| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Backmerging to be able do to a clean PR.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Add new debugfs entry "guc_log_lfd", prepared for output guc log
in LFD(Log Format Descriptors) format.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20251127170759.2620994-7-zhanjun.dong@intel.com
|
|
Add GuC crash dump data empty check. LFD will only include crash dump
section when data is not empty.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20251127170759.2620994-6-zhanjun.dong@intel.com
|
|
Add GuC log event buffer output in LFD format.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20251127170759.2620994-5-zhanjun.dong@intel.com
|
|
Add support to output GuC log init config (LIC) in LFD format.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20251127170759.2620994-4-zhanjun.dong@intel.com
|
|
Add GuC LFD (Log Format Descriptors) related ABI definitions.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20251127170759.2620994-3-zhanjun.dong@intel.com
|
|
Add GuC log init config (LIC) ABI definitions.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20251127170759.2620994-2-zhanjun.dong@intel.com
|
|
Whitelist OAM registers to enable userspace to execute MMIO triggers on OAM
units.
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20251202025115.373546-6-ashutosh.dixit@intel.com
|
|
Minor refactor of OAG MMIO trigger register whitelisting for code reuse
with OAM MMIO trigger register whitelisting.
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20251202025115.373546-5-ashutosh.dixit@intel.com
|
|
Exec_queue's are only used for OAR/OAC functionality for OAG unit. Make
this requirement explicit, which avoids complications in the code for
other (non-OAG) OA units.
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20251202025115.373546-4-ashutosh.dixit@intel.com
|
|
gt_id was previously omitted from 'struct drm_xe_oa_unit' because it could
be determine from hwe's attached to the OA unit. However, we now have OA
units which don't have any hwe's attached to them. Hence add gt_id to
'struct drm_xe_oa_unit' in order to provide this needed information to
userspace.
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20251202025115.373546-3-ashutosh.dixit@intel.com
|
|
Use explicit struct initialization for struct xe_oa_regs to reduce chance
of error. Also add .oa_mmio_trg field to struct for completeness.
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20251202025115.373546-2-ashutosh.dixit@intel.com
|
|
Expose color pipeline and add ability to program it.
v2: Set bit to enable multisegmented lut
v3: s/drm_color_lut_32/drm_color_lut32 (Simon)
v4: - Fix dsb programming
- Remove multi-segment LUT, they will be added in later patches
- Add pipeline only to TGL+
- Code Refactor
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-16-uma.shankar@intel.com
|
|
Add helpers to program the 3D LUT registers and arm them.
LUT_3D_READY in LUT_3D_CLT is cleared off by the HW once
the LUT buffer is loaded into it's internal working RAM.
So by the time we try to load/commit new values, we expect
it to be cleared off. If not, log an error and return
without writing new values. Do it only when writing with MMIO.
There is no way to read register within DSB execution.
v2:
- Add information regarding LUT_3D_READY to commit message (Jani)
- Log error instead of a drm_warn and return without committing changes
if 3DLUT HW is not ready to accept new values.
- Refactor intel_color_crtc_has_3dlut()
Also remove Gen10 check (Suraj)
v3:
- Addressed review comments (Suraj)
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-15-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add registers needed to program 3D LUT
v2:
- Follow convention documented in i915_reg.h (Jani)
- Removing space in trailer (Suraj)
- Move registers to intel_color_regs.h
BSpec: 69378, 69379, 69380
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-14-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Extract the LUT and program plane post csc registers.
v2: Add DSB support
v3: Add support for single segment 1D LUT
v4:
- s/drm_color_lut_32/drm_color_lut32 (Simon)
- Move declaration to beginning of the function (Suraj)
- Remove multisegmented code, add it later
- Remove dead code for SDR planes, add it later
v5:
- Fix iterator issues
v6: Removed redundant variable (Suraj)
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-13-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add callback to program Pre-CSC LUT for TGL and beyond
v2: Add DSB support
v3: Add support for single segment 1D LUT color op
v4:
- s/drm_color_lut_32/drm_color_lut32/ (Simon)
- Change commit message (Suraj)
- Improve comments (Suraj)
- Remove multisegmented programming, to be added later
- Remove dead code for SDR planes, add when needed
BSpec: 50411, 50412, 50413, 50414
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-12-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add framework that will help in loading LUT to Pre/Post CSC color
blocks.
v2: Add dsb support
v3: Align enum names
v4: Propagate change in lut data to crtc_state
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-11-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add macros to define Plane Post CSC registers
v2:
- Add Plane Post CSC Gamma Multi Segment Enable bit
- Add BSpec entries (Suraj)
v3:
- Fix checkpatch issues (Suraj)
BSpec: 50403, 50404, 50405, 50406, 50409, 50410,
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-10-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add macros to define Plane Degamma registers
v2:
- Add BSpec links (Suraj)
v3:
- Add Bspec links in trailer (Suraj)
- Fix checkpatch issues (Suraj)
BSpec: 50411, 50412, 50413, 50414
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-9-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add callback for setting CTM block in platforms D12 and beyond
v2:
- Add dsb support
- Pass plane_state as we are now doing a uapi to hw state copy
- Add support for 3x4 matrix
v3:
- Add relevant header file
- Fix typo (Suraj)
- Add callback to TGL+ (Suraj)
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-8-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
When int_bits == 0, we lose the sign bit when we do the range check
and apply the mask.
Fix this by ensuring a minimum of one integer bit, which guarantees space
for the sign bit in fully fractional representations (e.g. S0.12)
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-7-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add framework to program CSC. It enables copying of matrix from UAPI
to intel plane state. Also add helper functions which will eventually
program values to hardware.
Add a crtc state variable to track plane color change.
v2:
- Add crtc_state->plane_color_changed
- Improve comments (Suraj)
- s/intel_plane_*_color/intel_plane_color_* (Suraj)
v3:
- align parameters with open braces (Suraj)
- Improve commit message (Suraj)
v4:
- Re-arrange variable declaration (Suraj)
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-6-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add a color pipeline with three colorops in the sequence
1D LUT - 3x4 CTM - 1D LUT
This pipeline can be used to do any color space conversion or HDR
tone mapping
v2: Change namespace to drm_plane_colorop*
v3: Use simpler/pre-existing colorops for first iteration
v4:
- s/*_tf_*/*_color_* (Jani)
- Refactor to separate files (Jani)
- Add missing space in comment (Suraj)
- Consolidate patch that adds/attaches pipeline property
v5:
- Limit MAX_COLOR_PIPELINES to 2.(Suraj)
Increase it as and when we add more pipelines.
- Remove redundant initialization code (Suraj)
v6:
- Use drm_plane_create_color_pipeline_property() (Arun)
Now MAX_COLOR_PIPELINES is 1
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-5-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add intel colorop create helper
v2:
- Make function names consistent (Jani)
- Remove redundant code related to colorop state
- Refactor code to separate files
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-4-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add data structure to store intel specific details of colorop
v2:
- Remove dead code
- Convert macro to function (Jani)
- Remove colorop state as it is not being used
- Refactor to separate file
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-3-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add macros to identify intel specific color blocks. It will help
in mapping drm_color_ops to intel color HW blocks
v2:- Prefix enums with INTEL_* (Jani, Suraj)
- Remove unnecessary comments (Jani)
- Commit message improvements (Suraj)
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-2-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
A cleanup patch apparently by accident used a local device structure
instead of a pointer to one in the nt35560_read_id() function, causing
a warning about stack usage:
drivers/gpu/drm/panel/panel-novatek-nt35560.c: In function 'nt35560_read_id':
drivers/gpu/drm/panel/panel-novatek-nt35560.c:249:1: error: the frame size of 1296 bytes is larger than 1280 bytes [-Werror=frame-larger-than=]
Change this to a pointer as was liley intended here.
Fixes: 5fbc0dbb92d6 ("drm/panel: novatek-nt35560: Clean up driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20251204094550.1030506-1-arnd@kernel.org
|
|
Pull drm updates from Dave Airlie:
"There was a rather late merge of a new color pipeline feature, that
some userspace projects are blocked on, and has seen a lot of work in
amdgpu. This should have seen some time in -next. There is additional
support for this for Intel, that if it arrives in the next day or two
I'll pass it on in another pull request and you can decide if you want
to take it.
Highlights:
- Arm Ethos NPU accelerator driver
- new DRM color pipeline support
- amdgpu will now run discrete SI/CIK cards instead of radeon, which
enables vulkan support in userspace
- msm gets gen8 gpu support
- initial Xe3P support in xe
Full detail summary:
New driver:
- Arm Ethos-U65/U85 accel driver
Core:
- support the drm color pipeline in vkms/amdgfx
- add support for drm colorop pipeline
- add COLOR PIPELINE plane property
- add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE
- throttle dirty worker with vblank
- use drm_for_each_bridge_in_chain_scoped in drm's bridge code
- Ensure drm_client_modeset tests are enabled in UML
- add simulated vblank interrupt - use in drivers
- dumb buffer sizing helper
- move freeing of drm client memory to driver
- crtc sharpness strength property
- stop using system_wq in scheduler/drivers
- support emergency restore in drm-client
Rust:
- make slice::as_flattened usable on all supported rustc
- add FromBytes::from_bytes_prefix() method
- remove redundant device ptr from Rust GEM object
- Change how AlwaysRefCounted is implemented for GEM objects
gpuvm:
- Add deferred vm_bo cleanup to GPUVM (for rust)
atomic:
- cleanup and improve state handling interfaces
buddy:
- optimize block management
dma-buf:
- heaps: Create heap per CMA reserved location
- improve userspace documentation
dp:
- add POST_LT_ADJ_REQ training sequence
- DPCD dSC quirk for synaptics panamera devices
- helpers to query branch DSC max throughput
ttm:
- Rename ttm_bo_put to ttm_bo_fini
- allow page protection flags on risc-v
- rework pipelined eviction fence handling
amdgpu:
- enable amdgpu by default for SI/CI dGPUs
- enable DC by default on SI
- refactor CIK/SI enablement
- add ABM KMS property
- Re-enable DM idle optimizations
- DC Analog encoders support
- Powerplay fixes for fiji/iceland
- Enable DC on bonaire by default
- HMM cleanup
- Add new RAS framework
- DML2.1 updates
- YCbCr420 fixes
- DC FP fixes
- DMUB fixes
- LTTPR fixes
- DTBCLK fixes
- DMU cursor offload handling
- Userq validation improvements
- Unify shutdown callback handling
- Suspend improvements
- Power limit code cleanup
- SR-IOV fixes
- AUX backlight fixes
- DCN 3.5 fixes
- HDMI compliance fixes
- DCN 4.0.1 cursor updates
- DCN interrupt fix
- DC KMS full update improvements
- Add additional HDCP traces
- DCN 3.2 fixes
- DP MST fixes
- Add support for new SR-IOV mailbox interface
- UQ reset support
- HDP flush rework
- VCE1 support
amdkfd:
- HMM cleanups
- Relax checks on save area overallocations
- Fix GPU mappings after prefetch
radeon:
- refactor CIK/SI enablement
xe:
- Initial Xe3P support
- panic support on VRAM for display
- fix stolen size check
- Loosen used tracking restriction
- New SR-IOV debugfs structure and debugfs updates
- Hide the GPU madvise flag behind a VM_BIND flag
- Always expose VRAM provisioning data on discrete GPUs
- Allow VRAM mappings for userptr when used with SVM
- Allow pinning of p2p dma-buf
- Use per-tile debugfs where appropriate
- Add documentation for Execution Queues
- PF improvements
- VF migration recovery redesign work
- User / Kernel VRAM partitioning
- Update Tile-based messages
- Allow configfs to disable specific GT types
- VF provisioning and migration improvements
- use SVM range helpers in PT layer
- Initial CRI support
- access VF registers using dedicated MMIO view
- limit number of jobs per exec queue
- add sriov_admin sysfs tree
- more crescent island specific support
- debugfs residency counter
- SRIOV migration work
- runtime registers for GFX 35
i915:
- add initial Xe3p_LPD display version 35 support
- Enable LNL+ content adaptive sharpness filter
- Use optimized VRR guardband
- Enable Xe3p LT PHY
- enable FBC support for Xe3p_LPD display
- add display 30.02 firmware support
- refactor SKL+ watermark latency setup
- refactor fbdev handling
- call i915/xe runtime PM via function pointers
- refactor i915/xe stolen memory/display interfaces
- use display version instead of gfx version in display code
- extend i915_display_info with Type-C port details
- lots of display cleanups/refactorings
- set O_LARGEFILE in __create_shmem
- skuip guc communication warning on reset
- fix time conversions
- defeature DRRS on LNL+
- refactor intel_frontbuffer split between i915/xe/display
- convert inteL_rom interfaces to struct drm_device
- unify display register polling interfaces
- aovid lock inversion when pinning to GGTT on CHV/BXT+VTD
panel:
- Add KD116N3730A08/A12, chromebook mt8189
- JT101TM023, LQ079L1SX01,
- GLD070WX3-SL01 MIPI DSI
- Samsung LTL106AL0, Samsung LTL106AL01
- Raystar RFF500F-AWH-DNN
- Winstar WF70A8SYJHLNGA
- Wanchanglong w552946aaa
- Samsung SOFEF00
- Lenovo X13s panel
- ilitek-ili9881c - add rpi 5" support
- visionx-rm69299 - add backlight support
- edp - support AUI B116XAN02.0
bridge:
- improve ref counting
- ti-sn65dsi86 - add support for DP mode with HPD
- synopsis: support CEC, init timer with correct freq
- ASL CS5263 DP-to-HDMI bridge support
nova-core:
- introduce bitfield! macro
- introduce safe integer converters
- GSP inits to fully booted state on Ampere
- Use more future-proof register for GPU identification
nova-drm:
- select NOVA_CORE
- 64-bit only
nouveau:
- improve reclocking on tegra 186+
- add large page and compression support
msm:
- GPU:
- Gen8 support: A840 (Kaanapali) and X2-85 (Glymur)
- A612 support
- MDSS:
- Added support for Glymur and QCS8300 platforms
- DPU:
- Enabled Quad-Pipe support, unlocking higher resolutions support
- Added support for Glymur platform
- Documented DPU on QCS8300 platform as supported
- DisplayPort:
- Added support for Glymur platform
- Added support lame remapping inside DP block
- Documented DisplayPort controller on QCS8300 and SM6150/QCS615
as supported
tegra:
- NVJPG driver
panfrost:
- display JM contexts over debugfs
- export JM contexts to userspace
- improve error and job handling
panthor:
- support custom ASN_HASH for mt8196
- support mali-G1 GPU
- flush shmem write before mapping buffers uncached
- make timeout per-queue instead of per-job
mediatek:
- MT8195/88 HDMIv2/DDCv2 support
rockchip:
- dsi: add support for RK3368
amdxdna:
- enhance runtime PM
- last hardware error reading uapi
- support firmware debug output
- add resource and telemetry data uapi
- preemption support
imx:
- add driver for HDMI TX Parallel audio interface
ivpu:
- add support for user-managed preemption buffer
- add userptr support
- update JSM firware API to 3.33.0
- add better alloc/free warnings
- fix page fault in unbind all bos
- rework bind/unbind of imported buffers
- enable MCA ECC signalling
- split fw runtime and global memory buffers
- add fdinfo memory statistics
tidss:
- convert to drm logging
- logging cleanup
ast:
- refactor generation init paths
- add per chip generation detect_tx_chip
- set quirks for each chip model
atmel-hlcdc:
- set LCDC_ATTRE register in plane disable
- set correct values for plane scaler
solomon:
- use drm helper for get_modes and move_valid
sitronix:
- fix output position when clearing screens
qaic:
- support dma-buf exports
- support new firmware's READ_DATA implementation
- sahara AIC200 image table update
- add sysfs support
- add coredump support
- add uevents support
- PM support
sun4i:
- layer refactors to decouple plane from output
- improve DE33 support
vc4:
- switch to generic CEC helpers
komeda:
- use drm_ logging functions
vkms:
- configfs support for display configuration
vgem:
- fix fence timer deadlock
etnaviv:
- add HWDB entry for GC8000 Nano Ultra VIP r6205"
* tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel: (1869 commits)
Revert "drm/amd: Skip power ungate during suspend for VPE"
drm/amdgpu: use common defines for HUB faults
drm/amdgpu/gmc12: add amdgpu_vm_handle_fault() handling
drm/amdgpu/gmc11: add amdgpu_vm_handle_fault() handling
drm/amdgpu: use static ids for ACP platform devs
drm/amdgpu/sdma6: Update SDMA 6.0.3 FW version to include UMQ protected-fence fix
drm/amdgpu: Forward VMID reservation errors
drm/amdgpu/gmc8: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc7: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Cache VM fault info
drm/amdgpu/gmc6: Don't print MC client as it's unknown
drm/amdgpu/cz_ih: Enable soft IRQ handler ring
drm/amdgpu/tonga_ih: Enable soft IRQ handler ring
drm/amdgpu/iceland_ih: Enable soft IRQ handler ring
drm/amdgpu/cik_ih: Enable soft IRQ handler ring
drm/amdgpu/si_ih: Enable soft IRQ handler ring
drm/amd/display: fix typo in display_mode_core_structs.h
drm/amd/display: fix Smart Power OLED not working after S4
drm/amd/display: Move RGB-type check for audio sync to DCE HW sequence
...
|
|
The Makefile logic for building xe_sriov_vfio.o was added incorrectly,
as setting CONFIG_XE_VFIO_PCI=m means it doesn't get included into a
built-in xe driver:
ERROR: modpost: "xe_sriov_vfio_stop_copy_enter" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_stop_copy_exit" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_suspend_device" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_wait_flr_done" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_error" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_resume_data_enter" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_resume_device" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_resume_data_exit" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_data_write" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_migration_supported" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
WARNING: modpost: suppressed 3 unresolved symbol warnings because there were too many)
Check for CONFIG_XE_VFIO_PCI being enabled in the Makefile to decide whether to
include the object instead.
Fixes: bd45d46ffc8f ("drm/xe/pf: Export helpers for VFIO")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20251204094154.1029357-1-arnd@kernel.org
(cherry picked from commit ef7de33544a7a6783d7afe09496da362d1e90ba1)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
The Xe driver fails to build when CONFIG_DRM_XE_GPUSVM is disabled
but CONFIG_DRM_GPUSVM is turned on, due to the clash of two commits:
In file included from drivers/gpu/drm/xe/xe_vm_madvise.c:8:
drivers/gpu/drm/xe/xe_svm.h: In function 'xe_svm_init':
include/linux/stddef.h:8:14: error: passing argument 5 of 'drm_gpusvm_init' makes integer from pointer without a cast [-Wint-conversion]
drivers/gpu/drm/xe/xe_svm.h:217:38: note: in expansion of macro 'NULL'
217 | NULL, NULL, 0, 0, 0, NULL, NULL, 0);
| ^~~~
In file included from drivers/gpu/drm/xe/xe_bo_types.h:11,
from drivers/gpu/drm/xe/xe_bo.h:11,
from drivers/gpu/drm/xe/xe_vm_madvise.c:11:
include/drm/drm_gpusvm.h:254:35: note: expected 'long unsigned int' but argument is of type 'void *'
254 | unsigned long mm_start, unsigned long mm_range,
| ~~~~~~~~~~~~~~^~~~~~~~
In file included from drivers/gpu/drm/xe/xe_vm_madvise.c:14:
drivers/gpu/drm/xe/xe_svm.h:216:16: error: too many arguments to function 'drm_gpusvm_init'; expected 10, have 11
216 | return drm_gpusvm_init(&vm->svm.gpusvm, "Xe SVM (simple)", &vm->xe->drm,
| ^~~~~~~~~~~~~~~
217 | NULL, NULL, 0, 0, 0, NULL, NULL, 0);
| ~
include/drm/drm_gpusvm.h:251:5: note: declared here
Adapt the caller to the new argument list by removing the extraneous
NULL argument.
Fixes: 9e9787414882 ("drm/xe/userptr: replace xe_hmm with gpusvm")
Fixes: 10aa5c806030 ("drm/gpusvm, drm/xe: Fix userptr to not allow device private pages")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20251204094704.1030933-1-arnd@kernel.org
|
|
The Makefile logic for building xe_sriov_vfio.o was added incorrectly,
as setting CONFIG_XE_VFIO_PCI=m means it doesn't get included into a
built-in xe driver:
ERROR: modpost: "xe_sriov_vfio_stop_copy_enter" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_stop_copy_exit" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_suspend_device" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_wait_flr_done" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_error" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_resume_data_enter" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_resume_device" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_resume_data_exit" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_data_write" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_migration_supported" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
WARNING: modpost: suppressed 3 unresolved symbol warnings because there were too many)
Check for CONFIG_XE_VFIO_PCI being enabled in the Makefile to decide whether to
include the object instead.
Fixes: 17f22465c5a5 ("drm/xe/pf: Export helpers for VFIO")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20251204094154.1029357-1-arnd@kernel.org
|
|
The return code of dma_fence_signal() is not useful and shall be removed
from the kernel. To do so, the few users who rely on the return code
must be ported.
Use dma_fence_check_and_signal() and mapp its boolean return code to
dma_fence_signal()'s former value for already-signaled fences.
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20251201105011.19386-8-phasta@kernel.org
|
|
Xe is one of the few users utilizing the return code of
dma_fence_signal() to check whether a fence had already been signaled by
someone else.
To clean up and simplify the dma_fence API, the few kernel users relying
on that behavior shall be ported to an alternative function.
Replace dma_fence_signal_locked() with
dma_fence_check_and_signal_locked().
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20251201105011.19386-6-phasta@kernel.org
|
|
amdkfd is one of the few users which relies on the return code of
dma_fence_signal(), which, so far, informs the caller whether the fence
had already been signaled.
As there are barely any users, dma_fence signaling functions shall get
the return value void. To do so, the few users must be ported to a
function which preserves the old behavior.
Replace the call to dma_fence_signal() with one to
dma_fence_check_and_signal().
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20251201105011.19386-5-phasta@kernel.org
|
|
Since commit 94fe479fae96 ("drm/rcar-du: dsi: Clean up handling of DRM mode flags")
the driver does not set TXVMVPRMSET0R_VSPOL_LOW and TXVMVPRMSET0R_HSPOL_LOW
for modes which set neither DRM_MODE_FLAG_[PN].SYNC. The previous behavior
was to assume that neither flag means DRM_MODE_FLAG_N.SYNC . Restore the
previous behavior for maximum compatibility.
The change of behavior is visible below, consider Vertical mode->flags
for simplicity sake, although the same applies to Horizontal ones:
Before 94fe479fae96 ("drm/rcar-du: dsi: Clean up handling of DRM mode flags") :
- DRM_MODE_FLAG_PVSYNC => vprmset0r |= 0
- DRM_MODE_FLAG_NVSYNC => vprmset0r |= TXVMVPRMSET0R_VSPOL_LOW
- Neither DRM_MODE_FLAG_[PN]VSYNC => vprmset0r |= TXVMVPRMSET0R_VSPOL_LOW
After 94fe479fae96 ("drm/rcar-du: dsi: Clean up handling of DRM mode flags") :
- DRM_MODE_FLAG_PVSYNC => vprmset0r |= 0
- DRM_MODE_FLAG_NVSYNC => vprmset0r |= TXVMVPRMSET0R_VSPOL_LOW
- Neither DRM_MODE_FLAG_[PN]VSYNC => vprmset0r |= 0 <---------- This broke
The "Neither" case behavior is different, because DRM_MODE_FLAG_N[HV]SYNC is
really not equivalent !DRM_MODE_FLAG_P[HV]SYNC .
Fixes: 94fe479fae96 ("drm/rcar-du: dsi: Clean up handling of DRM mode flags")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20251202181146.138365-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
Disable cache read setting in the cacheability configuration
register as per the wa recommendation
Bspec: 79482, 74722, 68881
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patch.msgid.link/20251127115349.249120-4-vinod.govindapillai@intel.com
|
|
One of the FBC instances can utilize the reserved area of SoC
level cache for the fbc transactions to benefit reduced memory
system power especially in idle scenarios. Reserved area of the
system cache can be assigned to an fbc instance by configuring
the cacheability configuration register with offset of the
compressed frame buffer in stolen memoty of that fbc. There is
a limit to this reserved area which is programmable and for
xe3p_lpd the limit is defined as 2MB. The first FBC instance
enabled will utilize the system cache as of now.
v2: - better to track fbc sys cache usage from intel_display level,
sanitize the cacheability config register on probe (Matt)
- limit this for integrated graphics solutions, confirmed that
no default value set for cache range by hw (Gustavo)
v3: - changes related to the use of fbc substruct in intel_display
- use intel_de_write() instead of intel_rmw() by hardcoding the
default value fields
v4: - protect sys cache config accesses, sys cache usage status in
debugfs per fbc instance (Jani)
v5: - mutex_init and missing mutex_lock in sanitize call
v6: - changes to commit message and some obvious comments removed
Bspec: 68881, 74722
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patch.msgid.link/20251128113557.129192-1-vinod.govindapillai@intel.com
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
|
|
Introduce DRM_XE_GEM_CREATE_FLAG_NO_COMPRESSION to let userspace
opt out of CCS compression on a per-BO basis. When set, the driver
maps this to XE_BO_FLAG_NO_COMPRESSION, skips CCS metadata
allocation/clearing, and rejects compressed PAT indices at vm_bind.
This avoids extra memory ops and manual CCS state handling for buffers.
To allow userspace to detect at runtime whether the kernel supports this
feature, add DRM_XE_QUERY_CONFIG_FLAG_HAS_NO_COMPRESSION_HINT and expose
it via query_config() on Xe2+ platforms.
Mesa PR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38425
IGT PR: https://patchwork.freedesktop.org/patch/685180/
v2
- Changed error code from -EINVAL to -EOPNOTSUPP for unsupported flag
usage on pre-Xe2 platforms
- Fixed checkpatch warning in xe_vm.c
- Fixed kernel-doc formatting in xe_drm.h
v3
- Rebase
- Updated commit title and description
- Added UAPI for DRM_XE_QUERY_CONFIG_FLAG_HAS_NO_COMPRESSION_HINT and
exposed it via query_config()
v4
- Rebase
v5
- Included Mesa PR and IGT PR in the commit description
- Used xe_pat_index_get_comp_en() to extract the compression
v6
- Added XE_IOCTL_DBG() checks for argument validation
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Suggested-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20251204040402.2692921-2-sanjay.kumar.yadav@intel.com
|
|
As FBC can utilize the system cache in xe3p_lpd onwards, we need
a provision to track which fbc instance is utilizing this cache.
A sub-struct at intel_display level to group all the fbc ops will
make fbc handling much easier. Introduce a fbc sub-struct and move
the fbc instance array into that.
v2: changes in commit message
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20251127115349.249120-2-vinod.govindapillai@intel.com
|
|
As per the updated WA database, Wa_18041344222 no longer applies to
graphics IP version 30.01. Remove it.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/280ab3e8dce8d7a40540ae634a5432694ac17ab0.1763762330.git.harish.chegondi@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild updates from Nicolas Schier:
- Enable -fms-extensions, allowing anonymous use of tagged struct or
union in struct/union (tag kbuild-ms-extensions-6.19). An exemplary
conversion patch is added here, too (btrfs).
[ Editor's note: the core of this actually came in early through a
shared branch and a few other trees - Linus ]
- Introduce architecture-specific CC_CAN_LINK and flags for userprogs
- Add new packaging target 'modules-cpio-pkg' for building a initramfs
cpio w/ kmods
- Handle included .c files in gen_compile_commands
- Minor kbuild changes:
- Use objtree for module signing key path, fixing oot kmod signing
- Improve documentation of KBUILD_BUILD_TIMESTAMP
- Reuse KBUILD_USERCFLAGS for UAPI, instead of defining twice
- Rename scripts/Makefile.extrawarn to Makefile.warn
- Drop obsolete types.h check from headers_check.pl
- Remove outdated config leak ignore entries
* tag 'kbuild-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: add target to build a cpio containing modules
initramfs: add gen_init_cpio to hostprogs unconditionally
kbuild: allow architectures to override CC_CAN_LINK
init: deduplicate cc-can-link.sh invocations
kbuild: don't enable CC_CAN_LINK if the dummy program generates warnings
scripts: headers_install.sh: Remove two outdated config leak ignore entries
scripts/clang-tools: Handle included .c files in gen_compile_commands
kbuild: uapi: Drop types.h check from headers_check.pl
kbuild: Rename Makefile.extrawarn to Makefile.warn
MAINTAINERS, .mailmap: Update mail address for Nicolas Schier
kbuild: uapi: reuse KBUILD_USERCFLAGS
kbuild: doc: improve KBUILD_BUILD_TIMESTAMP documentation
kbuild: Use objtree for module signing key path
btrfs: send: make use of -fms-extensions for defining struct fs_path
|
|
Do not reference the loop variable job after the loop has exited.
Instead, save the job from the last iteration of the loop.
Fixes: 00937fe1921a ("drm/xe/vf: Start re-emission from first unsignaled job during VF migration")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202511291102.jnnKP6IB-lkp@intel.com/
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patch.msgid.link/20251203011809.968893-1-matthew.brost@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Allow creaing nbcon console drivers with an unsafe write_atomic()
callback that can only be called by the final nbcon_atomic_flush_unsafe().
Otherwise, the driver would rely on the kthread.
It is going to be used as the-best-effort approach for an
experimental nbcon netconsole driver, see
https://lore.kernel.org/r/20251121-nbcon-v1-2-503d17b2b4af@debian.org
Note that a safe .write_atomic() callback is supposed to work in NMI
context. But some networking drivers are not safe even in IRQ
context:
https://lore.kernel.org/r/oc46gdpmmlly5o44obvmoatfqo5bhpgv7pabpvb6sjuqioymcg@gjsma3ghoz35
In an ideal world, all networking drivers would be fixed first and
the atomic flush would be blocked only in NMI context. But it brings
the question how reliable networking drivers are when the system is
in a bad state. They might block flushing more reliable serial
consoles which are more suitable for serious debugging anyw |
