| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Remove MPS/MRRS Kconfig settings (CONFIG_PCIE_BUS_*) that worked
around a WiFi device defect; use a quirk or boot-time
"pci=pcie_bus_tune_*" kernel parameter instead (Bjorn Helgaas)
- Always lift 2.5GT/s restriction in PCIe failed link retraining to
avoid clamping a link to 2.5GT/s after hot-plug changes the device
(Maciej W. Rozycki)
- Request bus reassignment when not probe-only to fix an enumeration
regression on Marvell CN106XX and possibly other DT-based systems
(Ratheesh Kannoth)
- Fix procfs race between pci_proc_init() and pci_bus_add_device()
that resulted in 'proc_dir_entry ... already registered' warnings
and pointer corruption (Krzysztof Wilczyński)
- Fix sysfs race that causes 'duplicate filename' warnings and boot
panics by converting PCI resource files to static attributes
(Krzysztof Wilczyński)
- Expose sysfs 'resourceN_resize' attributes only on platforms with
PCI mmap (Krzysztof Wilczyński)
- Require CAP_SYS_ADMIN to write to sysfs 'resourceN_resize'
attributes (Krzysztof Wilczyński)
- Add security_locked_down(LOCKDOWN_PCI_ACCESS) to alpha PCI resource
mmap path to match the generic path (Krzysztof Wilczyński)
- Use kstrtobool() to parse the 'rom' attribute input to avoid the
unexpected behavior of enabling the ROM when writing '0' with no
trailing newline (Krzysztof Wilczyński)
Resource management:
- Improve resource claim logging for debuggability (Ilpo Järvinen)
- Clean up several uses of const parameters (Ilpo Järvinen)
- Check option ROM header signatures and lengths before accessing to
avoid page faults and alignment faults (Guixin Liu)
ASPM:
- Don't reconfigure ASPM when entering low-power D-state; only do it
when returning back to D0 (Carlos Bilbao)
Power management:
- During suspend, set power state to 'unknown' for all devices, not
just those with drivers (Lukas Wunner)
- Skip restoring Resizable BARs and VF Resizable BARs if device
doesn't respond to config reads, to avoid invalid array accesses
(Marco Nenciarini)
- Add pci_suspend_retains_context() so drivers can tell whether
devices retain internal state across suspend/resume, since some
platforms reset devices on suspend; use this in nvme to avoid
issues on Qcom RCs (Manivannan Sadhasivam)
Power control:
- Only to power on/off devices that actually support power control to
avoid poking at incompatible devices mentioned in DT (Manivannan
Sadhasivam)
Virtualization and resets:
- Log device readiness timeouts as errors, not warnings, because the
device is likely unusable in this case (Bjorn Helgaas)
- Wait for device readiness after soft reset (D3hot ->
D0uninitialized transition), when the device may respond with
Request Retry Status (RRS) if it needs more time to initialize
(Bjorn Helgaas)
- Drop unnecessary retries when restoring BARs because resets should
now already include all required delays (Lukas Wunner)
- Avoid FLR for MediaTek MT7925 WiFi, where FLR fails after a VM
terminates uncleanly (Jose Ignacio Tornos Martinez)
- Avoid SBR for Qualcomm WCN6855/WCN7850 WiFi, SDX62/SDX65 modems,
which seem not to support it correctly (Jose Ignacio Tornos
Martinez)
Peer-to-peer DMA:
- Prevent P2PDMA as well as CPU access to non-mappable BARs, e.g.,
s390 ISM BARs (Matt Evans)
- Add Intel QAT, DSA, IAA devices to whitelist (Lukas Wunner)
Endpoint framework:
- Add endpoint controller APIs for use by function drivers to
discover auxiliary blocks like DMA engines (Koichiro Den)
- Remember DesignWare eDMA engine base/size and expose them via the
EPC aux-resource API (Koichiro Den)
- Add endpoint embedded doorbell fallback, used if MSI allocation
fails (Koichiro Den)
- Validate BAR index and remove dead BAR read in endpoint doorbell
test (Carlos Bilbao)
- Unwind MSI/MSI-X vectors if NTB initialization fails part-way
through (Koichiro Den)
- Cache sleepable pci_irq_vector() value at ISR setup to avoid
calling it from hardirq context (Koichiro Den)
- Call sleepable pci_epc_raise_irq() from a work item instead of
atomic context, e.g., when setting bits in NTB peer doorbells in
the ntb_peer_db_set() path (Koichiro Den)
- Report 0-based vNTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Prevent configfs writes to vNTB db_count and other values that are
already in use after EPC attach (Koichiro Den)
- Account for vNTB db_valid reserved slots (link event 0 and
historically skipped slot 1) so they don't appear as valid
doorbells (Koichiro Den)
- Implement vNTB .db_vector_count()/mask() for doorbells so clients
can use multiple vectors and avoid thundering herds (Koichiro Den)
- Report 0-based NTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Fix doorbell bitmask and IRQ vector handling to clear only
specified bits, use the correct vector for non-contiguous Linux IRQ
numbers, and validate incoming vectors (Koichiro Den)
- Implement NTB .db_vector_count()/mask() for doorbells so clients
can use multiple vectors (Koichiro Den)
Native PCIe controller infrastructure:
- Add pci_host_common_link_train_delay() for the mandatory delay
after > 5GT/s Link training completes and use it for cadence HPA,
j721e, LGA; dwc; aardvark, mediatek-gen3, rzg3s (Hans Zhang)
- Protect root bus removal with rescan lock in altera, brcmstb,
cadence, dwc, iproc, mediatek, plda, rockchip to prevent
use-after-free or crashes when racing with sysfs rescan or hotplug
(Hans Zhang)
- Add pci_host_common_parse_ports() for use by any native driver to
parse Root Port properties (per-Link features like width, speed,
PHY, power and reset control, etc should be described in Root Port
stanzas, not the host bridge; currently only reset GPIOs
implemented) (Sherry Sun)
New native PCIe controller drivers:
- Add DT binding and driver for UltraRISC DP1000 PCIe controller
(Xincheng Zhang, Jia Wang)
Altera PCIe controller driver:
- Do not dispose of the parent IRQ mapping, which belongs to the
parent interrupt controller (Mahesh Vaidya)
- Fix chained IRQ handler ordering issue and resource leaks on probe
failure (Mahesh Vaidya)
AMD MDB PCIe controller driver:
- Assert PERST# on shutdown so any connected Endpoints are held in
reset during shutdown (Sai Krishna Musham)
Amlogic Meson PCIe controller driver:
- Propagate devm_add_action_or_reset() failure to fix probe error
path (Shuvam Pandey)
- Add .remove() callback to deinitialize the host bridge and power
off the PHY (Shuvam Pandey)
Broadcom iProc PCIe controller driver:
- Restore .map_irq() assignment; its removal broke INTx on the iproc
platform bus driver (Mark Tomlinson)
Broadcom STB PCIe controller driver:
- No change, but products using certain WiFi devices may be affected
by removal of CONFIG_PCIE_BUS_* (see above)
Freescale i.MX6 PCIe controller driver:
- Move IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling into the core reset
functions (Richard Zhu)
- Assert PERST# before enabling regulators to ensure that even if
power is enabled, endpoint stays inactive until REFCLK is stable
(Sherry Sun)
- Parse reset properties in Root Port nodes (falling back to host
bridge) to help support Key E connectors and the pwrctrl framework
(Sherry Sun)
- Configure i.MX95 REF_USE_PAD before PHY reset (Richard Zhu)
- Assert i.MX95 ref_clk_en after reference clock stabilizes (Richard
Zhu)
- Integrate new pwrctrl API for DTs with Root Port-level power
supplies (Sherry Sun)
Intel Gateway PCIe controller driver:
- Enable clock before PHY init for correct ordering (Florian Eckert)
- Add .start_link() callback so the driver works again (Florian
Eckert)
- Stop overwriting the ATU base address discovered by
dw_pcie_get_resources() (Florian Eckert)
- Add DT 'atu' region since this is hardware-specific, and fall back
to driver default if lacking (Florian Eckert)
Loongson PCIe controller driver:
- Ignore downstream devices only on internal bridges to avoid
Loongson hardware issue (Rong Zhang)
- Quirk old Loongson-3C6000 bridges that advertise incorrect
supported link speeds (Ziyao Li)
Marvell MVEBU PCIe controller driver:
- Use fixed-width interrupt masks to avoid truncation in 64-bit
builds (Rosen Penev)
MediaTek PCIe controller driver:
- Use FIELD_PREP() to fix incorrect operator precedence in
PCIE_FTS_NUM_L0 (Li RongQing)
- Fix IRQ domain leak when port fails to enable (Manivannan
Sadhasivam)
- Use actual physical address for MSI message address instead of
virt_to_phys() (Manivannan Sadhasivam)
- Add EcoNet EN7528 to DT binding (Caleb James DeLisle)
MediaTek PCIe Gen3 controller driver:
- Deassert PCIE_PHY_RSTB so REFCLK is stable for at least 100ms
(PCIE_T_PVPERL_MS) before deasserting PERST# (Jian Yang)
- Add .shutdown() to assert PERST# before powering down device (Jian
Yang)
- Do full device power down on removal, including asserting PERST#,
when removing driver (Chen-Yu Tsai)
- Fix a 'failed to create pwrctrl devices' error message that was
inadvertently skipped (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Program the DesignWare PORT_AFR L1 entrance latency based on the
'aspm-l1-entry-delay-ns' DT property (Manikanta Maddireddy)
Qualcomm PCIe controller driver:
- Add Eliza SoC compatible in DT binding (Krishna Chaitanya Chundru)
- Set max OPP during resume so DBI register accesses don't fail with
NoC errors (Qiang Yu)
- Add pci_host_common_d3cold_possible() to determine whether
downstream devices are already in D3hot and wakeup-enabled devices
are capable of generating PME from D3cold (Krishna Chaitanya
Chundru)
- Add .get_ltssm() callback to get the LTSSM status without DBI,
since DBI may be inaccessible after PME_Turn_Off (Krishna Chaitanya
Chundru)
- Power down PHY via PARF_PHY_CTRL before disabling rails/clocks to
avoid power leakage (Krishna Chaitanya Chundru)
- Decide whether suspend should put the link in L2 and power down
using pci_host_common_d3cold_possible() instead of checking whether
ASPM L1 is enabled (Krishna Chaitanya Chundru)
- Add qcom D3cold support to tear down interconnect bandwidth and OPP
votes (Krishna Chaitanya Chundru)
- Handle unsupported mixed PERST#/PHY DT configurations, e.g., PHY in
RP node while PERST# is in the RC node, but warn about the DT issue
(Qiang Yu)
- Program T_POWER_ON based on DT 't-power-on-us' property in case
hardware advertises incorrect values (Krishna Chaitanya Chundru)
- Disable ASPM L0s for SA8775P (Shawn Guo)
- Initialize DWC MSI lock for firmware-managed ECAM hosts, which
don't use the dw_pcie_host_init() path that initializes the lock
(Yadu M G)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/V2N DT support (Lad Prabhakar)
SOPHGO PCIe controller driver:
- Add 'dma-coherent' DT property for sg2042-pcie driver (Han Gao)
Synopsys DesignWare PCIe controller driver:
- Apply ECRC TLP Digest workaround for all DesignWare cores prior to
5.10a, not just 4.90a and 5.00a (Manikanta Maddireddy)
- Use common struct dw_pcie 'mode' rather than duplicating it in
artpec6, dra7xx, dwc-pcie, and keembay driver structs (Hans Zhang)
- Use DEFINE_SHOW_ATTRIBUTE for ltssm_status debugfs to reduce
boilerplate and fix a seq_file memory leak by including a
.release() callback (Hans Zhang)
- Fix a signedness bug in fault injection test code (Dan Carpenter)
- Avoid NULL pointer dereference when tearing down debugfs for
controller that lacks RAS DES capability (Shuvam Pandey)
MicroSemi Switchtec management driver:
- Add Gen6 Device IDs (Ben Reed)
Miscellaneous:
- Remove unused gpio.h include from amd-mdb, designware-plat, fu740,
visconti drivers (Andy Shevchenko)
- Fix typos in documentation (josh ziegler)
- Use FIELD_MODIFY() instead of open-coding it (Hans Zhang)"
* tag 'pci-v7.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (168 commits)
PCI/sysfs: Use kstrtobool() to parse the ROM attribute input
PCI/sysfs: Limit BAR resize attribute scope to platforms with PCI mmap
PCI/sysfs: Remove pci_create_legacy_files() and pci_sysfs_init()
PCI/sysfs: Convert legacy I/O and memory attributes to static definitions
PCI/sysfs: Add __weak pci_legacy_has_sparse() helper
alpha/PCI: Compute legacy size in pci_mmap_legacy_page_range()
PCI: Add macros for legacy I/O and memory address space sizes
PCI/sysfs: Remove pci_{create,remove}_sysfs_dev_files()
alpha/PCI: Convert resource files to static attributes
alpha/PCI: Add static PCI resource attribute macros
alpha/PCI: Remove WARN from __pci_mmap_fits() and __legacy_mmap_fits()
alpha/PCI: Fix __pci_mmap_fits() overflow for zero-length BARs
alpha/PCI: Use PCI resource accessor macros
alpha/PCI: Use BAR index in sysfs attr->private instead of resource pointer
alpha/PCI: Add security_locked_down() check to pci_mmap_resource()
PCI/sysfs: Limit pci_sysfs_init() late_initcall compile scope
PCI/sysfs: Add stubs for pci_{create,remove}_sysfs_dev_files()
PCI/sysfs: Warn about BAR resize failure in __resource_resize_store()
PCI/sysfs: Convert PCI resource files to static attributes
PCI/proc: Fix race between pci_proc_init() and pci_bus_add_device()
...
|
|
Currently, legacy_io and legacy_mem are dynamically allocated and created
by pci_create_legacy_files(), with pci_adjust_legacy_attr() updating the
attributes at runtime on Alpha to rename them and shift the size for sparse
addressing.
Convert to four static const attributes (legacy_io, legacy_io_sparse,
legacy_mem, legacy_mem_sparse) with .is_bin_visible() callbacks that use
pci_legacy_has_sparse() to select the appropriate variant per bus. The
sizes are compile-time constants and .size is set directly on each
attribute.
Register the groups in pcibus_groups[] under a HAVE_PCI_LEGACY guard so the
driver model handles creation and removal automatically.
Stub out pci_create_legacy_files() and pci_remove_legacy_files() as the
dynamic creation is no longer needed. Remove the __weak
pci_adjust_legacy_attr(), Alpha's override, and its declaration from both
Alpha and PowerPC asm/pci.h headers.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-23-kwilczynski@kernel.org
|
|
Currently, Alpha's sparse/dense legacy attribute handling is done via
pci_adjust_legacy_attr(), which updates dynamically allocated attributes at
runtime. The upcoming conversion to static attributes needs a way to
determine sparse support at visibility check time.
Add a __weak pci_legacy_has_sparse() that returns false by default. Alpha
overrides it to check has_sparse() on the bus host controller.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-22-kwilczynski@kernel.org
|
|
Currently, pci_mmap_legacy_page_range() reads the legacy resource size from
bus->legacy_mem->size or bus->legacy_io->size. This couples the mmap
bounds check to the struct pci_bus fields that will be removed when legacy
attributes are converted to static definitions.
Compute the size directly using PCI_LEGACY_MEM_SIZE (0x100000) and
PCI_LEGACY_IO_SIZE (0xffff) macros, and shift by 5 bits for sparse systems.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://patch.msgid.link/20260508043543.217179-21-kwilczynski@kernel.org
|
|
Previously, Alpha's PCI resource files (resourceN, resourceN_sparse,
resourceN_dense) were dynamically created by pci_create_resource_files(),
which overrides the generic __weak implementation. The previous code
allocated bin_attributes at runtime and managed them via the res_attr[] and
res_attr_wc[] fields in struct pci_dev.
Convert to static const attributes with three attribute groups (plain,
sparse, dense), each with an .is_bin_visible() callback that checks
resource length, has_sparse(), and sparse_mem_mmap_fits(). A .bin_size()
callback provides the resource size to the kernfs node, with the sparse
variant shifting by 5 bits for byte-level addressing.
Register the groups via ARCH_PCI_DEV_GROUPS so the driver model handles
creation and removal automatically.
Use the new pci_resource_is_mem() helper for the type check, replacing the
open-coded bitwise flag test.
Finally, remove pci_create_resource_files(), pci_remove_resource_files(),
pci_create_attr(), and pci_create_one_attr() which are no longer needed.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://patch.msgid.link/20260508043543.217179-18-kwilczynski@kernel.org
|
|
Add macros for declaring static binary attributes for Alpha's PCI resource
files:
- pci_dev_resource_attr(), for dense/BWX systems (mmap dense)
- pci_dev_resource_sparse_attr(), for sparse systems (mmap sparse)
- pci_dev_resource_dense_attr(), for dense companion files (mmap dense)
Each macro creates a const bin_attribute with the BAR index stored in the
.private property and the appropriate .mmap() callback.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://patch.msgid.link/20260508043543.217179-17-kwilczynski@kernel.org
|
|
Remove the WARN() that fires when userspace attempts to mmap beyond the BAR
bounds. The check still returns 0 to reject the mapping, but the warning
is excessive for normal operation.
A similar warning was removed from the PCI core in the commit 3b519e4ea618
("PCI: fix size checks for mmap() on /proc/bus/pci files").
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: squash https://lore.kernel.org/all/20260508045824.GA3160093@rocinante]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://patch.msgid.link/20260508043543.217179-16-kwilczynski@kernel.org
|
|
Currently, __pci_mmap_fits() computes the BAR size using
"pci_resource_len() - 1", which wraps to a large value when the BAR length
is zero, causing the bounds check to incorrectly succeed.
Add an early return for empty resources.
Fixes: 10a0ef39fbd1 ("PCI/alpha: pci sysfs resources")
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://patch.msgid.link/20260508043543.217179-15-kwilczynski@kernel.org
|
|
Replace direct pdev->resource[] accesses with pci_resource_n(), and
open-coded res->flags type checks with pci_resource_is_mem() and
pci_resource_start() helpers.
While at it, move the pci_resource_n() call directly into
pcibios_resource_to_bus() and drop the local struct resource pointer.
No functional changes intended.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://patch.msgid.link/20260508043543.217179-14-kwilczynski@kernel.org
|
|
Currently, Alpha's pci_create_one_attr() stores a resource pointer in
attr->private, and pci_mmap_resource() loops through all BARs to find
the matching index.
Store the BAR index directly in attr->private and retrieve the resource via
pci_resource_n(). This eliminates the loop and aligns with the convention
used by the generic PCI sysfs code.
The PCI core change was first added in the commit dca40b186b75 ("PCI: Use
BAR index in sysfs attr->private instead of resource pointer").
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://patch.msgid.link/20260508043543.217179-13-kwilczynski@kernel.org
|
|
Currently, Alpha's pci_mmap_resource() does not check
security_locked_down(LOCKDOWN_PCI_ACCESS) before allowing userspace to mmap
PCI BARs.
The generic version has had this check since commit eb627e17727e ("PCI:
Lock down BAR access when the kernel is locked down") to prevent DMA
attacks when the kernel is locked down.
Add the same check to Alpha's pci_mmap_resource().
Fixes: eb627e17727e ("PCI: Lock down BAR access when the kernel is locked down")
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://patch.msgid.link/20260508043543.217179-12-kwilczynski@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Beside the removal of the Hercules monochrome ISA graphics driver and
the corresponding text console driver, there is just the typical
maintanance with smaller driver fixes and cleanups:
Removal of drivers:
- Hercules monochrome ISA graphics adapter driver (Ethan Nelson-Moore)
- Hercules mdacon console driver (Ethan Nelson-Moore)
Changes affecting many drivers at once:
- possible memory leak fixes in various drivers (Abdun Nihaal)
- many conversions to use strscpy() (David Laight)
- Use named initializers in drivers (Uwe Kleine-König)
Code fixes:
- fbcon: don't suspend/resume when vc is graphics mode (Lu Yao)
- modedb: fix a possible UAF in fb_find_mode() (Tuo Li)
- modedb: Fix entry for 1920x1080-60 mode (Steffen Persvold)
- arm: Export acorndata_8x8 font symbol for bootloader (Helge Deller)
- omap2: fix use-after-free in omapfb_mmap (Hongling Zeng)
Cleanups:
- pxa168fb: use devm_ioremap_resource() (Alberto Arostegui)
- provice helpers for fb_set_var() and fb_blank() and fbcon updates
(Thomas Zimmermann)
- fbcon: Use correct type for vc_resize() return value (Jiacheng Yu)
- chipsfb: add missing MODULE_DESCRIPTION() macro (Rahman Mahmutović)
- sunxvr2500: replace printk with device-aware logging functions
(Rahman Mahmutović)
- sm712: Fix operator precedence in big_swap macro (Li RongQing)
- imxfb: Use of_device_get_match_data() (Rosen Penev)
- atmel_lcdfb: Use of_device_get_match_data() (Rosen Penev)
Documentation fixes:
- grvga: Fix CLUT register address offset in comment (Eduardo Silva)
- omap/dss: Fix stale modedb.c path (Costa Shulyupin)
- correct CONFIG_FB_TILEBLITTING macro name in #endif comment (Ethan
Nelson-Moore)"
* tag 'fbdev-for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (43 commits)
fbdev: modedb: Fix misaligned fields in the 1920x1080-60 mode
fbdev: modedb: fix a possible UAF in fb_find_mode()
fbdev: s3fb: Use strscpy() to copy strings into arrays
fbdev: sm501fb: Fix buffer errors in OF binding code
fbcon: correct CONFIG_FB_TILEBLITTING macro name in #endif comment
fbdev/arm: Export acorndata_8x8 font symbol for bootloader
fbdev: mmpfb: Use strscpy() to copy device name
fbdev: sisfb: Replace strlen() strcpy() pair with strscpy()
fbdev: rivafb: Use strscpy() to copy device name
fbdev: cyber2000fb: Use strscpy() to copy device name
fbdev: atmel_lcdfb: Use strscpy() to copy device name
fbdev: Do not export fbcon from fbdev
fbdev: Wrap fbcon updates from vga-switcheroo in helper
fbdev: Wrap user-invoked calls to fb_blank() in helper
fbdev: Wrap user-invoked calls to fb_set_var() in helper
fbdev: omap2: fix use-after-free in omapfb_mmap
docs: omap/dss: Fix stale modedb.c path
fbdev: pxa168fb: use devm_ioremap_resource() for MMIO
fbdev: grvga: Fix CLUT register address offset in comment
fbdev: sunxvr2500: replace printk with device-aware logging functions
...
|
|
Quite some architectures have four character wide acronyms for architecture
specific interrupts like IPI, NMI, etc.
The default precision of printing the Linux device interrupt numbers is
three, which causes quite some code to play games with adding or omitting
space after the acronym and the colon in order to keep the per CPU numbers
properly aligned.
Increase the default number precision to four in the core code and get rid
of the space games all over the place. At the same time align all
architecture specific descriptor texts left so that they show up in the
same column as the interrupt chip names, which makes the output more
uniform accross architectures. Fix up the GDB script to this new scheme as
well.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260517194931.839482411@kernel.org
|
|
The mdacon driver supports using ISA MDA or Hercules-compatible display
adapters as a secondary text console. This was commonly used in the
1990s and earlier for debugging software which took over the primary
display. It is highly unlikely anyone is doing so nowadays because
serial consoles and much better methods of debugging exist.
The driver is not enabled by any defconfig, nor any of the
dozens of distro configs collected at [1]. It has been relegated to VTs
13-16 since commit 0b9cf3aa6b1e ("mdacon messing up default vc's - set
default to vc13-16 again") in Linux 2.6.27 (and before Linux 2.5.53 -
see the link in the message of the above commit). The change in 2.6.27
was done because it was incorrectly detecting non-MDA adapters as MDA
and taking over all VTs, rendering them unusable.
Furthermore, vgacon supports using MDA/Hercules-compatible adapters as
the primary text console, so any systems with only one of these
adapters were already using vgacon and will not experience any loss in
functionality from the removal of this driver.
Given all of these factors, the mdacon driver is likely entirely
unused. Remove it.
[1] https://github.com/nyrahul/linux-kernel-configs/tree/f0bee86a135a0406ea427855f52702dd00d770f9
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lindholm/alpha
Pull alpha updates from Magnus Lindholm:
"One fix to silence pgprot_modify() compiler warnings, and one patch
adding SECCOMP/SECCOMP_FILTER support together with the syscall and
ptrace fixes needed for it"
* tag 'alpha-for-v7.1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/lindholm/alpha:
alpha: Define pgprot_modify to silence tautological comparison warnings
alpha: add support for SECCOMP and SECCOMP_FILTER
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Allow TLP Processing Hints to be enabled for RCiEPs (George Abraham
P)
- Enable AtomicOps only if we know the Root Port supports them (Gerd
Bayer)
- Don't enable AtomicOps for RCiEPs since none of them need Atomic
Ops and we can't tell whether the Root Complex would support them
(Gerd Bayer)
- Leave Precision Time Measurement disabled until a driver enables it
to avoid PCIe errors (Mika Westerberg)
- Make pci_set_vga_state() fail if bridge doesn't support VGA
routing, i.e., PCI_BRIDGE_CTL_VGA is not writable, and return
errors to vga_get() callers including userspace via
/dev/vga_arbiter (Simon Richter)
- Validate max-link-speed from DT in j721e, brcmstb, mediatek-gen3,
rzg3s drivers (where the actual controller constraints are known),
and remove validation from the generic OF DT accessor (Hans Zhang)
- Remove pc110pad driver (no longer useful after 486 CPU support
removed) and no_pci_devices() (pc110pad was the last user) (Dmitry
Torokhov, Heiner Kallweit)
Resource management:
- Prevent assigning space to unimplemented bridge windows; previously
we mistakenly assumed prefetchable window existed and assigned
space and put a BAR there (Ahmed Naseef)
- Avoid shrinking bridge windows to fit in the initial Root Port
window; fixes one problem with devices with large BARs connected
via switches, e.g., Thunderbolt (Ilpo Järvinen)
- Pass full extent of empty space, not just the aligned space, to
resource_alignf callback so free space before the requested
alignment can be used (Ilpo Järvinen)
- Place small resources before larger ones for better utilization of
address space (Ilpo Järvinen)
- Fix alignment calculation for resource size larger than align,
e.g., bridge windows larger than the 1MB required alignment (Ilpo
Järvinen)
Reset:
- Update slot handling so all ARI functions are treated as being in
the same slot. They're all reset by Secondary Bus Reset, but
previously drivers of ARI functions that appeared to be on a
non-zero device weren't notified and fatal hardware errors could
result (Keith Busch)
- Make sysfs reset_subordinate hotplug safe to avoid spurious hotplug
events (Keith Busch)
- Hide Secondary Bus Reset ('bus') from sysfs reset_methods if masked
by CXL because it has no effect (Vidya Sagar)
- Avoid FLR for AMD NPU device, where it causes the device to hang
(Lizhi Hou)
Error handling:
- Clear only error bits in PCIe Device Status to avoid accidentally
clearing Emergency Power Reduction Detected (Shuai Xue)
- Check for AER errors even in devices without drivers (Lukas Wunner)
- Initialize ratelimit info so DPC and EDR paths log AER error
information (Kuppuswamy Sathyanarayanan)
Power control:
- Add UPD720201/UPD720202 USB 3.0 xHCI Host Controller .compatible so
generic pwrctrl driver can control it (Neil Armstrong)
Hotplug:
- Set LED_HW_PLUGGABLE for NPEM hotplug-capable ports so LED core
doesn't complain when setting brightness fails because the endpoint
is gone (Richard Cheng)
Peer-to-peer DMA:
- Allow wildcards in list of host bridges that support peer-to-peer
DMA between hierarchy domains and add all Google SoCs (Jacob
Moroni)
Endpoint framework:
- Advertise dynamic inbound mapping support in pci-epf-test and
update host pci_endpoint_test to skip doorbell testing if not
advertised by endpoint (Koichiro Den)
- Return 0, not remaining timeout, when MHI eDMA ops complete so
mhi_ep_ring_add_element() doesn't interpret non-zero as failure
(Daniel Hodges)
- Remove vntb and ntb duplicate resource teardown that leads to oops
when .allow_link() fails or .drop_link() is called (Koichiro Den)
- Disable vntb delayed work before clearing BAR mappings and
doorbells to avoid oops caused by doing the work after resources
have been torn down (Koichiro Den)
- Add a way to describe reserved subregions within BARs, e.g.,
platform-owned fixed register windows, and use it for the RK3588
BAR4 DMA ctrl window (Koichiro Den)
- Add BAR_DISABLED for BARs that will never be available to an EPF
driver, and change some BAR_RESERVED annotations to BAR_DISABLED
(Niklas Cassel)
- Add NTB .get_dma_dev() callback for cases where DMA API requires a
different device, e.g., vNTB devices (Koichiro Den)
- Add reserved region types for MSI-X Table and PBA so Endpoint
controllers can them as describe hardware-owned regions in a
BAR_RESERVED BAR (Manikanta Maddireddy)
- Make Tegra194/234 BAR0 programmable and remove 1MB size limit
(Manikanta Maddireddy)
- Expose Tegra BAR2 (MSI-X) and BAR4 (DMA) as 64-bit BAR_RESERVED
(Manikanta Maddireddy)
- Add Tegra194 and Tegra234 device table entries to pci_endpoint_test
(Manikanta Maddireddy)
- Skip the BAR subrange selftest if there are not enough inbound
window resources to run the test (Christian Bruel)
New native PCIe controller drivers:
- Add DT binding and driver for Andes QiLai SoC PCIe host controller
(Randolph Lin)
- Add DT binding and driver for ESWIN PCIe Root Complex (Senchuan
Zhang)
Baikal T-1 PCIe controller driver:
- Remove driver since it never quite became usable (Andy Shevchenko)
Cadence PCIe controller driver:
- Implement byte/word config reads with dword (32-bit) reads because
some Cadence controllers don't support sub-dword accesses (Aksh
Garg)
CIX Sky1 PCIe controller driver:
- Add 'power-domains' to DT binding for SCMI power domain (Gary Yang)
Freescale i.MX6 PCIe controller driver:
- Add i.MX94 and i.MX943 to fsl,imx6q-pcie-ep DT binding (Richard
Zhu)
- Delay instead of polling for L2/L3 Ready after PME_Turn_off when
suspending i.MX6SX because LTSSM registers are inaccessible
(Richard Zhu)
- Separate PERST# assertion (for resetting endpoints) from core reset
(for resetting the RC itself) to prepare for new DTs with PERST#
GPIO in per-Root Port nodes (Sherry Sun)
- Retain Root Port MSI capability on i.MX7D, i.MX8MM, and i.MX8MQ so
MSI from downstream devices will work (Richard Zhu)
- Fix i.MX95 reference clock source selection when internal refclk is
used (Franz Schnyder)
Freescale Layerscape PCIe controller driver:
- Allow building as a removable module (Sascha Hauer)
MediaTek PCIe Gen3 controller driver:
- Use dev_err_probe() to simplify error paths and make deferred probe
messages visible in /sys/kernel/debug/devices_deferred (Chen-Yu
Tsai)
- Power off device if setup fails (Chen-Yu Tsai)
- Integrate new pwrctrl API to enable power control for WiFi/BT
adapters on mainboard or in PCIe or M.2 slots (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Poll less aggressively and non-atomically for PME_TO_Ack during
transition to L2 (Vidya Sagar)
- Disable LTSSM after transition to Detect on surprise link down to
stop toggling between Polling and Detect (Manikanta Maddireddy)
- Don't force the device into the D0 state before L2 when suspending
or shutting down the controller (Vidya Sagar)
- Disable PERST# IRQ only in Endpoint mode because it's not
registered in Root Port mode (Manikanta Maddireddy)
- Handle 'nvidia,refclk-select' as optional (Vidya Sagar)
- Disable direct speed change in Endpoint mode so link speed change
is controlled by the host (Vidya Sagar)
- Set LTR values before link up to avoid bogus LTR messages with 0
latency (Vidya Sagar)
- Allow system suspend when the Endpoint link is down (Vidya Sagar)
- Use DWC IP core version, not Tegra custom values, to avoid DWC core
version check warnings (Manikanta Maddireddy)
- Apply ECRC workaround to devices based on DesignWare 5.00a as well
as 4.90a (Manikanta Maddireddy)
- Disable PM Substate L1.2 in Endpoint mode to work around Tegra234
erratum (Vidya Sagar)
- Delay post-PERST# cleanup until core is powered on to avoid CBB
timeout (Manikanta Maddireddy)
- Assert CLKREQ# so switches that forward it to their downstream side
can bring up those links successfully (Vidya Sagar)
- Calibrate pipe to UPHY for Endpoint mode to reset stale PLL state
from any previous bad link state (Vidya Sagar)
- Remove IRQF_ONESHOT flag from Endpoint interrupt registration so
DMA driver and Endpoint controller driver can share the interrupt
line (Vidya Sagar)
- Enable DMA interrupt to support DMA in both Root Port and Endpoint
modes (Vidya Sagar)
- Enable hardware link retraining after link goes down in Endpoint
mode (Vidya Sagar)
- Add DT binding and driver support for core clock monitoring (Vidya
Sagar)
Qualcomm PCIe controller driver:
- Advertise 'Hot-Plug Capable' and set 'No Command Completed Support'
since Qcom Root Ports support hotplug events like DL_Up/Down and
can accept writes to Slot Control without delays between writes
(Krishna Chaitanya Chundru)
Renesas R-Car PCIe controller driver:
- Mark Endpoint BAR0 and BAR2 as Resizable (Koichiro Den)
- Reduce EPC BAR alignment requirement to 4K (Koichiro Den)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/G3E to DT binding and to driver (John Madieu)
- Assert (not deassert) resets in probe error path (John Madieu)
- Assert resets in suspend path in reverse order they were deasserted
during probe (John Madieu)
- Rework inbound window algorithm to prevent mapping more than
intended region and enforce alignment on size, to prepare for
RZ/G3E support (John Madieu)
Rockchip DesignWare PCIe controller driver:
- Add tracepoints for PCIe controller LTSSM transitions and link rate
changes (Shawn Lin)
- Trace LTSSM events collected by the dw-rockchip debug FIFO (Shawn
Lin)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2042 PCIe Root Ports that
advertise support for them (Yao Zi)
Synopsys DesignWare PCIe controller driver:
- Continue with system suspend even if an Endpoint doesn't respond
with PME_TO_Ack message (Manivannan Sadhasivam)
- Set Endpoint MSI-X Table Size in the correct function of a
multi-function device when configuring MSI-X, not in Function 0
(Aksh Garg)
- Set Max Link Width and Max Link Speed for all functions of a
multi-function device, not just Function 0 (Aksh Garg)
- Expose PCIe event counters in groups 5-7 in debugfs (Hans Zhang)
Miscellaneous:
- Warn only once about invalid ACS kernel parameter format (Richard
Cheng)
- Suppress FW_BUG warning when writing sysfs 'numa_node' with the
current value (Li RongQing)
- Drop redundant 'depends on PCI' from Kconfig (Julian Braha)"
* tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (165 commits)
PCI/P2PDMA: Add Google SoCs to the P2P DMA host bridge list
PCI/P2PDMA: Allow wildcard Device IDs in host bridge list
PCI: sg2042: Avoid L0s and L1 on Sophgo 2042 PCIe Root Ports
PCI: cadence: Add flags for disabling ASPM capability for broken Root Ports
PCI: tegra194: Add core monitor clock support
dt-bindings: PCI: tegra194: Add monitor clock support
PCI: tegra194: Enable hardware hot reset mode in Endpoint mode
PCI: tegra194: Enable DMA interrupt
PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration
PCI: tegra194: Calibrate pipe to UPHY for Endpoint mode
PCI: tegra194: Assert CLKREQ# explicitly by default
PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
PCI: tegra194: Disable L1.2 capability of Tegra234 EP
PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well
PCI: tegra194: Use DWC IP core version
PCI: tegra194: Free up Endpoint resources during remove()
PCI: tegra194: Allow system suspend when the Endpoint link is not up
PCI: tegra194: Set LTR message request before PCIe link up in Endpoint mode
PCI: tegra194: Disable direct speed change for Endpoint mode
PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select"
...
|
|
Add SECCOMP and SECCOMP_FILTER support to the Alpha architecture and fix
syscall entry and ptrace issues uncovered by the seccomp-bpf selftests.
The syscall entry path is reworked to consistently track syscall state
using r0, r1 and r2:
- r1 holds the active syscall number
- r2 preserves the original syscall number for restart
- r0 carries the return value, with r19 (a3) indicating success/error
This allows syscall restarts to be permitted only for valid ERESTART*
return codes and prevents kernel-internal restart values from leaking to
userspace. The syscall tracing error marker is corrected to use the saved
syscall number slot, matching the Alpha ABI.
Additionally, implement minimal PTRACE_GETREGSET and PTRACE_SETREGSET
support for NT_PRSTATUS, exporting struct pt_regs directly. This fixes
ptrace-based seccomp tests that previously failed with -EIO.
With these changes, seccomp-bpf and ptrace syscall tests pass reliably on
Alpha.
Tested-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://lore.kernel.org/r/20260409171439.8759-2-linmag7@gmail.com
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
|
|
__find_resource_space() calculates the full extent of empty space but only
passes the aligned space to resource_alignf callback. In some situations,
the callback may choose take advantage of the free space before the
requested alignment.
Pass the full extent of the calculated empty space to resource_alignf
callback as an additional parameter.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Xifer <xiferdev@gmail.com>
Link: https://patch.msgid.link/20260324165633.4583-3-ilpo.jarvinen@linux.intel.com
|
|
Commit 3e86e4d74c04 ("kbuild: keep .modinfo section in
vmlinux.unstripped") added .modinfo to ELF_DETAILS while removing it
from COMMON_DISCARDS, as it was needed in vmlinux.unstripped and
ELF_DETAILS was present in all architecture specific vmlinux linker
scripts. While this shuffle is fine for vmlinux, ELF_DETAILS and
COMMON_DISCARDS may be used by other linker scripts, such as the s390
and x86 compressed boot images, which may not expect to have a .modinfo
section. In certain circumstances, this could result in a bootloader
failing to load the compressed kernel [1].
Commit ddc6cbef3ef1 ("s390/boot/vmlinux.lds.S: Ensure bzImage ends with
SecureBoot trailer") recently addressed this for the s390 bzImage but
the same bug remains for arm, parisc, and x86. The presence of .modinfo
in the x86 bzImage was the root cause of the issue worked around with
commit d50f21091358 ("kbuild: align modinfo section for Secureboot
Authenticode EDK2 compat"). misc.c in arch/x86/boot/compressed includes
lib/decompress_unzstd.c, which in turn includes lib/xxhash.c and its
MODULE_LICENSE / MODULE_DESCRIPTION macros due to the STATIC definition.
Split .modinfo out from ELF_DETAILS into its own macro and handle it in
all vmlinux linker scripts. Discard .modinfo in the places where it was
previously being discarded from being in COMMON_DISCARDS, as it has
never been necessary in those uses.
Cc: stable@vger.kernel.org
Fixes: 3e86e4d74c04 ("kbuild: keep .modinfo section in vmlinux.unstripped")
Reported-by: Ed W <lists@wildgooses.com>
Closes: https://lore.kernel.org/587f25e0-a80e-46a5-9f01-87cb40cfa377@wildgooses.com/ [1]
Tested-by: Ed W <lists@wildgooses.com> # x86_64
Link: https://patch.msgid.link/20260225-separate-modinfo-from-elf-details-v1-1-387ced6baf4b@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "powerpc/64s: do not re-activate batched TLB flush" makes
arch_{enter|leave}_lazy_mmu_mode() nest properly (Alexander Gordeev)
It adds a generic enter/leave layer and switches architectures to use
it. Various hacks were removed in the process.
- "zram: introduce compressed data writeback" implements data
compression for zram writeback (Richard Chang and Sergey Senozhatsky)
- "mm: folio_zero_user: clear page ranges" adds clearing of contiguous
page ranges for hugepages. Large improvements during demand faulting
are demonstrated (David Hildenbrand)
- "memcg cleanups" tidies up some memcg code (Chen Ridong)
- "mm/damon: introduce {,max_}nr_snapshots and tracepoint for damos
stats" improves DAMOS stat's provided information, deterministic
control, and readability (SeongJae Park)
- "selftests/mm: hugetlb cgroup charging: robustness fixes" fixes a few
issues in the hugetlb cgroup charging selftests (Li Wang)
- "Fix va_high_addr_switch.sh test failure - again" addresses several
issues in the va_high_addr_switch test (Chunyu Hu)
- "mm/damon/tests/core-kunit: extend existing test scenarios" improves
the KUnit test coverage for DAMON (Shu Anzai)
- "mm/khugepaged: fix dirty page handling for MADV_COLLAPSE" fixes a
glitch in khugepaged which was causing madvise(MADV_COLLAPSE) to
transiently return -EAGAIN (Shivank Garg)
- "arch, mm: consolidate hugetlb early reservation" reworks and
consolidates a pile of straggly code related to reservation of
hugetlb memory from bootmem and creation of CMA areas for hugetlb
(Mike Rapoport)
- "mm: clean up anon_vma implementation" cleans up the anon_vma
implementation in various ways (Lorenzo Stoakes)
- "tweaks for __alloc_pages_slowpath()" does a little streamlining of
the page allocator's slowpath code (Vlastimil Babka)
- "memcg: separate private and public ID namespaces" cleans up the
memcg ID code and prevents the internal-only private IDs from being
exposed to userspace (Shakeel Butt)
- "mm: hugetlb: allocate frozen gigantic folio" cleans up the
allocation of frozen folios and avoids some atomic refcount
operations (Kefeng Wang)
- "mm/damon: advance DAMOS-based LRU sorting" improves DAMOS's movement
of memory betewwn the active and inactive LRUs and adds auto-tuning
of the ratio-based quotas and of monitoring intervals (SeongJae Park)
- "Support page table check on PowerPC" makes
CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc (Andrew Donnellan)
- "nodemask: align nodes_and{,not} with underlying bitmap ops" makes
nodes_and() and nodes_andnot() propagate the return values from the
underlying bit operations, enabling some cleanup in calling code
(Yury Norov)
- "mm/damon: hide kdamond and kdamond_lock from API callers" cleans up
some DAMON internal interfaces (SeongJae Park)
- "mm/khugepaged: cleanups and scan limit fix" does some cleanup work
in khupaged and fixes a scan limit accounting issue (Shivank Garg)
- "mm: balloon infrastructure cleanups" goes to town on the balloon
infrastructure and its page migration function. Mainly cleanups, also
some locking simplification (David Hildenbrand)
- "mm/vmscan: add tracepoint and reason for kswapd_failures reset" adds
additional tracepoints to the page reclaim code (Jiayuan Chen)
- "Replace wq users and add WQ_PERCPU to alloc_workqueue() users" is
part of Marco's kernel-wide migration from the legacy workqueue APIs
over to the preferred unbound workqueues (Marco Crivellari)
- "Various mm kselftests improvements/fixes" provides various unrelated
improvements/fixes for the mm kselftests (Kevin Brodsky)
- "mm: accelerate gigantic folio allocation" greatly speeds up gigantic
folio allocation, mainly by avoiding unnecessary work in
pfn_range_valid_contig() (Kefeng Wang)
- "selftests/damon: improve leak detection and wss estimation
reliability" improves the reliability of two of the DAMON selftests
(SeongJae Park)
- "mm/damon: cleanup kdamond, damon_call(), damos filter and
DAMON_MIN_REGION" does some cleanup work in the core DAMON code
(SeongJae Park)
- "Docs/mm/damon: update intro, modules, maintainer profile, and misc"
|
