| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
According to Section 3.2.2.1 of AccECN spec (RFC9768), if the Server
is in AccECN mode and in SYN-RCVD state, and if it receives a value of
zero on a pure ACK with SYN=0 and no SACK blocks, for the rest of the
connection the Server MUST NOT set ECT on outgoing packets and MUST
NOT respond to AccECN feedback. Nonetheless, as a Data Receiver it
MUST NOT disable AccECN feedback.
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-12-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Based on specification:
https://tools.ietf.org/id/draft-ietf-tcpm-accurate-ecn-28.txt
Based on Section 3.1.5 of AccECN spec (RFC9768), a TCP Server in
AccECN mode MUST NOT set ECT on any packet for the rest of the connection,
if it has received or sent at least one valid SYN or Acceptable SYN/ACK
with (AE,CWR,ECE) = (0,0,0) during the handshake.
In addition, a host in AccECN mode that is feeding back the IP-ECN
field on a SYN or SYN/ACK MUST feed back the IP-ECN field on the
latest valid SYN or acceptable SYN/ACK to arrive.
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-11-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
For Accurate ECN, the first SYN/ACK sent by the TCP server shall set
the ACE flag (Table 1 of RFC9768) and the AccECN option to complete the
capability negotiation. However, if the TCP server needs to retransmit
such a SYN/ACK (for example, because it did not receive an ACK
acknowledging its SYN/ACK, or received a second SYN requesting AccECN
support), the TCP server retransmits the SYN/ACK without the AccECN
option. This is because the SYN/ACK may be lost due to congestion, or a
middlebox may block the AccECN option. Furthermore, if this retransmission
also times out, to expedite connection establishment, the TCP server
should retransmit the SYN/ACK with (AE,CWR,ECE) = (0,0,0) and without the
AccECN option, while maintaining AccECN feedback mode.
This complies with Section 3.2.3.2.2 of the AccECN spec RFC9768.
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-10-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Before this patch, retransmitted SYN/ACK did not have a specific
synack_type; however, the upcoming patch needs to distinguish between
retransmitted and non-retransmitted SYN/ACK for AccECN negotiation to
transmit the fallback SYN/ACK during AccECN negotiation. Therefore, this
patch introduces a new synack_type (TCP_SYNACK_RETRANS).
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-9-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Based on AccECN spec (RFC9768) Section 3.1.4.1, if the sender of an
AccECN SYN (the TCP Client) times out before receiving the SYN/ACK, it
SHOULD attempt to negotiate the use of AccECN at least one more time
by continuing to set all three TCP ECN flags (AE,CWR,ECE) = (1,1,1) on
the first retransmitted SYN (using the usual retransmission time-outs).
If this first retransmission also fails to be acknowledged, in
deployment scenarios where AccECN path traversal might be problematic,
the TCP Client SHOULD send subsequent retransmissions of the SYN with
the three TCP-ECN flags cleared (AE,CWR,ECE) = (0,0,0).
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-8-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
According to Sections 3.1.2 and 3.1.3 of AccECN spec (RFC9768).
In Section 3.1.2, it says an AccECN implementation has no need to
recognize or support the Server response labelled 'Nonce' or ECN-nonce
feedback more generally, as RFC 3540 has been reclassified as Historic.
AccECN is compatible with alternative ECN feedback integrity approaches
to the nonce. The SYN/ACK labelled 'Nonce' with (AE,CWR,ECE) = (1,0,1)
is reserved for future use. A TCP Client (A) that receives such a SYN/ACK
follows the procedure for forward compatibility given in Section 3.1.3.
Then in Section 3.1.3, it says if a TCP Client has sent a SYN requesting
AccECN feedback with (AE,CWR,ECE) = (1,1,1) then receives a SYN/ACK with
the currently reserved combination (AE,CWR,ECE) = (1,0,1) but it does not
have logic specific to such a combination, the Client MUST enable AccECN
mode as if the SYN/ACK onfirmed that the Server supported AccECN and as
if it fed back that the IP-ECN field on the SYN had arrived unchanged.
Fixes: 3cae34274c79 ("tcp: accecn: AccECN negotiation").
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-7-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When AccECN is not successfully negociated for a TCP flow, it defaults
fallback to classic ECN (RFC3168). However, L4S service will fallback
to non-ECN.
This patch enables congestion control module to control whether it
should not fallback to classic ECN after unsuccessful AccECN negotiation.
A new CA module flag (TCP_CONG_NO_FALLBACK_RFC3168) identifies this
behavior expected by the CA.
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-6-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Two flags for congestion control (CC) module are added in this patch
related to AccECN negotiation. First, a new flag (TCP_CONG_NEEDS_ACCECN)
defines that the CC expects to negotiate AccECN functionality using the
ECE, CWR and AE flags in the TCP header.
Second, during ECN negotiation, ECT(0) in the IP header is used. This
patch enables CC to control whether ECT(0) or ECT(1) should be used on
a per-segment basis. A new flag (TCP_CONG_ECT_1_NEGOTIATION) defines the
expected ECT value in the IP header by the CA when not-yet initialized
for the connection.
The detailed AccECN negotiaotn can be found in IETF RFC9768.
Co-developed-by: Olivier Tilmans <olivier.tilmans@nokia.com>
Signed-off-by: Olivier Tilmans <olivier.tilmans@nokia.com>
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-5-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, GRO does not flush packets when the CWR bit is set.
A corresponding self-test is being added, in which the CWR flag
is set for two consecutive packets, but the first packet with the
CWR flag set will not be flushed immediately.
+===================+==========+===============+===========+
| Packet id | CWR flag | Payload | Flushing? |
+===================+==========+===============+===========+
| 0 | 0 | PAYLOAD_LEN | 0 |
| ... | 0 | PAYLOAD_LEN | 1 |
+-------------------+----------+---------------+-----------+
| NUM_PACKETS/2 - 1 | 1 | payload_len | 0 |
| NUM_PACKETS/2 | 1 | payload_len | 1 |
+-------------------+----------+---------------+-----------+
| ... | 0 | PAYLOAD_LEN | 0 |
| NUM_PACKETS | 0 | PAYLOAD_LEN | 1 |
+===================+==========+===============+===========+
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-4-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As AccECN may keep CWR bit asserted due to different
interpretation of the bit, flushing with GRO because of
CWR may effectively disable GRO until AccECN counter
field changes such that CWR-bit becomes 0.
There is no harm done from not immediately forwarding the
CWR'ed segment with RFC3168 ECN.
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-3-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add newly acked pkts EWMA. When ACK thinning occurs, select
between safer and unsafe cep delta in AccECN processing based
on it. If the packets ACKed per ACK tends to be large, don't
conservatively assume ACE field overflow.
This patch uses the existing 2-byte holes in the rx group for new
u16 variables withtout creating more holes. Below are the pahole
outcomes before and after this patch:
[BEFORE THIS PATCH]
struct tcp_sock {
[...]
u32 delivered_ecn_bytes[3]; /* 2744 12 */
/* XXX 4 bytes hole, try to pack */
[...]
__cacheline_group_end__tcp_sock_write_rx[0]; /* 2816 0 */
[...]
/* size: 3264, cachelines: 51, members: 177 */
}
[AFTER THIS PATCH]
struct tcp_sock {
[...]
u32 delivered_ecn_bytes[3]; /* 2744 12 */
u16 pkts_acked_ewma; /* 2756 2 */
/* XXX 2 bytes hole, try to pack */
[...]
__cacheline_group_end__tcp_sock_write_rx[0]; /* 2816 0 */
[...]
/* size: 3264, cachelines: 51, members: 178 */
}
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Co-developed-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-2-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
David Yang says:
====================
net: dsa: yt921x: Add DCB/QoS support
This series add DCB/QoS support to the driver.
v5: https://lore.kernel.org/r/20260128215202.2244266-1-mmyangfl@gmail.com
v4: https://lore.kernel.org/r/20260127020847.1482724-1-mmyangfl@gmail.com
v3: https://lore.kernel.org/r/20260125001328.3784006-1-mmyangfl@gmail.com
v2: https://lore.kernel.org/r/20260122194233.2777550-1-mmyangfl@gmail.com
v1: https://lore.kernel.org/r/20260119185935.2072685-1-mmyangfl@gmail.com
====================
Link: https://patch.msgid.link/20260131021854.3405036-1-mmyangfl@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Set up global DSCP/PCP priority mappings and add related DCB methods.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260131021854.3405036-6-mmyangfl@gmail.com
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
yt921x_chip_setup() is already pretty long, and is going to become
longer. Split it into parts.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260131021854.3405036-5-mmyangfl@gmail.com
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Create a helper function to centralize the logic for enabling and
disabling VLAN awareness on a port.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260131021854.3405036-4-mmyangfl@gmail.com
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Required by DCB/QoS support of the switch driver, since the rx packets
will have non-zero priorities.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260131021854.3405036-3-mmyangfl@gmail.com
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Packet priority is part of the tag, and the priority and code fields are
used by tx and rx. Make revisions to reflect the facts.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260131021854.3405036-2-mmyangfl@gmail.com
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This adds a binding for the Faraday FTSSP010 SSP controller,
a pretty straight-forward syncronous serial port and SPI
controller.
The bindings are submitted separately because the one device
that has this is using it in a "nonstandard way" with regards
to the electronics, and does not make it possible to develop
or test a proper driver. However we want to be able to add
this resource to the device trees and it's not complex.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260203-gemini-ssp-bindings-v1-1-6d85c9c72371@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If SDCA property is not present in the DisCo table, assume it
is present. This allows DAI links to be created from codec_info_list
instead of being skipped.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260203095923.3741674-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use functional topologies to support all RT721-related topology and
amplifier combinations,
e.g. sof-ptl-rt721.tplg, sof-ptl-rt721-l3-rt1320-l3.tplg.
If these entries are not removed, they will all use the sof-ptl-rt721.tplg.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260203100027.3741754-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The existing code test if (bt_link_mask_override) to overwrite the BT
link mask. This doesn't allow user to disable the BT link mask. User may
want to disable the BT link when it is detected by the NHLT.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20260203111545.3742255-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently the SoundWire BPT stream uses the paired link DMA but not
reserve it. It works without any issue because we assume the SoundWire
BPT will not run with audio streams simultaneously.
To support simultaneous audio and BPT streams, we need to use the
hda_dma_prepare/cleanup helpers to reserve the pair link host DMA.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20260203114027.3742558-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SoundWire BPT stream needs to use link and host DMAs. Thus we need
helpers to prepare and cleanup the link and host DMAs. Currently the
SoundWire BPT stream uses hda_cl_prepare/cleanup helpers. It works fine
because we assume the SwoundWire BPT will not run with audio streams
simultaneously. The new helpers are copied from hda_cl_prepare/cleanup
and add a flag to reserve the paired host and link DMAs. The new helpers
will be used by both code loader and SoundWire BPT.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20260203114027.3742558-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently, hda_dsp_stream_get/put are used to get/put the host dma.
However, we may want to use a hda stream that both host and link dma are
available. Add helper to find the hda stream and reserve/release it.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20260203114027.3742558-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds a setting to resolve the intermittent no-sound issue.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20260203084827.768238-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The link_mask variable is not changed after setting to
hdev->info.link_mask until it is used for another purpose to get the
used SoundWire links and set to mach->mach_params.links. Besides, the
link_mask variable should be reset before any link id is added to the
link_mask. To fix the issue above and avoid confusing, use the
hdev->info.link_mask variable directly to check if the SoundWire link
is enabled.
Fixes: 5226d19d4cae ("ASoC: SOF: Intel: use sof_sdw as default SDW machine driver")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260203072405.3716307-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add current (iova, len) to the iotlb gather, regardless of the setting
of PT_FEAT_FLUSH_RANGE or PT_FEAT_FLUSH_RANGE_NO_GAPS.
In gather_range_pages(), the current IOVA range is only added to
iotlb_gather when PT_FEAT_FLUSH_RANGE is set. Yet a virtual IOMMU with
NpCache uses only PT_FEAT_FLUSH_RANGE_NO_GAPS. In that case, iotlb_gather
will stay empty (start=ULONG_MAX, end=0) after initialization, and the
current (iova, len) will not be added to the iotlb_gather, causing
subsequent iommu_iotlb_sync() to perform IOTLB invalidation with wrong
parameters (e.g., amd_iommu_iotlb_sync() computes size from
gather->end - gather->start + 1, leading to an invalid range).
The disjoint check and sync for PT_FEAT_FLUSH_RANGE_NO_GAPS remain
unchanged: when the new range is disjoint from the existing gather,
we still sync first and then add the new range, so semantics for
NO_GAPS are preserved.
Fixes: 7c53f4238aa8 ("iommupt: Add unmap_pages op")
Cc: stable@vger.kernel.org
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yu Zhang <zhangyu1@linux.microsoft.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
With concurrent TLB invalidations, completion wait randomly gets timed out
because cmd_sem_val was incremented outside the IOMMU spinlock, allowing
CMD_COMPL_WAIT commands to be queued out of sequence and breaking the
ordering assumption in wait_on_sem().
Move the cmd_sem_val increment under iommu->lock so completion sequence
allocation is serialized with command queuing.
And remove the unnecessary return.
Fixes: d2a0cac10597 ("iommu/amd: move wait_on_sem() out of spinlock")
Tested-by: Srikanth Aithal <sraithal@amd.com>
Reported-by: Srikanth Aithal <sraithal@amd.com>
Signed-off-by: Ankit Soni <Ankit.Soni@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Not pausing it means that we can have the TCM work queued into a
non-freezable workqueue, which, in resume, is re-activated before the
driver's resume is called.
The TCM work might send commands to the FW before we resumed the device,
leading to an assert.
Closes: https://lore.kernel.org/linux-wireless/aTDoDiD55qlUZ0pn@debian.local/
Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Fixes: e8bb19c1d590 ("wifi: iwlwifi: support fast resume")
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260129212650.05621f3faedb.I44df9cf9183b5143df8078131e0d87c0fd7e1763@changeid
|
|
mlo_scan_start_wk is not canceled on disconnection. In fact, it is not
canceled anywhere except in the restart cleanup, where we don't really
have to.
This can cause an init-after-queue issue: if, for example, the work was
queued and then drv_change_interface got executed.
This can also cause use-after-free: if the work is executed after the
vif is freed.
Fixes: 9748ad82a9d9 ("wifi: iwlwifi: defer MLO scan after link activation")
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260129212650.a36482a60719.I5bf64a108ca39dacb5ca0dcd8b7258a3ce8db74c@changeid
|
|
Currently, s32g_pcie_parse_ports() exercises the 'err_port' path even
during the success case. This results in ports getting deleted after
successful parsing of Root Ports.
Hence, skip the removal of Root Ports during success.
Fixes: 5cbc7d3e316e ("PCI: s32g: Add NXP S32G PCIe controller driver (RC)")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
[mani: reworded subject and description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260202151050.1446165-1-vincent.guittot@linaro.org
|
|
if debugging is enabled the DEBUG statement will fail do to a bad
fat fingered cast.
Fixes: 102ada7ca37ed ("apparmor: fix fmt string type error in process_strs_entry")
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
wlc_phy_txpwr_srom_read_lcnphy() in wlc_phy_attach_lcnphy() always
returns true, making the error handling code unreachable. Change the
function's return type to void and remove the dead code, similar to
the cleanup done for wlc_phy_txpwr_srom_read_nphy() in commit
47f0e32ffe4e ("wifi: brcmsmac: phy: Remove unreachable code").
Signed-off-by: Ingyu Jang <ingyujang25@korea.ac.kr>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260131172355.3367673-1-ingyujang25@korea.ac.kr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Somehow this got changed to NULL when I ported this to upstream it. No
idea how that happened.
Reported-by: Carlos Llamas <cmllamas@google.com>
Closes: https://lore.kernel.org/r/aXkEiC1sGOGfDuzI@google.com
Fixes: c1ea31205edf ("rust_binder: add binder_transaction tracepoint")
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20260128-binder-fix-target-node-null-v1-1-78d198ef55a5@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The 'max' argument of ida_alloc_max() takes the maximum valid ID and not
the "count". Using an ID of BINDERFS_MAX_MINOR (1 << 20) for dev->minor
would exceed the limits of minor numbers (20-bits). Fix this off-by-one
error by subtracting 1 from the 'max'.
Cc: stable@vger.kernel.org
Fixes: 3ad20fe393b3 ("binder: implement binderfs")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20260127235545.2307876-2-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The 'max' argument of ida_alloc_max() takes the maximum valid ID and not
the "count". Using an ID of BINDERFS_MAX_MINOR (1 << 20) for dev->minor
would exceed the limits of minor numbers (20-bits). Fix this off-by-one
error by subtracting 1 from the 'max'.
Cc: stable@vger.kernel.org
Fixes: eafedbc7c050 ("rust_binder: add Rust Binder driver")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202512181203.IOv6IChH-lkp@intel.com/
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260127235545.2307876-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update call sites in binder files to import `ARef`
from `sync::aref` instead of `types`.
This aligns with the ongoing effort to move `ARef` and
`AlwaysRefCounted` to sync.
Suggested-by: Benno Lossin <lossin@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1173
Signed-off-by: Shankari Anand <shankari.ak0208@gmail.com>
Acked-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260102202714.184223-2-shankari.ak0208@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Clippy warns about a needless borrow in context.rs:
error: this expression creates a reference which is immediately dereferenced by the compiler
--> drivers/android/binder/context.rs:141:18
|
141 | func(&proc);
| ^^^^^ help: change this to: `proc`
Remove the unnecessary borrow to satisfy clippy and improve code
cleanliness. No functional change.
Signed-off-by: Shivam Kalra <shivamklr@cock.li>
Acked-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260130182842.217821-1-shivamklr@cock.li
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, if the command line passed to kexec_file_load() exceeds
the supported limit of the kernel being kexec'd, -EINVAL is returned
to userspace, which is consistent across architectures. Since
-EINVAL is not specific to this case, the kexec tool cannot provide
a specific reason for the failure. Many architectures emit an error
message in this case. Add a similar error message, including the
effective limit, since the command line length is configurable.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Enable BLK_DEV_NULL_BLK as module in defconfig and debug_defconfig, so the
Null Test Block Device Driver can be easily used for testing purposes.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Recently [1] s390 got stackprotector support. Document this.
[1] commit f5730d44e05e ("s390: Add stackprotector support")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Heiner Kallweit says:
====================
net: phy: remove modalias-based MDIO device bus matching
modalias-based MDIO device bus matching has only one user (dsa-loop),
where we can replace modalias-based matching with a simple custom
match function. This, and first patch of the series, lay the foundation
for removing modalias-based matching.
====================
Link: https://patch.msgid.link/d9543e7d-23e1-4dba-a6b3-35dcd6a35dec@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Last user dsa_loop has been migrated away from modalias-based matching,
so we can remove this feature now. It was the only user of MDIO_NAME_SIZE,
so remove also this constant.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/ce1c6df0-4785-4b28-8322-32dc6bceea18@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This change is a prerequisite for removing the MDIO device modalias,
as dsa_loop is the only user. Switch from modalias to a custom
bus match function.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/15a4318f-50b5-4df5-874e-e387ee070a9d@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Primary reason for this change is to remove the misuse of MDIO_NAME_SIZE
here, so that this constant can be removed in a follow-up patch.
Use case here is simply a chip name w/o any relationship to a MDIO
device. Also there's no need to reserve a longer char array, so make
the name a pointer.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/61bc14fa-eed3-43b6-ae40-b98063e81578@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a test case to verify correct synchronization between concurrent
readers and a revocation.
The test setup involves:
1. Consumer 1 enters the critical section (SRCU read lock) and verifies
access to the resource.
2. Provider attempts to revoke the resource. This should block until
Consumer 1 releases the lock.
3. Consumer 2 attempts to enter the critical section while revocation
is pending. It should see the resource as revoked (NULL).
4. Consumer 1 exits, allowing the revocation to complete.
This ensures that the SRCU mechanism correctly enforces grace periods
and that new readers are properly prevented from accessing the resource
once revocation has begun.
A way to run the test:
$ ./tools/testing/kunit/kunit.py run \
--kconfig_add CONFIG_REVOCABLE_KUNIT_TEST=y \
--kconfig_add CONFIG_PROVE_LOCKING=y \
--kconfig_add CONFIG_DEBUG_KERNEL=y \
--kconfig_add CONFIG_DEBUG_INFO=y \
--kconfig_add CONFIG_DEBUG_INFO_DWARF5=y \
--kconfig_add CONFIG_KASAN=y \
--kconfig_add CONFIG_DETECT_HUNG_TASK=y \
--kconfig_add CONFIG_DEFAULT_HUNG_TASK_TIMEOUT="10" \
--arch=x86_64 --raw_output=all \
revocable_test
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260129143733.45618-5-tzungbi@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The struct revocable handle stores the SRCU read-side index (idx) for
the duration of a resource access. If multiple threads share the same
struct revocable instance, they race on writing to the idx field,
corrupting the SRCU state and potentially causing unsafe unlocks.
Refactor the API to replace revocable_alloc()/revocable_free() with
revocable_init()/revocable_deinit(). This change requires the caller
to provide the storage for struct revocable.
By moving storage ownership to the caller, the API ensures that
concurrent users maintain their own private idx storage, eliminating
the race condition.
Reported-by: Johan Hovold <johan@kernel.org>
Closes: https://lore.kernel.org/all/20260124170535.11756-4-johan@kernel.org/
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260129143733.45618-4-tzungbi@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a test to verify that revocable_alloc() correctly handles race
conditions where the provider is being released.
The test covers three scenarios:
1. Allocating from a NULL provider.
2. Allocating from a provider that has been detached (pointer is NULL).
3. Allocating from a provider that is in the process of destruction
(refcount is 0), simulating a race between revocable_alloc() and
revocable_provider_release().
A way to run the test:
$ ./tools/testing/kunit/kunit.py run \
--kconfig_add CONFIG_REVOCABLE_KUNIT_TEST=y \
--kconfig_add CONFIG_PROVE_LOCKING=y \
--kconfig_add CONFIG_DEBUG_KERNEL=y \
--kconfig_add CONFIG_DEBUG_INFO=y \
--kconfig_add CONFIG_DEBUG_INFO_DWARF5=y \
--kconfig_add CONFIG_KASAN=y \
--kconfig_add CONFIG_DETECT_HUNG_TASK=y \
--kconfig_add CONFIG_DEFAULT_HUNG_TASK_TIMEOUT="10" \
--arch=x86_64 --raw_output=all \
revocable_test
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260129143733.45618-3-tzungbi@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are two race conditions when allocating a revocable instance:
1. After a struct revocable_provider is revoked, the caller might still
hold a dangling pointer to it. A subsequent call to
revocable_alloc() can trigger a use-after-free.
2. If revocable_provider_release() runs concurrently with
revocable_alloc(), the memory of struct revocable_provider can be
accessed during or after kfree().
To fix these:
- Manage the lifetime of struct revocable_provider using RCU. Annotate
pointers to it with __rcu and use kfree_rcu() for deallocation.
- Update revocable_alloc() to safely acquire a reference using RCU
primitives.
- Update revocable_provider_revoke() to take a double pointer (`**rp`).
It atomically NULLs out the caller's pointer before starting
revocation. This prevents the caller from holding a dangling pointer.
- Drop devm_revocable_provider_alloc(). The devm-managed model cannot
support the required double-pointer semantic for safe pointer nulling.
Reported-by: Johan Hovold <johan@kernel.org>
Closes: https://lore.kernel.org/all/aXdy-b3GOJkzGqYo@hovoldconsulting.com/
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260129143733.45618-2-tzungbi@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Capitalize comment starts to match kernel coding style.
Fix spelling: "reciever" -> "receiver"
Fix grammar: "it's" (contraction of "it is") -> "its" (possessive)
Remove uncertainty from "Clear error bits?" comment.
Compile tested only.
Signed-off-by: Micah Ostrow <bluefox9516@gmail.com>
Link: https://patch.msgid.link/20260127181735.57132-1-bluefox9516@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
