aboutsummaryrefslogtreecommitdiff
path: root/drivers/pinctrl
AgeCommit message (Collapse)AuthorFilesLines
2025-05-15pinctrl: armada-37xx: propagate error from armada_37xx_gpio_direction_output()Gabor Juhos1-3/+1
The regmap_update_bits() function can fail, so propagate its error up to the stack instead of silently ignoring that. Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-3-07e9ac1ab737@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-15pinctrl: armada-37xx: set GPIO output value before setting directionGabor Juhos1-8/+7
Changing the direction before updating the output value in the OUTPUT_VAL register may result in a glitch on the output line if the previous value in the OUTPUT_VAL register is different from the one we want to set. In order to avoid that, update the output value before changing the direction. Cc: stable@vger.kernel.org Fixes: 6702abb3bf23 ("pinctrl: armada-37xx: Fix direction_output() callback behavior") Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-2-07e9ac1ab737@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-15pinctrl: armada-37xx: use correct OUTPUT_VAL register for GPIOs > 31Gabor Juhos1-0/+3
The controller has two consecutive OUTPUT_VAL registers and both holds output value for 32 GPIOs. Due to a missing adjustment, the current code always uses the first register while setting the output value whereas it should use the second one for GPIOs > 31. Add the missing armada_37xx_update_reg() call to adjust the register according to the 'offset' parameter of the function to fix the issue. Cc: stable@vger.kernel.org Fixes: 6702abb3bf23 ("pinctrl: armada-37xx: Fix direction_output() callback behavior") Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-1-07e9ac1ab737@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-14Merge tag 'samsung-pinctrl-6.16' of ↵Linus Walleij5-151/+252
https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel Samsung pinctrl drivers changes for v6.16 Refactor the driver suspend and resume to handle Google GS101 EINT GPIO pin banks and add the alive pin bank for that SoC. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-13pinctrl: meson: Drop unused aml_pctl_find_group_by_name()Krzysztof Kozlowski1-14/+0
aml_pctl_find_group_by_name() is not used anywhere, as reported by W=1 clang build: pinctrl-amlogic-a4.c:600:2: error: unused function 'aml_pctl_find_group_by_name' [-Werror,-Wunused-function] Fixes: 6e9be3abb78c ("pinctrl: Add driver support for Amlogic SoCs") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Xianwei Zhao <xianwei.zhao@amlogic.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/20250509150114.299962-2-krzysztof.kozlowski@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-13pinctrl: at91: Fix possible out-of-boundary accessAndy Shevchenko1-1/+5
at91_gpio_probe() doesn't check that given OF alias is not available or something went wrong when trying to get it. This might have consequences when accessing gpio_chips array with that value as an index. Note, that BUG() can be compiled out and hence won't actually perform the required checks. Fixes: 6732ae5cb47c ("ARM: at91: add pinctrl support") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Closes: https://lore.kernel.org/r/202505052343.UHF1Zo93-lkp@intel.com/ Link: https://lore.kernel.org/20250508200807.1384558-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-13pinctrl: add stubs for OF-specific pinconf functionsBartosz Golaszewski1-0/+17
Allow building drivers using these interfaces with COMPILE_TEST enabled and OF disabled by providing stub definitions. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202505072245.OgSXI1hh-lkp@intel.com/ Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250507143551.47056-1-brgl@bgdev.pl Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-13pinctrl: qcom: correct the ngpios entry for QCS8300Lijuan Gao1-1/+1
Correct the ngpios entry to account for the UFS_RESET pin, which is expected to be wired to the reset pin of the primary UFS memory and is exported as GPIOs in addition to the real GPIOs, allowing the UFS driver to toggle it. Fixes: 0c4cd2cc87c8 ("pinctrl: qcom: add the tlmm driver for QCS8300 platforms") Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com> Link: https://lore.kernel.org/20250506-correct_gpio_ranges-v3-4-49a7d292befa@quicinc.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-13pinctrl: qcom: correct the ngpios entry for QCS615Lijuan Gao1-1/+1
Correct the ngpios entry to account for the UFS_RESET pin being exported as a GPIO in addition to the real GPIOs, allowing the UFS driver to toggle it. Fixes: b698f36a9d40 ("pinctrl: qcom: add the tlmm driver for QCS615 platform") Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com> Link: https://lore.kernel.org/20250506-correct_gpio_ranges-v3-3-49a7d292befa@quicinc.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-13pinctrl: amd: Fix hibernation support with CONFIG_SUSPEND unsetRafael J. Wysocki1-27/+36
After recent changes, pinctrl-amd will not support hibernation when CONFIG_HIBERNATION is set and CONFIG_SUSPEND isn't because it will not register amd_gpio_pm_ops then. Address this by restoring dependencies on CONFIG_PM_SLEEP where necessary for hibernation support. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patch.msgid.link/5889368.DvuYhMxLoT@rjwysocki.net
2025-05-13Merge tag 'renesas-pinctrl-for-v6.16-tag1' of ↵Linus Walleij2-130/+170
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: renesas: Updates for v6.16 - Add support for the RZ/V2N (R9A09G056) Soc. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-09pinctrl: bcm2835: use new GPIO line value setter callbacksBartosz Golaszewski1-3/+6
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250425-gpiochip-set-rv-pinctrl-bcm-v1-3-6b8883d79b66@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-09pinctrl: bcm: iproc-gpio: use new GPIO line value setter callbacksBartosz Golaszewski1-2/+4
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250425-gpiochip-set-rv-pinctrl-bcm-v1-2-6b8883d79b66@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-09pinctrl: bcm: nsp-gpio: use new GPIO line value setter callbacksBartosz Golaszewski1-2/+4
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250425-gpiochip-set-rv-pinctrl-bcm-v1-1-6b8883d79b66@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-09pinctrl: mediatek: common: use new GPIO line value setter callbacksBartosz Golaszewski1-4/+9
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250425-gpiochip-set-rv-pinctrl-mediatek-v1-5-93e6a01855e7@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-09pinctrl: mediatek: moore: use new GPIO line value setter callbacksBartosz Golaszewski1-8/+10
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250425-gpiochip-set-rv-pinctrl-mediatek-v1-4-93e6a01855e7@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-09pinctrl: mediatek: paris: use new GPIO line value setter callbacksBartosz Golaszewski1-4/+8
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250425-gpiochip-set-rv-pinctrl-mediatek-v1-3-93e6a01855e7@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-09pinctrl: mediatek: paris: don't double-check the GPIO numberBartosz Golaszewski1-19/+0
GPIO core already makes sure we don't pass invalid GPIO numbers down to the driver callbacks. Remove needless checks from the driver. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250425-gpiochip-set-rv-pinctrl-mediatek-v1-2-93e6a01855e7@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-09pinctrl: mediatek: airoha: use new GPIO line value setter callbacksBartosz Golaszewski1-11/+8
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/20250425-gpiochip-set-rv-pinctrl-mediatek-v1-1-93e6a01855e7@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-08pinctrl: at91: drop unneeded dependency on OF_GPIOBartosz Golaszewski1-1/+0
This driver does not use any symbols from gpiolib-of.c. There's no reason for it to select OF_GPIO directly. This addresses a kismet issue reported by the build bot. Fixes: 8e86af65f39d ("pinctrl: at91: allow building the module with COMPILE_TEST=y") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202505010447.kUlI61vt-lkp@intel.com/ Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250502100841.113091-1-brgl@bgdev.pl Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-06pinctrl: amd: Fix use of undeclared identifier 'pinctrl_amd_s2idle_dev_ops'Mario Limonciello1-5/+9
`pinctrl_amd_s2idle_dev_ops` is hidden under both `CONFIG_ACPI` and `CONFIG_PM_SLEEP` so the functions that use it need the same scope. Adjust checks to look for both, and while updating make it CONFIG_SUSPEND instead as that's what the ACPI header uses. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202504100420.88UPkUTU-lkp@intel.com/ Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patch.msgid.link/20250414203551.779320-1-superm1@kernel.org [ rjw: Add missing #ifdef/#endif block ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-05-05pinctrl: renesas: rzg2l: Add support for RZ/V2N SoCLad Prabhakar2-130/+170
Add pinctrl support for the Renesas RZ/V2N SoC by reusing the existing RZ/V2H(P) pin configuration data. The PFC block is nearly identical, with the only difference being the absence of `PCIE1_RSTOUTB` on RZ/V2N. To handle this, the rzv2h_dedicated_pins array is refactored into a common and pcie1 subset. This enables reuse of the common portion across both SoCs, while excluding PCIE1_RSTOUTB for RZ/V2N. This change allows the pinctrl-rzg2l driver to support RZ/V2N without duplicating large parts of the RZ/V2H configuration. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250415130854.242227-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-29pinctrl: samsung: use new GPIO line value setter callbacksBartosz Golaszewski1-4/+9
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250424-gpiochip-set-rv-pinctrl-part2-v1-12-504f91120b99@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-29pinctrl: pistachio: use new GPIO line value setter callbacksBartosz Golaszewski1-3/+5
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250424-gpiochip-set-rv-pinctrl-part2-v1-11-504f91120b99@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-29pinctrl: armada-37xx: use new GPIO line value setter callbacksBartosz Golaszewski1-8/+5
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250424-gpiochip-set-rv-pinctrl-part2-v1-10-504f91120b99@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-29pinctrl: at91: use new GPIO line value setter callbacksBartosz Golaszewski1-6/+9
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250424-gpiochip-set-rv-pinctrl-part2-v1-9-504f91120b99@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-29pinctrl: at91: allow building the module with COMPILE_TEST=yBartosz Golaszewski1-2/+1
Extend the build coverage by allowing to build the module with COMPILE_TEST enabled. We can do this as the driver doesn't depend on any architecture-specific bits. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250424-gpiochip-set-rv-pinctrl-part2-v1-8-504f91120b99@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-29pinctrl: microchip-sgpio: use new GPIO line value setter callbacksBartosz Golaszewski1-4/+4
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250424-gpiochip-set-rv-pinctrl-part2-v1-7-504f91120b99@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-29pinctrl: ingenic: use new GPIO line value setter callbacksBartosz Golaszewski1-3/+5
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/20250424-gpiochip-set-rv-pinctrl-part2-v1-6-504f91120b99@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-29pinctrl: stm32: use new GPIO line value setter callbacksBartosz Golaszewski1-2/+5
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Antonio Borneo <antonio.borneo@foss.st.com> Link: https://lore.kernel.org/20250424-gpiochip-set-rv-pinctrl-part2-v1-5-504f91120b99@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-29pinctrl: owl: use new GPIO line value setter callbacksBartosz Golaszewski1-3/+5
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/20250424-gpiochip-set-rv-pinctrl-part2-v1-4-504f91120b99@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-29pinctrl: stmfx: use new GPIO line value setter callbacksBartosz Golaszewski1-5/+8
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/20250424-gpiochip-set-rv-pinctrl-part2-v1-3-504f91120b99@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-29pinctrl: axp209: use new GPIO line value setter callbacksBartosz Golaszewski1-20/+15
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/20250424-gpiochip-set-rv-pinctrl-part2-v1-2-504f91120b99@linaro.org [Drop unnecessary curly braces] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-29pinctrl: amd: use new GPIO line value setter callbacksBartosz Golaszewski1-2/+5
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250424-gpiochip-set-rv-pinctrl-part2-v1-1-504f91120b99@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-29pinctrl: qcom: Fix PINGROUP definition for sm8750Maulik Shah1-1/+3
On newer SoCs intr_target_bit position is at 8 instead of 5. Fix it. Also add missing intr_wakeup_present_bit and intr_wakeup_enable_bit which enables forwarding of GPIO interrupts to parent PDC interrupt controller. Fixes: afe9803e3b82 ("pinctrl: qcom: Add sm8750 pinctrl driver") Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Melody Olvera <melody.olvera@oss.qualcomm.com> Link: https://lore.kernel.org/20250429-pinctrl_sm8750-v2-1-87d45dd3bd82@oss.qualcomm.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-23pinctrl: mediatek: common-v1: Fix error checking in mtk_eint_init()Dan Carpenter1-3/+3
The devm_kzalloc() function doesn't return error pointers, it returns NULL on error. Then on the next line it checks the same pointer again by mistake, "->base" instead of "->base[0]". Fixes: fe412e3a6c97 ("pinctrl: mediatek: common-v1: Fix EINT breakage on older controllers") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/aAijc10fHka1WAMX@stanley.mountain Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-23pinctrl: mediatek: Fix new design debounce issueHao Chang1-1/+1
Calculate the true offset of eint according to index. Fixes: 3ef9f710efcb ("pinctrl: mediatek: Add EINT support for multiple addresses") Signed-off-by: Hao Chang <ot_chhao.chang@mediatek.com> Signed-off-by: Qingliang Li <qingliang.li@mediatek.com> Link: https://lore.kernel.org/20250422075216.14073-1-ot_chhao.chang@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-23pinctrl: mediatek: pinctrl: mediatek: add mt8196 eint pinHao Chang2-0/+297
Add eint pin support for MediaTek mt8196 SoC. Signed-off-by: Hao Chang <ot_chhao.chang@mediatek.com> Signed-off-by: Qingliang Li <qingliang.li@mediatek.com> Acked-by: Cathy Xu (许华婷) <ot_cathy.xu@mediatek.com> Link: https://lore.kernel.org/20250411084159.3307-1-ot_chhao.chang@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-23pinctrl: spacemit: add clock support for K1 SoCYixun Lan1-0/+10
For SpacemiT K1 SoC's pinctrl, explicitly acquiring clocks in the driver instead of relying on bootloader or default hardware settings to enable it. Signed-off-by: Yixun Lan <dlan@gentoo.org> Reviewed-by: Alex Elder <elder@riscstar.com> Link: https://lore.kernel.org/20250416-02-k1-pinctrl-clk-v2-2-2b5fcbd4183c@gentoo.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-17pinctrl: mediatek: common-v1: Fix EINT breakage on older controllersChen-Yu Tsai1-1/+7
When EINT support for multiple addresses was introduced, the driver library for the older generations (pinctrl-mtk-common) was not fixed together. This resulted in invalid pointer accesses. Fix up the filled in |struct mtk_eint| in pinctrl-mtk-common to match what is now expected by the mtk-eint library. Reported-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Tested-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Closes: https://lore.kernel.org/all/43nd5jxpk7b7fv46frqlfjnqfh5jlpqsemeoakqzd4wdi3df6y@w7ycd3k5ezvn/ Fixes: 3ef9f710efcb ("pinctrl: mediatek: Add EINT support for multiple addresses") Cc: Hao Chang <ot_chhao.chang@mediatek.com> Cc: Qingliang Li <qingliang.li@mediatek.com> Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/20250415112339.2385454-1-wenst@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-17pinctr: nomadik: abx500: Restrict compile testLinus Walleij1-1/+1
The ABX500 module depends hard on AB8500_CORE it cannot be compile-tested in isolation. Fixes: 720abc5c58d8 ("pinctrl: abx500: enable building modules with COMPILE_TEST=y") Reported-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/20250417-abx500-pinctrl-v1-1-0691ad29e2a6@linaro.org
2025-04-17pinctrl: mediatek: Add pinctrl driver on mt8196Guodong Liu4-0/+4661
Add pinctrl driver support for MediaTek Soc mt8196. Signed-off-by: Guodong Liu <guodong.liu@mediatek.com> Signed-off-by: Cathy Xu <ot_cathy.xu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/20250414090215.16091-4-ot_cathy.xu@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-17pinctrl: mediatek: Add pinctrl driver for MT6893 Dimensity 1200AngeloGioacchino Del Regno4-0/+3173
Add support for the MediaTek Dimensity 1200 (MT6893) SoC's GPIO/pinmux controller. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/20250410144044.476060-3-angelogioacchino.delregno@collabora.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-17pinctrl: qcom: ssbi-mpp: use new GPIO line value setter callbacksBartosz Golaszewski1-3/+4
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/20250410-gpiochip-set-rv-pinctrl-qcom-v1-6-6a6891338aae@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-17pinctrl: qcom: ssbi-gpio: use new GPIO line value setter callbacksBartosz Golaszewski1-3/+4
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/20250410-gpiochip-set-rv-pinctrl-qcom-v1-5-6a6891338aae@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-17pinctrl: qcom: spmi-mpp: use new GPIO line value setter callbacksBartosz Golaszewski1-3/+3
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/20250410-gpiochip-set-rv-pinctrl-qcom-v1-4-6a6891338aae@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-17pinctrl: qcom: spmi-gpio: use new GPIO line value setter callbacksBartosz Golaszewski1-3/+3
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/20250410-gpiochip-set-rv-pinctrl-qcom-v1-3-6a6891338aae@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-17pinctrl: qcom: msm: use new GPIO line value setter callbacksBartosz Golaszewski1-2/+4
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/20250410-gpiochip-set-rv-pinctrl-qcom-v1-2-6a6891338aae@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-17pinctrl: qcom: lpass-lpi: use new GPIO line value setter callbacksBartosz Golaszewski1-3/+3
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/20250410-gpiochip-set-rv-pinctrl-qcom-v1-1-6a6891338aae@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-17pinctrl: qcom: pinctrl-qcm2290: Add egpio supportWojciech Slenska1-29/+41
qcm2290 supports the egpio feature on GPIOs ranging from 98 to 126. This change is necessary to allow these GPIOs to be driven by TLMM. Signed-off-by: Wojciech Slenska <wojciech.slenska@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/20250409080030.62254-1-wojciech.slenska@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit