| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
HIPPI has not been relevant for over two decades. It was rapidly
eclipsed by Fibre Channel, and even when it was new, it was
confined to very high-end hardware. The HIPPI code has only
received tree-wide changes and fixes by inspection in the entire
Git history. Remove HIPPI support and the rrunner HIPPI driver,
and move the former maintainer to the CREDITS file. Keep the
include/uapi/linux/if_hippi.h header because it is used by the TUN
code, and to avoid breaking userspace, however unlikely that may be.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260119022451.22344-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The atmel_hlcdc_plane_atomic_duplicate_state() callback was copying
the atmel_hlcdc_plane state structure without properly duplicating the
drm_plane_state. In particular, state->commit remained set to the old
state commit, which can lead to a use-after-free in the next
drm_atomic_commit() call.
Fix this by calling
__drm_atomic_helper_duplicate_plane_state(), which correctly clones
the base drm_plane_state (including the ->commit pointer).
It has been seen when closing and re-opening the device node while
another DRM client (e.g. fbdev) is still attached:
=============================================================================
BUG kmalloc-64 (Not tainted): Poison overwritten
-----------------------------------------------------------------------------
0xc611b344-0xc611b344 @offset=836. First byte 0x6a instead of 0x6b
FIX kmalloc-64: Restoring Poison 0xc611b344-0xc611b344=0x6b
Allocated in drm_atomic_helper_setup_commit+0x1e8/0x7bc age=178 cpu=0
pid=29
drm_atomic_helper_setup_commit+0x1e8/0x7bc
drm_atomic_helper_commit+0x3c/0x15c
drm_atomic_commit+0xc0/0xf4
drm_framebuffer_remove+0x4cc/0x5a8
drm_mode_rmfb_work_fn+0x6c/0x80
process_one_work+0x12c/0x2cc
worker_thread+0x2a8/0x400
kthread+0xc0/0xdc
ret_from_fork+0x14/0x28
Freed in drm_atomic_helper_commit_hw_done+0x100/0x150 age=8 cpu=0
pid=169
drm_atomic_helper_commit_hw_done+0x100/0x150
drm_atomic_helper_commit_tail+0x64/0x8c
commit_tail+0x168/0x18c
drm_atomic_helper_commit+0x138/0x15c
drm_atomic_commit+0xc0/0xf4
drm_atomic_helper_set_config+0x84/0xb8
drm_mode_setcrtc+0x32c/0x810
drm_ioctl+0x20c/0x488
sys_ioctl+0x14c/0xc20
ret_fast_syscall+0x0/0x54
Slab 0xef8bc360 objects=21 used=16 fp=0xc611b7c0
flags=0x200(workingset|zone=0)
Object 0xc611b340 @offset=832 fp=0xc611b7c0
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Link: https://patch.msgid.link/20251024-lcd_fixes_mainlining-v1-2-79b615130dc3@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
|
|
After several commits, the slab memory increases. Some drm_crtc_commit
objects are not freed. The atomic_destroy_state callback only put the
framebuffer. Use the __drm_atomic_helper_plane_destroy_state() function
to put all the objects that are no longer needed.
It has been seen after hours of usage of a graphics application or using
kmemleak:
unreferenced object 0xc63a6580 (size 64):
comm "egt_basic", pid 171, jiffies 4294940784
hex dump (first 32 bytes):
40 50 34 c5 01 00 00 00 ff ff ff ff 8c 65 3a c6 @P4..........e:.
8c 65 3a c6 ff ff ff ff 98 65 3a c6 98 65 3a c6 .e:......e:..e:.
backtrace (crc c25aa925):
kmemleak_alloc+0x34/0x3c
__kmalloc_cache_noprof+0x150/0x1a4
drm_atomic_helper_setup_commit+0x1e8/0x7bc
drm_atomic_helper_commit+0x3c/0x15c
drm_atomic_commit+0xc0/0xf4
drm_atomic_helper_set_config+0x84/0xb8
drm_mode_setcrtc+0x32c/0x810
drm_ioctl+0x20c/0x488
sys_ioctl+0x14c/0xc20
ret_fast_syscall+0x0/0x54
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Link: https://patch.msgid.link/20251024-lcd_fixes_mainlining-v1-1-79b615130dc3@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
|
|
Fix misspelling of "software" as "softare" in xen-netback code comment.
Signed-off-by: Yicong Hui <yiconghui@gmail.com>
Link: https://patch.msgid.link/20260118121001.136806-4-yiconghui@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix various typos and misspellings in code comments in the
drivers/net/ethernet/micrel directory
Signed-off-by: Yicong Hui <yiconghui@gmail.com>
Link: https://patch.msgid.link/20260118121001.136806-3-yiconghui@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix various typos and misspellings in code comments in the
drivers/net/ethernet/emulex directory
Signed-off-by: Yicong Hui <yiconghui@gmail.com>
Link: https://patch.msgid.link/20260118121001.136806-2-yiconghui@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In recent testing, verification of XDP_REDIRECT and zero-copy features
failed because the driver is not setting the corresponding feature flags.
Fixes: efabce290151 ("octeontx2-pf: AF_XDP zero copy receive support")
Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20260119100222.2267925-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The usbnet driver initializes net->max_mtu to ETH_MAX_MTU before calling
the device's bind() callback. When the bind() callback sets
dev->hard_mtu based the device's actual capability (from CDC Ethernet's
wMaxSegmentSize descriptor), max_mtu is never updated to reflect this
hardware limitation).
This allows userspace (DHCP or IPv6 RA) to configure MTU larger than the
device can handle, leading to silent packet drops when the backend sends
packet exceeding the device's buffer size.
Fix this by limiting net->max_mtu to the device's hard_mtu after the
bind callback returns.
See https://gitlab.com/qemu-project/qemu/-/issues/3268 and
https://bugs.passt.top/attachment.cgi?bugid=189
Fixes: f77f0aee4da4 ("net: use core MTU range checking in USB NIC drivers")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Link: https://bugs.passt.top/show_bug.cgi?id=189
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://patch.msgid.link/20260119075518.2774373-1-lvivier@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Based on the fact that either bus_id-based matching or phy_uid-based
matching is used, the code can be simplified. PHY_ANY_ID and
PHY_ANY_UID are not needed. Ensure that phy_id_compare() is called
only if phy_uid_mask isn't zero, because a zero value would always
result in a match.
In addition change the return value type of phy_needs_fixup() to bool.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/e7394cc8-5895-4d02-a8fe-802345c7c547@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Analog connectors may be hot-plugged unlike other connector
types that don't support HPD.
Stop DRM from polling other connector types that don't
support HPD, such as eDP, LVDS, etc. These were wrongly
polled when analog connector support was added,
causing issues with the seamless boot process.
Fixes: c4f3f114e73c ("drm/amd/display: Poll analog connectors (v3)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reported-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e924c7004b08e4e173782bad60b27841d889e371)
|
|
If fence emit fails, free the fence if necessary.
Fixes: db36632ea51e ("drm/amdgpu: clean up and unify hw fence handling")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5eb680a06007f2f6ea333d11a4e29039da90614b)
|
|
Restrictions on debugging cooperative launch for GFX11 devices should
align to CWSR work around requirements.
i.e. devices without the need for the work around should not be subject
to such restrictions.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: James Zhu <james.zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 230ef3977d6ffdd498ffa9baa6f5a061786189bf)
|
|
If drm_sched_job_init fails, hw_vm_fence is not freed currently,
then cause memory leak.
Fixes: db36632ea51e ("drm/amdgpu: clean up and unify hw fence handling")
Link: https://lore.kernel.org/amd-gfx/a5a828cb-0e4a-41f0-94c3-df31e5ddad52@amd.com/T/#t
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Reviewed-by: Amos Kong <kongjianjun@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5d42ee457ccd1fb5da4c7f817825b2806ec36956)
|
|
Remove emit_frame_cntl function for gfx v12, which is not support.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5aaa5058dec5bfdcb24c42fe17ad91565a3037ca)
Cc: stable@vger.kernel.org
|
|
of_device_get_match_data()
Use of_device_get_match_data() to replace the open-coded method for
obtaining the device config.
Additionally, adjust the ordering of local variables to ensure
compatibility with RCS.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260117-macb-v1-1-f092092d8c91@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dev->work can re read locklessly in mISDN_read()
and mISDN_poll(). Add READ_ONCE()/WRITE_ONCE() annotations.
BUG: KCSAN: data-race in mISDN_ioctl / mISDN_read
write to 0xffff88812d848280 of 4 bytes by task 10864 on cpu 1:
misdn_add_timer drivers/isdn/mISDN/timerdev.c:175 [inline]
mISDN_ioctl+0x2fb/0x550 drivers/isdn/mISDN/timerdev.c:233
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl+0xce/0x140 fs/ioctl.c:583
__x64_sys_ioctl+0x43/0x50 fs/ioctl.c:583
x64_sys_call+0x14b0/0x3000 arch/x86/include/generated/asm/syscalls_64.h:17
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd8/0x2c0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
read to 0xffff88812d848280 of 4 bytes by task 10857 on cpu 0:
mISDN_read+0x1f2/0x470 drivers/isdn/mISDN/timerdev.c:112
do_loop_readv_writev fs/read_write.c:847 [inline]
vfs_readv+0x3fb/0x690 fs/read_write.c:1020
do_readv+0xe7/0x210 fs/read_write.c:1080
__do_sys_readv fs/read_write.c:1165 [inline]
__se_sys_readv fs/read_write.c:1162 [inline]
__x64_sys_readv+0x45/0x50 fs/read_write.c:1162
x64_sys_call+0x2831/0x3000 arch/x86/include/generated/asm/syscalls_64.h:20
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd8/0x2c0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
value changed: 0x00000000 -> 0x00000001
Fixes: 1b2b03f8e514 ("Add mISDN core files")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260118132528.2349573-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The industry standard jumbo frame MTU is 9216 bytes. When using the DSA
subsystem, a 4-byte tag is added to each Ethernet frame.
Increase AIROHA_MAX_MTU to 9220 bytes (9216 + 4) so that users can set a
standard 9216-byte MTU on DSA ports.
The underlying hardware supports significantly larger frame sizes
(approximately 16K). However, the maximum MTU is limited to 9220 bytes
for now, as this is sufficient to support standard jumbo frames and does
not incur additional memory allocation overhead.
Signed-off-by: Sayantan Nandy <sayantann11@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260119073658.6216-1-sayantann11@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For these two firmware mailbox commands, in txgbe_test_hostif() and
txgbe_set_phy_link_hostif(), there is no need to read data from the
buffer.
Under the current setting, OEM firmware will cause the driver to fail to
probe. Because OEM firmware returns more link information, with a larger
OEM structure txgbe_hic_ephy_getlink. However, the current driver does
not support the OEM function. So just fix it in the way that does not
involve reading the returned data.
Fixes: d84a3ff9aae8 ("net: txgbe: Restrict the use of mismatched FW versions")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/2914AB0BC6158DDA+20260119065935.6015-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use next_input_key instead of counter_id to set HCLGE_FD_AD_NXT_KEY.
Fixes: 117328680288 ("net: hns3: Add input key and action config support for flow director")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260119132840.410513-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
HCLGE_FD_AD_COUNTER_NUM_M should be at GENMASK(19, 13),
rather than at GENMASK(20, 13), because bit 20 is
HCLGE_FD_AD_NXT_STEP_B.
This patch corrects the wrong definition.
Fixes: 117328680288 ("net: hns3: Add input key and action config support for flow director")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260119132840.410513-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Tao Wang reports that sometimes, after resume, stmmac can watchdog:
NETDEV WATCHDOG: CPU: x: transmit queue x timed out xx ms
When this occurs, the DMA transmit descriptors contain:
eth0: 221 [0x0000000876d10dd0]: 0x73660cbe 0x8 0x42 0xb04416a0
eth0: 222 [0x0000000876d10de0]: 0x77731d40 0x8 0x16a0 0x90000000
where descriptor 221 is the TSO header and 222 is the TSO payload.
tdes3 for descriptor 221 (0xb04416a0) has both bit 29 (first
descriptor) and bit 28 (last descriptor) set, which is incorrect.
The following packet also has bit 28 set, but isn't marked as a
first descriptor, and this causes the transmit DMA to stall.
This occurs because stmmac_tso_allocator() populates the first
descriptor, but does not set .last_segment correctly. There are two
places where this matters: one is later in stmmac_tso_xmit() where
we use it to update the TSO header descriptor. The other is in the
ring/chain mode clean_desc3() which is a performance optimisation.
Rather than using tx_q->tx_skbuff_dma[].last_segment to determine
whether the first descriptor entry is the only segment, calculate the
number of descriptor entries used. If there is only one descriptor,
then the first is also the last, so mark it as such.
Further work will be necessary to either eliminate .last_segment
entirely or set it correctly. Code analysis also indicates that a
similar issue exists with .is_jumbo. These will be the subject of
a future patch.
Reported-by: Tao Wang <tao03.wang@horizon.auto>
Fixes: c2837423cb54 ("net: stmmac: Rework TX Coalesce logic")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vhq8O-00000005N5s-0Ke5@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In be_get_new_eqd(), statistics of pkts, protected by u64_stats_sync, are
read and accumulated in ignorance of possible u64_stats_fetch_retry()
events. Before the commit in question, these statistics were retrieved
one by one directly from queues. Fix this by reading them into temporary
variables first.
Fixes: 209477704187 ("be2net: set interrupt moderation for Skyhawk-R using EQ-DB")
Signed-off-by: David Yang <mmyangfl@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260119153440.1440578-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In idpf_net_dim(), some statistics protected by u64_stats_sync, are read
and accumulated in ignorance of possible u64_stats_fetch_retry() events.
The correct way to copy statistics is already illustrated by
idpf_add_queue_stats(). Fix this by reading them into temporary variables
first.
Fixes: c2d548cad150 ("idpf: add TX splitq napi poll support")
Fixes: 3a8845af66ed ("idpf: add RX splitq napi poll support")
Signed-off-by: David Yang <mmyangfl@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260119162720.1463859-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In hns3_fetch_stats(), ring statistics, protected by u64_stats_sync, are
read and accumulated in ignorance of possible u64_stats_fetch_retry()
events. These statistics are already accumulated by
hns3_ring_stats_update(). Fix this by reading them into a temporary
buffer first.
Fixes: b20d7fe51e0d ("net: hns3: add some statitics info to tx process")
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260119160759.1455950-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
active_fec is a 2-bit unsigned field, and thus can only have the values
0-3. So checking that it is less than 4 is unnecessary.
Simplify the code by dropping this check.
As it no longer fits well where it is, move FEC_MAX_INDEX to towards the
top of the file. And add the prefix OXT2. I believe this is more
idiomatic.
Flagged by Smatch as:
...//otx2_ethtool.c:1024 otx2_get_fecparam() warn: always true condition '(pfvf->linfo.fec < 4) => (0-3 < 4)'
No functional change intended.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20260119-oob-v1-1-a4147e75e770@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the TX queue length reaches the threshold, the netdev watchdog
immediately detects a TX queue timeout.
This patch updates the trans_start timestamp of the transmit queue
on every asynchronous USB URB submission along the transmit path,
ensuring that the network watchdog accurately reflects ongoing
transmission activity.
Signed-off-by: Mingj Ye <insyelu@gmail.com>
Reviewed-by: Hayes Wang <hayeswang@realtek.com>
Link: https://patch.msgid.link/20260120015949.84996-1-insyelu@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After commit d228ece36345 ("clk: divider: remove round_rate() in favor
of determine_rate()") determining GFX3D clock rate crashes, because the
passed parent map doesn't provide the expected best_parent_hw clock
(with the roundd_rate path before the offending commit the
best_parent_hw was ignored).
Set the field in parent_req in addition to setting it in the req,
fixing the crash.
clk_hw_round_rate (drivers/clk/clk.c:1764) (P)
clk_divider_bestdiv (drivers/clk/clk-divider.c:336)
divider_determine_rate (drivers/clk/clk-divider.c:358)
clk_alpha_pll_postdiv_determine_rate (drivers/clk/qcom/clk-alpha-pll.c:1275)
clk_core_determine_round_nolock (drivers/clk/clk.c:1606)
clk_core_round_rate_nolock (drivers/clk/clk.c:1701)
__clk_determine_rate (drivers/clk/clk.c:1741)
clk_gfx3d_determine_rate (drivers/clk/qcom/clk-rcg2.c:1268)
clk_core_determine_round_nolock (drivers/clk/clk.c:1606)
clk_core_round_rate_nolock (drivers/clk/clk.c:1701)
clk_core_round_rate_nolock (drivers/clk/clk.c:1710)
clk_round_rate (drivers/clk/clk.c:1804)
dev_pm_opp_set_rate (drivers/opp/core.c:1440 (discriminator 1))
msm_devfreq_target (drivers/gpu/drm/msm/msm_gpu_devfreq.c:51)
devfreq_set_target (drivers/devfreq/devfreq.c:360)
devfreq_update_target (drivers/devfreq/devfreq.c:426)
devfreq_monitor (drivers/devfreq/devfreq.c:458)
process_one_work (arch/arm64/include/asm/jump_label.h:36 include/trace/events/workqueue.h:110 kernel/workqueue.c:3284)
worker_thread (kernel/workqueue.c:3356 (discriminator 2) kernel/workqueue.c:3443 (discriminator 2))
kthread (kernel/kthread.c:467)
ret_from_fork (arch/arm64/kernel/entry.S:861)
Fixes: 55213e1acec9 ("clk: qcom: Add gfx3d ping-pong PLL frequency switching")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20260117-db820-fix-gfx3d-v1-1-0f8894d71d63@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
With all drivers converted to use ndo_hwstamp callbacks the legacy way
can be removed, marking ioctl interface as deprecated.
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260116062121.1230184-1-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While waiting for completions on read requests, driver is using
different timeout values for different messages. Make use of a single
timeout value.
Introduce a wrapper function to handle the wait, which also simplify
maintaining the 80 char line limit.
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20260115003353.4150771-6-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver retries sensor read requests from firmware, but this is
unnecessary. A functioning firmware should respond to each request
within the timeout period. Remove the retry logic and set the timeout
to the sum of all retry timeouts.
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20260115003353.4150771-5-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the RX mailbox frees and reallocates a page for each received
message. Since FW Rx messages are processed synchronously, and nothing
hold these pages (unlike skbs which we hand over to the stack), reuse
the pages and put them back on the Rx ring. Now that we ensure the ring
is always fully populated we don't have to worry about filling it up
after partial population during init, either. Update
fbnic_mbx_process_rx_msgs() to recycle pages after message processing.
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20260115003353.4150771-4-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that memory is allocated with GFP_KERNEL, allocation failures
should be extremely rare. Ensure the FW communication ring is
always fully populated with free pages, and hard fail initialization
otherwise. This enables simplifications in next patches.
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20260115003353.4150771-3-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace GFP_ATOMIC with GFP_KERNEL for mailbox RX page allocation. Since
interrupt handler is threaded GFP_KERNEL is a safe option to reduce
allocation failures.
Also remove __GFP_NOWARN so the kernel reports a warning on allocation
failure to aid debugging.
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20260115003353.4150771-2-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pavel Begunkov says:
====================
Add support for providers with large rx buffer
Many modern NICs support configurable receive buffer lengths, and zcrx and
memory providers can use buffers larger than 4K to improve performance.
When paired with hw-gro larger rx buffer sizes can drastically reduce
the number of buffers traversing the stack and save a lot of processing
time. It also allows to give to users larger contiguous chunks of data.
Single stream benchmarks showed up to ~30% CPU util improvement.
E.g. comparison for 4K vs 32K buffers using a 200Gbit NIC:
packets=23987040 (MB=2745098), rps=199559 (MB/s=22837)
CPU %usr %nice %sys %iowait %irq %soft %idle
0 1.53 0.00 27.78 2.72 1.31 66.45 0.22
packets=24078368 (MB=2755550), rps=200319 (MB/s=22924)
CPU %usr %nice %sys %iowait %irq %soft %idle
0 0.69 0.00 8.26 31.65 1.83 57.00 0.57
This series adds net infrastructure for memory providers configuring
the size and implements it for bnxt. It's an opt-in feature for drivers,
they should advertise support for the parameter in the qops and must check
if the hardware supports the given size. It's limited to memory providers
as it drastically simplifies implementation. It doesn't affect the fast
path zcrx uAPI, and the user exposed parameter is defined in zcrx terms,
which allows it to be flexible and adjusted in the future.
A liburing example can be found at [2]
full branch:
[1] https://github.com/isilence/linux.git zcrx/large-buffers-v8
Liburing example:
[2] https://github.com/isilence/liburing.git zcrx/rx-buf-len
* tag 'net-queue-rx-buf-len-v9' of https://github.com/isilence/linux:
io_uring/zcrx: document area chunking parameter
selftests: iou-zcrx: test large chunk sizes
eth: bnxt: support qcfg provided rx page size
eth: bnxt: adjust the fill level of agg queues with larger buffers
eth: bnxt: store rx buffer size per queue
net: pass queue rx page size from memory provider
net: add bare bone queue configs
net: reduce indent of struct netdev_queue_mgmt_ops members
net: memzero mp params when closing a queue
====================
Link: https://patch.msgid.link/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 77b9c4a438fc66e2ab004c411056b3fb71a54f2c, reversing
changes made to 4515ec4ad58a37e70a9e1256c0b993958c9b7497:
931420a2fc36 ("selftests/net: Add netkit container tests")
ab771c938d9a ("selftests/net: Make NetDrvContEnv support queue leasing")
6be87fbb2776 ("selftests/net: Add env for container based tests")
61d99ce3dfc2 ("selftests/net: Add bpf skb forwarding program")
920da3634194 ("netkit: Add xsk support for af_xdp applications")
eef51113f8af ("netkit: Add netkit notifier to check for unregistering devices")
b5ef109d22d4 ("netkit: Implement rtnl_link_ops->alloc and ndo_queue_create")
b5c3fa4a0b16 ("netkit: Add single device mode for netkit")
0073d2fd679d ("xsk: Proxy pool management for leased queues")
1ecea95dd3b5 ("xsk: Extend xsk_rcv_check validation")
804bf334d08a ("net: Proxy netdev_queue_get_dma_dev for leased queues")
0caa9a8ddec3 ("net: Proxy net_mp_{open,close}_rxq for leased queues")
ff8889ff9107 ("net, ethtool: Disallow leased real rxqs to be resized")
9e2103f36110 ("net: Add lease info to queue-get response")
31127deddef4 ("net: Implement netdev_nl_queue_create_doit")
a5546e18f77c ("net: Add queue-create operation")
The series will conflict with io_uring work, and the code needs more
polish.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove extern declaration of bpf_wq_set_callback_impl() from
hid_bpf_helpers.h and replace bpf_wq_set_callback macro with a
corresponding new declaration.
Tested with:
# append tools/testing/selftests/hid/config and build the kernel
$ make -C tools/testing/selftests/hid
# in built kernel
$ ./tools/testing/selftests/hid/hid_bpf -t test_multiply_events_wq
TAP version 13
1..1
# Starting 1 tests from 1 test cases.
# RUN hid_bpf.test_multiply_events_wq ...
[ 2.575520] hid-generic 0003:0001:0A36.0001: hidraw0: USB HID v0.00 Device [test-uhid-device-138] on 138
# OK hid_bpf.test_multiply_events_wq
ok 1 hid_bpf.test_multiply_events_wq
# PASSED: 1 / 1 tests passed.
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
PASS
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260120222638.3976562-9-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
An (admittedly problematic) optimization change in LLVM 20 [1] turns
known division by zero into the equivalent of __builtin_unreachable(),
which invokes undefined behavior if it is encountered in a control flow
graph, destroying code generation. When compile testing for x86_64,
objtool flags an instance of this optimization triggering in
msm_dp_ctrl_config_msa(), inlined into msm_dp_ctrl_on_stream():
drivers/gpu/drm/msm/msm.o: warning: objtool: msm_dp_ctrl_on_stream(): unexpected end of section .text.msm_dp_ctrl_on_stream
The zero division happens if the else branch in the first if statement
in msm_dp_ctrl_config_msa() is taken because pixel_div is initialized to
zero and it is not possible for LLVM to eliminate the else branch since
rate is still not known after inlining into msm_dp_ctrl_on_stream().
Transform the if statements into a switch statement with a default case
with the existing error print and an early return to avoid the invalid
division. Add a comment to note this helps the compiler, even though the
case is known to be unreachable. With this, pixel_dev's default zero
initialization can be dropped, as it is dead with this change.
Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Link: https://github.com/llvm/llvm-project/commit/37932643abab699e8bb1def08b7eb4eae7ff1448 [1]
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601081959.9UVJEOfP-lkp@intel.com/
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/698355/
Link: https://lore.kernel.org/r/20260113-drm-msm-dp_ctrl-avoid-zero-div-v2-1-f1aa67bf6e8e@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
On most of the platforms only some mixers have connected DSPP blocks.
If DSPP is not required for the CRTC, try looking for the LM with no
DSSP block, leaving DSPP-enabled LMs to CRTCs which actually require
those.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/698773/
Link: https://lore.kernel.org/r/20260115-dpu-fix-dspp-v1-2-b73152c147b3@oss.qualcomm.com
|
|
Some of error messages in RM reference block index, while other print
the enum value (which is shifted by 1), not to mention that some of the
messages are misleading. Reformat the messages, making them more clear
and also always printing the hardware block name.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/698774/
Link: https://lore.kernel.org/r/20260115-dpu-fix-dspp-v1-1-b73152c147b3@oss.qualcomm.com
|
|
Add support for Display Processing Unit (DPU) version 13.0
on the Kaanapali platform. This version introduces changes
to the SSPP sub-block structure. Add common block and rectangle
blocks to accommodate these structural modifications for
compatibility.
Co-developed-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Yuanjie Yang <yuanjie.yang@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/698716/
Link: https://lore.kernel.org/r/20260115092749.533-13-yuanjie.yang@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Add support for Kaanapali WB, which introduce register
relocations, use the updated registeri definition to ensure
compatibility.
Co-developed-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Yuanjie Yang <yuanjie.yang@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/698715/
Link: https://lore.kernel.org/r/20260115092749.533-12-yuanjie.yang@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Add support for Kaanapali platform SSPP sub-blocks, which
introduce structural changes including register additions,
removals, and relocations. Add the new common and rectangle
blocks, and update register definitions and handling to
ensure compatibility with DPU v13.0.
Co-developed-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Signed-off-by: Yuanjie Yang <yuanjie.yang@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/698712/
Link: https://lore.kernel.org/r/20260115092749.533-11-yuanjie.yang@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
DPU version 13.0.0 introduces structural changes including
register additions, removals, and relocations.
Refactor SSPP-related code to be compatible with DPU 13.0.0
modifications.
Co-developed-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Yuanjie Yang <yuanjie.yang@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/698710/
Link: https://lore.kernel.org/r/20260115092749.533-10-yuanjie.yang@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
DPU version 13.0.0 introduces changes to the interrupt register
layout. Update the driver to support these modifications for
proper interrupt handling.
Co-developed-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Yuanjie Yang <yuanjie.yang@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/698708/
Link: https://lore.kernel.org/r/20260115092749.533-9-yuanjie.yang@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Add DSI Controller version 2.10.0 support for DSI on Qualcomm
Kaanapali SoC.
Co-developed-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Yuanjie Yang <yuanjie.yang@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/698707/
Link: https://lore.kernel.org/r/20260115092749.533-8-yuanjie.yang@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Add DSI PHY support for the Kaanapali platform, Kaanapali introduce
addition of DSI2/DSI2_phy compared to SM8650. However, based on the
HPG diagram, only DSI0_phy and DSI1_phy works.
Co-developed-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Yuanjie Yang <yuanjie.yang@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/698705/
Link: https://lore.kernel.org/r/20260115092749.533-7-yuanjie.yang@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Add mdss support for the Qualcomm Kaanapali platform.
Co-developed-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Yuanjie Yang <yuanjie.yang@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/698703/
Link: https://lore.kernel.org/r/20260115092749.533-6-yuanjie.yang@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Code in dpu_hw_sspp_setup_format() doesn't handle UBWC versions bigger
than 4.0. Replace switch-case with if-else checks, making sure that the
register is initialized on UBWC 5.x (and later) hosts.
Fixes: c2577fc1740d ("drm/msm/dpu: Add support for SM8750")
Tested-by: Val Packett <val@packett.cool> # x1e80100-dell-latitude-7455
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/699280/
Link: https://lore.kernel.org/r/20260119-msm-ubwc-fixes-v4-4-0987acc0427f@oss.qualcomm.com
|
|
Since DPU 8.0 there is a separate register for the second rectangle,
which needs to be programmed with the UBWC config if multirect is being
used. Write pipe's UBWC configuration to the correct register.
Fixes: 100d7ef6995d ("drm/msm/dpu: add support for SM8450")
Tested-by: Val Packett <val@packett.cool> # x1e80100-dell-latitude-7455
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/699277/
Link: https://lore.kernel.org/r/20260119-msm-ubwc-fixes-v4-3-0987acc0427f@oss.qualcomm.com
|
|
As in all other places, the Highest Bank Bit value should be programmed
into the hardware with the offset of -13. Correct the value written
into the register to prevent unpredictable results.
Fixes: 227d4ce0b09e ("drm/msm: Offset MDSS HBB value by 13")
Tested-by: Val Packett <val@packett.cool> # x1e80100-dell-latitude-7455
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/699276/
Link: https://lore.kernel.org/r/20260119-msm-ubwc-fixes-v4-2-0987acc0427f@oss.qualcomm.com
|
