_put(skb, 0)
leaves the skb empty but virtbt_rx_handle() still reads the pkt_type
byte from skb->data, consuming uninitialized memory.
Define VIRTBT_RX_BUF_SIZE once and reuse it in alloc_skb() and
sg_init_one(), and gate virtbt_rx_work() on that same constant so
the bound checked matches the buffer actually exposed to the device.
Reject used.len == 0 in the same gate so an empty completion can
no longer reach virtbt_rx_handle().
Use bt_dev_err_ratelimited() because the length value comes from an
untrusted backend that can otherwise flood the kernel log.
Same class of bug as commit c04db81cd028 ("net/9p: Fix buffer
overflow in USB transport layer"), which hardened the USB 9p
transport against unchecked device-reported length.
Fixes: 160fbcf3bfb9 ("Bluetooth: virtio_bt: Use skb_put to set length")
Cc: stable@vger.kernel.org
Cc: Soenke Huster <soenke.huster@eknoes.de>
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
btmtk_usb_hci_wmt_sync() casts the WMT event response SKB data to
struct btmtk_hci_wmt_evt (7 bytes) and struct btmtk_hci_wmt_evt_funcc
(9 bytes) without first checking that the SKB contains enough data.
A short firmware response causes out-of-bounds reads from SKB tailroom.
Use skb_pull_data() to validate and advance past the base WMT event
header. For the FUNC_CTRL case, pull the additional status field bytes
before accessing them.
Fixes: d019930b0049 ("Bluetooth: btmtk: move btusb_mtk_hci_wmt_sync to btmtk.c")
Cc: stable@vger.kernel.org
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When a fault is injected during hci_uart line discipline setup, the
proto open() callback may fail leaving hu->priv as NULL. A subsequent
TIOCSTI ioctl can trigger the recv() callback before priv is
initialized, causing a NULL pointer dereference.
Fix all four affected HCI UART protocol drivers by adding a NULL check
on hu->priv at the start of their recv() callbacks: h4, h5, ath and
bcsp.
Reported-by: syzbot+ff30eeab8e07b37d524e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ff30eeab8e07b37d524e
Signed-off-by: Aurelien DESBRIERES <aurelien@hackers.camp>
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
CSR boot stage register bit 12 is documented as a device warning,
not a fatal error. Rename the bit definition accordingly and stop
including it in btintel_pcie_in_error().
This keeps warning-only boot stage values from being classified as
errors while preserving abort-handler state as the actual error
condition.
Fixes: 190377500fde ("Bluetooth: btintel_pcie: Dump debug registers on error")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Sai Teja Aluvala <aluvala.sai.teja@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
- Revert "parisc: led: fix reference leak on failed device
registration"
- Fix build failures introduced when allowing to build 32-/64-bit only
VDSO
- Switch to dynamic parisc root device to avoid upcoming warnings
- Fix IRQ leak in LASI driver
* tag 'parisc-for-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix IRQ leak in LASI driver
parisc: Fix 64-bit kernel build when CONFIG_COMPAT=n
parisc: Fix build failure for 32-bit kernel with PA2.0 instruction set
parisc: drivers: switch to dynamic root device
Revert "parisc: led: fix reference leak on failed device registration"
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Quite a number of fixes now:
- mac80211
- remove HT NSS validation to work with broken APs
(with a kunit fix now)
- remove 'static' that could cause races
- check station link lookup before further processing
- fix use-after-free due to delete in list iteration
- remove AP station on assoc failures to fix crashes
- ath12k
- fix OF node refcount imbalance
- fix queue flush ("REO update") in MLO
- fix RCU assert
- ath12k:
- fix Kconfig with POWER_SEQUENCING
- fix WMI buffer leaks on error conditions
- don't use uninitialized stack data when processing RSSI events
- fix logic for determining the peer ID in the RX path
- ath5k: fix a potential stack buffer overwrite
- rsi: fix thread lifetime race
- brcmfmac: fix potential UAF
- nl80211:
- stricter permissions/checks for PMK and netns
- fix netlink policy vs. code type confusion
- cw1200: revert a broken locking change
- various fixes to not trust values from firmware
* tag 'wireless-2026-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (25 commits)
wifi: nl80211: re-check wiphy netns in nl80211_prepare_wdev_dump() continuation
wifi: nl80211: require CAP_NET_ADMIN over the target netns in SET_WIPHY_NETNS
wifi: nl80211: fix NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST usage
wifi: mac80211: remove station if connection prep fails
wifi: mac80211: use safe list iteration in radar detect work
wifi: libertas: notify firmware load wait on disconnect
wifi: ath5k: do not access array OOB
wifi: ath12k: fix peer_id usage in normal RX path
wifi: ath12k: initialize RSSI dBm conversion event state
wifi: ath12k: fix leak in some ath12k_wmi_xxx() functions
wifi: cw1200: Revert "Fix locking in error paths"
wifi: mac80211: tests: mark HT check strict
wifi: rsi: fix kthread lifetime race between self-exit and external-stop
wifi: mac80211: drop stray 'static' from fast-RX rx_result
wifi: mac80211: check ieee80211_rx_data_set_link return in pubsta MLO path
wifi: nl80211: require admin perm on SET_PMK / DEL_PMK
wifi: libertas: fix integer underflow in process_cmdrequest()
wifi: b43legacy: enforce bounds check on firmware key index in RX path
wifi: b43: enforce bounds check on firmware key index in b43_rx()
wifi: brcmfmac: Fix potential use-after-free issue when stopping watchdog task
...
====================
Link: https://patch.msgid.link/20260506110325.219675-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Fix issues in EFI graceful recovery on x86 introduced by changes to
the kernel mode FPU APIs
- I-cache coherency fixes for the LoongArch EFI stub
- Locking fix for EFI pstore
- Code tweak for efivarfs
* tag 'efi-fixes-for-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
x86/efi: Restore IRQ state in EFI page fault handler
x86/efi: Fix graceful fault handling after FPU softirq changes
efi/libstub: Synchronize instruction cache after kernel relocation
efi/loongarch: Implement efi_cache_sync_image()
efi/libstub: Move efi_relocate_kernel() into its only remaining user
efi: pstore: Drop efivar lock when efi_pstore_open() returns with an error
efivarfs: use QSTR() in efivarfs_alloc_dentry
|
|
The company name "QiHeng Electronics" is incorrect.
The correct legal name is "Nanjing Qinheng Microelectronics Co., Ltd.".
Update the module description accordingly.
Signed-off-by: Jiawei Liu <ljw@wch.cn>
Link: https://patch.msgid.link/20260506062412.371034-1-ljw@wch.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The wrong index is assigned to pmh0101 ldo16, which results incorrect
rpmh resource being used when the regulator device is voted. Fix it.
Fixes: 65efe5404d15 ("regulator: rpmh-regulator: Add RPMH regulator support for Glymur")
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260506-fix_pmh0101_ldo16_index-v1-1-cdc8708b01f4@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ublk_validate_params() checks logical_bs_shift is within
[9, PAGE_SHIFT] but has no upper bound for physical_bs_shift,
io_min_shift, or io_opt_shift. A malicious userspace can set any
of these to a large value (e.g., 44), causing undefined behavior
from `1 << shift` in ublk_ctrl_start_dev() since the result is
stored in 32-bit unsigned int.
Cap all three at ilog2(SZ_256M) (28). 256M is big enough to cover
all practical block sizes, and originates from the maximum physical
block size possible in NVMe (lba_size * (1 + npwg), where npwg is
16-bit).
Also zero out ub->params with memset() when copy_from_user() fails
or ublk_validate_params() returns error, so that no stale or partial
params survive for a subsequent START_DEV to consume.
Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver")
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260506082238.22363-1-tom.leiming@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
cros_typec_register_thunderbolt() missed initializing the `adata->lock`
mutex. This leads to a NULL dereference when the mutex is later
acquired (e.g. in cros_typec_altmode_work()).
Initialize the mutex in cros_typec_register_thunderbolt() to fix the
issue.
Cc: stable@vger.kernel.org
Fixes: 3b00be26b16a ("platform/chrome: cros_ec_typec: Thunderbolt support")
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Link: https://lore.kernel.org/r/20260505053403.3335740-1-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
When utilizing Socket-Direct single netdev functionality the driver
resolves the actual auxiliary device using mlx5_sd_get_adev(). However,
the current implementation returns the primary ETH auxiliary device
without holding the device lock, leading to a potential race condition
where the ETH device could be unbound or removed concurrently during
probe, suspend, resume, or remove operations.[1]
Fix this by introducing mlx5_sd_put_adev() and updating
mlx5_sd_get_adev() so that secondaries devices would get a ref and
acquire the device lock of the returned auxiliary device. After the lock
is acquired, a second devcom check is needed[2].
In addition, update The callers to pair the get operation with the new
put operation, ensuring the lock is held while the auxiliary device is
being operated on and released afterwards.
The "primary" designation is determined once in sd_register(). It's set
before devcom is marked ready, and it never changes after that.
In Addition, The primary path never locks a secondary: When the primary
device invoke mlx5_sd_get_adev(), it sees dev == primary and returns.
no additional lock is taken.
Therefore lock ordering is always: secondary_lock -> primary_lock. The
reverse never happens, so ABBA deadlock is impossible.
[1]
for example:
BUG: kernel NULL pointer dereference, address: 0000000000000370
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP
CPU: 4 UID: 0 PID: 3945 Comm: bash Not tainted 6.19.0-rc3+ #1 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:mlx5e_dcbnl_dscp_app+0x23/0x100 [mlx5_core]
Call Trace:
<TASK>
mlx5e_remove+0x82/0x12a [mlx5_core]
device_release_driver_internal+0x194/0x1f0
bus_remove_device+0xc6/0x140
device_del+0x159/0x3c0
? devl_param_driverinit_value_get+0x29/0x80
mlx5_rescan_drivers_locked+0x92/0x160 [mlx5_core]
mlx5_unregister_device+0x34/0x50 [mlx5_core]
mlx5_uninit_one+0x43/0xb0 [mlx5_core]
remove_one+0x4e/0xc0 [mlx5_core]
pci_device_remove+0x39/0xa0
device_release_driver_internal+0x194/0x1f0
unbind_store+0x99/0xa0
kernfs_fop_write_iter+0x12e/0x1e0
vfs_write+0x215/0x3d0
ksys_write+0x5f/0xd0
do_syscall_64+0x55/0xe90
entry_SYSCALL_64_after_hwframe+0x4b/0x53
[2]
CPU0 (primary) CPU1 (secondary)
==========================================================================
mlx5e_remove() (device_lock held)
mlx5e_remove() (2nd device_lock held)
mlx5_sd_get_adev()
mlx5_devcom_comp_is_ready() => true
device_lock(primary)
mlx5_sd_get_adev() ==> ret adev
_mlx5e_remove()
mlx5_sd_cleanup()
// mlx5e_remove finished
// releasing device_lock
//need another check here...
mlx5_devcom_comp_is_ready() => false
Fixes: 381978d28317 ("net/mlx5e: Create single netdev per SD group")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260504180206.268568-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When _mlx5e_probe() fails, the preceding successful mlx5_sd_init() is
not undone. Auxiliary bus probe failure skips binding, so mlx5e_remove()
is never called for that adev and the matching mlx5_sd_cleanup() never
runs - leaking the per-dev SD struct.
Call mlx5_sd_cleanup() on the probe error path to balance
mlx5_sd_init().
A similar gap exists on the resume path: mlx5_sd_init() and
mlx5_sd_cleanup() are currently bundled with both probe/remove and
suspend/resume, even though only the FW alias state actually needs to
follow the suspend/resume lifecycle - the sd struct allocation and
devcom membership are software state that should track the full bound
lifetime. As a result, a failed resume can leave a still-bound device
with sd == NULL, which mlx5_sd_get_adev() can't distinguish from a
non-SD device. Fixing this requires sd_suspend/resume APIs which will
only destroy FW resources and is left for a follow-up series.
Fixes: 381978d28317 ("net/mlx5e: Create single netdev per SD group")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260504180206.268568-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlx5_sd_init() creates the "multi-pf" debugfs directory under the
primary device debugfs root, but stored the dentry in the calling
device's sd struct. When sd_cleanup() run on a different PF,
this leads to using the wrong sd->dfs for removing entries, which
results in memory leak and an error in when re-creating the SD.[1]
Fix it by explicitly storing the debugfs dentry in the primary
device sd struct and use it for all per-group files.
[1]
debugfs: 'multi-pf' already exists in '0000:08:00.1'
Fixes: 4375130bf527 ("net/mlx5: SD, Add debugfs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260504180206.268568-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlx5_sd_init() / mlx5_sd_cleanup() may run from multiple PFs in the same
Socket-Direct group. This can cause the SD bring-up/tear-down sequence
to be executed more than once or interleaved across PFs.
Protect SD init/cleanup with mlx5_devcom_comp_lock() and track the SD
group state on the primary device. Skip init if the primary is already
UP, and skip cleanup unless the primary is UP.
The state check on cleanup is needed because sd_register() drops the
devcom comp lock between marking the comp ready and assigning
primary_dev on each peer. A concurrent cleanup that acquires the lock
in this window would observe devcom_is_ready==true while primary_dev
is still NULL (causing mlx5_sd_get_primary() to return NULL) or while
the FW alias setup performed by mlx5_sd_init()'s body has not yet run
(causing sd_cmd_unset_primary() to dereference a NULL tx_ft). Gate the
cleanup body on primary_sd->state == MLX5_SD_STATE_UP, which is set
only at the very end of mlx5_sd_init() under the same comp lock - so
observing UP guarantees primary_dev, secondaries[], tx_ft, and dfs are
all populated. Also bail explicitly if mlx5_sd_get_primary() returns
NULL, in case state is checked on a peer whose primary_dev hasn't been
assigned yet.
In addition, move mlx5_devcom_comp_set_ready(false) from sd_unregister()
into the cleanup's locked section, including the !primary and
state != UP early-exit paths, so the device cannot unregister and free
its struct mlx5_sd while devcom is still marked ready. A concurrent
init acquiring the devcom lock will now observe devcom is no longer
ready and bail out immediately.
Fixes: 381978d28317 ("net/mlx5e: Create single netdev per SD group")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260504180206.268568-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
devlink reload while PSP connections are active does:
mlx5_unload_one_devl_locked() -> mlx5_detach_device()
-> _mlx5e_suspend()
-> mlx5e_detach_netdev()
-> profile->cleanup_rx
-> profile->cleanup_tx
-> mlx5e_destroy_mdev_resources() -> mlx5_core_dealloc_pd() fails:
...
mlx5_core 0000:08:00.0: mlx5_cmd_out_err:821:(pid 19722):
DEALLOC_PD(0x801) op_mod(0x0) failed, status bad resource state(0x9),
syndrome (0xef0c8a), err(-22)
...
The reason for failure is the existence of TX keys, which are removed by
the PSP dev unregistration happening in:
profile->cleanup() -> mlx5e_psp_unregister() -> mlx5e_psp_cleanup()
-> psp_dev_unregister()
...but this isn't invoked in the devlink reload flow, only when changing
the NIC profile (e.g. when transitioning to switchdev mode) or on dev
teardown.
Move PSP device registration into mlx5e_nic_enable(), and unregistration
into the corresponding mlx5e_nic_disable(). These functions are called
during netdev attach/detach after RX & TX are set up.
This ensures that the keys will be gone by the time the PD is destroyed.
Fixes: 89ee2d92f66c ("net/mlx5e: Support PSP offload functionality")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260504181100.269334-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, during PSP init, priv->psp is initialized to an incompletely
built psp struct. Additionally, on fs init failure priv->psp is reset to
NULL.
Change this so that only a fully initialized priv->psp is set, which
makes the code easier to reason about in failure scenarios.
Fixes: af2196f49480 ("net/mlx5e: Implement PSP operations .assoc_add and .assoc_del")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260504181100.269334-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
priv->psp->psp is initialized with the PSP device as returned by
psp_dev_create(). This could also return an error, in which case a
future psp_dev_unregister() will result in unpleasantness.
Avoid that by using a local variable and only saving the PSP device when
registration succeeds.
In case psp_dev_create() fails, priv->psp and steering structs are left
in place, but they will be inert. The unchecked access of priv->psp in
mlx5e_psp_offload_handle_rx_skb() won't happen because without a PSP
device, there can be no SAs added and therefore no packets will be
successfully decrypted and be handed off to the SW handler.
Fixes: 89ee2d92f66c ("net/mlx5e: Support PSP offload functionality")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260504181100.269334-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
t7xx_port_enum_msg_handler
t7xx_port_enum_msg_handler() uses the modem-supplied port_count field as
a loop bound over port_msg->data[] without checking that the message buffer
contains sufficient data. A modem sending port_count=65535 in a 12-byte
buffer triggers a slab-out-of-bounds read of up to 262140 bytes.
Add a sizeof(*port_msg) check before accessing the port message header
fields to guard against undersized messages.
Add a struct_size() check after extracting port_count and before the loop.
In t7xx_parse_host_rt_data(), guard the rt_feature header read with a
remaining-buffer check before accessing data_len, validate feat_data_len
against the actual remaining buffer to prevent OOB reads and signed
integer overflow on offset.
Pass msg_len from both call sites: skb->len at the DPMAIF path after
skb_pull(), and the validated feat_data_len at the handshake path.
Fixes: da45d2566a1d ("net: wwan: t7xx: Add control port")
Cc: stable@vger.kernel.org
Signed-off-by: Pavitra Jha <jhapavitra98@gmail.com>
Link: https://patch.msgid.link/20260501110713.145563-1-jhapavitra98@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is no need to calculate the target PHC cycles required
to make phase adjustment on the PPS OUT signal. This is because
the application supplies absolute n_sec value in the future and
is already the actual desired target value.
Remove the unnecessary code.
Fixes: 9e518f25802c ("bnxt_en: 1PPS functions to configure TSIO pins")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Tested-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260504083611.1383776-5-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the bnxt RDMA driver is loaded, it calls bnxt_register_dev().
As part of this, driver sends HWRM_VNIC_CFG firmware command
to configure the VNIC to operate in dual VNIC mode. Currently
the driver ignores the result of this firmware command. The RDMA
driver must know the result since it affects its functioning.
Check return value of call to bnxt_hwrm_vnic_cfg() in
bnxt_register_dev() and return failure on error.
Fixes: a588e4580a7e ("bnxt_en: Add interface to support RDMA driver.")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20260504083611.1383776-4-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the logic to set bp->max_tpa no higher than what the FW supports.
On P5 chips, some older FW sets max_tpa very low so we override it to
prevent performance regressions with the older FW.
Fixes: 79632e9ba386 ("bnxt_en: Expand bnxt_tpa_info struct to support 57500 chips.")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Colin Winegarden <colin.winegarden@broadcom.com>
Reviewed-by: Rukhsana Ansari <rukhsana.ansari@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20260504083611.1383776-3-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The FW on all chips is requiring a 5-second delay after Downstream
Port Containment (DPC) AER. The previously added 900 msec delay was
not long enough in all cases because the chip's CRS (Configuration
Request Retry Status) mechanism is not always reliable.
Fixes: d5ab32e9b02d ("bnxt_en: Add delay to handle Downstream Port Containment (DPC) AER")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20260504083611.1383776-2-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The engine state size reported to GuC via ADS should only include the
engine state portion and should not include the indirect ring state page
that comes after it in the context image. The GuC uses this size to
overwrite the engine state in the LRC on watchdog resets and we don't
want it to overwrite the indirect ring state as well.
Fixes: d6219e1cd5e3 ("drm/xe: Add Indirect Ring State support")
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260504094924.3760713-4-satyanarayana.k.v.p@intel.com
(cherry picked from commit 3ec5f003f6c377beda8bd5438941f5a7795e1848)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
|
pf_migration_mmio_save() and pf_migration_mmio_restore() initialize a
local VF-specific MMIO view via xe_mmio_init_vf_view() but then pass
>->mmio (the PF base) to all xe_mmio_read32()/xe_mmio_write32()
calls instead of the local &mmio. This causes the PF own SW flag
registers to be saved/restored rather than the target VF registers,
silently corrupting migration state.
Use the VF MMIO view for all register accesses, matching the correct
pattern used in pf_clear_vf_scratch_regs().
Fixes: b7c1b990f719 ("drm/xe/pf: Handle MMIO migration data as part of PF control")
Cc: Michał Winiarski <michal.winiarski@intel.com>
Assisted-by: Claude:claude-opus-4.6
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20260429192259.4009211-1-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
(cherry picked from commit 7d9c39cfb31ff389490ca1308767c2807a9829a6)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
|
PTR_ERR() returns a negative value, so comparing against the positive
EAGAIN is always true for ERR_PTR(-EAGAIN), causing pf_migration_consume()
to bail out instead of continuing to the remaining GTs. On multi-GT
platforms this can skip GTs that already have data ready.
Compare against -EAGAIN to match the intent (and the following line
that correctly uses -EAGAIN). While at it, gate PTR_ERR() with
IS_ERR().
v2: add IS_ERR() guard before PTR_ERR(). (Gustavo)
Fixes: 67df4a5cbc58 ("drm/xe/pf: Add data structures and handlers for migration rings")
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20260428201448.3999428-1-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
(cherry picked from commit 9d770e72e1edb54beacfce5f402edb51632811e3)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
|
When media GT is disabled via configfs, there is no allocation for
media_gt, which is kept as NULL. In such scenario,
intel_hdcp_gsc_check_status() results in a kernel pagefault error due to
>->uc.gsc being evaluated as an invalid memory address.
Fix that by introducing a NULL check on media_gt and bailing out early
if so.
While at it, also drop the NULL check for gsc, since it can't be NULL if
media_gt is not NULL.
v2:
- Get address for gsc only after checking that gt is not NULL.
(Shuicheng)
- Drop the NULL check for gsc. (Shuicheng)
v3:
- Add "Fixes" and "Cc: <stable...>" tags. (Matt)
Fixes: 4af50beb4e0f ("drm/xe: Use gsc_proxy_init_done to check proxy status")
Cc: <stable@vger.kernel.org> # v6.10+
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://patch.msgid.link/20260416-check-for-null-media_gt-in-intel_hdcp_gsc_check_status-v2-1-9adb9fd3b621@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
(cherry picked from commit bfaf87e84ca3ca3f6e275f9ae56da47a8b55ffd1)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"All in drivers.
The largest change is the ufs one which has to introduce a new
function to check the power state before doing the update and the most
widely encountered one is the obvious change to sg to not use
GFP_ATOMIC"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: iscsi: reject invalid size Extended CDB AHS
scsi: ufs: core: Fix bRefClkFreq write failure in HS-LSS mode
scsi: hisi_sas: Fix sparse warnings in prep_ata_v3_hw()
scsi: pmcraid: Fix typo in comments
scsi: scsi_dh_alua: Increase default ALUA timeout to maximum spec value
scsi: smartpqi: Silence a recursive lock warning
scsi: mpt3sas: Limit NVMe request size to 2 MiB
scsi: sg: Don't use GFP_ATOMIC in sg_start_req()
scsi: target: configfs: Bound snprintf() return in tg_pt_gp_members_show()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
"Four small patches for fbdev, of which two are important: One fixes
the bitmap font generation and the other prevents a possible
use-after-free in udlfb:
- Fix rotating fonts by 180 degrees (Thomas Zimmermann)
- Drop duplicate include of linux/module.h in fb_defio (Chen Ni)
- Add vm_ops in udlfb to prevent use-after-free (Rajat Gupta)
- ipu-v3: clean up kernel-doc warnings (Randy Dunlap)"
* tag 'fbdev-for-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: udlfb: add vm_ops to dlfb_ops_mmap to prevent use-after-free
lib/fonts: Fix bit position when rotating by 180 degrees
fbdev: defio: Remove duplicate include of linux/module.h
fbdev: ipu-v3: clean up kernel-doc warnings
|
|
Pull rdma fixes from Jason Gunthorpe:
- Several error unwind misses on system calls in mlx5, mana, ocrdma,
vmw_pvrdma, mlx4, and hns
- More rxe bugs processing network packets
- User triggerable races in mlx5 when destroying and creating the same
same object when the FW returns the same object ID
- Incorrect passing of an IPv6 address through netlink
RDMA_NL_LS_OP_IP_RESOLVE
- Add memory ordering for mlx5's lock avoidance pattenr
- Protect mana from kernel memory overflow
- Use safe patterns for xarray/radix_tree look up in mlx5 and hns
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (24 commits)
RDMA/hns: Fix unlocked call to hns_roce_qp_remove()
RDMA/hns: Fix xarray race in hns_roce_create_qp_common()
RDMA/hns: Fix xarray race in hns_roce_create_srq()
RDMA/mlx4: Fix mis-use of RCU in mlx4_srq_event()
RDMA/mlx4: Fix resource leak on error in mlx4_ib_create_srq()
RDMA/vmw_pvrdma: Fix double free on pvrdma_alloc_ucontext() error path
RDMA/ocrdma: Don't NULL deref uctx on errors in ocrdma_copy_pd_uresp()
RDMA/ocrdma: Clarify the mm_head searching
RDMA/mana: Fix error unwind in mana_ib_create_qp_rss()
RDMA/mana: Fix mana_destroy_wq_obj() cleanup in mana_ib_create_qp_rss()
RDMA |
