Fix common misspellings

Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>

86 files changed, 118 insertions, 118 deletions

diff --git a/include/linux/amba/clcd.h b/include/linux/amba/clcd.h
index 24d26efd1432..e82e3ee2c54a 100644
--- a/include/linux/amba/clcd.h
+++ b/include/linux/amba/clcd.h
@@ -136,7 +136,7 @@ struct clcd_board {
 	int	(*check)(struct clcd_fb *fb, struct fb_var_screeninfo *var);
 
 	/*
-	 * Compulsary.  Decode fb->fb.var into regs->*.  In the case of
+	 * Compulsory.  Decode fb->fb.var into regs->*.  In the case of
 	 * fixed timing, set regs->* to the register values required.
 	 */
 	void	(*decode)(struct clcd_fb *fb, struct clcd_regs *regs);
diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h
index f60227088b7b..21114810c7c0 100644
--- a/include/linux/amba/mmci.h
+++ b/include/linux/amba/mmci.h
@@ -30,15 +30,15 @@ struct dma_chan;
  * @cd_invert: true if the gpio_cd pin value is active low
  * @capabilities: the capabilities of the block as implemented in
  * this platform, signify anything MMC_CAP_* from mmc/host.h
- * @dma_filter: function used to select an apropriate RX and TX
+ * @dma_filter: function used to select an appropriate RX and TX
  * DMA channel to be used for DMA, if and only if you're deploying the
  * generic DMA engine
  * @dma_rx_param: parameter passed to the DMA allocation
- * filter in order to select an apropriate RX channel. If
+ * filter in order to select an appropriate RX channel. If
  * there is a bidirectional RX+TX channel, then just specify
  * this and leave dma_tx_param set to NULL
  * @dma_tx_param: parameter passed to the DMA allocation
- * filter in order to select an apropriate TX channel. If this
+ * filter in order to select an appropriate TX channel. If this
  * is NULL the driver will attempt to use the RX channel as a
  * bidirectional channel
  */
diff --git a/include/linux/can/error.h b/include/linux/can/error.h
index d4127fd9e681..5958074302a4 100644
--- a/include/linux/can/error.h
+++ b/include/linux/can/error.h
@@ -51,7 +51,7 @@
 #define CAN_ERR_PROT_BIT1        0x10 /* unable to send recessive bit */
 #define CAN_ERR_PROT_OVERLOAD    0x20 /* bus overload */
 #define CAN_ERR_PROT_ACTIVE      0x40 /* active error announcement */
-#define CAN_ERR_PROT_TX          0x80 /* error occured on transmission */
+#define CAN_ERR_PROT_TX          0x80 /* error occurred on transmission */
 
 /* error in CAN protocol (location) / data[3] */
 #define CAN_ERR_PROT_LOC_UNSPEC  0x00 /* unspecified */
diff --git a/include/linux/can/netlink.h b/include/linux/can/netlink.h
index 3250de935e1a..34542d374dd8 100644
--- a/include/linux/can/netlink.h
+++ b/include/linux/can/netlink.h
@@ -17,7 +17,7 @@
 /*
  * CAN bit-timing parameters
  *
- * For futher information, please read chapter "8 BIT TIMING
+ * For further information, please read chapter "8 BIT TIMING
  * REQUIREMENTS" of the "Bosch CAN Specification version 2.0"
  * at http://www.semiconductors.bosch.de/pdf/can2spec.pdf.
  */
diff --git a/include/linux/cdk.h b/include/linux/cdk.h
index 0908daf7bf56..80093a8d4f64 100644
--- a/include/linux/cdk.h
+++ b/include/linux/cdk.h
@@ -149,7 +149,7 @@ typedef struct cdkhdr {
 /*
  *	Define the memory mapping structure. This structure is pointed to by
  *	the memp field in the stlcdkhdr struct. As many as these structures
- *	as required are layed out in shared memory to define how the rest of
+ *	as required are laid out in shared memory to define how the rest of
  *	shared memory is divided up. There will be one for each port.
  */
 typedef struct cdkmem {
diff --git a/include/linux/cfag12864b.h b/include/linux/cfag12864b.h
index 6f9f19d66591..b454dfce60d9 100644
--- a/include/linux/cfag12864b.h
+++ b/include/linux/cfag12864b.h
@@ -44,7 +44,7 @@ extern unsigned char * cfag12864b_buffer;
 /*
  * Get the refresh rate of the LCD
  *
- * Returns the refresh rate (hertzs).
+ * Returns the refresh rate (hertz).
  */
 extern unsigned int cfag12864b_getrate(void);
 
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index e654fa239916..5ac7ebc36dbb 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -240,7 +240,7 @@ struct cgroup {
 	/* For RCU-protected deletion */
 	struct rcu_head rcu_head;
 
-	/* List of events which userspace want to recieve */
+	/* List of events which userspace want to receive */
 	struct list_head event_list;
 	spinlock_t event_list_lock;
 };
diff --git a/include/linux/cm4000_cs.h b/include/linux/cm4000_cs.h
index 72bfefdbd767..3c4aac406175 100644
--- a/include/linux/cm4000_cs.h
+++ b/include/linux/cm4000_cs.h
@@ -20,7 +20,7 @@ typedef struct atreq {
 } atreq_t;
 
 
-/* what is particularly stupid in the original driver is the arch-dependant
+/* what is particularly stupid in the original driver is the arch-dependent
  * member sizes. This leads to CONFIG_COMPAT breakage, since 32bit userspace
  * will lay out the structure members differently than the 64bit kernel.
  *
diff --git a/include/linux/configfs.h b/include/linux/configfs.h
index ddb7a97c78c2..645778ad899b 100644
--- a/include/linux/configfs.h
+++ b/include/linux/configfs.h
@@ -218,7 +218,7 @@ static ssize_t _item##_attr_store(struct config_item *item,		\
  * group children.  default_groups may coexist alongsize make_group() or
  * make_item(), but if the group wishes to have only default_groups
  * children (disallowing mkdir(2)), it need not provide either function.
- * If the group has commit(), it supports pending and commited (active)
+ * If the group has commit(), it supports pending and committed (active)
  * items.
  */
 struct configfs_item_operations {
diff --git a/include/linux/cper.h b/include/linux/cper.h
index 372a25839fd1..c23049496531 100644
--- a/include/linux/cper.h
+++ b/include/linux/cper.h
@@ -310,7 +310,7 @@ struct cper_sec_proc_ia {
 	__u8	cpuid[48];
 };
 
-/* IA32/X64 Processor Error Infomation Structure */
+/* IA32/X64 Processor Error Information Structure */
 struct cper_ia_err_info {
 	uuid_le	err_type;
 	__u64	validation_bits;
diff --git a/include/linux/decompress/mm.h b/include/linux/decompress/mm.h
index 4cb72b920c74..7925bf0ee836 100644
--- a/include/linux/decompress/mm.h
+++ b/include/linux/decompress/mm.h
@@ -16,7 +16,7 @@
 
 /*
  * Some architectures want to ensure there is no local data in their
- * pre-boot environment, so that data can arbitarily relocated (via
+ * pre-boot environment, so that data can arbitrarily relocated (via
  * GOT references).  This is achieved by defining STATIC_RW_DATA to
  * be null.
  */
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 9bebd7f16ef1..eee7addec282 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -434,7 +434,7 @@ struct dma_tx_state {
  *	zero or error code
  * @device_tx_status: poll for transaction completion, the optional
  *	txstate parameter can be supplied with a pointer to get a
- *	struct with auxilary transfer status information, otherwise the call
+ *	struct with auxiliary transfer status information, otherwise the call
  *	will just return a simple status code
  * @device_issue_pending: push pending transactions to hardware
  */
diff --git a/include/linux/drbd.h b/include/linux/drbd.h
index d18d673ebc78..cec467f5d676 100644
--- a/include/linux/drbd.h
+++ b/include/linux/drbd.h
@@ -36,7 +36,7 @@
 #include <sys/wait.h>
 #include <limits.h>
 
-/* Altough the Linux source code makes a difference between
+/* Although the Linux source code makes a difference between
    generic endianness and the bitfields' endianness, there is no
    architecture as of Linux-2.6.24-rc4 where the bitfileds' endianness
    does not match the generic endianness. */
@@ -184,7 +184,7 @@ enum drbd_conns {
 	/* These temporal states are all used on the way
 	 * from >= C_CONNECTED to Unconnected.
 	 * The 'disconnect reason' states
-	 * I do not allow to change beween them. */
+	 * I do not allow to change between them. */
 	C_TIMEOUT,
 	C_BROKEN_PIPE,
 	C_NETWORK_FAILURE,
diff --git a/include/linux/drbd_limits.h b/include/linux/drbd_limits.h
index bb264a5732de..246f576c981d 100644
--- a/include/linux/drbd_limits.h
+++ b/include/linux/drbd_limits.h
@@ -43,7 +43,7 @@
 
 /* net { */
   /* timeout, unit centi seconds
-   * more than one minute timeout is not usefull */
+   * more than one minute timeout is not useful */
 #define DRBD_TIMEOUT_MIN 1
 #define DRBD_TIMEOUT_MAX 600
 #define DRBD_TIMEOUT_DEF 60       /* 6 seconds */
@@ -68,7 +68,7 @@
 #define DRBD_MAX_EPOCH_SIZE_MAX 20000
 #define DRBD_MAX_EPOCH_SIZE_DEF 2048
 
-  /* I don't think that a tcp send buffer of more than 10M is usefull */
+  /* I don't think that a tcp send buffer of more than 10M is useful */
 #define DRBD_SNDBUF_SIZE_MIN  0
 #define DRBD_SNDBUF_SIZE_MAX  (10<<20)
 #define DRBD_SNDBUF_SIZE_DEF  0
@@ -101,7 +101,7 @@
 #define DRBD_RATE_MAX (4 << 20)
 #define DRBD_RATE_DEF 250  /* kb/second */
 
-  /* less than 7 would hit performance unneccessarily.
+  /* less than 7 would hit performance unnecessarily.
    * 3833 is the largest prime that still does fit
    * into 64 sectors of activity log */
 #define DRBD_AL_EXTENTS_MIN  7
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index c8fcbdd2b0e7..dc80d8294247 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -614,7 +614,7 @@ struct ethtool_sfeatures {
  * values of corresponding bits in features[].requested. Bits in .requested
  * not set in .valid or not changeable are ignored.
  *
- * Returns %EINVAL when .valid contains undefined or never-changable bits
+ * Returns %EINVAL when .valid contains undefined or never-changeable bits
  * or size is not equal to required number of features words (32-bit blocks).
  * Returns >= 0 if request was completed; bits set in the value mean:
  *   %ETHTOOL_F_UNSUPPORTED - there were bits set in .valid that are not
diff --git a/include/linux/eventpoll.h b/include/linux/eventpoll.h
index f6856a5a1d4b..f362733186a5 100644
--- a/include/linux/eventpoll.h
+++ b/include/linux/eventpoll.h
@@ -1,5 +1,5 @@
 /*
- *  include/linux/eventpoll.h ( Efficent event polling implementation )
+ *  include/linux/eventpoll.h ( Efficient event polling implementation )
  *  Copyright (C) 2001,...,2006	 Davide Libenzi
  *
  *  This program is free software; you can redistribute it and/or modify
diff --git a/include/linux/exportfs.h b/include/linux/exportfs.h
index 33a42f24b275..3a4cef5322dc 100644
--- a/include/linux/exportfs.h
+++ b/include/linux/exportfs.h
@@ -120,7 +120,7 @@ struct fid {
  * encode_fh:
  *    @encode_fh should store in the file handle fragment @fh (using at most
  *    @max_len bytes) information that can be used by @decode_fh to recover the
- *    file refered to by the &struct dentry @de.  If the @connectable flag is
+ *    file referred to by the &struct dentry @de.  If the @connectable flag is
  *    set, the encode_fh() should store sufficient information so that a good
  *    attempt can be made to find not only the file but also it's place in the
  *    filesystem.   This typically means storing a reference to de->d_parent in
diff --git a/include/linux/fb.h b/include/linux/fb.h
index b2a36391d2a1..df728c1c29ed 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -534,14 +534,14 @@ struct fb_cursor_user {
 #define FB_EVENT_GET_CONSOLE_MAP        0x07
 /*      CONSOLE-SPECIFIC: set console to framebuffer mapping */
 #define FB_EVENT_SET_CONSOLE_MAP        0x08
-/*      A hardware display blank change occured */
+/*      A hardware display blank change occurred */
 #define FB_EVENT_BLANK                  0x09
 /*      Private modelist is to be replaced */
 #define FB_EVENT_NEW_MODELIST           0x0A
 /*	The resolution of the passed in fb_info about to change and
         all vc's should be changed         */
 #define FB_EVENT_MODE_CHANGE_ALL	0x0B
-/*	A software display blank change occured */
+/*	A software display blank change occurred */
 #define FB_EVENT_CONBLANK               0x0C
 /*      Get drawing requirements        */
 #define FB_EVENT_GET_REQ                0x0D
@@ -805,7 +805,7 @@ struct fb_tile_ops {
 /* A driver may set this flag to indicate that it does want a set_par to be
  * called every time when fbcon_switch is executed. The advantage is that with
  * this flag set you can really be sure that set_par is always called before
- * any of the functions dependant on the correct hardware state or altering
+