| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add NULL pointer checks in ice_vsi_set_napi_queues() to prevent crashes
during resume from suspend when rings[q_idx]->q_vector is NULL.
Tested adaptor:
60:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Controller E810-XXV for SFP [8086:159b] (rev 02)
Subsystem: Intel Corporation Ethernet Network Adapter E810-XXV-2 [8086:4003]
SR-IOV state: both disabled and enabled can reproduce this issue.
kernel version: v6.18
Reproduce steps:
Boot up and execute suspend like systemctl suspend or rtcwake.
Log:
<1>[ 231.443607] BUG: kernel NULL pointer dereference, address: 0000000000000040
<1>[ 231.444052] #PF: supervisor read access in kernel mode
<1>[ 231.444484] #PF: error_code(0x0000) - not-present page
<6>[ 231.444913] PGD 0 P4D 0
<4>[ 231.445342] Oops: Oops: 0000 [#1] SMP NOPTI
<4>[ 231.446635] RIP: 0010:netif_queue_set_napi+0xa/0x170
<4>[ 231.447067] Code: 31 f6 31 ff c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 85 c9 74 0b <48> 83 79 30 00 0f 84 39 01 00 00 55 41 89 d1 49 89 f8 89 f2 48 89
<4>[ 231.447513] RSP: 0018:ffffcc780fc078c0 EFLAGS: 00010202
<4>[ 231.447961] RAX: ffff8b848ca30400 RBX: ffff8b848caf2028 RCX: 0000000000000010
<4>[ 231.448443] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8b848dbd4000
<4>[ 231.448896] RBP: ffffcc780fc078e8 R08: 0000000000000000 R09: 0000000000000000
<4>[ 231.449345] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001
<4>[ 231.449817] R13: ffff8b848dbd4000 R14: ffff8b84833390c8 R15: 0000000000000000
<4>[ 231.450265] FS: 00007c7b29e9d740(0000) GS:ffff8b8c068e2000(0000) knlGS:0000000000000000
<4>[ 231.450715] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[ 231.451179] CR2: 0000000000000040 CR3: 000000030626f004 CR4: 0000000000f72ef0
<4>[ 231.451629] PKRU: 55555554
<4>[ 231.452076] Call Trace:
<4>[ 231.452549] <TASK>
<4>[ 231.452996] ? ice_vsi_set_napi_queues+0x4d/0x110 [ice]
<4>[ 231.453482] ice_resume+0xfd/0x220 [ice]
<4>[ 231.453977] ? __pfx_pci_pm_resume+0x10/0x10
<4>[ 231.454425] pci_pm_resume+0x8c/0x140
<4>[ 231.454872] ? __pfx_pci_pm_resume+0x10/0x10
<4>[ 231.455347] dpm_run_callback+0x5f/0x160
<4>[ 231.455796] ? dpm_wait_for_superior+0x107/0x170
<4>[ 231.456244] device_resume+0x177/0x270
<4>[ 231.456708] dpm_resume+0x209/0x2f0
<4>[ 231.457151] dpm_resume_end+0x15/0x30
<4>[ 231.457596] suspend_devices_and_enter+0x1da/0x2b0
<4>[ 231.458054] enter_state+0x10e/0x570
Add defensive checks for both the ring pointer and its q_vector
before dereferencing, allowing the system to resume successfully even when
q_vectors are unmapped.
Fixes: 2a5dc090b92cf ("ice: move netif_queue_set_napi to rtnl-protected sections")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
hw->aci.lock is already initialized in ixgbe_sw_init(), so
ixgbe_recovery_probe() doesn't need to initialize the lock. This
function is also not responsible for destroying the lock on failures.
Additionally, change the name of label in accordance with this change.
Fixes: 29cb3b8d95c7 ("ixgbe: add E610 implementation of FW recovery mode")
Reported-by: Simon Horman <horms@kernel.org>
Closes: https://lore.kernel.org/intel-wired-lan/aTcFhoH-z2btEKT-@horms.kernel.org/
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When ixgbe_recovery_probe() is invoked and this function fails,
allocated resources in advance are not completely freed, because
ixgbe_probe() returns ixgbe_recovery_probe() directly and
ixgbe_recovery_probe() only frees partial resources, resulting in memory
leaks including:
- adapter->io_addr
- adapter->jump_tables[0]
- adapter->mac_table
- adapter->rss_key
- adapter->af_xdp_zc_qps
The leaked MMIO region can be observed in /proc/vmallocinfo, and the
remaining leaks are reported by kmemleak.
Don't return ixgbe_recovery_probe() directly, and instead let
ixgbe_probe() to clean up resources on failures.
Fixes: 29cb3b8d95c7 ("ixgbe: add E610 implementation of FW recovery mode")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Replace all sprintf() calls with sysfs_emit() in sysfs show functions.
sysfs_emit() is preferred to sprintf() for formatting sysfs output
as it provides better bounds checking and prevents potential buffer
overflows.
Signed-off-by: Sumeet Pawnikar <sumeet4linux@gmail.com>
[ rjw: Subject and changelog edits ]
Link: https://patch.msgid.link/20260126093949.8910-1-sumeet4linux@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Update EPP (Energy Performance Preference) constants for more clarity:
- Add CPPC_EPP_PERFORMANCE_PREF (0x00) for performance preference.
- Rename CPPC_ENERGY_PERF_MAX to CPPC_EPP_ENERGY_EFFICIENCY_PREF (0xFF)
for energy efficiency.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
[ rjw: Changelog edits ]
Link: https://patch.msgid.link/20260120145623.2959636-4-sumitg@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In the existing implementation irq_shutdown does not mask the interrupts
in hardware. This can cause spurious interrupts from the IO expander.
Add masking to irq_shutdown to prevent spurious interrupts.
Cc: stable@vger.kernel.org
Signed-off-by: Martin Larsson <martin.larsson@actia.se>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://lore.kernel.org/r/20260121125631.2758346-1-martin.larsson@actia.se
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
The gpio-virtuser configfs release path uses guard(mutex) to protect
the device structure. However, the device is freed before the guard
cleanup runs, causing mutex_unlock() to operate on freed memory.
Specifically, gpio_virtuser_device_config_group_release() destroys
the mutex and frees the device while still inside the guard(mutex)
scope. When the function returns, the guard cleanup invokes
mutex_unlock(&dev->lock), resulting in a slab use-after-free.
Limit the mutex lifetime by using a scoped_guard() only around the
activation check, so that the lock is released before mutex_destroy()
and kfree() are called.
Fixes: 91581c4b3f29 ("gpio: virtuser: new virtual testing driver for the GPIO API")
Signed-off-by: Yuhao Huang <nekowong743@gmail.com>
Link: https://lore.kernel.org/r/20260126040348.11167-1-yuhaohuang@YuhaodeMacBook-Pro.local
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
The BIT() macro uses unsigned long, which is 32 bits on 32-bit
architectures. When iterating over GPIO pins with index >= 32,
the expression (*value & BIT(i)) causes undefined behavior due
to shifting by a value >= type width.
Since 'value' is a pointer to u64, use BIT_ULL() to ensure correct
64-bit mask on all architectures.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Fixes: 2c4d00cb8fc5 ("gpiolib: acpi: Use BIT() macro to increase readability")
Signed-off-by: Denis Sergeev <denserg.edu@gmail.com>
Reviewed-by: Mika Westerberg <westeri@kernel.org>
Link: https://lore.kernel.org/r/20260126035914.16586-1-denserg.edu@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
There was a lockdep warning in sprd_gpio:
[ 6.258269][T329@C6] [ BUG: Invalid wait context ]
[ 6.258270][T329@C6] 6.18.0-android17-0-g30527ad7aaae-ab00009-4k #1 Tainted: G W OE
[ 6.258272][T329@C6] -----------------------------
[ 6.258273][T329@C6] modprobe/329 is trying to lock:
[ 6.258275][T329@C6] ffffff8081c91690 (&sprd_gpio->lock){....}-{3:3}, at: sprd_gpio_irq_unmask+0x4c/0xa4 [gpio_sprd]
[ 6.258282][T329@C6] other info that might help us debug this:
[ 6.258283][T329@C6] context-{5:5}
[ 6.258285][T329@C6] 3 locks held by modprobe/329:
[ 6.258286][T329@C6] #0: ffffff808baca108 (&dev->mutex){....}-{4:4}, at: __driver_attach+0xc4/0x204
[ 6.258295][T329@C6] #1: ffffff80965e7240 (request_class#4){+.+.}-{4:4}, at: __setup_irq+0x1cc/0x82c
[ 6.258304][T329@C6] #2: ffffff80965e70c8 (lock_class#4){....}-{2:2}, at: __setup_irq+0x21c/0x82c
[ 6.258313][T329@C6] stack backtrace:
[ 6.258314][T329@C6] CPU: 6 UID: 0 PID: 329 Comm: modprobe Tainted: G W OE 6.18.0-android17-0-g30527ad7aaae-ab00009-4k #1 PREEMPT 3ad5b0f45741a16e5838da790706e16ceb6717df
[ 6.258316][T329@C6] Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
[ 6.258317][T329@C6] Hardware name: Unisoc UMS9632-base Board (DT)
[ 6.258318][T329@C6] Call trace:
[ 6.258318][T329@C6] show_stack+0x20/0x30 (C)
[ 6.258321][T329@C6] __dump_stack+0x28/0x3c
[ 6.258324][T329@C6] dump_stack_lvl+0xac/0xf0
[ 6.258326][T329@C6] dump_stack+0x18/0x3c
[ 6.258329][T329@C6] __lock_acquire+0x824/0x2c28
[ 6.258331][T329@C6] lock_acquire+0x148/0x2cc
[ 6.258333][T329@C6] _raw_spin_lock_irqsave+0x6c/0xb4
[ 6.258334][T329@C6] sprd_gpio_irq_unmask+0x4c/0xa4 [gpio_sprd 814535e93c6d8e0853c45c02eab0fa88a9da6487]
[ 6.258337][T329@C6] irq_startup+0x238/0x350
[ 6.258340][T329@C6] __setup_irq+0x504/0x82c
[ 6.258342][T329@C6] request_threaded_irq+0x118/0x184
[ 6.258344][T329@C6] devm_request_threaded_irq+0x94/0x120
[ 6.258347][T329@C6] sc8546_init_irq+0x114/0x170 [sc8546_charger 223586ccafc27439f7db4f95b0c8e6e882349a99]
[ 6.258352][T329@C6] sc8546_charger_probe+0x53c/0x5a0 [sc8546_charger 223586ccafc27439f7db4f95b0c8e6e882349a99]
[ 6.258358][T329@C6] i2c_device_probe+0x2c8/0x350
[ 6.258361][T329@C6] really_probe+0x1a8/0x46c
[ 6.258363][T329@C6] __driver_probe_device+0xa4/0x10c
[ 6.258366][T329@C6] driver_probe_device+0x44/0x1b4
[ 6.258369][T329@C6] __driver_attach+0xd0/0x204
[ 6.258371][T329@C6] bus_for_each_dev+0x10c/0x168
[ 6.258373][T329@C6] driver_attach+0x2c/0x3c
[ 6.258376][T329@C6] bus_add_driver+0x154/0x29c
[ 6.258378][T329@C6] driver_register+0x70/0x10c
[ 6.258381][T329@C6] i2c_register_driver+0x48/0xc8
[ 6.258384][T329@C6] init_module+0x28/0xfd8 [sc8546_charger 223586ccafc27439f7db4f95b0c8e6e882349a99]
[ 6.258389][T329@C6] do_one_initcall+0x128/0x42c
[ 6.258392][T329@C6] do_init_module+0x60/0x254
[ 6.258395][T329@C6] load_module+0x1054/0x1220
[ 6.258397][T329@C6] __arm64_sys_finit_module+0x240/0x35c
[ 6.258400][T329@C6] invoke_syscall+0x60/0xec
[ 6.258402][T329@C6] el0_svc_common+0xb0/0xe4
[ 6.258405][T329@C6] do_el0_svc+0x24/0x30
[ 6.258407][T329@C6] el0_svc+0x54/0x1c4
[ 6.258409][T329@C6] el0t_64_sync_handler+0x68/0xdc
[ 6.258411][T329@C6] el0t_64_sync+0x1c4/0x1c8
This is because the spin_lock would change to rt_mutex in PREEMPT_RT,
however the sprd_gpio->lock would use in hard-irq, this is unsafe.
So change the spin_lock_t to raw_spin_lock_t to use the spinlock
in hard-irq.
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20260126094209.9855-1-xuewen.yan@unisoc.com
[Bartosz: tweaked the commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Group the MACPHY register offsets and associated bitfields together
to become self-documenting which definitions are associated with
which register.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vkL1y-00000005usW-1TKX@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rk3328 contains two GMAC instances - gmac2io and gmac2phy. While the
gmac2io instance may be connected to an external PHY, the gmac2phy
instance is permanently connected via RMII to an on-SoC integrated PHY.
The driver currently tests for the gmac2phy instance by checking
bsp_priv->integrated_phy (determined from the PHY's phy-is-integrated
property) and sometimes that the interface mode is RMII. This works
because the rk3328.dtsi has:
gmac2phy: ethernet@ff550000 {
compatible = "rockchip,rk3328-gmac";
phy-mode = "rmii";
phy-handle = <&phy>;
mdio {
phy: ethernet-phy@0 {
phy-is-integrated;
};
};
};
The driver contains a mechanism to look up the MMIO address in a table
to determine bsp_priv->id, which is used for every other Rockchip
device. Switch rk3328 to use this mechanism to determine bsp_priv->id
and use that to select which GRF register is used for configuration,
similarly to how the other Rockchip SoCs handle such differences.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vkL1t-00000005usQ-0vjt@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It is not worth having a common rk_phy_power_ctl() when the only
difference is which regulator function is called. Also, passing
true/false is non-descriptive. Split this function, moving the code
appropriately into rk_phy_powerup() and rk_phy_powerdown().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vkL1o-00000005usJ-08hy@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In https://lore.kernel.org/netdev/aDne1Ybuvbk0AwG0@shell.armlinux.org.uk/
I requested that a follow-up patch to change the name of dwmac-rk's
phy_power_on() function, which clashes with the drivers/phy function
of the same name. This can cause confusion when grepping for this
function name, or when reviewing code. Thankfully, stmmac doesn't make
use of drivers/phy which saves this from compile errors.
However, as is the usual case when a request is made as part of a
review, if the review leads to successful application of the patch the
author doesn't bother following up with any such requests, and so the
problem falls back onto the reviewer to address... so here is the
solution.
Rename dwmac-rk's function to rk_phy_power_ctl(), as the function both
powers up and down.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vkL1i-00000005usD-3lhz@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull VFIO fix from Alex Williamson:
- Fix a gap in the initial VFIO DMABUF implementation where it's
required to explicitly implement a failing pin callback to prevent
pinned importers that cannot properly support move_notify.
(Leon Romanovsky)
* tag 'vfio-v6.19-rc8' of https://github.com/awilliam/linux-vfio:
vfio: Prevent from pinned DMABUF importers to attach to VFIO DMABUF
|
|
These imports are already in scope by importing `kernel::prelude::*` and
does not need to be imported separately.
Signed-off-by: Gary Guo <gary@garyguo.net>
Acked-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Call drm_dev_unregister() when xe_device_probe() fails after successful
drm_dev_register(). This ensures the DRM device is promptly unregistered
before returning an error, avoiding leaving it registered on the failure
path.
Otherwise, there is warn message if xe_device_probe() is called again:
"
[ 207.322365] [drm:drm_minor_register]
[ 207.322381] debugfs: '128' already exists in 'dri'
[ 207.322432] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:01.0/0000:03:00.0/drm/renderD128'
[ 207.322435] CPU: 5 UID: 0 PID: 10261 Comm: modprobe Tainted: G B W 6.19.0-rc2-lgci-xe-kernel+ #223 PREEMPT(voluntary)
[ 207.322439] Tainted: [B]=BAD_PAGE, [W]=WARN
[ 207.322440] Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 0812 02/24/2023
[ 207.322441] Call Trace:
[ 207.322442] <TASK>
[ 207.322443] dump_stack_lvl+0xa0/0xc0
[ 207.322446] dump_stack+0x10/0x20
[ 207.322448] sysfs_warn_dup+0xd5/0x110
[ 207.322451] sysfs_create_dir_ns+0x1f6/0x280
[ 207.322453] ? __pfx_sysfs_create_dir_ns+0x10/0x10
[ 207.322455] ? lock_acquire+0x1a4/0x2e0
[ 207.322458] ? __kasan_check_read+0x11/0x20
[ 207.322461] kobject_add_internal+0x28d/0x8e0
[ 207.322464] kobject_add+0x11f/0x1f0
[ 207.322465] ? lock_acquire+0x1a4/0x2e0
[ 207.322467] ? __pfx_kobject_add+0x10/0x10
[ 207.322469] ? __kasan_check_write+0x14/0x20
[ 207.322471] ? kobject_put+0x62/0x4a0
[ 207.322473] ? get_device_parent.isra.0+0x1bb/0x4c0
[ 207.322475] ? kobject_put+0x62/0x4a0
[ 207.322477] device_add+0x2d7/0x1500
[ 207.322479] ? __pfx_device_add+0x10/0x10
[ 207.322481] ? drm_debugfs_add_file+0xfa/0x170
[ 207.322483] ? drm_debugfs_add_files+0x82/0xd0
[ 207.322485] ? drm_debugfs_add_files+0x82/0xd0
[ 207.322487] drm_minor_register+0x10a/0x2d0
[ 207.322489] drm_dev_register+0x143/0x860
[ 207.322491] ? xe_configfs_get_psmi_enabled+0x12/0x90 [xe]
[ 207.322667] xe_device_probe+0x185b/0x2c40 [xe]
[ 207.322812] ? __pfx___drm_dev_dbg+0x10/0x10
[ 207.322815] ? add_dr+0x180/0x220
[ 207.322818] ? __pfx___drmm_mutex_release+0x10/0x10
[ 207.322821] ? __pfx_xe_device_probe+0x10/0x10 [xe]
[ 207.322966] ? xe_pm_init_early+0x33a/0x410 [xe]
[ 207.323136] xe_pci_probe+0x936/0x1250 [xe]
[ 207.323298] ? lock_acquire+0x1a4/0x2e0
[ 207.323302] ? __pfx_xe_pci_probe+0x10/0x10 [xe]
[ 207.323464] local_pci_probe+0xe6/0x1a0
[ 207.323468] pci_device_probe+0x523/0x840
[ 207.323470] ? __pfx_pci_device_probe+0x10/0x10
[ 207.323473] ? sysfs_do_create_link_sd.isra.0+0x8c/0x110
[ 207.323476] ? sysfs_create_link+0x48/0xc0
[ 207.323479] really_probe+0x1fd/0x8a0
...
"
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patch.msgid.link/20260109211041.2446012-2-shuicheng.lin@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 60bfb8baf8f0d5b0d521744dfd01c880ce1a23f3)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Make several header functions static. Also remove
vdo_is_upgradable_version, which is unused.
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
The fsi bus got a dedicated probe function. Make use of that. This fixes
a runtime warning about the driver needing to be converted to the bus
probe method.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Eddie James <eajames@linux.ibm.com>
Link: https://patch.msgid.link/fc2a758ef00844dd5bd614a25b36a4a38355d12d.1765279318.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The fsi bus got a dedicated probe function. Make use of that. This fixes
a runtime warning about the driver needing to be converted to the bus
probe method.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Eddie James <eajames@linux.ibm.com>
Link: https://patch.msgid.link/d8c27aed45bf3119c08c9772768d675ae2ccc0c3.1765279318.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The fsi bus got a dedicated probe function. Make use of that. This fixes
a runtime warning about the driver needing to be converted to the bus
probe method.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Eddie James <eajames@linux.ibm.com>
Link: https://patch.msgid.link/d02a22f2f5442dc03d1d803d1b8190bc89bc71d4.1765279318.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The fsi bus got a dedicated probe function. Make use of that. This fixes
a runtime warning about the driver needing to be converted to the bus
probe method.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Eddie James <eajames@linux.ibm.com>
Link: https://patch.msgid.link/79dd5a9459f0719b7602165c89eb6fc24815f3b5.1765279318.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The fsi bus got a dedicated probe function. Make use of that. This fixes
a runtime warning about the driver needing to be converted to the bus
probe method.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Eddie James <eajames@linux.ibm.com>
Link: https://patch.msgid.link/17686d71b4ad3f7ebb63e92453273095a5dd09ea.1765279318.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The fsi bus got a dedicated probe and remove callback. Make use of them.
This fixes a runtime warning about the driver needing to be converted to
the bus methods.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Eddie James <eajames@linux.ibm.com>
Link: https://patch.msgid.link/694a7d077316c3e2883a8410eade67cd578ee556.1765279318.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Introduce a bus specific probe and remove function. For now this only
allows to get rid of a cast of the generic device to an fsi device in
the drivers and changes the remove prototype to return void---a non-zero
return value is ignored anyhow.
The objective is to get rid of users of struct device callbacks
.probe(), .remove() and .shutdown() to eventually remove these.
Until all fsi drivers are converted this results in a runtime warning
about the drivers needing an update because there is a bus probe
function and a driver probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Eddie James <eajames@linux.ibm.com>
Link: https://patch.msgid.link/3b53adb75a5ae7894736d46cb6eb85f5ef36520e.1765279318.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are no users of fsi_bus_type outside of fsi-core.c, so make that
variable static, don't export it and drop the declaration from the
public header file.
As there is a usage of fsi_bus_type in fsi_create_device() the
definition of that variable must happen further up in the file to not
have to add a local declaration.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Eddie James <eajames@linux.ibm.com>
Link: https://patch.msgid.link/bfd83034dec04d5a6b01a234988377fc6224614d.1765279318.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit FIXME ("fsi: Assign driver's bus in fsi_driver_register()")
module_fsi_driver() cares about assigning the driver's bus member. Drop
the explicit driver specific assignment.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Eddie James <eajames@linux.ibm.com>
Link: https://patch.msgid.link/279e26a6740f10d119be7ea01d4af596309b3bb4.1765279318.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit FIXME ("fsi: Assign driver's bus in fsi_driver_register()")
module_fsi_driver() cares about assigning the driver's bus member. Drop
the explicit driver specific assignment.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Eddie James <eajames@linux.ibm.com>
Link: https://patch.msgid.link/8a36a0dba809d3bfe225627fd178daece10ff6a5.1765279318.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Instead of letting each driver assign the bus, do it once in the fsi
driver register function.
Simplify the fsi drivers that are living in drivers/fsi accordingly.
Once all fsi drivers dropped assigning the bus, fsi_bus_type can be made
a static variable.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Eddie James <eajames@linux.ibm.com>
Link: https://patch.msgid.link/54804c2cd4d84a6b5fb679831122b6acdd36b168.1765279318.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
All other fsi drivers already use this helper to reduce boilerplate.
Catch up for the last two remaining ones.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Eddie James <eajames@linux.ibm.com>
Link: https://patch.msgid.link/602437dc213cbe35ee75d0d0a4b4a2c28859e3f9.1765279318.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move the acpi_processor_ffh_lpi_probe() call from
acpi_processor_setup_cpuidle_dev(), where its return value is
ignored, to acpi_processor_get_power_info(), which can take the
return value of that function into account in a meaningful way
and generally is a more suitable place for calling it.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
[ rjw: Message adjustment, subject and changelog edits ]
Link: https://patch.msgid.link/20260120112258.1595164-4-lihuisong@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The callers of acpi_processor_setup_cpuidle_dev() ignore its return
value, so convert it to a void function.
No intentional functional impact.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
[ rjw: Subject and changelog edits ]
Link: https://patch.msgid.link/20260120112258.1595164-3-lihuisong@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Since all callers of acpi_processor_setup_cpuidle_states() ignore its
return value and it simply passes the acpi_processor_setup_lpi_states()
return value to its callers, convert both of these functions to void.
No intentional functional impact.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
[ rjw: Subject and changelog edits ]
Link: https://patch.msgid.link/20260120112258.1595164-2-lihuisong@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Make the simple-pm-bus driver probe the Layerscape SCFG dt nodes and
populate platform_device structures from its child dt nodes.
This is now needed because its child interrupt-controller - ls-extirq -
is being handled as a platform_device instead of being initialized
through the IRQCHIP_DECLARE infrastructure which impeded its parent IRQ
retrieval through the blamed commit.
Note that this does not set ONLY_BUS because that enables the
of_platform_populate() call. The extra power management operations which
are enabled by that are not required but harmless.
Fixes: 1b1f04d8271e ("of/irq: Ignore interrupt parent for nodes without interrupts")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260122134034.3274053-3-ioana.ciornei@nxp.com
|
|
Starting with the blamed commit, the ls-extirq driver stopped working. This
is because ls-extirq, being one of the interrupt-map property abusers, does
not pass the DT checks added by the referenced commit, making it unable to
determine its interrupt parent:
irq-ls-extirq: Cannot find parent domain
OF: of_irq_init: Failed to init /soc/syscon@1f70000/interrupt-controller@14
((____ptrval____)), parent 0000000000000000
Instead of reverting the referenced commit, convert the ls-extirq to a
platform driver to avoid the irqchip_init() -> of_irq_init() code path
completely.
As part of the conversion, use the managed resources APIs and
dev_err_probe() so that there is no need for a .remove() callback or for
complicated error handling.
Fixes: 1b1f04d8271e ("of/irq: Ignore interrupt parent for nodes without interrupts")
Co-developed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260122134034.3274053-2-ioana.ciornei@nxp.com
|
|
Add the following compositions:
0x10a1: RNDIS + tty (AT/NMEA) + tty (AT) + tty (diag)
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10a1 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN920
S: SerialNumber=d128dba9
C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10a6: RNDIS + tty (AT/NMEA) + tty (AT) + tty (diag)
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10a6 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN920
S: SerialNumber=d128dba9
C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10ab: RNDIS + tty (AT) + tty (diag) + DPL (Data Packet Logging) + adb
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10ab Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN920
S: SerialNumber=d128dba9
C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Cc: stable@vger.kernel.org
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Use the return value of tnt4882_allocate_private in calling code as
early return value in case of error.
Signed-off-by: Dominik Karol Piątkowski <dominik.karol.piatkowski@protonmail.com>
Link: https://patch.msgid.link/20260116174647.317256-28-dominik.karol.piatkowski@protonmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Return -ENOMEM instead of -1 in tnt4882_allocate_private in case of
memory allocation failure.
Signed-off-by: Dominik Karol Piątkowski <dominik.karol.piatkowski@protonmail.com>
Link: https://patch.msgid.link/20260116174647.317256-27-dominik.karol.piatkowski@protonmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace kmalloc/memset pair to kzalloc in tnt4882_allocate_private.
Signed-off-by: Dominik Karol Piątkowski <dominik.karol.piatkowski@protonmail.com>
Link: https://patch.msgid.link/20260116174647.317256-26-dominik.karol.piatkowski@protonmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use the return value of allocate_private in calling code as early return
value in case of error.
Signed-off-by: Dominik Karol Piątkowski <dominik.karol.piatkowski@protonmail.com>
Link: https://patch.msgid.link/20260116174647.317256-25-dominik.karol.piatkowski@protonmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Return -ENOMEM instead of -1 in allocate_private in case of memory
allocation failure.
Signed-off-by: Dominik Karol Piątkowski <dominik.karol.piatkowski@protonmail.com>
Link: https://patch.msgid.link/20260116174647.317256-24-dominik.karol.piatkowski@protonmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace kmalloc/memset pair to kzalloc in allocate_private.
Signed-off-by: Dominik Karol Piątkowski <dominik.karol.piatkowski@protonmail.com>
Link: https://patch.msgid.link/20260116174647.317256-23-dominik.karol.piatkowski@protonmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change
if (retval < 0)
return retval;
into
if (retval)
return retval;
as it is more fitting in this case.
Signed-off-by: Dominik Karol Piątkowski <dominik.karol.piatkowski@protonmail.com>
Link: https://patch.msgid.link/20260116174647.317256-22-dominik.karol.piatkowski@protonmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace kmalloc/memset pair to kzalloc in ni_usb_allocate_private.
Signed-off-by: Dominik Karol Piątkowski <dominik.karol.piatkowski@protonmail.com>
Link: https://patch.msgid.link/20260116174647.317256-21-dominik.karol.piatkowski@protonmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use the return value of ines_allocate_private in calling code as early
return value in case of error.
Signed-off-by: Dominik Karol Piątkowski <dominik.karol.piatkowski@protonmail.com>
Link: https://patch.msgid.link/20260116174647.317256-20-dominik.karol.piatkowski@protonmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Return -ENOMEM instead of -1 in ines_allocate_private in case of memory
allocation failure.
Signed-off-by: Dominik Karol Piątkowski <dominik.karol.piatkowski@protonmail.com>
Link: https://patch.msgid.link/20260116174647.317256-19-dominik.karol.piatkowski@protonmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace kmalloc/memset pair to kzalloc in ines_allocate_private.
Signed-off-by: Dominik Karol Piątkowski <dominik.karol.piatkowski@protonmail.com>
Link: https://patch.msgid.link/20260116174647.317256-18-dominik.karol.piatkowski@protonmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use the return value of hp_82341_allocate_private in calling code as
early return value in case of error.
Signed-off-by: Dominik Karol Piątkowski <dominik.karol.piatkowski@protonmail.com>
Link: https://patch.msgid.link/20260116174647.317256-17-dominik.karol.piatkowski@protonmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use the return value of hp82335_allocate_private in calling code as
early return value in case of error.
Signed-off-by: Dominik Karol Piątkowski <dominik.karol.piatkowski@protonmail.com>
Link: https://patch.msgid.link/20260116174647.317256-16-dominik.karol.piatkowski@protonmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Return -ENOMEM instead of -1 in hp82335_allocate_private in case of
memory allocation failure.
Signed-off-by: Dominik Karol Piątkowski <dominik.karol.piatkowski@protonmail.com>
Link: https://patch.msgid.link/20260116174647.317256-15-dominik.karol.piatkowski@protonmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use the return value of allocate_private in calling code as early return
value in case of error.
Signed-off-by: Dominik Karol Piątkowski <dominik.karol.piatkowski@protonmail.com>
Link: https://patch.msgid.link/20260116174647.317256-14-dominik.karol.piatkowski@protonmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
