| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into fixes
Qualcomm pin control fixes for v7.2-rc6
- mark gpio and pci reset as a GPIO pin functions in pinctrl-ipq8064
- fix audio_sec_mclk_in1/out1 pin numbers in pinctrl-ipq9650
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
The qcom pinctrl core supports marking functions that represent GPIO mode
via PINCTRL_GPIO_PINFUNCTION(), so that strict pinmuxing does not reject
GPIO requests for pins that are muxed to the GPIO function.
Mark PCIe reset as GPIO pin function
This allows ipq806x to keep the PCIe-reset related configuration in DTS
without tripping over strict pinmux ownership checks.
Fixes: cc85cb96e2e4 ("pinctrl: qcom: make the pinmuxing strict")
Signed-off-by: Hans Ulli Kroll <linux@ulli-kroll.de>
Acked-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260719134548.8830-3-linux@ulli-kroll.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
The qcom pinctrl core supports marking functions that represent GPIO mode
via PINCTRL_GPIO_PINFUNCTION(), so that strict pinmuxing does not reject
GPIO requests for pins that are muxed to the GPIO function.
Add a IPQ_GPIO_PIN_FUNCTION() helper and use it for the ipq806x gpio
function, matching how the msm-based qcom drivers handle this.
This allows ipq806x to keep the GPIO-related configuration in DTS
without tripping over strict pinmux ownership
checks.
Fixes: cc85cb96e2e4 ("pinctrl: qcom: make the pinmuxing strict")
Signed-off-by: Hans Ulli Kroll <linux@ulli-kroll.de>
Acked-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260719134548.8830-2-linux@ulli-kroll.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"The most interesting commit is the S4 fix for AMD, which probably is
helpful to a whole bunch of important machines.
- Wakeup nits on the Qualcomm SC8280XP
- Double-free issues on the device tree parsing error path
- Fixup of the S4 sleep state handling on AMD pin control
- Missing Kconfig select REGMAP_MMIO for the Microchip driver leading
to compile stalls
- Missing Kconfig select GENERIC_PINCONF for the Bitmain BM1880
leading to compile stalls"
* tag 'pinctrl-v7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: bm1880: add missing select GENERIC_PINCONF
pinctrl-amd: Don't clear S4 wake bits at probe
pinctrl: microchip-sgpio: add missing select REGMAP_MMIO
pinctrl: devicetree: don't free uninitialized dev_name on error path
pinctrl: qcom: sc8280xp: Add missing wakeup entries for GPIO143/151
pinctrl: qcom: Unconditionally mark gpio as wakeup enable
|
|
The audio_sec_mclk_in1 and audio_sec_mclk_out1 groups both list
"gpio37", but in the pingroup table those functions are muxed on
gpio39, while gpio37 provides the audio_sec_mclk_in0/out0 variants.
This makes both functions unusable: selecting them on gpio39 is
rejected by the pinmux core because the group is not listed for the
function, and selecting them on gpio37 trips the WARN_ON() in
msm_pinmux_set_mux() and fails with -EINVAL because that group
cannot mux them.
Point both groups at gpio39, matching the pingroup table. This also
mirrors the primary audio MCLK pair, where the mclk0 and mclk1
variants live on separate pins (gpio53 and gpio51 respectively).
Fixes: 3c8e7ba0e399 ("pinctrl: qcom: Introduce IPQ9650 TLMM driver")
Assisted-by: Claude:claude-fable-5
Signed-off-by: Taceddin Sancak <ts.solidarity@gmail.com>
Acked-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260718002146.698973-1-ts.solidarity@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
drivers/pinctrl/pinctrl-bm1880.c initialises its pinconf_ops with
.is_generic = true, but that field is only present when
CONFIG_GENERIC_PINCONF is enabled (guarded by #ifdef in pinconf.h).
The Kconfig entry for PINCTRL_BM1880 never selects GENERIC_PINCONF,
so any config that enables CONFIG_PINCTRL_BM1880=y without
CONFIG_GENERIC_PINCONF=y fails to compile:
drivers/pinctrl/pinctrl-bm1880.c:1288:10: error: 'const struct pinconf_ops' has no member named 'is_generic'
Found by randconfig testing on arm64; tinyconfig reproducer below.
Add the missing select to fix the build.
Fixes: 49bd61ebce5f ("pinctrl: Add pinconf support for BM1880 SoC")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Boortz <bennib@mailbox.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
commit 6bc3462a0f5e ("pinctrl: amd: Mask wake bits on probe again")
introduced a regression where Wake-on-LAN no longer works after suspend
or shutdown on some AMD platforms.
Firmware-programmed S4 wake bits for devices like PCIe NICs using PCI
PME are cleared at probe, but nothing restores them. Unlike S0i3/S3 wake
sources that use enable_irq_wake() -> amd_gpio_irq_set_wake(), PCIe PME
does not use GPIO IRQ infrastructure and relies on firmware configuration.
The original intent of commit 6bc3462a0f5e ("pinctrl: amd: Mask wake
bits on probe again") was to clear spurious wake bits left by firmware
to prevent unwanted wakeups. However, S4 wake bits are used for
hardware-level wake sources like WoL that bypass the kernel's IRQ wake
API.
Fix by preserving S4 wake bits at probe and only clearing S0i3/S3 bits:
- Firmware-configured S4 wake sources (WoL) continue working
- Kernel maintains control of S3/S0i3 wake policy via set_wake()
- S3-only wake sources work correctly per commit f31f33dbb3ba ("pinctrl:
amd: Take suspend type into consideration which pins are non-wake")
The trade-off is that firmware-programmed spurious S4 wake bits remain
set, but this is less problematic than breaking WoL.
Fixes: 6bc3462a0f5e ("pinctrl: amd: Mask wake bits on probe again")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
The driver calls ocelot_regmap_from_resource() via <linux/mfd/ocelot.h>,
which internally uses devm_regmap_init_mmio() and requires REGMAP_MMIO.
The Kconfig entry does not select REGMAP_MMIO, causing a build failure
when no other driver in the config happens to pull in REGMAP_MMIO:
include/linux/mfd/ocelot.h:34:24: error: implicit declaration of function 'devm_regmap_init_mmio'
Found by randconfig testing on arm64; tinyconfig reproducer below.
Fixes: 2afbbab45c26 ("pinctrl: microchip-sgpio: update to support regmap")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Boortz <bennib@mailbox.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
dt_remember_or_free_map() duplicates dev_name for each map entry. If
kstrdup_const() fails, dt_free_map() frees dev_name in all num_maps
entries, including entries that have not been initialized.
Some pinctrl drivers, including pinctrl-imx, allocate the map with
kmalloc() and leave dev_name for the core to initialize. The untouched
entries therefore contain uninitialized data which is passed to
kfree_const().
Reproduced on qemu's mcimx6ul-evk (pinctrl-imx) with failslab injection
while binding the pinctrl-consuming device, under KASAN:
BUG: KASAN: double-free in dt_free_map+0x34/0xa4
Free of addr c425a900 by task init/1
kfree from dt_free_map+0x34/0xa4
dt_free_map from dt_remember_or_free_map+0x184/0x198
dt_remember_or_free_map from pinctrl_dt_to_map+0x33c/0x4c8
pinctrl_dt_to_map from create_pinctrl+0x9c/0x5c0
Initialize all dev_name fields to NULL before duplicating the device
name, making the full-map cleanup safe after a partial failure.
Fixes: be4c60b563ed ("pinctrl: devicetree: Avoid taking direct reference to device name string")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-fable-5
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- check the return value of gpiochip_add_data() in gpio-mvebu and
gpio-htc-egpio
- avoid locking context issues with GPIO drivers using the shared GPIO
proxy by only allowing sleeping operations (atomic GPIO ops don't
really make sense in shared context anyway)
- with the above: restore non-sleeping GPIO access in pinctrl-meson
- fix return value on OOM in gpio-timberdale
- fix interrupt handling in gpio-mt7621
- support both A and B variants of NCT6126D in gpio-f7188x
* tag 'gpio-fixes-for-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
pinctrl: meson: restore non-sleeping GPIO access
gpio: timberdale: Return -ENOMEM on dynamic memory allocation in probe
gpio: mt7621: be sure IRQ domain is created before exposing GPIO chips
gpio: mt7621: more robust management of IRQ domain teardown
gpio: mt7621: avoid corruption of shared interrupt trigger state
gpio: shared-proxy: always serialize with a sleeping mutex
gpio-f7188x: Add support for NCT6126D version B
gpio: htc-egpio: use managed gpiochip registration
gpio: mvebu: fail probe if gpiochip registration fails
|
|
files)
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
|
|
Commit 28f240683871 ("pinctrl: meson: mark the GPIO controller as
sleeping") set gpio_chip.can_sleep = true to work around
gpio-shared-proxy holding a spinlock across a sleeping pinctrl config
path. That locking bug is now fixed in the shared-proxy itself ("gpio:
shared-proxy: always serialize with a sleeping mutex"), so the
controller-wide workaround is no longer needed; the meson GPIO
controller does not sleep.
meson_gpio_get/set/direction_* access MMIO through regmap. The
regmap_mmio bus uses fast I/O (spinlock) locking, so these value
callbacks do not contain sleeping operations. Since gpio_chip.can_sleep
describes the get/set value path, restore can_sleep = false.
Marking the controller sleeping also broke atomic value consumers such
as w1-gpio (1-Wire bitbang): w1_io.c runs its read time slot under
local_irq_save() and uses the non-cansleep gpiod_set_value() /
gpiod_get_value(), which with can_sleep=true trigger WARN_ON(can_sleep)
in gpiolib on every transferred bit (from w1_gpio_write_bit() /
w1_gpio_read_bit() via w1_reset_bus() and w1_search()). The printk and
stack dump inside the IRQs-off, microsecond-scale time slot destroy the
bit timing, so reset/presence detection and ROM search fail: the bus
master registers but w1_master_slave_count stays at 0 and no devices
are found. Verified on an Amlogic A113X board (DS18B20 on GPIOA_14):
with can_sleep restored to false the warnings are gone and the sensor
is detected and read again.
This must not be applied or backported without the shared-proxy locking
fix above; otherwise the original Khadas VIM3 splat returns on boards
that genuinely share a meson GPIO.
Fixes: 28f240683871 ("pinctrl: meson: mark the GPIO controller as sleeping")
Link: https://lore.kernel.org/all/20260105150509.56537-1-bartosz.golaszewski@oss.qualcomm.com/
Signed-off-by: Viacheslav Bocharov <v@baodeep.com>
Acked-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260625115718.1678991-3-v@baodeep.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Pins 143 and 151 were not included in the PDC wakeup map. They are
normally used for PCIe2A and PCIe3a PERST# respectively, so they're
unlikely to be excercised in practice, but still add them for the sake
of completeness.
Fixes: c0e4c71a9e7c ("pinctrl: qcom: Introduce sc8280xp TLMM driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260626-topic-8280_pinctrl_wakeup-v1-1-2ccb267148f5@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
GPIO interrupts that are wakeup capable need to be forwarded to wakeup
capable parent irqchip. This is done via writing to it's wakeup_enable bit.
Currently the bit is set only for PDC irqchip by checking skip_wake_irqs.
skip_wake_irqs is set to differentiate between parent irqchips MPM and
PDC. It is set when the parent irqchip is PDC to inform pinctrl about
skipping the IRQ setting up at TLMM.
However, the functionality to forward GPIO interrupts during SoC low
power mode is needed regardless of which parent irqchip it is.
Without the functionality it is impossible for MPM irqchip to detect the
GPIO interrupt during SoC low power mode since for MPM irqchip the
skip_wake_irqs is always false.
Remove skip_wake_irqs condition when setting wakeup enable bit to allow
forwarding GPIO interrupts for SoCs using MPM irqchip too.
Fixes: 76b446f5b86e ("pinctrl: qcom: handle intr_target_reg wakeup_present/enable bits")
Signed-off-by: Sneh Mankad <sneh.mankad@oss.qualcomm.com>
Reviewed-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260616-enable_wakeup_capable_gpios-v3-1-fb59647d89cb@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- Add new generic callbacks to populate per-pin pin controllers
creating groups and functions from the device tree building out
pinctrl_generic_to_map() and move the Spacemit driver over to use
this
- Generic board-level pin control driver using the mux framework
New pin controller drivers:
- Amlogic (meson) A9 SoC
- Aspeed AST2700 SoC0 and SoC1
- nVidia Tegra264 and Tegra238
- Qualcomm Nord TLMM, Shikra TLMM, SM6350 LPASS LPI, and IPQ9650 TLMM
- Renesas RZ/G3L SoC
- UltraRISC DP1000
Improvements:
- Handle pull up/pull down properly in the Renesas RZG2L driver
- Fix up nVidia Tegra 234 DT bindings
- Fix up pin definitions in the Qualcomm Eliza driver
- Qualcomm PM8010 GPIO support in the PM8010
- Qualcomm SM6115 EGPIO support in the SM6115
- Switch Qualcomm LPASS LPI drivers to use runtime PM for power
management
- Clean up the Qualcomm Kconfig business a bit to include the
necessary drivers for each subarch
- Fix output glitch in the Amlogic (meson) A4 pin controller
- Move the Airoha driver from the Mediatek directory to its own
directory. It is too different from other Mediatek hardware
- A slew of fixes to the Airoha AN7581 and AN7583 drivers"
* tag 'pinctrl-v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (151 commits)
pinctrl: Export pinctrl_get_group_selector()
pinctrl: Match DT helper types
pinctrl: qcom: Register functions before enabling pinctrl
pinctrl: meson: amlogic-a4: use nolock get range
pinctrl: ultrarisc: Add UltraRISC DP1000 pinctrl driver
dt-bindings: pinctrl: Add UltraRISC DP1000 pinctrl controller
pinctrl: qcom: Remove unused macro definitions
pinctrl: tegra: PINCTRL_TEGRA264 should depend on ARCH_TEGRA
pinctrl: tegra: PINCTRL_TEGRA238 should depend on ARCH_TEGRA
pinctrl: tegra238: add missing AON pin groups
dt-bindings: pinctrl: tegra238: add missing AON pin groups
pinctrl: airoha: an7583: remove undefined groups from pcm_spi pin function
pinctrl: airoha: an7583: fix phy1_led1 pin function
pinctrl: airoha: an7583: add missed gpio22 pin group
pinctrl: airoha: an7583: fix gpio21 pin group
pinctrl: airoha: fix pwm pin function for an7581 and an7583
pinctrl: airoha: an7583: fix incorrect led mapping in phy4_led1 pin function
pinctrl: airoha: an7581: fix incorrect led mapping in phy4_led1 pin function
pinctrl: airoha: an7583: fix misprint in gpio19 pinconf
pinctrl: airoha: an7581: fix misprint in gpio19 pinconf
...
|
|
The recently added UltraRISC DP1000 is using this symbol, and in
a reasonable way as well, so export it.
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: Link: https://lore.kernel.org/linux-gpio/20260613164847.GA3152104@ax162/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202606130210.ytVPxHlm-lkp@intel.com/
Fixes: cb7037924836 ("pinctrl: ultrarisc: Add UltraRISC DP1000 pinctrl driver")
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
The affected pinctrl drivers either check for the presence of a standard
property or read a property documented with an 8-bit cell encoding.
Using boolean or u32 helpers for those cases disagrees with the binding.
Use a presence helper for "gpio-ranges" and read
"microchip,spi-present-mask" with the u8 helper documented by the
binding.
Assisted-by: Codex:gpt-5-5
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
pinctrl consumers can request states while the pinctrl core enables the
controller. On Qualcomm pinctrl drivers this can happen before the SoC
function list has been registered, which leaves the function table
incomplete during state lookup.
On APQ8064 this can fail while claiming pinctrl hogs:
apq8064-pinctrl 800000.pinctrl: invalid function ps_hold in map table
apq8064-pinctrl 800000.pinctrl: error claiming hogs: -22
apq8064-pinctrl 800000.pinctrl: could not claim hogs: -22
Register Qualcomm pinctrl with devm_pinctrl_register_and_init(), add the
SoC pin functions, and only then enable the pinctrl device.
Signed-off-by: Alexandre MINETTE <contact@alex-min.fr>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Use pinctrl_find_gpio_range_from_pin_nolock() instead of
pinctrl_find_gpio_range_from_pin() when configuring a pin or
setting a GPIO value.
This avoids taking the lock and allows the code to be safely
called from interrupt context.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Add support for the pin controller on the UltraRISC DP1000 SoC.
The controller provides mux selection for pins in ports A, B, C, D, and
LPC. Ports A-D default to GPIO and support peripheral muxing. LPC pins
can be switched to eSPI, but are not available as GPIOs. Basic pin
configuration controls such as drive strength, pull-up, and pull-down
are also supported.
Signed-off-by: Jia Wang <wangjia@ultrarisc.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
The macros QUP_I3C and UFS_RESET are defined in some platforms
and yet not used. Remove these macros as they are unnecessary.
Signed-off-by: Navya Malempati <navya.malempati@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
The NVIDIA Tegra264 MAIN, AON, and UPHY pin controllers are only present
on NVIDIA Tegra264 SoCs. Hence add a dependency on ARCH_TEGRA, to
prevent asking the user about this driver when configuring a kernel
without NVIDIA Tegra SoC support.
Fixes: c98506206912dd0d ("pinctrl: tegra: Add Tegra264 pinmux driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
The NVIDIA Tegra238 MAIN and AON pin controllers are only present on
NVIDIA Tegra238 SoCs. Hence add a dependency on ARCH_TEGRA, to prevent
asking the user about this driver when configuring a kernel without
NVIDIA Tegra SoC support.
Fixes: 25cac7292d49f4fc ("pinctrl: tegra: Add Tegra238 pinmux driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Add 24 pin groups on ports EE, FF, GG and HH to the AON pin controller
group table (tegra238_aon_groups[]). Their pin arrays, drive-group
macros and pin descriptors were already defined, but the matching
PINGROUP() entries were not present, so these pins could not be muxed
or configured through the AON pin controller.
The pin arrays were not referenced, so the build emitted
-Wunused-const-variable warnings, and commit 119de2c33d96 ("pinctrl:
tegra238: remove unused entries") removed three of them. Restore those
arrays and add the full set of PINGROUP() entries to make the pins
usable.
Fixes: 25cac7292d49 ("pinctrl: tegra: Add Tegra238 pinmux driver")
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
pcm_spi_int, pcm_spi_cs2, pcm_spi_cs3, pcm_spi_cs4 pin groups are not
defined, so pcm_spi function can't be applied to these groups.
Fixes: 3ffeb17a9a27 ("pinctrl: airoha: add support for Airoha AN7583 PINs")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
phy1_led1 pin function wrongly refers to gpio1 instead of gpio11.
Fix it.
Fixes: 3ffeb17a9a27 ("pinctrl: airoha: add support for Airoha AN7583 PINs")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
gpio22 pin group is missed, fix it.
Fixes: 3ffeb17a9a27 ("pinctrl: airoha: add support for Airoha AN7583 PINs")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
gpio21 pin group refers to gpio22 pin, this is wrong.
Fixes: 3ffeb17a9a27 ("pinctrl: airoha: add support for Airoha AN7583 PINs")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
AN7581 have 47 valid GPIOs only (gpio0-gpio46), so gpio47 is a fiction.
AN7583 have 49 valid GPIOs (gpio0-gpio48), so gpio48 is missed
To fix an issue
* create AN7583 specific pwm pin function,
* remove gpio47 from AN7581 pwm pin function.
Fixes: 3ffeb17a9a27 ("pinctrl: airoha: add support for Airoha AN7583 PINs")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
phy4_led1 pin function maps led incorrectly. It uses the same map as
phy3_led1. PHY{X} should map to LAN{N}_PHY_LED_MAP(X-1).
Fixes: 3ffeb17a9a27 ("pinctrl: airoha: add support for Airoha AN7583 PINs")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
phy4_led1 pin function maps led incorrectly. It uses the same map as
phy3_led1. PHY{X} should map to LAN{N}_PHY_LED_MAP(X-1).
Fixes: 579839c9548c ("pinctrl: airoha: convert PHY LED GPIO to macro")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Pin 21 (gpio19) duplicate pinconf settings of pin 20. Fix it using
a proper bit number in the configuration register.
Fixes: 3ffeb17a9a27 ("pinctrl: airoha: add support for Airoha AN7583 PINs")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Pin 32 (gpio19) duplicate pinconf settings of pin 31. Fix it using
a proper bit number in the configuration register.
Fixes: 1c8ace2d0725 ("pinctrl: airoha: Add support for EN7581 SoC")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
gpio32 pin group is missed for an7583 SoC. This patch add it.
Fixes: 3ffeb17a9a27 ("pinctrl: airoha: add support for Airoha AN7583 PINs")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
gpio32 pin group is missed for an7581 SoC. This patch add it.
Fixes: 1c8ace2d0725 ("pinctrl: airoha: Add support for EN7581 SoC")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
The Allwinner A10 and H3 SoCs cannot read the state of a GPIO line when
that line is muxed for IRQ triggering (muxval 6), but only if it's
explicitly muxed for GPIO input (muxval 0). Other SoCs do not show this
behaviour, so we added a optional workaround, triggered by a quirk bit,
which triggers remuxing the pin when it's configured for IRQ, while we
need to read its value.
For some reasons this quirk flag was copied over to newer SoCs, even
though they don't show this behaviour, and the GPIO data register
reflects the true GPIO state even with a pin muxed to IRQ trigger.
Remove the unneeded quirk from the A523 family, where it's definitely
not needed (confirmed by experiments), and where it actually breaks,
because the workaround is not compatible with the newer generation
pinctrl IP used in that chip.
Together with a DT change this fixes GPIO IRQ operation on the A523
family of SoCs, as for instance used for the SD card detection.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Fixes: b8a51e95b376 ("pinctrl: sunxi: Add support for the secondary A523 GPIO ports")
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Chen-Yu Tsai <wens@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
GPIOs 38, 39, 48 and 49 support the SDC2 DATA function, while
GPIO 51 supports SDC2 CMD and GPIO 62 supports SDC2 CLK.
However, the sdc2 pin function is not listed in the corresponding
pingroup definitions, preventing these pins from being muxed for
SDC2 operation.
Add the missing sdc2 function mappings.
Fixes: 6f26989e15fb ("pinctrl: qcom: Add Eliza pinctrl driver")
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
While touching all these arrays, unify usage of whitespace in the list
terminator.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
lpi_gpio_write() became unused after the PM clock runtime conversion
switched write paths to register helper calls inside callers that already
hold an active runtime-PM reference.
With -Werror this triggers:
error: 'lpi_gpio_write' defined but not used [-Wunused-function]
Drop the dead wrapper and rename the low-level MMIO helpers from
__lpi_gpio_* to lpi_gpio_*_reg for neutral register-accessor naming.
Fixes: b719ede389d8 ("pinctrl: qcom: lpass-lpi: Switch to PM clock framework for runtime PM")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/all/f03850f6-186d-4988-a450-e6e95f24a551@kernel.org/
Signed-off-by: Ajay Kumar Nandam <ajay.nandam@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v7.2 (take three)
- Fix locking on RZ/G3L.
* tag 'renesas-pinctrl-for-v7.2-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
pinctrl: renesas: rzg2l: Use raw_spinlock_irqsave() on power source update
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Commit e785c990adcc ("pinctrl: Kconfig: drop unneeded dependencies
on OF_GPIO") removed a redundant dependecy on CONFIG_OF_GPIO for
several pinctrl drivers, but this change also removed a dependency
on CONFIG_OF for some of those drivers.
Normally, this wouldn't be a problem, but PINCTRL_STMFX also selected
MFD_STMFX, which does depend on CONFIG_OF. This conflict allows
MFD_STMFX to be enabled even if CONFIG_OF is disabled.
Fix this by also having PINCTRL_STMFX depend on CONFIG_OF. This is
okay because the pinctrl-stmfx driver actually does depend on CONFIG_OF
functions.
Fixes: e785c990adcc ("pinctrl: Kconfig: drop unneeded dependencies on OF_GPIO")
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
The correct Schmitt trigger register offset for pins 34-39 is 0xA00. Value
was verified with SoC data sheet.
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
Fixes: 82d70627e94a ("pinctrl: mediatek: Add MT8167 Pinctrl driver")
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
The correct Schmitt trigger register offset for pins 34-39 is 0xA00.
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
Fixes: 264667112ef0 ("pinctrl: mediatek: Add MT8516 Pinctrl driver")
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Commit 56ffb63749f4 ("pinctrl: qcom: add multi TLMM region option parameter")
added reg-names property based register reading. However multiple platforms
are not using the reg-names as they have only single TLMM register region.
Commit tried to handle this using the default_region module parameter,
however this condition is unreachable as the error return precedes it by
just checking if reg-names property exists or not, making it impossible
to use tlmm-test for the SoCs (x1e80100) which don't have reg-names
property in TLMM device.
Fix this by moving the default_region check at the start of the
tlmm_reg_base().
Fixes: 56ffb63749f4 ("pinctrl: qcom: add multi TLMM region option parameter")
Signed-off-by: Sneh Mankad <sneh.mankad@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
MSM_PULL_MASK currently spans bits [2:0], but the GPIO_PULL field in the
GPIO_CFG register only occupies bits [1:0]. Bit 2 belongs to
FUNC_SEL.
MSM_PULL_MASK is used to isolate the GPIO_PULL bits before writing the
pull configuration (PULL_DOWN: 0x1, PULL_UP: 0x3) to the GPIO_CFG
register. Narrow it to bits [1:0] to prevent unintended modification of
the FUNC_SEL field.
This causes no functional change since the driver currently does not
modify the FUNC_SEL bit, but align the mask with hardware configuration
nonetheless.
Signed-off-by: Sneh Mankad <sneh.mankad@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Convert the LPASS LPI pinctrl driver to use the PM clock framework for
runtime power management.
This allows the LPASS LPI pinctrl driver to drop clock votes when idle,
improves power efficiency on platforms using LPASS LPI island mode, and
aligns the driver with common runtime PM patterns used across Qualcomm
LPASS subsystems.
Guard GPIO register read/write helpers and slew-rate register programming
with synchronous runtime PM calls so the device is active during MMIO
operations whenever autosuspend is enabled.
Make PINCTRL_LPASS_LPI depend on PM_CLK, since this patch introduces
direct PM clock API use in the shared core.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Ajay Kumar Nandam <ajay.nandam@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
The LPASS LPI core conversion to PM clock framework relies on variant
drivers wiring runtime PM callbacks.
Hook up runtime PM callbacks for the LPASS LPI variant drivers touched
in this patch so they are prepared for the shared core conversion.
This commit is a preparatory NOP on its own, as runtime PM is still
disabled on these devices until the following core conversion patch.
This is a mechanical per-variant driver update that relies on the
same generic PM clock flow (of_pm_clk_add_clks() + pm_clk_suspend/
pm_clk_resume()) and DT-provided clocks.
Runtime behavior was validated on Kodiak (sc7280).
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Ajay Kumar Nandam <ajay.nandam@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
aspeed_g7_soc1_gpio_request_enable() unconditionally writes mux
function 0 to route the requested pin to GPIO. This is wrong for the
ADC-capable balls W17 through AB19 (ADC0-ADC15), where function 0
selects the ADC input and function 1 selects GPIO. Requesting one of
those GPIOs therefore muxed the ball to ADC instead.
Write mux value 1 for balls W17 through AB19 so the GPIO function is
actually selected.
Fixes: 4af4eb66aac3 ("pinctrl: aspeed: Add AST2700 SoC1 support")
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
In preparation for additional SoC support, move the Airoha pinctrl driver
for AN7581 SoC to a dedicated directory.
This is to tidy things up and keep code organized without polluting the
Mediatek driver directory.
The driver doesn't depend on any generic or common code from the Mediatek
codebase so it can be safely moved without any modification.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
The rest of the driver uses raw_spin_lock_irqsave() and
raw_spin_unlock_irqrestore() for locking. To avoid concurrency issues
or deadlocks, use raw_spinlock_irqsave() via the scoped_guard() helper
for power source updates as well.
Fixes: bbe2277dedbe ("pinctrl: renesas: rzg2l: Add support for selecting power source for {WDT,AWO,ISO}")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260603151642.4075678-2-claudiu.beznea@kernel.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
