| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The timeout helpers (handle_se_timeout() and handle_gpi_timeout())
took a 'struct spi_message *msg' that was never used. Remove this
parameter and adjust the callers to simplify the interfaces.
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260204162854.1206323-4-praveen.talari@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The driver currently skips the abort sequence for target mode when serial
engine errors occur. This leads to improper error recovery as the serial
engine may remain in an undefined state without proper cleanup, potentially
causing subsequent operations to fail or behave unpredictably.
Fix this by ensuring the abort sequence and DMA reset always execute during
error recovery, as both are required for proper serial engine error
handling.
Co-developed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260204162854.1206323-3-praveen.talari@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
functions
The current implementation always allocates a host controller and sets the
target flag later when the "spi-slave" device tree property is present.
This approach is suboptimal as it doesn't utilize the dedicated allocation
functions designed for target mode.
Use devm_spi_alloc_target() when "spi-slave" device tree property is
present, otherwise use devm_spi_alloc_host(). This replaces the previous
approach of always allocating a host controller and setting target flag
later.
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260204162854.1206323-2-praveen.talari@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Kuniyuki Iwashima says:
====================
bpf: Misc changes around AF_UNIX.
Patch 1 adapts sk_is_XXX() helpers in __cgroup_bpf_run_filter_sock_addr().
Patch 2 removes an unnecessary sk_fullsock() in bpf_skc_to_unix_sock().
====================
Link: https://patch.msgid.link/20260203213442.682838-1-kuniyu@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
AF_UNIX does not use TCP_NEW_SYN_RECV nor TCP_TIME_WAIT and
checking sk->sk_family is sufficient.
Let's remove sk_fullsock() and use sk_is_unix() in
bpf_skc_to_unix_sock().
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260203213442.682838-3-kuniyu@google.com
|
|
sk->sk_family should be read with READ_ONCE() in
__cgroup_bpf_run_filter_sock_addr() due to IPV6_ADDRFORM.
Also, the comment there is a bit stale since commit 859051dd165e
("bpf: Implement cgroup sockaddr hooks for unix sockets"), and the
kdoc has the same comment.
Let's use sk_is_inet() and sk_is_unix() and remove the comment.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260203213442.682838-2-kuniyu@google.com
|
|
Final KVM fixes for 6.19:
- Fix a bug where AVIC is incorrectly inhibited when running with x2AVIC
disabled via module param (or on a system without x2AVIC).
- Fix a dangling device posted IRQs bug by explicitly checking if the irqfd is
still active (on the list) when handling an eventfd signal, instead of
zeroing the irqfd's routing information when the irqfd is deassigned.
Zeroing the irqfd's routing info causes arm64 and x86's to not disable
posting for the IRQ (kvm_arch_irq_bypass_del_producer() looks for an MSI),
incorrectly leaving the IRQ in posted mode (and leading to use-after-free
and memory leaks on AMD in particular).
This is both the most pressing and scariest, but it's been in -next for
a while.
- Disable FORTIFY_SOURCE for KVM selftests to prevent the compiler from
generating calls to the checked versions of memset() and friends, which
leads to unexpected page faults in guest code due e.g. __memset_chk@plt
not being resolved.
- Explicitly configure the support XSS from within {svm,vmx}_set_cpu_caps() to
fix a bug where VMX will compute the reference VMCS configuration with SHSTK
and IBT enabled, but then compute each CPUs local config with SHSTK and IBT
disabled if not all CET xfeatures are enabled, e.g. if the kernel is built
with X86_KERNEL_IBT=n. The mismatch in features results in differing nVMX
setting, and ultimately causes kvm-intel.ko to refuse to load with nested=1.
|
|
Frank Li maintains the Freescale eDMA driver, has worked on DW eDMA
improvements, and actively helps review DMA-related code.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260130042039.1842939-1-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Update interrupt maxItems to 16 from 13 per GPI instance to support
Glymur, Qualcomm's latest gen SoC
Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251231133114.2752822-1-pankaj.patil@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The clocks in fsl_edma_engine::muxclk are allocated and enabled with
devm_clk_get_enabled(), which automatically cleans these resources up,
but these clocks are also manually disabled in fsl_edma_remove(). This
causes warnings on driver removal for each clock:
edma_module already disabled
WARNING: CPU: 0 PID: 418 at drivers/clk/clk.c:1200 clk_core_disable+0x198/0x1c8
[...]
Call trace:
clk_core_disable+0x198/0x1c8 (P)
clk_disable+0x34/0x58
fsl_edma_remove+0x74/0xe8 [fsl_edma]
[...]
---[ end trace 0000000000000000 ]---
edma_module already unprepared
WARNING: CPU: 0 PID: 418 at drivers/clk/clk.c:1059 clk_core_unprepare+0x1f8/0x220
[...]
Call trace:
clk_core_unprepare+0x1f8/0x220 (P)
clk_unprepare+0x34/0x58
fsl_edma_remove+0x7c/0xe8 [fsl_edma]
[...]
---[ end trace 0000000000000000 ]---
Fix these warnings by removing the unnecessary fsl_disable_clocks() call
in fsl_edma_remove().
Fixes: a9903de3aa16 ("dmaengine: fsl-edma: refactor using devm_clk_get_enabled")
Signed-off-by: Jared Kangas <jkangas@redhat.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113-fsl-edma-clock-removal-v1-1-2025b49e7bcc@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The second kill_bdev() call in set_blocksize() is redundant as the first
call already clears all buffers and pagecache, and locks prevent new
pagecache creation between the calls.
Signed-off-by: Yang Xiuwei <yangxiuwei@kylinos.cn>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Shawn Guo is moving on from maintaining the NXP i.MX platform and
hands over to Frank Li. Shawn has maintained the platform for 15 years
after initially upstreaming support for i.MX6 and i.MX23/28, and his
work has helped make this the most important industrial embedded Linux
platform. Roughly one out of five devicetree files in mainline kernels
are for the wider i.MX platform. Many thanks to Shawn for the taking
care of the platform all these years!
There are also two additional updates for the MAINTAINERS file, and a
fix for error handling in the qualcomm smem driver"
* tag 'soc-fixes-6.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: Change Sudeep Holla's email address
MAINTAINERS: Add myself as maintainer of hisi_soc_hha
soc: qcom: smem: fix qcom_smem_is_available and check if __smem is valid
MAINTAINERS: Replace Shawn with Frank as i.MX platform maintainer
|
|
The root decoder provides the callbacks hpa_to_spa and spa_to_hpa to
perform Host Physical Address (HPA) and System Physical Address
translations, respectively. The callbacks are required to convert
addresses when HPA != SPA. XOR interleaving depends on this mechanism,
and the necessary handlers are implemented.
The translation handlers are used for poison injection
(trace_cxl_poison, cxl_poison_inject_fops) and error handling
(cxl_event_trace_record).
In AMD Zen5 systems with Normalized Addressing, endpoint addresses are
not SPAs, and translation handlers are required for these features to
function correctly.
Now, as ACPI PRM translation could be expensive in tracing or error
handling code paths, do not yet enable translations to avoid its
intensive use. Instead, disable those features which are used only for
debugging and enhanced logging.
Introduce the flag CXL_REGION_F_NORMALIZED_ADDRESSING that indicates
Normalized Addressing for a region and use it to disable poison injection
and DPA to HPA conversion.
Note: Dropped unused CXL_DECODER_F_MASK macro.
[dj: Fix commit log CXL_REGION_F_NORM_ADDR to
CXL_REGION_F_NORMALIZED_ADDRESSING ]
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260114164837.1076338-14-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Poison injection setup code is embedded in cxl_region_probe(). For
improved encapsulation, readability, and maintainability, factor out
code into function cxl_region_setup_poison().
This patch is a prerequisite to disable poison by region offset for
Normalized Addressing.
No functional changes.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260114164837.1076338-13-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
The current kernel implementation does not support endpoint setup with
Normalized Addressing. It only translates an endpoint's DPA to the SPA
range of the host bridge. Therefore, the endpoint address range cannot
be determined, making a non-auto setup impossible. If a decoder
requires address translation, reprogramming should be disabled and the
decoder locked.
The BIOS, however, provides all the necessary address translation
data, which the kernel can use to reconfigure endpoint decoders with
normalized addresses. Locking the decoders in the BIOS would prevent a
capable kernel (or other operating systems) from shutting down
auto-generated regions and managing resources dynamically.
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Gregory Price <gourry@gourry.net>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>> ---
Link: https://patch.msgid.link/20260114164837.1076338-12-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Add AMD Zen5 support for address translation.
Zen5 systems may be configured to use 'Normalized addresses'. Then,
host physical addresses (HPA) are different from their system physical
addresses (SPA). The endpoint has its own physical address space and
an incoming HPA is already converted to the device's physical address
(DPA). Thus it has interleaving disabled and CXL endpoints are
programmed passthrough (DPA == HPA).
Host Physical Addresses (HPAs) need to be translated from the endpoint
to its CXL host bridge, esp. to identify the endpoint's root decoder
and region's address range. ACPI Platform Runtime Mechanism (PRM)
provides a handler to translate the DPA to its SPA. This is documented
in:
AMD Family 1Ah Models 00h–0Fh and Models 10h–1Fh
ACPI v6.5 Porting Guide, Publication # 58088
https://www.amd.com/en/search/documentation/hub.html
With Normalized Addressing this PRM handler must be used to translate
an HPA of an endpoint to its SPA.
Do the following to implement AMD Zen5 address translation:
Introduce a new file core/atl.c to handle ACPI PRM specific address
translation code. Naming is loosely related to the kernel's AMD
Address Translation Library (CONFIG_AMD_ATL) but implementation does
not depend on it, nor it is vendor specific. Use Kbuild and Kconfig
options respectively to enable the code depending on architecture and
platform options.
AMD Zen5 systems support the ACPI PRM CXL Address Translation firmware
call (see ACPI v6.5 Porting Guide, Address Translation - CXL DPA to
System Physical Address). Firmware enables the PRM handler if the
platform has address translation implemented. Check firmware and
kernel support of ACPI PRM using the specific GUID. On success enable
address translation by setting up the earlier introduced root port
callback, see function cxl_prm_setup_translation(). Setup is done in
cxl_setup_prm_address_translation(), it is the only function that
needs to be exported. For low level PRM firmware calls, use the ACPI
framework.
Identify the region's interleaving ways by inspecting the address
ranges. Also determine the interleaving granularity using the address
translation callback. Note that the position of the chunk from one
interleaving block to the next may vary and thus cannot be considered
constant. Address offsets larger than the interleaving block size
cannot be used to calculate the granularity. Thus, probe the
granularity using address translation for various HPAs in the same
interleaving block.
[ dj: Add atl.o build to cxl_test ]
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Tested-by: Gregory Price <gourry@gourry.net>
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://patch.msgid.link/20260114164837.1076338-11-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.19
A bunch more small fixes here, plus some more of the constant stream of
quirks. The most notable change here is Richard's change to the cs_dsp
code for the KUnit tests which is relatively large, mostly due to
boilerplate. The tests were triggering large numbers of error messages
as part of verifying that problems with input data are appropriately
detected which in turn caused runtime issues for the framework due to
the performance impact of pushing the logging out, while the logging is
valuable in normal operation it's basically useless while doing tests
designed to trigger it so rate limiting is an appropriate fix.
|
|
This test allows to test the various storage key handling functions.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add a new IOCTL to allow userspace to manipulate storage keys directly.
This will make it easier to write selftests related to storage keys.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
While userspace is allowed to have pages of any size, the new gmap
would always use 4k pages to back the guest.
Enable 1M pages for gmap.
This allows 1M pages to be used to back a guest when userspace is using
1M pages for the corresponding addresses (e.g. THP or hugetlbfs).
Remove the limitation that disallowed having nested guests and
hugepages at the same time.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Remove the PGSTE config option.
Remove all code from linux/s390 mm that involves PGSTEs.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Remove the now unused include/asm/gmap.h and mm/gmap.c files.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Switch KVM/s390 to use the new gmap code.
Remove includes to <gmap.h> and include "gmap.h" instead; fix all the
existing users of the old gmap functions to use the new ones instead.
Fix guest storage key access functions to work with the new gmap.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Refactor some storage key functions to improve readability.
Introduce helper functions that will be used in the next patches.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Switch to using IS_ENABLED(CONFIG_KVM) instead of CONFIG_PGSTE, since
the latter will be removed soon.
Many CONFIG_PGSTE are left behind, because they will be removed
completely in upcoming patches. The ones replaced here are mostly the
ones that will stay.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Implement gmap_protect_asce_top_level(), which was a stub. This
function was a stub due to cross dependencies with other patches.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add some helper functions for handling multiple guest faults at the
same time.
This will be needed for VSIE, where a nested guest access also needs to
access all the page tables that map it.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
New gmap (guest map) code. This new gmap code will only be used by KVM.
This will replace the existing gmap.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add page table management functions to be used for KVM guest (gmap)
page tables.
This patch adds functions to handle CMMA and the ESSA instruction.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add page table management functions to be used for KVM guest (gmap)
page tables.
This patch adds functions to handle memslot creation and destruction,
additional per-pagetable data stored in the PGSTEs, mapping physical
addresses into the gmap, and marking address ranges as prefix.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add page table management functions to be used for KVM guest (gmap)
page tables.
This patch adds functions related to storage key handling.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add page table management functions to be used for KVM guest (gmap)
page tables.
This patch adds functions to walk to specific table entries, or to
perform actions on a range of entries.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add page table management functions to be used for KVM guest (gmap)
page tables.
This patch adds functions to clear, replace or exchange DAT table
entries.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add page table management functions to be used for KVM guest (gmap)
page tables.
This patch adds the boilerplate and functions for the allocation and
deallocation of DAT tables.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add KVM-s390 specific bitfields and helper functions to manipulate DAT
tables.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Rename some functions in gaccess.c to add a _gva or _gpa suffix to
indicate whether the function accepts a virtual or a guest-absolute
address.
This makes it easier to understand the code.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Enable KVM_GENERIC_MMU_NOTIFIER, for now with empty placeholder callbacks.
Also enable KVM_MMU_LOCKLESS_AGING and define KVM_HAVE_MMU_RWLOCK.
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Pass the gmap explicitly as parameter, instead of just using
vsie_page->gmap.
This will be used in upcoming patches.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
If uv_convert_from_secure_pte() fails, the page becomes unusable by the
host. The failure can only occour in case of hardware malfunction or a
serious KVM bug.
When the unusable page is reused, the system can have issues and
hang.
Print a warning to aid debugging such unlikely scenarios.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Export __make_folio_secure() and s390_wiggle_split_folio(), as they will
be needed to be used by KVM.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Introduce import_lock to avoid future races when converting pages to
secure.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add gmap_helper_set_unused() to mark userspace ptes as unused.
Core mm code will use that information to discard unused pages instead
of attempting to swap them.
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Tested-by: Nico Boehr <nrb@linux.ibm.com>
Acked-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Move the sske_frame() function to asm/pgtable.h, so it can be used in
other modules too.
Opportunistically convert the .insn opcode specification to the
appropriate mnemonic.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
uv_destroy_folio() and uv_convert_from_secure_folio() should work on
all pages in the folio, not just the first one.
This was fine until now, but it will become a problem with upcoming
patches.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add P bit in hardware definition of region 3 and segment table entries.
Move union vaddress from kvm/gaccess.c to asm/dat_bits.h
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Move the pgste lock and unlock functions back into mm/pgtable.c and
duplicate them in mm/gmap_helpers.c to avoid function name collisions
later on.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
The three instances of CCI found on the QCS8300 are functionally the same
as on a number of existing Qualcomm SoCs.
Introduce a new SoC-specific compatible string "qcom,qcs8300-cci" with a
common fallback.
Signed-off-by: Nihal Kumar Gupta <quic_nihalkum@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260121183142.1867199-2-quic_nihalkum@quicinc.com
|
|
Restrict D3Cold disablement for BMG to unsupported NUC platforms,
instead of disabling it on all platforms.
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Fixes: 3e331a6715ee ("drm/xe/pm: Temporarily disable D3Cold on BMG")
Link: https://patch.msgid.link/20260123173238.1642383-1-karthik.poosa@intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 39125eaf8863ab09d70c4b493f58639b08d5a897)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Correct the function name in the kerneldoc.
It is for below warning:
"Warning: drivers/gpu/drm/xe/xe_tlb_inval_job.c:210 expecting prototype for
xe_tlb_inval_alloc_dep(). Prototype was for xe_tlb_inval_job_alloc_dep()
instead"
Fixes: 15366239e2130 ("drm/xe: Decouple TLB invalidations from GT")
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20260129233834.419977-8-shuicheng.lin@intel.com
(cherry picked from commit 9f9c117ac566cb567dd56cc5b7564c45653f7a2a)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Correct the function name in the kerneldoc.
It is for below warning:
"Warning: drivers/gpu/drm/xe/xe_tlb_inval.c:136 expecting prototype for
xe_gt_tlb_inval_init(). Prototype was for xe_gt_tlb_inval_init_early()
instead"
v2: add () for the function. (Michal)
Fixes: db16f9d90c1d9 ("drm/xe: Split TLB invalidation code in frontend and backend")
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20260129233834.419977-7-shuicheng.lin@intel.com
(cherry picked from commit 0651dbb9d6a72e99569576fbec4681fd8160d161)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
