| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Xe3p_LPD has the same behavior as for Xe3_LPD with respect to DMC
context data for pipes C and D, which are lost when their power wells
are disabled. As such, let's extend the condition for Xe3_LPD in
need_pipedmc_load_mmio() to also catch Xe3p_LPD.
Bspec: 68851
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-13-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
|
|
Disable support for odd panning and size in y direction when running on
display version 35 and using semiplanar formats.
Bspec: 68903
Signed-off-by: Juha-pekka Heikkila <juha-pekka.heikkila@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-12-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
|
|
Wa_16025573575 also applies to Xe3p_LPD, so let's include it in the IP
version checks.
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-11-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
|
|
Interlace mode is officially removed from HW from Xe3p_LPD. The
register TRANS_VSYNCSHIFT and the bits in TRANS_CONF are now removed, so
make sure we do not set/get these anymore.
Bspec: 69961, 70000
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-10-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
|
|
Load the DMC firmware for Xe3p_LPD.
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-9-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
|
|
Add CDCLK table for Xe3p_LPD.
Just as with Xe3_LPD, we don't need to send voltage index info in the
PMDemand message, so we are able to re-use xe3lpd_cdclk_funcs.
With the new CDCLK table, we also need to update the maximum CDCLK value
returned by intel_update_max_cdclk().
Bspec: 68861, 68863
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-8-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
|
|
With Xe3p_LPD, the SKL_BOTTOM_COLOR_GAMMA_ENABLE and
SKL_BOTTOM_COLOR_CSC_ENABLE bits are being removed. Thus, we need not
set gamma_enable nor csc_enable in crtc_state.
Note that GAMMA_MODE.POST_CSC_GAMMA_ENABLE and CSC_MODE.ICL_CSC_ENABLE
are the documented alternatives for the bottom color bits being removed.
But as these suggested bits are being checked in state checker as part
of gamma_mode, csc_mode fields and as gamma_enable/csc_enable are not
being used anywhere else functionally post ICL, we need not set these
fields in crtc_state.
Bspec: 69734
Signed-off-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-7-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
|
|
Starting from Xe3p_LPD, linear surfaces also support horizontal flip.
Bspec: 68904
Signed-off-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-6-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
|
|
On Xe3p_LPD, the dbuf blocks fields of different registers are now
documented as 13-bit fields. The dbuf isn't really large enough to need
the 13th bit, but let's go ahead and update the definition now just in
case some new display IP in future ends up needing the larger size. The
extra bit is an unused bit in previous display versions, so we can
safely just extend the existing definition.
Bspec: 69847, 69880, 72053
Signed-off-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-5-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
|
|
Bandwidth parameters for Xe3p_LPD are the same as for Xe3_LPD. Re-use
them.
Since handling for Xe3_LPD version 30.02 is more like a special case,
let's use a "== 3002" check for it inside the ">= 30" branch instead of
adding a new branch for version 35. That allows us to re-use the ">=
30" branch for Xe3p_LPD.
v2:
- Do not have a special case for ecc_impacting_de_bw, since there are
no specific instructions in Bspec for this scenario. (Matt Roper)
v3:
- Re-use the ">= 30" branch in the if-ladder. (Matt Roper)
Bspec: 68859
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-4-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
|
|
Looking at the current if-ladder in intel_bw_init_hw(), we see that
Xe2_HPD contains two entries, differing only for ECC memories. Let's
improve readability by using braces and allowing adding extra conditions
for each case.
v2:
- Tweaked commit message, since we are not going to add the ECC case
for Xe3p_LPD anymore.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-3-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
|
|
The NDE_RSTWRN_OPT has been removed on Xe3p platforms and reset option
programming is no longer necessary during display init.
Bspec: 68846, 69137
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-2-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
|
|
Xe3p_LPD (display version 35) is similar to Xe2_LPD with respect to the
features described by struct intel_display_device_info, so reuse its
device descriptor.
v2:
- Add reference to Bspec 74201. (Shekhar)
Bspec: 74201, 74304
Signed-off-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-1-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
|
|
Wa_15016589081 applies to Xe3_LPG renderCS
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Link: https://patch.msgid.link/20251106100516.318863-2-nitin.r.gote@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
[Why]
drm_dp_mst_topology_queue_probe() is used under the assumption that
mst is already initialized. If we connect system with SST first
then switch to the mst branch during suspend, we will fail probing
topology by calling the wrong API since the mst manager is yet to
be initialized.
[How]
At dm_resume(), once it's detected as mst branc connected, check if
the mst is initialized already. If not, call
dm_helpers_dp_mst_start_top_mgr() instead to initialize mst
V2: Adjust the commit msg a bit
Fixes: bc068194f548 ("drm/amd/display: Don't write DP_MSTM_CTRL after LT")
Cc: Fangzhi Zuo <jerry.zuo@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 62320fb8d91a0bddc44a228203cfa9bfbb5395bd)
Cc: stable@vger.kernel.org
|
|
For a mode-1 reset done at the end of S3 on PSPv11 dGPUs, only check if
TOS is unloaded.
Fixes: 32f73741d6ee ("drm/amdgpu: Wait for bootloader after PSPv11 reset")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4649
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1ad25fd272753db14c5d1cc8c68e20ce01f3f888)
|
|
commit c760bcda83571 ("drm/amd: Check whether secure display TA loaded
successfully") attempted to fix extra messages, but failed to port the
cleanup that was in commit 5c6d52ff4b61e ("drm/amd: Don't try to enable
secure display TA multiple times") to prevent multiple tries.
Add that to the failure handling path even on a quick failure.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4679
Fixes: c760bcda8357 ("drm/amd: Check whether secure display TA loaded successfully")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4104c0a454f6a4d1e0d14895d03c0e7bdd0c8240)
|
|
On PF passthrough environment, after hibernate and then resume, coralgemm
will cause gpu page fault.
Mode1 reset happens during hibernate, but partition mode is not restored
on resume, register mmCP_HYP_XCP_CTL and mmCP_PSP_XCP_CTL is not right
after resume. When CP access the MQD BO, wrong stride size is used,
this will cause out of bound access on the MQD BO, resulting page fault.
The fix is to ensure gfx_v9_4_3_switch_compute_partition() is called
when resume from a hibernation.
KFD resume is called separately during a reset recovery or resume from
suspend sequence. Hence it's not required to be called as part of
partition switch.
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5d1b32cfe4a676fe552416cb5ae847b215463a1a)
|
|
The Sharp LQ116M1JW105 reports that it supports 8 bpc modes,
but it will happen display noise in some videos.
So, limit it to 6 bpc modes.
Signed-off-by: Ajye Huang <ajye_huang@compal.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20251101040043.3768848-1-ajye_huang@compal.corp-partner.google.com
|
|
Update default power1_cap to max limit for smu_v13_0_6 and smu_v13_0_12
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Only update bad page number in legacy eeprom write path.
v2: add null pointer check for con.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
drm_dp_mst_topology_queue_probe() is used under the assumption that
mst is already initialized. If we connect system with SST first
then switch to the mst branch during suspend, we will fail probing
topology by calling the wrong API since the mst manager is yet to
be initialized.
[How]
At dm_resume(), once it's detected as mst branc connected, check if
the mst is initialized already. If not, call
dm_helpers_dp_mst_start_top_mgr() instead to initialize mst
V2: Adjust the commit msg a bit
Fixes: bc068194f548 ("drm/amd/display: Don't write DP_MSTM_CTRL after LT")
Cc: Fangzhi Zuo <jerry.zuo@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
PMFW manages eeprom bad page records, update bad page loading
accrodingly.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For a mode-1 reset done at the end of S3 on PSPv11 dGPUs, only check if
TOS is unloaded.
Fixes: 32f73741d6ee ("drm/amdgpu: Wait for bootloader after PSPv11 reset")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4649
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
PMFW will manage RAS eeprom data by itself, add new interface to read
eeprom data via PMFW, we can read part of records by setting index.
v2: use IPID parse interface.
pa is not used and set it to a fixed value.
v3: optimize the null pointer check for IPID parse interface.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
So we can call it in other blocks.
v2: add a new IPID parse interface for umc and we can
implement it for each ASIC.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
commit c760bcda83571 ("drm/amd: Check whether secure display TA loaded
successfully") attempted to fix extra messages, but failed to port the
cleanup that was in commit 5c6d52ff4b61e ("drm/amd: Don't try to enable
secure display TA multiple times") to prevent multiple tries.
Add that to the failure handling path even on a quick failure.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4679
Fixes: c760bcda8357 ("drm/amd: Check whether secure display TA loaded successfully")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When amdgpu_device_health_check fails, amdgpu_ras_pre_reset
will not be called and therefore amdgpu_ras_post_reset
cannot be called either.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On PF passthrough environment, after hibernate and then resume, coralgemm
will cause gpu page fault.
Mode1 reset happens during hibernate, but partition mode is not restored
on resume, register mmCP_HYP_XCP_CTL and mmCP_PSP_XCP_CTL is not right
after resume. When CP access the MQD BO, wrong stride size is used,
this will cause out of bound access on the MQD BO, resulting page fault.
The fix is to ensure gfx_v9_4_3_switch_compute_partition() is called
when resume from a hibernation.
KFD resume is called separately during a reset recovery or resume from
suspend sequence. Hence it's not required to be called as part of
partition switch.
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
ras supports i2c eeprom for mp1 v13_0_12.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch adds the condition to not wait for
the queue response for unmap, if the gpu is in reset.
Signed-off-by: Ahmad Rehman <Ahmad.Rehman@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
unref bo after amdgpu_bo_reserve() failure as it has
called amdgpu_bo_ref() already
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
initialize max record count and record offset after table reset
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
get and check the pmfw eeprom feature bit to
decide if pmfw eeprom is supported
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add check function for pmfw eeprom
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add initialization function for pmfw eeprom
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
adapt reset function for pmfw eeprom
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The DRM_GEM_SHMEM_HELPER helper requires MMU enabled because it uses
vmf_insert_pfn() in its mmap implementation. On NOMMU configurations
(e.g. some RISC-V randconfig builds), this symbol is unavailable and
selecting DRM_GEM_SHMEM_HELPER causes a modpost undefined reference:
ERROR: modpost: "vmf_insert_pfn" [drivers/gpu/drm/drm_shmem_helper.ko] undefined!
Normally, Kconfig prevents this helper from being selected when
CONFIG_MMU=n. However, in some randconfig builds (such as those used by
0day CI), select statements can override unmet dependencies, triggering
the issue.
Add an explicit dependency on MMU to DRM_PIXPAPER to prevent this.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202510280213.0rlYA4T3-lkp@intel.com/
Fixes: 0c4932f6ddf8 ("drm/tiny: pixpaper: Fix missing dependency on DRM_GEM_SHMEM_HELPER")
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: LiangCheng Wang <zaq14760@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20251028-bar-v1-1-edfbd13fafff@gmail.com
|
|
Stephen Rothwell reports htmldocs warnings when merging drm-misc tree:
Documentation/gpu/drm-mm:40: include/drm/ttm/ttm_device.h:225: ERROR: Unknown target name: "ttm_allocation". [docutils]
Documentation/gpu/drm-mm:43: drivers/gpu/drm/ttm/ttm_device.c:202: ERROR: Unknown target name: "ttm_allocation". [docutils]
Documentation/gpu/drm-mm:73: include/drm/ttm/ttm_pool.h:68: ERROR: Unknown target name: "ttm_allocation_pool". [docutils]
Documentation/gpu/drm-mm:76: drivers/gpu/drm/ttm/ttm_pool.c:1070: ERROR: Unknown target name: "ttm_allocation_pool". [docutils]
Fix these by adding missing wildcard on TTM_ALLOCATION_* and
TTM_ALLOCATION_POOL_* in @alloc_flags description.
Fixes: 0af5b6a8f8dd ("drm/ttm: Replace multiple booleans with flags in pool init")
Fixes: 77e19f8d3297 ("drm/ttm: Replace multiple booleans with flags in device init")
Fixes: 402b3a865090 ("drm/ttm: Add an allocation flag to propagate -ENOSPC on OOM")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20251105161838.55b962a3@canb.auug.org.au/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20251106005217.14026-1-bagasdotme@gmail.com
|
|
8 and 16 bit formats use a different layout on
GB20x than they did on prior chips. Add the
corresponding DRM format modifiers to the list of
modifiers supported by the display engine on such
chips, and filter the supported modifiers for each
format based on its bytes per pixel in
nv50_plane_format_mod_supported().
Note this logic will need to be updated when GB10
support is added, since it is a GB20x chip that
uses the pre-GB20x sector layout for all formats.
Fixes: 6cc6e08d4542 ("drm/nouveau/kms: add support for GB20x")
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030181153.1208-3-jajones@nvidia.com
|
|
Set the DMA mask before calling nvkm_device_ctor(), so that when the
flush page is created in nvkm_fb_ctor(), the allocation will not fail
if the page is outside of DMA address space, which can easily happen if
IOMMU is disable. In such situations, you will get an error like this:
nouveau 0000:65:00.0: DMA addr 0x0000000107c56000+4096 overflow (mask ffffffff, bus limit 0).
Commit 38f5359354d4 ("rm/nouveau/pci: set streaming DMA mask early")
set the mask after calling nvkm_device_ctor(), but back then there was
no flush page being created, which might explain why the mask wasn't
set earlier.
Flush page allocation was added in commit 5728d064190e ("drm/nouveau/fb:
handle sysmem flush page from common code"). nvkm_fb_ctor() calls
alloc_page(), which can allocate a page anywhere in system memory, but
then calls dma_map_page() on that page. But since the DMA mask is still
set to 32, the map can fail if the page is allocated above 4GB. This is
easy to reproduce on systems with a lot of memory and IOMMU disabled.
An alternative approach would be to force the allocation of the flush
page to low memory, by specifying __GFP_DMA32. However, this would
always allocate the page in low memory, even though the hardware can
access high memory.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20251014174512.3172102-1-ttabi@nvidia.com
|
|
Fixes two issues in intel_pipedmc_irq_handler():
- Removed an extra ']' in the PIPEDMC error and interrupt vector log.
- Corrected the interrupt vector log to print int_vector instead of tmp,
as tmp will be zero in this case.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251103132337.762156-1-alok.a.tiwari@oracle.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
It's currently not possible to safely monitor if there's throttling
happening and what are the reasons. The approach of reading the status
and then reading the reasons is not reliable as by the time sysadmin
reads the reason, the throttling could not be happening anymore.
Previous tentative to fix that[1] was breaking the ABI and potentially
sysadmin's scripts. This takes a different approach of adding and
documenting the additional attribute. It's still valuable, though
redundant, to provide the simpler 0/1 interface.
In order to avoid userspace knowledge on the bitmask meaning and to be
able to maintain the kernel side in sync with possible changes in
future, just walk the attribute group and check what are the masks that
match the value read.
[1] https://lore.kernel.org/intel-xe/20241025092238.167042-1-raag.jadav@intel.com/
Cc: Raag Jadav <raag.jadav@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20251104-gt-throttle-cri-v5-1-4948b060bbfd@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Clang is not happy with set but unused variable (this is visible
with `make LLVM=1` build:
drivers/gpu/drm/xe/xe_vm.c:1462:11: error: variable 'number_tiles' set
but not used [-Werror,-Wunused-but-set-variable]
The use of this variable was removed in the commit mentioned below as
"Fixes:" but only its declaration and update remain.
It seems like the variable is not used along with the assignment that
does not have side effects as far as I can see.
Remove those altogether.
Fixes: cb99e12ba8cb ("drm/xe: Decouple bind queue last fence from TLB invalidations")
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patch.msgid.link/20251105011311.3177875-1-gwan-gyeong.mun@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
The Mesa issue referenced below pointed out a possible deadlock:
[ 1231.611031] Possible interrupt unsafe locking scenario:
[ 1231.611033] CPU0 CPU1
[ 1231.611034] ---- ----
[ 1231.611035] lock(&xa->xa_lock#17);
[ 1231.611038] local_irq_disable();
[ 1231.611039] lock(&fence->lock);
[ 1231.611041] lock(&xa->xa_lock#17);
[ 1231.611044] <Interrupt>
[ 1231.611045] lock(&fence->lock);
[ 1231.611047]
*** DEADLOCK ***
In this example, CPU0 would be any function accessing job->dependencies
through the xa_* functions that don't disable interrupts (eg:
drm_sched_job_add_dependency(), drm_sched_entity_kill_jobs_cb()).
CPU1 is executing drm_sched_entity_kill_jobs_cb() as a fence signalling
callback so in an interrupt context. It will deadlock when trying to
grab the xa_lock which is already held by CPU0.
Replacing all xa_* usage by their xa_*_irq counterparts would fix
this issue, but Christian pointed out another issue: dma_fence_signal
takes fence.lock and so does dma_fence_add_callback.
dma_fence_signal() // locks f1.lock
-> drm_sched_entity_kill_jobs_cb()
-> foreach dependencies
-> dma_fence_add_callback() // locks f2.lock
This will deadlock if f1 and f2 share the same spinlock.
To fix both issues, the code iterating on dependencies and re-arming them
is moved out to drm_sched_entity_kill_jobs_work().
Cc: stable@vger.kernel.org # v6.2+
Fixes: 2fdb8a8f07c2 ("drm/scheduler: rework entity flush, kill and fini")
Link: https://gitlab.freedesktop.org/mesa/mesa/-/issues/13908
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
[phasta: commit message nits]
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20251104095358.15092-1-pierre-eric.pelloux-prayer@amd.com
|
|
Use `from_bytes_copy_prefix` to create `NpdeStruct` instead of building
it ourselves from the bytes stream. This lets us remove a few array
accesses and results in shorter code.
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251029-nova-vbios-frombytes-v1-5-ac441ebc1de3@nvidia.com>
|
|
Use `from_bytes_copy_prefix` to create `BitHeader` instead of building
it ourselves from the bytes stream. This lets us remove a few array
accesses and results in shorter code.
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251029-nova-vbios-frombytes-v1-4-ac441ebc1de3@nvidia.com>
|
|
Use `from_bytes_copy_prefix` to create `PcirStruct` instead of building
it ourselves from the bytes stream. This lets us remove a few array
accesses and results in shorter code.
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251029-nova-vbios-frombytes-v1-3-ac441ebc1de3@nvidia.com>
|
|
Use `from_bytes_copy_prefix` to create the `PmuLookupTable` header
instead of building it ourselves from the bytes stream. This lets us
remove a few `as` conversions and array accesses.
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251029-nova-vbios-frombytes-v1-2-ac441ebc1de3@nvidia.com>
|
|
The rcar_du_crtc_cleanup() function has a void return type, but
incorrectly uses a return statement with a call to drm_crtc_cleanup(),
which also returns void.
Remove the return statement to ensure proper function semantics.
No functional change intended.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20251017191634.1454201-1-alok.a.tiwari@oracle.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
