| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Before this change the LED was added to leds_list before led_init_core()
gets called adding it the list before led_classdev.set_brightness_work gets
initialized.
This leaves a window where led_trigger_register() of a LED's default
trigger will call led_trigger_set() which calls led_set_brightness()
which in turn will end up queueing the *uninitialized*
led_classdev.set_brightness_work.
This race gets hit by the lenovo-thinkpad-t14s EC driver which registers
2 LEDs with a default trigger provided by snd_ctl_led.ko in quick
succession. The first led_classdev_register() causes an async modprobe of
snd_ctl_led to run and that async modprobe manages to exactly hit
the window where the second LED is on the leds_list without led_init_core()
being called for it, resulting in:
------------[ cut here ]------------
WARNING: CPU: 11 PID: 5608 at kernel/workqueue.c:4234 __flush_work+0x344/0x390
Hardware name: LENOVO 21N2S01F0B/21N2S01F0B, BIOS N42ET93W (2.23 ) 09/01/2025
...
Call trace:
__flush_work+0x344/0x390 (P)
flush_work+0x2c/0x50
led_trigger_set+0x1c8/0x340
led_trigger_register+0x17c/0x1c0
led_trigger_register_simple+0x84/0xe8
snd_ctl_led_init+0x40/0xf88 [snd_ctl_led]
do_one_initcall+0x5c/0x318
do_init_module+0x9c/0x2b8
load_module+0x7e0/0x998
Close the race window by moving the adding of the LED to leds_list to
after the led_init_core() call.
Cc: stable@vger.kernel.org
Fixes: d23a22a74fde ("leds: delay led_set_brightness if stopping soft-blink")
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Link: https://patch.msgid.link/20251211163727.366441-1-johannes.goede@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
During the rework of the fan behavior control code in commit
d8e8362b09d3 ("platform/x86: acer-wmi: Fix setting of fan behavior"),
acer_toggle_turbo() was changed to use WMID_gaming_set_fan_behavior()
instead of WMID_gaming_set_u64() when switching the fans to turbo
mode. The new function however does not check if the necessary
capability (ACER_CAP_TURBO_FAN) is actually enabled on a given
machine, causing the driver to potentially access unsupported
features.
Fix this by manually checking if ACER_CAP_TURBO_FAN is enabled
on a given machine before changing the fan mode.
Cc: stable@vger.kernel.org
Fixes: d8e8362b09d3 ("platform/x86: acer-wmi: Fix setting of fan behavior")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260108164716.14376-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The Acer Nitro AN515-58 additionally supports fan control. Modify
the quirk list to enable said feature on this machine.
Reported-by: Pranay Pawar <pranaypawarofficial@gmail.com>
Closes: https://lore.kernel.org/platform-driver-x86/CACy5qBaFv_L5y_nGJU_3pd3CXbFZrUAE18y5Fc-hnAmrd8bSLA@mail.gmail.com/
Tested-by: Pranay Pawar <pranaypawarofficial@gmail.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260108164716.14376-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add TDP data for laptop model GA403WW.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260116180637.859803-5-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Model GA403WM appears after GA403WR breaking the alphabetical order:
swap theirs position.
Fixes: f5fc40734b0f ("platform/x86: asus-armoury: add support for GA403WM")
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260116180637.859803-4-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add TDP data for laptop model G835L.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260116180637.859803-3-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
ppt_pl3_fppt_def and ppt_pl3_fppt_max are wrong: correct it.
Fixes: a22d893f490d ("platform/x86: asus-armoury: add support for FA608UM")
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260116180637.859803-2-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
hp-bioscfg has a MODULE_DEVICE_TABLE with a GUID in it that looks
plausible, but the module doesn't automatically load on applicable
systems.
This is because the GUID has some lower case characters and so it
doesn't match the modalias during boot. Update the GUIDs to be all
uppercase.
Cc: stable@vger.kernel.org
Fixes: 5f94f181ca25 ("platform/x86: hp-bioscfg: bioscfg-h")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260115203725.828434-4-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The GET_INSTANCE_ID macro that caused a kernel panic when accessing sysfs
attributes:
1. Off-by-one error: The loop condition used '<=' instead of '<',
causing access beyond array bounds. Since array indices are 0-based
and go from 0 to instances_count-1, the loop should use '<'.
2. Missing NULL check: The code dereferenced attr_name_kobj->name
without checking if attr_name_kobj was NULL, causing a null pointer
dereference in min_length_show() and other attribute show functions.
The panic occurred when fwupd tried to read BIOS configuration attributes:
Oops: general protection fault [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:min_length_show+0xcf/0x1d0 [hp_bioscfg]
Add a NULL check for attr_name_kobj before dereferencing and corrects
the loop boundary to match the pattern used elsewhere in the driver.
Cc: stable@vger.kernel.org
Fixes: 5f94f181ca25 ("platform/x86: hp-bioscfg: bioscfg-h")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260115203725.828434-3-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Fix several issues in dw_dp_bind() error handling:
1. Missing return after drm_bridge_attach() failure - the function
continued execution instead of returning an error.
2. Resource leak: drm_dp_aux_register() is not a devm function, so
drm_dp_aux_unregister() must be called on all error paths after
aux registration succeeds. This affects errors from:
- drm_bridge_attach()
- phy_init()
- devm_add_action_or_reset()
- platform_get_irq()
- devm_request_threaded_irq()
3. Bug fix: platform_get_irq() returns the IRQ number or a negative
error code, but the error path was returning ERR_PTR(ret) instead
of ERR_PTR(dp->irq).
Use a goto label for cleanup to ensure consistent error handling.
Fixes: 86eecc3a9c2e ("drm/bridge: synopsys: Add DW DPTX Controller support library")
Cc: stable@vger.kernel.org
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260102155553.13243-1-osama.abdelkader@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
The upper limit of the firmware queue fill state for each APQN
is reported by the hwinfo.qd field. This field shows the
numbers 0-7 for 1-8 queue spaces available. But the exploiting
code assumed the real boundary is stored there and thus stoppes
queuing in messages one tick too early.
Correct the limit calculation and thus offer a boost
of 12.5% performance for high traffic on one APQN.
Fixes: d4c53ae8e4948 ("s390/ap: store TAPQ hwinfo in struct ap_card")
Cc: stable@vger.kernel.org
Reported-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
rtsx_pci_sdmmc does not have an sdmmc_card_busy function, so any voltage
switches cause a kernel warning, "mmc0: cannot verify signal voltage
switch."
Copy the sdmmc_card_busy function from rtsx_pci_usb to rtsx_pci_sdmmc to
fix this.
Fixes: ff984e57d36e ("mmc: Add realtek pcie sdmmc host driver")
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Tested-by: Ricky WU <ricky_wu@realtek.com>
Reviewed-by: Ricky WU <ricky_wu@realtek.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
On error handling paths, gpiolib_cdev_register() doesn't free the
allocated resources which results leaks. Fix it.
Cc: stable@vger.kernel.org
Fixes: 7b9b77a8bba9 ("gpiolib: add a per-gpio_device line state notification workqueue")
Fixes: d83cee3d2bb1 ("gpio: protect the pointer to gpio_chip in gpio_device with SRCU")
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20260120092650.2305319-1-tzungbi@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1 into char-misc-linus
1-Wire bus drivers fixes
Non critical (old issues) fixes:
1. Fix possible buffer overflow in W1 thermal driver sysfs interfasce,
2. Drop duplicated device put when attaching a slave device failed,
which could lead to memory corruption.
* tag 'w1-drv-6.20' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1:
w1: fix redundant counter decrement in w1_attach_slave_device()
w1: therm: Fix off-by-one buffer overflow in alarms_store
|
|
Older versions of gcc and clang sometimes get tripped up by the build time
assertion in FIELD_PREP because they can see that the argument to
FIELD_PREP is constant but can't see that the if condition protecting it
is also a constant false.
In file included from <command-line>:
In function 'amdv1pt_install_leaf_entry',
inlined from '__do_map_single_page' at drivers/iommu/generic_pt/fmt/../iommu_pt.h:651:3,
inlined from '__map_single_page0' at drivers/iommu/generic_pt/fmt/../iommu_pt.h:662:1,
inlined from 'pt_descend' at drivers/iommu/generic_pt/fmt/../pt_iter.h:391:9,
inlined from '__do_map_single_page' at drivers/iommu/generic_pt/fmt/../iommu_pt.h:658:10,
inlined from '__map_single_page1.constprop' at drivers/iommu/generic_pt/fmt/../iommu_pt.h:662:1:
././include/linux/compiler_types.h:631:45: error: call to '__compiletime_assert_251' declared with attribute error: FIELD_PREP: value too large for the field
631 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^
././include/linux/compiler_types.h:612:25: note: in definition of macro '__compiletime_assert'
612 | prefix ## suffix(); \
| ^~~~~~
././include/linux/compiler_types.h:631:9: note: in expansion of macro '_compiletime_assert'
631 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^~~~~~~~~~~~~~~~~~~
./include/linux/build_bug.h:39:37: note: in expansion of macro 'compiletime_assert'
39 | #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
| ^~~~~~~~~~~~~~~~~~
./include/linux/bitfield.h:69:17: note: in expansion of macro 'BUILD_BUG_ON_MSG'
69 | BUILD_BUG_ON_MSG(__builtin_constant_p(_val) ? \
| ^~~~~~~~~~~~~~~~
./include/linux/bitfield.h:90:17: note: in expansion of macro '__BF_FIELD_CHECK_MASK'
90 | __BF_FIELD_CHECK_MASK(mask, val, pfx); \
| ^~~~~~~~~~~~~~~~~~~~~
./include/linux/bitfield.h:137:17: note: in expansion of macro '__FIELD_PREP'
137 | __FIELD_PREP(_mask, _val, "FIELD_PREP: "); \
| ^~~~~~~~~~~~
drivers/iommu/generic_pt/fmt/amdv1.h:220:26: note: in expansion of macro 'FIELD_PREP'
220 | FIELD_PREP(AMDV1PT_FMT_OA,
| ^~~~~~~~~~
Changing the caller to check pts.level == 0 avoids demanding a bit of
complex reasoning from the compiler that pts.level == level == 0. Instead
the compiler sees that pt_install_leaf_entry() is called with a constant
pts.level == 0 which makes it more reliable to see the constant false in
the if.
Fixes: dcd6a011a8d5 ("iommupt: Add map_pages op")
Reported-by: Chunyu Hu <chuhu@redhat.com>
Closes: https://lore.kernel.org/all/aUn9uGPCooqB-RIF@gmail.com/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
On 32-bit machines with CONFIG_ARM_LPAE, it is possible for lowmem
allocations to be backed by addresses physical memory above the 32-bit
address limit, as found while experimenting with larger VMSPLIT
configurations.
This caused the qemu virt model to crash in the GICv3 driver, which
allocates the 'itt' object using GFP_KERNEL. Since all memory below
the 4GB physical address limit is in ZONE_DMA in this configuration,
kmalloc() defaults to higher addresses for ZONE_NORMAL, and the
ITS driver stores the physical address in a 32-bit 'unsigned long'
variable.
Change the itt_addr variable to the correct phys_addr_t type instead,
along with all other variables in this driver that hold a physical
address.
The gicv5 driver correctly uses u64 variables, while all other irqchip
drivers don't call virt_to_phys or similar interfaces. It's expected that
other device drivers have similar issues, but fixing this one is
sufficient for booting a virtio based guest.
Fixes: cc2d3216f53c ("irqchip: GICv3: ITS command queue")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260119201603.2713066-1-arnd@kernel.org
|
|
This fixes a simple typo in the TH1520 SPI0 for group3 pins:
QSPI0 is misspelled QSPI1.
Signed-off-by: Thomas Gerner <thomas.gerner@muenchen-mail.de>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
On error handling paths, lineinfo_changed_notify() doesn't free the
allocated resources which results leaks. Fix it.
Cc: stable@vger.kernel.org
Fixes: d4cd0902c156 ("gpio: cdev: make sure the cdev fd is still active before emitting events")
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20260120030857.2144847-1-tzungbi@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
-ENOMEM is a more appropriate return code for memory allocation
failures. Correct it.
Cc: stable@vger.kernel.org
Fixes: 20bddcb40b2b ("gpiolib: cdev: replace locking wrappers for gpio_device with guards")
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20260116081036.352286-6-tzungbi@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
The cpu_bitmap flexible array now contains more than just the cpu_bitmap.
In preparation for changing the static mm_struct definitions to cover for
the additional space required, change the cpu_bitmap type from "unsigned
long" to "char", require an unsigned long alignment of the flexible array,
and rename the field from "cpu_bitmap" to "flexible_array".
Introduce the MM_STRUCT_FLEXIBLE_ARRAY_INIT macro to statically initialize
the flexible array. This covers the init_mm and efi_mm static
definitions.
This is a preparation step for fixing the missing mm_cid size for static
mm_struct definitions.
Link: https://lkml.kernel.org/r/20251224173358.647691-3-mathieu.desnoyers@efficios.com
Fixes: af7f588d8f73 ("sched: Introduce per-memory-map concurrency ID")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Thomas Gleixner <tglx@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Aboorva Devarajan <aboorvad@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Christan König <christian.koenig@amd.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Liam R . Howlett" <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Martin Liu <liumartin@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Damien Le Moal:
- A set of fixes for link power management as the recent changes/fixes
introduced regressions with ATAPI devices and with adapters that have
DUMMY ports, preventing an adapter to fully reach a low power state
and thus preventing the system CPU from reaching low power C-states
(from Niklas)
* tag 'ata-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata: Print features also for ATAPI devices
ata: libata: Add DIPM and HIPM to ata_dev_print_features() early return
ata: libata: Add cpr_log to ata_dev_print_features() early return
ata: libata-sata: Improve link_power_management_supported sysfs attribute
ata: libata: Call ata_dev_config_lpm() for ATAPI devices
ata: ahci: Do not read the per port area for unimplemented ports
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2026-01-16
The first patch is by me and sets the missing CAN device default
capabilities in the CAN device layer.
The next patch is by me, target the gs_usb driver and adds the missing
unanchor URB on usb_submit_urb() error.
The last 5 patches are also from me and fix the same USB-URB leak (as
in the gs_usb driver) in the affected CAN-USB driver: ems_usb,
esd_usb, kvaser_usb, mcba_usb and usb_8dev.
* tag 'linux-can-fixes-for-6.19-20260116' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: usb_8dev: usb_8dev_read_bulk_callback(): fix URB memory leak
can: mcba_usb: mcba_usb_read_bulk_callback(): fix URB memory leak
can: kvaser_usb: kvaser_usb_read_bulk_callback(): fix URB memory leak
can: esd_usb: esd_usb_read_bulk_callback(): fix URB memory leak
can: ems_usb: ems_usb_read_bulk_callback(): fix URB memory leak
can: gs_usb: gs_usb_receive_bulk_callback(): unanchor URL on usb_submit_urb() error
can: dev: alloc_candev_mqs(): add missing default CAN capabilities
====================
Link: https://patch.msgid.link/20260116200323.366877-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The RX flowid programming initializes the TCAM mask to all ones, but
then overwrites it when clearing the MAC DA mask bits. This results
in losing the intended initialization and may affect other match fields.
Update the code to clear the MAC DA bits using an AND operation, making
the handling of mask[0] consistent with mask[1], where the field-specific
bits are cleared after initializing the mask to ~0ULL.
Fixes: 57d00d4364f3 ("octeontx2-pf: mcs: Match macsec ethertype along with DMAC")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/20260116164724.2733511-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make the addrs_lock be per port, not per ipvlan dev.
Initial code seems to be written in the assumption,
that any address change must occur under RTNL.
But it is not so for the case of IPv6. So
1) Introduce per-port addrs_lock.
2) It was needed to fix places where it was forgotten
to take lock (ipvlan_open/ipvlan_close)
This appears to be a very minor problem though.
Since it's highly unlikely that ipvlan_add_addr() will
be called on 2 CPU simultaneously. But nevertheless,
this could cause:
1) False-negative of ipvlan_addr_busy(): one interface
iterated through all port->ipvlans + ipvlan->addrs
under some ipvlan spinlock, and another added IP
under its own lock. Though this is only possible
for IPv6, since looks like only ipvlan_addr6_event() can be
called without rtnl_lock.
2) Race since ipvlan_ht_addr_add(port) is called under
different ipvlan->addrs_lock locks
This should not affect performance, since add/remove IP
is a rare situation and spinlock is not taken on fast
paths.
Fixes: 8230819494b3 ("ipvlan: use per device spinlock to protect addrs list updates")
Signed-off-by: Dmitry Skorodumov <skorodumov.dmitry@huawei.com>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20260112142417.4039566-2-skorodumov.dmitry@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Upstream is on rc5, we're still on rc1. No luck in hoping for a
fast-forward, time to backmerge!
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
The sizeof_wfhw field wasn't populated in max7360_pwm_ops so it was set
to 0 by default.
While this is ok for now because:
sizeof(struct max7360_pwm_waveform) < PWM_WFHWSIZE
in the future, if struct max7360_pwm_waveform grows, it could lead to
stack corruption.
Fixes: d93a75d94b79 ("pwm: max7360: Add MAX7360 PWM support")
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Link: https://patch.msgid.link/20260113163907.368919-1-richard.genoud@bootlin.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
copy_to_user() returns the number of bytes not copied, thus if there is
a problem a positive number. However the ioctl callback is supposed to
return a negative error code on error.
This error is a unfortunate as strictly speaking it became ABI with the
introduction of pwm character devices. However I never saw the issue in
real life -- I found this by code inspection -- and it only affects an
error case where readonly memory is passed to the ioctls or the address
mapping changes while the ioctl is active. Also there are already error
cases returning negative values, so the calling code must be prepared to
see such values already.
Fixes: 9c06f26ba5f5 ("pwm: Add support for pwmchip devices for faster and easier userspace access")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260119151325.571857-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
Add a check for devm_kzalloc failure in fp9931_probe to prevent a
null pointer dereference.
Fixes: 12d821bd13d4 ("regulator: Add FP9931/JD9930 driver")
Signed-off-by: Felix Gu <gu_0233@qq.com>
Link: https://patch.msgid.link/tencent_5FCF2108621C51007E5526A7C60A5CC1F306@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
Possibility of no FW trace available after update in the fw_trace_mask due
to asynchronous mode of command consumption in the FW.
To ensure FW trace is available after update, wait for FW trace log update
command completion from the FW.
Fixes: cc1aeedb98ad ("drm/imagination: Implement firmware infrastructure and META FW support")
Signed-off-by: Brajesh Gupta <brajesh.gupta@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patch.msgid.link/20260108040936.129769-1-brajesh.gupta@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
|
|
Qualcomm SC7280 and SM8350 SoCs have slightly different LPASS audio
blocks (v9.4.5 and v9.2), however the LPASS LPI pin controllers are
exactly the same. The driver for SM8350 has two issues, which can be
fixed by simply moving over to SC7280 driver which has them correct:
1. "i2s2_data_groups" listed twice GPIO12, but should have both GPIO12
and GPIO13,
2. "swr_tx_data_groups" contained GPIO5 for "swr_tx_data2" function, but
that function is also available on GPIO14, thus listing it twice is
not necessary. OTOH, GPIO5 has also "swr_rx_data1", so selecting
swr_rx_data function should not block the TX one.
Fixes: be9f6d56381d ("pinctrl: qcom: sm8350-lpass-lpi: add SM8350 LPASS TLMM")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
The GPIO controller is configured as non-sleeping but it uses generic
pinctrl helpers which use a mutex for synchronization.
This can cause the following lockdep splat with shared GPIOs enabled on
boards which have multiple devices using the same GPIO:
BUG: sleeping function called from invalid context at
kernel/locking/mutex.c:591
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 142, name:
kworker/u25:3
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
INFO: lockdep is turned off.
irq event stamp: 46379
hardirqs last enabled at (46379): [<ffff8000813acb24>]
_raw_spin_unlock_irqrestore+0x74/0x78
hardirqs last disabled at (46378): [<ffff8000813abf38>]
_raw_spin_lock_irqsave+0x84/0x88
softirqs last enabled at (46330): [<ffff8000800c71b4>]
handle_softirqs+0x4c4/0x4dc
softirqs last disabled at (46295): [<ffff800080010674>]
__do_softirq+0x14/0x20
CPU: 1 UID: 0 PID: 142 Comm: kworker/u25:3 Tainted: G C
6.19.0-rc4-next-20260105+ #11963 PREEMPT
Tainted: [C]=CRAP
Hardware name: Khadas VIM3 (DT)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
show_stack+0x18/0x24 (C)
dump_stack_lvl+0x90/0xd0
dump_stack+0x18/0x24
__might_resched+0x144/0x248
__might_sleep+0x48/0x98
__mutex_lock+0x5c/0x894
mutex_lock_nested+0x24/0x30
pinctrl_get_device_gpio_range+0x44/0x128
pinctrl_gpio_set_config+0x40/0xdc
gpiochip_generic_config+0x28/0x3c
gpio_do_set_config+0xa8/0x194
gpiod_set_config+0x34/0xfc
gpio_shared_proxy_set_config+0x6c/0xfc [gpio_shared_proxy]
gpio_do_set_config+0xa8/0x194
gpiod_set_transitory+0x4c/0xf0
gpiod_configure_flags+0xa4/0x480
gpiod_find_and_request+0x1a0/0x574
gpiod_get_index+0x58/0x84
devm_gpiod_get_index+0x20/0xb4
devm_gpiod_get+0x18/0x24
mmc_pwrseq_emmc_probe+0x40/0xb8
platform_probe+0x5c/0xac
really_probe+0xbc/0x298
__driver_probe_device+0x78/0x12c
driver_probe_device+0xdc/0x164
__device_attach_driver+0xb8/0x138
bus_for_each_drv+0x80/0xdc
__device_attach+0xa8/0x1b0
Fixes: 6ac730951104 ("pinctrl: add driver for Amlogic Meson SoCs")
Cc: stable@vger.kernel.org
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/00107523-7737-4b92-a785-14ce4e93b8cb@samsung.com/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Partially refactor mtk_gem to stop using (and remove) the unneeded
custom mtk_gem_obj structure and migrate drivers to use the API
defined drm_gem_dma_object structure instead, and to align all of
the functions to be similar to the logic from drm_gem_dma_helper.
Unfortunately, for this driver it wasn't possible to directly use
the drm_gem_dma_helper callbacks (apart from .print_info), as the
DMA mapping here is done on specific dma devices instead of the
main DRM device.
Also, since the mtk_gem_obj structure is no more, also migrate the
mtk_plane.c code to grab the DMA address from a drm_gem_dma_object
and replace the inclusion of the custom mtk_gem.h header (as it is
now unneeded) with the DRM API provided drm_gem_dma_helper.
While at it, also set DRM_GEM_DMA_HELPER as an unconditional
dependency (remove the `if DRM_FBDEV_EMULATION` from the select
DRM_GEM_DMA_HELPER statement in Kconfig).
This resolves an issue pointed by UBSAN, as when using drm_fbdev_dma
the drm_gem_object is supposed to be child of a drm_gem_dma_object
instead of a custom mtk_gem_obj (or the mtk_gem_obj should have been
reordered to have the same fields as drm_gem_dma_object, but that
would have been too fragile and generally a bad idea anyway).
Fixes: 0992284b4fe4 ("drm/mediatek: Use fbdev-dma")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20251111085114.9752-1-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Trying to find the next bridge and deferring probe in the bridge attach
callback is much too late. At this point the driver has already finished
probing and is now running the component bind code path. What's even
worse is that in the specific case of the DSI host being the last
component to be added as part of the dsi_host_attach callback, the code
path that this is in:
-> devm_drm_of_get_bridge()
mtk_dpi_bridge_attach()
drm_bridge_attach()
mtk_dpi_bind()
...
component_add()
mtk_dsi_host_attach()
anx7625_attach_dsi()
anx7625_link_bridge()
- done_probing callback for of_dp_aux_populate_bus()
of_dp_aux_populate_bus()
anx7625_i2c_probe()
_cannot_ return probe defer:
anx7625 4-0058: [drm:anx7625_bridge_attach] drm attach
mediatek-drm mediatek-drm.15.auto: bound 14014000.dsi
(ops mtk_dsi_component_ops)
mediatek-drm mediatek-drm.15.auto: error -EPROBE_DEFER:
failed to attach bridge /soc/dpi@14015000 to encoder TMDS-37
[drm:mtk_dsi_host_attach] *ERROR* failed to add dsi_host
component: -517
anx7625 4-0058: [drm:anx7625_link_bridge] *ERROR* fail to attach dsi
to host.
panel-simple-dp-aux aux-4-0058: DP AUX done_probing() can't defer
panel-simple-dp-aux aux-4-0058: probe with driver panel-simple-dp-aux
failed with error -22
anx7625 4-0058: [drm:anx7625_i2c_probe] probe done
This results in the whole display driver failing to probe.
Perhaps this was an attempt to mirror the structure in the DSI driver;
but in the DSI driver the next bridge is retrieved in the DSI attach
callback, not the bridge attach callback.
Move the code finding the next bridge back to the probe function so that
deferred probing works correctly. Also rework the fallback to the old OF
graph endpoint numbering scheme so that deferred probing logs in both
cases.
This issue was found on an MT8183 Jacuzzi device with an extra patch
enabling the DPI-based external display pipeline. Also tested on an
MT8192 Hayato device with both DSI and DPI display pipelines enabled.
Fixes: 4c932840db1d ("drm/mediatek: Implement OF graphs support for display paths")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20260114092243.3914836-1-wenst@chromium.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"A bunch of driver fixes for:
- dma mask fix for mmp pdma driver
- Xilinx regmap max register, uninitialized addr_width fix
- device leak fix for bunch of drivers in the subsystem
- stm32 dmamux, TI crossbar driver fixes for device & of node leak
and route allocation cleanup
- Tegra use afer free fix
- Memory leak fix in Qualcomm gpi and omap-dma driver
- compatible fix for apple driver"
* tag 'dmaengine-fix-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (25 commits)
dmaengine: apple-admac: Add "apple,t8103-admac" compatible
dmaengine: omap-dma: fix dma_pool resource leak in error paths
dmaengine: qcom: gpi: Fix memory leak in gpi_peripheral_config()
dmaengine: sh: rz-dmac: Fix rz_dmac_terminate_all()
dmaengine: xilinx_dma: Fix uninitialized addr_width when "xlnx,addrwidth" property is missing
dmaengine: tegra-adma: Fix use-after-free
dmaengine: fsl-edma: Fix clk leak on alloc_chan_resources failure
dmaengine: mmp_pdma: Fix race condition in mmp_pdma_residue()
dmaengine: ti: k3-udma: fix device leak on udma lookup
dmaengine: ti: dma-crossbar: clean up dra7x route allocation error paths
dmaengine: ti: dma-crossbar: fix device leak on am335x route allocation
dmaengine: ti: dma-crossbar: fix device leak on dra7x route allocation
dmaengine: stm32: dmamux: clean up route allocation error labels
dmaengine: stm32: dmamux: fix OF node leak on route allocation failure
dmaengine: stm32: dmamux: fix device leak on route allocation
dmaengine: sh: rz-dmac: fix device leak on probe failure
dmaengine: lpc32xx-dmamux: fix device leak on route allocation
dmaengine: lpc18xx-dmamux: fix device leak on route allocation
dmaengine: idxd: fix device leaks on compat bind and unbind
dmaengine: dw: dmamux: fix OF node leak on route allocation failure
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
"A bunch of driver fixes:
- Freescale typec orientation switch fix, clearing register fix,
assertion of phy reset during power on
- Qualcomm pcs register clear before using
- stm one off fix
- TI runtimepm error handling, regmap leak fixes
- Rockchip gadget mode disconnection and disruption fixes
- Tegra register level fix
- Broadcom pointer cast warning fix"
* tag 'phy-fixes-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: freescale: imx8m-pcie: assert phy reset during power on
phy: rockchip: inno-usb2: Fix a double free bug in rockchip_usb2phy_probe()
phy: broadcom: ns-usb3: Fix Wvoid-pointer-to-enum-cast warning (again)
phy: tegra: xusb: Explicitly configure HS_DISCON_LEVEL to 0x7
phy: rockchip: inno-usb2: fix communication disruption in gadget mode
phy: rockchip: inno-usb2: fix disconnection in gadget mode
phy: ti: gmii-sel: fix regmap leak on probe failure
phy: sparx5-serdes: make it selectable for ARCH_LAN969X
phy: ti: da8xx-usb: Handle devm_pm_runtime_enable() errors
phy: stm32-usphyc: Fix off by one in probe()
phy: qcom-qusb2: Fix NULL pointer dereference on early suspend
phy: fsl-imx8mq-usb: Clear the PCS_TX_SWING_FULL field before using it
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings for qcs8300
phy: fsl-imx8mq-usb: fix typec orientation switch when built as module
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fix from Vinod Koul:
- Single off-by-one fix for allocating slave id
* tag 'soundwire-6.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: bus: fix off-by-one when allocating slave IDs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes and new device ids for 6.19-rc6
Included in here are:
- new usb-serial device ids
- dwc3-apple driver fixes to get things working properly on that
hardware platform
- ohci/uhci platfrom driver module soft-deps with ehci to remove a
runtime warning that sometimes shows up on some platforms.
- quirk for broken devices that can not handle reading the BOS
descriptor from them without going crazy.
- usb-serial driver fixes
- xhci driver fixes
- usb gadget driver fixes
All of these except for the last xhci fix has been in linux-next for a
while. The xhci fix has been reported by others to solve the issue for
them, so should be ok"
* tag 'usb-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: sideband: don't dereference freed ring when removing sideband endpoint
usb: gadget: uvc: retry vb2_reqbufs() with vb_vmalloc_memops if use_sg fail
usb: gadget: uvc: return error from uvcg_queue_init()
usb: gadget: uvc: fix interval_duration calculation
usb: gadget: uvc: fix req_payload_size calculation
usb: dwc3: apple: Ignore USB role switches to the active role
usb: host: xhci-tegra: Use platform_get_irq_optional() for wake IRQs
USB: OHCI/UHCI: Add soft dependencies on ehci_platform
usb: dwc3: apple: Set USB2 PHY mode before dwc3 init
USB: serial: f81232: fix incomplete serial port generation
USB: serial: ftdi_sio: add support for PICAXE AXE027 cable
USB: serial: option: add Telit LE910 MBIM composition
usb: core: add USB_QUIRK_NO_BOS for devices that hang on BOS descriptor
dt-bindings: usb: qcom,dwc3: Correct MSM8994 interrupts
dt-bindings: usb: qcom,dwc3: Correct IPQ5018 interrupts
tcpm: allow looking for role_sw device in the main node
usb: dwc3: Check for USB4 IP_NAME
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- riic, imx-lpi2c: suspend/resume fixes
- qcom-geni: DMA handling fix
- iproc: correct DT binding description
* tag 'i2c-for-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: imx-lpi2c: change to PIO mode in system-wide suspend/resume progress
i2c: qcom-geni: make sure I2C hub controllers can't use SE DMA
i2c: riic: Move suspend handling to NOIRQ phase
dt-bindings: i2c: brcm,iproc-i2c: Allow 2 reg entries for brcm,iproc-nic-i2c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
"Make sure the memory-mapped memory controller registers BAR gets
unmapped when the driver memory allocation fails
Fix that in both x38 and i3200 EDAC drivers as former has copied the
bug from the latter, it looks like"
* tag 'edac_urgent_for_v6.19_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/x38: Fix a resource leak in x38_probe1()
EDAC/i3200: Fix a resource leak in i3200_probe1()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"Fix a riscv-imsic irqchip driver regression"
* tag 'irq-urgent-2026-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/riscv-imsic: Revert "Remove redundant irq_data lookups"
|
|
The timestamp WA does not work on a VF because it requires reading MMIO
registers, which are inaccessible on a VF. This timestamp WA confuses
LRC sampling on a VF during TDR, as the LRC timestamp would always read
as 1 for any active context. Disable the timestamp WA on VFs to avoid
this confusion.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Fixes: 617d824c5323 ("drm/xe: Add WA BB to capture active context utilization")
Link: https://patch.msgid.link/20260110012739.2888434-7-matthew.brost@intel.com
(cherry picked from commit efffd56e4bd894e0935eea00e437f233b6cebc0d)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Fix kernel-doc warnings on xe_vm_validation_exec():
Warning: ../drivers/gpu/drm/xe/xe_vm.h:392 expecting prototype for
xe_vm_set_validation_exec(). Prototype was for xe_vm_validation_exec()
instead
Fixes: 0131514f9789 ("drm/xe: Pass down drm_exec context to validation")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260107155401.2379127-4-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit b3a7767989e6519127ac5e0cde682c50ad587f3b)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Fix kernel-doc warnings on enum xe_late_bind_fw_id:
Warning: ../drivers/gpu/drm/xe/xe_late_bind_fw_types.h:19 cannot
understand function prototype: 'enum xe_late_bind_fw_id'
Fixes: 45832bf9c10f ("drm/xe/xe_late_bind_fw: Initialize late binding firmware")
Cc: Badal Nilawar <badal.nilawar@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patch.msgid.link/20260107155401.2379127-3-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit a857e6102970c7bd8f2db967fe02d76741179d14)
Signed-off-by: Thomas Hellströ |
