| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[Why]
DCN 3.6+ hardware supports CRC-32 polynomial in addition to the
legacy CRC-16. Enable 32-bit CRC values per color component for
improvement of precision in display validation.
[How]
When userspace sets crc_poly_mode (0=CRC-16, 1=CRC-32) via the debugfs
interface, the value is stored in dm_irq_params.crc_poly_mode. When CRC
source configuration triggers amdgpu_dm_crtc_configure_crc_source(),
crc_poly_mode is retrieved from dm_irq_params and passed to
dc_stream_configure_crc().
In the DC layer, dc_stream_configure_crc() sets crc_poly_mode into the
crc_params structure and passes it to optc35_configure_crc(). If the
hardware supports the OTG_CRC_POLY_SEL register, the register is
programmed to select CRC-16 or CRC-32 polynomial.
When reading CRC values, optc35_get_crc() checks whether CRC32 register
masks are available. If present, it reads 32-bit CRC values from
OTG_CRC0/1_DATA_R32/G32/B32 registers; otherwise, it falls back
to reading 16-bit CRC values from legacy OTG_CRC0/1_DATA_RG/B
registers.
Reviewed-by: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why/How]
Data types should match what is expected.
Update/cast data accordingly.
Also change ASSERT to use DML_ASSERT instead
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Zheng Austin <Austin.Zheng@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Direct DIO registers access in hwseq layer was creating register conflicts.
[how]
Migrated DIO registers from hwseq to dio component.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Signed-off-by: Bhuvanachandra Pinninti <bpinnint@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
commit f81cd793119e ("drm/amd/amdgpu: Fix MES init sequence") caused
a dependency on new enough MES firmware to use amdgpu. This was fixed
on most gfx11 and gfx12 hardware with commit 0180e0a5dd5c
("drm/amdgpu/mes: add compatibility checks for set_hw_resource_1"), but
this left out that GC 11.0.4 had breakage at MES 0x51.
Bump the requirement to 0x52 instead.
Reported-by: danijel@nausys.com
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4576
Fixes: f81cd793119e ("drm/amd/amdgpu: Fix MES init sequence")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Post-driver cases always use linear tiling yet there is no dedicated
Gfx handling for this condition.
[How]
Add DcGfxBase/DalGfxBase to gfx version enums and set tiling to linear
when it is used. Also, enforce the use of proper tiling format as tiling
information is used.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Nicholas Carbones <ncarbone@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
hws->funcs.dccg_init is accessed without checking if it is NULL, which
may lead to a NULL pointer dereference.
[how]
Add a NULL check before calling dccg_init.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Fix the IGT ilr_link-training-configs test failure
by directly using the supported link rates from DPCD.
Reviewed-by: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT]
Add oem panel config for below features:
- CACP_v2
- Adaptive VariBright
- Replay_FrameSkipping
- Replay_teamsOpt
- Ramless Idle Opt
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
IGT link-training-configs test fails to set the link rate on Replay panels
because some link rate types are not supported in debugfs. As a result,
debugfs treats these link rates as invalid, causing the IGT test to fail.
[How]
Add missing link rate types to resolve this issue.
Reviewed-by: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT]
1. Set no scaling for writeback as they are hardcoded in DCN3.2+.
2. Set no fast plane update for writeback commits.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In order to have few DCN35 functions be leveraged for future ASIC
implementations. Expose them to the dcn35_dccg.h header.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
FGCG shouldn't be called at the DC resource level as part of DSC
creation because dc_create is intended for SW init, not HW init, and
register access is not guaranteed to work at this phase.
[How]
Add a set_fgcg function at the DSC interface level.
Existing ASIC can continue using the function in DC resource to retain
current compatibility but further development should favor calling
the function pointer during init_hw (if it exists).
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The logic for the OTG disable workaround is particularly complex and
should be leveraged going forward instead of reimplementing and
maintaining it for multiple ASIC.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
To correctly control external panel replay fsm.
[HOW]
1. External panel replay is 1-A option only now.
2. Update cursor update and dirty rects commands for external
panel replay support.
3. Add external panel replay support flag in dc.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Memory bandwidth calculations work differently than for ddr.
Add lpddr5 handling.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Direct DCCG register access in hwseq layer was creating register conflicts.
[how]
Migrated DCCG registers from hwseq to dccg component.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Bhuvanachandra Pinninti <bpinnint@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add a full memory barrier after clearing no_hw_access in
amdgpu_device_mode1_reset() so subsequent PCI state restore
access cannot observe stale state on other CPUs.
Fixes: 7edb503fe4b6 ("drm/amd/pm: Disable MMIO access during SMU Mode 1 reset")
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
dev_pm_clear_wake_irq() currently uses a dangerous pattern where
dev->power.wakeirq is read and checked for NULL outside the lock.
If two callers invoke this function concurrently, both might see
a valid pointer and proceed. This could result in a double-free
when the second caller acquires the lock and tries to release the
same object.
Address this by removing the lockless check of dev->power.wakeirq.
Instead, acquire dev->power.lock immediately to ensure the check and
the subsequent operations are atomic. If dev->power.wakeirq is NULL
under the lock, simply unlock and return. This guarantees that
concurrent calls cannot race to free the same object.
Based on a quick scan of current users, I did not find an actual bug as
drivers seem to rely on their own synchronization. However, since
asynchronous usage patterns exist (e.g., in
drivers/net/wireless/ti/wlcore), I believe a race is theoretically
possible if the API is used less carefully in the future. This change
hardens the API to be robust against such cases.
Fixes: 4990d4fe327b ("PM / Wakeirq: Add automated device wake IRQ handling")
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://patch.msgid.link/20260203031943.1924-1-hanguidong02@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Due to commit 37c6dccd6837 ("cpufreq: Remove LATENCY_MULTIPLIER")
updating the acquisition logic of cpufreq_policy_transition_delay_us(),
the original description of 2 ms has become inaccurate.
Therefore, update the description of the default value for
rate_limit_us from 2ms to 1ms.
Signed-off-by: Yaxiong Tian <tianyaxiong@kylinos.cn>
[ rjw: Subject and changelog edits ]
Link: https://patch.msgid.link/20260203093501.1138721-1-tianyaxiong@kylinos.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
According to the description in the intel_pstate.rst documentation,
Capacity-Aware Scheduling and Energy-Aware Scheduling are only
supported on a hybrid processor without SMT. Previously, the system
used sched_smt_active() for judgment, which is not a strict condition
because users can switch it on or off via /sys at any time.
This could lead to incorrect driver settings in certain scenarios.
For example, on a CPU that supports SMT, a user can disable SMT
via the nosmt parameter to enable asym capacity, and then re-enable
SMT via /sys. In such cases, some settings in the driver would no
longer be correct.
To address this issue, replace sched_smt_active() with cpu_smt_possible(),
and only enable asym capacity when CPU SMT is not possible.
Fixes: 929ebc93ccaa ("cpufreq: intel_pstate: Set asymmetric CPU capacity on hybrid systems")
Signed-off-by: Yaxiong Tian <tianyaxiong@kylinos.cn>
[ rjw: Subject and changelog edits ]
Link: https://patch.msgid.link/20260203024852.301066-1-tianyaxiong@kylinos.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Switch to device property accessors.
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Link: https://patch.msgid.link/20260203-spi-xilinx-v4-1-42f7c326061b@nexthop.ai
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The machine can be calculated from a thread via its maps.
Don't require the machine argument to simplify callers and also to delay
computing the machine until a little later.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Aditya Bodkhe <aditya.b1@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <pjw@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quan Zhou <zhouquan@iscas.ac.cn>
Cc: Shimin Guo <shimin.guo@skydio.com>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yunseong Kim <ysk@kzalloc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add 64-bits of feature data to record the ELF machine and flags.
This allows readers to initialize based on the data.
For example, `perf kvm stat` wants to initialize based on the kind of
data to be read, but at initialization time there are no threads to base
this data upon and using the host means cross platform support won't
work.
The values in the perf_env also act as a cache for these within the
session.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Aditya Bodkhe <aditya.b1@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <pjw@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quan Zhou <zhouquan@iscas.ac.cn>
Cc: Shimin Guo <shimin.guo@skydio.com>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yunseong Kim <ysk@kzalloc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Allow e_flags as well as e_machine to be computed using the e_machine
helper.
This isn't currently used, the argument is always NULL, but it will be
used for a new header feature.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Aditya Bodkhe <aditya.b1@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <pjw@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quan Zhou <zhouquan@iscas.ac.cn>
Cc: Shimin Guo <shimin.guo@skydio.com>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yunseong Kim <ysk@kzalloc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Pass the e_machine to the kvm functions so that they aren't just wired
to EM_HOST.
In the case of a session move some setup until the session
is created.
As the session isn't fully running the default EM_HOST is returned as no
e_machine can be found in a running machine.
This is, however, some marginal progress to cross platform support.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Aditya Bodkhe <aditya.b1@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <pjw@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quan Zhou <zhouquan@iscas.ac.cn>
Cc: Shimin Guo <shimin.guo@skydio.com>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yunseong Kim <ysk@kzalloc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
`perf kvm stat` supports record and report options.
By using the arch directory a report for a different machine type cannot
be supported.
Move the kvm-stat code out of the arch directory and into
util/kvm-stat-arch following the pattern of perf-regs and dwarf-regs.
Avoid duplicate symbols by renaming functions to have the architecture
name within them.
For global variables, wrap them in an architecture specific function.
Selecting the architecture to use with `perf kvm stat` is selected by
EM_HOST, ie no different than before the change.
Later the ELF machine can be determined from the session or a header
feature (ie EM_HOST at the time of the record).
The build and #define HAVE_KVM_STAT_SUPPORT is now redundant so remove
across Makefiles and in the build.
Opportunistically constify architectural structs and arrays.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Aditya Bodkhe <aditya.b1@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <pjw@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quan Zhou <zhouquan@iscas.ac.cn>
Cc: Shimin Guo <shimin.guo@skydio.com>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yunseong Kim <ysk@kzalloc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When building tools/perf the CFLAGS can contain a directory for the
installed headers.
As the headers may be being installed while building libperf.a this can
cause headers to be partially installed and found in the include path
while building an object file for libperf.a.
The installed header may reference other installed headers that are
missing given the partial nature of the install and then the build fails
with a missing header file.
Avoid this by ensuring the libperf source headers are always first in
the CFLAGS.
Fixes: 3143504918105156 ("libperf: Make libperf.a part of the perf build")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Ensure the `perf kvm stat live -p ..` has some basic functionality.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Aditya Bodkhe <aditya.b1@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <pjw@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quan Zhou <zhouquan@iscas.ac.cn>
Cc: Shimin Guo <shimin.guo@skydio.com>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yunseong Kim <ysk@kzalloc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host for v6.20
- amd-mp2, designware, mlxbf, rtl9300, spacemit, tegra: cleanups
- designware: use a dedicated algorithm for AMD Navi
- designware: replace magic numbers with named constants
- designware: replace min_t() with min() to avoid u8 truncation
- designware: refactor core to enable mode switching
- imx-lpi2c: add runtime PM support for IRQ and clock handling
- lan9691-i2c: add new driver
- rtl9300: use OF helpers directly and avoid fwnode handling
- spacemit: add bus reset support
- units: add HZ_PER_GHZ and use it in several i2c drivers
|
|
When a block read returns an invalid length, zero or >I2C_SMBUS_BLOCK_MAX,
the length handler sets the state to IMX_I2C_STATE_FAILED. However,
i2c_imx_master_isr() unconditionally overwrites this with
IMX_I2C_STATE_READ_CONTINUE, causing an endless read loop that overruns
buffers and crashes the system.
Guard the state transition to preserve error states set by the length
handler.
Fixes: 5f5c2d4579ca ("i2c: imx: prevent rescheduling in non dma mode")
Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
Cc: <stable@vger.kernel.org> # v6.13+
Reviewed-by: Stefan Eichenberger <eichest@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260116111906.3413346-2-Qing-wu.Li@leica-geosystems.com.cn
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
This fixes a kernel oops when reading ceph snapshot directories (.snap),
for example by simply running `ls /mnt/my_ceph/.snap`.
The variable str is guarded by __free(kfree), but advanced by one for
skipping the initial '_' in snapshot names. Thus, kfree() is called
with an invalid pointer. This patch removes the need for advancing the
pointer so kfree() is called with correct memory pointer.
Steps to reproduce:
1. Create snapshots on a cephfs volume (I've 63 snaps in my testcase)
2. Add cephfs mount to fstab
$ echo "samba-fileserver@.files=/volumes/datapool/stuff/3461082b-ecc9-4e82-8549-3fd2590d3fb6 /mnt/test/stuff ceph acl,noatime,_netdev 0 0" >> /etc/fstab
3. Reboot the system
$ systemctl reboot
4. Check if it's really mounted
$ mount | grep stuff
5. List snapshots (expected 63 snapshots on my system)
$ ls /mnt/test/stuff/.snap
Now ls hangs forever and the kernel log shows the oops.
Cc: stable@vger.kernel.org
Fixes: 101841c38346 ("[ceph] parse_longname(): strrchr() expects NUL-terminated string")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220807
Suggested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Daniel Vogelbacher <daniel@chaospixel.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Similar to commit 870611e4877e ("rbd: get snapshot context after
exclusive lock is ensured to be held"), move the "beyond EOD" check
into the image request state machine so that it's performed after
exclusive lock is ensured to be held. This avoids various race
conditions which can arise when the image is shrunk under I/O (in
practice, mostly readahead). In one such scenario
rbd_assert(objno < rbd_dev->object_map_size);
can be triggered if a close-to-EOD read gets queued right before the
shrink is initiated and the EOD check is performed against an outdated
mapping_size. After the resize is done on the server side and exclusive
lock is (re)acquired bringing along the new (now shrunk) object map, the
read starts going through the state machine and rbd_obj_may_exist() gets
invoked on an object that is out of bounds of rbd_dev->object_map array.
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@linux.dev>
|
|
So far we've been fairly lax about accepting both unknown CMN models
(at least with a warning), and unknown revisions of those which we
do know, as although things do frequently change between releases,
typically enough remains the same to be somewhat useful for at least
some basic bringup checks. However, we also make assumptions of the
maximum supported sizes and numbers of things in various places, and
there's no guarantee that something new might not be bigger and lead
to nasty array overflows. Make sure we only try to run on things that
actually match our assumptions and so will not risk memory corruption.
We have at least always failed on completely unknown node types, so
update that error message for clarity and consistency too.
Cc: stable@vger.kernel.org
Fixes: 7819e05a0dce ("perf/arm-cmn: Revamp model detection")
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When arm_spe_pmu_next_off() fails to calculate a valid limit, it returns
zero to indicate that tracing should not start. However, the caller
arm_spe_perf_aux_output_begin() does not propagate this failure by
updating hwc->state, cause the error to be silently ignored by upper
layers.
Because hwc->state remains zero after a failure, arm_spe_pmu_start()
continues to programs filter registers unnecessarily. The driver
still reports success to the perf core, so the core assumes the SPE
event was enabled and proceeds to enable other events. This breaks
event group semantics: SPE is already stopped while other events in the
same group are enabled.
Fix this by updating arm_spe_perf_aux_output_begin() to return a status
code indicating success (0) or failure (-EIO). Both the interrupt
handler and arm_spe_pmu_start() check the return value and call
arm_spe_pmu_stop() to set PERF_HES_STOPPED in hwc->state.
In the interrupt handler, the period (e.g., period_left) needs to be
updated, so PERF_EF_UPDATE is passed to arm_spe_pmu_stop(). When the
error occurs during event start, the trace unit is not yet enabled, so
a flag '0' is used to drain buffer and update state only.
Fixes: d5d9696b0380 ("drivers/perf: Add support for ARMv8.2 Statistical Profiling Extension")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add a kernel config option to set the default value of
workqueue.panic_on_stall, similar to CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC,
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC and CONFIG_BOOTPARAM_HUNG_TASK_PANIC.
This allows setting the number of workqueue stalls before triggering
a kernel panic at build time, which is useful for high-availability
systems that need consistent panic-on-stall, in other words, those
servers which run with CONFIG_BOOTPARAM_*_PANIC=y already.
The default remains 0 (disabled). Setting it to 1 will panic on the
first stall, and higher values will panic after that many stall
warnings. The value can still be overridden at runtime via the
workqueue.panic_on_stall boot parameter or sysfs.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The driver currently returns an incorrect error code when a chain command
fails. In this case, ERT_CMD_STATE_ERROR is expected to be reported for
failed chain commands.
Fixes: aac243092b70 ("accel/amdxdna: Add command execution")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260203184037.2751889-1-lizhi.hou@amd.com
|
|
Emil Tsalapatis says:
====================
bpf: Add bpf_stream_print_stack kfunc
Add a new bpf_stream_print_stack kfunc for printing a BPF program stack
into a BPF stream. Update the verifier to allow the new kfunc to be
called with BPF spinlocks held, along with bpf_stream_vprintk.
Patchset spun out of the larger libarena + ASAN patchset.
(https://lore.kernel.org/bpf/20260127181610.86376-1-emil@etsalapatis.com/)
Changeset:
- Update bpf_stream_print_stack to take stream_id arg (Kumar)
- Added selftest for the bpf_stream_print_stack
- Add selftest for calling the streams kfuncs under lock
v2->v1: (https://lore.kernel.org/bpf/20260202193311.446717-1-emil@etsalapatis.com/)
- Updated Signed-off-by to be consistent with past submissions
- Updated From email to be consistent with Signed-off-by
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
====================
Link: https://patch.msgid.link/20260203180424.14057-1-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a selftest to ensure BPF stream functions can now be called
while holding a lock.
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260203180424.14057-5-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The BPF stream kfuncs bpf_stream_vprintk and bpf_stream_print_stack
do not sleep and so are safe to call while holding a lock. Amend
the verifier to allow that.
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260203180424.14057-4-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add selftests for the new bpf_stream_print_stack kfunc.
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260203180424.14057-3-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a new kfunc called bpf_stream_print_stack to be used by programs
that need to print out their current BPF stack. The kfunc is essentially
a wrapper around the existing bpf_stream_dump_stack functionality used
to generate stack traces for error events like may_goto violations and
BPF-side arena page faults.
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260203180424.14057-2-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Puranjay Mohan says:
====================
bpf: Improve state pruning for scalar registers
V2: https://lore.kernel.org/all/20260203022229.1630849-1-puranjay@kernel.org/
Changes in V3:
- Fix spelling mistakes in commit logs (AI)
- Fix an incorrect comment in the selftest added in patch 5 (AI)
- Improve the title of patch 5
V1: https://lore.kernel.org/all/20260202104414.3103323-1-puranjay@kernel.org/
Changes in V2:
- Collected acked by Eduard
- Removed some unnecessary comments
- Added a selftest for id=0 equivalence in Patch 5
This series improves BPF verifier state pruning by relaxing scalar ID
equivalence requirements. Scalar register IDs are used to track
relationships between registers for bounds propagation. However, once
an ID becomes "singular" (only one register/stack slot carries it), it
can no longer participate in bounds propagation and becomes stale.
These stale IDs can prevent pruning of otherwise equivalent states.
The series addresses this in four patches:
Patch 1: Assign IDs on stack fills to ensure stack slots have IDs
before being read into registers, preparing for the singular ID
clearing in patch 2.
Patch 2: Clear IDs that appear only once before caching, as they cannot
contribute to bounds propagation.
Patch 3: Relax maybe_widen_reg() to only compare value-tracking fields
(bounds, tnum, var_off) rather than also requiring ID matches. Two
scalars with identical value constraints but different IDs represent
the same abstract value and don't need widening.
Patch 4: Relax scalar ID equivalence in state comparison by treating
rold->id == 0 as "independent". If the old state didn't rely on ID
relationships for a register, any linking in the current state only
adds constraints and is safe to accept for pruning.
Patch 5: Add a selftest to show the exact case being handled by Patch 4
I ran veristat on BPF programs from sched_ext, meta's internal programs,
and on selftest programs, showing programs with insn diff > 5%:
Scx Progs
File Program States (A) States (B) States (DIFF) Insns (A) Insns (B) Insns (DIFF)
------------------ ------------------- ---------- ---------- ------------- --------- --------- ---------------
scx_rusty.bpf.o rusty_set_cpumask 320 230 -90 (-28.12%) 4478 3259 -1219 (-27.22%)
scx_bpfland.bpf.o bpfland_select_cpu 55 49 -6 (-10.91%) 691 618 -73 (-10.56%)
scx_beerland.bpf.o beerland_select_cpu 27 25 -2 (-7.41%) 320 295 -25 (-7.81%)
scx_p2dq.bpf.o p2dq_init 265 250 -15 (-5.66%) 3423 3233 -190 (-5.55%)
scx_layered.bpf.o layered_enqueue 1461 1386 -75 (-5.13%) 14541 13792 -749 (-5.15%)
FB Progs
File Program States (A) States (B) States (DIFF) Insns (A) Insns (B) Insns (DIFF)
------------ ------------------- ---------- ---------- -------------- --------- --------- ---------------
bpf007.bpf.o bpfj_free 1726 1342 -384 (-22.25%) 25671 19096 -6575 (-25.61%)
bpf041.bpf.o armr_net_block_init 22373 20411 -1962 (-8.77%) 651697 602873 -48824 (-7.49%)
bpf227.bpf.o layered_quiescent 28 26 -2 (-7.14%) 365 340 -25 (-6.85%)
bpf248.bpf.o p2dq_init 263 248 -15 (-5.70%) 3370 3159 -211 (-6.26%)
bpf254.bpf.o p2dq_init 263 248 -15 (-5.70%) 3388 3177 -211 (-6.23%)
bpf241.bpf.o p2dq_init 264 249 -15 (-5.68%) 3428 3240 -188 (-5.48%)
bpf230.bpf.o p2dq_init 287 271 -16 (-5.57%) 3666 3431 -235 (-6.41%)
bpf251.bpf.o lavd_cpu_offline 321 316 -5 (-1.56%) 6221 5891 -330 (-5.30%)
bpf251.bpf.o lavd_cpu_online 321 316 -5 (-1.56%) 6219 5889 -330 (-5.31%)
Selftest Progs
File Program States (A) States (B) States (DIFF) Insns (A) Insns (B) Insns (DIFF)
---------------------------------- ----------------- ---------- ---------- ------------- --------- --------- ---------------
verifier_iterating_callbacks.bpf.o test2 4 2 -2 (-50.00%) 29 18 -11 (-37.93%)
verifier_iterating_callbacks.bpf.o test3 4 2 -2 (-50.00%) 31 19 -12 (-38.71%)
strobemeta_bpf_loop.bpf.o on_event 318 221 -97 (-30.50%) 3938 2755 -1183 (-30.04%)
bpf_qdisc_fq.bpf.o bpf_fq_dequeue 133 105 -28 (-21.05%) 1686 1385 -301 (-17.85%)
iters.bpf.o delayed_read_mark 6 5 -1 (-16.67%) 60 46 -14 (-23.33%)
arena_strsearch.bpf.o arena_strsearch 107 106 -1 (-0.93%) 1394 1258 -136 (-9.76%)
====================
Link: https://patch.msgid.link/20260203165102.2302462-1-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test that two registers with their id=0 (unlinked) in the cached state
can be mapped to a single id (linked) in the current state.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260203165102.2302462-6-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Scalar register IDs are used by the verifier to track relationships
between registers and enable bounds propagation across those
relationships. Once an ID becomes singular (i.e. only a single
register/stack slot carries it), it can no longer contribute to bounds
propagation and effectively becomes stale. The previous commit makes the
verifier clear such ids before caching the state.
When comparing the current and cached states for pruning, these stale
IDs can cause technically equivalent states to be considered different
and thus prevent pruning.
For example, in the selftest added in the next commit, two registers -
r6 and r7 are not linked to any other registers and get cached with
id=0, in the current state, they are both linked to each other with
id=A. Before this commit, check_scalar_ids would give temporary ids to
r6 and r7 (say tid1 and tid2) and then check_ids() would map tid1->A,
and when it would see tid2->A, it would not consider these state
equivalent.
Relax scalar ID equivalence by treating rold->id == 0 as "independent":
if the old state did not rely on any ID relationships for a register,
then any ID/linking present in the current state only adds constraints
and is always safe to accept for pruning. Implement this by returning
true immediately in check_scalar_ids() when old_id == 0.
Maintain correctness for the opposite direction (old_id != 0 && cur_id
== 0) by still allocating a temporary ID for cur_id == 0. This avoids
incorrectly allowing multiple independent current registers (id==0) to
satisfy a single linked old ID during mapping.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260203165102.2302462-5-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
