| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"Core:
- Add suuport for "rx-polarity" and "tx-polarity" device tree
properties and phy common properties to manage this
New Support:
- Qualcomm Glymur PCIe Gen4 2-lanes PCIe phy, DP and edp phy, USB UNI
PHY and SMB2370 eUSB2 repeater. SC8280xp QMP UFS PHY, Kaanapali
PCIe phy and QMP PHY, QCS615 QMP USB3+DP PHY and driver support for
that.
- SpacemiT PCIe/combo PHY and K1 USB2 PHY driver.
- HDMI 2.1 FRL configuration support and driver enabling for rockchip
samsung-hdptx driver
- TI TCAN1046 phy
- Renesas RZ/V2H(P) and RZ/V2N usb3
- Mediatek MT8188 hdmi-phy
- Google Tensor SoC USB PHY driver
- Apple Type-C PHY
Updates:
- Subsystem conversion for clock round_rate() to determine_rate()
- TI USB3 DT schema conversion
- Samsung ExynosAutov920 usb3, combo hsphy and ssphy support"
* tag 'phy-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (143 commits)
phy: ti: phy-j721e-wiz: convert from divider_round_rate() to divider_determine_rate()
dt-bindings: phy: ti,control-phy-otghs: convert to DT schema
dt-bindings: phy: ti,phy-usb3: convert to DT schema
phy: tegra: xusb: Remove unused powered_on variable
phy: renesas: rcar-gen3-usb2: add regulator dependency
phy: GOOGLE_USB: add TYPEC dependency
phy: enter drivers/phy/Makefile even without CONFIG_GENERIC_PHY
phy: renesas: rcar-gen3-usb2: Use mux-state for phyrst management
phy: renesas: rcar-gen3-usb2: Add regulator for OTG VBUS control
phy: renesas: rcar-gen3-usb2: Use devm_pm_runtime_enable()
phy: renesas: rcar-gen3-usb2: Factor out VBUS control logic
dt-bindings: phy: renesas,usb2-phy: Document RZ/G3E SoC
dt-bindings: phy: renesas,usb2-phy: Document mux-states property
dt-bindings: phy: renesas,usb2-phy: Document USB VBUS regulator
phy: rockchip: samsung-hdptx: Add HDMI 2.1 FRL support
phy: rockchip: samsung-hdptx: Extend rk_hdptx_phy_verify_hdmi_config() helper
phy: rockchip: samsung-hdptx: Switch to driver specific HDMI config
phy: rockchip: samsung-hdptx: Drop hw_rate driver data
phy: rockchip: samsung-hdptx: Compute clk rate from PLL config
phy: rockchip: samsung-hdptx: Cleanup *_cmn_init_seq lists
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- support for Qualcomm v2.2.0 controllers
- bus method updates for .probe(), .remove() and .shutdown()
and remove function return value updates
- Avell B.ON dmi-quirks mapping
- mark cs42l45 codec as wake capable
* tag 'soundwire-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_ace2x: add SND_HDA_CORE dependency
dt-bindings: soundwire: qcom: Add SoundWire v2.2.0 compatible
soundwire: Use bus methods for .probe(), .remove() and .shutdown()
soundwire: Make remove function return no value
soundwire: dmi-quirks: add mapping for Avell B.ON (OEM rebranded of NUC15)
soundwire: qcom: Use guard to avoid mixing cleanup and goto
soundwire: intel_auxdevice: add cs42l45 codec to wake_capable_list
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt driver updates for
7.0-rc1. Overall more lines were removed than added, thanks to
dropping the obsolete isp1362 USB host controller driver, always a
nice change.
Other than that, nothing major happening here, highlights are:
- lots of dwc3 driver updates and new hardware support added
- usb gadget function driver updates
- usb phy driver updates
- typec driver updates and additions
- USB rust binding updates for syntax and formatting changes
- more usb serial device ids added
- other smaller USB core and driver updates and additions
All of these have been in linux-next for a long time, with no reported
problems"
* tag 'usb-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (77 commits)
usb: typec: ucsi: Add Thunderbolt alternate mode support
usb: typec: hd3ss3220: Check if regulator needs to be switched
usb: phy: tegra: parametrize PORTSC1 register offset
usb: phy: tegra: parametrize HSIC PTS value
usb: phy: tegra: return error value from utmi_wait_register
usb: phy: tegra: cosmetic fixes
dt-bindings: usb: renesas,usbhs: Add RZ/G3E SoC support
usb: dwc2: fix resume failure if dr_mode is host
usb: cdns3: fix role switching during resume
usb: dwc3: gadget: Move vbus draw to workqueue context
USB: serial: option: add Telit FN920C04 RNDIS compositions
usb: dwc3: Log dwc3 address in traces
usb: gadget: tegra-xudc: Add handling for BLCG_COREPLL_PWRDN
usb: phy: tegra: add HSIC support
usb: phy: tegra: use phy type directly
usb: typec: ucsi: Enforce mode selection for cros_ec_ucsi
usb: typec: ucsi: Support mode selection to activate altmodes
usb: typec: Introduce mode_selection bit
usb: typec: Implement mode selection
usb: typec: Expose alternate mode priority via sysfs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the small amount of tty and serial driver updates for 7.0-rc1.
Nothing major in here at all, just some driver updates and minor
tweaks and cleanups including:
- sh-sci serial driver updates
- 8250 driver updates
- attempt to make the tty ports have their own workqueue, but was
reverted after testing found it to have problems on some platforms.
This will probably come back for 7.1 after it has been reworked and
resubmitted
- other tiny tty driver changes
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (49 commits)
Revert "tty: tty_port: add workqueue to flip TTY buffer"
tty: tty_port: add workqueue to flip TTY buffer
serial: 8250_pci: Remove custom deprecated baud setting routine
serial: 8250_omap: Remove custom deprecated baud setting routine
dt-bindings: serial: renesas,scif: Document RZ/G3L SoC
serial: 8250: omap: set out-of-band wakeup if wakeup pinctrl exists
tty: hvc-iucv: Remove KMSG_COMPONENT macro
dt-bindings: serial: google,goldfish-tty: Convert to DT schema
dt-bindings: serial: sh-sci: Fold single-entry compatibles into enum
serial: 8250: 8250_omap.c: Clear DMA RX running status only after DMA termination is done
serial: 8250: 8250_omap.c: Add support for handling UART error conditions
serial: SH_SCI: improve "DMA support" prompt
serial: Kconfig: fix ordering of entries for menu display
serial: 8250: fix ordering of entries for menu display
serial: imx: change SERIAL_IMX_CONSOLE to bool
8250_men_mcb: drop unneeded MODULE_ALIAS
serial: men_z135_uart: drop unneeded MODULE_ALIAS
dt-bindings: serial: renesas,rsci: Document RZ/V2H(P) and RZ/V2N SoCs
serial: rsci: Convert to FIELD_MODIFY()
dt-bindings: serial: 8250: add SpacemiT K3 UART compatible
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio and other smaller driver
subsystem changes for 7.0-rc1. Lots of little things in here,
including:
- Loads of iio driver changes and updates and additions
- gpib driver updates
- interconnect driver updates
- i3c driver updates
- hwtracing (coresight and intel) driver updates
- deletion of the obsolete mwave driver
- binder driver updates (rust and c versions)
- mhi driver updates (causing a merge conflict, see below)
- mei driver updates
- fsi driver updates
- eeprom driver updates
- lots of other small char and misc driver updates and cleanups
All of these have been in linux-next for a while, with no reported
issues"
* tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (297 commits)
mux: mmio: fix regmap leak on probe failure
rust_binder: return p from rust_binder_transaction_target_node()
drivers: android: binder: Update ARef imports from sync::aref
rust_binder: fix needless borrow in context.rs
iio: magn: mmc5633: Fix Kconfig for combination of I3C as module and driver builtin
iio: sca3000: Fix a resource leak in sca3000_probe()
iio: proximity: rfd77402: Add interrupt handling support
iio: proximity: rfd77402: Document device private data structure
iio: proximity: rfd77402: Use devm-managed mutex initialization
iio: proximity: rfd77402: Use kernel helper for result polling
iio: proximity: rfd77402: Align polling timeout with datasheet
iio: cros_ec: Allow enabling/disabling calibration mode
iio: frequency: ad9523: correct kernel-doc bad line warning
iio: buffer: buffer_impl.h: fix kernel-doc warnings
iio: gyro: itg3200: Fix unchecked return value in read_raw
MAINTAINERS: add entry for ADE9000 driver
iio: accel: sca3000: remove unused last_timestamp field
iio: accel: adxl372: remove unused int2_bitmask field
iio: adc: ad7766: Use iio_trigger_generic_data_rdy_poll()
iio: magnetometer: Remove IRQF_ONESHOT
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull more misc vfs updates from Christian Brauner:
"Features:
- Optimize close_range() from O(range size) to O(active FDs) by using
find_next_bit() on the open_fds bitmap instead of linearly scanning
the entire requested range. This is a significant improvement for
large-range close operations on sparse file descriptor tables.
- Add FS_XFLAG_VERITY file attribute for fs-verity files, retrievable
via FS_IOC_FSGETXATTR and file_getattr(). The flag is read-only.
Add tracepoints for fs-verity enable and verify operations,
replacing the previously removed debug printk's.
- Prevent nfsd from exporting special kernel filesystems like pidfs
and nsfs. These filesystems have custom ->open() and ->permission()
export methods that are designed for open_by_handle_at(2) only and
are incompatible with nfsd. Update the exportfs documentation
accordingly.
Fixes:
- Fix KMSAN uninit-value in ovl_fill_real() where strcmp() was used
on a non-null-terminated decrypted directory entry name from
fscrypt. This triggered on encrypted lower layers when the
decrypted name buffer contained uninitialized tail data.
The fix also adds VFS-level name_is_dot(), name_is_dotdot(), and
name_is_dot_dotdot() helpers, replacing various open-coded "." and
".." checks across the tree.
- Fix read-only fsflags not being reset together with xflags in
vfs_fileattr_set(). Currently harmless since no read-only xflags
overlap with flags, but this would cause inconsistencies for any
future shared read-only flag
- Return -EREMOTE instead of -ESRCH from PIDFD_GET_INFO when the
target process is in a different pid namespace. This lets userspace
distinguish "process exited" from "process in another namespace",
matching glibc's pidfd_getpid() behavior
Cleanups:
- Use C-string literals in the Rust seq_file bindings, replacing the
kernel::c_str!() macro (available since Rust 1.77)
- Fix typo in d_walk_ret enum comment, add porting notes for the
readlink_copy() calling convention change"
* tag 'vfs-7.0-rc1.misc.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: add porting notes about readlink_copy()
pidfs: return -EREMOTE when PIDFD_GET_INFO is called on another ns
nfsd: do not allow exporting of special kernel filesystems
exportfs: clarify the documentation of open()/permission() expotrfs ops
fsverity: add tracepoints
fs: add FS_XFLAG_VERITY for fs-verity files
rust: seq_file: replace `kernel::c_str!` with C-Strings
fs: dcache: fix typo in enum d_walk_ret comment
ovl: use name_is_dot* helpers in readdir code
fs: add helpers name_is_dot{,dot,_dotdot}
ovl: Fix uninit-value in ovl_fill_real
fs: reset read-only fsflags together with xflags
fs/file: optimize close_range() complexity from O(N) to O(Sparse)
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- iTCO: Drop vendor support
- s3c2410_wdt: Drop S3C2410 support
- Convert mpc8xxx-wdt to YAML
- Several small fixes and improvements
* tag 'linux-watchdog-6.20-rc1' of git://www.linux-watchdog.org/linux-watchdog:
dt-bindings: watchdog: qcom-wdt: Document Glymur watchdog
dt-bindings: watchdog: Convert mpc8xxx-wdt to YAML
dt-bindings: watchdog: samsung-wdt: Split if:then: and constrain more
dt-bindings: watchdog: samsung-wdt: Drop S3C2410
watchdog: s3c2410_wdt: Drop S3C2410 support
dt-bindings: watchdog: samsung-wdt: Define cluster constraints top-level
watchdog: rzv2h_wdt: Discard pm_runtime_put() return value
watchdog: rz: Discard pm_runtime_put() return values
watchdog: Make API functions const correct
watchdog: imx7ulp_wdt: handle the nowayout option
watchdog: sbsa: Update the W_IIDR Implementer bit mask to 0xFFF
watchdog: Always return time left until watchdog times out
watchdog: iTCO: Drop vendor support
watchdog: starfive-wdt: Fix PM reference leak in probe error path
fix it87_wdt early reboot by reporting running timer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"New Support & Features:
- Add support for the TI LP5812 4x3 matrix RGB LED driver, including
autonomous animation engine control and extensive scan multiplexing
modes
- Add a new driver for the ams Osram AS3668 4-channel I2C LED
controller
- Extend the is31fl32xx driver to support the is31fl3293 variant,
which features 3 channels and 12-bit PWM resolution
Improvements & Fixes:
- Prevent the ExpressWire KTD2801 chip from entering an undefined
state by disabling interrupts during time-sensitive communication
- Ensure the Qualcomm LPG driver detects hardware write failures by
checking the return value of regmap_bulk_write() during LUT
programming
- Fix kernel-doc warnings in the lm3692x driver by documenting
missing struct members and standardizing the comment style
- Update the ExpressWire library to use fsleep() and unexport
internal-only functions
- Improve the is31fl32xx driver by reordering code to eliminate
unnecessary forward declarations
Cleanups & Refactoring:
- Simplify the LP55XX common LED driver by utilizing the
for_each_available_child_of_node_scoped() macro for more concise
node iteration
Device Tree Bindings Updates:
- Add new YAML bindings for the TI LP5860 and LP5812 LED controllers,
and the ams Osram AS3668
- Convert the TI LM3697 white LED driver binding to DT schema format
- Allow multicolor LED nodes to be named with numeric suffixes (e.g.,
multi-led-0) to handle multiple instances without unit addresses
- Document support for the PMH0101 variant in the Qualcomm LPG PWM
and SPMI Flash LED bindings
- Add the issi,is31fl3293 compatible string to the is31fl32xx
binding"
* tag 'leds-next-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds:
dt-bindings: leds: Convert ti,lm3697 to DT schema
leds: as3668: Driver for the ams Osram 4-channel i2c LED driver
dt-bindings: leds: Add new as3668 support
docs: leds: Document TI LP5812 LED driver
leds: Add basic support for TI/National Semiconductor LP5812 LED Driver
leds: qcom-lpg: Check the return value of regmap_bulk_write()
dt-bindings: leds: qcom,spmi-flash-led: Add PMH0101 compatible
dt-bindings: leds: leds-qcom-lpg: Add support for PMH0101 PWM
dt-bindings: leds: Allow differently named multicolor LEDs
leds: lp55xx: Simplify with scoped for each OF child loop
dt-bindings: leds: add TI/National Semiconductor LP5812 LED Driver
leds: is31f132xx: Add support for is31fl3293
leds: is31f132xx: Re-order code to remove forward declarations
dt-bindings: leds: Add issi,is31fl3293 to leds-is31fl32xx
leds: expresswire: Fix chip state breakage
dt-bindings: leds: Add LP5860 LED controller
leds: lm3692x: Fix kernel-doc for struct lm3692x_led
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Support & Features:
- Add a new driver for the Congatec Board Controller (CGBC)
backlight, providing brightness control via the board controller's
PWM interface
Improvements & Fixes:
- Resolve build failures in the Awinic AW99706 driver by switching to
the correct GPIO consumer header
- Extend the Qualcomm WLED driver to support the specific
over-voltage protection (OVP) values required for the PMI8994 and
PMI8950 variants
Device Tree Bindings Updates:
- Document the device-specific over-voltage protection (OVP)
millivolt ranges and default values for Qualcomm PMI8994 and
PMI8950 WLED controllers"
* tag 'backlight-next-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: qcom-wled: Change PM8950 WLED configurations
dt-bindings: backlight: qcom-wled: Document ovp values for PMI8950
backlight: qcom-wled: Support ovp values for PMI8994
dt-bindings: backlight: qcom-wled: Document ovp values for PMI8994
backlight: aw99706: Fix build errors caused by wrong gpio header
backlight: Add Congatec Board Controller (CGBC) backlight support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Support & Features:
- Add comprehensive support for the ROHM BD72720 PMIC, including core
MFD, regulator, GPIO, clock gate, RTC, and power-supply drivers
- Add support for the Rockchip RK801 PMIC, including core MFD and
regulator drivers
- Add support for the ROHM BD73900 PMIC by leveraging existing common
drivers
- Wire up RTC, hwmon, and input sub-devices for the Apple SMC
(macsmc) driver
- Add support for the Delta Networks TN48M switch CPLD via the
simple-mfd-i2c driver
- Add support for the TS133 variant to the QNAP MCU driver
- Provide support for the sama7d65 XLCD controller in the Atmel HLCDC
driver
- Add backlight sub-device support to the Congatec Board Controller
(cgbc)
- Add Intel Nova Lake-S (NVL-S) PCI IDs to the Intel LPSS driver
Improvements & Fixes:
- Implement a "wrapper regmap" for the ROHM BD72720 to handle dual
I2C slave addresses (0x4b and 0x4c) transparently for child devices
- Introduce mutex locking around 'mfd_of_node_list' in the MFD core
to ensure safe concurrent access
- Fix a potential regulator resource leak in the Arizona core driver
during boot sequence failures
- Resolve child device duplication issues on driver rebind for
Qualcomm PM8xxx and OMAP USB host drivers by using
of_platform_depopulate()
- Fix IRQ domain name duplication for the Samsung S2MPG10 by adding a
unique domain suffix
- Implement LOCK register handling for the TI TPS65214 variant to
unlock registers at probe time
- Fully convert the Loongson-2K BMC driver to use managed resources
(pcim) and the standard PCI resource API
- Ensure the Apple SMC mutex is correctly initialized during probe to
prevent NULL pointer dereferences
- Expand the ROHM BD71828 power-supply driver to support 9-bit
register addresses
- Simplify the Samsung S5M RTC driver by querying platform device IRQ
resources directly
- Revert an incorrect read-to-write mask change in the DA9052 SPI
driver to restore default OTP behavior
- Fix kernel-doc warnings in the TI TPS6105x driver
- Cleanups & Refactoring
- Simplify the MFD core by utilizing the scoped
for_each_child_of_node_scoped() macro and streamlining device_node
storage
- Rename ROHM BD71828 IC-specific entities to use consistent prefixes
for better extensibility
- Refactor ROHM BD71828 regmap definitions using the
regmap_reg_range() macro
- Update the ROHM BD71828 driver to use standard C-style comment
headers
- Remove the now unused 'irq_data' field from the Samsung SEC core
structure
- Drop unnecessary use of irqd_get_trigger_type() in the Maxim
MAX77759 driver
- Default MFD_SPACEMIT_P1 to 'm' if ARCH_SPACEMIT is selected
- Add missing charger-related registers to the ROHM BD71828 core
header and Type-C CC registers to the AXP717
Device Tree Binding Updates:
- Add new bindings for the ROHM BD72720 PMIC, Rockchip RK801 PMIC,
Bitmain BM1880 System Controller, and NXP LPC32xx System Control
Block
- Clarify trickle-charge terminology and add properties for voltage
drop (VDR) correction and upper charge limits to the generic
battery binding
- Document GPR syscon for NXP S32 SoCs and the smp-memram subnode for
Aspeed SCU
- Document numerous new Qualcomm SPMI PMIC compatibles (pmcx0102,
pmh0101, pmk8850, etc)
- Add compatibles for the sama7d65 XLCD (Atmel), LAN9691 Flexcom
(Microchip), and various MediaTek SCPSYS and regulator components
- Fix a dead link to the audio codec binding in the DA9055
documentation"
* tag 'mfd-next-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (41 commits)
dt-bindings: mfd: da9055: Fix dead link to codec binding
mfd: cgbc: Add support for backlight
dt-bindings: mfd: qcom,spmi-pmic: Document PMICs present on Glymur and Kaanapali
dt-bindings: mfd: Document smp-memram subnode for aspeed,ast2x00-scu
mfd: intel-lpss: Add Intel Nova Lake-S PCI IDs
mfd: ls2kbmc: Use PCI API instead of direct accesses
mfd: ls2kbmc: Fully convert to use managed resources
dt-bindings: mfd: mediatek: mt6397: Add missing MT6331 regulator compat
dt-bindings: mfd: mediatek,mt8195-scpsys: Add mediatek,mt6795-scpsys
dt-bindings: mfd: atmel,sama5d2-flexcom: Add microchip,lan9691-flexcom
mfd: omap-usb-host: Fix OF populate on driver rebind
mfd: qcom-pm8xxx: Fix OF populate on driver rebind
dt-bindings: mfd: syscon: Allow syscon compatible for mediatek,mt7981-topmisc
mfd: qnap-mcu: Add driver data for TS133 variant
dt-bindings: mfd: qnap,ts433-mcu: Add qnap,ts133-mcu compatible
mfd: sec: Fix IRQ domain names duplication
mfd: simple-mfd-i2c: Add Delta TN48M CPLD support
mfd: macsmc: Initialize mutex
dt-bindings: mfd: nxp: Add NXP LPC32xx System Control Block
mfd: Kconfig: Default MFD_SPACEMIT_P1 to 'm' if ARCH_SPACEMIT
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- Drop the unused devm_pinctrl_unregister() function
- Move pretended generic pin control functionality out of the core
and into the Amlogic AM4 driver. We have something better coming
(hopefully)
New hardware support:
- Spacemit K3 (RISC-V) pin control support
- Atmel AT91 PIO4 (ARM32) SAMA7D65 pin control support
- Exynos9610 (ARM64) pin control support
- Qualcomm Mahua TLMM (ARM64) pin control support
- Microchip Polarfire MSSIO (RISC-V) pin control support
- Ocelot LAN9645XF (multiplatform) pin control support
Improvements:
- Using a few more guards for locking
- Various nonurgent fixes and tweaks"
* tag 'pinctrl-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (73 commits)
pinctrl: generic: move function to amlogic-am4 driver
pinctrl: intel: Align Copyright note with corporate guidelines
pinctrl: mediatek: remove unused drv_offset field
pinctrl: canaan: k230: Fix NULL pointer dereference when parsing devicetree
pinctrl: single: fix refcount leak in pcs_add_gpio_func()
pinctrl: meson: amlogic-a4: Fix device node reference leak in bank helpers
pinctrl: qcom: sm8250-lpass-lpi: Fix i2s2_data_groups definition
pinctrl: core: Remove duplicate error messages
pinctrl: core: Simplify devm_pinctrl_*()
pinctrl: core: Remove unused devm_pinctrl_unregister()
dt-bindings: pinctrl: spacemit: fix drive-strength check warning
pinctrl: fix kismet issues with GENERIC_PINCTRL
pinctrl: tangier: Join tng_pinctrl_probe() into its wrapper
pinctrl: tangier: Remove duplicate error messages
pinctrl: lynxpoint: Remove duplicate error messages
pinctrl: cherryview: Remove duplicate error messages
pinctrl: baytrail: Remove duplicate error messages
pinctrl: intel: Remove duplicate error messages
pinctrl: equilibrium: Fix device node reference leak in pinbank_init()
dt-bindings: pinctrl: pinctrl-microchip-sgpio: add LAN969x
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux
Pull documentation fixes from Jonathan Corbet:
"A handful of small, late-arriving documentation fixes"
* tag 'docs-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux:
docs: toshiba_haps: fix grammar error in SSD warning
Docs/mm: fix typos and grammar in page_tables.rst
Docs/core-api: fix typos in rbtree.rst
docs: clarify wording in programming-language.rst
docs: process: maintainer-pgp-guide: update kernel.org docs link
docs: kdoc_parser: allow __exit in function prototypes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm
Pull TSM updates from Dan Williams:
"A couple of updates to the maximum buffer sizes supported for the
configfs-tsm-reports interface.
This interface is a common transport that conveys the varied
architecture specific launch attestation reports for confidential VMs.
- Prepare the configfs-tsm-reports interface for passing larger
attestation evidence blobs for "Device Identifier Composition
Engine" (DICE) and Post Quantum Crypto (PQC)
- Update the tdx-guest driver for DICE evidence (larger certificate
chains and the CBOR Web Token schema)"
* tag 'tsm-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
configfs-tsm-report: tdx_guest: Increase Quote buffer size to 128KB
configfs-tsm-report: Increase TSM_REPORT_OUTBLOB_MAX to 16MB
configfs-tsm-report: Document size limits for outblob attributes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- core: cleaner fwnode usage
- tegra: timing improvements and Tegra264 support
- lpi2c: fix SMBus block read NACK after byte count
- amd-mp2, designware, mlxbf, rtl9300, spacemit, tegra: cleanups
- designware:
- use a dedicated algorithm for AMD Navi
- replace magic numbers with named constants
- replace min_t() with min() to avoid u8 truncation
- refactor core to enable mode switching
- imx-lpi2c: add runtime PM support for IRQ and clock handling
- lan9691-i2c: add new driver
- rtl9300: use OF helpers directly and avoid fwnode handling
- spacemit: add bus reset support
- units: add HZ_PER_GHZ and use it in several i2c drivers
- at24 i2c eeprom:
- add a set of new compatibles to DT bindings
- use dev_err_probe() consistently in the driver
* tag 'i2c-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (46 commits)
i2c: imx-lpi2c: fix SMBus block read NACK after byte count
i2c: designware: Remove an unnecessary condition
i2c: designware: Enable mode swapping
i2c: designware: Combine the init functions
i2c: designware: Combine some of the common functions
i2c: designware: Use device_is_compatible() instead of custom approach
dt-bindings: eeprom: at24: Add compatible for Puya P24C128F
drivers/i2c/busses: use min() instead of min_t()
i2c: imx-lpi2c: Add runtime PM support for IRQ and clock management on i.MX8QXP/8QM
i2c: amd-mp2: clean up amd_mp2_find_device()
i2c: designware: Replace magic numbers with named constants
i2c: rtl9300: use of instead of fwnode
i2c: rtl9300: remove const cast
i2c: tegra: remove unused rst
i2c: designware: Remove not-going-to-be-supported code for Baikal SoC
i2c: spacemit: drop useless spaces
i2c: mlxbf: Use HZ_PER_KHZ in the driver
i2c: mlxbf: Remove unused bus speed definitions
i2c: core: Use dev_fwnode()
i2c: core: Replace custom implementation of device_match_fwnode()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for FocalTech FT8112 added to i2c-hid driver
- support for FocalTech FT3518 added to edt-ft5x06 driver
- support for power buttons in TWL603x chips added to twl4030-pwrbutton
driver
- an update to gpio-decoder driver to make it usable on non-OF
platforms and to clean up the code
- an update to synaptics_i2c driver switching it to use managed
resources and a fix to restarting polling after resume
- an update to gpio-keys driver to fall back to getting IRQ from
resources if not specified using other means
- an update to ili210x driver to support polling mode
- a number of input drivers switched to scnprintf() to suppress
truncation warnings
- a number of updates and conversions of device tree bindings to yaml
format
- fixes to spelling in comments and messages in several drivers
- other assorted fixups
* tag 'input-for-v7.0-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)
dt-bindings: input: qcom,pm8941-pwrkey: Document PMM8654AU
dt-bindings: input: touchscreen: imagis: allow linux,keycodes for ist3038
Input: apbps2 - fix comment style and typos
Input: gpio_keys - fall back to platform_get_irq() for interrupt-only keys
Input: novatek-nvt-ts - drop wake_type check
dt-bindings: input: touchscreen: tsc2007: document '#io-channel-cells'
Input: ili210x - add support for polling mode
dt-bindings: touchscreen: trivial-touch: Drop 'interrupts' requirement for old Ilitek
Input: appletouch - fix potential race between resume and open
HID: i2c-hid: Add FocalTech FT8112
dt-bindings: input: i2c-hid: Introduce FocalTech FT8112
Input: synaptics_i2c - switch to using managed resources
Input: synaptics_i2c - guard polling restart in resume
Input: gpio_decoder - don't use "proxy" headers
Input: gpio_decoder - make use of the macros from bits.h
Input: gpio_decoder - replace custom loop by gpiod_get_array_value_cansleep()
Input: gpio_decoder - unify messages with help of dev_err_probe()
Input: gpio_decoder - make use of device properties
Input: serio - complete sizeof(*pointer) conversions
Input: wdt87xx_i2c - switch to use dev_err_probe()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Not much changed in the clk framework this time except the clk.h
consumer API moved the context saving APIs around to fix a build error
in certain configurations.
There was a change to the core framework for CLK_OPS_PARENT_ENABLE
behavior during registration, but it wrecked existing drivers that
didn't expect things to be turned off during clk registration so it
got reverted.
This cycle is really a large collection of new clk drivers, primarily
for Qualcomm SoCs but also for Amlogic, SpacemiT, Google, and Aspeed.
Another big change in here is support for automatic hardware clock
gating on Samsung SoCs where the clks turn on and off when needed.
Ideally more vendors move to this method for better power savings. The
highlights are in the updates section below.
Beyond all the new drivers we have a bunch of cleanups like converting
drivers from divider_round_rate() to divider_determine_rate() and
using scoped for each OF child loops. Otherwise it's the usual data
fixes and plugging reference leaks, etc. that's all pretty ordinary
but not critical enough to fix until the next release.
New Drivers:
- Qualcomm Kaanapali global, tcsr, rpmh, display, gpu, camera, and
video clk controllers
- Qualcomm SM8750 camera clk controllers
- Qualcomm MSM8940 and SDM439 global clk controllers
- Google GS101 Display Process Unit (DPU) clk controllers
- SpacemiT K3 clk controllers
- Amlogic t7 clk controllers
- Aspeed AST2700 clk controllers
Updates:
- Convert clock dividers from round_rate() to determine_rate()
- Fix sparse warnings, kernel-doc warnings, and plug leaked OF refs
- Automatic hardware clk gating on Google GS101 SoCs
- Amlogic s4 video clks
- CAN-FD clks and resets on Renesas RZ/T2H, RZ/N2H, RZ/V2H, and
RZ/V2N
- Expanded Serial Peripheral Interface (xSPI) clocks and resets on
Renesas RZ/T21H and RZ/N2H
- DMAC, interrupt controller (ICU), SPI, and thermal (TSU) clocks and
resets on Renesas RZ/V2N
- More serial (RSCI) clocks and resets on Renesas RZ/V2H and RZ/V2N
- CPU frequency scaling on T-HEAD TH1520"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (165 commits)
clk: aspeed: Add reset for HACE/VIDEO
dt-bindings: clock: aspeed: Add VIDEO reset definition
clk: aspeed: add AST2700 clock driver
MAINTAINERS: Add entry for ASPEED clock drivers.
clk: aspeed: Move the existing ASPEED clk drivers into aspeed subdirectory.
Revert "clk: Respect CLK_OPS_PARENT_ENABLE during recalc"
clk: Disable KUNIT_UML_PCI
dt-bindings: clk: rs9: Fix DIF pattern match
clk: rs9: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
clk: rs9: Reserve 8 struct clk_hw slots for for 9FGV0841
clk: qcom: sm8750: Constify 'qcom_cc_desc' in SM8750 camcc
clk: zynqmp: pll: Fix zynqmp_clk_divider_determine_rate kerneldoc
clk: zynqmp: divider: Fix zynqmp_clk_divider_determine_rate kerneldoc
clk: mediatek: Fix error handling in runtime PM setup
clk: mediatek: don't select clk-mt8192 for all ARM64 builds
clk: mediatek: Add mfg_eb as parent to mt8196 mfgpll clocks
clk: mediatek: Refactor pllfh registration to pass device
clk: mediatek: Pass device to clk_hw_register for PLLs
clk: mediatek: Refactor pll registration to pass device
clk: Respect CLK_OPS_PARENT_ENABLE during recalc
...
|
|
Prepare input updates for 7.0 merge window.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Select HAVE_CMPXCHG_{LOCAL,DOUBLE}
- Add 128-bit atomic cmpxchg support
- Add HOTPLUG_SMT implementation
- Wire up memfd_secret system call
- Fix boot errors and unwind errors for KASAN
- Use BPF prog pack allocator and add BPF arena support
- Update dts files to add nand controllers
- Some bug fixes and other small changes
* tag 'loongarch-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: dts: loongson-2k1000: Add nand controller support
LoongArch: dts: loongson-2k0500: Add nand controller support
LoongArch: BPF: Implement bpf_addr_space_cast instruction
LoongArch: BPF: Implement PROBE_MEM32 pseudo instructions
LoongArch: BPF: Use BPF prog pack allocator
LoongArch: Use IS_ERR_PCPU() macro for KGDB
LoongArch: Rework KASAN initialization for PTW-enabled systems
LoongArch: Disable instrumentation for setup_ptwalker()
LoongArch: Remove some extern variables in source files
LoongArch: Guard percpu handler under !CONFIG_PREEMPT_RT
LoongArch: Handle percpu handler address for ORC unwinder
LoongArch: Use %px to print unmodified unwinding address
LoongArch: Prefer top-down allocation after arch_mem_init()
LoongArch: Add HOTPLUG_SMT implementation
LoongArch: Make cpumask_of_node() robust against NUMA_NO_NODE
LoongArch: Wire up memfd_secret system call
LoongArch: Replace seq_printf() with seq_puts() for simple strings
LoongArch: Add 128-bit atomic cmpxchg support
LoongArch: Add detection for SC.Q support
LoongArch: Select HAVE_CMPXCHG_LOCAL in Kconfig
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- Fix a memory remapping issue and make a few life-cycle improvements
in the i.MX HiFi remoteproc driver
- Add support the System Manager CPU and LMM APIs and use this to
support i.MX95
- Rework the handling of the Mediatek SCP clock to avoid a potential
circular deadlock in the clock providers
- Refactor the Qualcomm secure-world helpers and add support in the
Qualcomm PAS remoteproc driver for reading a resource-table from
secure world. Use this to configure the IOMMU on newer targets where
Linux runs in EL2
* tag 'rproc-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
remoteproc: imx_rproc: Fix invalid loaded resource table detection
remoteproc: mediatek: Break lock dependency to `prepare_lock`
remoteproc: imx_rproc: Add support for i.MX95
remoteproc: imx_rproc: Add support for System Manager CPU API
remoteproc: imx_rproc: Add support for System Manager LMM API
remoteproc: imx_rproc: Introduce prepare ops for imx_rproc_dcfg
remoteproc: imx_rproc: Add runtime ops copy to support dynamic behavior
dt-bindings: remoteproc: fsl,imx-rproc: Add support for i.MX95
dt-bindings: remoteproc: Add HSM M4F core on TI K3 SoCs
remoteproc: xlnx_r5: Simplify with scoped for each OF child loop
remoteproc: mtk_scp: Simplify with scoped for each OF child loop
remoteproc: imx_dsp_rproc: Only reset carveout memory at RPROC_OFFLINE state
dt-bindings: remoteproc: qcom,sm8550-pas: Drop SM8750 ADSP from if-branch
dt-bindings: remoteproc: qcom,adsp: Allow cx-supply on qcom,sdm845-slpi-pas
remoteproc: imx_dsp_rproc: Fix multiple start/stop operations
remoteproc: imx_rproc: Use strstarts for "rsc-table" check
remoteproc: imx_dsp_rproc: Wait for suspend ACK only if WAIT_FW_CONFIRMATION is set
remoteproc: imx_dsp_rproc: Rename macro to reflect multiple contexts
remoteproc: imx_dsp_rproc: Skip RP_MBOX_SUSPEND_SYSTEM when mailbox TX channel is uninitialized
dt-bindings: remoteproc: Fix dead link to Keystone DSP GPIO binding
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
"Platform and core updates
PCC:
- Updates to transmission and interrupt handling, including dynamic
txdone configuration, ->last_tx_done() wiring, and SHMEM
initialization fixes. Reverted previous shared buffer patch
MediaTek
- Introduce mtk-vcp-mailbox driver and bindings for MT8196 VCP
- Expand mtk-cmdq for MT8196 with GCE virtualization, mminfra_offset,
and instruction generation data
Spreadtrum (SPRD)
- Add Mailbox Revision 2 support and UMS9230 bindings
- Fix unhandled interrupt masking and TX done delivery flags
Microchip
- Add pic64gx compatibility to MPFS
- Fix out-of-bounds access and smatch warnings in mchp-ipc-sbi
Core & Misc Platform Updates
- Prevent out-of-bounds access in fw_mbox_index_xlate()
- Add bindings for Qualcomm CPUCP (Kaanapali)
- Simplify mtk-cmdq and zynqmp-ipi with scoped OF child iterators
- Consolidate various minor fixes, dead code removal, and typo
corrections across Broadcom, NXP, Samsung, Xilinx, ARM, and core
headers"
* tag 'mailbox-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: (34 commits)
mailbox: sprd: mask interrupts that are not handled
mailbox: sprd: add support for mailbox revision 2
mailbox: sprd: clear delivery flag before handling TX done
dt-bindings: mailbox: sprd: add compatible for UMS9230
mailbox: bcm-ferxrm-mailbox: Use default primary handler
mailbox: Remove mailbox_client.h from controller drivers
mailbox: zynqmp-ipi: Simplify with scoped for each OF child loop
mailbox: mtk-cmdq: Simplify with scoped for each OF child loop
dt-bindings: mailbox: xlnx,zynqmp-ipi-mailbox: Document msg region requirement
mailbox: Improve RISCV_SBI_MPXY_MBOX guidance
mailbox: mchp-ipc-sbi: fix uninitialized symbol and other smatch warnings
mailbox: arm_mhuv3: fix typo in comment
mailbox: cix: fix typo in error message
mailbox: imx: Skip the suspend flag for i.MX7ULP
mailbox: exynos: drop unneeded runtime pointer (pclk)
mailbox: pcc: Remove spurious IRQF_ONESHOT usage
mailbox: mtk-cmdq: Add driver data to support for MT8196
mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction
mailbox: mtk-cmdq: Add GCE hardware virtualization configuration
mailbox: mtk-cmdq: Add cmdq private data to cmdq_pkt for generating instruction
...
|
|
* clk-aspeed:
clk: aspeed: Add reset for HACE/VIDEO
dt-bindings: clock: aspeed: Add VIDEO reset definition
clk: aspeed: add AST2700 clock driver
MAINTAINERS: Add entry for ASPEED clock drivers.
clk: aspeed: Move the existing ASPEED clk drivers into aspeed subdirectory.
* clk-qcom: (49 commits)
clk: qcom: sm8750: Constify 'qcom_cc_desc' in SM8750 camcc
clk: qcom: gfx3d: add parent to parent request map
clk: qcom: dispcc-sm7150: Fix dispcc_mdss_pclk1_clk_src
clk: qcom: dispcc-sdm845: Enable parents for pixel clocks
clk: qcom: regmap-divider: convert from divider_round_rate() to divider_determine_rate()
clk: qcom: regmap-divider: convert from divider_ro_round_rate() to divider_ro_determine_rate()
clk: qcom: alpha-pll: convert from divider_round_rate() to divider_determine_rate()
clk: qcom: Add support for GPUCC and GXCLK for Kaanapali
clk: qcom: Add support for VideoCC driver for Kaanapali
clk: qcom: camcc: Add support for camera clock controller for Kaanapali
clk: qcom: dispcc: Add support for display clock controller Kaanapali
clk: qcom: clk-alpha-pll: Add support for controlling Pongo EKO_T PLL
clk: qcom: clk-alpha-pll: Update the PLL support for cal_l
clk: qcom: camcc: Add camera clock controller driver for SM8750 SoC
clk: qcom: clk-alpha-pll: Add support for controlling Rivian PLL
dt-bindings: clock: qcom: document the Kaanapali GPU Clock Controller
dt-bindings: clock: qcom: Add Kaanapali video clock controller
dt-bindings: clock: qcom: Add support for CAMCC for Kaanapali
dt-bindings: clock: qcom: document Kaanapali DISPCC clock controller
dt-bindings: clock: qcom: Add camera clock controller for SM8750 SoC
...
|
|
into clk-next
* clk-imx:
clk: imx: fracn-gppll: Add 241.90 MHz Support
clk: imx: fracn-gppll: Add 332.60 MHz Support
* clk-divider:
rtc: ac100: convert from divider_round_rate() to divider_determine_rate()
clk: zynqmp: divider: convert from divider_round_rate() to divider_determine_rate()
clk: x86: cgu: convert from divider_round_rate() to divider_determine_rate()
clk: versaclock3: convert from divider_round_rate() to divider_determine_rate()
clk: stm32: stm32-core: convert from divider_round_rate_parent() to divider_determine_rate()
clk: stm32: stm32-core: convert from divider_ro_round_rate() to divider_ro_determine_rate()
clk: sprd: div: convert from divider_round_rate() to divider_determine_rate()
clk: sophgo: sg2042-clkgen: convert from divider_round_rate() to divider_determine_rate()
clk: nxp: lpc32xx: convert from divider_round_rate() to divider_determine_rate()
clk: nuvoton: ma35d1-divider: convert from divider_round_rate() to divider_determine_rate()
clk: milbeaut: convert from divider_round_rate() to divider_determine_rate()
clk: milbeaut: convert from divider_ro_round_rate() to divider_ro_determine_rate()
clk: loongson1: convert from divider_round_rate() to divider_determine_rate()
clk: hisilicon: clkdivider-hi6220: convert from divider_round_rate() to divider_determine_rate()
clk: bm1880: convert from divider_round_rate() to divider_determine_rate()
clk: bm1880: convert from divider_ro_round_rate() to divider_ro_determine_rate()
clk: actions: owl-divider: convert from divider_round_rate() to divider_determine_rate()
clk: actions: owl-composite: convert from owl_divider_helper_round_rate() to divider_determine_rate()
clk: sunxi-ng: convert from divider_round_rate_parent() to divider_determine_rate()
clk: sophgo: cv18xx-ip: convert from divider_round_rate() to divider_determine_rate()
* clk-rockchip:
clk: rockchip: Fix error pointer check after rockchip_clk_register_gate_link()
* clk-microchip:
dt-bindings: clock: mpfs-clkcfg: Add pic64gx compatibility
dt-bindings: clock: mpfs-ccc: Add pic64gx compatibility
clk: microchip: drop POLARFIRE from ARCH_MICROCHIP_POLARFIRE
clk: microchip: core: remove unused include asm/traps.h
clk: microchip: core: correct return value on *_get_parent()
clk: microchip: core: remove duplicate determine_rate on pic32_sclk_ops
|
|
into clk-next
* clk-amlogic:
clk: meson: gxbb: use the existing HHI_HDMI_PLL_CNTL3 macro
clk: meson: g12a: Limit the HDMI PLL OD to /4
clk: meson: gxbb: Limit the HDMI PLL OD to /4 on GXL/GXM SoCs
clk: amlogic: remove potentially unsafe flags from S4 video clocks
clk: amlogic: add video-related clocks for S4 SoC
dt-bindings: clock: add video clock indices for Amlogic S4 SoC
clk: meson: t7: add t7 clock peripherals controller driver
clk: meson: t7: add support for the T7 SoC PLL clock
dt-bindings: clock: add Amlogic T7 peripherals clock controller
dt-bindings: clock: add Amlogic T7 SCMI clock controller
dt-bindings: clock: add Amlogic T7 PLL clock controller
* clk-thead:
clk: thead: th1520-ap: Support CPU frequency scaling
clk: thead: th1520-ap: Add macro to define multiplexers with flags
clk: thead: th1520-ap: Support setting PLL rates
clk: thead: th1520-ap: Add C910 bus clock
clk: thead: th1520-ap: Poll for PLL lock and wait for stability
dt-bindings: clock: thead,th1520-clk-ap: Add ID for C910 bus clock
* clk-mediatek:
Revert "clk: Respect CLK_OPS_PARENT_ENABLE during recalc"
clk: mediatek: Fix error handling in runtime PM setup
clk: mediatek: don't select clk-mt8192 for all ARM64 builds
clk: mediatek: Add mfg_eb as parent to mt8196 mfgpll clocks
clk: mediatek: Refactor pllfh registration to pass device
clk: mediatek: Pass device to clk_hw_register for PLLs
clk: mediatek: Refactor pll registration to pass device
clk: Respect CLK_OPS_PARENT_ENABLE during recalc
dt-bindings: clock: mediatek,mt7622-pciesys: Remove syscon compatible
clk: mediatek: Drop __initconst from gates
* clk-samsung:
clk: samsung: gs101: add support for Display Process Unit (DPU) clocks
dt-bindings: samsung: exynos-sysreg: add gs101 dpu compatible
dt-bindings: clock: google,gs101-clock: Add DPU clock management unit
dt-bindings: clock: google,gs101-clock: fix alphanumeric ordering
clk: samsung: fix sysreg save/restore when PM is enabled for CMU
clk: samsung: avoid warning message on legacy Exynos (auto clock gating)
clk: samsung: gs101: Enable auto_clock_gate mode for each gs101 CMU
clk: samsung: Implement automatic clock gating mode for CMUs
dt-bindings: clock: google,gs101-clock: add samsung,sysreg property as required
clk: samsung: exynosautov920: add clock support
dt-bindings: clock: exynosautov920: add MFD clock definitions
|
|
into clk-next
* clk-renesas: (25 commits)
dt-bindings: clk: rs9: Fix DIF pattern match
clk: rs9: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
clk: rs9: Reserve 8 struct clk_hw slots for for 9FGV0841
clk: renesas: Add missing log message terminators
clk: renesas: rzg2l: Remove DSI clock rate restrictions
clk: renesas: rzv2h: Deassert reset on assert timeout
clk: renesas: rzg2l: Deassert reset on assert timeout
clk: renesas: cpg-mssr: Unlock before reset verification
clk: renesas: r9a09g056: Add entries for CANFD
clk: renesas: r9a09g057: Add entries for CANFD
clk: renesas: r9a09g077: Add CANFD clocks
clk: renesas: cpg-mssr: Handle RZ/T2H register layout in PM callbacks
dt-bindings: clock: renesas,r9a09g077/87: Add PCLKCAN ID
clk: renesas: cpg-mssr: Simplify pointer math in cpg_rzt2h_mstp_read()
clk: renesas: r9a09g056: Add clock and reset entries for TSU
clk: renesas: r9a09g057: Add entries for RSCIs
clk: renesas: r9a09g056: Add entries for RSCIs
clk: renesas: r9a09g056: Add entries for the RSPIs
clk: renesas: r9a09g056: Add entries for ICU
clk: renesas: r9a09g056: Add entries for the DMACs
...
* clk-cleanup:
clk: Disable KUNIT_UML_PCI
clk: zynqmp: pll: Fix zynqmp_clk_divider_determine_rate kerneldoc
clk: zynqmp: divider: Fix zynqmp_clk_divider_determine_rate kerneldoc
clk: tegra: tegra124-emc: fix device leak on set_rate()
clk: Annotate #else and #endif
clk: Merge prepare and unprepare sections
clk: Move clk_{save,restore}_context() to COMMON_CLK section
clk: clk-apple-nco: Add "apple,t8103-nco" compatible
clk: versatile: impd1: Simplify with scoped for each OF child loop
clk: scpi: Simplify with scoped for each OF child loop
clk: lmk04832: Simplify with scoped for each OF child loop
* clk-spacemit:
clk: spacemit: k3: add the clock tree
clk: spacemit: k3: extract common header
clk: spacemit: ccu_pll: add plla type clock
clk: spacemit: ccu_mix: add inverted enable gate clock
dt-bindings: soc: spacemit: k3: add clock support
clk: spacemit: add platform SoC prefix to reset name
clk: spacemit: extract common ccu functions
reset: spacemit: fix auxiliary device id
clk: spacemit: prepare common ccu header
clk: spacemit: Hide common clock driver from user controller
clk: spacemit: Respect Kconfig setting when building modules
* clk-tegra:
clk: tegra30: Add CSI pad clock gates
clk: tegra: Set CSUS as vi_sensor's gate for Tegra20, Tegra30 and Tegra114
clk: tegra20: Reparent dsi clock to pll_d_out0
clk: tegra: tegra124-emc: Simplify with scoped for each OF child loop
clk: tegra: Adjust callbacks in tegra_clock_pm
clk: tegra: tegra124-emc: Fix potential memory leak in tegra124_clk_register_emc()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this development cycle, we focused on several key performance
optimizations:
- introducing large folio support to enhance read speeds for
immutable files
- reducing checkpoint=enable latency by flushing only committed dirty
pages
- implementing tracepoints to diagnose and resolve lock priority
inversion.
Additionally, we introduced the packed_ssa feature to optimize the SSA
footprint when utilizing large block sizes.
Detail summary:
Enhancements:
- support large folio for immutable non-compressed case
- support non-4KB block size without packed_ssa feature
- optimize f2fs_enable_checkpoint() to avoid long delay
- optimize f2fs_overwrite_io() for f2fs_iomap_begin
- optimize NAT block loading during checkpoint write
- add write latency stats for NAT and SIT blocks in
f2fs_write_checkpoint
- pin files do not require sbi->writepages lock for ordering
- avoid f2fs_map_blocks() for consecutive holes in readpages
- flush plug periodically during GC to maximize readahead effect
- add tracepoints to catch lock overheads
- add several sysfs entries to tune internal lock priorities
Fixes:
- fix lock priority inversion issue
- fix incomplete block usage in compact SSA summaries
- fix to show simulate_lock_timeout correctly
- fix to avoid mapping wrong physical block for swapfile
- fix IS_CHECKPOINTED flag inconsistency issue caused by
concurrent atomic commit and checkpoint writes
- fix to avoid UAF in f2fs_write_end_io()"
* tag 'f2fs-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (61 commits)
f2fs: sysfs: introduce critical_task_priority
f2fs: introduce trace_f2fs_priority_update
f2fs: fix lock priority inversion issue
f2fs: optimize f2fs_overwrite_io() for f2fs_iomap_begin
f2fs: fix incomplete block usage in compact SSA summaries
f2fs: decrease maximum flush retry count in f2fs_enable_checkpoint()
f2fs: optimize NAT block loading during checkpoint write
f2fs: change size parameter of __has_cursum_space() to unsigned int
f2fs: add write latency stats for NAT and SIT blocks in f2fs_write_checkpoint
f2fs: pin files do not require sbi->writepages lock for ordering
f2fs: fix to show simulate_lock_timeout correctly
f2fs: introduce FAULT_SKIP_WRITE
f2fs: check skipped write in f2fs_enable_checkpoint()
Revert "f2fs: add timeout in f2fs_enable_checkpoint()"
f2fs: fix to unlock folio in f2fs_read_data_large_folio()
f2fs: fix error path handling in f2fs_read_data_large_folio()
f2fs: use folio_end_read
f2fs: fix to avoid mapping wrong physical block for swapfile
f2fs: avoid f2fs_map_blocks() for consecutive holes in readpages
f2fs: advance index and offset after zeroing in large folio read
...
|
|
Replace "make this driver to fail" with "cause this driver to fail"
to correct the grammar.
Signed-off-by: Berke Antar <b@berkeantar.com>
Message-ID: <b9085090-e70f-46ac-aad0-96da1fc7cdcc@smtp-relay.sendinblue.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Correct several spelling and grammatical errors in the page tables
documentation. This includes:
- Fixing "a address" to "an address"
- Fixing "pfs" to "pfns"
- Correcting the possessive "Torvald's" to "Torvalds's"
- Fixing "instruction that want" to "instruction that wants"
- Fixing "code path" to "code paths"
Signed-off-by: Min-Hsun Chang <chmh0624@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260209145603.96664-1-chmh0624@gmail.com>
|
|
Correct minor typographical errors in the red-black tree documentation:
- Remove redundant "a" in the cached rbtrees section.
- Fix "updated" to "update" in the augmented rbtrees section.
- Fix "be looking" to "by looking" in the interval tree sample usage.
Signed-off-by: Min-Hsun Chang <chmh0624@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260210060829.42975-1-chmh0624@gmail.com>
|
|
Clarify that the Linux kernel is written in C and improve
punctuation in the clang sentence.
Signed-off-by: Ariful Islam Shoikot <islamarifulshoikat@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260214132842.1161-1-islamarifulshoikat@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig updates from Masami Hiramatsu:
- Update the bootconfig parser to stop searching for a value when it
encounters a newline character
- Update the tests for bootconfig parser to ensure the good examples to
be parsed correctly by comparing the expected results
* tag 'bootconfig-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: Check the parsed output of the good examples
bootconfig: Terminate value search if it hits a newline
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
"User visible changes:
- Add an entry into MAINTAINERS file for RUST versions of code
There's now RUST code for tracing and static branches. To
differentiate that code from the C code, add entries in for the
RUST version (with "[RUST]" around it) so that the right
maintainers get notified on changes.
- New bitmask-list option added to tracefs
When this is set, bitmasks in trace event are not displayed as hex
numbers, but instead as lists: e.g. 0-5,7,9 instead of 0000015f
- New show_event_filters file in tracefs
Instead of having to search all events/*/*/filter for any active
filters enabled in the trace instance, the file show_event_filters
will list them so that there's only one file that needs to be
examined to see if any filters are active.
- New show_event_triggers file in tracefs
Instead of having to search all events/*/*/trigger for any active
triggers enabled in the trace instance, the file
show_event_triggers will list them so that there's only one file
that needs to be examined to see if any triggers are active.
- Have traceoff_on_warning disable trace pintk buffer too
Recently recording of trace_printk() could go to other trace
instances instead of the top level instance. But if
traceoff_on_warning triggers, it doesn't stop the buffer with
trace_printk() and that data can easily be lost by being
overwritten. Have traceoff_on_warning also disable the instance
that has trace_printk() being written to it.
- Update the hist_debug file to show what function the field uses
When CONFIG_HIST_TRIGGERS_DEBUG is enabled, a hist_debug file
exists for every event. This displays the internal data of any
histogram enabled for that event. But it is lacking the function
that is called to process one of its fields. This is very useful
information that was missing when debugging histograms.
- Up the histogram stack size from 16 to 31
Stack traces can be used as keys for event histograms. Currently
the size of the stack that is stored is limited to just 16 entries.
But the storage space in the histogram is 256 bytes, meaning that
it can store up to 31 entries (plus one for the count of entries).
Instead of letting that space go to waste, up the limit from 16 to
31. This makes the keys much more useful.
- Fix permissions of per CPU file buffer_size_kb
The per CPU file of buffer_size_kb was incorrectly set to read only
in a previous cleanup. It should be writable.
- Reset "last_boot_info" if the persistent buffer is cleared
The last_boot_info shows address information of a persistent ring
buffer if it contains data from a previous boot. It is cleared when
recording starts again, but it is not cleared when the buffer is
reset. The data is useless after a reset so clear it on reset too.
Internal changes:
- A change was made to allow tracepoint callbacks to have preemption
enabled, and instead be protected by SRCU. This required some
updates to the callbacks for perf and BPF.
perf needed to disable preemption directly in its callback because
it expects preemption disabled in the later code.
BPF needed to disable migration, as its code expects to run
completely on the same CPU.
- Have irq_work wake up other CPU if current CPU is "isolated"
When there's a waiter waiting on ring buffer data and a new event
happens, an irq work is triggered to wake up that waiter. This is
noisy on isolated CPUs (running NO_HZ_FULL). Trigger an IPI to a
house keeping CPU instead.
- Use proper free of trigger_data instead of open coding it in.
- Remove redundant call of event_trigger_reset_filter()
It was called immediately in a function that was called right after
it.
- Workqueue cleanups
- Report errors if tracing_update_buffers() were to fail.
- Make the enum update workqueue generic for other parts of tracing
On boot up, a work queue is created to convert enum names into
their numbers in the trace event format files. This work queue can
also be used for other aspects of tracing that takes some time and
shouldn't be called by the init call code.
The blk_trace initialization takes a bit of time. Have the
initialization code moved to the new tracing generic work queue
function.
- Skip kprobe boot event creation call if there's no kprobes defined
on cmdline
The kprobe initialization to set up kprobes if they are defined on
the cmdline requires taking the event_mutex lock. This can be held
by other tracing code doing initialization for a long time. Since
kprobes added to the kernel command line need to be setup
immediately, as they may be tracing early initialization code, they
cannot be postponed in a work queue and must be setup in the
initcall code.
If there's no kprobe on the kernel cmdline, there's no reason to
take the mutex and slow down the boot up code waiting to get the
lock only to find out there's nothing to do. Simply exit out early
if there's no kprobes on the kernel cmdline.
If there are kprobes on the cmdline, then someone cares more about
tracing over the speed of boot up.
- Clean up the trigger code a bit
- Move code out of trace.c and into their own files
trace.c is now over 11,000 lines of code and has become more
difficult to maintain. Start splitting it up so that related code
is in their own files.
Move all the trace_printk() related code into trace_printk.c.
Move the __always_inline stack functions into trace.h.
Move the pid filtering code into a new trace_pid.c file.
- Better define the max latency and snapshot code
The latency tracers have a "max latency" buffer that is a copy of
the main buffer and gets swapped with it when a new high latency is
detected. This keeps the trace up to the highest latency around
where this max_latency buffer is never written to. It is only used
to save the last max latency trace.
A while ago a snapshot feature was added to tracefs to allow user
space to perform the same logic. It could also enable events to
trigger a "snapshot" if one of their fields hit a new high. This
was built on top of the latency max_latency buffer logic.
Because snapshots came later, they were dependent on the latency
tracers to be enabled. In reality, the latency tracers depend on
the snapshot code and not the other way around. It was just that
they came first.
Restructure the code and the kconfigs to have the latency tracers
depend on snapshot code instead. This actually simplifies the logic
a bit and allows to disable more when the latency tracers are not
defined and the snapshot code is.
- Fix a "false sharing" in the hwlat tracer code
The loop to search for latency in hardware was using a variable
that could be changed by user space for each sample. If the user
change this variable, it could cause a bus contention, and reading
that variable can show up as a large latency in the trace causing a
false positive. Read this variable at the start of the sample with
a READ_ONCE() into a local variable and keep the code from sharing
cache lines with readers.
- Fix function graph tracer static branch optimization code
When only one tracer is defined for function graph tracing, it uses
a static branch to call that tracer directly. When another tracer
is added, it goes into loop logic to call all the registered
callbacks.
The code was incorrect when going back to one tracer and never
re-enabled the static branch again to do the optimization code.
- And other small fixes and cleanups"
* tag 'trace-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (46 commits)
function_graph: Restore direct mode when callbacks drop to one
tracing: Fix indentation of return statement in print_trace_fmt()
tracing: Reset last_boot_info if ring buffer is reset
tracing: Fix to set write permission to per-cpu buffer_size_kb
tracing: Fix false sharing in hwlat get_sample()
tracing: Move d_max_latency out of CONFIG_FSNOTIFY protection
tracing: Better separate SNAPSHOT and MAX_TRACE options
tracing: Add tracer_uses_snapshot() helper to remove #ifdefs
tracing: Rename trace_array field max_buffer to snapshot_buffer
tracing: Move pid filtering into trace_pid.c
tracing: Move trace_printk functions out of trace.c and into trace_printk.c
tracing: Use system_state in trace_printk_init_buffers()
tracing: Have trace_printk functions use flags instead of using global_trace
tracing: Make tracing_update_buffers() take NULL for global_trace
tracing: Make printk_trace global for tracing system
tracing: Move ftrace_trace_stack() out of trace.c and into trace.h
tracing: Move __trace_buffer_{un}lock_*() functions to trace.h
tracing: Make tracing_selftest_running global to the tracing subsystem
tracing: Make tracing_disabled global for tracing system
tracing: Clean up use of trace_create_maxlat_file()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
"Highlights:
- amd/pmf:
- Avoid overwriting BIOS input values when events occur rapidly
- Fix PMF driver issues related to S4 (in part on crypto/ccp side)
- Add NPU metrics API (for accel side consumers)
- Allow disabling Smart PC function through a module parameter
- asus-wmi & HID/asus:
- Unification of backlight control (replaces quirks)
- Support multiple interfaces for controlling keyboard/RGB brightness
- Simplify init sequence
- hp-wmi:
- Add manual fan control for Victus S models
- Add fan mode keep-alive
- Fix platform profile values for Omen 16-wf1xxx
- Add EC offset to get the thermal profile
- intel/pmc: Show substate residencies also for non-primary PMCs
- intel/ISST:
- Store and restore data for all domains
- Write interface improvements
- lenovo-wmi:
- Support multiple Capability Data
- Add HWMON reporting and tuning support
- mellanox/mlx-platform: Add HI173 & HI174 support
- surface/aggregator_registry: Add Surface Pro 11 (QCOM)
- thinkpad_acpi: Add support for HW damage detection capability
- uniwill: Implement cTGP setting
- wmi:
- Introduce marshalling support
- Convert a few drivers to use the new buffer-based WMI API
- tools/power/x86/intel-speed-select: Allow read operations for non-root
- Miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (68 commits)
platform/x86: lenovo-wmi-{capdata,other}: Fix HWMON channel visibility
platform/x86: hp-wmi: Add EC offsets to read Victus S thermal profile
platform: mellanox: mlx-platform: Add support DGX flavor of next-generation 800GB/s ethernet switch.
platform: mellanox: mlx-platform: Add support for new Nvidia DGX system based on class VMOD0010
HID: asus: add support for the asus-wmi brightness handler
platform/x86: asus-wmi: add keyboard brightness event handler
platform/x86: asus-wmi: remove unused keyboard backlight quirk
HID: asus: listen to the asus-wmi brightness device instead of creating one
platform/x86: asus-wmi: Add support for multiple kbd led handlers
HID: asus: early return for ROG devices
HID: asus: move vendor initialization to probe
HID: asus: fortify keyboard handshake
HID: asus: use same report_id in response
HID: asus: initialize additional endpoints only for certain devices
HID: asus: simplify RGB init sequence
platform/wmi: string-kunit: Add missing oversized string test case
platform/x86/amd/pmf: Added a module parameter to disable the Smart PC function
platform/x86/uniwill: Implement cTGP setting
platform/x86: uniwill-laptop: Introduce device descriptor system
platform/x86/amd: Use scope-based cleanup for wbrf_record()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD:
- prioritize ofpart in physmap-core probing
- conversions to scoped for each OF child loops
Bindings:
- The bulk of the changes consists of binding fixes/updates to
restrict the use of undefined properties, which was mostly
ineffective in the current form because of the nesting of partition
nodes and the lack of compatible strings
- YAML conversions and the addition of a dma-coherent property in the
cdns,hp-nfc driver
SPI NAND:
- support for octal DTR modes (8D-8D-8D)
- support for Foresee F35SQB002G chips
And small misc fixes"
* tag 'mtd/for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (65 commits)
mtd: spi-nor: hisi-sfc: fix refcounting bug in hisi_spi_nor_register_all()
mtd: spinand: fix NULL pointer dereference in spinand_support_vendor_ops()
mtd: rawnand: pl353: Add message about ECC mode
mtd: rawnand: pl353: Fix software ECC support
mtd: spinand: winbond: Remove unneeded semicolon
dt-bindings: mtd: cdns,hp-nfc: Add dma-coherent property
mtd: spinand: Disable continuous read during probe
mtd: spinand: add Foresee F35SQB002G flash support
mtd: spinand: winbond: W35N octal DTR support
mtd: spinand: Add octal DTR support
mtd: spinand: Warn if using SSDR-only vendor commands in a non SSDR mode
mtd: spinand: Give the bus interface to the configuration helper
mtd: spinand: Propagate the bus interface across core helpers
mtd: spinand: Add support for setting a bus interface
mtd: spinand: Gather all the bus interface steps in one single function
mtd: spinand: winbond: Configure the IO mode after the dummy cycles
mtd: spinand: winbond: Rename IO_MODE register macro
mtd: spinand: winbond: Fix style
mtd: spinand: winbond: Register W35N vendor specific operation
mtd: spinand: winbond: Register W25N vendor specific operation
...
|
|
The LT9611 has two DSI input ports (Port A and Port B). Update the
binding to clearly document the port mapping and allow using Port B
alone when DSI is physically connected to Port B only.
Changes:
- Clarify port@0 corresponds to DSI Port A input
- Clarify port@1 corresponds to DSI Port B input
- Change port requirement from mandatory port@0 to anyOf port@0/port@1,
allowing either port to be used independently
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Hongyang Zhao <hongyang.zhao@thundersoft.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Roger Shimizu <rosh@debian.org>
Tested-by: Roger Shimizu <rosh@debian.org>
Link: https://patch.msgid.link/20260207-rubikpi-next-20260116-v3-1-23b9aa189a3a@thundersoft.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Pull virtio updates from Michael Tsirkin:
- in-order support in virtio core
- multiple address space support in vduse
- fixes, cleanups all over the place, notably dma alignment fixes for
non-cache-coherent systems
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (59 commits)
vduse: avoid adding implicit padding
vhost: fix caching attributes of MMIO regions by setting them explicitly
vdpa/mlx5: update MAC address handling in mlx5_vdpa_set_attr()
vdpa/mlx5: reuse common function for MAC address updates
vdpa/mlx5: update mlx_features with driver state check
crypto: virtio: Replace package id with numa node id
crypto: virtio: Remove duplicated virtqueue_kick in virtio_crypto_skcipher_crypt_req
crypto: virtio: Add spinlock protection with virtqueue notification
Documentation: Add documentation for VDUSE Address Space IDs
vduse: bump version number
vduse: add vq group asid support
vduse: merge tree search logic of IOTLB_GET_FD and IOTLB_GET_INFO ioctls
vduse: take out allocations from vduse_dev_alloc_coherent
vduse: remove unused vaddr parameter of vduse_domain_free_coherent
vduse: refactor vdpa_dev_add for goto err handling
vhost: forbid change vq groups ASID if DRIVER_OK is set
vdpa: document set_group_asid thread safety
vduse: return internal vq group struct as map token
vduse: add vq group support
vduse: add v1 API definition
...
|
|
Pull KVM updates from Paolo Bonzini:
"Loongarch:
- Add more CPUCFG mask bits
- Improve feature detection
- Add lazy load support for FPU and binary translation (LBT) register
state
- Fix return value for memory reads from and writes to in-kernel
devices
- Add support for detecting preemption from within a guest
- Add KVM steal time test case to tools/selftests
ARM:
- Add support for FEAT_IDST, allowing ID registers that are not
implemented to be reported as a normal trap rather than as an UNDEF
exception
- Add sanitisation of the VTCR_EL2 register, fixing a number of
UXN/PXN/XN bugs in the process
- Full handling of RESx bits, instead of only RES0, and resulting in
SCTLR_EL2 being added to the list of sanitised registers
- More pKVM fixes for features that are not supposed to be exposed to
guests
- Make sure that MTE being disabled on the pKVM host doesn't give it
the ability to attack the hypervisor
- Allow pKVM's host stage-2 mappings to use the Force Write Back
version of the memory attributes by using the "pass-through'
encoding
- Fix trapping of ICC_DIR_EL1 on GICv5 hosts emulating GICv3 for the
guest
- Preliminary work for guest GICv5 support
- A bunch of debugfs fixes, removing pointless custom iterators
stored in guest data structures
- A small set of FPSIMD cleanups
- Selftest fixes addressing the incorrect alignment of page
allocation
- Other assorted low-impact fixes and spelling fixes
RISC-V:
- Fixes for issues discoverd by KVM API fuzzing in
kvm_riscv_aia_imsic_has_attr(), kvm_riscv_aia_imsic_rw_attr(), and
kvm_riscv_vcpu_aia_imsic_update()
- Allow Zalasr, Zilsd and Zclsd extensions for Guest/VM
- Transparent huge page support for hypervisor page tables
- Adjust the number of available guest irq files based on MMIO
register sizes found in the device tree or the ACPI tables
- Add RISC-V specific paging modes to KVM selftests
- Detect paging mode at runtime for selftests
s390:
- Performance improvement for vSIE (aka nested virtualization)
- Completely new memory management. s390 was a special snowflake that
enlisted help from the architecture's page table management to
build hypervisor page tables, in particular enabling sharing the
last level of page tables. This however was a lot of code (~3K
lines) in order to support KVM, and also blocked several features.
The biggest advantages is that the page size of userspace is
completely independent of the page size used by the guest:
userspace can mix normal pages, THPs and hugetlbfs as it sees fit,
and in fact transparent hugepages were not possible before. It's
also now possible to have nested guests and guests with huge pages
running on the same host
- Maintainership change for s390 vfio-pci
- Small quality of life improvement for protected guests
x86:
- Add support for giving the guest full ownership of PMU hardware
(contexted switched around the fastpath run loop) and allowing
direct access to data MSRs and PMCs (restricted by the vPMU model).
KVM still intercepts access to control registers, e.g. to enforce
event filtering and to prevent the guest from profiling sensitive
host state. This is more accurate, since it has no risk of
contention and thus dropped events, and also has significantly less
overhead.
For more information, see the commit message for merge commit
bf2c3138ae36 ("Merge tag 'kvm-x86-pmu-6.20' ...")
- Disallow changing the virtual CPU model if L2 is active, for all
the same reasons KVM disallows change the model after the first
KVM_RUN
- Fix a bug where KVM would incorrectly reject host accesses to PV
MSRs when running with KVM_CAP_ENFORCE_PV_FEATURE_CPUID enabled,
even if those were advertised as supported to userspace,
- Fix a bug with protected guest state (SEV-ES/SNP and TDX) VMs,
where KVM would attempt to read CR3 configuring an async #PF entry
- Fail the build if EXPORT_SYMBOL_GPL or EXPORT_SYMBOL is used in KVM
(for x86 only) to enforce usage of EXPORT_SYMBOL_FOR_KVM_INTERNAL.
Only a few exports that are intended for external usage, and those
are allowed explicitly
- When checking nested events after a vCPU is unblocked, ignore
-EBUSY instead of WARNing. Userspace can sometimes put the vCPU
into what should be an impossible state, and spurious exit to
userspace on -EBUSY does not really do anything to solve the issue
- Also throw in the towel and drop the WARN on INIT/SIPI being
blocked when vCPU is in Wait-For-SIPI, which also resulted in
playing whack-a-mole with syzkaller stuffing architecturally
impossible states into KVM
- Add support for new Intel instructions that don't require anything
beyond enumerating feature flags to userspace
- Grab SRCU when reading PDPTRs in KVM_GET_SREGS2
- Add WARNs to guard against modifying KVM's CPU caps outside of the
intended setup flow, as nested VMX in particular is sensitive to
unexpected changes in KVM's golden configuration
- Add a quirk to allow userspace to opt-in to actually suppress EOI
broadcasts when the suppression feature is enabled by the guest
(currently limited to split IRQCHIP, i.e. userspace I/O APIC).
Sadly, simply fixing KVM to honor Suppress EOI Broadcasts isn't an
option as some userspaces have come to rely on KVM's buggy behavior
(KVM advertises Supress EOI Broadcast irrespective of whether or
not userspace I/O APIC supports Directed EOIs)
- Clean up KVM's handling of marking mapped vCPU pages dirty
- Drop a pile of *ancient* sanity checks hidden behind in KVM's
unused ASSERT() macro, most of which could be trivially triggered
by the guest and/or user, and all of which were useless
- Fold "struct dest_map" into its sole user, "struct rtc_status", to
make it more obvious what the weird parameter is used for, and to
allow fropping these RTC shenanigans if CONFIG_KVM_IOAPIC=n
- Bury all of ioapic.h, i8254.h and related ioctls (including
KVM_CREATE_IRQCHIP) behind CONFIG_KVM_IOAPIC=y
- Add a regression test for recent APICv update fixes
- Handle "hardware APIC ISR", a.k.a. SVI, updates in
kvm_apic_update_apicv() to consolidate the updates, and to
co-locate SVI updates with the updates for KVM's own cache of ISR
information
- Drop a dead function declaration
- Minor cleanups
x86 (Intel):
- Rework KVM's handling of VMCS updates while L2 is active to
temporarily switch to vmcs01 instead of deferring the update until
the next nested VM-Exit.
The deferred updates approach directly contributed to several bugs,
was proving to be a maintenance burden due to the difficulty in
auditing the correctness of deferred updates, and was polluting
"struct nested_vmx" with a growing pile of booleans
- Fix an SGX bug where KVM would incorrectly try to handle EPCM page
faults, and instead always reflect them into the guest. Since KVM
doesn't shadow EPCM entries, EPCM violations cannot be due to KVM
interference and can't be resolved by KVM
- Fix a bug where KVM would register its posted interrupt wakeup
handler even if loading kvm-intel.ko ultimately failed
- Disallow access to vmcb12 fields that aren't fully supported,
mostly to avoid weirdness and complexity for FRED and other
features, where KVM wants enable VMCS shadowing for fields that
conditionally exist
- Print out the "bad" offsets and values if kvm-intel.ko refuses to
load (or refuses to online a CPU) due to a VMCS config mismatch
x86 (AMD):
- Drop a user-triggerable WARN on nested_svm_load_cr3() failure
- Add support for virtualizing ERAPS. Note, correct virtualization of
ERAPS relies on an upcoming, publicly announced change in the APM
to reduce the set of conditions where hardware (i.e. KVM) *must*
flush the RAP
- Ignore nSVM intercepts for instructions that are not supported
according to L1's virtual CPU model
- Add support for expedited writes to the fast MMIO bus, a la VMX's
fastpath for EPT Misconfig
- Don't set GIF when clearing EFER.SVME, as GIF exists independently
of SVM, and allow userspace to restore nested state with GIF=0
- Treat exit_code as an unsigned 64-bit value through all of KVM
- Add support for fetching SNP certificates from userspace
- Fix a bug where KVM would use vmcb02 instead of vmcb01 when
emulating VMLOAD or VMSAVE on behalf of L2
- Misc fixes and cleanups
x86 selftests:
- Add a regression test for TPR<=>CR8 synchronization and IRQ masking
- Overhaul selftest's MMU infrastructure to genericize stage-2 MMU
support, and extend x86's infrastructure to support EPT and NPT
(for L2 guests)
- Extend several nested VMX tests to also cover nested SVM
- Add a selftest for nested VMLOAD/VMSAVE
- Rework the nested dirty log test, originally added as a regression
test for PML where KVM logged L2 GPAs instead of L1 GPAs, to
improve test coverage and to hopefully make the test easier to
understand and maintain
guest_memfd:
- Remove kvm_gmem_populate()'s preparation tracking and half-baked
hugepage handling. SEV/SNP was the only user of the tracking and it
can do it via the RMP
- Retroactively document and enforce (for SNP) that
KVM_SEV_SNP_LAUNCH_UPDATE and KVM_TDX_INIT_MEM_REGION require the
source page to be 4KiB aligned, to avoid non-trivial complexity for
something that no known VMM seems to be doing and to avoid an API
special case for in-place conversion, which simply can't support
unaligned sources
- When populating guest_memfd memory, GUP the source page in common
code and pass the refcounted page to the vendor callback, instead
of letting vendor code do the heavy lifting. Doing so avoids a
looming deadlock bug with in-place due an AB-BA conflict betwee
mmap_lock and guest_memfd's filemap invalidate lock
Generic:
- Fix a bug where KVM would ignore the vCPU's selected address space
when creating a vCPU-specific mapping of guest memory. Actually
this bug could not be hit even on x86, the only architecture with
multiple address spaces, but it's a bug nevertheless"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (267 commits)
KVM: s390: Increase permitted SE header size to 1 MiB
MAINTAINERS: Replace backup for s390 vfio-pci
KVM: s390: vsie: Fix race in acquire_gmap_shadow()
KVM: s390: vsie: Fix race in walk_guest_tables()
KVM: s390: Use guest address to mark guest page dirty
irqchip/riscv-imsic: Adjust the number of available guest irq files
RISC-V: KVM: Transparent huge page support
RISC-V: KVM: selftests: Add Zalasr extensions to get-reg-list test
RISC-V: KVM: Allow Zalasr extensions for Guest/VM
KVM: riscv: selftests: Add riscv vm satp modes
KVM: riscv: selftests: add Zilsd and Zclsd extension to get-reg-list test
riscv: KVM: allow Zilsd and Zclsd extensions for Guest/VM
RISC-V: KVM: Skip IMSIC update if vCPU IMSIC state is not initialized
RISC-V: KVM: Fix null pointer dereference in kvm_riscv_aia_imsic_rw_attr()
RISC-V: KVM: Fix null pointer dereference in kvm_riscv_aia_imsic_has_attr()
RISC-V: KVM: Remove unnecessary 'ret' assignment
KVM: s390: Add explicit padding to struct kvm_s390_keyop
KVM: LoongArch: selftests: Add steal time test case
LoongArch: KVM: Add paravirt vcpu_is_preempted() support in guest side
LoongArch: KVM: Add paravirt preempt feature in hypervisor side
...
|
|
SPI NAND
- The major feature this release is the support for octal DTR
modes (8D-8D-8D).
- There has been as well a series of conversion to scoped for each OF
child loops.
- Support for Foresee F35SQB002G chips has been added.
Other changes are small fixes.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
- Add support for control flow integrity for userspace processes.
This is based on the standard RISC-V ISA extensions Zicfiss and
Zicfilp
- Improve ptrace behavior regarding vector registers, and add some
selftests
- Optimize our strlen() assembly
- Enable the ISO-8859-1 code page as built-in, similar to ARM64, for
EFI volume mounting
- Clean up some code slightly, including defining copy_user_page() as
copy_page() rather than memcpy(), aligning us with other
architectures; and using max3() to slightly simplify an expression
in riscv_iommu_init_check()
* tag 'riscv-for-linus-7.0-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits)
riscv: lib: optimize strlen loop efficiency
selftests: riscv: vstate_exec_nolibc: Use the regular prctl() function
selftests: riscv: verify ptrace accepts valid vector csr values
selftests: riscv: verify ptrace rejects invalid vector csr inputs
selftests: riscv: verify syscalls discard vector context
selftests: riscv: verify initial vector state with ptrace
selftests: riscv: test ptrace vector interface
riscv: ptrace: validate input vector csr registers
riscv: csr: define vtype register elements
riscv: vector: init vector context with proper vlenb
riscv: ptrace: return ENODATA for inactive vector extension
kselftest/riscv: add kselftest for user mode CFI
riscv: add documentation for shadow stack
riscv: add documentation for landing pad / indirect branch tracking
riscv: create a Kconfig fragment for shadow stack and landing pad support
arch/riscv: add dual vdso creation logic and select vdso based on hw
arch/riscv: compile vdso with landing pad and shadow stack note
riscv: enable kernel access to shadow stack memory via the FWFT SBI call
riscv: add kernel command line option to opt out of user CFI
riscv/hwprobe: add zicfilp / zicfiss enumeration in hwprobe
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"power-supply core:
- sysfs: constify pointer passed to dev_attr_psp
- extend DT binding documentation for battery cells to allow
describing voltage drop behaviour
power-supply drivers:
- multiple: Remove unused gpio include header
- multiple: Fix potential IRQ use-after-free on driver unload
- bd71828: Add support for ROHM BD72720
- misc small fixes
reset drivers:
- tdx-ec-poweroff: fix restart"
* tag 'for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (30 commits)
power: supply: bd71828: Use dev_err_probe()
dt-bindings: power: supply: google,goldfish-battery: Convert to DT schema
power: supply: qcom_battmgr: Recognize "LiP" as lithium-polymer
power: supply: wm97xx: Use devm_power_supply_register()
power: supply: wm97xx: Use devm_kcalloc()
power: supply: pm8916_lbc: Fix use-after-free for extcon in IRQ handler
power: reset: tdx-ec-poweroff: fix restart
docs: power: update documentation about removed function
power: supply: wm97xx: Fix NULL pointer dereference in power_supply_changed()
MAINTAINERS: adjust file entry in ROHM BD71828 CHARGER
power: supply: ab8500_chargalg: improve kernel-doc
power: supply: sysfs: Constify pointer passed to dev_attr_psp()
power: supply: bq27xxx: fix wrong errno when bus ops are unsupported
power: reset: nvmem-reboot-mode: respect cell size for nvmem_cell_write
power: supply: sbs-battery: Fix use-after-free in power_supply_changed()
power: supply: rt9455: Fix use-after-free in power_supply_changed()
power: supply: pm8916_lbc: Fix use-after-free in power_supply_changed()
power: supply: pm8916_bms_vm: Fix use-after-free in power_supply_changed()
power: supply: pf1550: Fix use-after-free in power_supply_changed()
power: supply: goldfish: Fix use-after-free in power_supply_changed()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ATA updates from Damien Le Moal:
- Cleanup IRQ masking in the handling of completed report zones
commands (Niklas)
- Improve the handling of Thunderbolt attached devices to speed up
device removal (Henry)
- Several patches to generalize the existing max_sec quirks to
facilitates quirking the maximum command size of buggy drives, many
of which have recently showed up with the recent increase of the
default max_sectors block limit (Niklas)
- Cleanup the ahci-platform and sata dt-bindings schema (Rob,
Manivannan)
- Improve device node scan in the ahci-dwc driver (Krzysztof)
- Remove clang W=1 warnings with the ahci-imx and ahci-xgene drivers
(Krzysztof)
- Fix a long standing potential command starvation situation with
non-NCQ commands issued when NCQ commands are on-going (me)
- Limit max_sectors to 8191 on the INTEL SSDSC2KG480G8 SSD (Niklas)
- Remove Vesa Local Bus (VLB) support in the pata_legacy driver (Ethan)
- Simple fixes in the pata_cypress (typo) and pata_ftide010 (timing)
drivers (Ethan, Linus W)
* tag 'ata-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: pata_ftide010: Fix some DMA timings
ata: pata_cypress: fix typo in error message
ata: pata_legacy: remove VLB support
ata: libata-core: Quirk INTEL SSDSC2KG480G8 max_sectors
dt-bindings: ata: sata: Document the graph port
ata: libata-scsi: avoid Non-NCQ command starvation
ata: libata-scsi: refactor ata_scsi_translate()
ata: ahci-xgene: Fix Wvoid-pointer-to-enum-cast warning
ata: ahci-imx: Fix Wvoid-pointer-to-enum-cast warning
ata: ahci-dwc: Simplify with scoped for each OF child loop
dt-bindings: ata: ahci-platform: Drop unnecessary select schema
ata: libata: Allow more quirks
ata: libata: Add libata.force parameter max_sec
ata: libata: Add support to parse equal sign in libata.force
ata: libata: Change libata.force to use the generic ATA_QUIRK_MAX_SEC quirk
ata: libata: Add ata_force_get_fe_for_dev() helper
ata: libata: Add ATA_QUIRK_MAX_SEC and convert all device quirks
ata: libata: avoid long timeouts on hot-unplugged SATA DAS
ata: libata-scsi: Remove superfluous local_irq_save()
|
|
Pull CXL updates from Dave Jiang:
- Introduce cxl_memdev_attach and pave way for soft reserved handling,
type2 accelerator enabling, and LSA 2.0 enabling. All these series
require the endpoint driver to settle before continuing the memdev
driver probe.
- Address CXL port error protocol handling and reporting.
The large patch series was split into three parts. The first two
parts are included here with the final part coming later.
The first part consists of a series of code refactoring to PCI AER
sub-system that addresses CXL and also CXL RAS code to prepare for
port error handling.
The second part refactors the CXL code to move management of
component registers to cxl_port objects to allow all CXL AER errors
to be handled through the cxl_port hierarchy.
- Provide AMD Zen5 platform address translation for CXL using ACPI
PRMT. This includes a conventions document to explain why this is
needed and how it's implemented.
- Misc CXL patches of fixes, cleanups, and updates. Including CXL
address translation for unaligned MOD3 regions.
[ TLA service: CXL is "Compute Express Link" ]
* tag 'cxl-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (59 commits)
cxl: Disable HPA/SPA translation handlers for Normalized Addressing
cxl/region: Factor out code into cxl_region_setup_poison()
cxl/atl: Lock decoders that need address translation
cxl: Enable AMD Zen5 address translation using ACPI PRMT
cxl/acpi: Prepare use of EFI runtime services
cxl: Introduce callback for HPA address ranges translation
cxl/region: Use region data to get the root decoder
cxl/region: Add @hpa_range argument to function cxl_calc_interleave_pos()
cxl/region: Separate region parameter setup and region construction
cxl: Simplify cxl_root_ops allocation and handling
cxl/region: Store HPA range in struct cxl_region
cxl/region: Store root decoder in struct cxl_region
cxl/region: Rename misleading variable name @hpa to @hpa_range
Documentation/driver-api/cxl: ACPI PRM Address Translation Support and AMD Zen5 enablement
cxl, doc: Moving conventions in separate files
cxl, doc: Remove isonum.txt inclusion
cxl/port: Unify endpoint and switch port lookup
cxl/port: Move endpoint component register management to cxl_port
cxl/port: Map Port RAS registers
cxl/port: Move dport RAS setup to dport add time
...
|
|
Pull SCSI updates from James Bottomley:
"Usual driver updates (qla2xxx, mpi3mr, mpt3sas, ufs) plus assorted
cleanups and fixes.
The biggest core change is the massive code motion in the sd driver to
remove forward declarations and the most significant change is to
enumify the queuecommand return"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (78 commits)
scsi: csiostor: Fix dereference of null pointer rn
scsi: buslogic: Reduce stack usage
scsi: ufs: host: mediatek: Require CONFIG_PM
scsi: ufs: mediatek: Fix page faults in ufs_mtk_clk_scale() trace event
scsi: smartpqi: Fix memory leak in pqi_report_phys_luns()
scsi: mpi3mr: Make driver probing asynchronous
scsi: ufs: core: Flush exception handling work when RPM level is zero
scsi: efct: Use IRQF_ONESHOT and default primary handler
scsi: ufs: core: Use a host-wide tagset in SDB mode
scsi: qla2xxx: target: Add WQ_PERCPU to alloc_workqueue() users
scsi: qla2xxx: Add WQ_PERCPU to alloc_workqueue() users
scsi: qla4xxx: Add WQ_PERCPU to alloc_workqueue() users
scsi: mpi3mr: Driver version update to 8.17.0.3.50
scsi: mpi3mr: Fixed the W=1 compilation warning
scsi: mpi3mr: Record and report controller firmware faults
scsi: mpi3mr: Update MPI Headers to revision 39
scsi: mpi3mr: Use negotiated link rate from DevicePage0
scsi: mpi3mr: Avoid redundant diag-fault resets
scsi: mpi3mr: Rename log data save helper to reflect threaded/BH context
scsi: mpi3mr: Add module parameter to control threaded IRQ polling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull RTLA updates from Steven Rostedt:
- Remove unused function declarations
Some functions were removed in recent code consolidation 6.18, but
their prototypes were not removed from headers. Remove them.
- Set stop threshold after enabling instances
Prefer recording samples without stopping on them on the start of
tracing to stopping on samples that are never recorded. This fixes
flakiness of some RTLA tests and unifies behavior of sample
collection between tracefs mode and BPF mode.
- Consolidate usage help message implementation
RTLA tools (osnoise-top, osnoise-hist, timerlat-top, timerlat-hist)
each implement usage help individually. Move common logic between
them into a new function to reduce code duplication.
- Add BPF actions feature
Add option --bpf-action to attach a BPF program (passed as filename
of its ELF representation) to be executed via BPF tail call at
latency threshold.
- Consolidate command line option parsing
Each RTLA tool implements the parsing of command line options
individually. Now that we have a common structure for parameters,
unify the parsing of those options common among all four tools into
one function.
- De-duplicate cgroup common code
Two functions in utils.c, setting cgroup for comm and setting cgroup
for pid, duplicate code for constructing the cgroup path. Extract it
to a new helper function.
- String and error handling fixes and cleanups
There were several instances of unsafe string and error handling that
could cause invalid memory access; fix them. Also, remove a few
unused headers, update .gitignore, and deduplicate code.
* tag 'trace-rtla-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (30 commits)
rtla: Fix parse_cpu_set() bug introduced by strtoi()
rtla: Fix parse_cpu_set() return value documentation
rtla: Ensure null termination after read operations in utils.c
rtla: Make stop_tracing variable volatile
rtla: Add generated output files to gitignore
rtla: Fix NULL pointer dereference in actions_parse
rtla: Remove unused headers
rtla: Remove redundant memset after calloc
rtla: Use standard exit codes for result enum
rtla: Replace atoi() with a robust strtoi()
rtla: Introduce for_each_action() helper
tools/rtla: Deduplicate cgroup path opening code
tools/rtla: Consolidate -H/--house-keeping option parsing
tools/rtla: Consolidate -P/--priority option parsing
tools/rtla: Consolidate -e/--event option parsing
tools/rtla: Consolidate -d/--duration option parsing
tools/rtla: Consolidate -D/--debug option parsing
tools/rtla: Consolidate -C/--cgroup option parsing
tools/rtla: Consolidate -c/--cpus option parsing
tools/rtla: Add common_parse_options()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull runtime verifier updates from Steven Rostedt:
- Refactor da_monitor to minimize macros
Complete refactor of da_monitor.h to reduce reliance on macros
generating functions. Use generic static functions and uses the
preprocessor only when strictly necessary (e.g. for tracepoint
handlers).
The change essentially relies on functions with generic names (e.g.
da_handle) instead of monitor-specific as well adding the need to
define constant (e.g. MONITOR_NAME, MONITOR_TYPE) before including
the header rather than calling macros that would define functions.
Also adapt monitors and documentation accordingly.
- Cleanup DA code generation scripts
Clean up functions in dot2c removing reimplementations of trivial
library functions (__buff_to_string) and removing some other unused
intermediate steps.
- Annotate functions with types in the rvgen python scripts
- Remove superfluous assignments and cleanup generated code
The rvgen scripts generate a superfluous assignment to 0 for enum
variables and don't add commas to the last elements, which is against
the kernel coding standards. Change the generation process for a
better compliance and slightly simpler logic.
- Remove superfluous declarations from generated code
The monitor container source files contained a declaration and a
definition for the rv_monitor variable. The former is superfluous and
was removed.
- Fix reference to outdated documentation
s/da_monitor_synthesis.rst/monitor_synthesis.rst in comment in
da_monitor.h
* tag 'trace-rv-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix documentation reference in da_monitor.h
verification/rvgen: Remove unused variable declaration from containers
verification/dot2c: Remove superfluous enum assignment and add last comma
verification/dot2c: Remove __buff_to_string() and cleanup
verification/rvgen: Annotate DA functions with types
verification/rvgen: Adapt dot2k and templates after refactoring da_monitor.h
Documentation/rv: Adapt documentation after da_monitor refactoring
rv: Cleanup da_monitor after refactor
rv: Refactor da_monitor to minimise macros
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "powerpc/64s: do not re-activate batched TLB flush" makes
arch_{enter|leave}_lazy_mmu_mode() nest properly (Alexander Gordeev)
It adds a generic enter/leave layer and switches architectures to use
it. Various hacks were removed in the process.
- "zram: introduce compressed data writeback" implements data
compression for zram writeback (Richard Chang and Sergey Senozhatsky)
- "mm: folio_zero_user: clear page ranges" adds clearing of contiguous
page ranges for hugepages. Large improvements during demand faulting
are demonstrated (David Hildenbrand)
- "memcg cleanups" tidies up some memcg code (Chen Ridong)
- "mm/damon: introduce {,max_}nr_snapshots and tracepoint for damos
stats" improves DAMOS stat's provided information, deterministic
control, and readability (SeongJae Park)
- "selftests/mm: hugetlb cgroup charging: robustness fixes" fixes a few
issues in the hugetlb cgroup charging selftests (Li Wang)
- "Fix va_high_addr_switch.sh test failure - again" addresses several
issues in the va_high_addr_switch test (Chunyu Hu)
- "mm/damon/tests/core-kunit: extend existing test scenarios" improves
the KUnit test coverage for DAMON (Shu Anzai)
- "mm/khugepaged: fix dirty page handling for MADV_COLLAPSE" fixes a
glitch in khugepaged which was causing madvise(MADV_COLLAPSE) to
transiently return -EAGAIN (Shivank Garg)
- "arch, mm: consolidate hugetlb early reservation" reworks and
consolidates a pile of straggly code related to reservation of
hugetlb memory from bootmem and creation of CMA areas for hugetlb
(Mike Rapoport)
- "mm: clean up anon_vma implementation" cleans up the anon_vma
implementation in various ways (Lorenzo Stoakes)
- "tweaks for __alloc_pages_slowpath()" does a little streamlining of
the page allocator's slowpath code (Vlastimil Babka)
- "memcg: separate private and public ID namespaces" cleans up the
memcg ID code and prevents the internal-only private IDs from being
exposed to userspace (Shakeel Butt)
- "mm: hugetlb: allocate frozen gigantic folio" cleans up the
allocation of frozen folios and avoids some atomic refcount
operations (Kefeng Wang)
- "mm/damon: advance DAMOS-based LRU sorting" improves DAMOS's movement
of memory betewwn the active and inactive LRUs and adds auto-tuning
of the ratio-based quotas and of monitoring intervals (SeongJae Park)
- "Support page table check on PowerPC" makes
CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc (Andrew Donnellan)
- "nodemask: align nodes_and{,not} with underlying bitmap ops" makes
nodes_and() and nodes_andnot() propagate the return values from the
underlying bit operations, enabling some cleanup in calling code
(Yury Norov)
- "mm/damon: hide kdamond and kdamond_lock from API callers" cleans up
some DAMON internal interfaces (SeongJae Park)
- "mm/khugepaged: cleanups and scan limit fix" does some cleanup work
in khupaged and fixes a scan limit accounting issue (Shivank Garg)
- "mm: balloon infrastructure cleanups" goes to town on the balloon
infrastructure and its page migration function. Mainly cleanups, also
some locking simplification (David Hildenbrand)
- "mm/vmscan: add tracepoint and reason for kswapd_failures reset" adds
additional tracepoints to the page reclaim code (Jiayuan Chen)
- "Replace wq users and add WQ_PERCPU to alloc_workqueue() users" is
part of Marco's kernel-wide migration from the legacy workqueue APIs
over to the preferred unbound workqueues (Marco Crivellari)
- "Various mm kselftests improvements/fixes" provides various unrelated
improvements/fixes for the mm kselftests (Kevin Brodsky)
- "mm: accelerate gigantic folio allocation" greatly speeds up gigantic
folio allocation, mainly by avoiding unnecessary work in
pfn_range_valid_contig() (Kefeng Wang)
- "selftests/damon: improve leak detection and wss estimation
reliability" improves the reliability of two of the DAMON selftests
(SeongJae Park)
- "mm/damon: cleanup kdamond, damon_call(), damos filter and
DAMON_MIN_REGION" does some cleanup work in the core DAMON code
(SeongJae Park)
- "Docs/mm/damon: update intro, modules, maintainer profile, and misc"
performs maintenance work on the DAMON documentation (SeongJae Park)
- "mm: add and use vma_assert_stabilised() helper" refactors and cleans
up the core VMA code. The main aim here is to be able to use the mmap
write lock's lockdep state to perform various assertions regarding
the locking which the VMA code requires (Lorenzo Stoakes)
- "mm, swap: swap table phase II: unify swapin use" removes some old
swap code (swap cache bypassing and swap synchronization) which
wasn't working very well. Various other cleanups and simplifications
were made. The end result is a 20% speedup in one benchmark (Kairui
Song)
- "enable PT_RECLAIM on more 64-bit architectures" makes PT_RECLAIM
available on 64-bit alpha, loongarch, mips, parisc, and um. Various
cleanups were performed along the way (Qi Zheng)
* tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (325 commits)
mm/memory: handle non-split locks correctly in zap_empty_pte_table()
mm: move pte table reclaim code to memory.c
mm: make PT_RECLAIM depends on MMU_GATHER_RCU_TABLE_FREE
mm: convert __HAVE_ARCH_TLB_REMOVE_TABLE to CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config
um: mm: enable MMU_GATHER_RCU_TABLE_FREE
parisc: mm: enable MMU_GATHER_RCU_TABLE_FREE
mips: mm: enable MMU_GATHER_RCU_TABLE_FREE
LoongArch: mm: enable MMU_GATHER_RCU_TABLE_FREE
alpha: mm: enable MMU_GATHER_RCU_TABLE_FREE
mm: change mm/pt_reclaim.c to use asm/tlb.h instead of asm-generic/tlb.h
mm/damon/stat: remove __read_mostly from memory_idle_ms_percentiles
zsmalloc: make common caches global
mm: add SPDX id lines to some mm source files
mm/zswap: use %pe to print error pointers
mm/vmscan: use %pe to print error pointers
mm/readahead: fix typo in comment
mm: khugepaged: fix NR_FILE_PAGES and NR_SHMEM in collapse_file()
mm: refactor vma_map_pages to use vm_insert_pages
mm/damon: unify address range representation with damon_addr_range
mm/cma: replace snprintf with strscpy in cma_new_area
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota and isofs updates from Jan Kara:
- a fix for quotactl livelock during filesystem freezing
- a small improvement for isofs
- a documentation fix for ext2
* tag 'fs_for_v6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
isofs: support full length file names (255 instead of 253)
quota: fix livelock between quotactl and freeze_super
doc : fix a broken link in ext2.rst
|
|
Pull nfsd updates from Chuck Lever:
"Neil Brown and Jeff Layton contributed a dynamic thread pool sizing
mechanism for NFSD. The sunrpc layer now tracks minimum and maximum
thread counts per pool, and NFSD adjusts running thread counts based
on workload: idle threads exit after a timeout when the pool exceeds
its minimum, and new threads spawn automatically when all threads are
busy. Administrators control this behavior via the nfsdctl netlink
interface.
Rick Macklem, FreeBSD NFS maintainer, generously contributed server-
side support for the POSIX ACL extension to NFSv4, as specified in
draft-ietf-nfsv4-posix-acls. This extension allows NFSv4 clients to
get and set POSIX access and default ACLs using native NFSv4
operations, eliminating the need for sideband protocols. The feature
is gated by a Kconfig option since the IETF draft has not yet been
ratified.
Chuck Lever delivered numerous improvements to the xdrgen tool. Error
reporting now covers parsing, AST transformation, and invalid
declarations. Generated enum decoders validate incoming values against
valid enumerator lists. New features include pass-through line support
for embedding C directives in XDR specifications, 16-bit integer
types, and program number definitions. Several code generation issues
were also addressed.
When an administrator revokes NFSv4 state for a filesystem via the
unlock_fs interface, ongoing async COPY operations referencing that
filesystem are now cancelled, with CB_OFFLOAD callbacks notifying
affected clients.
The remaining patches in this pull request are clean-ups and minor
optimizations. Sincere thanks to all contributors, reviewers, testers,
and bug reporters who participated in the v7.0 NFSD development cycle"
* tag 'nfsd-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (45 commits)
NFSD: Add POSIX ACL file attributes to SUPPATTR bitmasks
NFSD: Add POSIX draft ACL support to the NFSv4 SETATTR operation
NFSD: Add support for POSIX draft ACLs for file creation
NFSD: Add support for XDR decoding POSIX draft ACLs
NFSD: Refactor nfsd_setattr()'s ACL error reporting
NFSD: Do not allow NFSv4 (N)VERIFY to check POSIX ACL attributes
NFSD: Add nfsd4_encode_fattr4_posix_access_acl
NFSD: Add nfsd4_encode_fattr4_posix_default_acl
NFSD: Add nfsd4_encode_fattr4_acl_trueform_scope
NFSD: Add nfsd4_encode_fattr4_acl_trueform
Add RPC language definition of NFSv4 POSIX ACL extension
NFSD: Add a Kconfig setting to enable support for NFSv4 POSIX ACLs
xdrgen: Implement pass-through lines in specifications
nfsd: cancel async COPY operations when admin revokes filesystem state
nfsd: add controls to set the minimum number of threads per pool
nfsd: adjust number of running nfsd threads based on activity
sunrpc: allow svc_recv() to return -ETIMEDOUT and -EBUSY
sunrpc: split new thread creation into a separate function
sunrpc: introduce the concept of a minimum number of threads per pool
sunrpc: track the max number of requested threads in a pool
...
|
|
Reference the dai-common.yaml schema to allow '#sound-dai-cells' and
"sound-name-prefix' to be used because asahi-kasei,ak5558 is codec DAI.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260211101009.2895296-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls
for small helper and stack canary overhead in the fast-path.
This generates better and faster code with very small or no text
size increases, as in many cases the call generated more code than
the actual inlined helper.
- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.
- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage
by up to ~30%.
- Do not add HBH header to Big TCP GSO packets. This simplifies the
RX path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without
the HBH hint.
- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified,
aligning IPv6 to IPv4 behavior.
- Multi-queue aware sch_cake. This makes it possible to scale the
rate shaper of sch_cake across multiple CPUs, while still enforcing
a single global rate on the interface.
- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations
that are safer in crash scenarios.
- Improve the TCP ipv6 output path to cache the flow information,
saving cpu cycles, reducing cache line misses and stack use.
- Improve netfilter packet tracker to resolve clashes for most
protocols, avoiding unneeded drops on rare occasions.
- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.
- Reduce tcp socket size by one cache line.
- Notify neighbour changes atomically, avoiding inconsistencies
between the notification sequence and the actual states sequence.
- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.
- Improve xsk generic performances with cache-alignment-oriented
optimizations.
- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes
back online.
Driver API:
- Support for switching the working mode (automatic vs manual) of a
DPLL device via netlink.
- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.
- Introduce "rx-polarity" and "tx-polarity" device tree properties,
to generalize polarity inversion requirements for differential
signaling.
- Add helper to create, prepare and enable managed clocks.
Device drivers:
- Add Huawei hinic3 PF etherner driver.
- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet
controller.
- Add ethernet driver for MaxLinear MxL862xx switches
- Remove parallel-port Ethernet driver.
- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().
- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.
- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram
and NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the
used H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO,
leading to 12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new
layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors
- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC
- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework
- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema
- CAN:
- move skb headroom content into skb extensions, making CAN
metadata access more robust
- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling
- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211
- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support multi-wiphy
devices and and pave the way for future device support in the
same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support
- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections
- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature"
* tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits)
bnge/bng_re: Add a new HSI
net: macb: Fix tx/rx malfunction after phy link down and up
af_unix: Fix memleak of newsk in unix_stream_connect().
net: ti: icssg-prueth: Add optional dependency on HSR
net: dsa: add basic initial driver for MxL862xx switches
net: mdio: add unlocked mdiodev C45 bus accessors
net: dsa: add tag format for MxL862xx switches
dt-bindings: net: dsa: add MaxLinear MxL862xx
selftests: drivers: net: hw: Modify toeplitz.c to poll for packets
octeontx2-pf: Unregister devlink on probe failure
net: renesas: rswitch: fix forwarding offload statemachine
ionic: Rate limit unknown xcvr type messages
tcp: inet6_csk_xmit() optimization
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock()
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect()
ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6
ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update()
ipv6: use np->final in inet6_sk_rebuild_header()
ipv6: add daddr/final storage in struct ipv6_pinfo
net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup()
...
|
