| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
ISO data PDUs carry a packet-boundary flag indicating START, CONT, END
or SINGLE. The ISO_CONT branch of iso_recv() guards against a missing
ISO_START by checking conn->rx_len before touching conn->rx_skb, but
ISO_END does not.
If a peer sends an ISO_END as the first packet on a fresh ISO
connection, conn->rx_skb is still NULL and conn->rx_len is zero, so
skb_put(conn->rx_skb, ...) dereferences NULL and oopses. For BIS,
where receivers sync to a broadcaster without pairing, any broadcaster
on the air can trigger this.
Mirror the ISO_CONT check at the top of ISO_END so a stray end fragment
is logged and dropped instead of crashing the host.
Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
btintel_pcie_get_mac_access() and btintel_pcie_release_mac_access()
were programming STOP_MAC_ACCESS_DIS and XTAL_CLK_REQ in addition to
the MAC_ACCESS_REQ handshake. These bits are not part of the host
MAC-access handshake on the supported parts; the driver was
programming them incorrectly. Drop the writes so the register update
contains only the bits the controller actually consumes.
Fixes: b9465e6670a2 ("Bluetooth: btintel_pcie: Read hardware exception data")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
HCI_EVT_LE_ALL_REMOTE_FEATURES_COMPLETE
This fixes not setting the bit for HCI_EVT_LE_ALL_REMOTE_FEATURES_COMPLETE
when extended features bit is set otherwise the controller may not
generate HCI_EVT_LE_ALL_REMOTE_FEATURES_COMPLETE causing
hci_le_read_all_remote_features_sync to timeout waiting for it.
Also remove dead code.
Fixes: a106e50be74b ("Bluetooth: HCI: Add support for LL Extended Feature Set")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
bnep_add_connection() needs to keep holding the bnep_session_sem while
reading dev->name (just like bnep_get_connlist() does); otherwise the
bnep_session() thread can concurrently free the net_device, which can for
example be triggered by a concurrent bnep_del_connection().
(This UAF is fairly uninteresting from a security perspective;
calling bnep_add_connection() requires passing a capable(CAP_NET_ADMIN)
check. It also requires completely tearing down a netdev during a fairly
tight race window.)
Cc: stable@vger.kernel.org
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
hist_field_name() returns "" everywhere except the fully-qualified
VAR_REF/EXPR case, where snprintf() truncation returns NULL early
and bypasses the bottom NULL->"" guard. Callers don't expect NULL:
strcat(expr, hist_field_name(field, 0)) at trace_events_hist.c:1758
and the strcmp() in the sort-key match loop at :4804 both deref it.
system and event_name are bounded by MAX_EVENT_NAME_LEN, but the
field name on a VAR_REF is kstrdup'd from a histogram variable
name parsed out of the trigger string and has no length cap, so
a long enough var name in a fully qualified reference can reach
the truncation path.
Keep the length check but leave field_name as "" on overflow.
Link: https://patch.msgid.link/20260508195747.25492-1-devnexen@gmail.com
Fixes: 5ec1d1e97de1 ("tracing: Rebuild full_name on each hist_field_name() call")
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Given how rbd_lock_add_request() and rbd_img_exclusive_lock() are
written, lock_dwork may be (re)queued more than it's actually needed:
for example in case a new I/O request comes in while we are in the
middle of rbd_acquire_lock() on behalf of another I/O request. This is
expected and with rbd_release_lock() preemptively canceling lock_dwork
is benign under normal operation.
A more problematic example is maybe_kick_acquire():
if (have_requests || delayed_work_pending(&rbd_dev->lock_dwork)) {
dout("%s rbd_dev %p kicking lock_dwork\n", __func__, rbd_dev);
mod_delayed_work(rbd_dev->task_wq, &rbd_dev->lock_dwork, 0);
}
It's not unrealistic for lock_dwork to get canceled right after
delayed_work_pending() returns true and for mod_delayed_work() to
requeue it right there anyway. This is a classic TOCTOU race.
When it comes to unmapping the image, there is an implicit assumption
of no self-initiated exclusive lock activity past the point of return
from rbd_dev_image_unlock() which unlocks the lock if it happens to be
held. This unlock is assumed to be final and lock_dwork (as well as
all other exclusive lock tasks, really) isn't expected to get queued
again. However, lock_dwork is canceled only in cancel_tasks_sync()
(i.e. later in the unmap sequence) and on top of that the cancellation
can get in effect nullified by maybe_kick_acquire(). This may result
in rbd_acquire_lock() executing after rbd_dev_device_release() and
rbd_dev_image_release() run and free and/or reset a bunch of things.
One of the possible failure modes then is a violated
rbd_assert(rbd_image_format_valid(rbd_dev->image_format));
in rbd_dev_header_info() which is called via rbd_dev_refresh() from
rbd_post_acquire_action().
Redo exclusive lock task draining to provide saner semantics and try
to meet the assumptions around rbd_dev_image_unlock().
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux into pm-cpufreq-fixes
Merge amd-pstate fixes for 7.1 (05/14/2026) from Mario Limonciello:
"A number of fixes to the dynamic epp feature which was new
to kernel 7.1, including making it opt in only."
* tag 'amd-pstate-v7.1-2026-05-14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate: Drop Kconfig option for dynamic EPP
cpufreq/amd-pstate-ut: Drop policy reference before driver switch
cpufreq/amd-pstate: Use "epp_default_dc" as default when dynamic_epp is disabled
cpufreq/amd-pstate: Reorder notifier unregistration and floor perf reset
cpufreq/amd-pstate: Allow writes to dynamic_epp when state isn't modified
cpufreq/amd-pstate: Return -ENOMEM on failure to allocate profile_name
cpufreq/amd-pstate: Grab "amd_pstate_driver_lock" when toggling dynamic_epp
|
|
Commit 36df6e3dbd7e ("cgroup: make css_rstat_updated nmi safe") used
this_cpu_cmpxchg() for the lockless insertion, and therefore required
both ARCH_HAVE_NMI_SAFE_CMPXCHG and ARCH_HAS_NMI_SAFE_THIS_CPU_OPS in
the NMI guard: on archs without the latter, this_cpu_cmpxchg() falls
back to "local_irq_save() + plain cmpxchg", and local_irq_save()
cannot mask NMIs.
Commit 3309b63a2281 ("cgroup: rstat: use LOCK CMPXCHG in
css_rstat_updated") later replaced this_cpu_cmpxchg() with plain
try_cmpxchg() to fix cross-CPU lockless-list corruption, but left the
NMI guard untouched. After that switch, css_rstat_updated() no longer
performs any this_cpu_*() RMW operations and only relies on the arch
having NMI-safe cmpxchg, so ARCH_HAS_NMI_SAFE_THIS_CPU_OPS is no
longer required in the guard.
Relax the guard accordingly so that archs which have HAVE_NMI and
ARCH_HAVE_NMI_SAFE_CMPXCHG but not ARCH_HAS_NMI_SAFE_THIS_CPU_OPS
(e.g. sparc, powerpc on PPC64/BOOK3S) can benefit from the existing
CONFIG_MEMCG_NMI_SAFETY_REQUIRES_ATOMIC path. Without this, the css
is never queued in NMI on those archs, and the atomics staged by
account_{slab,kmem}_nmi_safe() are not drained by flush_nmi_stats().
Fixes: 3309b63a2281 ("cgroup: rstat: use LOCK CMPXCHG in css_rstat_updated")
Signed-off-by: Cunlong Li <shenxiaogll@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Fix a kernel crash related to unaligned zstd extents
- Fix metabuf reference leak in shared xattr initialization
* tag 'erofs-for-7.1-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix metabuf leak in inode xattr initialization
erofs: fix managed cache race for unaligned extents
|
|
A previous commit deferred this to the task_work part of it, so it could
be protected by ->uring_lock. But that's actually not necessary here,
and in fact the head clearing is not enough to make that safe. For those
two reasons, just re-instate the local splicing.
Fixes: 49ae66eb8c27 ("io_uring: defer linked-timeout chain splice out of hrtimer context")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU fixes from Boqun Feng:
"Fix a regression introduced by commit 61bbcfb50514 ("srcu: Push
srcu_node allocation to GP when non-preemptible").
SRCU may queue works on CPUs that are "possible" but never have been
online. In such a case, the work callbacks may not be executed until
the corresponding CPU gets online, and as the callbacks accumulates,
workqueue lockups will fire.
Fix this by avoiding queuing works on CPUs that have never been
online"
* tag 'rcu-fixes.v7.1-20260519a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux:
srcu: Don't queue workqueue handlers to never-online CPUs
|
|
When sysfs_update_group() is called for a named group and create_files()
fails (e.g. -ENOMEM), internal_create_group() calls kernfs_remove(kn) on
the group directory. In the update path, kn was obtained via
kernfs_find_and_get() and refers to a directory that already existed
before this call. Removing it silently destroys a sysfs group that the
caller did not create.
Only remove the directory if we created it ourselves. On update failure
the directory remains as it is left empty by remove_files() inside
create_files(), but can be repopulated by a retry.
Cc: Rajat Jain <rajatja@google.com>
Fixes: c855cf2759d2 ("sysfs: Fix internal_create_group() for named group updates")
Cc: stable <stable@kernel.org>
Assisted-by: gkh_clanker_t1000
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/2026052003-uniquely-hastily-c093@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
virtio_gpu_cursor_plane_update() and virtio_gpu_resource_flush() lock
the framebuffer BO's dma_resv via virtio_gpu_array_lock_resv() and
ignore its return value. The function can fail with -EINTR from
dma_resv_lock_interruptible() (signal during lock wait) or with
-ENOMEM from dma_resv_reserve_fences() (fence slot allocation),
leaving the resv lock not held. The queue path then walks the object
array and calls dma_resv_add_fence(), which requires the lock held;
with lockdep enabled this trips dma_resv_assert_held():
WARNING: drivers/dma-buf/dma-resv.c:296 at dma_resv_add_fence+0x71e/0x840
Call Trace:
virtio_gpu_array_add_fence
virtio_gpu_queue_ctrl_sgs
virtio_gpu_queue_fenced_ctrl_buffer
virtio_gpu_cursor_plane_update
drm_atomic_helper_commit_planes
drm_atomic_helper_commit_tail
commit_tail
drm_atomic_helper_commit
drm_atomic_commit
drm_atomic_helper_update_plane
__setplane_atomic
drm_mode_cursor_universal
drm_mode_cursor_common
drm_mode_cursor_ioctl
drm_ioctl
__x64_sys_ioctl
Beyond the WARN, mutating the dma_resv fence list without the lock
races with concurrent readers/writers and can corrupt the list.
Both call sites run inside the .atomic_update plane callback, which
DRM atomic helpers do not allow to fail (by the time it runs, the
commit has been signed off to userspace and there is no clean
rollback path). Moving the lock acquisition to .prepare_fb was
rejected because the broader lock scope deadlocks against other BO
locking paths in the same atomic commit.
Introduce virtio_gpu_lock_one_resv_uninterruptible() that uses
dma_resv_lock() instead of dma_resv_lock_interruptible(). This
eliminates the -EINTR failure mode -- the realistic syzbot trigger
-- without extending the lock hold across the commit. The helper
locks a single BO and rejects nents > 1 with -EINVAL; both fix
sites lock exactly one BO.
Use it from virtio_gpu_cursor_plane_update() and
virtio_gpu_resource_flush(); check the return value to handle the
remaining -ENOMEM case from dma_resv_reserve_fences() by freeing
the objs and skipping the plane update for that frame. The
framebuffer BOs touched here are not shared with other contexts
and lock contention is expected to be brief, so the loss of
signal-interruptibility is acceptable.
Other callers of virtio_gpu_array_lock_resv() (the ioctl paths)
continue to use the interruptible variant.
The bug was reported by syzbot, triggered via fault injection
(fail_nth) on the DRM_IOCTL_MODE_CURSOR path, which forces the
-ENOMEM branch in dma_resv_reserve_fences().
Reported-by: syzbot+72bd3dd3a5d5f39a0271@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=72bd3dd3a5d5f39a0271
Fixes: 5cfd31c5b3a3 ("drm/virtio: fix virtio_gpu_cursor_plane_update().")
Cc: stable@vger.kernel.org
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patch.msgid.link/20260519082247.34470-1-kartikey406@gmail.com
|
|
Add the missing sanity check on the size of interrupt-in transfers to
avoid parsing stale or uninitialised slab data (and leaking it to user
space).
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The driver overrides the maximum transfer size for a specific device
which only accepts 16 byte packets for its 32 byte bulk-out endpoint.
Make sure to never increase the maximum transfer size to prevent slab
corruption should a malicious device report a smaller endpoint max
packet size than expected.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Add the missing sanity check on the size of usa49wg indat transfers to
avoid parsing stale or uninitialised slab data.
Fixes: 0ca1268e109a ("USB Serial Keyspan: add support for USA-49WG & USA-28XG")
Cc: stable@vger.kernel.org # 2.6.23
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Add the missing bulk-out buffer size sanity checks to avoid
out-of-bounds memory accesses or slab corruption should a malicious
device report smaller buffers than expected.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The Belkin interrupt callback treats interrupt data as a four-byte
status report and reads LSR/MSR fields at offsets 2 and 3. The
interrupt-in buffer length is derived from endpoint wMaxPacketSize, and
short interrupt transfers may complete successfully with a smaller
actual_length.
Check the completed interrupt packet length before parsing status
fields so short interrupt endpoints and short successful packets are
ignored instead of causing out-of-bounds or stale status-byte reads.
KASAN report as below:
BUG: KASAN: slab-out-of-bounds in belkin_sa_read_int_callback()
Read of size 1
Call trace:
belkin_sa_read_int_callback() (drivers/usb/serial/belkin_sa.c:202)
__usb_hcd_giveback_urb() (drivers/usb/core/hcd.c:1630)
dummy_timer() (?:?)
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Assisted-by: Codex:gpt-5.5
Signed-off-by: Zhang Cen <rollkingzzc@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
seq_ump_process_event() borrows client->out_rfile.output without
synchronizing with the first-open and last-close transition in
seq_ump_client_open() and seq_ump_client_close().
The last output unuse can therefore drop opened[STR_OUT] to zero and
release the rawmidi file while an in-flight event_input callback is still
inside snd_rawmidi_kernel_write(). That leaves the rawmidi substream
runtime exposed to teardown before the write path has taken its own
buffer reference.
Add a per-client rwlock for the event_input-visible output file. Publish
a newly opened output file under the write side, and hold the read side
from the output lookup through snd_rawmidi_kernel_write(). The last
output close copies and clears the visible output file under the write
side, then drops the lock and releases the saved rawmidi file. Use
IRQ-safe rwlock guards because event_input can also be reached from
atomic sequencer delivery.
The buggy scenario involves two paths, with each column showing the
order within that path:
path A label: event_input path path B label: last unuse path
1. seq_ump_process_event() reads 1. seq_ump_client_close()
client->out_rfile.output. drops opened[STR_OUT] to zero.
2. snd_rawmidi_kernel_write1() 2. snd_rawmidi_kernel_release()
has not yet pinned runtime. closes the output file.
3. The writer continues using 3. close_substream() frees
the borrowed substream. substream->runtime.
This keeps the output substream and runtime alive for the full
event_input write while keeping rawmidi release outside the rwlock.
KASAN reproduced this as a slab-use-after-free in
snd_rawmidi_kernel_write1(), with allocation through
seq_ump_use()/snd_seq_port_connect() and free through
seq_ump_unuse()/snd_seq_port_disconnect().
Suggested-by: Takashi Iwai <tiwai@suse.de>
Validation reproduced this kernel report:
KASAN slab-use-after-free in snd_rawmidi_kernel_write1+0x9d/0x400
RIP: 0033:0x7f5528af837f
Read of size 8
Call trace:
dump_stack_lvl+0x73/0xb0 (?:?)
print_report+0xd1/0x650 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x1a7/0x340 (?:?)
kasan_complete_mode_report_info+0x64/0x200 (?:?)
kasan_report+0xf7/0x130 (?:?)
snd_rawmidi_kernel_write1+0x9d/0x400 (?:?)
__asan_load8+0x82/0xb0 (?:?)
update_stack_state+0x1ef/0x2d0 (?:?)
snd_rawmidi_kernel_write+0x1a/0x20 (?:?)
seq_ump_process_event+0xd4/0x120 (sound/core/seq/seq_ump_client.c:82)
__snd_seq_deliver_single_event+0x8a/0xe0 (?:?)
snd_seq_deliver_from_ump+0x2b2/0xd60 (?:?)
lock_acquire+0x14e/0x2e0 (?:?)
find_held_lock+0x31/0x90 (?:?)
snd_seq_port_use_ptr+0xa6/0xe0 (?:?)
__kasan_check_write+0x18/0x20 (?:?)
do_raw_read_unlock+0x32/0xa0 (?:?)
_raw_read_unlock+0x26/0x50 (?:?)
snd_seq_deliver_single_event+0x45c/0x4b0 (?:?)
snd_seq_deliver_event+0x10d/0x1b0 (?:?)
snd_seq_client_enqueue_event+0x192/0x240 (?:?)
snd_seq_write+0x2cd/0x450 (?:?)
apparmor_file_permission+0x20/0x30 (?:?)
security_file_permission+0x51/0x60 (?:?)
vfs_write+0x1ce/0x850 (?:?)
__fget_files+0x12b/0x220 (?:?)
lock_release+0xc8/0x2a0 (?:?)
__rcu_read_unlock+0x74/0x2d0 (?:?)
__fget_files+0x135/0x220 (?:?)
ksys_write+0x15a/0x180 (?:?)
rcu_is_watching+0x24/0x60 (?:?)
__x64_sys_write+0x46/0x60 (?:?)
x64_sys_call+0x7d/0x20d0 (?:?)
do_syscall_64+0xc1/0x360 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?)
Fixes: 81fd444aa371 ("ALSA: seq: Bind UMP device")
Signed-off-by: Zhang Cen <rollkingzzc@gmail.com>
Link: https://patch.msgid.link/20260520103249.3048345-1-rollkingzzc@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 wireless-hotkey driver.
Fixes: 8507277ef132 ("platform/x86: wireless-hotkey: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/3899916.MHq7AAxBmi@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 toshiba_haps driver.
Fixes: 3a96c7915d93 ("platform/x86: toshiba_haps: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/2285136.Mh6RI2rZIc@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 toshiba_bluetooth driver.
Fixes: 553b2ac59fbb ("platform/x86: toshiba_bluetooth: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/2715450.Lt9SDvczpP@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 toshiba_acpi driver.
Fixes: 246d6cefe525 ("platform/x86: toshiba_acpi: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/1973170.CQOukoFCf9@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 system76 driver.
Fixes: 80b8f68b94ab ("platform/x86: system76: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/2072699.usQuhbGJ8B@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add requisite ACPI_COMPANION() checks against NULL to the
platform/x86 sony-laptop driver.
Fixes: 138db7ee58c0 ("platform/x86: sony-laptop: Convert PIC driver to a platform one")
Fixes: 14004dd31caa ("platform/x86: sony-laptop: Convert NC driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/1871155.VLH7GnMWUR@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 panasonic-laptop driver.
Fixes: de6837243af0 ("platform/x86: panasonic-laptop: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/3353471.5fSG56mABF@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 lg-laptop driver.
Fixes: 2d9cb20610f7 ("platform/x86: lg-laptop: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/3706551.iIbC2pHGDl@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_HANDLE() check against NULL to the
platform/x86 intel/smartconnect driver.
Fixes: 8a44bd3ffdb2 ("platform/x86: intel/smartconnect: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/7956676.EvYhyI6sBW@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 intel/rst driver.
Fixes: 163a68a31f74 ("platform/x86: intel/rst: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/2051525.PYKUYFuaPT@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add requisite ACPI_COMPANION() checks against NULL to the
platform/x86 fujitsu-tablet driver.
Fixes: bd13b265d386 ("platform/x86: fujitsu-tablet: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/10861611.nUPlyArG6x@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add requisite ACPI_COMPANION() checks against NULL to the
platform/x86 fujitsu-laptop driver.
Fixes: 6da22b031a3c ("platform/x86: fujitsu: Convert laptop driver to a platform one")
Fixes: d5c9212ccfaa ("platform/x86: fujitsu: Convert backlight driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Link: https://patch.msgid.link/3430329.44csPzL39Z@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 eeepc-laptop driver.
Fixes: 079b59fd2d79 ("platform/x86: eeepc-laptop: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/3056852.e9J7NaK4W3@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 dell-rbtn driver.
Fixes: 19ebacfb442b ("platform/x86: dell/dell-rbtn: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/2276487.irdbgypaU6@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 asus-laptop driver.
Fixes: ba19eb10170b ("platform/x86: asus-laptop: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/5083741.GXAFRqVoOG@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 acer-wireless driver.
Fixes: f7e648027d7e ("platform/x86: acer-wireless: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/4746824.LvFx2qVVIh@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
cfg80211_wext_siwfreq() constructs a channel definition for monitor
mode but passes it to cfg80211_set_monitor_channel() without first
validating it with cfg80211_chandef_valid(). This causes a WARN_ON
in cfg80211_chandef_dfs_required() when it receives an invalid chandef.
Add the missing cfg80211_chandef_valid() check before calling
cfg80211_set_monitor_channel() to return -EINVAL early on invalid
channel definitions, consistent with how other callers handle this.
Reported-by: syzbot+02a1a03b8622d3c7d1c9@syzkaller.appspotmail.com
Signed-off-by: Kartik Nair <contact.kartikn@gmail.com>
Link: https://patch.msgid.link/20260510202437.7857-1-contact.kartikn@gmail.com
[clarify subject]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git update for v7.1-rc5
ath10k:
- avoid sending any commands to firmware when it is wedged
ath11k:
- fix WMI buffer leaks on error conditions
- fix UAF in RX MSDU coalesce path
- allow peer ID 0 on RX path (legal for mobile devices)
- reinitialize shared SRNG pointers on restart
ath12k:
- fix 20 MHz-only parsing of EHT-MCS map
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Miri Korenblit says:
====================
wifi: iwlwifi: fixes - 2026-05-16
Contains:
wifi: iwlwifi: mld: fix TSO segmentation explosion when AMSDU is disabled
wifi: iwlwifi: mld: stop TX during firmware restart
wifi: iwlwifi: mld: don't WARN on WoWLAN suspend w/o BSS vif
wifi: iwlwifi: mvm: fix driver-set TX rates on old devices
wifi: iwlwifi: mld: disconnect only after 6 beacons without Rx
wifi: iwlwifi: mld: don't dereference a pointer before NULL checking it
wifi: iwlwifi: use correct function to read STEP_URM register
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
ieee80211_tid_to_link_map_size_ok() validates negotiated TTLM elements
against the number of link-map entries indicated by link_map_presence.
ieee80211_parse_neg_ttlm() must consume the same layout.
The parser advanced its cursor for every TID, including TIDs whose
presence bit is clear and therefore have no map bytes in the element.
A sparse map can then make a later present TID read past the validated
element.
The bad bytes land in neg_ttlm->{up,down}link[tid] but are gated by
valid_links before being applied to driver state, so a peer cannot
turn the read into a policy change. Under KUnit + KASAN with an
exact-sized element allocation the OOB read is reported as a
slab-out-of-bounds; whether the same trigger fires under the
production RX path depends on surrounding allocator state.
Advance the cursor only when the current TID has a map present.
Fixes: 8f500fbc6c65 ("wifi: mac80211: process and save negotiated TID to Link mapping request")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260515151719.1317659-2-michael.bommarito@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
wilc_wlan_firmware_download() allocates dma_buffer with kmalloc() at
the top of the function and uses a 'fail:' label to free it via
kfree(dma_buffer) on error.
All later error paths correctly use 'goto fail' to route through this
cleanup. However, the early failure path after the first acquire_bus()
call uses a bare 'return ret;', which leaks dma_buffer whenever the bus
acquire fails.
Replace the early return with goto fail so the existing cleanup path
runs.
Found via a custom Coccinelle semantic patch hunting for kmalloc'd
locals leaked on early-return error paths in driver firmware-download
code.
Fixes: 1241c5650ff7 ("wifi: wilc1000: Fill in missing error handling")
Signed-off-by: Shitalkumar Gandhi <shitalkumar.gandhi@cambiumnetworks.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260511042732.998311-1-shitalkumar.gandhi@cambiumnetworks.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
ieee80211_invoke_fast_rx() reads RX status through
IEEE80211_SKB_RXCB(skb), which aliases the same skb->cb storage
that ieee80211_rx_mesh_data() reuses as IEEE80211_TX_INFO. In the
unicast forward path, mesh_data does:
info = IEEE80211_SKB_CB(fwd_skb);
memset(info, 0, sizeof(*info));
on the same skb the caller still names via rx->skb, then either
queues the skb for TX (success) or kfree_skb()'s it (no-route)
before returning RX_QUEUED. The caller's RX_QUEUED arm then
calls sta_stats_encode_rate(status) on memory that is either
zeroed (success path) or freed (no-route path). The latter is
KASAN slab-use-after-free in ieee80211_prepare_and_rx_handle.
Fix by encoding the rate from status before invoking
ieee80211_rx_mesh_data(), so the RX_QUEUED arm consumes a value
captured while status was still backed by valid memory.
Fixes: 3468e1e0c639 ("wifi: mac80211: add mesh fast-rx support")
Cc: stable@vger.kernel.org
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260509043427.60322-2-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When parsing a beacon, mac80211 erroneously inherits any
reconfiguration or EPCS multi-link elements from the outer
elements into the multi-BSSID profile that's requested, if
connected to a non-transmitted BSS, unless that profile
has a non-inheritance element.
This also happens if parsing a multi-BSSID profile that
doesn't have a non-inheritance element.
Fix this by having an empty non-inheritance element so
cfg80211_is_element_inherited() is invoked in these cases
and causes the parser to skip the elements that should
never be inherited.
Fixes: cf36cdef10e2 ("wifi: mac80211: Add support for parsing Reconfiguration Multi Link element")
Fixes: 24711d60f849 ("wifi: mac80211: Support parsing EPCS ML element")
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20260508091032.92184c0a3f08.I3c43b0b63d2cef8a4ddddaef1c2faaeb1de711ad@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If either reconf or EPCS multi-link element (MLE) is contained in
a non-transmitted profile, the defragmentation routine is called
with a pointer to the defragmented copy, but the original elements.
This is incorrect for two reasons:
- if the original defragmentation was needed, it will not find the
correct data
- if the original frame is at a higher address, the parsing will
potentially overrun the heap data (though given the layout of
the buffers, only into the new defragmentation buffer, and then
it has to stop and fail once that's filled with copied data.
Fix it by tracking the container along with the pointer and in
doing so also unify the two almost identical defragmentation
routines.
Fixes: 4d70e9c5488d ("wifi: mac80211: defragment reconfiguration MLE when parsing")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Link: https://patch.msgid.link/20260508091031.8a6c34613178.I4de16ebbce2d27f2f8f98fc49949c7a376c2fe8d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In client mode, the extended capabilities are handled by the kernel
looking at the association frame. When the supplicant installs the keys
it calls sta_apply_parameters and it doesn't include the extended
capabilities since those can't change after association.
As a result, we overrode the max_amsdu_subframes that we set after
association.
Check that the ext_capa coming from the user space is valid before
looking at it. If the ext_capa is NULL, it really means that the
extended capabilities are not changed (as opposed to cleared).
The default value for max_amsdu_subframes is 0, which means there is no
limit. This value is valid and in case the association response frame
does not have extended capabilities, this is the value we should use.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221079
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260513170623.828dbb58c782.Ifd2bfc190c26140e919127adb02ffddd7b551499@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
IEEE80211_MLE_STA_EPCS_CONTROL_LINK_ID is 0x000f, so link_id extracted
from a PRIO_ACCESS ML element PER_STA_PROFILE subelement can be 0..15.
sdata->link[] has IEEE80211_MLD_MAX_NUM_LINKS (15) entries (indices 0..14),
making index 15 out-of-bounds.
A connected WiFi 7 AP can trigger this by sending an EPCS Enable Response
action frame with a PER_STA_PROFILE subelement where link_id = 15. The
unsolicited-notifi |
