aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2025-10-13drm/amdgpu: reduce queue timeout to 2 seconds v2Christian König2-58/+47
There has been multiple complains that 10 seconds are usually to long. The original requirement for longer timeout came from compute tests on AMDVLK, since that is no longer a topic reduce the timeout back to 2 seconds for all queues. While at it also remove any special handling for compute queues under SRIOV or pass through. v2: fix checkpatch warning. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd: Remove some unncessary header includesMario Limonciello1-3/+0
Unnecessary headers can slow down the build, drop em. No intended functional changes. Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Tested-by: Robert Beckett <bob.beckett@collabora.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd: Adjust whitespace for vangogh_pptMario Limonciello1-7/+5
A few changes have more whitespace than needed. Clean them up. Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Tested-by: Robert Beckett <bob.beckett@collabora.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amdgpu/mes: adjust the VMID masksAlex Deucher1-2/+2
The firmware limits the max vmid, but align the settings with the hw limits as well just to be safe. Reviewed-by: Shaoyun liu <Shaoyun.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amdgpu: Skip SDMA suspend during mode-2 resetLijo Lazar1-0/+4
For SDMA IP versions >= v4.4.2, firmware will take care of quiescing SDMA before mode-2 reset. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amdgpu: remove gart_window_lock usage from gmc v12Pierre-Eric Pelloux-Prayer1-2/+0
This lock was part of the SDMA workaround originally implemented in gmc_v10_0_flush_gpu_tlb (a70cb2176f7ef6f moved it to amdgpu_gmc_flush_gpu_tlb). This means this lock is useless and be safely dropped. Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amdgpu: make non-NULL out fence mandatoryPierre-Eric Pelloux-Prayer2-15/+8
amdgpu_ttm_copy_mem_to_mem has a single caller, make sure the out fence is non-NULL to simplify the code. Since none of the pointers should be NULL, we can enable __attribute__((nonnull))__. While at it make the function static since it's only used from amdgpuu_ttm.c. Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amdgpu: Remove redundant return valueLijo Lazar1-12/+6
gfx_v9_4_3_xcc_kcq_init_queue doesn't have a fail condition. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amdgpu/userq: extend userq statePrike Liang1-0/+1
Extend the userq state for identifying the userq invalid cases. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/display: Promote DC to 3.2.353Taimur Hassan1-1/+1
- [FW Promotion] Release 0.1.30.0 - Driver implementation for cursor offloading to DMU - Incorrect Mirror Cositing - Enable Dynamic DTBCLK Switch - Remove comparing uint32_t to zero - Remove inaccessible URL Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/display: [FW Promotion] Release 0.1.30.0Taimur Hassan1-0/+104
Add new SMART_POWER_HDR commands to optimize power consumption on certain OLED LED panels by sending MaxCLL per frame to TCON. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/display: Driver implementation for cursor offloading to DMUNicholas Kazlauskas25-79/+567
[Why] We require an interlock between driver and firmware for upcoming features and given that this could possibly happen on any single cursor programming call (and that we can't asynchronously wait for firmware to respond because of it) we'd be regressing cursor performance by at least an extra 40us per call. When we could possibly have cursor update every 20us - 100s from high frequency gaming mice this means that we'd be stuttering or dropping updates and impacting overall cursor performance. We want a solution that can: 1. Interlock between other firmware features 2. Not stall out or require the DMCUB lock for every single update [How] When cursor offloading is enabled and supported by an ASIC driver will route the cursor programming through to DMU as part of the regular DC stream cursor programming interfaces for attributes and position. The atomic pipe programming version will not be updated: this will still follow the existing programming path by keeping track of a field that specifies when the register writes should be deferred to DMU. Cursor locking is not required when cursor offload is in progress since the updates are consolidated and processed by DMU once at the end of the frame in a periodic manner. The shared buffer the firmware queries from is allocated along with the rest of the scratch state region in an area that's accessible by both firmware and driver. The size of the cursor offload (v1) state will not change, but it does have a unique union per ASIC version with room for expansion if needed. When firmware features notifying DMU of DRR updates are not enabled we now send an explicit vtotal min/max update via driver to DMU firmware whenever the vtotal max changes. This is to allow the cursor programming to determine the appropriate latch update point offset from vupdate. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/display: Remove comparing uint32_t to zeroAlex Hung2-8/+8
[WHAT] These *bypass are uint32_t and they will never be less than zero. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/display: Remove inaccessible URLClay King1-2/+0
[WHAT] Remove inaccessible link. Reviewed-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Clay King <clayking@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/display: Promote DC to 3.2.352Taimur Hassan1-1/+1
- Fix slice width calculation for YCbCr420 - Fix DTBCLK gating - Use NRD cap as lttpr cap - Consolidate DML2 FP guards - DML2.1 Update - Firmware Release 0.1.29.0 changes Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/display: [FW Promotion] Release 0.1.29.0Taimur Hassan1-1/+203
Add new interface for offloading cursor programming to DMUB. Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/display: Prevent Gating DTBCLK before It Is Properly LatchedFangzhi Zuo2-2/+4
[why] 1. With allow_0_dtb_clk enabled, the time required to latch DTBCLK to 600 MHz depends on the SMU. If DTBCLK is not latched to 600 MHz before set_mode completes, gating DTBCLK causes the DP2 sink to lose its clock source. 2. The existing DTBCLK gating sequence ungates DTBCLK based on both pix_clk and ref_dtbclk, but gates DTBCLK when either pix_clk or ref_dtbclk is zero. pix_clk can be zero outside the set_mode sequence before DTBCLK is properly latched, which can lead to DTBCLK being gated by mistake. [how] Consider both pixel_clk and ref_dtbclk when determining when it is safe to gate DTBCLK; this is more accurate. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/display: lttpr cap should be nrd cap in bw_alloc modePeichen Huang1-2/+36
[WHY] When bw allocation mode enabled, dpia may reports lttpr cap with reduced common cap. It would cause driver not start pre-training with max available bandwidth. [How] When bw allocation mode enabled, use NRD cap as lttpr cap. Reviewed-by: Cruise Hung <cruise.hung@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/display: Rename FAMS2 global control lock to DMUB HW control lockNicholas Kazlauskas6-45/+44
[Why] FAMS2 dictates whether the inbox0 HW lock is required, but it is not the only feature that may determine this. In order to leverage the faster inbox0 HW lock in place of the inbox1 ringbuffer based control lock it's desirable to utilize the HWSS based locking protocol FAMS2 has already implemented. [How] Rename the FAMS2 global control lock to DMUB HW control lock. This is purely a refactor with no functional change, the logic that will determine which features need to enable this HW lock will be added in a future commit. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/display: Rename should_use_dmub_lock to reflect inbox1 usageNicholas Kazlauskas6-8/+16
[Why] Newer DCN use the DMCUB HW lock via inbox0 for performance reasons while older ones will use inbox1. The should_use_dmub_lock() function does not describe whether the lock in general should be used, but whether it should be used via inbox1. [How] Rename the function to should_use_dmub_inbox1_lock() to reflect this. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/display: Support possibly NULL link for should_use_dmub_lockNicholas Kazlauskas6-20/+23
[Why] It's possible to have a stream enabled without a link or link encoder. There are cases where we'd still like to interlock the driver programming from firmware programming to ensure that we don't put the hardware in an undefined (or error) state if two programming sequences are simultaneously executed on the same hardware blocks. [How] Add an explicit DC parameter to should_use_dmub_lock(). Make pointers to should_use_dmub_lock() const since it's a checker function that shouldn't modify state. Update the callsites to pass in DC explicitly. Check that the link is non-NULL before deferencing and performing link based checks. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/display: Consolidate two DML2 FP guardsIvan Lipski1-2/+0
[Why&How] Consolidate two FP guards into one in dml2 since they are separated by one line of code, independent from the guard. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/display: Correct slice width calculation for YCbCr420Relja Vojvodic7-1/+8
[Why] -OVT compliance testing for 5120x2880p300Hz YCbCr420 was failing due to incorrect slice width being calculated [How] -Ensure slice width is divisible by 2 for 420 to comply with spec Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Relja Vojvodic <rvojvodi@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/display: DML2.1 ReintegrationAustin Zheng8-257/+336
[Summary of changes] - Updated structs - Renaming of variables for clarity Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/ras: Add unified ras module top-level makefileYiPeng Chai1-0/+34
Add unified ras module top-level makefile. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/ras: Add files to amdgpu ras manager makefileYiPeng Chai1-0/+33
Add files to amdgpu ras manager makefile. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/ras: Add amdgpu ras management function.YiPeng Chai2-0/+633
Add amdgpu system configuration parameters and functions needed by rascore. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/ras: Amdgpu preprocesses ras interruptsYiPeng Chai2-0/+163
Amdgpu preprocesses ras interrupts. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/ras: Add amdgpu ras system functionsYiPeng Chai2-0/+377
Add amdgpu ras system functions. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/ras: Amdgpu handle ras ioctl commandYiPeng Chai2-0/+418
Amdgpu handle ras ioctl command. V2: Remove non-standard device information. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/ras: Add amdgpu eeprom i2c configuration functionYiPeng Chai2-0/+208
Add amdgpu eeprom i2c configuration function. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/ras: Add amdgpu mp1 v13_0 configuration functionYiPeng Chai2-0/+124
Add amdgpu mp1 v13_0 configuration function. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/ras: Add amdgpu nbio v7_9 configuration functionYiPeng Chai3-0/+155
Add amdgpu nbio v7_9 configuration function. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/ras: Add files to ras core MakefileYiPeng Chai1-0/+44
Add files to ras core Makefile. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/ras: Add rascore unified interface functionYiPeng Chai2-0/+971
1. Complete the initialization call of all sub-functions. 2. Export common interfaces. V2: Remove the use of typedef to define function pointer. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/ras: Add cper conversion functionYiPeng Chai2-0/+614
Add cper conversion function. V3: Change commit message and update the calling function. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Signed-off-by: Xiang Liu <xiang.liu@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/ras: Use ring buffer to record ras ecc dataYiPeng Chai2-0/+403
Use ring buffer to record ras ecc data. V3: Change commit message and rename the file and function names. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/ras: Add thread to handle ras eventsYiPeng Chai2-0/+368
Add thread to handle ras events. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/ras: Add ras ioctl command handlerYiPeng Chai2-0/+952
Add ras ioctl command handler. V2: Remove ras global device list. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/ras: Add psp ras common functionsYiPeng Chai3-0/+1126
Add psp ras common functions. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/ras: Add psp v13_0 ras functionsYiPeng Chai2-0/+77
Add psp v13_0 ras functions. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/ras: Add eeprom ras functionsYiPeng Chai2-0/+1565
Add eeprom ras functions. V5: Remove duplicate data structure definition. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/ras: Add gfx common ras functionsYiPeng Chai2-0/+113
Add gfx common ras functions. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/ras: Add gfx v9_0 ras functionsYiPeng Chai2-0/+685
Add gfx v9_0 ras functions. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/ras: Add umc common ras functionsYiPeng Chai2-0/+872
Add umc common ras functions. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/ras: Add umc v12_0 ras functionsYiPeng Chai2-0/+825
Add umc v12_0 ras functions. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/ras: Add nbio common ras functionsYiPeng Chai2-0/+141
Add nbio common ras functions. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/ras: Add nbio v7_9 ras functionsYiPeng Chai2-0/+154
Add nbio v7_9 ras functions. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amdkfd: fix suspend/resume all calls in mes based eviction pathJonathan Kim1-52/+21
Suspend/resume all gangs should be done with the device lock is held. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harish Kasiviswanathan <harish.kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/ras: Add mp1 common ras functionsYiPeng Chai2-0/+131
Add mp1 common ras functions. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit