| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This documents 9Tripod X3568 v4 which is a SBC based on RK3568 SoC.
Link: http://www.9tripod.com/showpro.php?id=117
Link: https://appletsapi.52solution.com/media/X3568V4%E5%BC%80%E5%8F%91%E6%9D%BF%E7%A1%AC%E4%BB%B6%E6%89%8B%E5%86%8C.pdf
Signed-off-by: Coia Prant <coiaprant@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251103171702.1518730-3-coiaprant@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add 9Tripod to the vendor prefixes.
Signed-off-by: Coia Prant <coiaprant@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251103171702.1518730-2-coiaprant@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Extend the Lantiq GSWIP device tree binding to also cover MaxLinear
GSW1xx switches which are based on the same hardware IP but connected
via MDIO instead of being memory-mapped.
Add compatible strings for MaxLinear GSW120, GSW125, GSW140, GSW141,
and GSW145 switches and adjust the schema to handle the different
connection methods with conditional properties.
Add MaxLinear GSW125 example showing MDIO-connected configuration.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/fc96f1dedb2b418a63e69960356dde7f6eb86424.1762170107.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for standard tx-internal-delay-ps and rx-internal-delay-ps
properties on port nodes to allow fine-tuning of RGMII clock delays.
The GSWIP switch hardware supports delay values in 500 picosecond
increments from 0 to 3500 picoseconds, with a post-reset default of 2000
picoseconds for both TX and RX delays. The driver currently sets the
delay to 0 in case the PHY is setup to carry out the delay by the
corresponding interface modes ("rgmii-id", "rgmii-rxid", "rgmii-txid").
This corresponds to the driver changes that allow adjusting MII delays
using Device Tree properties instead of relying solely on the PHY
interface mode.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/9e007d4f85c2c6d69e0b91f3663d99e0f6fc8eac.1762170107.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for the maxlinear,rmii-refclk-out boolean property on port
nodes to configure the RMII reference clock to be an output rather than
an input.
This property is only applicable for ports in RMII mode and allows the
switch to provide the reference clock for RMII-connected PHYs instead
of requiring an external clock source.
This corresponds to the driver changes that read this Device Tree
property to configure the RMII clock direction.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/9813bb916ecce9bae366e6c50c081014fe5371ea.1762170107.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Document Device Tree bindings for the Andes ATCRTC100 Real-Time Clock.
Signed-off-by: CL Wang <cl634@andestech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250915031439.2680364-2-cl634@andestech.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Currently the i40e driver enforces its own internally calculated per-VF MAC
filter limit, derived from the number of allocated VFs and available
hardware resources. This limit is not configurable by the administrator,
which makes it difficult to control how many MAC addresses each VF may
use.
This patch adds support for the new generic devlink runtime parameter
"max_mac_per_vf" which provides administrators with a way to cap the
number of MAC addresses a VF can use:
- When the parameter is set to 0 (default), the driver continues to use
its internally calculated limit.
- When set to a non-zero value, the driver applies this value as a strict
cap for VFs, overriding the internal calculation.
Important notes:
- The configured value is a theoretical maximum. Hardware limits may
still prevent additional MAC addresses from being added, even if the
parameter allows it.
- Since MAC filters are a shared hardware resource across all VFs,
setting a high value may cause resource contention and starve other
VFs.
- This change gives administrators predictable and flexible control over
VF resource allocation, while still respecting hardware limitations.
- Previous discussion about this change:
https://lore.kernel.org/netdev/20250805134042.2604897-2-dhill@redhat.com
https://lore.kernel.org/netdev/20250823094952.182181-1-mheib@redhat.com
Signed-off-by: Mohammad Heib <mheib@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add a new device generic parameter to controls the maximum
number of MAC filters allowed per VF.
For example, to limit a VF to 3 MAC addresses:
$ devlink dev param set pci/0000:3b:00.0 name max_mac_per_vf \
value 3 \
cmode runtime
Signed-off-by: Mohammad Heib <mheib@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.18-rc5).
Conflicts:
drivers/net/wireless/ath/ath12k/mac.c
9222582ec524 ("Revert "wifi: ath12k: Fix missing station power save configuration"")
6917e268c433 ("wifi: ath12k: Defer vdev bring-up until CSA finalize to avoid stale beacon")
https://lore.kernel.org/11cece9f7e36c12efd732baa5718239b1bf8c950.camel@sipsolutions.net
Adjacent changes:
drivers/net/ethernet/intel/Kconfig
b1d16f7c0063 ("libie: depend on DEBUG_FS when building LIBIE_FWLOG")
93f53db9f9dc ("ice: switch to Page Pool")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is some overlap with the cs4271 driver.
|
|
Allow two resets to be defined to support the SpacemiT K1 SoC QSPI IP.
Move the allOf block down, below the required section.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20251027133008.360237-3-elder@riscstar.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the SpacemiT K1 SoC QSPI IP to the list of supported hardware. This
is the first non-Freescale device represented here. It has a nearly
identidal register set, and this binding correctly describes the hardware.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20251027133008.360237-2-elder@riscstar.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Mark 'interrupts', 'interrupt-controller', and 'interrupt-cells' as
optional in the binding schema.
The 'interrupts' property should not be required for the TPS65910 PMIC.
On the AM335x-ICEV2 SoC, there is no hardware connection from the PMIC_INT
pin to the SoC. Without the 'interrupts' property defined, the PMIC cannot
forward interrupts.
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251021182716.292652-1-s-ramamoorthy@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Allow wakeup-source property to below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-emcon-avari.dtb: pmic@58 (dlg,da9063): onkey: 'wakeup-source' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251014184114.2353199-1-Frank.Li@nxp.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
This PMIC is referenced in upstream DTs for the Renesas Lager and
Koelsch boards. Sadly, there is no documentation available. This minimal
binding description states the facts that we do know.
Fixes:
arch/arm/boot/dts/renesas/r8a7790-lager.dtb: /soc/spi@e6e10000/pmic@0: failed to match any schema with compatible: ['renesas,r2a11302ft']
arch/arm/boot/dts/renesas/r8a7791-koelsch.dtb: /soc/spi@e6e20000/pmic@0: failed to match any schema with compatible: ['renesas,r2a11302ft']
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251010094734.10487-2-wsa+renesas@sang-engineering.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The wl1273 FM radio is on Arnd's unused driver list:
https://lore.kernel.org/lkml/a15bb180-401d-49ad-a212-0c81d613fbc8@app.fastmail.com/
Other patches have removed the core, the ASoC code and the Radio code.
With all those in, remove the header.
Also, tidy the ref in the docs.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add interrupt-controller property, because max77705 has dedicated interrupt
source register to determine which sub device triggered an interrupt.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
To be able to fully describe how the SY7636A is connected to the system,
add properties for the EN and VCOM_EN pins. To squeeze out every bit
of unused current, in many devices it is possible to power off the
complete chip. Add an input regulator to allow that.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andreas Kemnade <akemnade@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Commit
199747106934 ("edac: add a new per-dimm API and make the old per-virtual-rank API obsolete")
introduced a new per-DIMM sysfs interface for EDAC making the old
per-virtual-rank sysfs interface obsolete.
Since this new sysfs interface was introduced more than a decade ago, remove
the obsolete legacy interface.
Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20251106015727.1987246-1-avadhut.naik@amd.com
|
|
Document the compatible string for the MusePi Pro [1]. It is a 1.8-inch
single board computer based on the SpacemiT K1/M1 RISC-V SoC [2].
Here's a refined list of its core features:
- SoC: SpacemiT M1/K1, 8-core 64-bit RISC-V.
- Memory: LPDDR4X @ 2400MT/s, available in 8GB & 16GB options.
- Storage: Onboard eMMC 5.1 (64GB/128GB options), M.2 M-Key for NVMe
SSD (2230 size), and a microSD slot (UHS-II) for expansion.
- Display: HDMI 1.4 (1080P@60Hz) and 2-lane MIPI DSI FPC (1080P@60Hz).
- Connectivity: Onboard Wi-Fi 6 & Bluetooth 5.2, single Gigabit Ethernet
port (RJ45).
- USB: 4x USB 3.0 Type-A (host) and 1x USB 2.0 Type-C (device/OTG).
- Expansion: Full-size miniPCIe slot and a second M.2 M-Key (2230).
- GPIO: Standard 40-pin GPIO interface.
- MIPI: 1x 4-lane MIPI CSI FPC and 2x MIPI DSI FPC interfaces.
- Clock: Onboard RTC with battery support.
Link: https://developer.spacemit.com/documentation?token=YJtdwnvvViPVcmkoPDpcvwfVnrh&type=pdf [1]
Link: https://www.spacemit.com/en/key-stone-k1 [2]
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Link: https://lore.kernel.org/r/20251023-k1-musepi-pro-dts-v4-1-01836303e10f@linux.spacemit.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Add bindings for qcom,msm8939-camss in order to support the camera
subsystem for MSM8939.
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
[André: Make order of items the same as in 8916]
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add device tree bindings for Qualcomm SM8650 camera subsystem.
Qualcomm SM8650 CAMSS IP contains the next subdevices:
* 6 x CSIPHY,
* 3 x CSID, 2 x CSID Lite,
* 3 x IFE, 2 x IFE Lite.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Correct description of the CSIPHY 1.2 V supply
("vdd-csiphy-1p2-supply"), because it supplies 1.2 V, confirmed with DTS
on the mailing lists.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The static TPDM device is intended for sources that do not require MMIO
mapping. Its compatible string should be documented clearly, along with
an example illustrating how to define a static TPDM node in the DT.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251028-add_static_tpdm_support-v4-1-84e21b98e727@oss.qualcomm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
Merge series from AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>:
This series adds support for three new MediaTek PMICs: MT6316, MT6363
and MT6373 and their variants - used in board designs featuring the
MediaTek MT8196 Chromebook SoC, or the MT6991 Dimensity 9400 Smartphone
SoC.
In particular, MT6316 is a regulator, but the MT6363 and MT6373 PMICs
are multi-function devices, as they have and expose multiple sub-devices;
moreover, some of those also contain an interrupt controller, managing
internal IPs interrupts: for those, a chained interrupt handler is
registered, which parent is the SPMI controller itself.
This series adds support for all of the MT6316 regulator variants and
for MT6363, MT6373 SPMI PMICs and their interrupt controller.
|
|
Merge series from Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>:
This patchset has 4 fixes and some enhancements to the Elite DSP driver
support.
Fixes includes
- setting correct flags for expected behaviour of appl_ptr
- fix closing of copp instances
- fix buffer alignment.
- fix state checks before closing asm stream
Enhancements include:
- adding q6asm_get_hw_pointer and ack callback support
- simplify code via __free(kfree) mechanism.
- use spinlock guards
- few cleanups discovered during doing above 2.
There is another set of updates comming soon, which will add support
for early memory mapping and few more modules support in audioreach.
|
|
Document the crypto engine on the kaanapali platform.
Signed-off-by: Gaurav Kashyap <gaurav.kashyap@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Document kaanapali compatible for the True Random Number Generator.
Signed-off-by: Gaurav Kashyap <gaurav.kashyap@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add SHA-3 support to lib/crypto/. All six algorithms in the SHA-3
family are supported: four digests (SHA3-224, SHA3-256, SHA3-384, and
SHA3-512) and two extendable-output functions (SHAKE128 and SHAKE256).
The SHAKE algorithms will be required for ML-DSA.
[EB: simplified the API to use fewer types and functions, fixed bug that
sometimes caused incorrect SHAKE output, cleaned up the
documentation, dropped an ad-hoc test that was inconsistent with
the rest of lib/crypto/, and many other cleanups]
Signed-off-by: David Howells <dhowells@redhat.com>
Co-developed-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251026055032.1413733-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
eswin,hsp-sp-csr attribute is one phandle with multiple arguments,
so the syntax should be in the form of:
items:
- items:
- description: ...
- description: ...
- description: ...
- description: ...
To align with the description of the 'eswin-sp-csr'
attribute in the mmc,usb modules, the description
of the 'eswin,hsp-sp-csr' attribute has been modified.
Fixes: 888bd0eca93c ("dt-bindings: ethernet: eswin: Document for EIC7700 SoC")
Reported-by: Rob Herring (Arm) <robh@kernel.org>
Closes: https://lore.kernel.org/all/176096011380.22917.1988679321096076522.robh@kernel.org/
Signed-off-by: Shangjuan Wei <weishangjuan@eswincomputing.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251104073305.299-1-weishangjuan@eswincomputing.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This commit documents the DEFINE_SRCU_FAST(), DEFINE_STATIC_SRCU_FAST(),
and init_srcu_struct_fast() API members.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: <bpf@vger.kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
Add missing taint flags for loadable modules, as pointed out by
Petr Pavlu [1].
[1] https://lore.kernel.org/all/c58152f1-0fbe-4f50-bb61-e2f4c0584025@suse.com/
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251102060458.517911-1-rdunlap@infradead.org>
|
|
Uacce docs' sections are listed in misc-devices toctree instead due to
lack of explicit docs title. Add it to clean up the toctree.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251103093817.52764-2-bagasdotme@gmail.com>
|
|
pldmfw library overview section is formatted as title heading (the
second title of index.rst), making it listed in driver-api toctree.
Demote the section.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251103030228.23851-1-bagasdotme@gmail.com>
|
|
Add examples of using '%' for formatting constant values to
facilitate more usage of "%CONST" in kernel-doc.
Suggested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251104050930.720711-1-rdunlap@infradead.org>
|
|
Avoid case-sensitive sorting when listing Documentation targets in make help.
Previously, targets like PCI and RCU appeared ahead of others due to uppercase
names.
Normalize casing during _SPHINXDIRS generation to ensure consistent and
intuitive ordering.
Fixes: 965fc39f7393 ("Documentation: sort _SPHINXDIRS for 'make help'")
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bhanu Seshu Kumar Valluri <bhanuseshukumar@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251104061723.16629-1-bhanuseshukumar@gmail.com>
|
|
The URL in w1-netlink.rst for an example userspace application
has changed. The former URL is no longer valid. Update it to the
github URL.
Fixes: e4e056aa3518 ("w1: documentation update")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251104194403.945611-1-rdunlap@infradead.org>
|
|
Commit 0122938a7ab4 ("rtla: Always set all tracer options") changed the
behavior of RTLA to always set all osnoise and timerlat tracer options
to default values taken from the tracers whenever an RTLA measurement
is started. The change was done to make RTLA results consistent on
subsequent runs of the same command.
Include the default values for tracer options also in documentation
where appropriate.
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251010083338.478961-10-tglozar@redhat.com>
|
|
The timerlat tracer documentation mentions that threads are created with
real-time priority, but does not mention which priority and scheduling
class is used.
Add the information so that users do not have to look it up in
trace_osnoise.c.
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251010083338.478961-9-tglozar@redhat.com>
|
|
The RTLA option -C/--cgroup is used to set a cgroup for workload
threads. This is either a specific cgroup, if passed an argument, or
rtla's cgroup, if no argument is given.
Expand the documentation of the -C option to also include the
information about the cgroup settings when the option is not specified.
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251010083338.478961-8-tglozar@redhat.com>
|
|
RTLA allows the priority of workload threads to be set using the -P
option. This is covered in docs, but the default state for RTLA's own
user workload (implemented in timerlat_u.c) is not mentioned.
Add mention of the default user workload priority as well as a reference
to osnoise and timerlat tracers for kernel workload priority.
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251010083338.478961-7-tglozar@redhat.com>
|
|
Several options in common_options.rst say "osnoise tracer" for both
osnoise and timerlat.
Use |tool| variable so that the correct tool name is used.
Fixes: b1be48307de4 ("rtla: Add rtla osnoise top documentation")
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251010083338.478961-6-tglozar@redhat.com>
|
|
Fix spelling error "equilavent" in place of "equivalent".
Fixes: 173a3b014827 ("rtla/timerlat: Add the automatic trace option")
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251010083338.478961-5-tglozar@redhat.com>
|
|
Fix "seem" in place of intended "seen" in rtla-timerlat-top
documentation.
Fixes: df337d014b57 ("rtla: Add rtla timerlat top documentation")
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251010083338.478961-4-tglozar@redhat.com>
|
|
Fix "awakes" being used in place of "awakened" in --users-threads option
documentation.
Fixes: 612738321774 ("Documentation: Add tools/rtla timerlat -u option documentation")
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251010083338.478961-3-tglozar@redhat.com>
|
|
Fix "unlike" being spelled "nlike" in --on-threshold documentation.
Fixes: 70165c78e31d ("Documentation/rtla: Add actions feature")
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251010083338.478961-2-tglozar@redhat.com>
|
|
Add bindings for the regulators found in the MediaTek MT6363 PMIC,
usually found in board designs using the MT6991 Dimensity 9400 and
on MT8196 Kompanio SoC for Chromebooks, along with the MT6316 and
MT6373 PMICs.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251027110527.21002-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add bindings for the regulators found in the MediaTek MT6316 PMIC,
usually found in board designs using the MT6991 Dimensity 9400 and
on MT8196 Kompanio SoC for Chromebooks.
This chip is fully controlled by SPMI and has multiple variants
providing different phase configurations.
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251027110527.21002-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add compatibles for Bananapi R4 Pro boards.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add bcm2712-pm compatible and update the bindings to satisfy it's
requirements. The PM hardware block inside bcm2712 lacks the "asb"
and "rpivid_asb" register ranges and also does not have clocks, update
the bindings accordingly.
Signed-off-by: Stanimir Varbanov <svarbanov@suse.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
