| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 6.10-rc4.
Included in here are:
- thunderbolt debugfs bugfix
- USB typec bugfixes
- kcov usb bugfix
- xhci bugfixes
- usb-storage bugfix
- dt-bindings bugfix
- cdc-wdm log message spam bugfix
All of these, except for the last cdc-wdm log level change, have been
in linux-next for a while with no reported problems. The cdc-wdm
bugfix has been tested by syzbot and proved to fix the reported cpu
lockup issues when the log is constantly spammed by a broken device"
* tag 'usb-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: class: cdc-wdm: Fix CPU lockup caused by excessive log messages
xhci: Handle TD clearing for multiple streams case
xhci: Apply broken streams quirk to Etron EJ188 xHCI host
xhci: Apply reset resume quirk to Etron EJ188 xHCI host
xhci: Set correct transferred length for cancelled bulk transfers
usb-storage: alauda: Check whether the media is initialized
usb: typec: ucsi: Ack also failed Get Error commands
kcov, usb: disable interrupts in kcov_remote_start_usb_softirq
dt-bindings: usb: realtek,rts5411: Add missing "additionalProperties" on child nodes
usb: typec: tcpm: Ignore received Hard Reset in TOGGLING state
usb: typec: tcpm: fix use-after-free case in tcpm_register_source_caps
USB: xen-hcd: Traverse host/ when CONFIG_USB_XEN_HCD is selected
usb: typec: ucsi: glink: increase max ports for x1e80100
Revert "usb: chipidea: move ci_ulpi_init after the phy initialization"
thunderbolt: debugfs: Fix margin debugfs node creation condition
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a number of small char/misc and iio driver fixes for
6.10-rc4. Included in here are the following:
- iio driver fixes for a bunch of reported problems.
- mei driver fixes for a number of reported issues.
- amiga parport driver build fix.
- .editorconfig fix that was causing lots of unintended whitespace
changes to happen to files when they were being edited. Unless we
want to sweep the whole tree and remove all trailing whitespace at
once, this is needed for the .editorconfig file to be able to be
used at all. This change is required because the original
submitters never touched older files in the tree.
- jfs bugfix for a buffer overflow
The jfs bugfix is in here as I didn't know where else to put it, and
it's been ignored for a while as the filesystem seems to be abandoned
and I'm tired of seeing the same issue reported in multiple places.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (25 commits)
.editorconfig: remove trim_trailing_whitespace option
jfs: xattr: fix buffer overflow for invalid xattr
misc: microchip: pci1xxxx: Fix a memory leak in the error handling of gp_aux_bus_probe()
misc: microchip: pci1xxxx: fix double free in the error handling of gp_aux_bus_probe()
parport: amiga: Mark driver struct with __refdata to prevent section mismatch
mei: vsc: Fix wrong invocation of ACPI SID method
mei: vsc: Don't stop/restart mei device during system suspend/resume
mei: me: release irq in mei_me_pci_resume error path
mei: demote client disconnect warning on suspend to debug
iio: inkern: fix channel read regression
iio: imu: inv_mpu6050: stabilized timestamping in interrupt
iio: adc: ad7173: Fix sampling frequency setting
iio: adc: ad7173: Clear append status bit
iio: imu: inv_icm42600: delete unneeded update watermark call
iio: imu: inv_icm42600: stabilized timestamp in interrupt
iio: invensense: fix odr switching to same value
iio: adc: ad7173: Remove index from temp channel
iio: adc: ad7173: Add ad7173_device_info names
iio: adc: ad7173: fix buffers enablement for ad7176-2
iio: temperature: mlx90635: Fix ERR_PTR dereference in mlx90635_probe()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- fix potential read out of bounds in hid-asus (Andrew Ballance)
- fix endian-conversion on little endian systems in intel-ish-hid (Arnd
Bergmann)
- A couple of new input event codes (Aseda Aboagye)
- errors handling fixes in hid-nvidia-shield (Chen Ni), hid-nintendo
(Christophe JAILLET), hid-logitech-dj (José Expósito)
- current leakage fix while the device is in suspend on a i2c-hid
laptop (Johan Hovold)
- other assorted smaller fixes and device ID / quirk entry additions
* tag 'for-linus-2024060801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: Ignore battery for ELAN touchscreens 2F2C and 4116
HID: i2c-hid: elan: fix reset suspend current leakage
dt-bindings: HID: i2c-hid: elan: add 'no-reset-on-power-off' property
dt-bindings: HID: i2c-hid: elan: add Elan eKTH5015M
dt-bindings: HID: i2c-hid: add dedicated Ilitek ILI2901 schema
input: Add support for "Do Not Disturb"
input: Add event code for accessibility key
hid: asus: asus_report_fixup: fix potential read out of bounds
HID: logitech-hidpp: add missing MODULE_DESCRIPTION() macro
HID: intel-ish-hid: fix endian-conversion
HID: nintendo: Fix an error handling path in nintendo_hid_probe()
HID: logitech-dj: Fix memory leak in logi_dj_recv_switch_to_dj_mode()
HID: core: remove unnecessary WARN_ON() in implement()
HID: nvidia-shield: Add missing check for input_ff_create_memless
HID: intel-ish-hid: Fix build error for COMPILE_TEST
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
1st set of IIO fixes for the 6.10 cycle.
The usual mixed bag of old and new driver bugs plus one core issue that
highlighted we have some documentation issues that we need to fix
as a follow up action.
core in kernel interface
- Wrong return value documentation didn't help with an error in
a cleanup. Result is that thermal is failing to read the temperature.
adi,ad3552r
- Fix DT binding output range sign error.
adi,ad5592r
- Wrong scaling on temperature channel.
adi,ad7173
- Driver assumed all supported devices had input buffers. Make sure not to
enable them on the ad7176-2 which doesn't.
- Add some missing device names for recently added models.
- Drop an unneeded zero index on the single temperature channel.
- Clear buffered capture specific control bit when returning to on
demand sampling which otherwise no longer works.
- Make sampling frequency per channel rather than just setting it for the
first channel.
adi,ad9467
- Capital S for sign of channel whereas ABI is lowercase.
bosch,bmi323
- Make sure to release the trigger even on error paths in the trigger
handler as otherwise there is no path to recover.
bosch,bmp280
- Avoid an overflow in calculating the temperature.
invensense,timestamp helper
- Fix case where ODR is being switched to the existing ODR an update that
never finishes.
- Fix an issue with the timestamp being updated whilst still handling
previous interrupt (icm42600 and mpu6050)
invensense,icm42600
- Don't update the watermark parameters twice.
melexis,mlx90635
- Fix variable returned as error code.
* tag 'iio-fixes-for-6.10a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: inkern: fix channel read regression
iio: imu: inv_mpu6050: stabilized timestamping in interrupt
iio: adc: ad7173: Fix sampling frequency setting
iio: adc: ad7173: Clear append status bit
iio: imu: inv_icm42600: delete unneeded update watermark call
iio: imu: inv_icm42600: stabilized timestamp in interrupt
iio: invensense: fix odr switching to same value
iio: adc: ad7173: Remove index from temp channel
iio: adc: ad7173: Add ad7173_device_info names
iio: adc: ad7173: fix buffers enablement for ad7176-2
iio: temperature: mlx90635: Fix ERR_PTR dereference in mlx90635_probe()
iio: imu: bmi323: Fix trigger notification in case of error
iio: dac: ad5592r: fix temperature channel scaling value
iio: pressure: bmp280: Fix BMP580 temperature reading
dt-bindings: iio: dac: fix ad354xr output range
iio: adc: ad9467: fix scan type sign
|
|
When the power supply is shared with other peripherals the reset line
can be wired in such a way that it can remain deasserted regardless of
whether the supply is on or not.
This is important as it can be used to avoid holding the controller in
reset for extended periods of time when it remains powered, something
which can lead to increased power consumption. Leaving reset deasserted
also avoids leaking current through the reset circuitry pull-up
resistors.
Add a new 'no-reset-on-power-off' devicetree property which can be used
by the OS to determine when reset needs to be asserted on power down.
Note that this property can also be used when the supply cannot be
turned off by the OS at all.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240507144821.12275-4-johan+linaro@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Add a compatible string for the Elan eKTH5015M touch controller.
Judging from the current binding and commit bd3cba00dcc6 ("HID: i2c-hid:
elan: Add support for Elan eKTH6915 i2c-hid touchscreens"), eKTH5015M
appears to be compatible with eKTH6915. Notably the power-on sequence is
the same.
While at it, drop a redundant label from the example.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240507144821.12275-3-johan+linaro@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The Ilitek ILI2901 touch screen controller was apparently incorrectly
added to the Elan eKTH6915 schema simply because it also has a reset
gpio and is currently managed by the Elan driver in Linux.
The two controllers are not related even if an unfortunate wording in
the commit message adding the Ilitek compatible made it sound like they
were.
Add a dedicated schema for the ILI2901 which does not specify the I2C
address (which is likely 0x41 rather than 0x10 as for other Ilitek touch
controllers) to avoid cluttering the Elan schema with unrelated devices
and to make it easier to find the correct schema when adding further
Ilitek controllers.
Fixes: d74ac6f60a7e ("dt-bindings: HID: i2c-hid: elan: Introduce Ilitek ili2901")
Cc: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240507144821.12275-2-johan+linaro@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix regression in 'interrupt-map' handling affecting Apple M1 mini
(at least)
- Fix binding example warning in stm32 st,mlahb binding
- Fix schema error in Allwinner platform binding causing lots of
spurious warnings
- Add missing MODULE_DESCRIPTION() to DT kunit tests
* tag 'devicetree-fixes-for-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: property: Fix fw_devlink handling of interrupt-map
of/irq: Factor out parsing of interrupt-map parent phandle+args from of_irq_parse_raw()
dt-bindings: arm: stm32: st,mlahb: Drop spurious "reg" property from example
dt-bindings: arm: sunxi: Fix incorrect '-' usage
of: of_test: add MODULE_DESCRIPTION()
|
|
child nodes
All nodes need an explicit additionalProperties or unevaluatedProperties
unless a $ref has one that's false. As that is not the case with
usb-device.yaml, "additionalProperties" is needed here.
Fixes: c44d9dab31d6 ("dt-bindings: usb: Add downstream facing ports to realtek binding")
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20240523194500.2958192-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and netfilter.
Current release - regressions:
- gro: initialize network_offset in network layer
- tcp: reduce accepted window in NEW_SYN_RECV state
Current release - new code bugs:
- eth: mlx5e: do not use ptp structure for tx ts stats when not
initialized
- eth: ice: check for unregistering correct number of devlink params
Previous releases - regressions:
- bpf: Allow delete from sockmap/sockhash only if update is allowed
- sched: taprio: extend minimum interval restriction to entire cycle
too
- netfilter: ipset: add list flush to cancel_gc
- ipv4: fix address dump when IPv4 is disabled on an interface
- sock_map: avoid race between sock_map_close and sk_psock_put
- eth: mlx5: use mlx5_ipsec_rx_status_destroy to correctly delete
status rules
Previous releases - always broken:
- core: fix __dst_negative_advice() race
- bpf:
- fix multi-uprobe PID filtering logic
- fix pkt_type override upon netkit pass verdict
- netfilter: tproxy: bail out if IP has been disabled on the device
- af_unix: annotate data-race around unix_sk(sk)->addr
- eth: mlx5e: fix UDP GSO for encapsulated packets
- eth: idpf: don't enable NAPI and interrupts prior to allocating Rx
buffers
- eth: i40e: fully suspend and resume IO operations in EEH case
- eth: octeontx2-pf: free send queue buffers incase of leaf to inner
- eth: ipvlan: dont Use skb->sk in ipvlan_process_v{4,6}_outbound"
* tag 'net-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
netdev: add qstat for csum complete
ipvlan: Dont Use skb->sk in ipvlan_process_v{4,6}_outbound
net: ena: Fix redundant device NUMA node override
ice: check for unregistering correct number of devlink params
ice: fix 200G PHY types to link speed mapping
i40e: Fully suspend and resume IO operations in EEH case
i40e: factoring out i40e_suspend/i40e_resume
e1000e: move force SMBUS near the end of enable_ulp function
net: dsa: microchip: fix RGMII error in KSZ DSA driver
ipv4: correctly iterate over the target netns in inet_dump_ifaddr()
net: fix __dst_negative_advice() race
nfc/nci: Add the inconsistency check between the input data length and count
MAINTAINERS: dwmac: starfive: update Maintainer
net/sched: taprio: extend minimum interval restriction to entire cycle too
net/sched: taprio: make q->picos_per_byte available to fill_sched_entry()
netfilter: nft_fib: allow from forward/input without iif selector
netfilter: tproxy: bail out if IP has been disabled on the device
netfilter: nft_payload: skbuff vlan metadata mangle support
net: ti: icssg-prueth: Fix start counter for ft1 filter
sock_map: avoid race between sock_map_close and sk_psock_put
...
|
|
"reg" is not documented nor used for st,mlahb, so drop it from the
example to fix the warning:
Documentation/devicetree/bindings/arm/stm32/st,mlahb.example.dtb: ahb@38000000: Unevaluated properties are not allowed ('reg' was unexpected)
from schema $id: http://devicetree.org/schemas/arm/stm32/st,mlahb.yaml#
Since "reg" is dropped, the unit-address must be as well.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240523154208.2457864-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Commit 6bc6bf8a940a ("dt-bindings: arm: sunxi: document Anbernic RG35XX
handheld gaming device variants") mistakenly added '-' on each line
which created empty (i.e. description only) schemas matching anything.
This causes validation to fail on all the root node compatibles as
there are multiple oneOf clauses passing.
Fixes: 6bc6bf8a940a ("dt-bindings: arm: sunxi: document Anbernic RG35XX handheld gaming device variants")
Reviewed-by: Ryan Walklin <ryan@testtoast.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240503154402.967632-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
constraints
The child nodes are missing "additionalProperties" constraints which
means any undocumented properties or child nodes are allowed. Add the
constraints and all the undocumented properties exposed by the fix.
Fixes: f562202fedad ("dt-bindings: net: pse-pd: Add bindings for TPS23881 PSE controller")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240523171750.2837331-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
"additionalProperties" constraints
The child nodes are missing "additionalProperties" constraints which
means any undocumented properties or child nodes are allowed. Add the
constraints, and fix the fallout of wrong manager node regex and
missing properties.
Fixes: 9c1de033afad ("dt-bindings: net: pse-pd: Add bindings for PD692x0 PSE controller")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240523171732.2836880-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix output range, as per datasheet must be -2.5 to 7.5.
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Fixes: b0a96c5f599e ("dt-bindings: iio: dac: Add adi,ad3552r.yaml")
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240503185528.2043127-1-adureghello@baylibre.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"There is one new driver and then most of the changes are the device
tree bindings conversions to yaml.
New driver:
- Epson RX8111
Drivers:
- Many Device Tree bindings conversions to dtschema
- pcf8563: wakeup-source support"
* tag 'rtc-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
pcf8563: add wakeup-source support
rtc: rx8111: handle VLOW flag
rtc: rx8111: demote warnings to debug level
rtc: rx6110: Constify struct regmap_config
dt-bindings: rtc: convert trivial devices into dtschema
dt-bindings: rtc: stmp3xxx-rtc: convert to dtschema
dt-bindings: rtc: pxa-rtc: convert to dtschema
rtc: Add driver for Epson RX8111
dt-bindings: rtc: Add Epson RX8111
rtc: mcp795: drop unneeded MODULE_ALIAS
rtc: nuvoton: Modify part number value
rtc: test: Split rtc unit test into slow and normal speed test
dt-bindings: rtc: nxp,lpc1788-rtc: convert to dtschema
dt-bindings: rtc: digicolor-rtc: move to trivial-rtc
dt-bindings: rtc: alphascale,asm9260-rtc: convert to dtschema
dt-bindings: rtc: armada-380-rtc: convert to dtschema
rtc: cros-ec: provide ID table for avoiding fallback match
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a change to input core to trim amount of keys data in modalias string
in case when a device declares too many keys and they do not fit in
uevent buffer instead of reporting an error which results in uevent
not being generated at all
- support for Machenike G5 Pro Controller added to xpad driver
- support for FocalTech FT5452 and FT8719 added to edt-ft5x06
- support for new SPMI vibrator added to pm8xxx-vibrator driver
- missing locking added to cyapa touchpad driver
- removal of unused fields in various driver structures
- explicit initialization of i2c_device_id::driver_data to 0 dropped
from input drivers
- other assorted fixes and cleanups.
* tag 'input-for-v6.10-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (24 commits)
Input: edt-ft5x06 - add support for FocalTech FT5452 and FT8719
dt-bindings: input: touchscreen: edt-ft5x06: Document FT5452 and FT8719 support
Input: xpad - add support for Machenike G5 Pro Controller
Input: try trimming too long modalias strings
Input: drop explicit initialization of struct i2c_device_id::driver_data to 0
Input: zet6223 - remove an unused field in struct zet6223_ts
Input: chipone_icn8505 - remove an unused field in struct icn8505_data
Input: cros_ec_keyb - remove an unused field in struct cros_ec_keyb
Input: lpc32xx-keys - remove an unused field in struct lpc32xx_kscan_drv
Input: matrix_keypad - remove an unused field in struct matrix_keypad
Input: tca6416-keypad - remove unused struct tca6416_drv_data
Input: tca6416-keypad - remove an unused field in struct tca6416_keypad_chip
Input: da7280 - remove an unused field in struct da7280_haptic
Input: ff-core - prefer struct_size over open coded arithmetic
Input: cyapa - add missing input core locking to suspend/resume functions
input: pm8xxx-vibrator: add new SPMI vibrator support
dt-bindings: input: qcom,pm8xxx-vib: add new SPMI vibrator module
input: pm8xxx-vibrator: refactor to support new SPMI vibrator
Input: pm8xxx-vibrator - correct VIB_MAX_LEVELS calculation
Input: sur40 - convert le16 to cpu before use
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes for 6.10-rc1. Most of changes are various
device-specific fixes and quirks, while there are a few small changes
in ALSA core timer and module / built-in fixes"
* tag 'sound-fix-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: fix mute/micmute LEDs don't work for ProBook 440/460 G11.
ALSA: core: Enable proc module when CONFIG_MODULES=y
ALSA: core: Fix NULL module pointer assignment at card init
ALSA: hda/realtek: Enable headset mic of JP-IK LEAP W502 with ALC897
ASoC: dt-bindings: stm32: Ensure compatible pattern matches whole string
ASoC: tas2781: Fix wrong loading calibrated data sequence
ASoC: tas2552: Add TX path for capturing AUDIO-OUT data
ALSA: usb-audio: Fix for sampling rates support for Mbox3
Documentation: sound: Fix trailing whitespaces
ALSA: timer: Set lower bound of start tick time
ASoC: codecs: ES8326: solve hp and button detect issue
ASoC: rt5645: mic-in detection threshold modification
ASoC: Intel: sof_sdw_rt_sdca_jack_common: Use name_prefix for `-sdca` detection
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.10-rc1. Nothing major here, just lots of new drivers and updates
for apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
misc: ntsync: mark driver as "broken" to prevent from building
spmi: pmic-arb: Add multi bus support
spmi: pmic-arb: Register controller for bus instead of arbiter
spmi: pmic-arb: Make core resources acquiring a version operation
spmi: pmic-arb: Make the APID init a version operation
spmi: pmic-arb: Fix some compile warnings about members not being described
dt-bindings: spmi: Deprecate qcom,bus-id
dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
spmi: hisi-spmi-controller: Do not override device identifier
dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
spmi: make spmi_bus_type const
extcon: adc-jack: Document missing struct members
extcon: realtek: Remove unused of_gpio.h
extcon: usbc-cros-ec: Convert to platform remove callback returning void
extcon: usb-gpio: Convert to platform remove callback returning void
extcon: max77843: Convert to platform remove callback returning void
extcon: max3355: Convert to platform remove callback returning void
extcon: intel-mrfld: Convert to platform remove callback returning void
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the big set of tty/serial driver changes for 6.10-rc1.
Included in here are:
- Usual good set of api cleanups and evolution by Jiri Slaby to make
the serial interfaces move out of the 1990's by using kfifos
instead of hand-rolling their own logic.
- 8250_exar driver updates
- max3100 driver updates
- sc16is7xx driver updates
- exar driver updates
- sh-sci driver updates
- tty ldisc api addition to help refuse bindings
- other smaller serial driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (113 commits)
serial: Clear UPF_DEAD before calling tty_port_register_device_attr_serdev()
serial: imx: Raise TX trigger level to 8
serial: 8250_pnp: Simplify "line" related code
serial: sh-sci: simplify locking when re-issuing RXDMA fails
serial: sh-sci: let timeout timer only run when DMA is scheduled
serial: sh-sci: describe locking requirements for invalidating RXDMA
serial: sh-sci: protect invalidating RXDMA on shutdown
tty: add the option to have a tty reject a new ldisc
serial: core: Call device_set_awake_path() for console port
dt-bindings: serial: brcm,bcm2835-aux-uart: convert to dtschema
tty: serial: uartps: Add support for uartps controller reset
arm64: zynqmp: Add resets property for UART nodes
dt-bindings: serial: cdns,uart: Add optional reset property
serial: 8250_pnp: Switch to DEFINE_SIMPLE_DEV_PM_OPS()
serial: 8250_exar: Keep the includes sorted
serial: 8250_exar: Make type of bit the same in exar_ee_*_bit()
serial: 8250_exar: Use BIT() in exar_ee_read()
serial: 8250_exar: Switch to use dev_err_probe()
serial: 8250_exar: Return directly from switch-cases
serial: 8250_exar: Decrease indentation level
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.10-rc1.
Nothing hugely earth-shattering, just constant forward progress for
hardware support of new devices and cleanups over the drivers.
Included in here are:
- Thunderbolt / USB 4 driver updates
- typec driver updates
- dwc3 driver updates
- gadget driver updates
- uss720 driver id additions and fixes (people use USB->arallel port
devices still!)
- onboard-hub driver rename and additions for new hardware
- xhci driver updates
- other small USB driver updates and additions for quirks and api
changes
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
drm/bridge: aux-hpd-bridge: correct devm_drm_dp_hpd_bridge_add() stub
usb: fotg210: Add missing kernel doc description
usb: dwc3: core: Fix unused variable warning in core driver
usb: typec: tipd: rely on i2c_get_match_data()
usb: typec: tipd: fix event checking for tps6598x
usb: typec: tipd: fix event checking for tps25750
dt-bindings: usb: qcom,dwc3: fix interrupt max items
usb: fotg210: Use *-y instead of *-objs in Makefile
usb: phy: tegra: Replace of_gpio.h by proper one
usb: typec: ucsi: displayport: Fix potential deadlock
usb: typec: qcom-pmic-typec: split HPD bridge alloc and registration
usb: musc: Remove unused list 'buffers'
usb: dwc3: Wait unconditionally after issuing EndXfer command
usb: gadget: u_audio: Clear uac pointer when freed.
usb: gadget: u_audio: Fix race condition use of controls after free during gadget unbind.
dt-bindings: usb: dwc3: Add QDU1000 compatible
usb: core: Remove the useless struct usb_devmap which is just a bitmap
MAINTAINERS: Remove {ehci,uhci}-platform.c from ARM/VT8500 entry
USB: usb_parse_endpoint: ignore reserved bits
usb: xhci: compact 'trb_in_td()' arguments
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Core Frameworks:
- Ensure seldom updated triggers have a brightness value before first
update
New Device Support:
- Add support for Simatic IPC Device BX_59A to IPC LEDs Core
- Add support for Qualcomm PMI8950 PWM to LPG Core
New Functionality:
- Add a bunch of new LED function identifiers
- Add support for High Resolution Timers in LED Trigger Patten
Fix-ups:
- Shift out Audio Trigger to the Sound subsystem
- Convert suitable calls to devm_* managed resources
- Device Tree binding adaptions/conversions/creation
- Remove superfluous code/variables/attributes and simplify overall
- Use/convert to new/better APIs/helpers/MACROs instead of
hand-rolling implementations
Bug Fixes:
- Repair enabling Torch Mode from V4L2 on the second LED
- Ensure PWM is disabled when suspending"
* tag 'leds-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (28 commits)
leds: mt6370: Remove unused field 'reg_cfgs' from 'struct mt6370_priv'
leds: lp50xx: Remove unused field 'num_of_banked_leds' from 'struct lp50xx'
leds: lp50xx: Remove unused field 'bank_modules' from 'struct lp50xx_led'
leds: aat1290: Remove unused field 'torch_brightness' from 'struct aat1290_led'
leds: sun50i-a100: Use match_string() helper to simplify the code
leds: pwm: Disable PWM when going to suspend
leds: trigger: pattern: Add support for hrtimer
leds: mt6360: Fix the second LED can not enable torch mode by V4L2
dt-bindings: leds: leds-qcom-lpg: Add support for PMI8950 PWM
leds: qcom-lpg: Add support for PMI8950 PWM
leds: apu: Remove duplicate DMI lookup data
leds: trigger: netdev: Remove not needed call to led_set_brightness in deactivate
dt-bindings: leds: Add LED_FUNCTION_SPEED_* for link speed on LAN/WAN
dt-bindings: leds: Add LED_FUNCTION_MOBILE for mobile network
leds: simatic-ipc-leds-gpio: Add support for module BX-59A
dt-bindings: leds: qcom-lpg: Document PM6150L compatible
dt-bindings: leds: pca963x: Convert text bindings to YAML
leds: an30259a: Use devm_mutex_init() for mutex initialization
leds: mlxreg: Use devm_mutex_init() for mutex initialization
leds: nic78bx: Use devm API to cleanup module's resources
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Device Support:
- Add support for X-Powers AXP717 PMIC to AXP22X
- Add support for Rockchip RK816 PMIC to RK8XX
- Add support for TI TPS65224 PMIC to TPS6594
New Functionality:
- Add Power Off functionality to Rohm BD71828
- Allow I2C SMBus access in Renesas RSMU
Fix-ups:
- Device Tree binding adaptions/conversions/creation
- Shift Intel support over to MSI interrupts
- Generify adding platform data away from being ACPI specific
- Use device core supplied attribute to register sysfs entries
- Replace hand-rolled functionality with generic APIs
- Utilise centrally provided helpers and macros
- Clean-up error handling
- Remove superfluous/duplicated/unused sections
- Trivial; spelling, whitespace, coding-style adaptions
- More Maple Tree conversions"
* tag 'mfd-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (44 commits)
dt-bindings: mfd: Use full path to other schemas
mfd: rsmu: support I2C SMBus access
dt-bindings: mfd: Convert lp873x.txt to json-schema
dt-bindings: mfd: aspeed: Drop 'oneOf' for pinctrl node
dt-bindings: mfd: allwinner,sun6i-a31-prcm: Use hyphens in node names
mfd: ssbi: Remove unused field 'slave' from 'struct ssbi'
mfd: kempld: Remove custom DMI matching code
mfd: cs42l43: Update patching revision check
dt-bindings: mfd: qcom: pm8xxx: Add pm8901 compatible
mfd: timberdale: Remove redundant assignment to variable err
dt-bindings: mfd: qcom,spmi-pmic: Add pbs to SPMI device types
dt-bindings: mfd: syscon: Add ti,am62p-cpsw-mac-efuse compatible
dt-bindings: mfd: qcom,tcsr: Add compatible for SDX75
mfd: axp20x: Convert to use Maple Tree register cache
mfd: bd71828: Remove commented code lines
mfd: intel-m10-bmc: Change staging size to a variable
dt-bindings: mfd: Add ROHM BD71879
mfd: Tidy Kconfig dependency's parentheses
mfd: ocelot-spi: Use spi_sync_transfer()
dt-bindings: mfd: syscon: Add missing simple syscon compatibles
...
|
|
Document FocalTech FT5452 and FT8719 support by adding their compatibles.
Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240521-add-support-ft5452-and-ft8719-touchscreen-v1-1-2a648ac7176b@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull generic phy updates from Vinod Koul:
"New HW Support:
- Support for Embedded DisplayPort and DisplayPort submodes and
driver support on Qualcomm X1E80100 edp driver
- Qualcomm QMP UFS PHY for SM8475, QMP USB phy for QDU1000/QRU1000
and eusb2-repeater for SMB2360
- Samsung HDMI PHY for i.MX8MP, gs101 UFS phy
- Mediatek XFI T-PHY support for mt7988
- Rockchip usbdp combo phy driver
Updates:
- Qualcomm x4 lane EP support for sa8775p, v4 ad v6 support for
X1E80100, SM8650 tables for UFS Gear 4 & 5 and correct voltage
swing tables
- Freescale imx8m-pci pcie link-up updates
- Rockchip rx-common-refclk-mode support
- More platform remove callback returning void conversions"
* tag 'phy-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (43 commits)
dt-bindings: phy: qcom,usb-snps-femto-v2: use correct fallback for sc8180x
dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: fix msm899[68] power-domains
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: fix x1e80100-gen3x2 schema
phy: qcpm-qmp-usb: Add support for QDU1000/QRU1000
dt-bindings: phy: qcom,qmp-usb: Add QDU1000 USB3 PHY
dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for QDU1000
phy: qcom-qmp-pcie: add x4 lane EP support for sa8775p
phy: samsung-ufs: ufs: exit on first reported error
phy: samsung-ufs: ufs: remove superfluous mfd/syscon.h header
phy: rockchip: fix CONFIG_TYPEC dependency
phy: rockchip: usbdp: fix uninitialized variable
phy: rockchip-snps-pcie3: add support for rockchip,rx-common-refclk-mode
dt-bindings: phy: rockchip,pcie3-phy: add rockchip,rx-common-refclk-mode
phy: rockchip: add usbdp combo phy driver
dt-bindings: phy: add rockchip usbdp combo phy document
phy: add driver for MediaTek XFI T-PHY
dt-bindings: phy: mediatek,mt7988-xfi-tphy: add new bindings
phy: freescale: fsl-samsung-hdmi: Convert to platform remove callback returning void
phy: qcom: qmp-ufs: update SM8650 tables for Gear 4 & 5
MAINTAINERS: Add phy-gs101-ufs file to Tensor GS101.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New HW support:
- Freescale i.MX8ULP edma support in edma driver
- StarFive JH8100 DMA support in Synopsis axi-dmac driver
Updates:
- Tracing support for freescale edma driver, updates to dpaa2 driver
- Remove unused QCom hidma DT support
- Support for i2c dma in imx-sdma
- Maintainers update for idxd and edma drivers"
* tag 'dmaengine-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (42 commits)
MAINTAINERS: Update role for IDXD driver
dmaengine: fsl-edma: use _Generic to handle difference type
dmaengine: fsl-edma: add trace event support
dmaengine: idxd: Avoid unnecessary destruction of file_ida
dmaengine: xilinx: xdma: fix module autoloading
dt-bindings: dma: fsl-edma: allow 'power-domains' property
dt-bindings: dma: fsl-edma: remove 'clocks' from required
dmaengine: fsl-dpaa2-qdma: Fix kernel-doc check warning
dmaengine: imx-sdma: Add i2c dma support
dmaengine: imx-sdma: utilize compiler to calculate ADDRS_ARRAY_SIZE_V<n>
dt-bindings: fsl-imx-sdma: Add I2C peripheral types ID
dt-bindings: fsl-dma: fsl-edma: clean up unused "fsl,imx8qm-adma" compatible string
dmaengine: fsl-edma: clean up unused "fsl,imx8qm-adma" compatible string
dt-bindings: dma: Drop unused QCom hidma binding
dmaengine: qcom: Drop hidma DT support
dmaengine: pl08x: Use kcalloc() instead of kzalloc()
dmaengine: fsl-dpaa2-qdma: Update DPDMAI interfaces to version 3
dmaengine: fsl-edma: fix miss mutex unlock at an error return path
dmaengine: pch_dma: remove unused function chan2parent
dmaengine: fsl-dpaa2-qdma: Add dpdmai_cmd_open
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- redo the omap driver from legacy to mailbox api
- enable bufferless IPI for zynqmp
- add mhu-v3 driver
- convert from tasklet to BH workqueue
- add qcom MSM8974 APCS compatible IDs
* tag 'mailbox-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: (24 commits)
dt-bindings: mailbox: qcom-ipcc: Document the SDX75 IPCC
dt-bindings: mailbox: qcom: Add MSM8974 APCS compatible
mailbox: Convert from tasklet to BH workqueue
mailbox: mtk-cmdq: Fix pm_runtime_get_sync() warning in mbox shutdown
mailbox: mtk-cmdq-mailbox: fix module autoloading
mailbox: zynqmp: handle SGI for shared IPI
mailbox: arm_mhuv3: Add driver
dt-bindings: mailbox: arm,mhuv3: Add bindings
mailbox: omap: Remove kernel FIFO message queuing
mailbox: omap: Reverse FIFO busy check logic
mailbox: omap: Remove mbox_chan_to_omap_mbox()
mailbox: omap: Use mbox_controller channel list directly
mailbox: omap: Use function local struct mbox_controller
mailbox: omap: Merge mailbox child node setup loops
mailbox: omap: Use devm_pm_runtime_enable() helper
mailbox: omap: Remove device class
mailbox: omap: Remove unneeded header omap-mailbox.h
mailbox: omap: Move fifo size check to point of use
mailbox: omap: Move omap_mbox_irq_t into driver
mailbox: omap: Remove unused omap_mbox_request_channel() function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"This makes the remoteproc core rproc_class const.
DeviceTree bindings for a few different Qualcomm remoteprocs are
updated to remove a range of validation warnings/errors. The Qualcomm
SMD binding marks qcom,ipc deprecated, in favor or the mailbox
interface.
The TI K3 R5 remoteproc driver is updated to ensure that cores are
powered up in the appropriate order. The driver also see a couple of
fixes related to cleanups in error paths during probe.
The Mediatek remoteproc driver is extended to support the MT8188 SCP
core 1. Support for varying DRAM and IPI shared buffer sizes are
introduced. This together with a couple of bug fixes and improvements
to the driver.
Support for the AMD-Xilinx Versal and Versal-NET platforms are added.
Coredump support and support for parsing TCM information from
DeviceTree is added to the Xilinx R5F remoteproc driver"
* tag 'rproc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (22 commits)
dt-bindings: remoteproc: qcom,sdm845-adsp-pil: Fix qcom,halt-regs definition
dt-bindings: remoteproc: qcom,sc7280-wpss-pil: Fix qcom,halt-regs definition
dt-bindings: remoteproc: qcom,qcs404-cdsp-pil: Fix qcom,halt-regs definition
dt-bindings: remoteproc: qcom,msm8996-mss-pil: allow glink-edge on msm8996
dt-bindings: remoteproc: qcom,smd-edge: Mark qcom,ipc as deprecated
remoteproc: k3-r5: Jump to error handling labels in start/stop errors
remoteproc: mediatek: Fix error code in scp_rproc_init()
remoteproc: k3-r5: Do not allow core1 to power up before core0 via sysfs
remoteproc: k3-r5: Wait for core0 power-up before powering up core1
remoteproc: mediatek: Add IMGSYS IPI command
remoteproc: mediatek: Support setting DRAM and IPI shared buffer sizes
remoteproc: mediatek: Support MT8188 SCP core 1
dt-bindings: remoteproc: mediatek: Support MT8188 dual-core SCP
drivers: remoteproc: xlnx: Fix uninitialized tcm mode
drivers: remoteproc: xlnx: Fix uninitialized variable use
drivers: remoteproc: xlnx: Add Versal and Versal-NET support
remoteproc: zynqmp: parse TCM from device tree
dt-bindings: remoteproc: Add Tightly Coupled Memory (TCM) bindings
remoteproc: zynqmp: fix lockstep mode memory region
remoteproc: zynqmp: Add coredump support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Skip E820 checks for MCFG ECAM regions for new (2016+) machines,
since there's no requirement to describe them in E820 and some
platforms require ECAM to work (Bjorn Helgaas)
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien
Le Moal)
- Remove last user and pci_enable_device_io() (Heiner Kallweit)
- Wait for Link Training==0 to avoid possible race (Ilpo Järvinen)
- Skip waiting for devices that have been disconnected while
suspended (Ilpo Järvinen)
- Clear Secondary Status errors after enumeration since Master Aborts
and Unsupported Request errors are an expected part of enumeration
(Vidya Sagar)
MSI:
- Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas)
Error handling:
- Mask Genesys GL975x SD host controller Replay Timer Timeout
correctable errors caused by a hardware defect; the errors cause
interrupts that prevent system suspend (Kai-Heng Feng)
- Fix EDR-related _DSM support, which previously evaluated revision 5
but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan)
ASPM:
- Simplify link state definitions and mask calculation (Ilpo
Järvinen)
Power management:
- Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS
apparently doesn't know how to put them back in D0 (Mario
Limonciello)
CXL:
- Support resetting CXL devices; special handling required because
CXL Ports mask Secondary Bus Reset by default (Dave Jiang)
DOE:
- Support DOE Discovery Version 2 (Alexey Kardashevskiy)
Endpoint framework:
- Set endpoint BAR to be 64-bit if the driver says that's all the
device supports, in addition to doing so if the size is >2GB
(Niklas Cassel)
- Simplify endpoint BAR allocation and setting interfaces (Niklas
Cassel)
Cadence PCIe controller driver:
- Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof
Kozlowski)
Cadence PCIe endpoint driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
Freescale Layerscape PCIe controller driver:
- Convert DT binding to YAML (Frank Li)
MediaTek MT7621 PCIe controller driver:
- Add DT binding missing 'reg' property for child Root Ports
(Krzysztof Kozlowski)
- Fix theoretical string truncation in PHY name (Sergio Paracuellos)
NVIDIA Tegra194 PCIe controller driver:
- Return success for endpoint probe instead of falling through to the
failure path (Vidya Sagar)
Renesas R-Car PCIe controller driver:
- Add DT binding missing IOMMU properties (Geert Uytterhoeven)
- Add DT binding R-Car V4H compatible for host and endpoint mode
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
- Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski)
- Set the Subsystem Vendor ID, which was previously zero because it
was masked incorrectly (Rick Wertenbroek)
Synopsys DesignWare PCIe controller driver:
- Restructure DBI register access to accommodate devices where this
requires Refclk to be active (Manivannan Sadhasivam)
- Remove the deinit() callback, which was only need by the
pcie-rcar-gen4, and do it directly in that driver (Manivannan
Sadhasivam)
- Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean
up things like eDMA (Manivannan Sadhasivam)
- Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel
to dw_pcie_ep_init() (Manivannan Sadhasivam)
- Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
reflect the actual functionality (Manivannan Sadhasivam)
- Call dw_pcie_ep_init_registers() directly from all the glue
drivers, not just those that require active Refclk from the host
(Manivannan Sadhasivam)
- Remove the "core_init_notifier" flag, which was an obscure way for
glue drivers to indicate that they depend on Refclk from the host
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli)
- Add DT binding J722S SoC support (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Add DT binding missing num-viewport, phys and phy-name properties
(Jan Kiszka)
Miscellaneous:
- Constify and annotate with __ro_after_init (Heiner Kallweit)
- Convert DT bindings to YAML (Krzysztof Kozlowski)
- Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming
Zhou)"
* tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pc |
