| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Use the newly introduced .get_rx_ring_count ethtool ops callback instead
of handling ETHTOOL_GRXRINGS directly in .get_rxnfc().
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20260122-grxring_big_v4-v2-8-94dbe4dcaa10@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the newly introduced .get_rx_ring_count ethtool ops callback instead
of handling ETHTOOL_GRXRINGS directly in .get_rxnfc().
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20260122-grxring_big_v4-v2-7-94dbe4dcaa10@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the newly introduced .get_rx_ring_count ethtool ops callback instead
of handling ETHTOOL_GRXRINGS directly in .get_rxnfc().
Since ETHTOOL_GRXRINGS was the only command handled by ionic_get_rxnfc(),
remove the function entirely.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20260122-grxring_big_v4-v2-6-94dbe4dcaa10@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the newly introduced .get_rx_ring_count ethtool ops callback instead
of handling ETHTOOL_GRXRINGS directly in .get_rxnfc().
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20260122-grxring_big_v4-v2-5-94dbe4dcaa10@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the newly introduced .get_rx_ring_count ethtool ops callback instead
of handling ETHTOOL_GRXRINGS directly in .get_rxnfc().
Since ETHTOOL_GRXRINGS was the only command handled by mana_get_rxnfc(),
remove the function entirely.
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20260122-grxring_big_v4-v2-4-94dbe4dcaa10@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the newly introduced .get_rx_ring_count ethtool ops callback instead
of handling ETHTOOL_GRXRINGS directly in .get_rxnfc().
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20260122-grxring_big_v4-v2-3-94dbe4dcaa10@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the newly introduced .get_rx_ring_count ethtool ops callback instead
of handling ETHTOOL_GRXRINGS directly in .get_rxnfc().
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20260122-grxring_big_v4-v2-2-94dbe4dcaa10@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the newly introduced .get_rx_ring_count ethtool ops callback instead
of handling ETHTOOL_GRXRINGS directly in .get_rxnfc().
Since ETHTOOL_GRXRINGS was the only command handled by be_get_rxnfc(),
remove the function entirely.
Since the be_multi_rxq() check in be_get_rxnfc() previously blocked RSS
configuration on single-queue setups (via ethtool core validation), add
an equivalent check to be_set_rxfh() to preserve this behavior, as
suggested by Jakub.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20260122-grxring_big_v4-v2-1-94dbe4dcaa10@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We are not deregistering the fixed phy link when hitting the early
exit condition. Add the correct early exit sequence.
Fixes: 490cb412007d ("net: bcmasp: Add support for ASP2.0 Ethernet controller")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260122194001.1098859-1-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_uart: fix null-ptr-deref in hci_uart_write_work
- MGMT: Fix memory leak in set_ssp_complete
* tag 'for-net-2026-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: MGMT: Fix memory leak in set_ssp_complete
Bluetooth: hci_uart: fix null-ptr-deref in hci_uart_write_work
====================
Link: https://patch.msgid.link/20260122200751.2950279-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
PMIC arbiter v8 supports up to 4 SPMI buses and up to 8192 PMIC
peripherals. Its register map differs from v7 as several fields
increased in size. Add support for PMIC arbiter version 8.
Signed-off-by: David Collins <david.collins@oss.qualcomm.com>
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://patch.msgid.link/20260123182039.224314-10-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,spmi" anymore [1]. Use
"apple,t8103-spmi" as base compatible as it is the SoC the driver and
bindings were written for.
[1]: https://lore.kernel.org/asahi/12ab93b7-1fc2-4ce0-926e-c8141cfe81bf@kernel.org/
Fixes: 77ca75e80c71 ("spmi: add a spmi driver for Apple SoC")
Cc: stable@vger.kernel.org
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://patch.msgid.link/20260123182039.224314-7-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for the SPMI controller found in the MT8196 SoC:
this supports SPMI 2.0 and features two SPMI buses.
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://patch.msgid.link/20260123182039.224314-6-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for the per-bus RCS interrupt by adding a new linear
irqdomain and its irqchip.
The SPMI controller will raise an interrupt when any of the SPMI
connected devices' irq needs attention (whenever any interrupt
fires on any SID) in one of four registers, where each register
holds four sets of four bits of information about a SID interrupt.
This controller's RCS interrupt status knowledge is limited to the
address of the SID that raised an interrupt, but does not have any
details about the devices irq numbers: as this may change with a
future SPMI controller IP version, the devicetree is meant to hold
three cells, where the first one is the SPMI SID interrupt number,
the second one is a device interrupt number, and the third one is
the irq sense type.
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://patch.msgid.link/20260123182039.224314-5-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move the spin unlocking to after reading the contents of the
PMIF_SWINF_(x)_RDATA_31_0 register in pmif_spmi_read_cmd():
since this is the only register that we can read to get the
data from all of the arbitered busses, a concurrent request
for reading (especially on a busy arbiter) will show a race
condition and a unexpected or corrupted value may be read.
Doing the entire read sequence while spin locked guarantees
that concurrent access to the arbiter doesn't happen.
Fixes: f200fff8d019 ("spmi: mtk-pmif: Serialize PMIF status check and command submission")
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Fixes: b45b3ccef8c0 ("spmi: mediatek: Add support for MT6873/8192")
Link: https://patch.msgid.link/20260123182039.224314-4-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In preparation for adding support for MT8196/MT6991 SoCs having
multiple SPMI busses, move the bus specific parameters into a new
pmif_bus structure and keep the SoC-specific data in the already
existing struct pmif, and add means to register multiple SPMI
controllers.
While this needs a different devicetree node structure, where each
of the controllers are in subnodes of a main SPMI node, and where
each has its own resources (iospaces and clocks), support for the
legacy single-controller was retained and doesn't require any DT
change in the currently supported SoCs.
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://patch.msgid.link/20260123182039.224314-3-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"One new device ID, plus a few fixes.
The most substantial of the fixes is for the Cadence driver which in
at least some instantiations requires transmit data to drive data
through the IP"
* tag 'spi-fix-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: intel-pci: Add support for Nova Lake SPI serial flash
spi: spi-cadence: enable SPI_CONTROLLER_MUST_TX
spi: hisi-kunpeng: Fixed the wrong debugfs node name in hisi_spi debugfs initialization
spi: spi-sprd-adi: Fix double free in probe error path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"A trivial fix adding a missing memory allocation check"
* tag 'regulator-fix-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: fp9931: Add missing memory allocation check
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"A couple of small fixes, one error handling one and another for misuse
of the hwspinlock API"
* tag 'regmap-fix-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Fix race condition in hwspinlock irqsave routine
regmap: maple: free entry on mas_store_gfp() failure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Some fixes to resource leaks in the character device handling and
another small fix for shared GPIO management:
- fix resource leaks in error paths in GPIO character device code
- return -ENOMEM and not -ENODEV on memory allocation failure
- fix an audio issue on Qualcomm platforms due to configuration not
being propagated to pinctrl from shared GPIO proxy"
* tag 'gpio-fixes-for-v6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: shared: propagate configuration to pinctrl
gpio: cdev: Fix resource leaks on errors in gpiolib_cdev_register()
gpio: cdev: Fix resource leaks on errors in lineinfo_changed_notify()
gpio: cdev: Correct return code on memory allocation failure
|
|
Sinc commit 79a6d1bfe114 ("can: gs_usb: gs_usb_receive_bulk_callback():
unanchor URL on usb_submit_urb() error") a failing resubmit URB will print
an info message.
In the case of a short read where netdev has not yet been assigned,
initialize as NULL to avoid dereferencing an undefined value. Also report
the error value of the failed resubmit.
Fixes: 79a6d1bfe114 ("can: gs_usb: gs_usb_receive_bulk_callback(): unanchor URL on usb_submit_urb() error")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/all/20260119181904.1209979-1-kuba@kernel.org/
Link: https://patch.msgid.link/20260120-gs_usb-fix-error-message-v1-1-6be04de572bc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Pull drm fixes from Dave Airlie:
"Probably a good thing you decided to do an rc8 in this round. Nothing
stands out, but xe/amdgpu and mediatek all have a bunch of fixes, and
then there are a few other single patches. Hopefully next week is
calmer for release.
xe:
- Disallow bind-queue sharing across multiple VMs
- Fix xe userptr in the absence of CONFIG_DEVICE_PRIVATE
- Fix a missed page count update
- Fix a confused argument to alloc_workqueue()
- Kernel-doc fixes
- Disable a workaround on VFs
- Fix a job lock assert
- Update wedged.mode only after successful reset policy change
- Select CONFIG_DEVICE_PRIVATE when DRM_XE_GPUSVM is selected
amdgpu:
- fix color pipeline string leak
- GC 12 fix
- Misc error path fixes
- DC analog fix
- SMU 6 fixes
- TLB flush fix
- DC idle optimization fix
amdkfd:
- GC 11 cooperative launch fix
imagination:
- sync wait for logtype update completion to ensure FW trace
is available
bridge/synopsis:
- Fix error paths in dw_dp_bind
nouveau:
- Add and implement missing DSB connector types, and improve
unknown connector handling
- Set missing atomic function ops
intel:
- place 3D lut at correct place in pipeline
- fix color pipeline string leak
vkms:
- fix color pipeline string leak
mediatek:
- Fix platform_get_irq() error checking
- HDMI DDC v2 driver fixes
- dpi: Find next bridge during probe
- mtk_gem: Partial refactor and use drm_gem_dma_object
- dt-bindings: Fix typo 'hardwares' to 'hardware'"
* tag 'drm-fixes-2026-01-23' of https://gitlab.freedesktop.org/drm/kernel: (38 commits)
Revert "drm/amd/display: pause the workload setting in dm"
drm/xe: Select CONFIG_DEVICE_PRIVATE when DRM_XE_GPUSVM is selected
drm, drm/xe: Fix xe userptr in the absence of CONFIG_DEVICE_PRIVATE
drm/i915/display: Fix color pipeline enum name leak
drm/vkms: Fix color pipeline enum name leak
drm/amd/display: Fix color pipeline enum name leak
drm/i915/color: Place 3D LUT after CSC in plane color pipeline
drm/nouveau/disp: Set drm_mode_config_funcs.atomic_(check|commit)
drm/nouveau: implement missing DCB connector types; gracefully handle unknown connectors
drm/nouveau: add missing DCB connector types
drm/amdgpu: fix type for wptr in ring backup
drm/amdgpu: Fix validating flush_gpu_tlb_pasid()
drm/amd/pm: Workaround SI powertune issue on Radeon 430 (v2)
drm/amd/pm: Don't clear SI SMC table when setting power limit
drm/amd/pm: Fix si_dpm mmCG_THERMAL_INT setting
drm/xe: Update wedged.mode only after successful reset policy change
drm/xe/migrate: fix job lock assert
drm/xe/uapi: disallow bind queue sharing
drm/amd/display: Only poll analog connectors
drm/amdgpu: fix error handling in ib_schedule()
...
|
|
On the embedded platform, certain critical data, such as IMU data, is
transmitted through UART. The tty_flip_buffer_push() interface in the TTY
layer uses system_dfl_wq to handle the flipping of the TTY buffer.
Although the unbound workqueue can create new threads on demand and wake
up the kworker thread on an idle CPU, it may be preempted by real-time
tasks or other high-prio tasks.
flush_to_ldisc() needs to wake up the relevant data handle thread. When
executing __wake_up_common_lock(), it calls spin_lock_irqsave(), which
does not disable preemption but disables migration in RT-Linux. This
prevents the kworker thread from being migrated to other cores by CPU's
balancing logic, resulting in long delays. The call trace is as follows:
__wake_up_common_lock
__wake_up
ep_poll_callback
__wake_up_common
__wake_up_common_lock
__wake_up
n_tty_receive_buf_common
n_tty_receive_buf2
tty_ldisc_receive_buf
tty_port_default_receive_buf
flush_to_ldisc
In our system, the processing interval for each frame of IMU data
transmitted via UART can experience significant jitter due to this issue.
Instead of the expected 10 to 15 ms frame processing interval, we see
spikes up to 30 to 35 ms. Moreover, in just one or two hours, there can
be 2 to 3 occurrences of such high jitter, which is quite frequent. This
jitter exceeds the software's tolerable limit of 20 ms.
Introduce flip_wq in tty_port which can be set by tty_port_link_wq() or as
default linked to default workqueue allocated when tty_register_driver().
The default workqueue is allocated with flag WQ_SYSFS, so that cpumask and
nice can be set dynamically. The execution timing of tty_port_link_wq() is
not clearly restricted. The newly added function tty_port_link_driver_wq()
checks whether the flip_wq of the tty_port has already been assigned when
linking the default tty_driver's workqueue to the port. After the user has
set a custom workqueue for a certain tty_port using tty_port_link_wq(), the
system will only use this custom workqueue, even if tty_driver does not
have %TTY_DRIVER_CUSTOM_WORKQUEUE flag.
Introduce %TTY_DRIVER_CUSTOM_WORKQUEUE flag meaning not to create the
default single tty_driver workqueue. Two reasons why need to introduce the
%TTY_DRIVER_CUSTOM_WORKQUEUE flag:
1. If the WQ_SYSFS parameter is enabled, workqueue_sysfs_register() will
fail when trying to create a workqueue with the same name. The pty is an
example of this; if both CONFIG_LEGACY_PTYS and CONFIG_UNIX98_PTYS are
enabled, the call to tty_register_driver() in unix98_pty_init() will fail.
2. Different tty ports may be used for different tasks, which may require
separate core binding control via workqueues. In this case, the workqueue
created by default in the tty driver is unnecessary. Enabling this flag
prevents the creation of this redundant workqueue.
After applying this patch, we can set the related UART TTY flip buffer
workqueue by sysfs. We set the cpumask to CPU cores associated with the
IMU tasks, and set the nice to -20. Testing has shown significant
improvement in the previously described issue, with almost no stuttering
occurring anymore.
Signed-off-by: Xin Zhao <jackzxcui1989@163.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://patch.msgid.link/20251223034836.2625547-1-jackzxcui1989@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As comments mentioned this is old (and actually deprecated) interface
to set custom baud rates. This interface has limitations as it only
allows to set a single opaque value called "custom_divisor". If the HW
needs more complex settings (like fractional divisor) it must somehow
encode this. This is horrid interface that is very driver specific
and not flexible. Meanwhile Linux has established way to set free
baud rate settings via BOTHER [1]. With all this being said, remove
deprecated interface for good.
Link: https://stackoverflow.com/questions/12646324/how-can-i-set-a-custom-baud-rate-on-linux [1]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260122102349.2395423-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As comments mentioned this is old (and actually deprecated) interface
to set custom baud rates. This interface has limitations as it only
allows to set a single opaque value called "custom_divisor". If the HW
needs more complex settings (like fractional divisor) it must somehow
encode this. This is horrid interface that is very driver specific
and not flexible. Meanwhile Linux has established way to set free
baud rate settings via BOTHER [1]. With all this being said, remove
deprecated interface for good.
Link: https://stackoverflow.com/questions/12646324/how-can-i-set-a-custom-baud-rate-on-linux [1]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260122102349.2395423-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In TI K3 SoCs, I/O daisy chaining is used to allow wakeup from UART when the
UART controller is off. Set UART device as wakeup capable using out-of-band
wakeup if the 'wakeup' pinctrl state exists and the device may wakeup.
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Kendall Willis <k-willis@ti.com>
Link: https://patch.msgid.link/20260116-uart-wakeup-v2-1-0078ae9996e4@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Revert commit bfc467db60b7 ("serial: remove redundant
tty_port_link_device()") because the tty_port_link_device() is not
redundant: the tty->port has to be confured before we call
uart_configure_port(), otherwise user-space can open console without TTY
linked to the driver.
This tty_port_link_device() was added explicitly to avoid this exact
issue in commit fb2b90014d78 ("tty: link tty and port before configuring
it as console"), so offending commit basically reverted the fix saying
it is redundant without addressing the actual race condition presented
there.
Reproducible always as tty->port warning on Qualcomm SoC with most of
devices disabled, so with very fast boot, and one serial device being
the console:
printk: legacy console [ttyMSM0] enabled
printk: legacy console [ttyMSM0] enabled
printk: legacy bootconsole [qcom_geni0] disabled
printk: legacy bootconsole [qcom_geni0] disabled
------------[ cut here ]------------
tty_init_dev: ttyMSM driver does not set tty->port. This would crash the kernel. Fix the driver!
WARNING: drivers/tty/tty_io.c:1414 at tty_init_dev.part.0+0x228/0x25c, CPU#2: systemd/1
Modules linked in: socinfo tcsrcc_eliza gcc_eliza sm3_ce fuse ipv6
CPU: 2 UID: 0 PID: 1 Comm: systemd Tainted: G S 6.19.0-rc4-next-20260108-00024-g2202f4d30aa8 #73 PREEMPT
Tainted: [S]=CPU_OUT_OF_SPEC
Hardware name: Qualcomm Technologies, Inc. Eliza (DT)
...
tty_init_dev.part.0 (drivers/tty/tty_io.c:1414 (discriminator 11)) (P)
tty_open (arch/arm64/include/asm/atomic_ll_sc.h:95 (discriminator 3) drivers/tty/tty_io.c:2073 (discriminator 3) drivers/tty/tty_io.c:2120 (discriminator 3))
chrdev_open (fs/char_dev.c:411)
do_dentry_open (fs/open.c:962)
vfs_open (fs/open.c:1094)
do_open (fs/namei.c:4634)
path_openat (fs/namei.c:4793)
do_filp_open (fs/namei.c:4820)
do_sys_openat2 (fs/open.c:1391 (discriminator 3))
...
Starting Network Name Resolution...
Apparently the flow with this small Yocto-based ramdisk user-space is:
driver (qcom_geni_serial.c): user-space:
============================ ===========
qcom_geni_serial_probe()
uart_add_one_port()
serial_core_register_port()
serial_core_add_one_port()
uart_configure_port()
register_console()
|
| open console
| ...
| tty_init_dev()
| driver->ports[idx] is NULL
|
tty_port_register_device_attr_serdev()
tty_port_link_device() <- set driver->ports[idx]
Fixes: bfc467db60b7 ("serial: remove redundant tty_port_link_device()")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://patch.msgid.link/20260123072139.53293-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for HSIC USB mode, which can be set for second USB controller
and PHY on Tegra SoC along with already supported UTMI or ULPI.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://patch.msgid.link/20260122151125.7367-3-clamor95@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Refactor to directly use enum usb_phy_interface to determine the PHY mode.
This change is in preparation for adding support for HSIC mode.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://patch.msgid.link/20260122151125.7367-2-clamor95@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The mode selection sequence is initiated by the driver after all partner
alternate modes have been successfully registered.
When a partner is disconnected, the driver also stops the mode selection
process and releases resources via `typec_mode_selection_delete`.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260119131824.2529334-8-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If the ucsi port driver supports modes selection, it should implement
`add_partner_altmodes` and `remove_partner_altmodes` ucsi operations. With
these operations the driver can manage the mode selection process.
Once partner altmodes are registered, `add_partner_altmodes` is called to
start the mode selection. When the partner is unregistered,
`remove_partner_altmodes` is supposed to stop any ongoing processes and
clean up the resources.
`typec_altmode_state_update` informes mode selection about the current mode
of the Type-C connector.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260119131824.2529334-7-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The port driver sets this bit for an alternate mode description to indicate
support for the mode selection feature. Once set, individual Alt Mode
drivers will no longer attempt to activate their respective modes within
their probe functions. This prevents race conditions and non-prioritized
activation.
The bit is not set by default. If left unset, the system retains the
current behavior where Alt Mode drivers manage their own activation logic.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260119131824.2529334-6-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The mode selection process is controlled by the following API functions,
which allow to initiate and complete mode entry based on the priority of
each mode:
`typec_mode_selection_start` function compiles a priority list of supported
Alternate Modes.
`typec_altmode_state_update` function is invoked by the port driver to
communicate the current mode of the Type-C connector.
`typec_mode_selection_delete` function stops the currently running mode
selection process and releases all associated system resources.
`mode_selection_work_fn` task attempts to activate modes. The process stops
on success; otherwise, it proceeds to the next mode after a timeout or
error.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260119131824.2529334-5-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch introduces a priority sysfs attribute to the USB Type-C
alternate mode port interface. This new attribute allows user-space to
configure the numeric priority of alternate modes managing their preferred
order of operation. If a new priority value conflicts with an existing
mode's priority, the priorities of the conflicting mode and all subsequent
modes are automatically incremented to ensure uniqueness.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260119131824.2529334-4-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This flag specifies that the Embedded Controller (EC) must receive explicit
approval from the Application Processor (AP) before initiating Type-C
alternate modes or USB4 mode.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://patch.msgid.link/20260119131824.2529334-3-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This new field in the port properties dictates whether the Platform Policy
Manager (PPM) allows the OS Policy Manager (OPM) to change the currently
active, negotiated alternate mode.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://patch.msgid.link/20260119131824.2529334-2-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert from OF properties to device properties, to make the driver more
generic and simpler.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/e69adff1d6ca7b26cd2a4117d45392e05470d27c.1769004444.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the remaining error handling in the probe path to use the
dev_err_probe() helper, to make sure error messages and codes are not
missed, and recorded properly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/68739eb048a394fe9198080e4e57503bb2fb9b64.1769004444.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The generic USB PHY driver uses the existence of the "clocks" property
to see if a clock is optional or not. Use devm_clk_get_optional()
instead, which exists for this purpose. As usb_phy_generic.clk is now
either a valid clock pointer or NULL, and all clock operations handle
NULL pointers gracefully, several IS_ERR() checks can be removed,
simplifying the code.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
...
Link: https://patch.msgid.link/5cc21d821edf5d40f56a74cd251bb1b982876b72.1769004444.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
usb_phy_generic_probe() already has a "dev" variable that serves as a
shorthand for "&pdev->dev". Use it where appropriate, to shorten the
code.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/df4ce4bac088f0a4703dd8a3d1255b9072c0b8c6.1769004444.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
stub_complete() prints informational messages for each urb unlink
filling dmesg. Change the message to dev_dbg() similar to vhci
reports the CONNRESET condition.
Reported-by: Ignacio Hernandez-Ros <ignacio@hernandez-ros.com>
Closes: https://lore.kernel.org/all/0101019b92e81c20-09906fb4-d5e8-40a6-9192-ab693eef4179-000000@us-west-2.amazonses.com/
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/20260121225157.34635-1-skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
bdc_run() can be ran during atomic context leading to a sleep during
atomic warning. Fix this by replacing read_poll_timeout() with
read_poll_timeout_atomic().
Fixes: 75ae051efc9b ("usb: gadget: bdc: use readl_poll_timeout() to simplify code")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260120200754.2488765-1-justin.chen@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add dbc_manufacturer sysfs attribute to allow changing the manufacturer
description presented by the debug device when a host requests a string
descriptor with iManufacturer index.
Value can only be changed while debug capability (DbC) is in disabled
state to prevent USB device descriptor change while connected to a USB
host.
The default value is "Linux Foundation".
The string length can be from 1 to 126 characters.
String is terminated at null or newline, driver does not support empty
string.
[ mn: Improve commit message and sysfs entry documentation ]
Signed-off-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260120181148.128712-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add dbc_product sysfs attribute to allow changing the product description
presented by the debug device when a host requests a string descriptor
with iProduct index.
Value can only be changed while debug capability (DbC) is in disabled
state to prevent USB device descriptor change while connected to a USB
host.
The default value is "Linux USB Debug Target".
The field length can be from 1 to 126 characters.
String is terminated at null or newline, driver does not support empty
string.
[ mn: Improve commit message and sysfs entry documentation ]
Signed-off-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260120181148.128712-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add dbc_serial sysfs attribute to allow changing the serial number
string descriptor presented by the debug device when a host requests a
string descriptor with iSerialNumber index.
Value can only be changed while debug capability (DbC) is in disabled
state to prevent USB device descriptor change while connected to a USB
host.
The default value is "0001".
The field length can be from 1 to 126 characters.
String is terminated at null or newline, driver does not support empty
string.
[ mn: Improve commit message and sysfs entry documentation ]
Signed-off-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260120181148.128712-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Reorganize the code to prepare ground for setting serial number,
product and manufacturer names through sysfs. This commit:
1. Introduces new buffers for storing serial number, product and
manufacturer name in utf8. The buffers will be used by sysfs
*_show and *_store functions.
2. Increases USB string descriptor data maximum length to the
value from USB specification (126 bytes of data).
3. Adds new helper functions get_str_desc_len, prepare_len
and xhci_dbc_populate_str_desc.
Signed-off-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260120181148.128712-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For systems where the ID pin isn't available as gpio use the ATTACHED_STATE
register instead to control vbus.
>From the datasheet:
"This is an additional method to communicate attach other
than the ID pin. These bits can be read by the application to
determine what was attached."
Use this method if id-gpios property is not set, but the connector node
has vbus-supply defined.
Signed-off-by: Jan Remmet <j.remmet@phytec.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260115-wip-jremmet-hd3ss3220_vbus-v1-1-b7d9adfbe346@phytec.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The platform_get_irq_byname() function already prints an error message
internally upon failure using dev_err_probe(). Therefore, the explicit
dev_err() is redundant and results in duplicate error logs.
Remove the redundant dev_err() call to clean up the error path.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260115023800.4142416-1-nichen@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We found that calling irq_dispose_mapping() caused a kernel warning
when removing the driver. The IRQs are obtained using
platform_get_irq(), which returns a Linux virtual IRQ number directly
managed by the device core, not by the OF subsystem. Therefore, the
driver should not call irq_dispose_mapping() for these IRQs.
Fixes: 5df186e2ef11 ("usb: xhci: tegra: Support USB wakeup function for Tegra234")
Cc: stable@vger.kernel.org
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Wei-Cheng Chen <weichengc@nvidia.com>
Link: https://patch.msgid.link/20260115103621.587366-1-weichengc@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next
Xu writes:
FPGA Manager changes for 6.20-rc1
- Mukesh fixes a typo in comments.
- Thadeu adds support for built-in dfl driver.
- Michal changes his email.
- Romain corrects the error handling when an fpga bridge is missing.
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-v6.20-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: dfl: fix typo in header file
fpga: dfl: use subsys_initcall to allow built-in drivers to be added
fpga: xilinx: Switch Michal Simek's email to new one
fpga: of-fpga-region: Fail if any bridge is missing
|
