| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git
Extensible parameters support for the rkisp1 driver.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Document V4L2_PIX_FMT_MT2110T and V4L2_PIX_FMT_MT2110R. These two
formats are nearly identical, reusing MM21 format and expending it
by inserting chunk of 16 bytes of lower 2 bit pixel data after each
chunk of 64 bytes higher 8 bit of data.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
This diagram details the partitioning done in each tiles.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
This is a 15 bits per pixel (or packed 10 bit format), so move it
into the relevant section.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The diagram have been pushed back at the end of a list of unrelated
pixels formats. Move it back next its related pixel format.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The rkisp1 driver stores ISP configuration parameters in the fixed
rkisp1_params_cfg structure. As the members of the structure are part of
the userspace API, the structure layout is immutable and cannot be
extended further. Introducing new parameters or modifying the existing
ones would change the buffer layout and cause breakages in existing
applications.
The allow for future extensions to the ISP parameters, introduce a new
extensible parameters format, with a new format 4CC. Document usage of
the new format in the rkisp1 admin guide.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Commit d7894721f73b ("media: docs: Fix newline typo") aimed to fix the
newline typos in capture.c, but some of the typos were not fixed. Fix
the remaining newline typos.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The documentation of the Memory Consistency Flags was part of the struct
v4l2_buffer documentation, but that struct doesn't use those flags. Instead
it is used by VIDIOC_CREATE_BUFS and VIDIOC_REQBUFS. Move the documentation
from buffer.rst to vidioc-reqbufs.rst which is where it belongs.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The documentation for V4L2_BUF_CAP_SUPPORTS_MAX_NUM_BUFFERS and
V4L2_BUF_CAP_SUPPORTS_REMOVE_BUFS was missing. Add this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
|
|
Fix incorrect formatting.
Signed-off-by: Fritz Koenig <frkoenig@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: added missing commit message]
|
|
"Blanking" should be spelled as such, not "balanking". Fix it.
Reported-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
If this flag is set, then the reply is expected to consist of
the CEC_MSG_VENDOR_COMMAND_WITH_ID opcode followed by the Vendor ID (as
used in bytes 1-4 of the message), followed by the struct cec_msg reply
field.
Note that this assumes that the byte after the Vendor ID is a
vendor-specific opcode.
This flag makes it easier to wait for replies to vendor commands,
using the same CEC framework support for waiting for regular replies.
Support for this flag is indicated by setting the new
CEC_CAP_REPLY_VENDOR_ID capability.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The original patch added two columns in the flat-table of Luma-Only
Image Formats, without updating hints to latex: above it. This results
in wrong column count in the output of Sphinx's latex builder.
Fix it.
Reported-by: Akira Yokosawa <akiyks@gmail.com>
Closes: https://lore.kernel.org/linux-media/bdbc27ba-5098-49fb-aabf-753c81361cc7@gmail.com/
Fixes: adb1d4655e53 ("media: v4l: Add V4L2-PIX-FMT-Y14P format")
Cc: stable@vger.kernel.org # for v6.10
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@yoseli.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
It looks like this was supposed to be documented when VSOCK was
added[1], but it got lost in later submissions.
Link: https://lore.kernel.org/20130109000024.3719.71468.stgit@promb-2n-dhcp175.eng.vmware.com/#Z31Documentation:ioctl:ioctl-number.txt [1]
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240725171120.12226-2-hi@alyssa.is
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"This simplifies code and improves documentation"
* tag 'landlock-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Various documentation improvements
landlock: Clarify documentation for struct landlock_ruleset_attr
landlock: Use bit-fields for storing handled layer access masks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc and other driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.11-rc1. Nothing major in here, just loads of new drivers and
updates. Included in here are:
- IIO api updates and new drivers added
- wait_interruptable_timeout() api cleanups for some drivers
- MODULE_DESCRIPTION() additions for loads of drivers
- parport out-of-bounds fix
- interconnect driver updates and additions
- mhi driver updates and additions
- w1 driver fixes
- binder speedups and fixes
- eeprom driver updates
- coresight driver updates
- counter driver update
- new misc driver additions
- other minor api updates
All of these, EXCEPT for the final Kconfig build fix for 32bit
systems, have been in linux-next for a while with no reported issues.
The Kconfig fixup went in 29 hours ago, so might have missed the
latest linux-next, but was acked by everyone involved"
* tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits)
misc: Kconfig: exclude mrvl-cn10k-dpi compilation for 32-bit systems
misc: delete Makefile.rej
binder: fix hang of unregistered readers
misc: Kconfig: add a new dependency for MARVELL_CN10K_DPI
virtio: add missing MODULE_DESCRIPTION() macro
agp: uninorth: add missing MODULE_DESCRIPTION() macro
spmi: add missing MODULE_DESCRIPTION() macros
dev/parport: fix the array out-of-bounds risk
samples: configfs: add missing MODULE_DESCRIPTION() macro
misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver
misc: keba: Fix missing AUXILIARY_BUS dependency
slimbus: Fix struct and documentation alignment in stream.c
MAINTAINERS: CC dri-devel list on Qualcomm FastRPC patches
misc: fastrpc: use coherent pool for untranslated Compute Banks
misc: fastrpc: support complete DMA pool access to the DSP
misc: fastrpc: add missing MODULE_DESCRIPTION() macro
misc: fastrpc: Add missing dev_err newlines
misc: fastrpc: Use memdup_user()
nvmem: core: Implement force_ro sysfs attribute
nvmem: Use sysfs_emit() for type attribute
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Will Deacon:
"Core:
- Support for the "ats-supported" device-tree property
- Removal of the 'ops' field from 'struct iommu_fwspec'
- Introduction of iommu_paging_domain_alloc() and partial conversion
of existing users
- Introduce 'struct iommu_attach_handle' and provide corresponding
IOMMU interfaces which will be used by the IOMMUFD subsystem
- Remove stale documentation
- Add missing MODULE_DESCRIPTION() macro
- Misc cleanups
Allwinner Sun50i:
- Ensure bypass mode is disabled on H616 SoCs
- Ensure page-tables are allocated below 4GiB for the 32-bit
page-table walker
- Add new device-tree compatible strings
AMD Vi:
- Use try_cmpxchg64() instead of cmpxchg64() when updating pte
Arm SMMUv2:
- Print much more useful information on context faults
- Fix Qualcomm TBU probing when CONFIG_ARM_SMMU_QCOM_DEBUG=n
- Add new Qualcomm device-tree bindings
Arm SMMUv3:
- Support for hardware update of access/dirty bits and reporting via
IOMMUFD
- More driver rework from Jason, this time updating the PASID/SVA
support to prepare for full IOMMUFD support
- Add missing MODULE_DESCRIPTION() macro
- Minor fixes and cleanups
NVIDIA Tegra:
- Fix for benign fwspec initialisation issue exposed by rework on the
core branch
Intel VT-d:
- Use try_cmpxchg64() instead of cmpxchg64() when updating pte
- Use READ_ONCE() to read volatile descriptor status
- Remove support for handling Execute-Requested requests
- Avoid calling iommu_domain_alloc()
- Minor fixes and refactoring
Qualcomm MSM:
- Updates to the device-tree bindings"
* tag 'iommu-updates-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (72 commits)
iommu/tegra-smmu: Pass correct fwnode to iommu_fwspec_init()
iommu/vt-d: Fix identity map bounds in si_domain_init()
iommu: Move IOMMU_DIRTY_NO_CLEAR define
dt-bindings: iommu: Convert msm,iommu-v0 to yaml
iommu/vt-d: Fix aligned pages in calculate_psi_aligned_address()
iommu/vt-d: Limit max address mask to MAX_AGAW_PFN_WIDTH
docs: iommu: Remove outdated Documentation/userspace-api/iommu.rst
arm64: dts: fvp: Enable PCIe ATS for Base RevC FVP
iommu/of: Support ats-supported device-tree property
dt-bindings: PCI: generic: Add ats-supported property
iommu: Remove iommu_fwspec ops
OF: Simplify of_iommu_configure()
ACPI: Retire acpi_iommu_fwspec_ops()
iommu: Resolve fwspec ops automatically
iommu/mediatek-v1: Clean up redundant fwspec checks
RDMA/usnic: Use iommu_paging_domain_alloc()
wifi: ath11k: Use iommu_paging_domain_alloc()
wifi: ath10k: Use iommu_paging_domain_alloc()
drm/msm: Use iommu_paging_domain_alloc()
vhost-vdpa: Use iommu_paging_domain_alloc()
...
|
|
Pull documentation updates from Jonathan Corbet:
"Nothing hugely exciting happening in the documentation tree this time
around, mostly more of the usual:
- More Spanish, Italian, and Chinese translations
- A new script, scripts/checktransupdate.py, can be used to see which
commits have touched an (English) document since a given
translation was last updated.
- A couple of "best practices" suggestions (on Link: tags and
off-list discussions) that were not entirely at consensus level,
but I concluded they were close enough to accept.
- Some nice cleanups removing documentation for kernel parameters
that have not been recognized for ... a long time.
...along with the usual updates, typo fixes, and such"
* tag 'docs-6.11' of git://git.lwn.net/linux: (57 commits)
Documentation: Document user_events ioctl code
docs/pinctrl: fix typo in mapping example
docs: maintainer: discourage taking conversations off-list
docs: driver-model: platform: update the definition of platform_driver
docs/sp_SP: Add translation for scheduler/sched-design-CFS.rst
writing_musb_glue_layer.rst: Fix broken URL
zh_CN/admin-guide: one typo fix
docs/zh_CN/virt: Update the translation of guest-halt-polling.rst
Documentation: add reference from dynamic debug to loglevel kernel params
Documentation: best practices for using Link trailers
Documentation: fix links to mailing list services
Documentation: exception-tables.rst: Fix the wrong steps referenced
docs/zh_CN: add process/researcher-guidelines Chinese translation
Documentation/tools/rv: fix document header
docs/sp_SP: Add translation of process/maintainer-kvm-x86.rst
docs/admin-guide/mm: correct typo 'quired' to 'queried'
Add libps2 to the input section of driver-api
Docs/mm/index: move allocation profiling document to unsorted documents chapter
Docs/mm/index: rename 'Legacy Documentation' to 'Unsorted Documentation'
Docs/mm/index: Remove 'Memory Management Guide' chapter marker
...
|
|
* Fix some typos, incomplete or confusing phrases.
* Split paragraphs where appropriate.
* List the same error code multiple times,
if it has multiple possible causes.
* Bring wording closer to the man page wording,
which has undergone more thorough review
(esp. for LANDLOCK_ACCESS_FS_WRITE_FILE).
* Small semantic clarifications
* Call the ephemeral port range "ephemeral"
* Clarify reasons for EFAULT in landlock_add_rule()
* Clarify @rule_type doc for landlock_add_rule()
This is a collection of small fixes which I collected when preparing the
corresponding man pages [1].
Cc: Alejandro Colomar <alx@kernel.org>
Cc: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20240715155554.2791018-1-gnoack@google.com [1]
Signed-off-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20240715160328.2792835-2-gnoack@google.com
[mic: Add label to link, fix formatting spotted by make htmldocs,
synchronize userspace-api documentation's date]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New sensor drivers: gc05a2, gc08a3 and imx283
- New serializer/deserializer drivers: max96714 and max96717
- New JPEG encoder driver: e5010
- Support for Raspberry Pi PiSP Backend (BE) ISP driver
- Old documentation for av7110 driver removed, as a new version was
added as Documentation/userspace-api/media/dvb/legacy*.rst
- atompisp: Linux firmwares are now available, so drop firmware-related
task from TODO and update firmware logic
- The imx258 driver has gained several improvements
- wave5 driver has gained support for HEVC decoding
- em28xx gained support for MyGica UTV3
- av7110 budget-patch driver removed
- Lots of other cleanups, improvements and fixes
* tag 'media/v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (301 commits)
media: raspberrypi: Switch to remove_new
media: uapi: pisp_be_config: Add extra config fields
media: uapi: pisp_be_config: Re-sort pisp_be_tiles_config
media: uapi: pisp_common: Capitalize all macros
media: uapi: pisp_common: Add 32 bpp format test
media: uapi: pisp_be_config: Drop BIT() from uAPI
media: stm32: dcmipp: correct error handling in dcmipp_create_subdevs
media: atomisp: Fix spelling mistakes in sh_css_sp.c
media: atomisp: Fix spelling mistake in ia_css_debug.c
media: atomisp: Fix spelling mistake in hmm_bo.c
media: atomisp: Fix spelling mistake in ia_css_eed1_8.host.c
media: atomisp: Fix spelling mistake in sh_css_internal.h
media: atomisp: Fix spelling mistake "pipline" -> "pipeline"
media: atomisp: Remove unused GPIO related defines and APIs
media: atomisp: Replace COMPILATION_ERROR_IF() by static_assert()
media: atomisp: Clean up unused macros from math_support.h
media: atomisp: csi2-bridge: Add DMI quirk for OV5693 on Xiaomi Mipad2
media: atomisp: Update TODO
media: atomisp: Prefix firmware paths with "intel/ipu/"
media: atomisp: Remove firmware_name module parameter
...
|
|
The user events trace subsystem uses the 0x2A/'*' code for ioctls. These
are published via the uapi/linux/user_events.h header file.
Add a line indicating user events as the owner of the 0x2A/'*' code and
reserve the first 32 sequence numbers.
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240715181413.1157-1-beaub@linux.microsoft.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"The majority of added lines are two new modules: the GPIO virtual
consumer module that improves our ability to add automated tests for
the kernel API and the "sloppy" logic analyzer module that uses the
GPIO API to implement a coarse-grained debugging tool for useful for
remote development.
Other than that we have the usual assortment of various driver
extensions, improvements to the core GPIO code, DT-bindings and other
documentation updates as well as an extension to the interrupt
simulator:
GPIOLIB core:
- rework kfifo handling rework in the character device code
- improve the labeling of GPIOs requested as interrupts and show more
info on interrupt-only GPIOs in debugfs
- remove unused APIs
- unexport interfaces that are only used from the core GPIO code
- drop the return value from gpiochip_set_desc_names() as it cannot
fail
- move a string array definition out of a header and into a specific
compilation unit
- convert the last user of gpiochip_get_desc() other than GPIO core
to using a safer alternative
- use array_index_nospec() where applicable
New drivers:
- add a "virtual GPIO consumer" module that allows requesting GPIOs
from actual hardware and driving tests of the in-kernel GPIO API
from user-space over debugfs
- add a GPIO-based "sloppy" logic analyzer module useful for "first
glance" debugging on remote boards
Driver improvements:
- add support for a new model to gpio-pca953x
- lock GPIOs as interrupts in gpio-sim when the lines are requested
as irqs via the simulator domain + some other minor improvements
- improve error reporting in gpio-syscon
- convert gpio-ath79 to using dynamic GPIO base and range
- use pcibios_err_to_errno() for converting PCIBIOS error codes to
errno vaues in gpio-amd8111 and gpio-rdc321x
- allow building gpio-brcmstb for the BCM2835 architecture
DT bindings:
- convert DT bindings for lsi,zevio, mpc8xxx, and atmel to DT schema
- document new properties for aspeed,gpio, fsl,qoriq-gpio and
gpio-vf610
- document new compatibles for pca953x and fsl,qoriq-gpio
Documentation:
- document stricter behavior of the GPIO character device uAPI with
regards to reconfiguring requested line without direction set
- clarify the effect of the active-low flag on line values and edges
- remove documentation for the legacy GPIO API in order to stop
tempting people to use it
- document the preference for using pread() for reading edge events
in the sysfs API
Other:
- add an extended initializer to the interrupt simulator allowing to
specify a number of callbacks callers can use to be notified about
irqs being requested and released"
* tag 'gpio-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (41 commits)
gpio: mc33880: Convert comma to semicolon
gpio: virtuser: actually use the "trimmed" local variable
dt-bindings: gpio: convert Atmel GPIO to json-schema
gpio: virtuser: new virtual testing driver for the GPIO API
dt-bindings: gpio: vf610: Allow gpio-line-names to be set
gpio: sim: lock GPIOs as interrupts when they are requested
genirq/irq_sim: add an extended irq_sim initializer
dt-bindings: gpio: fsl,qoriq-gpio: Add compatible string fsl,ls1046a-gpio
gpiolib: unexport gpiochip_get_desc()
gpio: add sloppy logic analyzer using polling
Documentation: gpio: Reconfiguration with unset direction (uAPI v2)
Documentation: gpio: Reconfiguration with unset direction (uAPI v1)
dt-bindings: gpio: fsl,qoriq-gpio: add common property gpio-line-names
gpio: ath79: convert to dynamic GPIO base allocation
pinctrl: da9062: replace gpiochip_get_desc() with gpio_device_get_desc()
gpiolib: put gpio_suffixes in a single compilation unit
Documentation: gpio: Clarify effect of active low flag on line edges
Documentation: gpio: Clarify effect of active low flag on line values
gpiolib: Remove data-less gpiochip_add() function
gpio: sim: use devm_mutex_init()
...
|
|
Adds a misc driver for Marvell CN10K DPI(DMA Engine) device's physical
function which initializes DPI DMA hardware's global configuration and
enables hardware mailbox channels between physical function (PF) and
it's virtual functions (VF). VF device drivers (User space drivers) use
this hw mailbox to communicate any required device configuration on it's
respective VF device. Accordingly, this DPI PF driver provisions the
VF device resources.
At the hardware level, the DPI physical function (PF) acts as a management
interface to setup the VF device resources, VF devices are only provisioned
to handle or control the actual DMA Engine's data transfer capabilities.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Reviewed-by: Srujana Challa <schalla@marvell.com>
Link: https://lore.kernel.org/r/20240706153009.3775333-1-vattunuru@marvell.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Documentation/userspace-api/iommu.rst file has become outdated due
to the removal of associated structures and APIs.
Specifically, struct such as iommu_cache_invalidate_info and guest
pasid related uapi were removed in commit 0c9f17877891 ("iommu:
Remove guest pasid related interfaces and definitions").
And the corresponding uapi/linux/iommu.h file was removed in
commit 00a9bc607043 ("iommu: Move iommu fault data to
linux/iommu.h").
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20240702120617.26882-1-mark-pk.tsai@mediatek.com
[will: Remove stale reference to 'iommu' from index.rst]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
To prevent conflicts with other ioctl numbers to allow strace to have an
idea of what is happening, add the range of ioctls for the trace buffer
mapping from _IO("T", 0x1) to the range of "R" 0x20 - 0x2F.
Link: https://lore.kernel.org/linux-trace-kernel/20240630105322.GA17573@altlinux.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240630213626.GA23566@altlinux.org/
Cc: Jonathan Corbet <corbet@lwn.net>
Fixes: cf9f0f7c4c5bb ("tracing: Allow user-space mapping of the ring-buffer")
Link: https://lore.kernel.org/20240702153354.367861db@rorschach.local.home
Reported-by: "Dmitry V. Levin" <ldv@strace.io>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Update description of reconfiguration rules, adding requirement that a
direction flag be set to enable changing configuration for a line.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240626052925.174272-5-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Update description of reconfiguration rules, adding requirement that a
direction flag be set or the configuration is considered invalid.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240626052925.174272-4-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add Raspberry Pi compressed RAW Bayer formats.
The compression algorithm description is provided by Nick Hollinghurst
<nick.hollinghurst@raspberrypi.com> from Raspberry Pi.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add format description for the PiSP Back End configuration parameter
buffer.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add BGR48 and RGB48 16-bit per component image formats.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The Y10P, Y12P and Y14P format variants are packed according to
the RAW10, RAW12 and RAW14 formats as defined by the MIPI CSI-2
specification. Document it.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
When MFD_NOEXEC_SEAL was introduced, there was one big mistake: it didn't
have proper documentation. This led to a lot of confusion, especially
about whether or not memfd created with the MFD_NOEXEC_SEAL flag is
sealable. Before MFD_NOEXEC_SEAL, memfd had to explicitly set
MFD_ALLOW_SEALING to be sealable, so it's a fair question.
As one might have noticed, unlike other flags in memfd_create,
MFD_NOEXEC_SEAL is actually a combination of multiple flags. The idea is
to make it easier to use memfd in the most common way, which is NOEXEC +
F_SEAL_EXEC + MFD_ALLOW_SEALING. This works with sysctl vm.noexec to help
existing applications move to a more secure way of using memfd.
Proposals have been made to put MFD_NOEXEC_SEAL non-sealable, unless
MFD_ALLOW_SEALING is set, to be consistent with other flags [1], Those
are based on the viewpoint that each flag is an atomic unit, which is a
reasonable assumption. However, MFD_NOEXEC_SEAL was designed with the
intent of promoting the most secure method of using memfd, therefore a
combination of multiple functionalities into one bit.
Furthermore, the MFD_NOEXEC_SEAL has been added for more than one year,
and multiple applications and distributions have backported and utilized
it. Altering ABI now presents a degree of risk and may lead to
disruption.
MFD_NOEXEC_SEAL is a new flag, and applications must change their code to
use it. There is no backward compatibility problem.
When sysctl vm.noexec == 1 or 2, applications that don't set
MFD_NOEXEC_SEAL or MFD_EXEC will get MFD_NOEXEC_SEAL memfd. And
old-application might break, that is by-design, in such a system vm.noexec
= 0 shall be used. Also no backward compatibility problem.
I propose to include this documentation patch to assist in clarifying the
semantics of MFD_NOEXEC_SEAL, thereby preventing any potential future
confusion.
Finally, I would like to express my gratitude to David Rheinsberg and
Barnabás Pőcze for initiating the discussion on the topic of sealability.
[1]
https://lore.kernel.org/lkml/20230714114753.170814-1-david@readahead.eu/
[jeffxu@chromium.org: updates per Randy]
Link: https://lkml.kernel.org/r/20240611034903.3456796-2-jeffxu@chromium.org
[jeffxu@chromium.org: v3]
Link: https://lkml.kernel.org/r/20240611231409.3899809-2-jeffxu@chromium.org
Link: https://lkml.kernel.org/r/20240607203543.2151433-2-jeffxu@google.com
Signed-off-by: Jeff Xu <jeffxu@chromium.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Barnabás Pőcze <pobrn@protonmail.com>
Cc: Daniel Verkamp <dverkamp@chromium.org>
Cc: David Rheinsberg <david@readahead.eu>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Rename 'st-vgxy61' to 'vgxy61', dropping the vendor prefix to follow the
same naming scheme as the vast majority of device drivers.
The device tree binding does not fall into binding rename exceptions and
therefore must not be changed. Keep its legacy name.
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The documentation does not make sufficiently clear that edge polarity is
based on changes to the logical line values, and that the physical
polarity of edges is dependent on the active low flag.
Clarify the relationship between the active low flag and edge polarity
for the functions that read edge events.
Suggested-by: David C. Rankin <drankinatty@gmail.com>
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240610092157.9147-3-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The documentation does not make sufficiently clear that the uAPI deals with
logical line values, nor does it describe the influence of the active low
flag on the mapping between physical and logical line values.
Clarify the relationship between physical and logical line values and the
effect of the active low flag for ioctls passing line values.
Suggested-by: David C. Rankin <drankinatty@gmail.com>
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240610092157.9147-2-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add a control V4L2_CID_MPEG_VIDEO_AVERAGE_QP to report the average QP
value of the current encoded frame. The value applies to the last
dequeued capture buffer.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Linux 6.10-rc3
This is needed for the ipu6 and mei fixes.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
In legacy sysfs GPIO, when using poll(2) on the sysfs GPIO value for
state change awaiting, a subsequent read(2) is required for consuming
the event, which the doc recommends the use of lseek(2) or
close-and-reopen to reset the file offset afterwards.
The recommendations however, require at least 2 syscalls to consume
the event. Gladly, use of pread(2) require only 1 syscall for the
consumption. Let's advertise this usage by prioritizing its placement.
Signed-off-by: Huichun Feng <foxhoundsk.tw@gmail.com>
Link: https://lore.kernel.org/r/20240609173728.2950808-1-foxhoundsk.tw@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Description and control were out of sync.
Signed-off-by: Fritz Koenig <frkoenig@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The documentation in one occasion mentions the
VIDIOC_SUBDEV_STREAM_FL_ACTIVE flag. This was meant to be
V4L2_SUBDEV_STREAM_FL_ACTIVE as it's a flag, not an IOCTL. Fix it.
Fixes: cd2c75454d74 ("media: Documentation: Document S_ROUTING behaviour")
Reported-by: Samuel Wein PhD <sam@samwein.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add documentation for mseal().
Link: https://lkml.kernel.org/r/20240415163527.626541-5-jeffxu@chromium.org
Signed-off-by: Jeff Xu <jeffxu@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Stephen Röttger <sroettger@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Amer Al Shanawany <amer.shanawany@gmail.com>
Cc: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.10-rc1. Nothing major here, just lots of new drivers and updates
for apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
misc: ntsync: mark driver as "broken" to prevent from building
spmi: pmic-arb: Add multi bus support
spmi: pmic-arb: Register controller for bus instead of arbiter
spmi: pmic-arb: Make core resources acquiring a version operation
spmi: pmic-arb: Make the APID init a version operation
spmi: pmic-arb: Fix some compile warnings about members not being described
dt-bindings: spmi: Deprecate qcom,bus-id
dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
spmi: hisi-spmi-controller: Do not override device identifier
dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
spmi: make spmi_bus_type const
extcon: adc-jack: Document missing struct members
extcon: realtek: Remove unused of_gpio.h
extcon: usbc-cros-ec: Convert to platform remove callback returning void
extcon: usb-gpio: Convert to platform remove callback returning void
extcon: max77843: Convert to platform remove callback returning void
extcon: max3355: Convert to platform remove callback returning void
extcon: intel-mrfld: Convert to platform remove callback returning void
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"This brings ioctl control to Landlock, contributed by Günther Noack.
This also adds him as a Landlock reviewer, and fixes an issue in the
sample"
* tag 'landlock-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
MAINTAINERS: Add Günther Noack as Landlock reviewer
fs/ioctl: Add a comment to keep the logic in sync with LSM policies
MAINTAINERS: Notify Landlock maintainers about changes to fs/ioctl.c
landlock: Document IOCTL support
samples/landlock: Add support for LANDLOCK_ACCESS_FS_IOCTL_DEV
selftests/landlock: Exhaustive test for the IOCTL allow-list
selftests/landlock: Check IOCTL restrictions for named UNIX domain sockets
selftests/landlock: Test IOCTLs on named pipes
selftests/landlock: Test ioctl(2) and ftruncate(2) with open(O_PATH)
selftests/landlock: Test IOCTL with memfds
selftests/landlock: Test IOCTL support
landlock: Add IOCTL access right for character and block devices
samples/landlock: Fix incorrect free in populate_ruleset_net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New V4L2 ioctl VIDIOC_REMOVE_BUFS
- experimental support for using generic metaformats on V4L2 core
- New drivers: Intel IPU6 controller driver, Broadcom BCM283x/BCM271x
- More cleanups at atomisp driver
- Usual bunch of driver cleanups, improvements and fixes
* tag 'media/v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (328 commits)
media: bcm2835-unicam: Depend on COMMON_CLK
Revert "media: v4l2-ctrls: show all owned controls in log_status"
media: ov2740: Ensure proper reset sequence on probe()
media: intel/ipu6: Don't print user-triggerable errors to kernel log
media: bcm2835-unicam: Fix driver path in MAINTAINERS
media: bcm2835-unicam: Fix a NULL vs IS_ERR() check
media: bcm2835-unicam: Do not print error when irq not found
media: bcm2835-unicam: Do not replace IRQ retcode during probe
media: bcm2835-unicam: Convert to platform remove callback returning void
media: media: intel/ipu6: Fix spelling mistake "remappinp" -> "remapping"
media: intel/ipu6: explicitly include vmalloc.h
media: cec.h: Fix kerneldoc
media: uvcvideo: Refactor iterators
media: v4l: async: refactor v4l2_async_create_ancillary_links
media: intel/ipu6: Don't re-allocate memory for firmware
media: dvb-frontends: tda10048: Fix integer overflow
media: tc358746: Use the correct div_ function
media: i2c: st-mipid02: Use the correct div function
media: tegra-vde: Refactor timeout handling
media: stk1160: Use min macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd
passing functionality. New method based on Tarjan's Strongly
Connected Components algorithm should be both faster and remove a
lot of workarounds we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP
packets and forwarding them together. Useful for small switches /
routers which lack basic checksum offload in some scenarios (e.g.
PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't use
NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
address labels, netdev threaded NAPI sysfs files, bonding driver's
sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
of the link information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory
accounting, RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2%
PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a |
