| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Remove MPS/MRRS Kconfig settings (CONFIG_PCIE_BUS_*) that worked
around a WiFi device defect; use a quirk or boot-time
"pci=pcie_bus_tune_*" kernel parameter instead (Bjorn Helgaas)
- Always lift 2.5GT/s restriction in PCIe failed link retraining to
avoid clamping a link to 2.5GT/s after hot-plug changes the device
(Maciej W. Rozycki)
- Request bus reassignment when not probe-only to fix an enumeration
regression on Marvell CN106XX and possibly other DT-based systems
(Ratheesh Kannoth)
- Fix procfs race between pci_proc_init() and pci_bus_add_device()
that resulted in 'proc_dir_entry ... already registered' warnings
and pointer corruption (Krzysztof Wilczyński)
- Fix sysfs race that causes 'duplicate filename' warnings and boot
panics by converting PCI resource files to static attributes
(Krzysztof Wilczyński)
- Expose sysfs 'resourceN_resize' attributes only on platforms with
PCI mmap (Krzysztof Wilczyński)
- Require CAP_SYS_ADMIN to write to sysfs 'resourceN_resize'
attributes (Krzysztof Wilczyński)
- Add security_locked_down(LOCKDOWN_PCI_ACCESS) to alpha PCI resource
mmap path to match the generic path (Krzysztof Wilczyński)
- Use kstrtobool() to parse the 'rom' attribute input to avoid the
unexpected behavior of enabling the ROM when writing '0' with no
trailing newline (Krzysztof Wilczyński)
Resource management:
- Improve resource claim logging for debuggability (Ilpo Järvinen)
- Clean up several uses of const parameters (Ilpo Järvinen)
- Check option ROM header signatures and lengths before accessing to
avoid page faults and alignment faults (Guixin Liu)
ASPM:
- Don't reconfigure ASPM when entering low-power D-state; only do it
when returning back to D0 (Carlos Bilbao)
Power management:
- During suspend, set power state to 'unknown' for all devices, not
just those with drivers (Lukas Wunner)
- Skip restoring Resizable BARs and VF Resizable BARs if device
doesn't respond to config reads, to avoid invalid array accesses
(Marco Nenciarini)
- Add pci_suspend_retains_context() so drivers can tell whether
devices retain internal state across suspend/resume, since some
platforms reset devices on suspend; use this in nvme to avoid
issues on Qcom RCs (Manivannan Sadhasivam)
Power control:
- Only to power on/off devices that actually support power control to
avoid poking at incompatible devices mentioned in DT (Manivannan
Sadhasivam)
Virtualization and resets:
- Log device readiness timeouts as errors, not warnings, because the
device is likely unusable in this case (Bjorn Helgaas)
- Wait for device readiness after soft reset (D3hot ->
D0uninitialized transition), when the device may respond with
Request Retry Status (RRS) if it needs more time to initialize
(Bjorn Helgaas)
- Drop unnecessary retries when restoring BARs because resets should
now already include all required delays (Lukas Wunner)
- Avoid FLR for MediaTek MT7925 WiFi, where FLR fails after a VM
terminates uncleanly (Jose Ignacio Tornos Martinez)
- Avoid SBR for Qualcomm WCN6855/WCN7850 WiFi, SDX62/SDX65 modems,
which seem not to support it correctly (Jose Ignacio Tornos
Martinez)
Peer-to-peer DMA:
- Prevent P2PDMA as well as CPU access to non-mappable BARs, e.g.,
s390 ISM BARs (Matt Evans)
- Add Intel QAT, DSA, IAA devices to whitelist (Lukas Wunner)
Endpoint framework:
- Add endpoint controller APIs for use by function drivers to
discover auxiliary blocks like DMA engines (Koichiro Den)
- Remember DesignWare eDMA engine base/size and expose them via the
EPC aux-resource API (Koichiro Den)
- Add endpoint embedded doorbell fallback, used if MSI allocation
fails (Koichiro Den)
- Validate BAR index and remove dead BAR read in endpoint doorbell
test (Carlos Bilbao)
- Unwind MSI/MSI-X vectors if NTB initialization fails part-way
through (Koichiro Den)
- Cache sleepable pci_irq_vector() value at ISR setup to avoid
calling it from hardirq context (Koichiro Den)
- Call sleepable pci_epc_raise_irq() from a work item instead of
atomic context, e.g., when setting bits in NTB peer doorbells in
the ntb_peer_db_set() path (Koichiro Den)
- Report 0-based vNTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Prevent configfs writes to vNTB db_count and other values that are
already in use after EPC attach (Koichiro Den)
- Account for vNTB db_valid reserved slots (link event 0 and
historically skipped slot 1) so they don't appear as valid
doorbells (Koichiro Den)
- Implement vNTB .db_vector_count()/mask() for doorbells so clients
can use multiple vectors and avoid thundering herds (Koichiro Den)
- Report 0-based NTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Fix doorbell bitmask and IRQ vector handling to clear only
specified bits, use the correct vector for non-contiguous Linux IRQ
numbers, and validate incoming vectors (Koichiro Den)
- Implement NTB .db_vector_count()/mask() for doorbells so clients
can use multiple vectors (Koichiro Den)
Native PCIe controller infrastructure:
- Add pci_host_common_link_train_delay() for the mandatory delay
after > 5GT/s Link training completes and use it for cadence HPA,
j721e, LGA; dwc; aardvark, mediatek-gen3, rzg3s (Hans Zhang)
- Protect root bus removal with rescan lock in altera, brcmstb,
cadence, dwc, iproc, mediatek, plda, rockchip to prevent
use-after-free or crashes when racing with sysfs rescan or hotplug
(Hans Zhang)
- Add pci_host_common_parse_ports() for use by any native driver to
parse Root Port properties (per-Link features like width, speed,
PHY, power and reset control, etc should be described in Root Port
stanzas, not the host bridge; currently only reset GPIOs
implemented) (Sherry Sun)
New native PCIe controller drivers:
- Add DT binding and driver for UltraRISC DP1000 PCIe controller
(Xincheng Zhang, Jia Wang)
Altera PCIe controller driver:
- Do not dispose of the parent IRQ mapping, which belongs to the
parent interrupt controller (Mahesh Vaidya)
- Fix chained IRQ handler ordering issue and resource leaks on probe
failure (Mahesh Vaidya)
AMD MDB PCIe controller driver:
- Assert PERST# on shutdown so any connected Endpoints are held in
reset during shutdown (Sai Krishna Musham)
Amlogic Meson PCIe controller driver:
- Propagate devm_add_action_or_reset() failure to fix probe error
path (Shuvam Pandey)
- Add .remove() callback to deinitialize the host bridge and power
off the PHY (Shuvam Pandey)
Broadcom iProc PCIe controller driver:
- Restore .map_irq() assignment; its removal broke INTx on the iproc
platform bus driver (Mark Tomlinson)
Broadcom STB PCIe controller driver:
- No change, but products using certain WiFi devices may be affected
by removal of CONFIG_PCIE_BUS_* (see above)
Freescale i.MX6 PCIe controller driver:
- Move IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling into the core reset
functions (Richard Zhu)
- Assert PERST# before enabling regulators to ensure that even if
power is enabled, endpoint stays inactive until REFCLK is stable
(Sherry Sun)
- Parse reset properties in Root Port nodes (falling back to host
bridge) to help support Key E connectors and the pwrctrl framework
(Sherry Sun)
- Configure i.MX95 REF_USE_PAD before PHY reset (Richard Zhu)
- Assert i.MX95 ref_clk_en after reference clock stabilizes (Richard
Zhu)
- Integrate new pwrctrl API for DTs with Root Port-level power
supplies (Sherry Sun)
Intel Gateway PCIe controller driver:
- Enable clock before PHY init for correct ordering (Florian Eckert)
- Add .start_link() callback so the driver works again (Florian
Eckert)
- Stop overwriting the ATU base address discovered by
dw_pcie_get_resources() (Florian Eckert)
- Add DT 'atu' region since this is hardware-specific, and fall back
to driver default if lacking (Florian Eckert)
Loongson PCIe controller driver:
- Ignore downstream devices only on internal bridges to avoid
Loongson hardware issue (Rong Zhang)
- Quirk old Loongson-3C6000 bridges that advertise incorrect
supported link speeds (Ziyao Li)
Marvell MVEBU PCIe controller driver:
- Use fixed-width interrupt masks to avoid truncation in 64-bit
builds (Rosen Penev)
MediaTek PCIe controller driver:
- Use FIELD_PREP() to fix incorrect operator precedence in
PCIE_FTS_NUM_L0 (Li RongQing)
- Fix IRQ domain leak when port fails to enable (Manivannan
Sadhasivam)
- Use actual physical address for MSI message address instead of
virt_to_phys() (Manivannan Sadhasivam)
- Add EcoNet EN7528 to DT binding (Caleb James DeLisle)
MediaTek PCIe Gen3 controller driver:
- Deassert PCIE_PHY_RSTB so REFCLK is stable for at least 100ms
(PCIE_T_PVPERL_MS) before deasserting PERST# (Jian Yang)
- Add .shutdown() to assert PERST# before powering down device (Jian
Yang)
- Do full device power down on removal, including asserting PERST#,
when removing driver (Chen-Yu Tsai)
- Fix a 'failed to create pwrctrl devices' error message that was
inadvertently skipped (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Program the DesignWare PORT_AFR L1 entrance latency based on the
'aspm-l1-entry-delay-ns' DT property (Manikanta Maddireddy)
Qualcomm PCIe controller driver:
- Add Eliza SoC compatible in DT binding (Krishna Chaitanya Chundru)
- Set max OPP during resume so DBI register accesses don't fail with
NoC errors (Qiang Yu)
- Add pci_host_common_d3cold_possible() to determine whether
downstream devices are already in D3hot and wakeup-enabled devices
are capable of generating PME from D3cold (Krishna Chaitanya
Chundru)
- Add .get_ltssm() callback to get the LTSSM status without DBI,
since DBI may be inaccessible after PME_Turn_Off (Krishna Chaitanya
Chundru)
- Power down PHY via PARF_PHY_CTRL before disabling rails/clocks to
avoid power leakage (Krishna Chaitanya Chundru)
- Decide whether suspend should put the link in L2 and power down
using pci_host_common_d3cold_possible() instead of checking whether
ASPM L1 is enabled (Krishna Chaitanya Chundru)
- Add qcom D3cold support to tear down interconnect bandwidth and OPP
votes (Krishna Chaitanya Chundru)
- Handle unsupported mixed PERST#/PHY DT configurations, e.g., PHY in
RP node while PERST# is in the RC node, but warn about the DT issue
(Qiang Yu)
- Program T_POWER_ON based on DT 't-power-on-us' property in case
hardware advertises incorrect values (Krishna Chaitanya Chundru)
- Disable ASPM L0s for SA8775P (Shawn Guo)
- Initialize DWC MSI lock for firmware-managed ECAM hosts, which
don't use the dw_pcie_host_init() path that initializes the lock
(Yadu M G)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/V2N DT support (Lad Prabhakar)
SOPHGO PCIe controller driver:
- Add 'dma-coherent' DT property for sg2042-pcie driver (Han Gao)
Synopsys DesignWare PCIe controller driver:
- Apply ECRC TLP Digest workaround for all DesignWare cores prior to
5.10a, not just 4.90a and 5.00a (Manikanta Maddireddy)
- Use common struct dw_pcie 'mode' rather than duplicating it in
artpec6, dra7xx, dwc-pcie, and keembay driver structs (Hans Zhang)
- Use DEFINE_SHOW_ATTRIBUTE for ltssm_status debugfs to reduce
boilerplate and fix a seq_file memory leak by including a
.release() callback (Hans Zhang)
- Fix a signedness bug in fault injection test code (Dan Carpenter)
- Avoid NULL pointer dereference when tearing down debugfs for
controller that lacks RAS DES capability (Shuvam Pandey)
MicroSemi Switchtec management driver:
- Add Gen6 Device IDs (Ben Reed)
Miscellaneous:
- Remove unused gpio.h include from amd-mdb, designware-plat, fu740,
visconti drivers (Andy Shevchenko)
- Fix typos in documentation (josh ziegler)
- Use FIELD_MODIFY() instead of open-coding it (Hans Zhang)"
* tag 'pci-v7.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (168 commits)
PCI/sysfs: Use kstrtobool() to parse the ROM attribute input
PCI/sysfs: Limit BAR resize attribute scope to platforms with PCI mmap
PCI/sysfs: Remove pci_create_legacy_files() and pci_sysfs_init()
PCI/sysfs: Convert legacy I/O and memory attributes to static definitions
PCI/sysfs: Add __weak pci_legacy_has_sparse() helper
alpha/PCI: Compute legacy size in pci_mmap_legacy_page_range()
PCI: Add macros for legacy I/O and memory address space sizes
PCI/sysfs: Remove pci_{create,remove}_sysfs_dev_files()
alpha/PCI: Convert resource files to static attributes
alpha/PCI: Add static PCI resource attribute macros
alpha/PCI: Remove WARN from __pci_mmap_fits() and __legacy_mmap_fits()
alpha/PCI: Fix __pci_mmap_fits() overflow for zero-length BARs
alpha/PCI: Use PCI resource accessor macros
alpha/PCI: Use BAR index in sysfs attr->private instead of resource pointer
alpha/PCI: Add security_locked_down() check to pci_mmap_resource()
PCI/sysfs: Limit pci_sysfs_init() late_initcall compile scope
PCI/sysfs: Add stubs for pci_{create,remove}_sysfs_dev_files()
PCI/sysfs: Warn about BAR resize failure in __resource_resize_store()
PCI/sysfs: Convert PCI resource files to static attributes
PCI/proc: Fix race between pci_proc_init() and pci_bus_add_device()
...
|
|
Currently, legacy_io and legacy_mem are dynamically allocated and created
by pci_create_legacy_files(), with pci_adjust_legacy_attr() updating the
attributes at runtime on Alpha to rename them and shift the size for sparse
addressing.
Convert to four static const attributes (legacy_io, legacy_io_sparse,
legacy_mem, legacy_mem_sparse) with .is_bin_visible() callbacks that use
pci_legacy_has_sparse() to select the appropriate variant per bus. The
sizes are compile-time constants and .size is set directly on each
attribute.
Register the groups in pcibus_groups[] under a HAVE_PCI_LEGACY guard so the
driver model handles creation and removal automatically.
Stub out pci_create_legacy_files() and pci_remove_legacy_files() as the
dynamic creation is no longer needed. Remove the __weak
pci_adjust_legacy_attr(), Alpha's override, and its declaration from both
Alpha and PowerPC asm/pci.h headers.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-23-kwilczynski@kernel.org
|
|
Currently, Alpha's sparse/dense legacy attribute handling is done via
pci_adjust_legacy_attr(), which updates dynamically allocated attributes at
runtime. The upcoming conversion to static attributes needs a way to
determine sparse support at visibility check time.
Add a __weak pci_legacy_has_sparse() that returns false by default. Alpha
overrides it to check has_sparse() on the bus host controller.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-22-kwilczynski@kernel.org
|
|
Currently, pci_mmap_legacy_page_range() reads the legacy resource size from
bus->legacy_mem->size or bus->legacy_io->size. This couples the mmap
bounds check to the struct pci_bus fields that will be removed when legacy
attributes are converted to static definitions.
Compute the size directly using PCI_LEGACY_MEM_SIZE (0x100000) and
PCI_LEGACY_IO_SIZE (0xffff) macros, and shift by 5 bits for sparse systems.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://patch.msgid.link/20260508043543.217179-21-kwilczynski@kernel.org
|
|
Previously, Alpha's PCI resource files (resourceN, resourceN_sparse,
resourceN_dense) were dynamically created by pci_create_resource_files(),
which overrides the generic __weak implementation. The previous code
allocated bin_attributes at runtime and managed them via the res_attr[] and
res_attr_wc[] fields in struct pci_dev.
Convert to static const attributes with three attribute groups (plain,
sparse, dense), each with an .is_bin_visible() callback that checks
resource length, has_sparse(), and sparse_mem_mmap_fits(). A .bin_size()
callback provides the resource size to the kernfs node, with the sparse
variant shifting by 5 bits for byte-level addressing.
Register the groups via ARCH_PCI_DEV_GROUPS so the driver model handles
creation and removal automatically.
Use the new pci_resource_is_mem() helper for the type check, replacing the
open-coded bitwise flag test.
Finally, remove pci_create_resource_files(), pci_remove_resource_files(),
pci_create_attr(), and pci_create_one_attr() which are no longer needed.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://patch.msgid.link/20260508043543.217179-18-kwilczynski@kernel.org
|
|
Add macros for declaring static binary attributes for Alpha's PCI resource
files:
- pci_dev_resource_attr(), for dense/BWX systems (mmap dense)
- pci_dev_resource_sparse_attr(), for sparse systems (mmap sparse)
- pci_dev_resource_dense_attr(), for dense companion files (mmap dense)
Each macro creates a const bin_attribute with the BAR index stored in the
.private property and the appropriate .mmap() callback.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://patch.msgid.link/20260508043543.217179-17-kwilczynski@kernel.org
|
|
Remove the WARN() that fires when userspace attempts to mmap beyond the BAR
bounds. The check still returns 0 to reject the mapping, but the warning
is excessive for normal operation.
A similar warning was removed from the PCI core in the commit 3b519e4ea618
("PCI: fix size checks for mmap() on /proc/bus/pci files").
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: squash https://lore.kernel.org/all/20260508045824.GA3160093@rocinante]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://patch.msgid.link/20260508043543.217179-16-kwilczynski@kernel.org
|
|
Currently, __pci_mmap_fits() computes the BAR size using
"pci_resource_len() - 1", which wraps to a large value when the BAR length
is zero, causing the bounds check to incorrectly succeed.
Add an early return for empty resources.
Fixes: 10a0ef39fbd1 ("PCI/alpha: pci sysfs resources")
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://patch.msgid.link/20260508043543.217179-15-kwilczynski@kernel.org
|
|
Replace direct pdev->resource[] accesses with pci_resource_n(), and
open-coded res->flags type checks with pci_resource_is_mem() and
pci_resource_start() helpers.
While at it, move the pci_resource_n() call directly into
pcibios_resource_to_bus() and drop the local struct resource pointer.
No functional changes intended.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://patch.msgid.link/20260508043543.217179-14-kwilczynski@kernel.org
|
|
Currently, Alpha's pci_create_one_attr() stores a resource pointer in
attr->private, and pci_mmap_resource() loops through all BARs to find
the matching index.
Store the BAR index directly in attr->private and retrieve the resource via
pci_resource_n(). This eliminates the loop and aligns with the convention
used by the generic PCI sysfs code.
The PCI core change was first added in the commit dca40b186b75 ("PCI: Use
BAR index in sysfs attr->private instead of resource pointer").
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://patch.msgid.link/20260508043543.217179-13-kwilczynski@kernel.org
|
|
Currently, Alpha's pci_mmap_resource() does not check
security_locked_down(LOCKDOWN_PCI_ACCESS) before allowing userspace to mmap
PCI BARs.
The generic version has had this check since commit eb627e17727e ("PCI:
Lock down BAR access when the kernel is locked down") to prevent DMA
attacks when the kernel is locked down.
Add the same check to Alpha's pci_mmap_resource().
Fixes: eb627e17727e ("PCI: Lock down BAR access when the kernel is locked down")
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://patch.msgid.link/20260508043543.217179-12-kwilczynski@kernel.org
|
|
strncpy() has no remaining callers in the kernel[1]. Remove the
alpha-specific assembly implementation and __HAVE_ARCH_STRNCPY define,
falling back to the generic version in lib/string.c.
The __stxncpy helper (stxncpy.S/ev6-stxncpy.S) is retained as it is
still used by strncat.
Link: https://github.com/KSPP/linux/issues/90 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Beside the removal of the Hercules monochrome ISA graphics driver and
the corresponding text console driver, there is just the typical
maintanance with smaller driver fixes and cleanups:
Removal of drivers:
- Hercules monochrome ISA graphics adapter driver (Ethan Nelson-Moore)
- Hercules mdacon console driver (Ethan Nelson-Moore)
Changes affecting many drivers at once:
- possible memory leak fixes in various drivers (Abdun Nihaal)
- many conversions to use strscpy() (David Laight)
- Use named initializers in drivers (Uwe Kleine-König)
Code fixes:
- fbcon: don't suspend/resume when vc is graphics mode (Lu Yao)
- modedb: fix a possible UAF in fb_find_mode() (Tuo Li)
- modedb: Fix entry for 1920x1080-60 mode (Steffen Persvold)
- arm: Export acorndata_8x8 font symbol for bootloader (Helge Deller)
- omap2: fix use-after-free in omapfb_mmap (Hongling Zeng)
Cleanups:
- pxa168fb: use devm_ioremap_resource() (Alberto Arostegui)
- provice helpers for fb_set_var() and fb_blank() and fbcon updates
(Thomas Zimmermann)
- fbcon: Use correct type for vc_resize() return value (Jiacheng Yu)
- chipsfb: add missing MODULE_DESCRIPTION() macro (Rahman Mahmutović)
- sunxvr2500: replace printk with device-aware logging functions
(Rahman Mahmutović)
- sm712: Fix operator precedence in big_swap macro (Li RongQing)
- imxfb: Use of_device_get_match_data() (Rosen Penev)
- atmel_lcdfb: Use of_device_get_match_data() (Rosen Penev)
Documentation fixes:
- grvga: Fix CLUT register address offset in comment (Eduardo Silva)
- omap/dss: Fix stale modedb.c path (Costa Shulyupin)
- correct CONFIG_FB_TILEBLITTING macro name in #endif comment (Ethan
Nelson-Moore)"
* tag 'fbdev-for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (43 commits)
fbdev: modedb: Fix misaligned fields in the 1920x1080-60 mode
fbdev: modedb: fix a possible UAF in fb_find_mode()
fbdev: s3fb: Use strscpy() to copy strings into arrays
fbdev: sm501fb: Fix buffer errors in OF binding code
fbcon: correct CONFIG_FB_TILEBLITTING macro name in #endif comment
fbdev/arm: Export acorndata_8x8 font symbol for bootloader
fbdev: mmpfb: Use strscpy() to copy device name
fbdev: sisfb: Replace strlen() strcpy() pair with strscpy()
fbdev: rivafb: Use strscpy() to copy device name
fbdev: cyber2000fb: Use strscpy() to copy device name
fbdev: atmel_lcdfb: Use strscpy() to copy device name
fbdev: Do not export fbcon from fbdev
fbdev: Wrap fbcon updates from vga-switcheroo in helper
fbdev: Wrap user-invoked calls to fb_blank() in helper
fbdev: Wrap user-invoked calls to fb_set_var() in helper
fbdev: omap2: fix use-after-free in omapfb_mmap
docs: omap/dss: Fix stale modedb.c path
fbdev: pxa168fb: use devm_ioremap_resource() for MMIO
fbdev: grvga: Fix CLUT register address offset in comment
fbdev: sunxvr2500: replace printk with device-aware logging functions
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull interrupt core updates from Thomas Gleixner:
- Rework of /proc/interrupt handling:
/proc/interrupts was subject to micro optimizations for a long time,
but most of the low hanging fruit was left on the table. This rework
addresses the major time consuming issues:
- Printing a long series of zeros one by one via a format string
instead of counting subsequent zeros and emitting a string
constant.
- Simplify and cache the conditions whether interrupts should be
printed
- Use a proper iteration over the interrupt descriptor xarray
instead of walking and testing one by one.
- Provide helper functions for the architecture code to emit the
architecture specific counters
- Convert the counter structure in x86 to an array, which
simplifies the output and add mechanisms to suppress unused
architecture interrupts, which just occupy space for nothing.
Adopt the new core mechanisms.
This adjusts the gdb scripts related to interrupt counter statistics
to work with the new mechanisms.
- Prevent a string overflow in the /proc/irq/$N/ directory name
creation code.
* tag 'irq-core-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
x86/irq: Add missing 's' back to thermal event printout
genirq/proc: Speed up /proc/interrupts iteration
genirq/proc: Runtime size the chip name
genirq: Expose irq_find_desc_at_or_after() in core code
genirq: Add rcuref count to struct irq_desc
genirq/proc: Increase default interrupt number precision to four
genirq: Calculate precision only when required
genirq: Cache the condition for /proc/interrupts exposure
genirq/manage: Make NMI cleanup RT safe
genirq: Expose nr_irqs in core code
scripts/gdb: Update x86 interrupts to the array based storage
x86/irq: Move IOAPIC misrouted and PIC/APIC error counts into irq_stats
x86/irq: Suppress unlikely interrupt stats by default
x86/irq: Make irqstats array based
genirq/proc: Utilize irq_desc::tot_count to avoid evaluation
genirq/proc: Avoid formatting zero counts in /proc/interrupts
x86/irq: Optimize interrupts decimals printing
genirq/proc: Size interrupt directory names for 10-digit interrupt numbers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Features:
- Reduce pipe->mutex contention by pre-allocating pages outside the
lock in anon_pipe_write().
anon_pipe_write() called alloc_page() once per page while holding
pipe->mutex. The allocation can sleep doing direct reclaim and runs
memcg charging, which extends the critical section and stalls any
concurrent reader on the same mutex. Now up to 8 pages are
pre-allocated before the mutex is taken, leftovers are recycled
into the per-pipe tmp_page[] cache before unlock, and any remainder
is released after unlock, keeping the allocator out of the critical
section on both sides. On a writers x readers sweep with 64KB
writes against a 1 MB pipe throughput improves 6-28% and average
write latency drops 5-22%; under memory pressure - when the cost of
holding the mutex across reclaim is highest - throughput improves
21-48% and latency drops 17-33%. The microbenchmark is added to
selftests.
- uaccess/sockptr: fix the ignored_trailing logic in
copy_struct_to_user() to behave as documented and the usize check
in copy_struct_from_sockptr() for user pointers, and add
copy_struct_{from,to}_bounce_buffer() and copy_struct_to_sockptr()
helpers for upcoming users (IPPROTO_SMBDIRECT, IPPROTO_QUIC).
- bpf: add a sleepable bpf_real_inode() kfunc that resolves the real
inode backing a dentry via d_real_inode(). On overlayfs the inode
attached to the dentry doesn't carry the underlying device
information; this is used by the filesystem restriction BPF program
that was merged into systemd.
- docs: add guidelines for submitting new filesystems, motivated by
the maintenance burden abandoned and untestable filesystems impose
on VFS developers, blocking infrastructure work like folio
conversions and iomap migration.
Fixes:
- libfs: set SB_I_NOEXEC and SB_I_NODEV by default in init_pseudo()
and drop the now-redundant assignments in callers. This began as a
one-line dma-buf fix for a path_noexec() warning; a pseudo
filesystem has no reason not to set SB_I_NOEXEC. All init_pseudo()
callers were audited: the only visible effect is on dma-buf where
SB_I_NOEXEC silences the warning.
- Handle set_blocksize() failures in legacy filesystems (bfs, hpfs,
qnx4, jfs, befs, affs, isofs, minix, ntfs3, omfs). Mounting a
device with a sector size > PAGE_SIZE crashed roughly half of them;
the rest had the same missing error handling pattern. Plus a
follow-up releasing the superblock buffer_head when setting the
minix v3 block size fails.
- mount: honour SB_NOUSER in the new mount API.
- fs/fcntl: fix a SOFTIRQ-unsafe lock order in fasync signaling by
switching the process-group paths of send_sigio() and send_sigurg()
from read_lock(&tasklist_lock) to RCU, matching the single-PID
path.
- vfs: add an FS_USERNS_DELEGATABLE flag and set it for NFS, fixing
delegated NFS mounts (fsopen() in a container with the mount
performed by a privileged daemon) that broke when non-init
s_user_ns was tied to FS_USERNS_MOUNT.
- selftests/namespaces: fix a hang in nsid_test where an unreaped
grandchild kept the TAP pipe write-end open, a waitpid(-1) race in
listns_efault_test, and a false FAIL on kernels without listns()
where the tests should SKIP.
- filelock: fix the break_lease() stub signature for
CONFIG_FILE_LOCKING=n.
- init/initramfs_test: wait for the async initramfs unpacking before
running; the test and do_populate_rootfs() share the parser state.
- fs/coredump: reduce redundant log noise in
validate_coredump_safety().
- iomap: pass the correct length to fserror_report_io() in
__iomap_write_begin().
- backing-file: fix the backing_file_open() kerneldoc.
Cleanups:
- initramfs: refactor the cpio hex header parsing to use hex2bin()
instead of the hand-rolled simple_strntoul() which is reverted, and
extend the initramfs KUnit tests to cover header fields with 0x
prefixes.
- Replace __get_free_pages() and friends with kmalloc()/kzalloc()
across quota, proc, ocfs2/dlm, nilfs2, nfs, nfsd, libfs, jfs, jbd2,
isofs, fuse, select, namespace, configfs, binfmt_misc, bfs, and the
do_mounts init code - part of the larger work of replacing page
allocator calls with kmalloc().
- Use clear_and_wake_up_bit() in unlock_buffer() and
journal_end_buffer_io_sync() instead of open-coding the sequence.
- Drop unused VFS exports: unexport drop_super_exclusive(), remove
start_removing_user_path_at(), and fold __start_removing_path()
into start_removing_path().
- fs/read_write: narrow the __kernel_write() export with
EXPORT_SYMBOL_FOR_MODULES().
- vfs: uapi: retire octal and hex constants in favor of (1 << n) for
the O_ flags. Finding a free bit for a new flag across the
architectures was needlessly hard with the mixed bases.
- dcache: add extra sanity checks of dead dentries in dentry_free()
via a new DENTRY_WARN_ONCE() that also prints d_flags.
- iov_iter: use kmemdup_array() in dup_iter() to harden the
allocation against multiplication overflow.
- fs/pipe: write to ->poll_usage only once.
- vfs: remove an always-taken if-branch in find_next_fd().
- dcache: use kmalloc_flex() for struct external_name in __d_alloc().
- namei: use QSTR() instead of QSTR_INIT() in path_pts().
- sync_file_range: delete dead S_ISLNK code.
- Comment fixes: retire a stale comment in fget_task_next() and fix
assorted spelling mistakes"
* tag 'vfs-7.2-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (73 commits)
backing-file: fix backing_file_open() kerneldoc parameter
iomap: pass the correct len to fserror_report_io in __iomap_write_begin
vfs: add FS_USERNS_DELEGATABLE flag and set it for NFS
filelock: fix break_lease() stub signature for CONFIG_FILE_LOCKING=n
vfs: uapi: retire octal and hex numbers in favor of (1 << n) for O_ flags
bpf: add bpf_real_inode() kfunc
fs/read_write: Do not export __kernel_write() to the entire world
libfs: drop redundant SB_I_NOEXEC/SB_I_NODEV in init_pseudo() callers
libfs: set SB_I_NOEXEC and SB_I_NODEV by default in init_pseudo()
mount: honour SB_NOUSER in the new mount API
fs/fcntl: fix SOFTIRQ-unsafe lock order in fasync signaling
selftests/pipe: add pipe_bench microbenchmark
fs/pipe: pre-allocate pages outside pipe->mutex in anon_pipe_write
fs: retire stale comment in fget_task_next()
fs: fix spelling mistakes in comment
bfs: replace get_zeroed_page() with kzalloc()
binfmt_misc: replace __get_free_page() with kmalloc()
configfs: replace __get_free_pages() with kzalloc()
fs/namespace: use __getname() to allocate mntpath buffer
fs/select: replace __get_free_page() with kmalloc()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull openat2 updates from Christian Brauner:
"Features:
- Add O_EMPTYPATH to openat(2)/openat2(2). To get an operable file
descriptor from an O_PATH file descriptor it is possible to use
openat(fd, ".", O_DIRECTORY) for directories, but other file types
require going through open("/proc/<pid>/fd/<nr>") and thus depend
on a functioning procfs.
With O_EMPTYPATH an empty path string is accepted and LOOKUP_EMPTY
is set at path resolution time, allowing to reopen the file behind
the file descriptor directly. Selftests are included.
- Add an OPENAT2_REGULAR flag for openat2(2) which refuses to open
anything but regular files with the new EFTYPE error code.
This implements the "ability to only open regular files" feature
requested by userspace via uapi-group.org and protects services
from being redirected to fifos, device nodes, and friends.
All atomic_open implementations were audited for OPENAT2_REGULAR
handling. Explicit checks were added to ceph, gfs2, nfs (v4), and
cifs/smb - these are the filesystems whose atomic_open can
encounter an existing non-regular file and would otherwise call
finish_open() on it or return a misleading error code.
The remaining implementations (9p, fuse, vboxsf, nfs v2/v3) only
call finish_open() on freshly created files and use
finish_no_open() for lookup hits, letting the VFS catch non-regular
files via the do_open() safety net.
Cleanups:
- Migrate the openat2 selftests to the kselftest harness and move
them under selftests/filesystems/. The tests were written in the
early days of selftests' TAP support and the modern kselftest
harness is much easier to follow and maintain. The contents of the
tests are unchanged and the new emptypath tests are ported on top.
- Make the LAST_XXX last-type constants private to fs/namei.c. The
only user outside of fs/namei.c was ksmbd which only needs to know
whether the last component is a regular one, so
vfs_path_parent_lookup() now performs the LAST_NORM check
internally. The ints are replaced with a dedicated enum last_type"
* tag 'vfs-7.2-rc1.openat2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
vfs: replace ints with enum last_type for LAST_XXX
vfs: make LAST_XXX private to fs/namei.c
selftests: openat2: port emptypath_test to kselftest harness
kselftest/openat2: test for OPENAT2_REGULAR flag
openat2: new OPENAT2_REGULAR flag support
openat2: introduce EFTYPE error code
selftest: add tests for O_EMPTYPATH
vfs: add O_EMPTYPATH to openat(2)/openat2(2)
selftests: openat2: migrate to kselftest harness
selftests: openat2: switch from custom ARRAY_LEN to ARRAY_SIZE
selftests: openat2: move helpers to header
selftests: move openat2 tests to selftests/filesystems/
|
|
A recent build failure[1] exposed the diffculty of working with the
current octal and hex definitions of O_ flags when trying to find a gap
for a new flag. This difficulty is compounded by the fact that O_ flags
may have architectural specific values.
Replace the hex/octal #defines, which are hard to parse when looking for
free bits, with explicit bit shifts like (1 << 11). Also, add comments
that identify which architectures redefine some of the seemingly free
("cursed") bits in uapi/asm-generic/fcntl.h. These should not be used to
define new O_ flags (for now, at least).
The translastion was done with Claude Opus 4.8, and verified with a
(non-AI) gawk script. The accounting of which architectures claim
which bit-gaps in uapi/asm-generic/fcntl.h is also done by hand.
[1]: https://lore.kernel.org/all/agruPPybCx8q2XcJ@sirena.org.uk/
Assisted-by: Claude:Opus 4.8
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Link: https://patch.msgid.link/20260604222405.5382-1-jkoolstra@xs4all.nl
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
Quite some architectures have four character wide acronyms for architecture
specific interrupts like IPI, NMI, etc.
The default precision of printing the Linux device interrupt numbers is
three, which causes quite some code to play games with adding or omitting
space after the acronym and the colon in order to keep the per CPU numbers
properly aligned.
Increase the default number precision to four in the core code and get rid
of the space games all over the place. At the same time align all
architecture specific descriptor texts left so that they show up in the
same column as the interrupt chip names, which makes the output more
uniform accross architectures. Fix up the GDB script to this new scheme as
well.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260517194931.839482411@kernel.org
|
|
On real hardware, panic and machine reboot may not flush hardware cache
to memory. This means the persistent ring buffer, which relies on a
coherent state of memory, may not have its events written to the buffer
and they may be lost. Moreover, there may be inconsistency with the
counters which are used for validation of the integrity of the
persistent ring buffer which may cause all data to be discarded.
To avoid this issue, stop recording of the ring buffer on panic and
flush the cache of the ring buffer's memory.
Fixes: e645535a954a ("tracing: Add option to use memmapped memory for trace boot instance")
Cc: stable@vger.kernel.org
Cc: Will Deacon <will@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ian Rogers <irogers@google.com>
Link: https://patch.msgid.link/177751969602.2136606.12031934362587643488.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Introduce a new error code EFTYPE for wrong file type operations.
EFTYPE is already used in BSD systems like FreeBSD and macOS.
This will be used by the upcoming OPENAT2_REGULAR flag support to
return a specific error when a path doesn't refer to a regular file.
Signed-off-by: Dorjoy Chowdhury <dorjoychy111@gmail.com>
Link: https://patch.msgid.link/20260328172314.45807-2-dorjoychy111@gmail.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Aleksa Sarai <aleksa@amutable.com>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
The mdacon driver supports using ISA MDA or Hercules-compatible display
adapters as a secondary text console. This was commonly used in the
1990s and earlier for debugging software which took over the primary
display. It is highly unlikely anyone is doing so nowadays because
serial consoles and much better methods of debugging exist.
The driver is not enabled by any defconfig, nor any of the
dozens of distro configs collected at [1]. It has been relegated to VTs
13-16 since commit 0b9cf3aa6b1e ("mdacon messing up default vc's - set
default to vc13-16 again") in Linux 2.6.27 (and before Linux 2.5.53 -
see the link in the message of the above commit). The change in 2.6.27
was done because it was incorrectly detecting non-MDA adapters as MDA
and taking over all VTs, rendering them unusable.
Furthermore, vgacon supports using MDA/Hercules-compatible adapters as
the primary text console, so any systems with only one of these
adapters were already using vgacon and will not experience any loss in
functionality from the removal of this driver.
Given all of these factors, the mdacon driver is likely entirely
unused. Remove it.
[1] https://github.com/nyrahul/linux-kernel-configs/tree/f0bee86a135a0406ea427855f52702dd00d770f9
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking deletions from Jakub Kicinski:
"Delete some obsolete networking code
Old code like amateur radio and NFC have long been a burden to core
networking developers. syzbot loves to find bugs in BKL-era code, and
noobs try to fix them.
If we want to have a fighting chance of surviving the LLM-pocalypse
this code needs to find a dedicated owner or get deleted. We've talked
about these deletions multiple times in the past and every time
someone wanted the code to stay. It is never very clear to me how many
of those people actually use the code vs are just nostalgic to see it
go. Amateur radio did have occasional users (or so I think) but most
users switched to user space implementations since its all super slow
stuff. Nobody stepped up to maintain the kernel code.
We were lucky enough to find someone who wants to help with NFC so
we're giving that a chance. Let's try to put the rest of this code
behind us"
* tag 'net-deletions' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next:
drivers: net: 8390: wd80x3: Remove this driver
drivers: net: 8390: ultra: Remove this driver
drivers: net: 8390: AX88190: Remove this driver
drivers: net: fujitsu: fmvj18x: Remove this driver
drivers: net: smsc: smc91c92: Remove this driver
drivers: net: smsc: smc9194: Remove this driver
drivers: net: amd: nmclan: Remove this driver
drivers: net: amd: lance: Remove this driver
drivers: net: 3com: 3c589: Remove this driver
drivers: net: 3com: 3c574: Remove this driver
drivers: net: 3com: 3c515: Remove this driver
drivers: net: 3com: 3c509: Remove this driver
net: packetengines: remove obsolete yellowfin driver and vendor dir
net: packetengines: remove obsolete hamachi driver
net: remove unused ATM protocols and legacy ATM device drivers
net: remove ax25 and amateur radio (hamradio) subsystem
net: remove ISDN subsystem and Bluetooth CMTP
caif: remove CAIF NETWORK LAYER
|
|
Similar to the hamachi driver, the yellowfin driver supports hardware
that is over two decades old and no longer in active use.
Since yellowfin was the last remaining driver in the packetengines
vendor directory, we can now safely remove the entire directory and
drop its associated references from the parent Kconfig and Makefile.
This eliminates dead code and reduces the overall maintenance burden
on the netdev subsystem.
Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260422044820.485660-3-25181214217@stu.xidian.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lindholm/alpha
Pull alpha updates from Magnus Lindholm:
"One fix to silence pgprot_modify() compiler warnings, and one patch
adding SECCOMP/SECCOMP_FILTER support together with the syscall and
ptrace fixes needed for it"
* tag 'alpha-for-v7.1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/lindholm/alpha:
alpha: Define pgprot_modify to silence tautological comparison warnings
alpha: add support for SECCOMP and SECCOMP_FILTER
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "pid: make sub-init creation retryable" (Oleg Nesterov)
Make creation of init in a new namespace more robust by clearing away
some historical cruft which is no longer needed. Also some
documentation fixups
- "selftests/fchmodat2: Error handling and general" (Mark Brown)
Fix and a cleanup for the fchmodat2() syscall selftest
- "lib: polynomial: Move to math/ and clean up" (Andy Shevchenko)
- "hung_task: Provide runtime reset interface for hung task detector"
(Aaron Tomlin)
Give administrators the ability to zero out
/proc/sys/kernel/hung_task_detect_count
- "tools/getdelays: use the static UAPI headers from
tools/include/uapi" (Thomas Weißschuh)
Teach getdelays to use the in-kernel UAPI headers rather than the
system-provided ones
- "watchdog/hardlockup: Improvements to hardlockup" (Mayank Rungta)
Several cleanups and fixups to the hardlockup detector code and its
documentation
- "lib/bch: fix undefined behavior from signed left-shifts" (Josh Law)
A couple of small/theoretical fixes in the bch code
- "ocfs2/dlm: fix two bugs in dlm_match_regions()" (Junrui Luo)
- "cleanup the RAID5 XOR library" (Christoph Hellwig)
A quite far-reaching cleanup to this code. I can't do better than to
quote Christoph:
"The XOR library used for the RAID5 parity is a bit of a mess right
now. The main file sits in crypto/ despite not being cryptography
and not using the crypto API, with the generic implementations
sitting in include/asm-generic and the arch implementations
sitting in an asm/ header in theory. The latter doesn't work for
many cases, so architectures often build the code directly into
the core kernel, or create another module for the architecture
code.
Change this to a single module in lib/ that also contains the
architecture optimizations, similar to the library work Eric
Biggers has done for the CRC and crypto libraries later. After
that it changes to better calling conventions that allow for
smarter architecture implementations (although none is contained
here yet), and uses static_call to avoid indirection function call
overhead"
- "lib/list_sort: Clean up list_sort() scheduling workarounds"
(Kuan-Wei Chiu)
Clean up this library code by removing a hacky thing which was added
for UBIFS, which UBIFS doesn't actually need
- "Fix bugs in extract_iter_to_sg()" (Christian Ehrhardt)
Fix a few bugs in the sca |
