| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
kvm_gmem_populate(), and the associated post-populate callbacks, have
some limited support for dealing with guests backed by hugepages by
passing the order information along to each post-populate callback and
iterating through the pages passed to kvm_gmem_populate() in
hugepage-chunks.
However, guest_memfd doesn't yet support hugepages, and in most cases
additional changes in the kvm_gmem_populate() path would also be needed
to actually allow for this functionality.
This makes the existing code unnecessarily complex, and makes changes
difficult to work through upstream due to theoretical impacts on
hugepage support that can't be considered properly without an actual
hugepage implementation to reference. So for now, remove what's there
so changes for things like in-place conversion can be
implemented/reviewed more efficiently.
Suggested-by: Vishal Annapurve <vannapurve@google.com>
Co-developed-by: Vishal Annapurve <vannapurve@google.com>
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Tested-by: Vishal Annapurve <vannapurve@google.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://patch.msgid.link/20260108214622.1084057-3-michael.roth@amd.com
[sean: check for !IS_ERR() before checking folio_order()]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add UART13, typically used for Bluetooth connection on SM8150.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260106-wcn3990-pwrctl-v2-9-0386204328be@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Specify power supply for the second chain / antenna output of the
onboard WiFi chip.
Fixes: 3f72e2d3e682 ("arm64: dts: qcom: Add Dragonboard 845c")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260106-wcn3990-pwrctl-v2-8-0386204328be@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On SDM845 SPI uses hardware-provided chip select, while specifying
cs-gpio makes the driver request GPIO pin, which on DB845c conflicts
with the normal host controllers pinctrl entry.
Drop the cs-gpios property to restore SPI functionality.
Fixes: cb29e7106d4e ("arm64: dts: qcom: db845c: Add support for MCP2517FD")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260106-wcn3990-pwrctl-v2-7-0386204328be@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Follow commit 9c92d36b0b1e ("arm64: dts: qcom: qrb2210-rb1: Fix UART3
wakeup IRQ storm") and apply the similar fix to the RB2 platform.
Having RX / TX pins as pull up and wakup interrupt as high-level
triggered generates an interrupt storm when trying to suspend the
device. Avoid the storm by using the falling edge trigger (as all other
platforms do).
Fixes: cab60b166575 ("arm64: dts: qcom: qrb4210-rb2: Enable bluetooth")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260106-wcn3990-pwrctl-v2-6-0386204328be@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
- kerneldoc fixes from Bagas Sanjaya
- DAMON fixes from SeongJae
- mremap VMA-related fixes from Lorenzo
- various singletons - please see the changelogs for details
* tag 'mm-hotfixes-stable-2026-01-15-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (30 commits)
drivers/dax: add some missing kerneldoc comment fields for struct dev_dax
mm: numa,memblock: include <asm/numa.h> for 'numa_nodes_parsed'
mailmap: add entry for Daniel Thompson
tools/testing/selftests: fix gup_longterm for unknown fs
mm/page_alloc: prevent pcp corruption with SMP=n
iommu/sva: include mmu_notifier.h header
mm: kmsan: fix poisoning of high-order non-compound pages
tools/testing/selftests: add forked (un)/faulted VMA merge tests
mm/vma: enforce VMA fork limit on unfaulted,faulted mremap merge too
tools/testing/selftests: add tests for !tgt, src mremap() merges
mm/vma: fix anon_vma UAF on mremap() faulted, unfaulted merge
mm/zswap: fix error pointer free in zswap_cpu_comp_prepare()
mm/damon/sysfs-scheme: cleanup access_pattern subdirs on scheme dir setup failure
mm/damon/sysfs-scheme: cleanup quotas subdirs on scheme dir setup failure
mm/damon/sysfs: cleanup attrs subdirs on context dir setup failure
mm/damon/sysfs: cleanup intervals subdirs on attrs dir setup failure
mm/damon/core: remove call_control in inactive contexts
powerpc/watchdog: add support for hardlockup_sys_info sysctl
mips: fix HIGHMEM initialization
mm/hugetlb: ignore hugepage kernel args if hugepages are unsupported
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
In terms of bigger fixes, RK3576 GPU register range was overflowing into
the next peripheral, Nano Pi M5 sound was not working correctly, the
adc-keys voltage levels for 2 buttons on the Pinephone Pro were wrong
and a really wrong PCIe linkspeed was removed from helios64.
Apart from that there are a number of dt-cleanlieness fixes.
* tag 'v6.19-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Drop unsupported properties
arm64: dts: rockchip: Fix gpio pinctrl node names
arm64: dts: rockchip: Fix pinctrl property typo on rk3326-odroid-go3
arm64: dts: rockchip: Drop "sitronix,st7789v" fallback compatible from rk3568-wolfvision
arm64: dts: rockchip: Fix wrong register range of rk3576 gpu
arm64: dts: rockchip: Configure MCLK for analog sound on NanoPi M5
arm64: dts: rockchip: Fix headphones widget name on NanoPi M5
arm64: dts: rockchip: remove redundant max-link-speed from nanopi-r4s
arm64: dts: rockchip: remove dangerous max-link-speed from helios64
arm64: dts: rockchip: fix unit-address for RK3588 NPU's core1 and core2's IOMMU
arm64: dts: rockchip: Fix wifi interrupts flag on Sakura Pi RK3308B
arm64: dts: rockchip: Fix voltage threshold for volume keys for Pinephone Pro
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes
Microchip AT91 fixes for v6.19
This update includes:
- fix access to the PHYs on the Microchip LAN966X PCB8290 board
- fix the ranges DT property for flexcom9 on the Microchip SAMA7D65 SoC
- fix the #size-cells DT property for i2c3 on the Microchip SAMA7D65 SoC
* tag 'at91-fixes-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sama7d65: fix size-cells property for i2c3
ARM: dts: microchip: sama7d65: fix the ranges property for flx9
ARM: dts: microchip: lan966x: Fix the access to the PHYs for pcb8290
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Commit 59a42707a094 ("arm64: tegra: Add interconnect properties for
Tegra210") populated interconnect properties for Tegra210 and this is
preventing the Tegra DRM driver from probing successfully. The following
error is observed on boot ...
drm drm: failed to initialize 54240000.dc: -517
For now revert this change, until a fix is available.
Fixes: 59a42707a094 ("arm64: tegra: Add interconnect properties for Tegra210")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
For protected VMs, the guest's timer offset state should not be
controlled by the host and must always run with a virtual counter offset
of 0. The existing timer logic allowed the host to set and manage the
timer counter offsets for protected VMs in certain cases.
Disable all host-side management of timer offsets for protected VMs by
adding checks in the relevant code paths.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20251211104710.151771-10-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Certain VM IOCTLs are tied to specific VM features. Since pKVM does not
support all features, restrict which IOCTLs are allowed depending on
whether the associated feature is supported.
Use the existing VM capability check as the source of truth to whether
an IOCTL is allowed for a particular VM by mapping the IOCTLs with their
associated capabilities.
Suggested-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20251211104710.151771-9-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Track KVM IOCTLs (VM IOCTLs for now), and the associated KVM capability
that enables that IOCTL. Add a function that performs the lookup.
This will be used by CoCo VM Hypervisors (e.g., pKVM) to determine
whether a particular KVM IOCTL is allowed for its VMs.
Suggested-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
[maz: don't expose KVM_CAP_BASIC to userspace, and rely on NR_VCPUS
as a proxy for this]
Link: https://patch.msgid.link/20251211104710.151771-8-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Supporting MTE in pKVM introduces significant complexity to the
hypervisor at EL2, even for non-protected VMs, since it would require
EL2 to handle tag management.
For now, do not allow KVM_CAP_ARM_MTE for any VM type in protected mode.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20251211104710.151771-7-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Certain features and capabilities are restricted in protected mode. Most
of these features are restricted only for protected VMs, but some
are restricted for ALL VMs in protected mode.
Extend the pKVM capability check to pass the VM (kvm), and use that when
determining supported features.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20251211104710.151771-6-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
This 12-bit FAR fault IPA offset mask is hard-coded as 'GENMASK(11, 0)'
in several places to reconstruct the full fault IPA.
Introduce FAR_TO_FIPA_OFFSET() to calculate this value in a shared
header and replace all open-coded instances to improve readability.
No functional change intended.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20251211104710.151771-5-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The function pkvm_init_features_from_host() initializes guest
features, propagating them from the host. The logic to propagate
KVM_ARCH_FLAG_MTE_ENABLED (Memory Tagging Extension)
has a couple of issues.
First, the check was in the common path, before the divergence for
protected and non-protected VMs. For non-protected VMs, this was
unnecessary, as 'kvm->arch.flags' is completely overwritten by
host_arch_flags immediately after, which already contains the MTE flag.
For protected VMs, this was setting the flag even if the feature is not
allowed.
Second, the check was reading 'host_kvm->arch.flags' instead of using
the local 'host_arch_flags', which is read once from the host flags.
Fix these by moving the MTE flag check inside the protected-VM-only
path, checking if the feature is allowed, and changing it to use the
correct host_arch_flags local variable. This ensures non-protected VMs
get the flag via the bulk copy, and protected VMs get it via an explicit
check.
Fixes: b7f345fbc32a ("KVM: arm64: Fix FEAT_MTE in pKVM")
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20251211104710.151771-4-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The E2TB bits in MDCR_EL2 control trapping of Trace Buffer system
register accesses. These accesses are trapped to EL2 when the bits are
clear.
The trap initialization logic for protected VMs in pvm_init_traps_mdcr()
had the polarity inverted. When a guest did not support the Trace Buffer
feature, the code was setting E2TB. This incorrectly disabled the trap,
potentially allowing a protected guest to access registers for a feature
it was not given.
Fix this by inverting the operation.
Fixes: f50758260bff ("KVM: arm64: Group setting traps for protected VMs by control register")
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20251211104710.151771-3-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
For protected VMs in pKVM, the hypervisor should trap accesses to trace
buffer system registers if Trace Buffer isn't supported by the VM.
However, the current code only traps if Trace Buffer External Mode isn't
supported.
Fix this by checking for FEAT_TRBE (Trace Buffer) rather than
FEAT_TRBE_EXT.
Fixes: 9d5261269098 ("KVM: arm64: Trap external trace for protected VMs")
Reported-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20251211104710.151771-2-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The PCIe and USB TPHYs are under the soc bus, which provides MMIO,
and all nodes under that must use the bus, otherwise those would
clearly be out of place.
Add ranges to both the tphy(s) and assign the address to the main
node to silence a dtbs_check warning, and fix the children to
use the MMIO range of t-phy.
Fixes: ("f693e6ba55ae arm64: dts: mediatek: mt7988: Add t-phy for ssusb1")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The Khadas VIM1S uses the Amlogic S905Y4 SoC, based on the
Amlogic S4 SoC family, on a board with the same form factor as the
VIM/VIM2/VIM3/VIM4 models. Serial debug console, ethernet, SD card
work with this initial device tree.
It features:
- 2GB LPDDR4 RAM
- 16GB eMMC 5.1 storage
- 32MB SPI flash
- 100M Ethernet
- AP6256 Wireless (802.11 a/b/g/n/ac, BT5.0)
- HDMI 2.1 video
- 2x USB 2.0 ports
- 1x USB-C (power) with USB 2.0 OTG
- 2x LED's (1x red, 1x white)
- 3x buttons (power, function, reset)
- IR receiver
- 40pin GPIO Header
- 1x micro SD card slot
Signed-off-by: Nick Xie <nick@khadas.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260115030015.1334517-4-nick@khadas.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Update the compatible string for the Amlogic AQ222 board to include
the specific SoC compatible "amlogic,s805x2".
This aligns the device tree with the updated bindings which now
differentiate between S4 family members (S805X2 vs S905Y4).
Signed-off-by: Nick Xie <nick@khadas.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260115030015.1334517-3-nick@khadas.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
With FEAT_IDST, unimplemented system registers in the feature ID space
must be reported using EC=0x18 at the closest handling EL, rather than
with an UNDEF.
Most of these system registers are always implemented thanks to their
dependency on FEAT_AA64, except for a set of (currently) three registers:
GMID_EL1 (depending on MTE2), CCSIDR2_EL1 (depending on FEAT_CCIDX),
and SMIDR_EL1 (depending on SME).
For these three registers, report their trap as EC=0x18 if they
end-up trapping into KVM and that FEAT_IDST is implemented in the guest.
Otherwise, just make them UNDEF.
Link: https://patch.msgid.link/20260108173233.2911955-9-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Similarly to the "classic" KVM code, pKVM doesn't have an "anything
goes" synchronous exception injection primitive.
Carve one out of the UNDEF injection code.
Link: https://patch.msgid.link/20260108173233.2911955-8-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
If our host has MTE, but the guest doesn't, make sure we set HCR_EL2.TID5
to force GMID_EL1 being trapped. Such trap will be handled by the
FEAT_IDST handling.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Yuan Yao <yaoyuan@linux.alibaba.com>
Link: https://patch.msgid.link/20260108173233.2911955-7-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Now that we can handle ID registers using the FEAT_IDST infrastrcuture,
get rid of the handling of CSSIDR2_EL1 and SMIDR_EL1.
Reviewed-by: Yuan Yao <yaoyuan@linux.alibaba.com>
Link: https://patch.msgid.link/20260108173233.2911955-6-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add a bit of infrastrtcture to triage_sysreg_trap() to handle the
case of registers falling into the Feature ID space that do not
have a local handler.
For these, we can directly apply the FEAT_IDST semantics and inject
an EC=0x18 exception. Otherwise, an UNDEF will do.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Yuan Yao <yaoyuan@linux.alibaba.com>
Link: https://patch.msgid.link/20260108173233.2911955-5-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Maybe in a surprising way, we don't currently have a generic way
to inject a synchronous exception at the EL the vcpu is currently
running at.
Extract such primitive from the UNDEF injection code.
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Yuan Yao <yaoyuan@linux.alibaba.com>
Link: https://patch.msgid.link/20260108173233.2911955-4-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
HCR_EL2.TID5 is currently ignored by the trap routing infrastructure.
Wire it in the routing table so that GMID_EL1, the sole register
trapped by this bit, is correctly handled in the NV case.
Link: https://patch.msgid.link/20260108173233.2911955-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
ID_AA64MMFR2_EL1.IDS, as described in the sysreg file, is pretty horrible
as it diesctly give the ESR value. Repaint it using the usual NI/IMP
identifiers to describe the absence/presence of FEAT_IDST.
Also add the new EL3 routing feature, even if we really don't care about it.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://patch.msgid.link/20260108173233.2911955-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
This board at the moment has no support for PMIC regulators, but
the CCI requires a vproc regulator in order to both stop giving
dtbs_check warnings and to actually probe.
Since vproc is a system-critical regulator and the bootloader
enables it at max voltage, model it (at least temporarily) as
a regulator-fixed and assign it to CCI.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
In the RZ/N1 SoC, the GPIO interrupts are multiplexed using the GPIO
Interrupt Multiplexer.
Add the multiplexer node and connect GPIO interrupt lines to the
multiplexer.
The interrupt-map available in the multiplexer node has to be updated in
dts files depending on the GPIO usage. Indeed, the usage of an interrupt
for a GPIO is board dependent.
Up to 8 GPIOs can be used as an interrupt line (one per multiplexer
output interrupt).
Signed-off-by: Herve Codina (Schneider Electric) <herve.codina@bootlin.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20260114093938.1089936-9-herve.codina@bootlin.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add GPIO controllers (Synopsys DesignWare IPs) available in the
r9a06g032 (RZ/N1D) SoC.
Signed-off-by: Herve Codina (Schneider Electric) <herve.codina@bootlin.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20260114093938.1089936-6-herve.codina@bootlin.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Enable I3C on RZ/G3E SMARC SoM.
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/9d1cf2cdb1c11f24378404142e4c8aff680c6961.1763638659.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Now that we potentially have two bits to deal with when setting
execution permissions, make sure we correctly handle them when both
when building the page tables and when reading back from them.
Reported-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20251210173024.561160-7-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Describe all the VTCR_EL2 fields and their respective configurations,
making sure that we correctly ignore the bits that are not defined
for a given guest configuration.
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20251210173024.561160-6-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
None of the registers we manage in the feature dependency infrastructure
so far has any RES1 bit. This is about to change, as VTCR_EL2 has
its bit 31 being RES1.
In order to not fail the consistency checks by not describing a bit,
add RES1 bits to the set of immutable bits. This requires some extra
surgery for the FGT handling, as we now need to track RES1 bits there
as well.
There are no RES1 FGT bits *yet*. Watch this space.
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20251210173024.561160-5-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Our definition of VTCR_EL2 is both partial (tons of fields are
missing) and totally inconsistent (some constants are shifted,
some are not). They are also expressed in terms of TCR, which is
rather inconvenient.
Replace the ad-hoc definitions with the the generated version.
This results in a bunch of additional changes to make the code
with the unshifted nature of generated enumerations.
The register data was extracted from the BSD licenced AARCHMRS
(AARCHMRS_OPENSOURCE_A_profile_FAT-2025-09_ASL0).
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20251210173024.561160-4-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
ID_AA64MMFR0_EL1.TGRAN{4,16,64}_2 are currently represented as unordered
enumerations. However, the architecture treats them as Unsigned,
as hinted to by the MRS data:
(FEAT_S2TGran4K <=> (((UInt(ID_AA64MMFR0_EL1.TGran4_2) == 0) &&
FEAT_TGran4K) ||
(UInt(ID_AA64MMFR0_EL1.TGran4_2) >= 2))))
and similar descriptions exist for 16 and 64k.
This is also confirmed by D24.1.3.3 ("Alternative ID scheme used for
ID_AA64MMFR0_EL1 stage 2 granule sizes") in the L.b revision of
the ARM ARM.
Turn these fields into UnsignedEnum so that we can use the above
description more or less literally.
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20251210173024.561160-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
KVM/arm64 fixes for 6.19
- Ensure early return semantics are preserved for pKVM fault handlers
- Fix case where the kernel runs with the guest's PAN value when
CONFIG_ARM64_PAN is not set
- Make stage-1 walks to set the access flag respect the access
permission of the underlying stage-2, when enabled
- Propagate computed FGT values to the pKVM view of the vCPU at
vcpu_load()
- Correctly program PXN and UXN privilege bits for hVHE's stage-1 page
tables
- Check that the VM is actually using VGICv3 before accessing the GICv3
CPU interface
- Delete some unused code
# -----BEGIN PGP SIGNATURE-----
#
# iI0EABYKADUWIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCaWiyJBccb2xpdmVyLnVw
# dG9uQGxpbnV4LmRldgAKCRCivnWIJHzdFqVhAQDM4Lbrq0F80X+YzvO7oxWioOy4
# JiTATSii9Lit8KY6fgEAvLD4qaggLdF3+WY+V37YmTj3UDgI31ClBr+xSvSengA=
# =XaL0
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 15 Jan 2026 09:23:48 GMT
# gpg: using EDDSA key 8D5C78D65EECCC66EB6B28D2A2BE7588247CDD16
# gpg: issuer "oliver.upton@linux.dev"
# gpg: Can't check signature: No public key
* tag 'kvmarm-fixes-6.19-1':
KVM: arm64: Invert KVM_PGTABLE_WALK_HANDLE_FAULT to fix pKVM walkers
KVM: arm64: Don't blindly set set PSTATE.PAN on guest exit
KVM: arm64: nv: Respect stage-2 write permssion when setting stage-1 AF
KVM: arm64: Remove unused vcpu_{clear,set}_wfx_traps()
KVM: arm64: Remove unused parameter in synchronize_vcpu_pstate()
KVM: arm64: Remove extra argument for __pvkm_host_{share,unshare}_hyp()
KVM: arm64: Inject UNDEF for a register trap without accessor
KVM: arm64: Copy FGT traps to unprotected pKVM VCPU on VCPU load
KVM: arm64: Fix EL2 S1 XN handling for hVHE setups
KVM: arm64: gic: Check for vGICv3 when clearing TWI
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
SETUP_MODES already setup the initial values of CSR.CRMD, CSR.PRMD and
CSR.EUEN, so the redundant open code can be removed.
Fixes: 7b2afeafaf9c2d5 ("LoongArch: Adjust boot & setup for 32BIT/64BIT")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
x86_64 zero extends 32bit operations, so for 64bit operands, XOR r32,r32 is
functionally equal to XOR r64,r64, but avoids a REX prefix byte when legacy
registers are used.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Acked-by: Alexey Makhalov <alexey.makhalov@broadcom.com>
Link: https://patch.msgid.link/20260114211948.74774-2-ubizjak@gmail.com
|
|
The ethernet node has two MAC subnodes and cannot use the default
address/size cells: set address cells to 1 and size cells to 0.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
GCC inline asm treats semicolons as instruction separators, so a
semicolon after the last instruction is not required.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Alexey Makhalov <alexey.makhalov@broadcom.com>
Link: https://patch.msgid.link/20260114211948.74774-1-ubizjak@gmail.com
|
|
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Fixes: e7d5f2ea0923 ("perf/x86/intel/uncore: Add Nova Lake support")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://patch.msgid.link/20260114023652.3926117-1-nichen@iscas.ac.cn
|
|
Starting with Panther Cove, the rdpmc user disable feature is supported.
This feature allows the perf system to disable user space rdpmc reads at
the counter level.
Currently, when a global counter is active, any user with rdpmc rights
can read it, even if perf access permissions forbid it (e.g., disallow
reading ring 0 counters). The rdpmc user disable feature mitigates this
security concern.
Details:
- A new RDPMC_USR_DISABLE bit (bit 37) in each EVNTSELx MSR indicates
that the GP counter cannot be read by RDPMC in ring 3.
- New RDPMC_USR_DISABLE bits in IA32_FIXED_CTR_CTRL MSR (bits 33, 37,
41, 45, etc.) for fixed counters 0, 1, 2, 3, etc.
- When calling rdpmc instruction for counter x, the following pseudo
code demonstrates how the counter value is obtained:
If (!CPL0 && RDPMC_USR_DISABLE[x] == 1) ? 0 : counter_value;
- RDPMC_USR_DISABLE is enumerated by CPUID.0x23.0.EBX[2].
This patch extends the current global user space rdpmc control logic via
the sysfs interface (/sys/devices/cpu/rdpmc) as follows:
- rdpmc = 0:
Global user space rdpmc and counter-level user space rdpmc for all
counters are both disabled.
- rdpmc = 1:
Global user space rdpmc is enabled during the mmap-enabled time window,
and counter-level user space rdpmc is enabled only for non-system-wide
events. This prevents counter data leaks as count data is cleared
during context switches.
- rdpmc = 2:
Global user space rdpmc and counter-level user space rdpmc for all
counters are enabled unconditionally.
The new rdpmc settings only affect newly activated perf events; currently
active perf events remain unaffected. This simplifies and cleans up the
code. The default value of rdpmc remains unchanged at 1.
For more details about rdpmc user disable, please refer to chapter 15
"RDPMC USER DISABLE" in ISE documentation.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260114011750.350569-8-dapeng1.mi@linux.intel.com
|
|
Replace magic numbers in attr_rdpmc with macros to improve readability
and make their meanings clearer for users.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260114011750.350569-7-dapeng1.mi@linux.intel.com
|
|
This patch enables core PMU support for Novalake, covering both P-core
and E-core. It includes Arctic Wolf-specific counters and PEBS
constraints, and the model-specific OMR extra registers table.
Since Coyote Cove shares the same PMU capabilities as Panther Cove, the
existing Panther Cove PMU enabling functions are reused for Coyote Cove.
For detailed information about counter constraints, please refer to
section 16.3 "COUNTER RESTRICTIONS" in the ISE documentation.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260114011750.350569-6-dapeng1.mi@linux.intel.com
|
|
Similar to DMR (Panther Cove uarch), both P-core (Coyote Cove uarch) and
E-core (Arctic Wolf uarch) of NVL adopt the new PEBS memory auxiliary
info layout.
Coyote Cove microarchitecture shares the same PMU capabilities, including
the memory auxiliary info layout, with Panther Cove. Arctic Wolf
microarchitecture has a similar layout to Panther Cove, with the only
difference being specific data source encoding for L2 hit cases (up to
the L2 cache level). The OMR encoding remains the same as in Panther Cove.
For detailed information on the memory auxiliary info encoding, please
refer to section 16.2 "PEBS LOAD LATENCY AND STORE LATENCY FACILITY" in
the latest ISE documentation.
This patch defines Arctic Wolf specific data source encoding and then
supports PEBS memory auxiliary info field for NVL.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260114011750.350569-5-dapeng1.mi@linux.intel.com
|
|
This patch enables core PMU features for Diamond Rapids (Panther Cove
microarchitecture), including Panther Cove specific counter and PEBS
constraints, a new cache events ID table, and the model-specific OMR
events extra registers table.
For detailed information about counter constraints, please refer to
section 16.3 "COUNTER RESTRICTIONS" in the ISE documentation.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260114011750.350569-4-dapeng1.mi@linux.intel.com
|
|
With the introduction of the OMR feature, the PEBS memory auxiliary info
field for load and store latency events has been restructured for DMR.
The memory auxiliary info field's bit[8] indicates whether a L2 cache
miss occurred for a memory load or store instruction. If bit[8] is 0,
it signifies no L2 cache miss, and bits[7:0] specify the exact cache data
source (up to the L2 cache level). If bit[8] is 1, bits[7:0] represent
the OMR encoding, indicating the specific L3 cache or memory region
involved in the memory access. A significant enhancement is OMR encoding
provides up to 8 fine-grained memory regions besides the cache region.
A significant enhancement for OMR encoding is the ability to provide
up to 8 fine-grained memory regions in addition to the cache region,
offering more detailed insights into memory access regions.
For detailed information on the memory auxiliary info encoding, please
refer to section 16.2 "PEBS LOAD LATENCY AND STORE LATENCY FACILITY" in
the ISE documentation.
This patch ensures that the PEBS memory auxiliary info field is correctly
interpreted and utilized in DMR.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260114011750.350569-3-dapeng1.mi@linux.intel.com
|
