| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
The mcp251xfd has two pins that can be used as gpio. Add gpio-controller
property to binding description.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251001091006.4003841-7-viken.dadhaniya@oss.qualcomm.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
In practical problem diagnosis, especially during the boot phase, it is
often desirable to know the call sequence. However, currently, apart from
adding print statements and recompiling the kernel, there seems to be no
good alternative. If dynamic_debug supported printing the call stack, it
would be very helpful for diagnosing issues. This patch add support '+d'
for dump stack.
Link: https://lkml.kernel.org/r/20251025080003.312536-1-yebin@huaweicloud.com
Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The hung_task_panic sysctl is currently a blunt instrument: it's all or
nothing.
Panicking on a single hung task can be an overreaction to a transient
glitch. A more reliable indicator of a systemic problem is when
multiple tasks hang simultaneously.
Extend hung_task_panic to accept an integer threshold, allowing the
kernel to panic only when N hung tasks are detected in a single scan.
This provides finer control to distinguish between isolated incidents
and system-wide failures.
The accepted values are:
- 0: Don't panic (unchanged)
- 1: Panic on the first hung task (unchanged)
- N > 1: Panic after N hung tasks are detected in a single scan
The original behavior is preserved for values 0 and 1, maintaining full
backward compatibility.
[lance.yang@linux.dev: new changelog]
Link: https://lkml.kernel.org/r/20251015063615.2632-1-lirongqing@baidu.com
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Tested-by: Lance Yang <lance.yang@linux.dev>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au> [aspeed_g5_defconfig]
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Florian Wesphal <fw@strlen.de>
Cc: Jakub Kacinski <kuba@kernel.org>
Cc: Jason A. Donenfeld <jason@zx2c4.com>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Simon Horman <horms@kernel.org>
Cc: Stanislav Fomichev <sdf@fomichev.me>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The Anlogic DR1V90 SoC integrates a UART controller compatible with
snps,dw-apb-uart, operating at a 50 MHz clock.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Add MTIMER support for Anlogic DR1V90 SoC, which uses Nuclei UX900 with
a TIMER unit compliant with the ACLINT specification.
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Add Anlogic DR1V90 FPSoC, featuring a UX900 RISC-V core as the
processing system (PS) and 94,464 LUTs programmable logic (PL). It is
used by the Milianke MLKPAI-FS01 board, a SBC equipped with 512MB DDR3
memory, USB-C UART, 1GbE RJ45 Ethernet, USB-A 2.0 port, TF card slot,
and 256Mbit Quad-SPI flash.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
The UX900 is a RISC-V core from Nuclei, used in the Anlogic DR1V90 SoC.
It features a 64-bit architecture and dual-issue, 9-stage pipeline, with
lots of optional extensions including V, K, Zc, and more.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Add vendor prefixes for "anlogic", "milianke" and "nuclei". These are
required for describing the Milianke MLKPAI-FS01 board with DR1V90 SoC
from Anlogic, which uses a processor core designed by Nuclei.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Convert the Nuvoton NPCM PSPI binding to DT schema format.
Also update the binding to fix shortcoming:
* Drop clock-frequency property: it is never read in the NPCM PSPI
driver and has no effect.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251112150950.1680154-1-tmaimon77@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Peng Fan <peng.fan@nxp.com> says:
TJA1048 is a Dual channel can transceiver with Sleep mode supported.
TJA105{1,7} is a Single Channel can transceiver with Sleep mode supported.
Link: https://patch.msgid.link/20251001-can-v7-0-fad29efc3884@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The TJA1048 is a dual high-speed CAN transceiver with sleep mode supported
and no EN pin.
The TJA1051 is a high-speed CAN transceiver with slient mode supported,
but only TJA1051T/E has EN pin. To make it simple, make enable-gpios as
optional for TJA1051.
The TJA1057 is a high-speed CAN transceiver with slient mode supported
and no EN pin.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20251001-can-v7-1-fad29efc3884@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Document the compatible string for the OrangePi R2S board [1], which
is marketed as using the Ky X1 SoC but is in fact identical in die
and package to the SpacemiT K1 SoC [2].
Link: http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-R2S.html [1]
Link: https://www.spacemit.com/en/key-stone-k1 [2]
Signed-off-by: Michael Opdenacker <michael.opdenacker@rootcommit.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20251112044426.2351999-2-michael.opdenacker@rootcommit.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Document the new userspace-visible features and APIs for handling
synchronous external abort (SEA)
- KVM_CAP_ARM_SEA_TO_USER: How userspace enables the new feature.
- KVM_EXIT_ARM_SEA: exit userspace gets when it needs to handle SEA
and what userspace gets while taking the SEA.
Signed-off-by: Jiaqi Yan <jiaqiyan@google.com>
Link: https://msgid.link/20251013185903.1372553-4-jiaqiyan@google.com
[ oliver: make documentation concise, remove implementation detail ]
Signed-off-by: Oliver Upton <oupton@kernel.org>
|
|
Instead of requiring that the caller calls iomap_finish_folio_read()
even if the ->read_folio_range() callback returns an error, account for
this internally in iomap instead, which makes the interface simpler and
makes it match writeback's ->read_folio_range() error handling
expectations.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://patch.msgid.link/20251111193658.3495942-6-joannelkoong@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Document that iomap_finish_folio_write() must be called after writeback
on the range completes.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://patch.msgid.link/20251111193658.3495942-4-joannelkoong@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
XFRM docs are currently reside in Documentation/networking directory,
yet these are distinctive as a group of their own. Move them into xfrm
subdirectory.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Number the fifth section ("Exception to threshold settings") to be
consistent with the rest of sections.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The sole section heading ("/proc/sys/net/core/xfrm_* Variables") has
trailing colon. Trim it.
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The first section "Message Structure" has excess underline, while the
second and third one ("TLVS reflect the different parameters" and
"Default configurations for the parameters") have trailing colon. Trim
them.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
List texts are currently aligned at the start of column, rather than
after the list marker. Reindent them.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Sublists of hardware offload type lists are rendered in combined
paragraph due to lack of separator from their parent list. Add it.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Format xfrm offloading steps as numbered list.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
iproute2 snippets (ip x) are shown in long-running definition lists
instead. Format them as literal code blocks that do the semantic job
better.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Adds documentation for the new check PLACEHOLDER_USE in checkpatch.
Link: https://lkml.kernel.org/r/20250917173725.22547-3-work@onurozkan.dev
Signed-off-by: Onur Özkan <work@onurozkan.dev>
Acked-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
and interrupts count
Update the AST2700 interrupt controller binding to match the actual
hardware and the irq-aspeed-intc driver behavior.
- Interrupts:
First-level INTC banks request multiple interrupt lines to the root
GIC, with a maximum of 10 per bank. Second-level INTC banks request
only one interrupt line to their parent INTC-IC. Therefore, set the
interrupts property to allow a minimum of 1 and a maximum of 10
entries.
- #interrupt-cells:
Set '#interrupt-cells' to <1> since the aspeed intc driver does not
support specifying a trigger type; only the interrupt index is used.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251030060155.2342604-2-ryan_chen@aspeedtech.com
|
|
Add SSWI support for Anlogic DR1V90 SoC, which uses Nuclei UX900 with a
TIMER unit compliant with the ACLINT specification.
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251021-dr1v90-basic-dt-v3-6-5478db4f664a@pigmoral.tech
|
|
Add MSWI support for Anlogic DR1V90 SoC, which uses Nuclei UX900 with a
TIMER unit compliant with the ACLINT specification.
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251021-dr1v90-basic-dt-v3-5-5478db4f664a@pigmoral.tech
|
|
Add PLIC support for Anlogic DR1V90.
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251021-dr1v90-basic-dt-v3-4-5478db4f664a@pigmoral.tech
|
|
Add a SHA3 kunit test suite, providing the following:
(*) A simple test of each of SHA3-224, SHA3-256, SHA3-384, SHA3-512,
SHAKE128 and SHAKE256.
(*) NIST 0- and 1600-bit test vectors for SHAKE128 and SHAKE256.
(*) Output tiling (multiple squeezing) tests for SHAKE256.
(*) Standard hash template test for SHA3-256. To make this possible,
gen-hash-testvecs.py is modified to support sha3-256.
(*) Standard benchmark test for SHA3-256.
[EB: dropped some unnecessary changes to gen-hash-testvecs.py, moved
addition of Testing section in doc file into this commit, and
other small cleanups]
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Harald Freudenberger <freude@linux.ibm.com>
Link: https://lore.kernel.org/r/20251026055032.1413733-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
CONFIG_CRYPTO_POLYVAL_ARM64_CE and CONFIG_CRYPTO_POLYVAL_CLMUL_NI no
longer exist. The architecture-optimized POLYVAL code is now just
enabled automatically when HCTR2 support is enabled. Update the fscrypt
documentation accordingly.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251109234726.638437-10-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Convert SOCIONEXT Milbeaut SDHCI controller binding to YAML format.
Add a new property "voltage-ranges" to resolve dt_check errors.
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Convert TI Highspeed MMC host controller binding to YAML format. Define
'clocks' and 'interrupts' properties to resolve errors identified by
'dt_check' and 'dtb_check'.
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
EIC7700 use Synopsys dwcmshc IP for SD/eMMC controllers.
Add Eswin EIC7700 support in sdhci-of-dwcmshc.yaml.
Signed-off-by: Huan He <hehuan1@eswincomputing.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add documentation for i.MX8ULP's SIM LPAV module.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Link: https://lore.kernel.org/r/20251104120301.913-3-laurentiumihalcea111@gmail.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
Adds DEVLINK_ESWITCH_MODE_SWITCHDEV_INACTIVE attribute to UAPI and
documentation.
Before having traffic flow through an eswitch, a user may want to have the
ability to block traffic towards the FDB until FDB is fully programmed and
the user is ready to send traffic to it. For example: when two eswitches
are present for vports in a multi-PF setup, one eswitch may take over the
traffic from the other when the user chooses.
Before this take over, a user may want to first program the inactive
eswitch and then once ready redirect traffic to this new eswitch.
switchdev modes transition semantics:
legacy->switchdev_inactive: Create switchdev mode normally, traffic not
allowed to flow yet.
switchdev_inactive->switchdev: Enable traffic to flow.
switchdev->switchdev_inactive: Block traffic on the FDB, FDB and
representros state and content is preserved.
When eswitch is configured to this mode, traffic is ignored/dropped on
this eswitch FDB, while current configuration is kept, e.g FDB rules and
netdev representros are kept available, FDB programming is allowed.
Example:
# start inactive switchdev
devlink dev eswitch set pci/0000:08:00.1 mode switchdev_inactive
# setup TC rules, representors etc ..
# activate
devlink dev eswitch set pci/0000:08:00.1 mode switchdev
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20251108070404.1551708-2-saeed@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Linux 6.18-rc5
* tag 'v6.18-rc5': (1016 commits)
Linux 6.18-rc5
kbuild: Let kernel-doc.py use PYTHON3 override
rtc: rx8025: fix incorrect register reference
Revert "drm/nouveau: set DMA mask before creating the flush page"
io_uring: fix regbuf vector size truncation
compiler_types: Move unused static inline functions warning to W=2
smb: client: validate change notify buffer before copy
tracing/tools: Fix incorrcet short option in usage text for --threads
drm/xe: Enforce correct user fence signaling order using
x86/microcode/AMD: Add more known models to entry sign checking
drm/xe: Do clean shutdown also when using flr
drm/xe: Move declarations under conditional branch
drm/xe/guc: Synchronize Dead CT worker with unbind
tracing: Fix memory leaks in create_field_var()
ring-buffer: Do not warn in ring_buffer_map_get_reader() when reader catches up
tracing: tprobe-events: Fix to put tracepoint_user when disable the tprobe
tracing: tprobe-events: Fix to register tracepoint correctly
gpio: tb10x: Drop unused tb10x_set_bits() function
drm/amd/display: Enable mst when it's detected but yet to be initialized
drm/amdgpu: Fix wait after reset sequence in S3
...
|
|
Commit 35c18f2933c5 ("Add a new optional ",cma" suffix to the
crashkernel= command line option") and commit ab475510e042 ("kdump:
implement reserve_crashkernel_cma") added CMA support for kdump
crashkernel reservation.
Extend crashkernel CMA reservation support to powerpc.
The following changes are made to enable CMA reservation on powerpc:
- Parse and obtain the CMA reservation size along with other crashkernel
parameters
- Call reserve_crashkernel_cma() to allocate the CMA region for kdump
- Include the CMA-reserved ranges in the usable memory ranges for the
kdump kernel to use.
- Exclude the CMA-reserved ranges from the crash kernel memory to
prevent them from being exported through /proc/vmcore.
With the introduction of the CMA crashkernel regions,
crash_exclude_mem_range() needs to be called multiple times to exclude
both crashk_res and crashk_cma_ranges from the crash memory ranges. To
avoid repetitive logic for validating mem_ranges size and handling
reallocation when required, this functionality is moved to a new wrapper
function crash_exclude_mem_range_guarded().
To ensure proper CMA reservation, reserve_crashkernel_cma() is called
after pageblock_order is initialized.
Update kernel-parameters.txt to document CMA support for crashkernel on
powerpc architecture.
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20251107080334.708028-1-sourabhjain@linux.ibm.com
|
|
Previously, raid array used the maximum logical block size (LBS)
of all member disks. Adding a larger LBS disk at runtime could
unexpectedly increase RAID's LBS, risking corruption of existing
partitions. This can be reproduced by:
```
# LBS of sd[de] is 512 bytes, sdf is 4096 bytes.
mdadm -CRq /dev/md0 -l1 -n3 /dev/sd[de] missing --assume-clean
# LBS is 512
cat /sys/block/md0/queue/logical_block_size
# create partition md0p1
parted -s /dev/md0 mklabel gpt mkpart primary 1MiB 100%
lsblk | grep md0p1
# LBS becomes 4096 after adding sdf
mdadm --add -q /dev/md0 /dev/sdf
cat /sys/block/md0/queue/logical_block_size
# partition lost
partprobe /dev/md0
lsblk | grep md0p1
```
Simply restricting larger-LBS disks is inflexible. In some scenarios,
only disks with 512 bytes LBS are available currently, but later, disks
with 4KB LBS may be added to the array.
Making LBS configurable is the best way to solve this scenario.
After this patch, the raid will:
- store LBS in disk metadata
- add a read-write sysfs 'mdX/logical_block_size'
Future mdadm should support setting LBS via metadata field during RAID
creation and the new sysfs. Though the kernel allows runtime LBS changes,
users should avoid modifying it after creating partitions or filesystems
to prevent compatibility issues.
Only 1.x metadata supports configurable LBS. 0.90 metadata inits all
fields to default values at auto-detect. Supporting 0.90 would require
more extensive changes and no such use case has been observed.
Note that many RAID paths rely on PAGE_SIZE alignment, including for
metadata I/O. A larger LBS than PAGE_SIZE will result in metadata
read/write failures. So this config should be prevented.
Link: https://lore.kernel.org/linux-raid/20251103125757.1405796-6-linan666@huaweicloud.com
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
|
|
Document Airoha AN7583 Pin Controller based on Airoha EN7581 with some
minor difference on some function group (PCM and LED gpio).
To not bloat the EN7581 schema with massive if condition, use a
dedicated YAML schema for Airoha AN7583.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Allow gpio-hogs in pinctrl node for switching pcie on Bananapi R4 Pro.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogiocchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add the compatible string for the rk3506 SoC.
Signed-off-by: Ye Zhang <ye.zhang@rock-chips.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Stephen Rothwell reports htmldocs warnings when merging drm-misc tree:
Documentation/ABI/stable/sysfs-driver-qaic:1: ERROR: Unexpected indentation. [docutils]
Documentation/ABI/stable/sysfs-driver-qaic:1: WARNING: Block quote ends without a blank line; unexpected unindent. [docutils]
Documentation/ABI/stable/sysfs-driver-qaic:1: WARNING: Definition list ends without a blank line; unexpected unindent. [docutils]
These are caused by DMA Bridge channel (DBC) states list in sysfs ABI
docs. Format it as a table to fix them.
Fixes: f286066ed9df38 ("accel/qaic: Add DMA Bridge Channel(DBC) sysfs and uevents")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20251110135038.29e96051@canb.auug.org.au/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251110035952.25778-4-bagasdotme@gmail.com
|
|
Stephen Rothwell reports htmldocs warnings when merging drm-misc tree:
Documentation/accel/qaic/aic100.rst:502: ERROR: Unexpected indentation. [docutils]
Documentation/accel/qaic/aic100.rst:504: WARNING: Block quote ends without a blank line; unexpected unindent. [docutils]
Fix these by separating DBC_STATE_* definition list from preceding
paragraph.
Fixes: 9675093acea04c ("accel/qaic: Implement basic SSR handling")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20251110132401.200d88bd@canb.auug.org.au/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251110035952.25778-3-bagasdotme@gmail.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel
Samsung pinctrl drivers changes for v6.19
Add pin controller support for Samsung Exynos8890 and Axis ARTPEC-9
SoCs. The latter is a newer design of Artpec SoCs made/designed by
Samsung, thus it shares most of the core blocks with Samsung Exynos,
including the pinctrl.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
C macro references are erroneously written using :c:macro:: (note the
double colon). This causes the references to be outputted as combination
of verbatim roles and italicized names instead.
Correct the syntax.
Fixes: dce548889650c1 ("Documentation: Add TI TPS6594 PFSM")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251104041812.31402-4-bagasdotme@gmail.com>
|
|
C macro references are erroneously written using :c:macro:: (note the
double colon). This causes the references to be outputted as combination
of verbatim roles and italicized names instead.
Correct the syntax.
Fixes: 5f67eef6dff394 ("misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251104041812.31402-3-bagasdotme@gmail.com>
|
|
Device file listing (ls output) is shown as long-running paragraph
instead. Wrap it in literal code block.
Fixes: 4d95514d14e874 ("misc: amd-sbi: Add document for AMD SB IOCTL description")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251104041812.31402-2-bagasdotme@gmail.com>
|
|
Payload kinds list text is indented at the first text column, rather
than aligned to the list number. As an effect, the third item becomes
sublist of second item's third sublist item (TASKTYPE_TYPE_STATS).
Reindent the list text.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251104130751.22755-1-bagasdotme@gmail.com>
|
|
Online fsck may take longer than offline fsck...
Signed-off-by: Gou Hao <gouhao@uniontech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251105013506.358-1-gouhao@uniontech.com>
|
