| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
'Commit a354f030dbce ("ASoC: qcom: q6asm: handle the responses
after closing")' attempted to ignore DSP responses arriving
after a stream had been closed.
However, those responses were still handled, causing lockups.
Fix this by unconditionally dropping all DSP responses associated with
closed data streams.
Signed-off-by: Cédric Bellegarde <cedric.bellegarde@adishatz.org>
Link: https://patch.msgid.link/20260102215225.609166-1-cedric.bellegarde@adishatz.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The wcd-mbhc-v2 driver has unnecessary empty module_init and
module_exit functions. Remove them. Note that if a module_init function
exists, a module_exit function must also exist; otherwise, the module
cannot be unloaded.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260131020111.46108-1-enelsonmoore@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There are some configurations in which lockdep_assert_rcu_helper() ends up
not being inlined, for some reason. This leads to a link failure because
now the caller tries to pass a nonexistant __ctx_lock_RCU structure:
ld: lib/test_context-analysis.o: in function `test_rcu_assert_variants':
test_context-analysis.c:(.text+0x275c): undefined reference to `RCU'
ld: test_context-analysis.c:(.text+0x276c): undefined reference to `RCU_BH'
ld: test_context-analysis.c:(.text+0x2774): undefined reference to `RCU_SCHED'
I saw this in one out of many 32-bit arm builds using gcc-15.2, but
it probably happens in others as well.
Mark this function as __always_inline to fix the build.
Fixes: fe00f6e84621 ("rcu: Support Clang's context analysis")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://patch.msgid.link/20260202095507.1237440-1-arnd@kernel.org
|
|
The list_for_each_entry_rcu() in filter_chain() uses
rcu_read_lock_trace_held() as the lockdep condition, but the function
holds consumer_rwsem, not the RCU trace lock.
This gives me the following output when running with some locking debug
option enabled:
kernel/events/uprobes.c:1141 RCU-list traversed in non-reader section!!
filter_chain
register_for_each_vma
uprobe_unregister_nosync
__probe_event_disable
Remove the incorrect lockdep condition since the rwsem provides
sufficient protection for the list traversal.
Fixes: cc01bd044e6a ("uprobes: travers uprobe's consumer list locklessly under SRCU protection")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260128-uprobe_rcu-v2-1-994ea6d32730@debian.org
|
|
The comment for dc_l2tlb_miss incorrectly describes it as a "hit".
This contradicts the field name and the actual bit definition.
Fix the comment to correctly describe it as a "miss".
Signed-off-by: Xiang-Bin Shi <eric91102091@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260123075719.160734-1-eric91102091@gmail.com
|
|
A recent change for the range check started triggering a clang warning:
fs/jfs/jfs_dtree.c:2906:31: error: result of comparison of constant 128 with expression of type 's8' (aka 'signed char') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
2906 | if (stbl[i] < 0 || stbl[i] >= DTPAGEMAXSLOT) {
| ~~~~~~~ ^ ~~~~~~~~~~~~~
fs/jfs/jfs_dtree.c:3111:30: error: result of comparison of constant 128 with expression of type 's8' (aka 'signed char') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
3111 | if (stbl[0] < 0 || stbl[0] >= DTPAGEMAXSLOT) {
| ~~~~~~~ ^ ~~~~~~~~~~~~~
Both the old and the new check were useless, but the previous version
apparently did not lead to the warning.
Remove the extraneous range check for simplicity.
Fixes: cafc6679824a ("jfs: replace hardcoded magic number with DTPAGEMAXSLOT constant")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
In the case of an empty wakeup_sources list, wakeup_sources_walk_start()
will return an invalid but non-NULL address. This also affects wrappers
of the aforementioned function, like for_each_wakeup_source().
Update wakeup_sources_walk_start() to return NULL in case of an empty
list.
Fixes: b4941adb24c0 ("PM: wakeup: Add routine to help fetch wakeup source object.")
Signed-off-by: Samuel Wu <wusamuel@google.com>
[ rjw: Subject and changelog edits ]
Link: https://patch.msgid.link/20260124012133.2451708-2-wusamuel@google.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Require the invalidate_lock to be held over calls to
page_cache_ra_unbounded instead of acquiring it in this function.
This prepares for calling page_cache_ra_unbounded from ->readahead for
fsverity read-ahead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20260202060754.270269-3-hch@lst.de
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
The init_enable_count test is flaky. The test forks 1024 children before
attaching the scheduler to verify that existing tasks get ops.init_task()
called. The children were using sleep(1) before exiting.
7900aa699c34 ("sched_ext: Fix cgroup exit ordering by moving sched_ext_free()
to finish_task_switch()") changed when tasks are removed from scx_tasks -
previously when the task_struct was freed, now immediately in
finish_task_switch() when the task dies.
Before the commit, pre-forked children would linger on scx_tasks until freed
regardless of when they exited, so the scheduler would always see them during
iteration. The sleep(1) was unnecessary. After the commit, children are
removed as soon as they die. The sleep(1) masks the problem in most cases but
the test becomes flaky depending on timing.
Fix by synchronizing properly using a pipe. All children block on read() and
the parent signals them to exit by closing the write end after attaching the
scheduler. The children are auto-reaped so there's no need to wait on them.
Reported-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Cc: David Vernet <void@manifault.com>
Cc: Andrea Righi <arighi@nvidia.com>
Cc: Changwoo Min <changwoo@igalia.com>
Cc: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Issuing more reads on errors is not a good idea, especially when the
most common error here is -ENOMEM.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20260202060754.270269-2-hch@lst.de
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into clk-microchip
Pull Microchip clk driver updates from Claudiu Beznea:
- clean up microchip/clk-core.c to:
-- fix a sparse warning related to multiple initializations of
pic32_sclk_ops.determine_rate()
-- correct the return values of roclk_get_parent() and sclk_get_parent()
-- drop an unused include header
- adjust the PolarFire driver Kconfig section as the driver is now used by
non-PolarFire devices
- update the documentation for the Microchip PIC64GX SoC clock controller
* tag 'clk-microchip-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
dt-bindings: clock: mpfs-clkcfg: Add pic64gx compatibility
dt-bindings: clock: mpfs-ccc: Add pic64gx compatibility
clk: microchip: drop POLARFIRE from ARCH_MICROCHIP_POLARFIRE
clk: microchip: core: remove unused include asm/traps.h
clk: microchip: core: correct return value on *_get_parent()
clk: microchip: core: remove duplicate determine_rate on pic32_sclk_ops
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-rockchip
Pull a Rockchip clk driver update from Heiko Stuebner:
Additional check for an error pointer and not only for NULL when a
gatelink is added.
* tag 'v6.20-rockchip-clk-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: Fix error pointer check after rockchip_clk_register_gate_link()
|
|
It is possible to have a task get stuck on waiting on the
NFS_LAYOUT_DRAIN in the following scenario
1. cpu a: waiter test NFS_LAYOUT_DRAIN (1) and plh_outstanding (1)
2. cpu b: atomic_dec_and_test() -> clear bit -> wake up
3. cpu c: sets NFS_LAYOUT_DRAIN again
4. cpu a: calls wait_on_bit() sleeps forever.
To expand on this we have say 2 outstanding pnfs write IO that get
ESTALE which causes both to call pnfs_destroy_layout() and set the
NFS_LAYOUT_DRAIN bit but the 1st one doesn't call the
pnfs_put_layout_hdr() yet (as that would prevent the 2nd ESTALE write
from trying to call pnfs_destroy_layout()). If the 1st ESTALE write
is the one that initially sets the NFS_LAYOUT_DRAIN so that new IO
on this file initiates new LAYOUTGET. Another new write would find
NFS_LAYOUT_DRAIN set and phl_outstanding>0 (step 1) and would
wait_on_bit(). LAYOUTGET completes doing step 2. Now, the 2nd of
ESTALE writes is calling pnfs_destory_layout() and set the
NFS_LAYOUT_DRAIN bit (step 3). Finally, the waiting write wakes up
to check the bit and goes back to sleep.
The problem revolves around the fact that if NFS_LAYOUT_INVALID_STID
was already set, it should not do the work of
pnfs_mark_layout_stateid_invalid(), thus NFS_LAYOUT_DRAIN will not
be set more than once for an invalid layout.
Suggested-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Fixes: 880265c77ac4 ("pNFS: Avoid a live lock condition in pnfs_update_layout()")
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm fix from Paul Moore:
"A small patch to address a regression found in the v6.19-rcX releases
where the /proc/sys/vm/mmap_min_addr tunable disappeared when
CONFIG_SECURITY was not selected.
Long term we plan to work with the MM folks to get the core parts of
this moved over to the MM subsystem, but in the meantime we need to
fix this regression prior to the v6.19 release"
* tag 'lsm-pr-20260202' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: preserve /proc/sys/vm/mmap_min_addr when !CONFIG_SECURITY
|
|
Add testing notice to "Before creating patches" section.
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260123071523.1392729-1-dmantipov@yandex.ru>
|
|
When CONFIG_PM is disabled, the GPIO controlled FANs can't be stopped by
using the sysfs attributes since commit 0d01110e6356 ("hwmon: (gpio-fan)
Add regulator support").
Using either the 'pwm1' or the 'fan1_target' attribute fails the same way:
$ echo 0 > /sys/class/hwmon/hwmon1/pwm1
ash: write error: Function not implemented
$ echo 0 > /sys/class/hwmon/hwmon1/fan1_target
ash: write error: Function not implemented
Both commands were working flawlessly before the mentioned commit.
The issue happens because pm_runtime_put_sync() returns with -ENOSYS
when CONFIG_PM is disabled, and the set_fan_speed() function handles
this as an error.
In order to restore the previous behaviour, change the error check in
the set_fan_speed() function to ignore the -ENOSYS error code.
Cc: stable@vger.kernel.org
Fixes: 0d01110e6356 ("hwmon: (gpio-fan) Add regulator support")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20260202-gpio-fan-stop-fix-v1-1-c7853183d93d@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The set_rpm function is used as a 'store' callback of a device attribute,
and as such it should return with the number of bytes consumed. However
since commit 0d01110e6356 ("hwmon: (gpio-fan) Add regulator support"),
the function returns with zero on success.
Due to this, the function gets called again and again whenever the user
tries to change the FAN speed by writing the desired RPM value into the
'fan1_target' sysfs attribute.
The broken behaviour can be reproduced easily. For example, the following
command never returns unless it gets terminated:
$ echo 500 > /sys/class/hwmon/hwmon1/fan1_target
^C
$
Change the code to return with the same value as the 'count' parameter
on success to indicate that all bytes from the input buffer are consumed.
The function behaved the same way prior to the offending change.
Cc: stable@vger.kernel.org
Fixes: 0d01110e6356 ("hwmon: (gpio-fan) Add regulator support")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20260201-gpio-fan-set_rpm-retval-fix-v1-1-dc39bc7693ca@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Allow the rejection of authenticatedAttributes in PKCS#7 (signedAttrs in
CMS) to be waived in the kernel config for ML-DSA when used for module
signing. This reflects the issue that openssl < 4.0 cannot do this and
openssl-4 has not yet been released.
This does not permit RSA, ECDSA or ECRDSA to be so waived (behaviour
unchanged).
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Lukas Wunner <lukas@wunner.de>
cc: Ignat Korchagin <ignat@cloudflare.com>
cc: Jarkko Sakkinen <jarkko@kernel.org>
cc: Stephan Mueller <smueller@chronox.de>
cc: Eric Biggers <ebiggers@kernel.org>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: keyrings@vger.kernel.org
cc: linux-crypto@vger.kernel.org
|
|
Besides the parameters that are passed via command line arguments,
the wrapper's behavior is affected by several environment variables.
Document that. While here, use __doc__ for its description.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <e0ccee75f7e7fb499e0f59d5b84469f4b6a21627.1769500383.git.mchehab+huawei@kernel.org>
|
|
Documentation builds were using "-q" for a long time, but sometimes
it is nice to see the Sphinx progress, without increasing build
verbosity - which would also turn on kernel-doc verbosity.
Instead of doing that, let's parse the sphinx-build already-existing
-v: each time it is used, it increases the verbosity level.
With that, if the default is to use -q, a single -v will disable
quiet mode. Passing more -v will keep increasing its verbosity.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <38b24e97a3cbd2def418359a8e69b1b087a945ad.1769500383.git.mchehab+huawei@kernel.org>
|
|
the "\1" inside a docstring requires proper scaping to not be
considered a hex character and break the build.
Reported-by: Akira Yokosawa <akiyks@gmail.com>
Closes: https://lore.kernel.org/linux-doc/63e99049-cc72-4156-83af-414fdde34312@gmail.com/
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <2fff8ef1d0d64e8b68f15f5c07613f302d773855.1769500383.git.mchehab+huawei@kernel.org>
|
|
Allow ML-DSA module signing to be enabled.
Note that OpenSSL's CMS_*() function suite does not, as of OpenSSL-3.6,
support the use of CMS_NOATTR with ML-DSA, so the prohibition against using
signedAttrs with module signing has to be removed. The selected digest
then applies only to the algorithm used to calculate the digest stored in
the messageDigest attribute. The OpenSSL development branch has patches
applied that fix this[1], but it appears that that will only be available
in OpenSSL-4.
[1] https://github.com/openssl/openssl/pull/28923
sign-file won't set CMS_NOATTR if openssl is earlier than v4, resulting in
the use of signed attributes.
The ML-DSA algorithm takes the raw data to be signed without regard to what
digest algorithm is specified in the CMS message. The CMS specified digest
algorithm is ignored unless signedAttrs are used; in such a case, only
SHA512 is permitted.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jarkko Sakkinen <jarkko@kernel.org>
cc: Eric Biggers <ebiggers@kernel.org>
cc: Lukas Wunner <lukas@wunner.de>
cc: Ignat Korchagin <ignat@cloudflare.com>
cc: Stephan Mueller <smueller@chronox.de>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: keyrings@vger.kernel.org
cc: linux-crypto@vger.kernel.org
|
|
Translate the "Obtain a current source tree" section in
Documentation/translations/ja_JP/process/submitting-patches.rst.
Signed-off-by: Akiyoshi Kurita <weibu@redadmin.org>
Reviewed-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260127130155.16935-1-weibu@redadmin.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git patches for v6.20/v7.0 (#3)
A set of small features and cleanups for the next merge window.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Signed-off-by: Rhys Tumelty <rhys@tumelty.co.uk>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260128220233.179439-1-rhys@tumelty.co.uk>
|
|
"userspace" was misspelled as "userpace".
Signed-off-by: Gabriel Whigham <gabewhigham@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260130042131.51975-1-gabewhigham@gmail.com>
|
|
The entry in proc.rst for 3.14 is missing the closing ">" of the "pid"
field for the ksm_stat file. Add this for both the table of contents and
the actual header for the "ksm_stat" file.
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Böhler <witcher@wiredspace.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260131-ksm_stat-v2-1-a8fea12d604e@wiredspace.de>
|
|
Fixup and refactor downstream port enumeration to prepare for CXL port
protocol error handling. Main motivation is to move endpoint
component register mapping to a port object.
cxl/port: Unify endpoint and switch port lookup
cxl/port: Move endpoint component register management to cxl_port
cxl/port: Map Port RAS registers
cxl/port: Move dport RAS setup to dport add time
cxl/port: Move dport probe operations to a driver event
cxl/port: Move decoder setup before dport creation
cxl/port: Cleanup dport removal with a devres group
cxl/port: Reduce number of @dport variables in cxl_port_add_dport()
cxl/port: Cleanup handling of the nr_dports 0 -> 1 transition
|
|
Reproducer:
1. server: supports SMB1, directories are exported read-only
2. client: mount -t cifs -o vers=1.0 //${server_ip}/export /mnt
3. client: dd if=/dev/zero of=/mnt/file bs=512 count=1000 oflag=direct
4. client: umount /mnt
5. client: sleep 1
6. client: modprobe -r cifs
The error message is as follows:
=============================================================================
BUG cifs_small_rq (Not tainted): Objects remaining on __kmem_cache_shutdown()
-----------------------------------------------------------------------------
Object 0x00000000d34491e6 @offset=896
Object 0x00000000bde9fab3 @offset=4480
Object 0x00000000104a1f70 @offset=6272
Object 0x0000000092a51bb5 @offset=7616
Object 0x000000006714a7db @offset=13440
...
WARNING: mm/slub.c:1251 at __kmem_cache_shutdown+0x379/0x3f0, CPU#7: modprobe/712
...
Call Trace:
<TASK>
kmem_cache_destroy+0x69/0x160
cifs_destroy_request_bufs+0x39/0x40 [cifs]
cleanup_module+0x43/0xfc0 [cifs]
__se_sys_delete_module+0x1d5/0x300
__x64_sys_delete_module+0x1a/0x30
x64_sys_call+0x2299/0x2ff0
do_syscall_64+0x6e/0x270
entry_SYSCALL_64_after_hwframe+0x76/0x7e
...
kmem_cache_destroy cifs_small_rq: Slab cache still has objects when called from cifs_destroy_request_bufs+0x39/0x40 [cifs]
WARNING: mm/slab_common.c:532 at kmem_cache_destroy+0x142/0x160, CPU#7: modprobe/712
Link: https://lore.kernel.org/linux-cifs/9751f02d-d1df-4265-a7d6-b19761b21834@linux.dev/T/#mf14808c144448b715f711ce5f0477a071f08eaf6
Fixes: 6be09580df5c ("cifs: Make smb1's SendReceive() wrap cifs_send_recv()")
Reported-by: Paulo Alcantara <pc@manguebit.org>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Reproducer:
1. server: directories are exported read-only
2. client: mount -t cifs //${server_ip}/export /mnt
3. client: dd if=/dev/zero of=/mnt/file bs=512 count=1000 oflag=direct
4. client: umount /mnt
5. client: sleep 1
6. client: modprobe -r cifs
The error message is as follows:
=============================================================================
BUG cifs_small_rq (Not tainted): Objects remaining on __kmem_cache_shutdown()
-----------------------------------------------------------------------------
Object 0x00000000d47521be @offset=14336
...
WARNING: mm/slub.c:1251 at __kmem_cache_shutdown+0x34e/0x440, CPU#0: modprobe/1577
...
Call Trace:
<TASK>
kmem_cache_destroy+0x94/0x190
cifs_destroy_request_bufs+0x3e/0x50 [cifs]
cleanup_module+0x4e/0x540 [cifs]
__se_sys_delete_module+0x278/0x400
__x64_sys_delete_module+0x5f/0x70
x64_sys_call+0x2299/0x2ff0
do_syscall_64+0x89/0x350
entry_SYSCALL_64_after_hwframe+0x76/0x7e
...
kmem_cache_destroy cifs_small_rq: Slab cache still has objects when called from cifs_destroy_request_bufs+0x3e/0x50 [cifs]
WARNING: mm/slab_common.c:532 at kmem_cache_destroy+0x16b/0x190, CPU#0: modprobe/1577
Link: https://lore.kernel.org/linux-cifs/9751f02d-d1df-4265-a7d6-b19761b21834@linux.dev/T/#mf14808c144448b715f711ce5f0477a071f08eaf6
Fixes: e255612b5ed9 ("cifs: Add fallback for SMB2 CREATE without FILE_READ_ATTRIBUTES")
Reported-by: Paulo Alcantara <pc@manguebit.org>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When nvme_alloc_admin_tag_set() is called during a controller reset,
a previous admin queue may still exist. Release it properly before
allocating a new one to avoid orphaning the old queue.
This fixes a regression introduced by commit 03b3bcd319b3 ("nvme: fix
admin request_queue lifetime").
Cc: Keith Busch <kbusch@kernel.org>
Fixes: 03b3bcd319b3 ("nvme: fix admin request_queue lifetime").
Reported-and-tested-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/linux-block/CAHj4cs9wv3SdPo+N01Fw2SHBYDs9tj2M_e1-GdQOkRy=DsBB1w@mail.gmail.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: New device support, features and cleanup for the 6.20/7.0 cycle.
Slightly messier than normal unfortunately due to some conflicts
and build config bugs related to I3C drivers.
One last minute Kconfig fix right at the top after a linux-next report.
I've simplified the Kconfig and made it match other instances in the kernel
so that should be safe enough despite short soak time in front of build bots.
Merge of an immutable branch from I3C to get some stubs that were missing
and caused build issues with dual I2C / I3C drivers. This also brought in a
drop of some deprecated interfaces so there is also one patch to update a
new driver to not use those.
We are having another go at using cleanup.h magic with the IIO mode claim
functions after backing out last try at this. This time we have wrappers
around the new ACQUIRE() and ACQUIRE_ERR() macros.
Having been burnt once, we will be taking it a bit more slowly this time
wrt to wide adoption of these! Thanks in particular to Kurt for taking
on this core IIO work.
New Device Support
==================
adi,ad18113
- New driver to support the AD18113 amplifier - an interesting device due
to the external bypass paths where we need to describe what gain those
paths have in DT. Longer term it will be interesting to see if this
simplistic description is enough for real deployments.
adi,ad4062
- New driver for the AD4060 and AD4052 SAR ADCs including trigger, event
and GPIO controller support. Follow up patch replaced use of some
deprecated I3C interfaces prior to the I3C immutable branch merge as
that includes dropping them.
adi,ad4134
- New driver for the AD4134 24bit 4 channel simultaneous sampling ADC.
adi,ad7768-1,
- Add support for the ADAQ767-1, ADAQ7768-1 and ADAQ7769-1 ADCs after some
rework to enable the driver to support multiple device types.
adi,ad9467
- Add support for the similar ad9211 ADC to this existing driver.
- Make the selection of 2s comp mode explicit for normal operation and
switch to offset binary when entering calibration mode.
honeywell,abp2
- New driver to support this huge family (100+) of board mount pressure and
temperature sensors.
maxim,max22007
- New drier for this 4 channel DAC.
memsic,mmc5633
- New driver for this I2C/I3C magnetometer. Follow on patches fixed up
issues related to single driver supporting both bus types.
microchip,mcp747feb02
- New driver for the Microchip MCP47F(E/V)B(0/1/2)1,
MCP47F(E/V)B(0/1/2)2, MCP47F(E/V)B(0/1/2)4 and MCP47F(E/V)B(0/1/2)8
buffered voltage output DACs.
nxp,sar-adc
- New driver support ADCs found on s32g2 and s32g3 platforms.
ti,ads1018
- New drier for the ADS1018 and ADS1118 SPI ADCs.
ti,ads131m02
- New driver supporting ADS131M(02/03/04/06/08)24-bit simultaneous sampling
ADCs.
Features
========
iio-core
- New IIO_DEV_ACQUIRE_DIRECT_MODE() / IIO_DEV_ACQUIRE_FAILED() +
equivalents for the much rarer case where the mode needs pinning
whether or not it is in direct mode. These use the ACQUIRE()
/ ACQUIRE_ERR() infrastructure underneath to provide both simple
checks on whether we got the requested mode and to provide scope
based release. Applied in a few initial drivers.
adi,ad9467
- Support calibbias control
adi,adf4377
- Add support to act as a clock provider.
adi,adxl380
- Support low power 1KHz sampling frequency mode. Required rework of
how events and filters were configured, plus applying of constraints
when in this mode.
rf-digital,rfd77402
- Add interrupt support as alternative to polling for completion.
st,lsm6dsx
- Tap event detection (after considerable driver rework)
Cleanup and Minor Fixes
=======================
More minor cleanup such as typos, white space etc not called out except
where they were applied to a lot of drivers.
Various drivers.
- Use of dev_err_probe() to cleanup error handling.
- Introduce local struct device and struct device_node variables to
reduce duplication of getting them from containing structs.
- Ensure uses of iio_trigger_generic_data_rdy_poll() set IRQF_NO_THREAD
as that function calls non threaded child interrupt handlers.
- Replace IRQF_ONESHOT in not thread interrupt handlers with
IRQF_NO_THREAD to ensure they run as intended. Drop one unnecessary case.
iio-sw-device/trigger.
- Constify configs_group_operations structures.
iio-buffer-dma / buffer-dma-engine
- Use lockdep_assert_held() to replace WARN_ON() to check lock is
correctly held.
- Make use of cleanup.h magic to simplify various code paths.
- Make iio_dma_buffer_init() return void rather than always success.
adi,ad7766
- Replace custom interrupt handler with iio_trigger_generic_data_rdy_poll()
adi,ad9832
- Drop legacy platform_data support.
adi,ade9000
- Add a maintainer entry.
adi,adt7316
- Move to EXPORT_GPL_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() so the compiler
can cleanly drop unused pm structures and callbacks.
adi,adxl345
- Relax build constraint vs the driver that is in input so both may be
built as modules and selection made at runtime.
adi,adxl380
- Make sure we don't read tail entries in the hardware fifo if a partial
new scan has been written.
- Move to a single larger regmap_noinc_read() to read the hardware fifo.
aspeed,ast2600
- Add missing interrupts property to DT binding.
bosch,bmi270_i2c
- Add missing MODULE_DEVICE_TABLE() macros so auto probing of modules can
work.
bosch,smi330
- Drop duplicate assignment of IIO_TYPE in smi330_read_avail()
- Use new common field_get() and field_prep() helpers to replace local
version.
honeywell,mprls0025pa
Fixes delayed to merge window as late in cycle and we didn't want to delay
the rest of the series.
- Allow Kconfig selection of specific bus sub-drivers rather than tying that
to the buses themselves being supported.
- Zero spi_transfer structure to avoid chance of unintentionally set fields
effecting transfer.
- Fix a potential timing violation wrt to the chip select to first clock
edge timing.
- As recent driver, take risk inherent in dropping interrupt direction from
driver as that should be set by firmware.
- Fix wrong reported number of data bits for channel.
- Fix a pressure channel calculation bug.
- Rework to allow embedding the tx buffer in the iio_priv() structure rather
than requiring separate allocation.
- Move the buffer clearing to the shared core bringing it into affect for
SPI as well as I2C.
- Stricter checks for status byte.
- Greatly simplify the measurement sequence.
- Add a copyright entry to reflect Petre's continued work on this driver.
intersil,isl29018
- Switch from spritnf to sysfs_emit_at() to make it clear overflow can't
occur.
invensense,icm42600
- Allow sysfs access to temperature when buffered capture in use as it
does not impact other sensor data paths.
invensense,itg3200
- Check unused return value in read_raw() callback.
men,z188
- Drop now duplicated module alias.
rf-digital,rfd77402
- Add DT binding doc and explicit of_device_id table.
- Poll for timeout with times as on datasheet, then replace opencoded
version with read_poll_timeout().
sensiron,scd4x
- Add missing timestamp channel. The code to push it to the buffer was there
but there was no way to turn it on.
vti,sca3000
- Fix resource leak if iio_device_register() fails.
* tag 'iio-for-7.0a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (144 commits)
iio: magn: mmc5633: Fix Kconfig for combination of I3C as module and driver builtin
iio: sca3000: Fix a resource leak in sca3000_probe()
iio: proximity: rfd77402: Add interrupt handling support
iio: proximity: rfd77402: Document device private data structure
iio: proximity: rfd77402: Use devm-managed mutex initialization
iio: proximity: rfd77402: Use kernel helper for result polling
iio: proximity: rfd77402: Align polling timeout with datasheet
iio: cros_ec: Allow enabling/disabling calibration mode
iio: frequency: ad9523: correct kernel-doc bad line warning
iio: buffer: buffer_impl.h: fix kernel-doc warnings
iio: gyro: itg3200: Fix unchecked return value in read_raw
MAINTAINERS: add entry for ADE9000 driver
iio: accel: sca3000: remove unused last_timestamp field
iio: accel: adxl372: remove unused int2_bitmask field
iio: adc: ad7766: Use iio_trigger_generic_data_rdy_poll()
iio: magnetometer: Remove IRQF_ONESHOT
iio: Replace IRQF_ONESHOT with IRQF_NO_THREAD
iio: Use IRQF_NO_THREAD
iio: dac: Add MAX22007 DAC driver support
dt-bindings: iio: dac: Add max22007
...
|
|
The DHCHAP secrets (dhchap_secret and dhchap_ctrl_secret) contain
authentication key material for NVMe-oF. Use kfree_sensitive() instead
of kfree() in nvmf_free_options() to ensure secrets are zeroed before
the memory is freed, preventing recovery from freed pages.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Hodges <hodgesd@meta.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
An UAF issue was observed:
BUG: KASAN: slab-use-after-free in page_counter_uncharge+0x65/0x150
Write of size 8 at addr ffff888106715440 by task insmod/527
CPU: 4 UID: 0 PID: 527 Comm: insmod 6.19.0-rc7-next-20260129+ #11
Tainted: [O]=OOT_MODULE
Call Trace:
<TASK>
dump_stack_lvl+0x82/0xd0
kasan_report+0xca/0x100
kasan_check_range+0x39/0x1c0
page_counter_uncharge+0x65/0x150
dmem_cgroup_uncharge+0x1f/0x260
Allocated by task 527:
Freed by task 0:
The buggy address belongs to the object at ffff888106715400
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 64 bytes inside of
freed 512-byte region [ffff888106715400, ffff888106715600)
The buggy address belongs to the physical page:
Memory state around the buggy address:
ffff888106715300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888106715380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff888106715400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888106715480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888106715500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
The issue occurs because a pool can still be held by a caller after its
associated memory region is unregistered. The current implementation frees
the pool even if users still hold references to it (e.g., before uncharge
operations complete).
This patch adds a reference counter to each pool, ensuring that a pool is
only freed when its reference count drops to zero.
Fixes: b168ed458dde ("kernel/cgroup: Add "dmem" memory accounting cgroup")
Cc: stable@vger.kernel.org # v6.14+
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
A warnning was detected:
WARNING: suspicious RCU usage
6.19.0-rc7-next-20260129+ #1101 Tainted: G O
kernel/cgroup/dmem.c:456 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by insmod/532:
#0: ffffffff85e78b38 (dmemcg_lock){+.+.}-dmem_cgroup_unregister_region+
stack backtrace:
CPU: 2 UID: 0 PID: 532 Comm: insmod Tainted: 6.19.0-rc7-next-
Tainted: [O]=OOT_MODULE
Call Trace:
<TASK>
dump_stack_lvl+0xb0/0xd0
lockdep_rcu_suspicious+0x151/0x1c0
dmem_cgroup_unregister_region+0x1e2/0x380
? __pfx_dmem_test_init+0x10/0x10 [dmem_uaf]
dmem_test_init+0x65/0xff0 [dmem_uaf]
do_one_initcall+0xbb/0x3a0
The macro list_for_each_rcu() must be used within an RCU read-side critical
section (between rcu_read_lock() and rcu_read_unlock()). Using it outside
that context, as seen in dmem_cgroup_unregister_region(), triggers the
lockdep warning because the RCU protection is not guaranteed.
Replace list_for_each_rcu() with list_for_each_entry_safe(), which is
appropriate for traversal under spinlock protection where nodes may be
deleted.
Fixes: b168ed458dde ("kernel/cgroup: Add "dmem" memory accounting cgroup")
Cc: stable@vger.kernel.org # v6.14+
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
An issue was triggered:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 15 UID: 0 PID: 658 Comm: bash Tainted: 6.19.0-rc6-next-2026012
Tainted: [O]=OOT_MODULE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
RIP: 0010:strcmp+0x10/0x30
RSP: 0018:ffffc900017f7dc0 EFLAGS: 00000246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff888107cd4358
RDX: 0000000019f73907 RSI: ffffffff82cc381a RDI: 0000000000000000
RBP: ffff8881016bef0d R08: 000000006c0e7145 R09: 0000000056c0e714
R10: 0000000000000001 R11: ffff888107cd4358 R12: 0007ffffffffffff
R13: ffff888101399200 R14: ffff888100fcb360 R15: 0007ffffffffffff
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000105c79000 CR4: 00000000000006f0
Call Trace:
<TASK>
dmemcg_limit_write.constprop.0+0x16d/0x390
? __pfx_set_resource_max+0x10/0x10
kernfs_fop_write_iter+0x14e/0x200
vfs_write+0x367/0x510
ksys_write+0x66/0xe0
do_syscall_64+0x6b/0x390
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f42697e1887
It was trriggered setting max without limitation, the command is like:
"echo test/region0 > dmem.max". To fix this issue, add check whether
options is valid after parsing the region_name.
Fixes: b168ed458dde ("kernel/cgroup: Add "dmem" memory accounting cgroup")
Cc: stable@vger.kernel.org # v6.14+
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Alexei reported memory leak in update_ftrace_direct_del.
We miss cleanup of the replaced direct_functions in the
success path in update_ftrace_direct_del, adding that.
Fixes: 8d2c1233f371 ("ftrace: Add update_ftrace_direct_del function")
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Closes: https://lore.kernel.org/bpf/aX_BxG5EJTJdCMT9@krava/T/#m7c13f5a95f862ed7ab78e905fbb678d635306a0c
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20260202075849.1684369-1-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Fix a pointer arithmetic error in scx_sdt during freeing that
causes the allocator to use the wrong memory address for the
allocation's data header.
Fixes: 36929ebd17ae ("tools/sched_ext: add arena based scheduler")
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
In tegra_slink_probe(), when platform_get_irq() fails, it directly
returns from the function with an error code, which causes a memory leak.
Replace it with a goto label to ensure proper cleanup.
Fixes: eb9913b511f1 ("spi: tegra: Fix missing IRQ check in tegra_slink_probe()")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260202-slink-v1-1-eac50433a6f9@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In support of generic CXL protocol error handling across various 'struct
cxl_port' types, update find_cxl_port_by_uport() to retrieve endpoint CXL
port companions from endpoint PCIe device instances.
The end result is that upstream switch ports and endpoint ports can share
error handling and eventually delete the misplaced cxl_error_handlers from
the cxl_pci class driver.
Reviewed-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Tested-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20260131000403.2135324-10-dan.j.williams@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
In preparation for generic protocol error handling across CXL endpoints,
whether they be memory expander class devices or accelerators, drop the
endpoint component management from cxl_dev_state.
Organize all CXL port component management through the common cxl_port
driver.
Note that the end game is that drivers/cxl/core/ras.c loses all
dependencies on a 'struct cxl_dev_state' parameter and operates only on
port resources. The removal of component register mapping from cxl_pci is
an incremental step towards that.
Reviewed-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Tested-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20260131000403.2135324-9-dan.j.williams@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
In preparation for CXL VH (Virtual Host) topology protocol error handling,
add RAS capability registered mapping for all ports in a CXL VH topology.
This includes the RAS capabilities of Switch Upstream Ports, Switch
Downstream Ports, Host Bridge Ports ("upstream"), and Root Ports
("downstream")
Update cxl_port_add_dport() to map the upstream RAS capability on first
'dport' attach.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Terry Bowman <terry.bowman@amd.com>
Link: https://patch.msgid.link/20260131000403.2135324-8-dan.j.williams@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Towards the end goal of making all CXL RAS capability handling uniform
across host bridge ports, upstream switch ports, and endpoint ports, move
dport RAS setup. Move it to cxl_switch_port_probe() context for switch / VH
dports (via cxl_port_add_dport()) and cxl_endpoint_port_probe() context for
an RCH dport. Rename the RAS setup helper to devm_cxl_dport_ras_setup() for
symmetry with devm_cxl_switch_port_decoders_setup().
Only the RCH version needs to be exported and the cxl_test mocking can be
deleted with a dev_is_pci() check on the dport_dev.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Tested-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20260131000403.2135324-7-dan.j.williams@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
