| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
While pausing submissions, it is possible to encouner an exec queue
which is during creation, and therefore doesn't have a valid xe_lrc
struct reference.
Protect agains such situation, by checking for NULL before access.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Fixes: c25c1010df88 ("drm/xe/vf: Replay GuC submission state on pause / unpause")
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251124222853.1900800-1-tomasz.lis@intel.com
|
|
The LRC software ring tail is reset to the first unsignaled pending
job's head.
Fix the re-emission logic to begin submitting from the first unsignaled
job detected, rather than scanning all pending jobs, which can cause
imbalance.
v2:
- Include missing local changes
v3:
- s/skip_replay/restore_replay (Tomasz)
Fixes: c25c1010df88 ("drm/xe/vf: Replay GuC submission state on pause / unpause")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://patch.msgid.link/20251121152750.240557-1-matthew.brost@intel.com
|
|
The MERT block triggers an interrupt when a catastrophic error occurs.
Update the interrupt handler to read the MERT catastrophic error type
and log appropriate debug message.
Signed-off-by: Lukasz Laguna <lukasz.laguna@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251124190237.20503-5-lukasz.laguna@intel.com
|
|
Add support for triggering and handling MERT TLB invalidation. After
LMTT updates, the MERT TLB invalidation is initiated to ensure memory
translations remain coherent.
Completion of the invalidation is signaled via MERT interrupt (bit 13 in
the GFX master interrupt register). Detect and handle this interrupt to
properly synchronize the invalidation flow.
Signed-off-by: Lukasz Laguna <lukasz.laguna@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251124190237.20503-4-lukasz.laguna@intel.com
|
|
On platforms with standalone MERT, the PF driver needs to program LMTT
in MERT's LMEM_CFG register.
Signed-off-by: Lukasz Laguna <lukasz.laguna@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251124190237.20503-3-lukasz.laguna@intel.com
|
|
The MERT subsystem manages memory accesses between host and device. On
the Crescent Island platform, it requires direct management by the
driver.
Introduce a device flag and corresponding helpers to identify platforms
with standalone MERT, enabling proper initialization and handling.
Signed-off-by: Lukasz Laguna <lukasz.laguna@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251124190237.20503-2-lukasz.laguna@intel.com
|
|
While we want to refactor intel_clock_gating.[ch] and likely move a lot
of display related code to display, start off with a little intermediate
change to use struct drm_device in the interface instead of struct
drm_i915_private, to allow us to drop another dependency on i915_drv.h
and struct drm_i915_private.
Cc: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patch.msgid.link/20251121112200.3435099-2-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
intel_cdclk.c no longer needs i915_drv.h. Drop it.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patch.msgid.link/20251121112200.3435099-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The selective fetch code doesn't handle asycn flips correctly.
There is a nonsense check for async flips in
intel_psr2_sel_fetch_config_valid() but that only gets called
for modesets/fastsets and thus does nothing for async flips.
Currently intel_async_flip_check_hw() is very unhappy as the
selective fetch code pulls in planes that are not even async
flips capable.
Reject async flips when selective fetch is enabled, until
someone fixes this properly (ie. disable selective fetch while
async flips are being issued).
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251105171015.22234-1-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
(cherry picked from commit a5f0cc8e0cd4007370af6985cb152001310cf20c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Move the calls to drm_fb_helper_alloc_info() from drivers into a
single place in fbdev helpers. Allocates struct fb_info for a new
framebuffer device. Then call drm_fb_helper_single_fb_probe() to
create an fbdev screen buffer. Also release the instance on errors
by calling drm_fb_helper_release_info().
Simplifies the code and fixes the error cleanup for some of the
drivers.
Regular release of the struct fb_info instance still happens in
drm_fb_helper_fini() as before.
v2:
- remove error rollback in driver implementations (kernel test robot)
- initialize info in TTM implementation (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com> # radeon
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> # msm
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20251027081245.80262-1-tzimmermann@suse.de
|
|
Protect vga_switcheroo_client_fb_set() with console lock. Avoids OOB
access in fbcon_remap_all(). Without holding the console lock the call
races with switching outputs.
VGA switcheroo calls fbcon_remap_all() when switching clients. The fbcon
function uses struct fb_info.node, which is set by register_framebuffer().
As the fb-helper code currently sets up VGA switcheroo before registering
the framebuffer, the value of node is -1 and therefore not a legal value.
For example, fbcon uses the value within set_con2fb_map() [1] as an index
into an array.
Moving vga_switcheroo_client_fb_set() after register_framebuffer() can
result in VGA switching that does not switch fbcon correctly.
Therefore move vga_switcheroo_client_fb_set() under fbcon_fb_registered(),
which already holds the console lock. Fbdev calls fbcon_fb_registered()
from within register_framebuffer(). Serializes the helper with VGA
switcheroo's call to fbcon_remap_all().
Although vga_switcheroo_client_fb_set() takes an instance of struct fb_info
as parameter, it really only needs the contained fbcon state. Moving the
call to fbcon initialization is therefore cleaner than before. Only amdgpu,
i915, nouveau and radeon support vga_switcheroo. For all other drivers,
this change does nothing.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://elixir.bootlin.com/linux/v6.17/source/drivers/video/fbdev/core/fbcon.c#L2942 # [1]
Fixes: 6a9ee8af344e ("vga_switcheroo: initial implementation (v15)")
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Cc: <stable@vger.kernel.org> # v2.6.34+
Link: https://patch.msgid.link/20251105161549.98836-1-tzimmermann@suse.de
|
|
Restore the log client's output when the DRM core invokes the restore
callback. Follow the existing behavior of fbdev emulation wrt. the
value of the force parameter.
If force is false, acquire the DRM master lock and reprogram the
display. This is the case when the user-space compositor exits and
the DRM core transfers the display back to the in-kernel client. This
also enables drm_log output during reboot and shutdown.
If force is true, reprogram without considering the master lock. This
overrides the current compositor and prints the log to the screen. In
case of system malfunction, users can enter SysRq+v to invoke the
emergency error reporting. See Documentation/admin-guide/sysrq.rst for
more information.
v2:
- s/exists/exits/ in second paragraph of commit description
- fix grammar in commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20251110154616.539328-4-tzimmermann@suse.de
|
|
Move the sysrq functionality from DRM fbdev helpers to the DRM device
and in-kernel clients, so that it becomes available on all clients.
DRM fbdev helpers support emergency restoration of the console output
via a special key combination. Press SysRq+v to replace the current
compositor with the kernel's output on the framebuffer console. This
allows users to see the log messages during system emergencies.
By moving the functionality from fbdev helpers to the DRM device, any
in-kernel client can serve as emergency output. This can be used to
bring up drm_log, for example.
Each DRM device registers itself to the list of possible sysrq handlers.
On receiving SysRq+v, the DRM core goes over all registered devices and
restores an in-kernel DRM client for each of them.
See Documentation/admin-guide/sysrq.rst on how to invoke SysRq. Switch
VTs to bring back the user-space compositor.
v2:
- declare placeholders as 'static inline' (kernel test robot)
- fix grammar in commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20251110154616.539328-3-tzimmermann@suse.de
|
|
Add force parameter to client restore and pass value through the
layers. The only currently used value is false.
If force is true, the client should restore its display even if it
does not hold the DRM master lock. This is be required for emergency
output, such as sysrq.
While at it, inline drm_fb_helper_lastclose(), which is a trivial
wrapper around drm_fb_helper_restore_fbdev_mode_unlocked().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20251110154616.539328-2-tzimmermann@suse.de
|
|
Enable MIGRATE_VMA_SELECT_COMPOUND support in nouveau driver to take
advantage of THP zone device migration capabilities.
Update migration and eviction code paths to handle compound page sizes
appropriately, improving memory bandwidth utilization and reducing
migration overhead for large GPU memory allocations.
[balbirs@nvidia.com: fix sparse error]
Link: https://lkml.kernel.org/r/20251115003333.3516870-1-balbirs@nvidia.com
Link: https://lkml.kernel.org/r/20251001065707.920170-17-balbirs@nvidia.com
Signed-off-by: Balbir Singh <balbirs@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: Ying Huang <ying.huang@linux.alibaba.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mika Penttilä <mpenttil@redhat.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Change page_free to folio_free to make the folio support for
zone device-private more consistent. The PCI P2PDMA callback
has also been updated and changed to folio_free() as a result.
For drivers that do not support folios (yet), the folio is
converted back into page via &folio->page and the page is used
as is, in the current callback implementation.
Link: https://lkml.kernel.org/r/20251001065707.920170-3-balbirs@nvidia.com
Signed-off-by: Balbir Singh <balbirs@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: Ying Huang <ying.huang@linux.alibaba.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mika Penttilä <mpenttil@redhat.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: support device-private THP", v7.
This patch series introduces support for Transparent Huge Page (THP)
migration in zone device-private memory. The implementation enables
efficient migration of large folios between system memory and
device-private memory
Background
Current zone device-private memory implementation only supports PAGE_SIZE
granularity, leading to:
- Increased TLB pressure
- Inefficient migration between CPU and device memory
This series extends the existing zone device-private infrastructure to
support THP, leading to:
- Reduced page table overhead
- Improved memory bandwidth utilization
- Seamless fallback to base pages when needed
In my local testing (using lib/test_hmm) and a throughput test, the series
shows a 350% improvement in data transfer throughput and a 80% improvement
in latency
These patches build on the earlier posts by Ralph Campbell [1]
Two new flags are added in vma_migration to select and mark compound
pages. migrate_vma_setup(), migrate_vma_pages() and
migrate_vma_finalize() support migration of these pages when
MIGRATE_VMA_SELECT_COMPOUND is passed in as arguments.
The series also adds zone device awareness to (m)THP pages along with
fault handling of large zone device private pages. page vma walk and the
rmap code is also zone device aware. Support has also been added for
folios that might need to be split in the middle of migration (when the
src and dst do not agree on MIGRATE_PFN_COMPOUND), that occurs when src
side of the migration can migrate large pages, but the destination has not
been able to allocate large pages. The code supported and used
folio_split() when migrating THP pages, this is used when
MIGRATE_VMA_SELECT_COMPOUND is not passed as an argument to
migrate_vma_setup().
The test infrastructure lib/test_hmm.c has been enhanced to support THP
migration. A new ioctl to emulate failure of large page allocations has
been added to test the folio split code path. hmm-tests.c has new test
cases for huge page migration and to test the folio split path. A new
throughput test has been added as well.
The nouveau dmem code has been enhanced to use the new THP migration
capability.
mTHP support:
The patches hard code, HPAGE_PMD_NR in a few places, but the code has been
kept generic to support various order sizes. With additional refactoring
of the code support of different order sizes should be possible.
The future plan is to post enhancements to support mTHP with a rough
design as follows:
1. Add the notion of allowable thp orders to the HMM based test driver
2. For non PMD based THP paths in migrate_device.c, check to see if
a suitable order is found and supported by the driver
3. Iterate across orders to check the highest supported order for migration
4. Migrate and finalize
The mTHP patches can be built on top of this series, the key design
elements that need to be worked out are infrastructure and driver support
for multiple ordered pages and their migration.
HMM support for large folios was added in 10b9feee2d0d ("mm/hmm:
populate PFNs from PMD swap entry").
This patch (of 16)
Add routines to support allocation of large order zone device folios and
helper functions for zone device folios, to check if a folio is device
private and helpers for setting zone device data.
When large folios are used, the existing page_free() callback in pgmap is
called when the folio is freed, this is true for both PAGE_SIZE and higher
order pages.
Zone device private large folios do not support deferred split and scan
like normal THP folios.
Link: https://lkml.kernel.org/r/20251001065707.920170-1-balbirs@nvidia.com
Link: https://lkml.kernel.org/r/20251001065707.920170-2-balbirs@nvidia.com
Link: https://lore.kernel.org/linux-mm/20201106005147.20113-1-rcampbell@nvidia.com/ [1]
Signed-off-by: Balbir Singh <balbirs@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: Ying Huang <ying.huang@linux.alibaba.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mika Penttilä <mpenttil@redhat.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Ensure that the DMA address of the framebuffer flush page is not larger
than its hardware register.
On GPUs older than Hopper, the register for the address can hold up to a
40-bit address (right-shifted by 8 so that it fits in the 32-bit
register), and on Hopper and later it can be 52 bits (64-bit register
where bits 52-63 must be zero).
Recently it was discovered that under certain conditions, the flush page
could be allocated outside this range. Although this bug was fixed, we
can ensure that any future changes to this code don't accidentally
generate an invalid page address.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20251113230323.1271726-2-ttabi@nvidia.com
|
|
The flush page DMA address is stored in a special register that is not
associated with the GPU's standard DMA range. For example, on Turing,
the GPU's MMU can handle 47-bit addresses, but the flush page address
register is limited to 40 bits.
At the point during device initialization when the flush page is
allocated, the DMA mask is still at its default of 32 bits. So even
though it's unlikely that the flush page could exist above a 40-bit
address, the dma_map_page() call could fail, e.g. if IOMMU is disabled
and the address is above 32 bits. The simplest way to achieve all
constraints is to allocate the page in the DMA32 zone. Since the flush
page is literally just a page, this is an acceptable limitation. The
alternative is to temporarily set the DMA mask to 40 (or 52 for Hopper
and later) bits, but that could have unforseen side effects.
In situations where the flush page is allocated above 32 bits and IOMMU
is disabled, you will get an error like this:
nouveau 0000:65:00.0: DMA addr 0x0000000107c56000+4096 overflow (mask ffffffff, bus limit 0).
Fixes: 5728d064190e ("drm/nouveau/fb: handle sysmem flush page from common code")
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20251113230323.1271726-1-ttabi@nvidia.com
|
|
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "uint64_t *", but the returned type, while matching,
will be const qualified. As there is no general way to remove const
qualifiers, adjust the allocation type to match the assignment.
Link: https://patch.msgid.link/20250426061325.work.665-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
The fault injection test can cause the xe_huc_auth function to fail.
This is an intentional failure, so in this scenario we don't want to
throw an assert and taint the kernel, because that will impact CI
execution.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20251027214212.2856903-1-zhanjun.dong@intel.com
|
|
Cleanup GuC log buffer macros and helpers, add Xe style macro prefix.
Update buffer type values to align with the GuC specification
Update buffer offset calculation.
Remove helper functions, replaced with macros.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20251105233143.1168759-1-zhanjun.dong@intel.com
|
|
Reserve vm invalidation engine 6 when uni_mes enabled. It
is used in processing tlb flush request from host.
Signed-off-by: Michael Chen <michael.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Shaoyun liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 873373739b9b150720ea2c5390b4e904a4d21505)
Cc: stable@vger.kernel.org
|
|
This will fix the following error seen on some 32-bit config:
"ERROR: modpost: "__udivdi3" [drivers/gpu/drm/xe/xe.ko] undefined!"
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511150929.3vUi6PEJ-lkp@intel.com/
Fixes: e448372e8a8e ("drm/xe/pf: Use migration-friendly GGTT auto-provisioning")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20251115151323.10828-1-michal.wajdeczko@intel.com
|
|
v1:
- make pp_table invisible on VF mode (only valid on BM)
- make pp_table invisible on Mi* chips (Not supported)
- make pp_table invisible if scpm feature is enabled.
v2:
move pp_table invisible code logic into amdgpu_dpm_get_pp_table() function.
v3:
add table buffer pointer check both on powerplay & swsmu.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The original patch introduced additional latency during boot time
because it triggers a driver reload to avoid a CP hang when the driver
is reloaded multiple times. This has been addressed with a more generic
solution that triggers the GPU reset only during the unload phase,
avoiding extra latency during boot time. For this reason, this commit
reverts the original change.
This reverts commit 72a98763b473890e6605604bfcaf71fc212b4720.
This patch should only be applied if commit:
4355e61835e7 ("drm/amdgpu: Fix GFX hang on SteamDeck when amdgpu is reloaded")
is present.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When trying to unload amdgpu in the SteamDeck (TTY mode), the following
set of errors happens and the system gets unstable:
[..]
[drm] Initialized amdgpu 3.64.0 for 0000:04:00.0 on minor 0
amdgpu 0000:04:00.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on gfx_0.0.0 (-110).
amdgpu 0000:04:00.0: amdgpu: ib ring test failed (-110).
[..]
amdgpu 0000:04:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000
amdgpu 0000:04:00.0: amdgpu: Failed to disable gfxoff!
amdgpu 0000:04:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000
amdgpu 0000:04:00.0: amdgpu: Failed to disable gfxoff!
[..]
When the driver initializes the GPU, the PSP validates all the firmware
loaded, and after that, it is not possible to load any other firmware
unless the device is reset. What is happening in the load/unload
situation is that PSP halts the GC engine because it suspects that
something is amiss. To address this issue, this commit ensures that the
GPU is reset (mode 2 reset) in the unload sequence.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
v1:
- fix amdgpu_irq enabled counter unbalanced issue on smu_v11_0_disable_thermal_alert.
v2:
- re-enable smu thermal alert to make amdgpu irq counter balance for smu v11.0 if in runpm state
[75582.361561] ------------[ cut here ]------------
[75582.361565] WARNING: CPU: 42 PID: 533 at drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c:639 amdgpu_irq_put+0xd8/0xf0 [amdgpu]
...
[75582.362211] Tainted: [E]=UNSIGNED_MODULE
[75582.362214] Hardware name: GIGABYTE MZ01-CE0-00/MZ01-CE0-00, BIOS F14a 08/14/2020
[75582.362218] Workqueue: pm pm_runtime_work
[75582.362225] RIP: 0010:amdgpu_irq_put+0xd8/0xf0 [amdgpu]
[75582.362556] Code: 31 f6 31 ff e9 c9 bf cf c2 44 89 f2 4c 89 e6 4c 89 ef e8 db fc ff ff 5b 41 5c 41 5d 41 5e 5d 31 d2 31 f6 31 ff e9 a8 bf cf c2 <0f> 0b eb c3 b8 fe ff ff ff eb 97 e9 84 e8 8b 00 0f 1f 84 00 00 00
[75582.362560] RSP: 0018:ffffd50d51297b80 EFLAGS: 00010246
[75582.362564] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
[75582.362568] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[75582.362570] RBP: ffffd50d51297ba0 R08: 0000000000000000 R09: 0000000000000000
[75582.362573] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8e72091d2008
[75582.362576] R13: ffff8e720af80000 R14: 0000000000000000 R15: ffff8e720af80000
[75582.362579] FS: 0000000000000000(0000) GS:ffff8e9158262000(0000) knlGS:0000000000000000
[75582.362582] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[75582.362585] CR2: 000074869d040c14 CR3: 0000001e37a3e000 CR4: 00000000003506f0
[75582.362588] Call Trace:
[75582.362591] <TASK>
[75582.362597] smu_v11_0_disable_thermal_alert+0x17/0x30 [amdgpu]
[75582.362983] smu_smc_hw_cleanup+0x79/0x4f0 [amdgpu]
[75582.363375] smu_suspend+0x92/0x110 [amdgpu]
[75582.363762] ? gfx_v10_0_hw_fini+0xd5/0x150 [amdgpu]
[75582.364098] amdgpu_ip_block_suspend+0x27/0x80 [amdgpu]
[75582.364377] ? timer_delete_sync+0x10/0x20
[75582.364384] amdgpu_device_ip_suspend_phase2+0x190/0x450 [amdgpu]
[75582.364665] amdgpu_device_suspend+0x1ae/0x2f0 [amdgpu]
[75582.364948] amdgpu_pmops_runtime_suspend+0xf3/0x1f0 [amdgpu]
[75582.365230] pci_pm_runtime_suspend+0x6d/0x1f0
[75582.365237] ? __pfx_pci_pm_runtime_suspend+0x10/0x10
[75582.365242] __rpm_callback+0x4c/0x190
[75582.365246] ? srso_return_thunk+0x5/0x5f
[75582.365252] ? srso_return_thunk+0x5/0x5f
[75582.365256] ? ktime_get_mono_fast_ns+0x43/0xe0
[75582.365263] rpm_callback+0x6e/0x80
[75582.365267] rpm_suspend+0x124/0x5f0
[75582.365271] ? srso_return_thunk+0x5/0x5f
[75582.365275] ? __schedule+0x439/0x15e0
[75582.365281] ? srso_return_thunk+0x5/0x5f
[75582.365285] ? __queue_delayed_work+0xb8/0x180
[75582.365293] pm_runtime_work+0xc6/0xe0
[75582.365297] process_one_work+0x1a1/0x3f0
[75582.365303] worker_thread+0x2ba/0x3d0
[75582.365309] kthread+0x107/0x220
[75582.365313] ? __pfx_worker_thread+0x10/0x10
[75582.365318] ? __pfx_kthread+0x10/0x10
[75582.365323] ret_from_fork+0xa2/0x120
[75582.365328] ? __pfx_kthread+0x10/0x10
[75582.365332] ret_from_fork_asm+0x1a/0x30
[75582.365343] </TASK>
[75582.365345] ---[ end trace 0000000000000000 ]---
[75582.365350] amdgpu 0000:05:00.0: amdgpu: Fail to disable thermal alert!
[75582.365379] amdgpu 0000:05:00.0: amdgpu: suspend of IP block <smu> failed -22
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reserve vm invalidation engine 6 when uni_mes enabled. It
is used in processing tlb flush request from host.
Signed-off-by: Michael Chen <michael.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Shaoyun liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
After (checks watch) a little over two years I finally investigated the
boot warning on my Thinkpad X13s and it was caused by the conservative
timings warning in panel-edp.c . The X13s was sold with a variety of
different panel versions; I have the 300 nit multi-touch variant.
I have been unable to secure panel documentation so the I copied the
timings from NV133WUM-N63.
The raw EDID is:
00 ff ff ff ff ff ff 00 09 e5 84 0a 00 00 00 00
1e 1f 01 04 a5 1d 12 78 03 5c 70 a6 51 4c 9c 26
0e 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 74 3c 80 a0 70 b0 28 40 30 20
36 00 1e b3 10 00 00 1a 00 00 00 fd 00 28 3c 4b
4b 10 01 0a 20 20 20 20 20 20 00 00 00 fe 00 42
4f 45 20 48 46 0a 20 20 20 20 20 20 00 00 00 fe
00 4e 56 31 33 33 57 55 4d 2d 54 30 31 0a 00 51
Signed-off-by: Daniel Thompson <daniel@riscstar.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20251121-x13s-touchscreen-loopup-v2-1-75b03838e28f@riscstar.com
|
|
Add support for the transparent ASL CS5263 DP-to-HDMI bridge.
Signed-off-by: Ettore Chimenti <ettore.chimenti@linaro.org>
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251121142623.251118-4-ggo@tuxedocomputers.com
|
|
Make sure to drop the references taken to the vtg devices by
of_find_device_by_node() when looking up their driver data during
component probe.
Note that holding a reference to a platform device does not prevent its
driver data from going away so there is no point in keeping the
reference after the lookup helper returns.
Fixes: cc6b741c6f63 ("drm: sti: remove useless fields from vtg structure")
Cc: stable@vger.kernel.org # 4.16
Cc: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20250922122012.27407-1-johan@kernel.org
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
|
|
When tick counts are large and multiplication by MSEC_PER_SEC is larger
than 64 bits, the conversion from clock ticks to milliseconds can go bad.
Use mul_u64_u32_div() instead.
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Suggested-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Fixes: 49cc215aad7f ("drm/xe: Add xe_gt_clock_interval_to_ms helper")
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/1562f1b62d5be3fbaee100f09107f3cc49e40dd1.1763408584.git.harish.chegondi@intel.com
|
|
For a port used with lane reversal enabled the first two TX lanes will
be enabled in PHY lane#1 instead of PHY lane#0. At the moment the HW
readout will read out the power-down state for these two TX lanes from
PHY lane#0 incorrectly. The display HW lane reversal feature (vs. the
similar TCSS lane swap) is only used for TypeC legacy mode and for
non-TypeC PHYs. Since in both of these cases the display owns both PHY
lanes, both of these PHY lanes' state can be read out. Do that to fix
cases when lane reversal is used with 1 or 2 active TX lanes.
While at it add an assert to the PLL enable function about the above
assumption on when lane reversal can be used.
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Fixes: 230d4c748113 ("drm/i915/cx0: Track the Cx0 PHY enabled lane count in the PLL state")
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251120172358.1282765-5-imre.deak@intel.com
|
|
If the number of used lanes is 1 or 2 then the power-down state of both
TX lanes in PHY lane 0 should be read out. If 1 lane is used only 1 TX
lane will be checked, make sure both TXs are checked in this case.
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Fixes: 230d4c748113 ("drm/i915/cx0: Track the Cx0 PHY enabled lane count in the PLL state")
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251120172358.1282765-4-imre.deak@intel.com
|
|
Use intel_port_to_tc() in mtl_port_to_pll_id(), instead of open coding
the same.
v2: s/USe/Use in commit message.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251120172358.1282765-3-imre.deak@intel.com
|
|
intel_port_to_tc() returns the PORT_TC1..6 -> TC_PORT_1..6 mapping only
for DDI ports that are connected to a TypeC PHY. In some cases this
mapping is also required for TypeC DDI ports which are not connected to
a TypeC PHY. Such DDI ports are the PORT_TC1..4 ports on RKL/ADLS/BMG.
Add a separate intel_tc_phy_to_tc() helper to return the mapping for
ports connected to a TypeC PHY, and make all the current users - which
expect this semantic - call this helper. A follow-up change will need to
get the same mapping for TypeC DDI ports not connected to a TypeC PHY,
leave intel_port_to_tc() exported for that.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251120172358.1282765-2-imre.deak@intel.com
|
|
The intel_port_to_tc() call in mtl_port_to_pll_id() assumed that all
TypeC DDI ports are connected to a TypeC PHY. This is not true on BMG
where all the ports - including the PORT_TC1..4 TypeC DDI ports - are
connected to a non-TypeC PHY. For these ports intel_port_to_tc()
returns TC_PORT_NONE, which results in an incorrect port -> PLL ID
mapping. Fix this up by using the expected PORT_TC1..4 port ->
TC_PORT_1..4 tc_port mapping on BMG as well.
Fixes: ca1eda5cd476c ("drm/i915/cx0: Add MTL+ .get_dplls hook")
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251120172358.1282765-1-imre.deak@intel.com
|
|
Better split CONFIG_DRM_XE_DEBUG and CONFIG_DRM_XE_DEBUG_GUC optional
parts from the main code, creating smaller ct_dead_* and fast_req_*
interfaces.
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20251119152157.1675188-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Add missing stack_depot_init() call when CONFIG_DRM_XE_DEBUG_GUC is
enabled to fix the following call stack:
[] BUG: kernel NULL pointer dereference, address: 0000000000000000
[] Workqueue: drm_sched_run_job_work [gpu_sched]
[] RIP: 0010:stack_depot_save_flags+0x172/0x870
[] Call Trace:
[] <TASK>
[] fast_req_track+0x58/0xb0 [xe]
Fixes: 16b7e65d299d ("drm/xe/guc: Track FAST_REQ H2Gs to report where errors came from")
Tested-by: Sagar Ghuge <sagar.ghuge@intel.com>
Cc: stable@vger.kernel.org # v6.17+
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20251118-fix-debug-guc-v1-1-9f780c6bedf8@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Automated testing caught this missing doc comment; add something suitable
(and useful).
Fixes: 330e76d31697 ("drm/imagination: Add power domain control")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20251106152448.453b53ad@canb.auug.org.au/
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20251121-device-power-doc-fix-v2-1-3417779f36c7@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
|
|
The selective fetch code doesn't handle asycn flips correctly.
There is a nonsense check for async flips in
intel_psr2_sel_fetch_config_valid() but that only gets called
for modesets/fastsets and thus does nothing for async flips.
Currently intel_async_flip_check_hw() is very unhappy as the
selective fetch code pulls in planes that are not even async
flips capable.
Reject async flips when selective fetch is enabled, until
someone fixes this properly (ie. disable selective fetch while
async flips are being issued).
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251105171015.22234-1-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
|
|
xe_guc_ct_init_noalloc() allocates the CT workqueue and other helpers
before it tries to initialize ct->lock. If drmm_mutex_init() fails
we currently bail out without releasing those resources because the
guc_ct_fini() hasn’t been registered yet.
Since destroy_workqueue() in guc_ct_fini() may flush the workqueue, which
in turn can take the ct lock, the initialization sequence is restructured
to first initialize the ct->lock, then set up all CT state, and finally
register guc_ct_fini().
v2: guc_ct_fini() does take ct lock. (Matt)
v3: move primelockdep() together with drmm_mutex_init(). (Lucas)
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251110184522.1581001-2-shuicheng.lin@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
When the pagefault handling code was moved to a new file, an extra
drm_exec_init() was added to the VMA path. This call is unnecessary because
xe_validation_ctx_init() already performs a drm_exec_init(), resulting in a
memory leak reported by kmemleak.
Remove the redundant drm_exec_init() from the VMA pagefault handling code.
Fixes: fb544b844508 ("drm/xe: Implement xe_pagefault_queue_work")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian Köni |
