Merge branch 'next' into for-linus

10 files changed, 453 insertions, 1695 deletions

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index f0d90172a65f..f9cf0881b0e3 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -294,24 +294,6 @@ config INPUT_SGI_BTNS
 	  To compile this driver as a module, choose M here: the
 	  module will be called sgi_btns.
 
-config INPUT_WINBOND_CIR
-	tristate "Winbond IR remote control"
-	depends on X86 && PNP
-	select NEW_LEDS
-	select LEDS_CLASS
-	select LEDS_TRIGGERS
-	select BITREVERSE
-	help
-	  Say Y here if you want to use the IR remote functionality found
-	  in some Winbond SuperI/O chips. Currently only the WPCD376I
-	  chip is supported (included in some Intel Media series motherboards).
-
-	  IR Receive and wake-on-IR from suspend and power-off is currently
-	  supported.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called winbond_cir.
-
 config HP_SDC_RTC
 	tristate "HP SDC Real Time Clock"
 	depends on (GSC || HP300) && SERIO
@@ -472,4 +454,17 @@ config INPUT_CMA3000_I2C
 	  To compile this driver as a module, choose M here: the
 	  module will be called cma3000_d0x_i2c.
 
+config INPUT_XEN_KBDDEV_FRONTEND
+	tristate "Xen virtual keyboard and mouse support"
+	depends on XEN_FBDEV_FRONTEND
+	default y
+	select XEN_XENBUS_FRONTEND
+	help
+	  This driver implements the front-end of the Xen virtual
+	  keyboard and mouse device driver.  It communicates with a back-end
+	  in another domain.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called xen-kbdfront.
+
 endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 35bcfe46555e..e3f7984e6274 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -40,8 +40,8 @@ obj-$(CONFIG_INPUT_SPARCSPKR)		+= sparcspkr.o
 obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON)	+= twl4030-pwrbutton.o
 obj-$(CONFIG_INPUT_TWL4030_VIBRA)	+= twl4030-vibra.o
 obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o
-obj-$(CONFIG_INPUT_WINBOND_CIR)		+= winbond-cir.o
 obj-$(CONFIG_INPUT_WISTRON_BTNS)	+= wistron_btns.o
 obj-$(CONFIG_INPUT_WM831X_ON)		+= wm831x-on.o
+obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND)	+= xen-kbdfront.o
 obj-$(CONFIG_INPUT_YEALINK)		+= yealink.o
 
diff --git a/drivers/input/misc/ad714x-i2c.c b/drivers/input/misc/ad714x-i2c.c
index 2bef8fa56c94..e21deb1baa8a 100644
--- a/drivers/input/misc/ad714x-i2c.c
+++ b/drivers/input/misc/ad714x-i2c.c
@@ -10,23 +10,23 @@
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/types.h>
+#include <linux/pm.h>
 #include "ad714x.h"
 
 #ifdef CONFIG_PM
-static int ad714x_i2c_suspend(struct i2c_client *client, pm_message_t message)
+static int ad714x_i2c_suspend(struct device *dev)
 {
-	return ad714x_disable(i2c_get_clientdata(client));
+	return ad714x_disable(i2c_get_clientdata(to_i2c_client(dev)));
 }
 
-static int ad714x_i2c_resume(struct i2c_client *client)
+static int ad714x_i2c_resume(struct device *dev)
 {
-	return ad714x_enable(i2c_get_clientdata(client));
+	return ad714x_enable(i2c_get_clientdata(to_i2c_client(dev)));
 }
-#else
-# define ad714x_i2c_suspend NULL
-# define ad714x_i2c_resume  NULL
 #endif
 
+static SIMPLE_DEV_PM_OPS(ad714x_i2c_pm, ad714x_i2c_suspend, ad714x_i2c_resume);
+
 static int ad714x_i2c_write(struct device *dev, unsigned short reg,
 				unsigned short data)
 {
@@ -114,11 +114,10 @@ MODULE_DEVICE_TABLE(i2c, ad714x_id);
 static struct i2c_driver ad714x_i2c_driver = {
 	.driver = {
 		.name = "ad714x_captouch",
+		.pm   = &ad714x_i2c_pm,
 	},
 	.probe    = ad714x_i2c_probe,
 	.remove   = __devexit_p(ad714x_i2c_remove),
-	.suspend  = ad714x_i2c_suspend,
-	.resume	  = ad714x_i2c_resume,
 	.id_table = ad714x_id,
 };
 
diff --git a/drivers/input/misc/ad714x-spi.c b/drivers/input/misc/ad714x-spi.c
index 7f8dedfd1bfe..4120dd549305 100644
--- a/drivers/input/misc/ad714x-spi.c
+++ b/drivers/input/misc/ad714x-spi.c
@@ -9,6 +9,7 @@
 #include <linux/input.h>	/* BUS_I2C */
 #include <linux/module.h>
 #include <linux/spi/spi.h>
+#include <linux/pm.h>
 #include <linux/types.h>
 #include "ad714x.h"
 
@@ -16,20 +17,19 @@
 #define AD714x_SPI_READ            BIT(10)
 
 #ifdef CONFIG_PM
-static int ad714x_spi_suspend(struct spi_device *spi, pm_message_t message)
+static int ad714x_spi_suspend(struct device *dev)
 {
-	return ad714x_disable(spi_get_drvdata(spi));
+	return ad714x_disable(spi_get_drvdata(to_spi_device(dev)));
 }
 
-static int ad714x_spi_resume(struct spi_device *spi)
+static int ad714x_spi_resume(struct device *dev)
 {
-	return ad714x_enable(spi_get_drvdata(spi));
+	return ad714x_enable(spi_get_drvdata(to_spi_device(dev)));
 }
-#else
-# define ad714x_spi_suspend NULL
-# define ad714x_spi_resume  NULL
 #endif
 
+static SIMPLE_DEV_PM_OPS(ad714x_spi_pm, ad714x_spi_suspend, ad714x_spi_resume);
+
 static int ad714x_spi_read(struct device *dev, unsigned short reg,
 		unsigned short *data)
 {
@@ -79,11 +79,10 @@ static struct spi_driver ad714x_spi_driver = {
 	.driver = {
 		.name	= "ad714x_captouch",
 		.owner	= THIS_MODULE,
+		.pm	= &ad714x_spi_pm,
 	},
 	.probe		= ad714x_spi_probe,
 	.remove		= __devexit_p(ad714x_spi_remove),
-	.suspend	= ad714x_spi_suspend,
-	.resume		= ad714x_spi_resume,
 };
 
 static __init int ad714x_spi_init(void)
diff --git a/drivers/input/misc/adxl34x-i2c.c b/drivers/input/misc/adxl34x-i2c.c
index 0779724af7e7..ccacf2bb06a4 100644
--- a/drivers/input/misc/adxl34x-i2c.c
+++ b/drivers/input/misc/adxl34x-i2c.c
@@ -11,6 +11,7 @@
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/types.h>
+#include <linux/pm.h>
 #include "adxl34x.h"
 
 static int adxl34x_smbus_read(struct device *dev, unsigned char reg)
@@ -105,8 +106,9 @@ static int __devexit adxl34x_i2c_remove(struct i2c_client *client)
 }
 
 #ifdef CONFIG_PM
-static int adxl34x_i2c_suspend(struct i2c_client *client, pm_message_t message)
+static int adxl34x_i2c_suspend(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
 	struct adxl34x *ac = i2c_get_clientdata(client);
 
 	adxl34x_suspend(ac);
@@ -114,19 +116,20 @@ static int adxl34x_i2c_suspend(struct i2c_client *client, pm_message_t message)
 	return 0;
 }
 
-static int adxl34x_i2c_resume(struct i2c_client *client)
+static int adxl34x_i2c_resume(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
 	struct adxl34x *ac = i2c_get_clientdata(client);
 
 	adxl34x_resume(ac);
 
 	return 0;
 }
-#else
-# define adxl34x_i2c_suspend NULL
-# define adxl34x_i2c_resume  NULL
 #endif
 
+static SIMPLE_DEV_PM_OPS(adxl34x_i2c_pm, adxl34x_i2c_suspend,
+			 adxl34x_i2c_resume);
+
 static const struct i2c_device_id adxl34x_id[] = {
 	{ "adxl34x", 0 },
 	{ }
@@ -138,11 +141,10 @@ static struct i2c_driver adxl34x_driver = {
 	.driver = {
 		.name = "adxl34x",
 		.owner = THIS_MODULE,
+		.pm = &adxl34x_i2c_pm,
 	},
 	.probe    = adxl34x_i2c_probe,
 	.remove   = __devexit_p(adxl34x_i2c_remove),
-	.suspend  = adxl34x_i2c_suspend,
-	.resume   = adxl34x_i2c_resume,
 	.id_table = adxl34x_id,
 };
 
diff --git a/drivers/input/misc/adxl34x-spi.c b/drivers/input/misc/adxl34x-spi.c
index 782de9e89828..f29de22fdda0 100644
--- a/drivers/input/misc/adxl34x-spi.c
+++ b/drivers/input/misc/adxl34x-spi.c
@@ -10,6 +10,7 @@
 #include <linux/input.h>	/* BUS_SPI */
 #include <linux/module.h>
 #include <linux/spi/spi.h>
+#include <linux/pm.h>
 #include <linux/types.h>
 #include "adxl34x.h"
 
@@ -57,7 +58,7 @@ static int adxl34x_spi_read_block(struct device *dev,
 	return (status < 0) ? status : 0;
 }
 
-static const struct adxl34x_bus_ops adx134x_spi_bops = {
+static const struct adxl34x_bus_ops adxl34x_spi_bops = {
 	.bustype	= BUS_SPI,
 	.write		= adxl34x_spi_write,
 	.read		= adxl34x_spi_read,
@@ -76,7 +77,7 @@ static int __devinit adxl34x_spi_probe(struct spi_device *spi)
 
 	ac = adxl34x_probe(&spi->dev, spi->irq,
 			   spi->max_speed_hz > MAX_FREQ_NO_FIFODELAY,
-			   &adx134x_spi_bops);
+			   &adxl34x_spi_bops);
 
 	if (IS_ERR(ac))
 		return PTR_ERR(ac);
@@ -94,8 +95,9 @@ static int __devexit adxl34x_spi_remove(struct spi_device *spi)
 }
 
 #ifdef CONFIG_PM
-static int adxl34x_spi_suspend(struct spi_device *spi, pm_message_t message)
+static int adxl34x_spi_suspend(struct device *dev)
 {
+	struct spi_device *spi = to_spi_device(dev);
 	struct adxl34x *ac = dev_get_drvdata(&spi->dev);
 
 	adxl34x_suspend(ac);
@@ -103,29 +105,29 @@ static int adxl34x_spi_suspend(struct spi_device *spi, pm_message_t message)
 	return 0;
 }
 
-static int adxl34x_spi_resume(struct spi_device *spi)
+static int adxl34x_spi_resume(struct device *dev)
 {
+	struct spi_device *spi = to_spi_device(dev);
 	struct adxl34x *ac = dev_get_drvdata(&spi->dev);
 
 	adxl34x_resume(ac);
 
 	return 0;
 }
-#else
-# define adxl34x_spi_suspend NULL
-# define adxl34x_spi_resume  NULL
 #endif
 
+static SIMPLE_DEV_PM_OPS(adxl34x_spi_pm, adxl34x_spi_suspend,
+			 adxl34x_spi_resume);
+
 static struct spi_driver adxl34x_driver = {
 	.driver = {
 		.name = "adxl34x",
 		.bus = &spi_bus_type,
 		.owner = THIS_MODULE,
+		.pm = &adxl34x_spi_pm,
 	},
 	.probe   = adxl34x_spi_probe,
 	.remove  = __devexit_p(adxl34x_spi_remove),
-	.suspend = adxl34x_spi_suspend,
-	.resume  = adxl34x_spi_resume,
 };
 
 static int __init adxl34x_spi_init(void)
diff --git a/drivers/input/misc/ati_remote2.c b/drivers/input/misc/ati_remote2.c
index 0b0e9be63542..9ccdb82d869a 100644
--- a/drivers/input/misc/ati_remote2.c
+++ b/drivers/input/misc/ati_remote2.c
@@ -612,8 +612,8 @@ static int ati_remote2_input_init(struct ati_remote2 *ar2)
 	idev->open = ati_remote2_open;
 	idev->close = ati_remote2_close;
 
-	idev->getkeycode_new = ati_remote2_getkeycode;
-	idev->setkeycode_new = ati_remote2_setkeycode;
+	idev->getkeycode = ati_remote2_getkeycode;
+	idev->setkeycode = ati_remote2_setkeycode;
 
 	idev->name = ar2->name;
 	idev->phys = ar2->phys;
diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
index 82542a1c1098..364bdf43a381 100644
--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -347,8 +347,7 @@ static int uinput_setup_device(struct uinput_device *udev, const char __user *bu
 {
 	struct uinput_user_dev	*user_dev;
 	struct input_dev	*dev;
-	char			*name;
-	int			i, size;
+	int			i;
 	int			retval;
 
 	if (count != sizeof(struct uinput_user_dev))
@@ -362,30 +361,25 @@ static int uinput_setup_device(struct uinput_device *udev, const char __user *bu
 
 	dev = udev->dev;
 
-	user_dev = kmalloc(sizeof(struct uinput_user_dev), GFP_KERNEL);
-	if (!user_dev)
-		return -ENOMEM;
-
-	if (copy_from_user(user_dev, buffer, sizeof(struct uinput_user_dev))) {
-		retval = -EFAULT;
-		goto exit;
-	}
+	user_dev = memdup_user(buffer, sizeof(struct uinput_user_dev));
+	if (IS_ERR(user_dev))
+		return PTR_ERR(user_dev);
 
 	udev->ff_effects_max = user_dev->ff_effects_max;
 
-	size = strnlen(user_dev->name, UINPUT_MAX_NAME_SIZE) + 1;
-	if (!size) {
+	/* Ensure name is filled in */
+	if (!user_dev->name[0]) {
 		retval = -EINVAL;
 		goto exit;
 	}
 
 	kfree(dev->name);
-	dev->name = name = kmalloc(size, GFP_KERNEL);
-	if (!name) {
+	dev->name = kstrndup(user_dev->name, UINPUT_MAX_NAME_SIZE,
+			     GFP_KERNEL);
+	if (!dev->name) {
 		retval = -ENOMEM;
 		goto exit;
 	}
-	strlcpy(name, user_dev->name, size);
 
 	dev->id.bustype	= user_dev->id.bustype;
 	dev->id.vendor	= user_dev->id.vendor;
@@ -622,7 +616,6 @@ static long uinput_ioctl_handler(struct file *file, unsigned int cmd,
 	struct uinput_ff_upload ff_up;
 	struct uinput_ff_erase  ff_erase;
 	struct uinput_request   *req;
-	int                     length;
 	char			*phys;
 
 	retval = mutex_lock_interruptible(&udev->mutex);
@@ -689,24 +682,15 @@ static long uinput_ioctl_handler(struct file *file, unsigned int cmd,
 				retval = -EINVAL;
 				goto out;
 			}
-			length = strnlen_user(p, 1024);
-			if (length <= 0) {
-				retval = -EFAULT;
-				break;
+
+			phys = strndup_user(p, 1024);
+			if (IS_ERR(phys)) {
+				retval = PTR_ERR(phys);
+				goto out;
 			}
+
 			kfree(udev->dev->phys);
-			udev->dev->phys = phys = kmalloc(length, GFP_KERNEL);
-			if (!phys) {
-				retval = -ENOMEM;
-				break;
-			}
-			if (copy_from_user(phys, p, length)) {
-				udev->dev->phys = NULL;
-				kfree(phys);
-				retval = -EFAULT;
-				break;
-			}
-			phys[length - 1] = '\0';
+			udev->dev->phys = phys;
 			break;
 
 		case UI_BEGIN_FF_UPLOAD:
diff --git a/drivers/input/misc/winbond-cir.c b/drivers/input/misc/winbond-cir.c
deleted file mode 100644
index 64f1de7960c6..000000000000
--- a/drivers/input/misc/winbond-cir.c
+++ /dev/null
@@ -1,1608 +0,0 @@
-/*
- *  winbond-cir.c - Driver for the Consumer IR functionality of Winbond
- *                  SuperI/O chips.
- *
- *  Currently supports the Winbond WPCD376i chip (PNP id WEC1022), but
- *  could probably support others (Winbond WEC102X, NatSemi, etc)
- *  with minor modifications.
- *
- *  Original Author: David Härdeman <david@hardeman.nu>
- *     Copyright (C) 2009 David Härdeman <david@hardeman.nu>
- *
- *  Dedicated to Matilda, my newborn daughter, without whose loving attention
- *  this driver would have been finished in half the time and with a fraction
- *  of the bugs.
- *
- *  Written using:
- *    o Winbond WPCD376I datasheet helpfully provided by Jesse Barnes at Intel
- *    o NatSemi PC87338/PC97338 datasheet (for the serial port stuff)
- *    o DSDT dumps
- *
- *  Supported features:
- *    o RC6
- *    o Wake-On-CIR functionality
- *
- *  To do:
- *    o Test NEC and RC5
- *
- *  Left as an exercise for the reader:
- *    o Learning (I have neither the hardware, nor the need)
- *    o IR Transmit (ibid)
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/pnp.h>
-#include <linux/interrupt.h>
-#include <linux/timer.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <linux/pci_ids.h>
-#include <linux/io.h>
-#include <linux/bitrev.h>
-#include <linux/bitops.h>
-#include <linux/slab.h>
-
-#define DRVNAME "winbond-cir"
-
-/* CEIR Wake-Up Registers, relative to data->wbase                      */
-#define WBCIR_REG_WCEIR_CTL	0x03 /* CEIR Receiver Control		*/
-#define WBCIR_REG_WCEIR_STS	0x04 /* CEIR Receiver Status		*/
-#define WBCIR_REG_WCEIR_EV_EN	0x05 /* CEIR Receiver Event Enable	*/
-#define WBCIR_REG_WCEIR_CNTL	0x06 /* CEIR Receiver Counter Low	*/
-#define WBCIR_REG_WCEIR_CNTH	0x07 /* CEIR Receiver Counter High	*/
-#define WBCIR_REG_WCEIR_INDEX	0x08 /* CEIR Receiver Index		*/
-#define WBCIR_REG_WCEIR_DATA	0x09 /* CEIR Receiver Data		*/
-#define WBCIR_REG_WCEIR_CSL	0x0A /* CEIR Re. Compare Strlen		*/
-#define WBCIR_REG_WCEIR_CFG1	0x0B /* CEIR Re. Configuration 1	*/
-#define WBCIR_REG_WCEIR_CFG2	0x0C /* CEIR Re. Configuration 2	*/
-
-/* CEIR Enhanced Functionality Registers, relative to data->ebase       */
-#define WBCIR_REG_ECEIR_CTS	0x00 /* Enhanced IR Control Status	*/
-#define WBCIR_REG_ECEIR_CCTL	0x01 /* Infrared Counter Control	*/
-#define WBCIR_REG_ECEIR_CNT_LO	0x02 /* Infrared Counter LSB		*/
-#define WBCIR_REG_ECEIR_CNT_HI	0x03 /* Infrared Counter MSB		*/
-#define WBCIR_REG_ECEIR_IREM	0x04 /* Infrared Emitter Status		*/
-
-/* SP3 Banked Registers, relative to data->sbase                        */
-#define WBCIR_REG_SP3_BSR	0x03 /* Bank Select, all banks		*/
-				      /* Bank 0				*/
-#define WBCIR_REG_SP3_RXDATA	0x00 /* FIFO RX data (r)		*/
-#define WBCIR_REG_SP3_TXDATA	0x00 /* FIFO TX data (w)		*/
-#define WBCIR_REG_SP3_IER	0x01 /* Interrupt Enable		*/
-#define WBCIR_REG_SP3_EIR	0x02 /* Event Identification (r)	*/
-#define WBCIR_REG_SP3_FCR	0x02 /* FIFO Control (w)		*/
-#define WBCIR_REG_SP3_MCR	0x04 /* Mode Control			*/
-#define WBCIR_REG_SP3_LSR	0x05 /* Link Status			*/
-#define WBCIR_REG_SP3_MSR	0x06 /* Modem Status			*/
-#define WBCIR_REG_SP3_ASCR	0x07 /* Aux Status and Control		*/
-				      /* Bank 2				*/
-#define WBCIR_REG_SP3_BGDL	0x00 /* Baud Divisor LSB		*/
-#define WBCIR_REG_SP3_BGDH	0x01 /* Baud Divisor MSB		*/
-#define WBCIR_REG_SP3_EXCR1	0x02 /* Extended Control 1		*/
-#define WBCIR_REG_SP3_EXCR2	0x04 /* Extended Control 2		*/
-#define WBCIR_REG_SP3_TXFLV	0x06 /* TX FIFO Level			*/
-#define WBCIR_REG_SP3_RXFLV	0x07 /* RX FIFO Level			*/
-				      /* Bank 3				*/
-#define WBCIR_REG_SP3_MRID	0x00 /* Module Identification		*/
-#define WBCIR_REG_SP3_SH_LCR	0x01 /* LCR Shadow			*/
-#define WBCIR_REG_SP3_SH_FCR	0x02 /* FCR Shadow			*/
-				      /* Bank 4				*/
-#define WBCIR_REG_SP3_IRCR1	0x02 /* Infrared Control 1		*/
-				      /* Bank 5				*/
-#define WBCIR_REG_SP3_IRCR2	0x04 /* Infrared Control 2		*/
-				      /* Bank 6				*/
-#define WBCIR_REG_SP3_IRCR3	0x00 /* Infrared Control 3		*/
-#define WBCIR_REG_SP3_SIR_PW	0x02 /* SIR Pulse Width		*/
-				      /* Bank 7				*/
-#define WBCIR_REG_SP3_IRRXDC	0x00 /* IR RX Demod Control		*/
-#define WBCIR_REG_SP3_IRTXMC	0x01 /* IR TX Mod Control		*/
-#define WBCIR_REG_SP3_RCCFG	0x02 /* CEIR Config			*/
-#define WBCIR_REG_SP3_IRCFG1	0x04 /* Infrared Config 1		*/
-#define WBCIR_REG_SP3_IRCFG4	0x07 /* Infrared Config 4		*/
-
-/*
- * Magic values follow
- */
-
-/* No interrupts for WBCIR_REG_SP3_IER and WBCIR_REG_SP3_EIR */
-#define WBCIR_IRQ_NONE		0x00
-/* RX data bit for WBCIR_REG_SP3_IER and WBCIR_REG_SP3_EIR */
-#define WBCIR_IRQ_RX		0x01
-/* Over/Under-flow bit for WBCIR_REG_SP3_IER and WBCIR_REG_SP3_EIR */
-#define WBCIR_IRQ_ERR		0x04
-/* Led enable/disable bit for WBCIR_REG_ECEIR_CTS */
-#define WBCIR_LED_ENABLE	0x80
-/* RX data available bit for WBCIR_REG_SP3_LSR */
-#define WBCIR_RX_AVAIL		0x01
-/* RX disable bit for WBCIR_REG_SP3_ASCR */
-#define WBCIR_RX_DISABLE	0x20
-/* Extended mode enable bit for WBCIR_REG_SP3_EXCR1 */
-#define WBCIR_EXT_ENABLE	0x01
-/* Select compare register in WBCIR_REG_WCEIR_INDEX (bits 5 & 6) */
-#define WBCIR_REGSEL_COMPARE	0x10
-/* Select mask register in WBCIR_REG_WCEIR_INDEX (bits 5 & 6) */
-#define WBCIR_REGSEL_MASK	0x20
-/* Starting address of selected register in WBCIR_REG_WCEIR_INDEX */
-#define WBCIR_REG_ADDR0		0x00
-
-/* Valid banks for the SP3 UART */
-enum wbcir_bank {
-	WBCIR_BANK_0          = 0x00,
-	WBCIR_BANK_1          = 0x80,
-	WBCIR_BANK_2          = 0xE0,
-	WBCIR_BANK_3          = 0xE4,
-	WBCIR_BANK_4          = 0xE8,
-	WBCIR_BANK_5          = 0xEC,
-	WBCIR_BANK_6          = 0xF0,
-	WBCIR_BANK_7          = 0xF4,
-};
-
-/* Supported IR Protocols */
-enum wbcir_protocol {
-	IR_PROTOCOL_RC5          = 0x0,
-	IR_PROTOCOL_NEC          = 0x1,
-	IR_PROTOCOL_RC6          = 0x2,
-};
-
-/* Misc */
-#define WBCIR_NAME	"Winbond CIR"
-#define WBCIR_ID_FAMILY          0xF1 /* Family ID for the WPCD376I	*/
-#define	WBCIR_ID_CHIP            0x04 /* Chip ID for the WPCD376I	*/
-#define IR_KEYPRESS_TIMEOUT       250 /* FIXME: should be per-protocol? */
-#define INVALID_SCANCODE   0x7FFFFFFF /* Invalid with all protos	*/
-#define WAKEUP_IOMEM_LEN         0x10 /* Wake-Up I/O Reg Len		*/
-#define EHFUNC_IOMEM_LEN         0x10 /* Enhanced Func I/O Reg Len	*/
-#define SP_IOMEM_LEN             0x08 /* Serial Port 3 (IR) Reg Len	*/
-#define WBCIR_MAX_IDLE_BYTES       10
-
-static DEFINE_SPINLOCK(wbcir_lock);
-static DEFINE_RWLOCK(keytable_lock);
-
-struct wbcir_key {
-	u32 scancode;
-	unsigned int keycode;
-};
-
-struct wbcir_keyentry {
-	struct wbcir_key key;
-	struct list_head list;
-};
-
-static struct wbcir_key rc6_def_keymap[] = {
-	{ 0x800F0400, KEY_NUMERIC_0		},
-	{ 0x800F0401, KEY_NUMERIC_1		},
-	{ 0x800F0402, KEY_NUMERIC_2		},
-	{ 0x800F0403, KEY_NUMERIC_3		},
-	{ 0x800F0404, KEY_NUMERIC_4		},
-	{ 0x800F0405, KEY_NUMERIC_5		},
-	{ 0x800F0406, KEY_NUMERIC_6		},
-	{ 0x800F0407, KEY_NUMERIC_7		},
-	{ 0x800F0408, KEY_NUMERIC_8		},
-	{ 0x800F0409, KEY_NUMERIC_9		},
-	{ 0x800F041D, KEY_NUMERIC_STAR		},
-	{ 0x800F041C, KEY_NUMERIC_POUND		},
-	{ 0x800F0410, KEY_VOLUMEUP		},
-	{ 0x800F0411, KEY_VOLUMEDOWN		},
-	{ 0x800F0412, KEY_CHANNELUP		},
-	{ 0x800F0413, KEY_CHANNELDOWN		},
-	{ 0x800F040E, KEY_MUTE			},
-	{ 0x800F040D, KEY_VENDOR		}, /* Vista Logo Key */
-	{ 0x800F041E, KEY_UP			},
-	{ 0x800F041F, KEY_DOWN			},
-	{ 0x800F0420, KEY_LEFT			},
-	{ 0x800F0421, KEY_RIGHT			},
-	{ 0x800F0422, KEY_OK			},
-	{ 0x800F0423, KEY_ESC			},
-	{ 0x800F040F, KEY_INFO			},
-	{ 0x800F040A, KEY_CLEAR			},
-	{ 0x800F040B, KEY_ENTER			},
-	{ 0x800F045B, KEY_RED			},
-	{ 0x800F045C, KEY_GREEN			},
-	{ 0x800F045D, KEY_YELLOW		},
-	{ 0x800F045E, KEY_BLUE			},
-	{ 0x800F045A, KEY_TEXT			},
-	{ 0x800F0427, KEY_SWITCHVIDEOMODE	},
-	{ 0x800F040C, KEY_POWER			},
-	{ 0x800F0450, KEY_RADIO			},
-	{ 0x800F0448, KEY_PVR			},
-	{ 0x800F0447, KEY_AUDIO			},
-	{ 0x800F0426, KEY_EPG			},
-	{ 0x800F0449, KEY_CAMERA		},
-	{ 0x800F0425, KEY_TV			},
-	{ 0x800F044A, KEY_VIDEO			},
-	{ 0x800F0424, KEY_DVD			},
-	{ 0x800F0416, KEY_PLAY			},
-	{ 0x800F0418, KEY_PAUSE			},
-	{ 0x800F0419, KEY_STOP			},
-	{ 0x800F0414, KEY_FASTFORWARD		},
-	{ 0x800F041A, KEY_NEXT			},
-	{ 0x800F041B, KEY_PREVIOUS		},
-	{ 0x800F0415, KEY_REWIND		},
-	{ 0x800F0417, KEY_RECORD		},
-};
-
-/* Registers and other state is protected by wbcir_lock */
-struct wbcir_data {
-	unsigned long wbase;        /* Wake-Up Baseaddr		*/
-	unsigned long ebase;        /* Enhanced Func. Baseaddr	*/
-	unsigned long sbase;        /* Serial Port Baseaddr	*/
-	unsigned int  irq;          /* Serial Port IRQ		*/
-
-	struct input_dev *input_dev;
-	struct timer_list timer_keyup;
-	struct led_trigger *rxtrigger;
-	struct led_trigger *txtrigger;
-	struct led_classdev led;
-
-	u32 last_scancode;
-	unsigned int last_keycode;
-	u8 last_toggle;
-	u8 keypressed;
-	unsigned long keyup_jiffies;
-	unsigned int idle_count;
-
-	/* RX irdata and parsing state */
-	unsigned long irdata[30];
-	unsigned int irdata_count;
-	unsigned int irdata_idle;
-	unsigned int irdata_off;
-	unsigned int irdata_error;
-
-	/* Protected by keytable_lock */
-	struct list_head keytable;
-};
-
-static enum wbcir_protocol protocol = IR_PROTOCOL_RC6;
-module_param(protocol, uint, 0444);
-MODULE_PARM_DESC(protocol, "IR protocol to use "
-		 "(0 = RC5, 1 = NEC, 2 = RC6A, default)");
-
-static int invert; /* default = 0 */
-module_param(invert, bool, 0444);
-MODULE_PARM_DESC(invert, "Invert the signal from the IR receiver");
-
-static unsigned int wake_sc = 0x800F040C;
-module_param(wake_sc, uint, 0644);
-MODULE_PARM_DESC(wake_sc, "Scancode of the power-on IR command");
-
-static unsigned int wake_rc6mode = 6;
-module_param(wake_rc6mode, uint, 0644);
-MODULE_PARM_DESC(wake_rc6mode, "RC6 mode for the power-on command "
-		 "(0 = 0, 6 = 6A, default)");
-
-
-
-/*****************************************************************************
- *
- * UTILITY FUNCTIONS
- *
- *****************************************************************************/
-
-/* Caller needs to hold wbcir_lock */
-static void
-wbcir_set_bits(unsigned long addr, u8 bits, u8 mask)
-{
-	u8 val;
-
-	val = inb(addr);
-	val = ((val & ~mask) | (bits & mask));
-	outb(val, addr);
-}
-
-/* Selects the register bank for the serial port */
-static inline void
-wbcir_select_bank(struct wbcir_data *data, enum wbcir_bank bank)
-{
-	outb(bank, data->sbase + WBCIR_REG_SP3_BSR);
-}
-
-static enum led_brightness
-wbcir_led_brightness_get(struct led_classdev *led_cdev)
-{
-	struct wbcir_data *data = container_of(led_cdev,
-					       struct wbcir_data,
-					       led);
-
-	if (inb(data->ebase + WBCIR_REG_ECEIR_CTS) & WBCIR_LED_ENABLE)
-		return LED_FULL;
-	else
-		return LED_OFF;
-}
-
-static void
-wbcir_led_brightness_set(struct led_classdev *led_cdev,
-			    enum led_brightness brightness)
-{
-	struct wbcir_data *data = container_of(led_cdev,
-					       struct wbcir_data,
-					       led);
-
-	wbcir_set_bits(data->ebase + WBCIR_REG_ECEIR_CTS,
-		       brightness == LED_OFF ? 0x00 : WBCIR_LED_ENABLE,
-		       WBCIR_LED_ENABLE);
-}
-
-/* Manchester encodes bits to RC6 message cells (see wbcir_parse_rc6) */
-static u8
-wbcir_to_rc6cells(u8 val)
-{
-	u8 coded = 0x00;
-	int i;
-
-	val &= 0x0F;
-	for (i = 0; i < 4; i++) {
-		if (val & 0x01)
-			coded |= 0x02 << (i * 2);
-		else
-			coded |= 0x01 << (i * 2);
-		val >>= 1;
-	}
-
-	return coded;
-}
-
-
-
-/*****************************************************************************
- *
- * INPUT FUNCTIONS
- *
- *****************************************************************************/
-
-static unsigned int
-wbcir_do_getkeycode(struct wbcir_data *data, u32 scancode)
-{
-	struct wbcir_keyentry *keyentry;
-	unsigned int keycode = KEY_RESERVED;
-	unsigned long flags;
-
-	read_lock_irqsave(&keytable_lock, flags);
-
-	list_for_each_entry(keyentry, &data->keytable, list) {
-		if (keyentry->key.scancode == scancode) {
-			keycode = keyentry->key.keycode;
-			break;
-		}
-	}
-
-	read_unlock_irqrestore(&keytable_lock, flags);
-	return keycode;
-}
-
-static int
-wbcir_getkeycode(struct input_dev *dev,
-		 unsigned int scancode, unsigned int *keycode)
-{
-	struct wbcir_data *data = input_get_drvdata(dev);
-
-	*keycode = wbcir_do_getkeycode(data, scancode);
-	return 0;
-}
-
-static int
-wbcir_setkeycode(struct input_dev *dev,
-		 unsigned int scancode, unsigned int keycode)
-{
-	struct wbcir_data *data = input_get_drvdata(dev);
-	struct wbcir_keyentry *keyentry;
-	struct wbcir_keyentry *new_keyentry;
-	unsigned long flags;
-	unsigned int old_keycode = KEY_RESERVED;
-
-	new_keyentry = kmalloc(sizeof(*new_keyentry), GFP_KERNEL);
-	if (!new_keyentry)
-		return -ENOMEM;
-
-	write_lock_irqsave(&keytable_lock, flags);
-
-	list_for_each_entry(keyentry, &data->keytable, list) {
-		if (keyentry->key.scancode != scancode)
-			continue;
-
-		old_keycode = keyentry->key.keycode;
-		keyentry->key.keycode = keycode;
-
-		if (keyentry->key.keycode == KEY_RESERVED) {
-			list_del(&keyentry->list);
-			kfree(keyentry);
-		}
-
-		break;
-	}
-
-	set_bit(keycode, dev->keybit);
-
-	if (old_keycode == KEY_RESERVED) {
-		new_keyentry->key.scancode = scancode;
-		new_keyentry->key.keycode = keycode;
-		list_add(&new_keyentry->list, &data->keytable);
-	} else {
-		kfree(new_keyentry);
-		clear_bit(old_keycode, dev->keybit);
-		list_for_each_entry(keyentry, &data->keytable, list) {
-			if (keyentry->key.keycode == old_keycode) {
-				set_bit(old_keycode, dev->keybit);
-				break;
-			}
-		}
-	}
-
-	write_unlock_irqrestore(&keytable_lock, flags);
-	return 0;
-}
-
-/*
- * Timer function to report keyup event some time after keydown is
- * reported by the ISR.
- */
-static void
-wbcir_keyup(unsigned long cookie)
-{
-	struct wbcir_data *data = (struct wbcir_data *)cookie;
-	unsigned long flags;
-
-	/*
-	 * data->keyup_jiffies is used to prevent a race condition if a
-	 * hardware interrupt occurs at this point and the keyup timer
-	 * event is moved further into the future as a result.
-	 *
-	 * The timer will then be reactivated and this function called
-	 * again in the future. We need to exit gracefully in that case
-	 * to allow the input subsystem to do its auto-repeat magic or
-	 * a keyup event might follow immediately after the keydown.
-	 */
-
-	spin_lock_irqsave(&wbcir_lock, flags);
-
-	if (time_is_after_eq_jiffies(data->keyup_jiffies) && data->keypressed) {
-		data->keypressed = 0;
-		led_trigger_event(data->rxtrigger, LED_OFF);
-		input_report_key(data->input_dev, data->last_keycode, 0);
-		input_sync(data->input_dev);
-	}
-
-	spin_unlock_irqrestore(&wbcir_lock, flags);
-}
-
-static void
-wbcir_keydown(struct wbcir_data *data, u32 scancode, u8 toggle)
-{
-	unsigned int keycode;
-
-	/* Repeat? */
-	if (data->last_scancode == scancode &&
-	    data->last_toggle == toggle &&
-	    data->keypressed)
-		goto set_timer;
-	data->last_scancode = scancode;
-
-	/* Do we need to release an old keypress? */
-	if (data->keypressed) {
-		input_report_key(data->input_dev, data->last_keycode, 0);
-		input_sync(data->input_dev);
-		data->keypressed = 0;
-	}
-
-	/* Report scancode */
-	input_event(data->input_dev, EV_MSC, MSC_SCAN, (int)scancode);
-
-	/* Do we know this scancode? */
-	keycode = wbcir_do_getkeycode(data, scancode);
-	if (keycode == KEY_RESERVED)
-		goto set_timer;
-
-	/* Register a keypress */
-	input_report_key(data->input_dev, keycode, 1);
-	data->keypressed = 1;
-	data->last_keycode = keycode;
-	data->last_toggle = toggle;
-
-set_timer:
-	input_sync(data->input_dev);
-	led_trigger_event(data->rxtrigger,
-			  data->keypressed ? LED_FULL : LED_OFF);
-	data->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
-	mod_timer(&data->timer_keyup, data->keyup_jiffies);
-}
-
-
-
-/*****************************************************************************
- *
- * IR PARSING FUNCTIONS
- *
- *****************************************************************************/
-
-/* Resets all irdata */
-static void
-wbcir_reset_irdata(struct wbcir_data *data)
-{
-	memset(data->irdata, 0, sizeof(data->irdata));
-	data->irdata_count = 0;
-	data->irdata_off = 0;
-	data->irdata_error = 0;
-	data->idle_count = 0;
-}
-
-/* Adds one bit of irdata */
-static void
-add_irdata_bit(struct wbcir_data *data, int set)
-{
-	if (data->irdata_count >= sizeof(data->irdata) * 8) {
-		data->irdata_error = 1;
-		return;
-	}
-
-	if (set)
-		__set_bit(data->irdata_count, data->irdata);